linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* mt7615: Fail to load firmware on AZWAVE-CB434NF module
@ 2020-09-08 12:33 Chris Chiu
  2020-09-14  2:13 ` Chris Chiu
  0 siblings, 1 reply; 2+ messages in thread
From: Chris Chiu @ 2020-09-08 12:33 UTC (permalink / raw)
  To: sean.wang, ryder.lee, Kalle Valo, David Miller, kuba, nbd,
	lorenzo, linux-wireless, netdev, Linux Kernel

Hi Sean, Ryder,
    We have an ASUS laptop X532EQ with the wifi module AZWAVE-CB434NF
which fails to bring up the wifi interface on kernel 5.9.0-rc1. The
dmesg shows the firmware load error.

[   25.630850] mt7615e 0000:2d:00.0: Message -4294967280 (seq 1) timeout
[   25.630851] mt7615e 0000:2d:00.0: Failed to get patch semaphore
[   25.630853] mt7615e 0000:2d:00.0: mediatek/mt7663pr2h.bin not
found, switching to mediatek/mt7663pr2h_rebb.bin
[   46.111154] mt7615e 0000:2d:00.0: Message -4294967280 (seq 2) timeout
[   46.111178] mt7615e 0000:2d:00.0: Failed to get patch semaphore
[   46.111179] mt7615e 0000:2d:00.0: failed to load mediatek/mt7663pr2h_rebb.bin

The lspci information for the device shows as follows
0000:2d:00.0 Network controller [0280]: MEDIATEK Corp. Device [14c3:7663]
        Subsystem: AzureWave Device [1a3b:4341]
        Flags: bus master, fast devsel, latency 0, IRQ 177
        Memory at 6032100000 (64-bit, prefetchable) [size=1M]
        Memory at 6032200000 (64-bit, prefetchable) [size=16K]
        Memory at 6032204000 (64-bit, prefetchable) [size=4K]
        Capabilities: [80] Express Endpoint, MSI 1f
        Capabilities: [e0] MSI: Enable+ Count=1/32 Maskable+ 64bit+
        Capabilities: [f8] Power Management version 3
        Capabilities: [100] Vendor Specific Information: ID=1556 Rev=1
Len=008 <?>
        Capabilities: [108] Latency Tolerance Reporting
        Capabilities: [110] L1 PM Substates
        Capabilities: [200] Advanced Error Reporting
        Kernel driver in use: mt7615e
        Kernel modules: mt7615e

I also tried the latest linux-firmware with the most up to date
mediatek firmware
https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/commit/?id=7a237c6ee2c7af48723c356461ef80270a52d2c6.
But still get the same error.

Any suggestions on what I can do here?

Chris

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: mt7615: Fail to load firmware on AZWAVE-CB434NF module
  2020-09-08 12:33 mt7615: Fail to load firmware on AZWAVE-CB434NF module Chris Chiu
@ 2020-09-14  2:13 ` Chris Chiu
  0 siblings, 0 replies; 2+ messages in thread
From: Chris Chiu @ 2020-09-14  2:13 UTC (permalink / raw)
  To: sean.wang, ryder.lee, Kalle Valo, David Miller, kuba, nbd,
	lorenzo, linux-wireless, netdev, Linux Kernel

On Tue, Sep 8, 2020 at 8:33 PM Chris Chiu <chiu@endlessm.com> wrote:
>
> Hi Sean, Ryder,
>     We have an ASUS laptop X532EQ with the wifi module AZWAVE-CB434NF
> which fails to bring up the wifi interface on kernel 5.9.0-rc1. The
> dmesg shows the firmware load error.
>
> [   25.630850] mt7615e 0000:2d:00.0: Message -4294967280 (seq 1) timeout
> [   25.630851] mt7615e 0000:2d:00.0: Failed to get patch semaphore
> [   25.630853] mt7615e 0000:2d:00.0: mediatek/mt7663pr2h.bin not
> found, switching to mediatek/mt7663pr2h_rebb.bin
> [   46.111154] mt7615e 0000:2d:00.0: Message -4294967280 (seq 2) timeout
> [   46.111178] mt7615e 0000:2d:00.0: Failed to get patch semaphore
> [   46.111179] mt7615e 0000:2d:00.0: failed to load mediatek/mt7663pr2h_rebb.bin
>
> The lspci information for the device shows as follows
> 0000:2d:00.0 Network controller [0280]: MEDIATEK Corp. Device [14c3:7663]
>         Subsystem: AzureWave Device [1a3b:4341]
>         Flags: bus master, fast devsel, latency 0, IRQ 177
>         Memory at 6032100000 (64-bit, prefetchable) [size=1M]
>         Memory at 6032200000 (64-bit, prefetchable) [size=16K]
>         Memory at 6032204000 (64-bit, prefetchable) [size=4K]
>         Capabilities: [80] Express Endpoint, MSI 1f
>         Capabilities: [e0] MSI: Enable+ Count=1/32 Maskable+ 64bit+
>         Capabilities: [f8] Power Management version 3
>         Capabilities: [100] Vendor Specific Information: ID=1556 Rev=1
> Len=008 <?>
>         Capabilities: [108] Latency Tolerance Reporting
>         Capabilities: [110] L1 PM Substates
>         Capabilities: [200] Advanced Error Reporting
>         Kernel driver in use: mt7615e
>         Kernel modules: mt7615e
>
> I also tried the latest linux-firmware with the most up to date
> mediatek firmware
> https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/commit/?id=7a237c6ee2c7af48723c356461ef80270a52d2c6.
> But still get the same error.
>
> Any suggestions on what I can do here?
>
> Chris

Gentle ping. What should I do for the next step?

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2020-09-14  2:13 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-09-08 12:33 mt7615: Fail to load firmware on AZWAVE-CB434NF module Chris Chiu
2020-09-14  2:13 ` Chris Chiu

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).