* [PATCH] iio: adc: meson-saradc: Variables could be uninitalized if regmap_read() fails
@ 2019-09-28 0:46 Yizhuo
2019-09-28 6:47 ` Nicholas Mc Guire
0 siblings, 1 reply; 5+ messages in thread
From: Yizhuo @ 2019-09-28 0:46 UTC (permalink / raw)
Cc: csong, zhiyunq, Yizhuo, Jonathan Cameron, Hartmut Knaack,
Lars-Peter Clausen, Peter Meerwald-Stadler, Kevin Hilman,
Martin Blumenstingl, Neil Armstrong, Thomas Gleixner,
Nicholas Mc Guire, linux-iio, linux-arm-kernel, linux-amlogic,
linux-kernel
Several functions in this file are trying to use regmap_read() to
initialize the specific variable, however, if regmap_read() fails,
the variable could be uninitialized but used directly, which is
potentially unsafe. The return value of regmap_read() should be
checked and handled.
Signed-off-by: Yizhuo <yzhai003@ucr.edu>
---
drivers/iio/adc/meson_saradc.c | 28 +++++++++++++++++++++++-----
1 file changed, 23 insertions(+), 5 deletions(-)
diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
index 7b28d045d271..c032a64108b4 100644
--- a/drivers/iio/adc/meson_saradc.c
+++ b/drivers/iio/adc/meson_saradc.c
@@ -323,6 +323,7 @@ static int meson_sar_adc_wait_busy_clear(struct iio_dev *indio_dev)
{
struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
int regval, timeout = 10000;
+ int ret;
/*
* NOTE: we need a small delay before reading the status, otherwise
@@ -331,7 +332,9 @@ static int meson_sar_adc_wait_busy_clear(struct iio_dev *indio_dev)
*/
do {
udelay(1);
- regmap_read(priv->regmap, MESON_SAR_ADC_REG0, ®val);
+ ret = regmap_read(priv->regmap, MESON_SAR_ADC_REG0, ®val);
+ if (ret)
+ return ret;
} while (FIELD_GET(MESON_SAR_ADC_REG0_BUSY_MASK, regval) && timeout--);
if (timeout < 0)
@@ -358,7 +361,11 @@ static int meson_sar_adc_read_raw_sample(struct iio_dev *indio_dev,
return -EINVAL;
}
- regmap_read(priv->regmap, MESON_SAR_ADC_FIFO_RD, ®val);
+ int ret = regmap_read(priv->regmap, MESON_SAR_ADC_FIFO_RD, ®val);
+
+ if (ret)
+ return ret;
+
fifo_chan = FIELD_GET(MESON_SAR_ADC_FIFO_RD_CHAN_ID_MASK, regval);
if (fifo_chan != chan->address) {
dev_err(&indio_dev->dev,
@@ -491,6 +498,7 @@ static int meson_sar_adc_lock(struct iio_dev *indio_dev)
{
struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
int val, timeout = 10000;
+ int ret;
mutex_lock(&indio_dev->mlock);
@@ -506,7 +514,10 @@ static int meson_sar_adc_lock(struct iio_dev *indio_dev)
*/
do {
udelay(1);
- regmap_read(priv->regmap, MESON_SAR_ADC_DELAY, &val);
+ ret = regmap_read(priv->regmap,
+ MESON_SAR_ADC_DELAY, &val);
+ if (ret)
+ return ret;
} while (val & MESON_SAR_ADC_DELAY_BL30_BUSY && timeout--);
if (timeout < 0) {
@@ -784,7 +795,10 @@ static int meson_sar_adc_init(struct iio_dev *indio_dev)
* BL30 to make sure BL30 gets the values it expects when
* reading the temperature sensor.
*/
- regmap_read(priv->regmap, MESON_SAR_ADC_REG3, ®val);
+ ret = regmap_read(priv->regmap, MESON_SAR_ADC_REG3, ®val);
+ if (ret)
+ return ret;
+
if (regval & MESON_SAR_ADC_REG3_BL30_INITIALIZED)
return 0;
}
@@ -1014,7 +1028,11 @@ static irqreturn_t meson_sar_adc_irq(int irq, void *data)
unsigned int cnt, threshold;
u32 regval;
- regmap_read(priv->regmap, MESON_SAR_ADC_REG0, ®val);
+ int ret = regmap_read(priv->regmap, MESON_SAR_ADC_REG0, ®val);
+
+ if (ret)
+ return ret;
+
cnt = FIELD_GET(MESON_SAR_ADC_REG0_FIFO_COUNT_MASK, regval);
threshold = FIELD_GET(MESON_SAR_ADC_REG0_FIFO_CNT_IRQ_MASK, regval);
--
2.17.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH] iio: adc: meson-saradc: Variables could be uninitalized if regmap_read() fails
2019-09-28 0:46 [PATCH] iio: adc: meson-saradc: Variables could be uninitalized if regmap_read() fails Yizhuo
@ 2019-09-28 6:47 ` Nicholas Mc Guire
2019-09-29 16:54 ` Yizhuo Zhai
0 siblings, 1 reply; 5+ messages in thread
From: Nicholas Mc Guire @ 2019-09-28 6:47 UTC (permalink / raw)
To: Yizhuo
Cc: csong, zhiyunq, Jonathan Cameron, Hartmut Knaack,
Lars-Peter Clausen, Peter Meerwald-Stadler, Kevin Hilman,
Martin Blumenstingl, Neil Armstrong, Thomas Gleixner,
Nicholas Mc Guire, linux-iio, linux-arm-kernel, linux-amlogic,
linux-kernel
On Fri, Sep 27, 2019 at 05:46:41PM -0700, Yizhuo wrote:
> Several functions in this file are trying to use regmap_read() to
> initialize the specific variable, however, if regmap_read() fails,
> the variable could be uninitialized but used directly, which is
> potentially unsafe. The return value of regmap_read() should be
> checked and handled.
>
> Signed-off-by: Yizhuo <yzhai003@ucr.edu>
Just a few minor style issues - contentwise it look correct to me.
Reviewed-by: Nicholas Mc Guire <hofrat@osadl.org>
> ---
> drivers/iio/adc/meson_saradc.c | 28 +++++++++++++++++++++++-----
> 1 file changed, 23 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
> index 7b28d045d271..c032a64108b4 100644
> --- a/drivers/iio/adc/meson_saradc.c
> +++ b/drivers/iio/adc/meson_saradc.c
> @@ -323,6 +323,7 @@ static int meson_sar_adc_wait_busy_clear(struct iio_dev *indio_dev)
> {
> struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
> int regval, timeout = 10000;
> + int ret;
>
> /*
> * NOTE: we need a small delay before reading the status, otherwise
> @@ -331,7 +332,9 @@ static int meson_sar_adc_wait_busy_clear(struct iio_dev *indio_dev)
> */
> do {
> udelay(1);
> - regmap_read(priv->regmap, MESON_SAR_ADC_REG0, ®val);
> + ret = regmap_read(priv->regmap, MESON_SAR_ADC_REG0, ®val);
> + if (ret)
> + return ret;
> } while (FIELD_GET(MESON_SAR_ADC_REG0_BUSY_MASK, regval) && timeout--);
>
> if (timeout < 0)
> @@ -358,7 +361,11 @@ static int meson_sar_adc_read_raw_sample(struct iio_dev *indio_dev,
any reason not to declear ret in the declaration block ?
so just for consistency with coding style within meson_saradc.c
this might be:
int regval, fifo_chan, fifo_val, count;
+ int ret;
> return -EINVAL;
> }
>
> - regmap_read(priv->regmap, MESON_SAR_ADC_FIFO_RD, ®val);
> + int ret = regmap_read(priv->regmap, MESON_SAR_ADC_FIFO_RD, ®val);
+ ret = regmap_read(priv->regmap, MESON_SAR_ADC_FIFO_RD, ®val);
> +
> + if (ret)
> + return ret;
> +
> fifo_chan = FIELD_GET(MESON_SAR_ADC_FIFO_RD_CHAN_ID_MASK, regval);
> if (fifo_chan != chan->address) {
> dev_err(&indio_dev->dev,
> @@ -491,6 +498,7 @@ static int meson_sar_adc_lock(struct iio_dev *indio_dev)
> {
> struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
> int val, timeout = 10000;
> + int ret;
>
> mutex_lock(&indio_dev->mlock);
>
> @@ -506,7 +514,10 @@ static int meson_sar_adc_lock(struct iio_dev *indio_dev)
> */
> do {
> udelay(1);
> - regmap_read(priv->regmap, MESON_SAR_ADC_DELAY, &val);
> + ret = regmap_read(priv->regmap,
> + MESON_SAR_ADC_DELAY, &val);
checkpatch does not fuss here but the continuation should be alligned
witht the ( here
> + if (ret)
> + return ret;
> } while (val & MESON_SAR_ADC_DELAY_BL30_BUSY && timeout--);
>
> if (timeout < 0) {
> @@ -784,7 +795,10 @@ static int meson_sar_adc_init(struct iio_dev *indio_dev)
> * BL30 to make sure BL30 gets the values it expects when
> * reading the temperature sensor.
> */
> - regmap_read(priv->regmap, MESON_SAR_ADC_REG3, ®val);
> + ret = regmap_read(priv->regmap, MESON_SAR_ADC_REG3, ®val);
> + if (ret)
> + return ret;
> +
> if (regval & MESON_SAR_ADC_REG3_BL30_INITIALIZED)
> return 0;
> }
> @@ -1014,7 +1028,11 @@ static irqreturn_t meson_sar_adc_irq(int irq, void *data)
> unsigned int cnt, threshold;
> u32 regval;
same as above
+ int ret;
>
> - regmap_read(priv->regmap, MESON_SAR_ADC_REG0, ®val);
> + int ret = regmap_read(priv->regmap, MESON_SAR_ADC_REG0, ®val);
+ ret = regmap_read(priv->regmap, MESON_SAR_ADC_REG0, ®val);
> +
> + if (ret)
> + return ret;
> +
> cnt = FIELD_GET(MESON_SAR_ADC_REG0_FIFO_COUNT_MASK, regval);
> threshold = FIELD_GET(MESON_SAR_ADC_REG0_FIFO_CNT_IRQ_MASK, regval);
>
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] iio: adc: meson-saradc: Variables could be uninitalized if regmap_read() fails
2019-09-28 6:47 ` Nicholas Mc Guire
@ 2019-09-29 16:54 ` Yizhuo Zhai
0 siblings, 0 replies; 5+ messages in thread
From: Yizhuo Zhai @ 2019-09-29 16:54 UTC (permalink / raw)
To: Nicholas Mc Guire
Cc: Chengyu Song, Zhiyun Qian, Jonathan Cameron, Hartmut Knaack,
Lars-Peter Clausen, Peter Meerwald-Stadler, Kevin Hilman,
Martin Blumenstingl, Neil Armstrong, Thomas Gleixner,
Nicholas Mc Guire, linux-iio, linux-arm-kernel, linux-amlogic,
linux-kernel
Hi Nicholas:
Thanks for your feedback, I made changes and submitted new patches
already. Check patch script generated a warning if I strictly align
the parameter with (. I checked other code inside this file and
modified the continuation accordingly.
On Fri, Sep 27, 2019 at 11:47 PM Nicholas Mc Guire <der.herr@hofr.at> wrote:
>
> On Fri, Sep 27, 2019 at 05:46:41PM -0700, Yizhuo wrote:
> > Several functions in this file are trying to use regmap_read() to
> > initialize the specific variable, however, if regmap_read() fails,
> > the variable could be uninitialized but used directly, which is
> > potentially unsafe. The return value of regmap_read() should be
> > checked and handled.
> >
> > Signed-off-by: Yizhuo <yzhai003@ucr.edu>
>
> Just a few minor style issues - contentwise it look correct to me.
> Reviewed-by: Nicholas Mc Guire <hofrat@osadl.org>
>
> > ---
> > drivers/iio/adc/meson_saradc.c | 28 +++++++++++++++++++++++-----
> > 1 file changed, 23 insertions(+), 5 deletions(-)
> >
> > diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
> > index 7b28d045d271..c032a64108b4 100644
> > --- a/drivers/iio/adc/meson_saradc.c
> > +++ b/drivers/iio/adc/meson_saradc.c
> > @@ -323,6 +323,7 @@ static int meson_sar_adc_wait_busy_clear(struct iio_dev *indio_dev)
> > {
> > struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
> > int regval, timeout = 10000;
> > + int ret;
> >
> > /*
> > * NOTE: we need a small delay before reading the status, otherwise
> > @@ -331,7 +332,9 @@ static int meson_sar_adc_wait_busy_clear(struct iio_dev *indio_dev)
> > */
> > do {
> > udelay(1);
> > - regmap_read(priv->regmap, MESON_SAR_ADC_REG0, ®val);
> > + ret = regmap_read(priv->regmap, MESON_SAR_ADC_REG0, ®val);
> > + if (ret)
> > + return ret;
> > } while (FIELD_GET(MESON_SAR_ADC_REG0_BUSY_MASK, regval) && timeout--);
> >
> > if (timeout < 0)
> > @@ -358,7 +361,11 @@ static int meson_sar_adc_read_raw_sample(struct iio_dev *indio_dev,
>
> any reason not to declear ret in the declaration block ?
> so just for consistency with coding style within meson_saradc.c
> this might be:
>
> int regval, fifo_chan, fifo_val, count;
> + int ret;
>
> > return -EINVAL;
> > }
> >
> > - regmap_read(priv->regmap, MESON_SAR_ADC_FIFO_RD, ®val);
> > + int ret = regmap_read(priv->regmap, MESON_SAR_ADC_FIFO_RD, ®val);
>
> + ret = regmap_read(priv->regmap, MESON_SAR_ADC_FIFO_RD, ®val);
>
> > +
> > + if (ret)
> > + return ret;
> > +
> > fifo_chan = FIELD_GET(MESON_SAR_ADC_FIFO_RD_CHAN_ID_MASK, regval);
> > if (fifo_chan != chan->address) {
> > dev_err(&indio_dev->dev,
> > @@ -491,6 +498,7 @@ static int meson_sar_adc_lock(struct iio_dev *indio_dev)
> > {
> > struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
> > int val, timeout = 10000;
> > + int ret;
> >
> > mutex_lock(&indio_dev->mlock);
> >
> > @@ -506,7 +514,10 @@ static int meson_sar_adc_lock(struct iio_dev *indio_dev)
> > */
> > do {
> > udelay(1);
> > - regmap_read(priv->regmap, MESON_SAR_ADC_DELAY, &val);
> > + ret = regmap_read(priv->regmap,
> > + MESON_SAR_ADC_DELAY, &val);
>
> checkpatch does not fuss here but the continuation should be alligned
> witht the ( here
>
> > + if (ret)
> > + return ret;
> > } while (val & MESON_SAR_ADC_DELAY_BL30_BUSY && timeout--);
> >
> > if (timeout < 0) {
> > @@ -784,7 +795,10 @@ static int meson_sar_adc_init(struct iio_dev *indio_dev)
> > * BL30 to make sure BL30 gets the values it expects when
> > * reading the temperature sensor.
> > */
> > - regmap_read(priv->regmap, MESON_SAR_ADC_REG3, ®val);
> > + ret = regmap_read(priv->regmap, MESON_SAR_ADC_REG3, ®val);
> > + if (ret)
> > + return ret;
> > +
> > if (regval & MESON_SAR_ADC_REG3_BL30_INITIALIZED)
> > return 0;
> > }
> > @@ -1014,7 +1028,11 @@ static irqreturn_t meson_sar_adc_irq(int irq, void *data)
> > unsigned int cnt, threshold;
> > u32 regval;
>
> same as above
>
> + int ret;
>
> >
> > - regmap_read(priv->regmap, MESON_SAR_ADC_REG0, ®val);
> > + int ret = regmap_read(priv->regmap, MESON_SAR_ADC_REG0, ®val);
>
> + ret = regmap_read(priv->regmap, MESON_SAR_ADC_REG0, ®val);
>
> > +
> > + if (ret)
> > + return ret;
> > +
> > cnt = FIELD_GET(MESON_SAR_ADC_REG0_FIFO_COUNT_MASK, regval);
> > threshold = FIELD_GET(MESON_SAR_ADC_REG0_FIFO_CNT_IRQ_MASK, regval);
> >
> > --
> > 2.17.1
> >
--
Kind Regards,
Yizhuo Zhai
Computer Science, Graduate Student
University of California, Riverside
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] iio: adc: meson-saradc: Variables could be uninitalized if regmap_read() fails
2019-09-29 16:48 Yizhuo
@ 2019-09-30 21:16 ` Martin Blumenstingl
0 siblings, 0 replies; 5+ messages in thread
From: Martin Blumenstingl @ 2019-09-30 21:16 UTC (permalink / raw)
To: Yizhuo
Cc: csong, zhiyunq, Jonathan Cameron, Hartmut Knaack,
Lars-Peter Clausen, Peter Meerwald-Stadler, Kevin Hilman,
Neil Armstrong, Thomas Gleixner, Greg Kroah-Hartman,
Nicholas Mc Guire, linux-iio, linux-arm-kernel, linux-amlogic,
linux-kernel
Hi Yizhuo,
thank you for this patch
On Sun, Sep 29, 2019 at 6:48 PM Yizhuo <yzhai003@ucr.edu> wrote:
>
> Several functions in this file are trying to use regmap_read() to
> initialize the specific variable, however, if regmap_read() fails,
> the variable could be uninitialized but used directly, which is
> potentially unsafe. The return value of regmap_read() should be
> checked and handled.
the meson_saradc driver is using a MMIO regmap so read failures are
unlikely (unless there's a bug in the code somewhere)
did you find these issues with some static code analysis tool or did
you experience a real world problem?
> Signed-off-by: Yizhuo <yzhai003@ucr.edu>
> ---
> drivers/iio/adc/meson_saradc.c | 30 ++++++++++++++++++++++++------
> 1 file changed, 24 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
> index 7b28d045d271..4b6c2983ef39 100644
> --- a/drivers/iio/adc/meson_saradc.c
> +++ b/drivers/iio/adc/meson_saradc.c
> @@ -323,6 +323,7 @@ static int meson_sar_adc_wait_busy_clear(struct iio_dev *indio_dev)
> {
> struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
> int regval, timeout = 10000;
> + int ret;
why not add "ret" to the variables in the line above?
so this could be shortened to (which is also consistent with the
coding style in meson_saradc):
int ret, regval, timeout = 10000;
> @@ -506,7 +514,10 @@ static int meson_sar_adc_lock(struct iio_dev *indio_dev)
> */
> do {
> udelay(1);
> - regmap_read(priv->regmap, MESON_SAR_ADC_DELAY, &val);
> + ret = regmap_read(priv->regmap,
> + MESON_SAR_ADC_DELAY, &val);
> + if (ret)
> + return ret;
this is a big problem because we're returning with &indio_dev->mlock held
see the "timeout < 0" block below
> @@ -771,7 +782,7 @@ static int meson_sar_adc_init(struct iio_dev *indio_dev)
> {
> struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
> int regval, i, ret;
> -
> + int ret;
this removes an empty line between the variable declarations and the
first code (comment)
also "ret" is already defined in the line before
(I haven't compile-tested this myself yet but I'm surprised that this
doesn't give an error or at least a warning)
> @@ -1013,8 +1027,12 @@ static irqreturn_t meson_sar_adc_irq(int irq, void *data)
> struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
> unsigned int cnt, threshold;
> u32 regval;
> + int ret;
> +
> + ret = regmap_read(priv->regmap, MESON_SAR_ADC_REG0, ®val);
> + if (ret)
> + return ret;
this function doesn't return "int" but irqreturn_t
the only allowed values are: [0]
Martin
[0] https://elixir.bootlin.com/linux/v5.3/source/include/linux/irqreturn.h#L11
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH] iio: adc: meson-saradc: Variables could be uninitalized if regmap_read() fails
@ 2019-09-29 16:48 Yizhuo
2019-09-30 21:16 ` Martin Blumenstingl
0 siblings, 1 reply; 5+ messages in thread
From: Yizhuo @ 2019-09-29 16:48 UTC (permalink / raw)
Cc: csong, zhiyunq, Yizhuo, Jonathan Cameron, Hartmut Knaack,
Lars-Peter Clausen, Peter Meerwald-Stadler, Kevin Hilman,
Martin Blumenstingl, Neil Armstrong, Thomas Gleixner,
Greg Kroah-Hartman, Nicholas Mc Guire, linux-iio,
linux-arm-kernel, linux-amlogic, linux-kernel
Several functions in this file are trying to use regmap_read() to
initialize the specific variable, however, if regmap_read() fails,
the variable could be uninitialized but used directly, which is
potentially unsafe. The return value of regmap_read() should be
checked and handled.
Signed-off-by: Yizhuo <yzhai003@ucr.edu>
---
drivers/iio/adc/meson_saradc.c | 30 ++++++++++++++++++++++++------
1 file changed, 24 insertions(+), 6 deletions(-)
diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
index 7b28d045d271..4b6c2983ef39 100644
--- a/drivers/iio/adc/meson_saradc.c
+++ b/drivers/iio/adc/meson_saradc.c
@@ -323,6 +323,7 @@ static int meson_sar_adc_wait_busy_clear(struct iio_dev *indio_dev)
{
struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
int regval, timeout = 10000;
+ int ret;
/*
* NOTE: we need a small delay before reading the status, otherwise
@@ -331,7 +332,9 @@ static int meson_sar_adc_wait_busy_clear(struct iio_dev *indio_dev)
*/
do {
udelay(1);
- regmap_read(priv->regmap, MESON_SAR_ADC_REG0, ®val);
+ ret = regmap_read(priv->regmap, MESON_SAR_ADC_REG0, ®val);
+ if (ret)
+ return ret;
} while (FIELD_GET(MESON_SAR_ADC_REG0_BUSY_MASK, regval) && timeout--);
if (timeout < 0)
@@ -346,6 +349,7 @@ static int meson_sar_adc_read_raw_sample(struct iio_dev *indio_dev,
{
struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
int regval, fifo_chan, fifo_val, count;
+ int ret;
if(!wait_for_completion_timeout(&priv->done,
msecs_to_jiffies(MESON_SAR_ADC_TIMEOUT)))
@@ -358,7 +362,10 @@ static int meson_sar_adc_read_raw_sample(struct iio_dev *indio_dev,
return -EINVAL;
}
- regmap_read(priv->regmap, MESON_SAR_ADC_FIFO_RD, ®val);
+ ret = regmap_read(priv->regmap, MESON_SAR_ADC_FIFO_RD, ®val);
+ if (ret)
+ return ret;
+
fifo_chan = FIELD_GET(MESON_SAR_ADC_FIFO_RD_CHAN_ID_MASK, regval);
if (fifo_chan != chan->address) {
dev_err(&indio_dev->dev,
@@ -491,6 +498,7 @@ static int meson_sar_adc_lock(struct iio_dev *indio_dev)
{
struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
int val, timeout = 10000;
+ int ret;
mutex_lock(&indio_dev->mlock);
@@ -506,7 +514,10 @@ static int meson_sar_adc_lock(struct iio_dev *indio_dev)
*/
do {
udelay(1);
- regmap_read(priv->regmap, MESON_SAR_ADC_DELAY, &val);
+ ret = regmap_read(priv->regmap,
+ MESON_SAR_ADC_DELAY, &val);
+ if (ret)
+ return ret;
} while (val & MESON_SAR_ADC_DELAY_BL30_BUSY && timeout--);
if (timeout < 0) {
@@ -771,7 +782,7 @@ static int meson_sar_adc_init(struct iio_dev *indio_dev)
{
struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
int regval, i, ret;
-
+ int ret;
/*
* make sure we start at CH7 input since the other muxes are only used
* for internal calibration.
@@ -784,7 +795,10 @@ static int meson_sar_adc_init(struct iio_dev *indio_dev)
* BL30 to make sure BL30 gets the values it expects when
* reading the temperature sensor.
*/
- regmap_read(priv->regmap, MESON_SAR_ADC_REG3, ®val);
+ ret = regmap_read(priv->regmap, MESON_SAR_ADC_REG3, ®val);
+ if (ret)
+ return ret;
+
if (regval & MESON_SAR_ADC_REG3_BL30_INITIALIZED)
return 0;
}
@@ -1013,8 +1027,12 @@ static irqreturn_t meson_sar_adc_irq(int irq, void *data)
struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
unsigned int cnt, threshold;
u32 regval;
+ int ret;
+
+ ret = regmap_read(priv->regmap, MESON_SAR_ADC_REG0, ®val);
+ if (ret)
+ return ret;
- regmap_read(priv->regmap, MESON_SAR_ADC_REG0, ®val);
cnt = FIELD_GET(MESON_SAR_ADC_REG0_FIFO_COUNT_MASK, regval);
threshold = FIELD_GET(MESON_SAR_ADC_REG0_FIFO_CNT_IRQ_MASK, regval);
--
2.17.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
end of thread, other threads:[~2019-09-30 21:16 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-28 0:46 [PATCH] iio: adc: meson-saradc: Variables could be uninitalized if regmap_read() fails Yizhuo
2019-09-28 6:47 ` Nicholas Mc Guire
2019-09-29 16:54 ` Yizhuo Zhai
2019-09-29 16:48 Yizhuo
2019-09-30 21:16 ` Martin Blumenstingl
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).