From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> To: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>, Pavel Machek <pavel@ucw.cz>, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Stephen Boyd <sboyd@kernel.org>, Taniya Das <tdas@codeaurora.org>, Michael Turquette <mturquette@baylibre.com>, Andy Gross <agross@kernel.org>, Linux PM <linux-pm@vger.kernel.org>, open list <linux-kernel@vger.kernel.org>, "open list:COMMON CLK FRAMEWORK" <linux-clk@vger.kernel.org>, "open list:DRM DRIVER FOR MSM ADRENO GPU" <linux-arm-msm@vger.kernel.org> Subject: Re: [PATCH v2 3/5] clk: qcom: use devm_pm_runtime_enable and devm_pm_clk_create Date: Thu, 29 Jul 2021 17:28:16 +0300 [thread overview] Message-ID: <CAA8EJpqzcuctWaOeqq2-mqW3o-DSNPNEmoiDWEcry+SQ+2-uDg@mail.gmail.com> (raw) In-Reply-To: <YQFxEIRWRZscPgJl@yoga> On Wed, 28 Jul 2021 at 18:00, Bjorn Andersson <bjorn.andersson@linaro.org> wrote: > > On Wed 28 Jul 09:24 CDT 2021, Dmitry Baryshkov wrote: > > > Use two new helpers instead of pm_runtime_enable() and pm_clk_create(), > > removing the need for calling pm_runtime_disable and pm_clk_destroy(). > > > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > > It's quite reasonable to expect that Rafael wants to take the two first > patches through his tree, but I expect that these clock patches will > conflict with your other changes resulting in a less smooth path into > mainline. I do not expect any conflicts in the clock code. The gdsc fixes do not touch these parts. > Grepping the tree for candidates I find many better examples, that > we don't foresee any conflicting changes.. > > So may I suggest that you fix drivers/hwspinlock/omap_hwspinlock.c and > drivers/hwspinlock/stm32_hwspinlock.c, then I (as maintainer) can Ack > those changes and Rafael can take the series in his tree for v5.15. These two would use devm_pm_runtime_enable, but not the devm_pm_clk_create. Thus I'd still prefer to modify these few drivers (note, the generification is a separate patch and I can safely drop it for now). > Then as v5.15-rc1 lands, we have the API and we can follow up changing > these more complex drivers - and those patches can go through the > individual maintainer trees. > > Regards, > Bjorn > > > --- > > drivers/clk/qcom/camcc-sc7180.c | 25 +++++++++------------ > > drivers/clk/qcom/lpass-gfm-sm8250.c | 21 ++++++++---------- > > drivers/clk/qcom/lpasscorecc-sc7180.c | 18 ++------------- > > drivers/clk/qcom/mss-sc7180.c | 30 +++++++------------------ > > drivers/clk/qcom/q6sstop-qcs404.c | 32 ++++++++------------------- > > drivers/clk/qcom/turingcc-qcs404.c | 30 +++++++------------------ > > 6 files changed, 46 insertions(+), 110 deletions(-) > > > > diff --git a/drivers/clk/qcom/camcc-sc7180.c b/drivers/clk/qcom/camcc-sc7180.c > > index 9bcf2f8ed4de..ce73ee9037cb 100644 > > --- a/drivers/clk/qcom/camcc-sc7180.c > > +++ b/drivers/clk/qcom/camcc-sc7180.c > > @@ -1652,32 +1652,35 @@ static int cam_cc_sc7180_probe(struct platform_device *pdev) > > struct regmap *regmap; > > int ret; > > > > - pm_runtime_enable(&pdev->dev); > > - ret = pm_clk_create(&pdev->dev); > > + ret = devm_pm_runtime_enable(&pdev->dev); > > + if (ret < 0) > > + return ret; > > + > > + ret = devm_pm_clk_create(&pdev->dev); > > if (ret < 0) > > return ret; > > > > ret = pm_clk_add(&pdev->dev, "xo"); > > if (ret < 0) { > > dev_err(&pdev->dev, "Failed to acquire XO clock\n"); > > - goto disable_pm_runtime; > > + return ret; > > } > > > > ret = pm_clk_add(&pdev->dev, "iface"); > > if (ret < 0) { > > dev_err(&pdev->dev, "Failed to acquire iface clock\n"); > > - goto disable_pm_runtime; > > + return ret; > > } > > > > ret = pm_runtime_get(&pdev->dev); > > if (ret) > > - goto destroy_pm_clk; > > + return ret; > > > > regmap = qcom_cc_map(pdev, &cam_cc_sc7180_desc); > > if (IS_ERR(regmap)) { > > ret = PTR_ERR(regmap); > > pm_runtime_put(&pdev->dev); > > - goto destroy_pm_clk; > > + return ret; > > } > > > > clk_fabia_pll_configure(&cam_cc_pll0, regmap, &cam_cc_pll0_config); > > @@ -1689,18 +1692,10 @@ static int cam_cc_sc7180_probe(struct platform_device *pdev) > > pm_runtime_put(&pdev->dev); > > if (ret < 0) { > > dev_err(&pdev->dev, "Failed to register CAM CC clocks\n"); > > - goto destroy_pm_clk; > > + return ret; > > } > > > > return 0; > > - > > -destroy_pm_clk: > > - pm_clk_destroy(&pdev->dev); > > - > > -disable_pm_runtime: > > - pm_runtime_disable(&pdev->dev); > > - > > - return ret; > > } > > > > static const struct dev_pm_ops cam_cc_pm_ops = { > > diff --git a/drivers/clk/qcom/lpass-gfm-sm8250.c b/drivers/clk/qcom/lpass-gfm-sm8250.c > > index f5e31e692b9b..96f476f24eb2 100644 > > --- a/drivers/clk/qcom/lpass-gfm-sm8250.c > > +++ b/drivers/clk/qcom/lpass-gfm-sm8250.c > > @@ -251,15 +251,18 @@ static int lpass_gfm_clk_driver_probe(struct platform_device *pdev) > > if (IS_ERR(cc->base)) > > return PTR_ERR(cc->base); > > > > - pm_runtime_enable(dev); > > - err = pm_clk_create(dev); > > + err = devm_pm_runtime_enable(dev); > > if (err) > > - goto pm_clk_err; > > + return err; > > + > > + err = devm_pm_clk_create(dev); > > + if (err) > > + return err; > > > > err = of_pm_clk_add_clks(dev); > > if (err < 0) { > > dev_dbg(dev, "Failed to get lpass core voting clocks\n"); > > - goto clk_reg_err; > > + return err; > > } > > > > for (i = 0; i < data->onecell_data->num; i++) { > > @@ -273,22 +276,16 @@ static int lpass_gfm_clk_driver_probe(struct platform_device *pdev) > > > > err = devm_clk_hw_register(dev, &data->gfm_clks[i]->hw); > > if (err) > > - goto clk_reg_err; > > + return err; > > > > } > > > > err = devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, > > data->onecell_data); > > if (err) > > - goto clk_reg_err; > > + return err; > > > > return 0; > > - > > -clk_reg_err: > > - pm_clk_destroy(dev); > > -pm_clk_err: > > - pm_runtime_disable(dev); > > - return err; > > } > > > > static const struct of_device_id lpass_gfm_clk_match_table[] = { > > diff --git a/drivers/clk/qcom/lpasscorecc-sc7180.c b/drivers/clk/qcom/lpasscorecc-sc7180.c > > index 2e0ecc38efdd..ac09b7b840ab 100644 > > --- a/drivers/clk/qcom/lpasscorecc-sc7180.c > > +++ b/drivers/clk/qcom/lpasscorecc-sc7180.c > > @@ -356,32 +356,18 @@ static const struct qcom_cc_desc lpass_audio_hm_sc7180_desc = { > > .num_gdscs = ARRAY_SIZE(lpass_audio_hm_sc7180_gdscs), > > }; > > > > -static void lpass_pm_runtime_disable(void *data) > > -{ > > - pm_runtime_disable(data); > > -} > > - > > -static void lpass_pm_clk_destroy(void *data) > > -{ > > - pm_clk_destroy(data); > > -} > > - > > static int lpass_create_pm_clks(struct platform_device *pdev) > > { > > int ret; > > > > pm_runtime_use_autosuspend(&pdev->dev); > > pm_runtime_set_autosuspend_delay(&pdev->dev, 500); > > - pm_runtime_enable(&pdev->dev); > > > > - ret = devm_add_action_or_reset(&pdev->dev, lpass_pm_runtime_disable, &pdev->dev); > > + ret = devm_pm_runtime_enable(&pdev->dev); > > if (ret) > > return ret; > > > > - ret = pm_clk_create(&pdev->dev); > > - if (ret) > > - return ret; > > - ret = devm_add_action_or_reset(&pdev->dev, lpass_pm_clk_destroy, &pdev->dev); > > + ret = devm_pm_clk_create(&pdev->dev); > > if (ret) > > return ret; > > > > diff --git a/drivers/clk/qcom/mss-sc7180.c b/drivers/clk/qcom/mss-sc7180.c > > index 673fa1a4f734..5a1407440662 100644 > > --- a/drivers/clk/qcom/mss-sc7180.c > > +++ b/drivers/clk/qcom/mss-sc7180.c > > @@ -73,36 +73,23 @@ static int mss_sc7180_probe(struct platform_device *pdev) > > { > > int ret; > > > > - pm_runtime_enable(&pdev->dev); > > - ret = pm_clk_create(&pdev->dev); > > + ret = devm_pm_runtime_enable(&pdev->dev); > > if (ret) > > - goto disable_pm_runtime; > > + return ret; > > + > > + ret = devm_pm_clk_create(&pdev->dev); > > + if (ret) > > + return ret; > > > > ret = pm_clk_add(&pdev->dev, "cfg_ahb"); > > if (ret < 0) { > > dev_err(&pdev->dev, "failed to acquire iface clock\n"); > > - goto destroy_pm_clk; > > + return ret; > > } > > > > ret = qcom_cc_probe(pdev, &mss_sc7180_desc); > > if (ret < 0) > > - goto destroy_pm_clk; > > - > > - return 0; > > - > > -destroy_pm_clk: > > - pm_clk_destroy(&pdev->dev); > > - > > -disable_pm_runtime: > > - pm_runtime_disable(&pdev->dev); > > - > > - return ret; > > -} > > - > > -static int mss_sc7180_remove(struct platform_device *pdev) > > -{ > > - pm_clk_destroy(&pdev->dev); > > - pm_runtime_disable(&pdev->dev); > > + return ret; > > > > return 0; > > } > > @@ -119,7 +106,6 @@ MODULE_DEVICE_TABLE(of, mss_sc7180_match_table); > > > > static struct platform_driver mss_sc7180_driver = { > > .probe = mss_sc7180_probe, > > - .remove = mss_sc7180_remove, > > .driver = { > > .name = "sc7180-mss", > > .of_match_table = mss_sc7180_match_table, > > diff --git a/drivers/clk/qcom/q6sstop-qcs404.c b/drivers/clk/qcom/q6sstop-qcs404.c > > index 723f932fbf7d..507386bee07d 100644 > > --- a/drivers/clk/qcom/q6sstop-qcs404.c > > +++ b/drivers/clk/qcom/q6sstop-qcs404.c > > @@ -159,15 +159,18 @@ static int q6sstopcc_qcs404_probe(struct platform_device *pdev) > > const struct qcom_cc_desc *desc; > > int ret; > > > > - pm_runtime_enable(&pdev->dev); > > - ret = pm_clk_create(&pdev->dev); > > + ret = devm_pm_runtime_enable(&pdev->dev); > > if (ret) > > - goto disable_pm_runtime; > > + return ret; > > + > > + ret = devm_pm_clk_create(&pdev->dev); > > + if (ret) > > + return ret; > > > > ret = pm_clk_add(&pdev->dev, NULL); > > if (ret < 0) { > > dev_err(&pdev->dev, "failed to acquire iface clock\n"); > > - goto destroy_pm_clk; > > + return ret; > > } > > > > q6sstop_regmap_config.name = "q6sstop_tcsr"; > > @@ -175,30 +178,14 @@ static int q6sstopcc_qcs404_probe(struct platform_device *pdev) > > > > ret = qcom_cc_probe_by_index(pdev, 1, desc); > > if (ret) > > - goto destroy_pm_clk; > > + return ret; > > > > q6sstop_regmap_config.name = "q6sstop_cc"; > > desc = &q6sstop_qcs404_desc; > > > > ret = qcom_cc_probe_by_index(pdev, 0, desc); > > if (ret) > > - goto destroy_pm_clk; > > - > > - return 0; > > - > > -destroy_pm_clk: > > - pm_clk_destroy(&pdev->dev); > > - > > -disable_pm_runtime: > > - pm_runtime_disable(&pdev->dev); > > - > > - return ret; > > -} > > - > > -static int q6sstopcc_qcs404_remove(struct platform_device *pdev) > > -{ > > - pm_clk_destroy(&pdev->dev); > > - pm_runtime_disable(&pdev->dev); > > + return ret; > > > > return 0; > > } > > @@ -209,7 +196,6 @@ static const struct dev_pm_ops q6sstopcc_pm_ops = { > > > > static struct platform_driver q6sstopcc_qcs404_driver = { > > .probe = q6sstopcc_qcs404_probe, > > - .remove = q6sstopcc_qcs404_remove, > > .driver = { > > .name = "qcs404-q6sstopcc", > > .of_match_table = q6sstopcc_qcs404_match_table, > > diff --git a/drivers/clk/qcom/turingcc-qcs404.c b/drivers/clk/qcom/turingcc-qcs404.c > > index 4cfbbf5bf4d9..4543bda793f4 100644 > > --- a/drivers/clk/qcom/turingcc-qcs404.c > > +++ b/drivers/clk/qcom/turingcc-qcs404.c > > @@ -110,36 +110,23 @@ static int turingcc_probe(struct platform_device *pdev) > > { > > int ret; > > > > - pm_runtime_enable(&pdev->dev); > > - ret = pm_clk_create(&pdev->dev); > > + ret = devm_pm_runtime_enable(&pdev->dev); > > if (ret) > > - goto disable_pm_runtime; > > + return ret; > > + > > + ret = devm_pm_clk_create(&pdev->dev); > > + if (ret) > > + return ret; > > > > ret = pm_clk_add(&pdev->dev, NULL); > > if (ret < 0) { > > dev_err(&pdev->dev, "failed to acquire iface clock\n"); > > - goto destroy_pm_clk; > > + return ret; > > } > > > > ret = qcom_cc_probe(pdev, &turingcc_desc); > > if (ret < 0) > > - goto destroy_pm_clk; > > - > > - return 0; > > - > > -destroy_pm_clk: > > - pm_clk_destroy(&pdev->dev); > > - > > -disable_pm_runtime: > > - pm_runtime_disable(&pdev->dev); > > - > > - return ret; > > -} > > - > > -static int turingcc_remove(struct platform_device *pdev) > > -{ > > - pm_clk_destroy(&pdev->dev); > > - pm_runtime_disable(&pdev->dev); > > + return ret; > > > > return 0; > > } > > @@ -156,7 +143,6 @@ MODULE_DEVICE_TABLE(of, turingcc_match_table); > > > > static struct platform_driver turingcc_driver = { > > .probe = turingcc_probe, > > - .remove = turingcc_remove, > > .driver = { > > .name = "qcs404-turingcc", > > .of_match_table = turingcc_match_table, > > -- > > 2.30.2 > > -- With best wishes Dmitry
next prev parent reply other threads:[~2021-07-29 14:28 UTC|newest] Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-07-28 14:24 [PATCH v2 0/5] PM: add two devres helpers and use them in qcom cc Dmitry Baryshkov 2021-07-28 14:24 ` [PATCH v2 1/5] PM: runtime: add devm_pm_runtime_enable helper Dmitry Baryshkov 2021-07-28 20:04 ` Bjorn Andersson 2021-07-28 14:24 ` [PATCH v2 2/5] PM: clk: add devm_pm_clk_create helper Dmitry Baryshkov 2021-07-28 20:05 ` Bjorn Andersson 2021-07-28 14:24 ` [PATCH v2 3/5] clk: qcom: use devm_pm_runtime_enable and devm_pm_clk_create Dmitry Baryshkov 2021-07-28 15:00 ` Bjorn Andersson 2021-07-29 14:28 ` Dmitry Baryshkov [this message] 2021-07-28 14:24 ` [PATCH v2 4/5] clk: qcom: use common code for qcom_cc_probe_by_index Dmitry Baryshkov 2021-07-28 14:24 ` [PATCH v2 5/5] clk: qcom: move pm_clk functionality into common code Dmitry Baryshkov
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=CAA8EJpqzcuctWaOeqq2-mqW3o-DSNPNEmoiDWEcry+SQ+2-uDg@mail.gmail.com \ --to=dmitry.baryshkov@linaro.org \ --cc=agross@kernel.org \ --cc=bjorn.andersson@linaro.org \ --cc=gregkh@linuxfoundation.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-clk@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pm@vger.kernel.org \ --cc=mturquette@baylibre.com \ --cc=pavel@ucw.cz \ --cc=rjw@rjwysocki.net \ --cc=sboyd@kernel.org \ --cc=tdas@codeaurora.org \ --subject='Re: [PATCH v2 3/5] clk: qcom: use devm_pm_runtime_enable and devm_pm_clk_create' \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).