[PATCH 1/2] clk: max77620: Add DT binding doc for MAX77620 clock

[PATCH 1/2] clk: max77620: Add DT binding doc for MAX77620 clock

[Laxman Dewangan]

MAXIM MAX77620 is the power management IC with multiple DCDC/LDO
regulators, RTC, GPIOs, Watchdog, 32KHz clock source etc.

Add DT binding doc for the details of the properties for MAX76620
clocks.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
---
 .../devicetree/bindings/clock/clk-max77620.txt     | 31 ++++++++++++++++++++++
 1 file changed, 31 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/clk-max77620.txt

diff --git a/Documentation/devicetree/bindings/clock/clk-max77620.txt b/Documentation/devicetree/bindings/clock/clk-max77620.txt
new file mode 100644
index 0000000..cda6ef7
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/clk-max77620.txt
@@ -0,0 +1,31 @@
+* Maxim MAX77620 32KHz clocks *
+
+Maxim Power Management IC (PMIC) has clock output pins for 32KHz.
+
+This binding uses the common clock binding ./clock-bindings.txt.
+
+Required Properties:
+--------------------
+
+-#clock-cells : shall be set to 0.
+
+Example:
+
+#include <dt-bindings/mfd/max77620.h>
+...
+
+i2c@7000d000 {
+	spmic: max77620@3c {
+		compatible = "maxim,max77620";
+		:::::
+		#clock-cells = <0>;
+		:::
+       };
+};
+
+bluetooth {
+	compatible = "bcom,bluuetooth-device";
+	clocks = <&smic>;
+	clock-names = "in-32k";
+	:::
+};
-- 
2.1.4

[PATCH 2/2] clk: max77620: Add clock driver for MAX77620/MAX20024

[Laxman Dewangan]

MAXIM MAX77620 is the power management IC with multiple DCDC/LDO
regulators, RTC, GPIOs, Watchdog, 32KHz clock source etc.

Add support for controlling the 32KHz clock source via clock
framework.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
---
 drivers/clk/Kconfig        |   9 +++
 drivers/clk/Makefile       |   1 +
 drivers/clk/clk-max77620.c | 143 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 153 insertions(+)
 create mode 100644 drivers/clk/clk-max77620.c

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 98efbfc..149f813 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -34,6 +34,15 @@ source "drivers/clk/versatile/Kconfig"
 config COMMON_CLK_MAX_GEN
         bool
 
+config COMMON_CLK_MAX77620
+	tristate "Clock driver for Maxim 77620/MAX20024 MFD"
+	depends on MFD_MAX77620
+	---help---
+	  This driver supports Maxim MAX77620/MAX20024 32KHz crystal
+	  oscillator. These multi-function devices have one fixed rate.
+	  The clock can be ON and OFF. Say y to make this driver as
+	  built-in and m to make it as module.
+
 config COMMON_CLK_MAX77686
 	tristate "Clock driver for Maxim 77686 MFD"
 	depends on MFD_MAX77686
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index dcc5e69..8c2de43 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_ARCH_CLPS711X)		+= clk-clps711x.o
 obj-$(CONFIG_ARCH_EFM32)		+= clk-efm32gg.o
 obj-$(CONFIG_ARCH_HIGHBANK)		+= clk-highbank.o
 obj-$(CONFIG_MACH_LOONGSON32)		+= clk-ls1x.o
+obj-$(CONFIG_COMMON_CLK_MAX77620)	+= clk-max77620.o
 obj-$(CONFIG_COMMON_CLK_MAX_GEN)	+= clk-max-gen.o
 obj-$(CONFIG_COMMON_CLK_MAX77686)	+= clk-max77686.o
 obj-$(CONFIG_COMMON_CLK_MAX77802)	+= clk-max77802.o
diff --git a/drivers/clk/clk-max77620.c b/drivers/clk/clk-max77620.c
new file mode 100644
index 0000000..615cf2e
--- /dev/null
+++ b/drivers/clk/clk-max77620.c
@@ -0,0 +1,143 @@
+/*
+ * Clock driver for Maxim Max77620 device.
+ *
+ * Copyright (c) 2016, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/mfd/max77620.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+struct max77620_clks_info {
+	struct device *dev;
+	struct regmap *rmap;
+	struct clk *clk;
+	struct clk_hw hw;
+};
+
+static struct max77620_clks_info *to_max77620_clks_info(struct clk_hw *hw)
+{
+	return container_of(hw, struct max77620_clks_info, hw);
+}
+
+static unsigned long max77620_clks_recalc_rate(struct clk_hw *hw,
+					       unsigned long parent_rate)
+{
+	return 32768;
+}
+
+static int max77620_clks_prepare(struct clk_hw *hw)
+{
+	struct max77620_clks_info *mci = to_max77620_clks_info(hw);
+
+	return regmap_update_bits(mci->rmap, MAX77620_REG_CNFG1_32K,
+				  MAX77620_CNFG1_32K_OUT0_EN,
+				  MAX77620_CNFG1_32K_OUT0_EN);
+}
+
+static void max77620_clks_unprepare(struct clk_hw *hw)
+{
+	struct max77620_clks_info *mci = to_max77620_clks_info(hw);
+
+	regmap_update_bits(mci->rmap, MAX77620_REG_CNFG1_32K,
+			   MAX77620_CNFG1_32K_OUT0_EN, 0);
+}
+
+static int max77620_clks_is_prepared(struct clk_hw *hw)
+{
+	struct max77620_clks_info *mci = to_max77620_clks_info(hw);
+	unsigned int rval;
+	int ret;
+
+	ret = regmap_read(mci->rmap, MAX77620_REG_CNFG1_32K, &rval);
+	if (ret < 0)
+		return ret;
+
+	return !!(rval & MAX77620_CNFG1_32K_OUT0_EN);
+}
+
+static struct clk_ops max77620_clks_ops = {
+	.prepare	= max77620_clks_prepare,
+	.unprepare	= max77620_clks_unprepare,
+	.is_prepared	= max77620_clks_is_prepared,
+	.recalc_rate	= max77620_clks_recalc_rate,
+};
+
+struct clk_init_data max77620_clk_init_data = {
+	.name = "clk-32k",
+	.ops = &max77620_clks_ops,
+	.flags = CLK_IGNORE_UNUSED,
+};
+
+static int max77620_clks_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.parent->of_node;
+	struct max77620_clks_info *mci;
+	struct clk *clk;
+	int ret;
+
+	mci = devm_kzalloc(&pdev->dev, sizeof(*mci), GFP_KERNEL);
+	if (!mci)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, mci);
+
+	mci->dev = &pdev->dev;
+	mci->rmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!mci->rmap) {
+		dev_err(mci->dev, "Failed to get parent regmap\n");
+		return -ENODEV;
+	}
+	mci->hw.init = &max77620_clk_init_data;
+
+	clk = devm_clk_register(&pdev->dev, &mci->hw);
+	if (IS_ERR(clk)) {
+		ret = PTR_ERR(clk);
+		dev_err(mci->dev, "Fail to register clock: %d\n", ret);
+		return ret;
+	}
+
+	mci->clk = clk;
+	ret = of_clk_add_provider(np, of_clk_src_simple_get, mci->clk);
+	if (ret < 0)
+		dev_err(&pdev->dev, "Fail to add clock driver, %d\n", ret);
+
+	return ret;
+}
+
+static int max77620_clks_remove(struct platform_device *pdev)
+{
+	of_clk_del_provider(pdev->dev.parent->of_node);
+
+	return 0;
+}
+
+static struct platform_device_id max77620_clks_devtype[] = {
+	{ .name = "max77620-clock", },
+	{},
+};
+
+static struct platform_driver max77620_clks_driver = {
+	.driver = {
+		.name = "max77620-clock",
+	},
+	.probe = max77620_clks_probe,
+	.remove = max77620_clks_remove,
+	.id_table = max77620_clks_devtype,
+};
+
+module_platform_driver(max77620_clks_driver);
+
+MODULE_DESCRIPTION("Clock driver for Maxim max77620 PMIC Device");
+MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
+MODULE_LICENSE("GPL v2");
-- 
2.1.4

Re: [PATCH 2/2] clk: max77620: Add clock driver for MAX77620/MAX20024

[Javier Martinez Canillas]

Hello Laxman,

On Fri, Jun 10, 2016 at 6:12 AM, Laxman Dewangan <ldewangan@nvidia.com> wrote:
> MAXIM MAX77620 is the power management IC with multiple DCDC/LDO(
> regulators, RTC, GPIOs, Watchdog, 32KHz clock source etc.
>
> Add support for controlling the 32KHz clock source via clock
> framework.
>
> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
> ---

It looks very similar to the max77686 and max77802 drivers (with only
the difference in number of clock outputs), can you use the helpers in
drivers/clk/clk-max-gen.c ?

>  drivers/clk/Kconfig        |   9 +++
>  drivers/clk/Makefile       |   1 +
>  drivers/clk/clk-max77620.c | 143 +++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 153 insertions(+)
>  create mode 100644 drivers/clk/clk-max77620.c
>
> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> index 98efbfc..149f813 100644
> --- a/drivers/clk/Kconfig
> +++ b/drivers/clk/Kconfig
> @@ -34,6 +34,15 @@ source "drivers/clk/versatile/Kconfig"
>  config COMMON_CLK_MAX_GEN
>          bool
>
> +config COMMON_CLK_MAX77620
> +       tristate "Clock driver for Maxim 77620/MAX20024 MFD"
> +       depends on MFD_MAX77620
> +       ---help---
> +         This driver supports Maxim MAX77620/MAX20024 32KHz crystal
> +         oscillator. These multi-function devices have one fixed rate.
> +         The clock can be ON and OFF. Say y to make this driver as
> +         built-in and m to make it as module.
> +
>  config COMMON_CLK_MAX77686
>         tristate "Clock driver for Maxim 77686 MFD"
>         depends on MFD_MAX77686
> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> index dcc5e69..8c2de43 100644
> --- a/drivers/clk/Makefile
> +++ b/drivers/clk/Makefile
> @@ -26,6 +26,7 @@ obj-$(CONFIG_ARCH_CLPS711X)           += clk-clps711x.o
>  obj-$(CONFIG_ARCH_EFM32)               += clk-efm32gg.o
>  obj-$(CONFIG_ARCH_HIGHBANK)            += clk-highbank.o
>  obj-$(CONFIG_MACH_LOONGSON32)          += clk-ls1x.o
> +obj-$(CONFIG_COMMON_CLK_MAX77620)      += clk-max77620.o
>  obj-$(CONFIG_COMMON_CLK_MAX_GEN)       += clk-max-gen.o
>  obj-$(CONFIG_COMMON_CLK_MAX77686)      += clk-max77686.o
>  obj-$(CONFIG_COMMON_CLK_MAX77802)      += clk-max77802.o
> diff --git a/drivers/clk/clk-max77620.c b/drivers/clk/clk-max77620.c
> new file mode 100644
> index 0000000..615cf2e
> --- /dev/null
> +++ b/drivers/clk/clk-max77620.c
> @@ -0,0 +1,143 @@
> +/*
> + * Clock driver for Maxim Max77620 device.
> + *
> + * Copyright (c) 2016, NVIDIA CORPORATION.  All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clkdev.h>
> +#include <linux/clk-provider.h>
> +#include <linux/mfd/max77620.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +
> +struct max77620_clks_info {
> +       struct device *dev;
> +       struct regmap *rmap;
> +       struct clk *clk;
> +       struct clk_hw hw;
> +};
> +
> +static struct max77620_clks_info *to_max77620_clks_info(struct clk_hw *hw)
> +{
> +       return container_of(hw, struct max77620_clks_info, hw);
> +}
> +
> +static unsigned long max77620_clks_recalc_rate(struct clk_hw *hw,
> +                                              unsigned long parent_rate)
> +{
> +       return 32768;
> +}
> +
> +static int max77620_clks_prepare(struct clk_hw *hw)
> +{
> +       struct max77620_clks_info *mci = to_max77620_clks_info(hw);
> +
> +       return regmap_update_bits(mci->rmap, MAX77620_REG_CNFG1_32K,
> +                                 MAX77620_CNFG1_32K_OUT0_EN,
> +                                 MAX77620_CNFG1_32K_OUT0_EN);
> +}
> +
> +static void max77620_clks_unprepare(struct clk_hw *hw)
> +{
> +       struct max77620_clks_info *mci = to_max77620_clks_info(hw);
> +
> +       regmap_update_bits(mci->rmap, MAX77620_REG_CNFG1_32K,
> +                          MAX77620_CNFG1_32K_OUT0_EN, 0);
> +}
> +
> +static int max77620_clks_is_prepared(struct clk_hw *hw)
> +{
> +       struct max77620_clks_info *mci = to_max77620_clks_info(hw);
> +       unsigned int rval;
> +       int ret;
> +
> +       ret = regmap_read(mci->rmap, MAX77620_REG_CNFG1_32K, &rval);
> +       if (ret < 0)
> +               return ret;
> +
> +       return !!(rval & MAX77620_CNFG1_32K_OUT0_EN);
> +}
> +
> +static struct clk_ops max77620_clks_ops = {
> +       .prepare        = max77620_clks_prepare,
> +       .unprepare      = max77620_clks_unprepare,
> +       .is_prepared    = max77620_clks_is_prepared,
> +       .recalc_rate    = max77620_clks_recalc_rate,
> +};
> +
> +struct clk_init_data max77620_clk_init_data = {
> +       .name = "clk-32k",
> +       .ops = &max77620_clks_ops,
> +       .flags = CLK_IGNORE_UNUSED,
> +};
> +

Is really needed to ignore this clock if unused? Consumers should
define this clock and enable if needed.

> +static int max77620_clks_probe(struct platform_device *pdev)
> +{
> +       struct device_node *np = pdev->dev.parent->of_node;
> +       struct max77620_clks_info *mci;
> +       struct clk *clk;
> +       int ret;
> +
> +       mci = devm_kzalloc(&pdev->dev, sizeof(*mci), GFP_KERNEL);
> +       if (!mci)
> +               return -ENOMEM;
> +
> +       platform_set_drvdata(pdev, mci);
> +
> +       mci->dev = &pdev->dev;
> +       mci->rmap = dev_get_regmap(pdev->dev.parent, NULL);
> +       if (!mci->rmap) {
> +               dev_err(mci->dev, "Failed to get parent regmap\n");
> +               return -ENODEV;
> +       }
> +       mci->hw.init = &max77620_clk_init_data;
> +
> +       clk = devm_clk_register(&pdev->dev, &mci->hw);
> +       if (IS_ERR(clk)) {
> +               ret = PTR_ERR(clk);
> +               dev_err(mci->dev, "Fail to register clock: %d\n", ret);
> +               return ret;
> +       }
> +
> +       mci->clk = clk;
> +       ret = of_clk_add_provider(np, of_clk_src_simple_get, mci->clk);
> +       if (ret < 0)
> +               dev_err(&pdev->dev, "Fail to add clock driver, %d\n", ret);
> +
> +       return ret;
> +}
> +
> +static int max77620_clks_remove(struct platform_device *pdev)
> +{
> +       of_clk_del_provider(pdev->dev.parent->of_node);
> +
> +       return 0;
> +}
> +
> +static struct platform_device_id max77620_clks_devtype[] = {
> +       { .name = "max77620-clock", },
> +       {},
> +};
> +

Your Kconfig symbol is tristate so the driver can be built as a module
but autoload will not work because the driver is not exporting a
module alias.

IOW, you need MODULE_DEVICE_TABLE(platform, max77620_clks_devtype) here.

> +static struct platform_driver max77620_clks_driver = {
> +       .driver = {
> +               .name = "max77620-clock",
> +       },
> +       .probe = max77620_clks_probe,
> +       .remove = max77620_clks_remove,
> +       .id_table = max77620_clks_devtype,
> +};
> +
> +module_platform_driver(max77620_clks_driver);
> +
> +MODULE_DESCRIPTION("Clock driver for Maxim max77620 PMIC Device");
> +MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
> +MODULE_LICENSE("GPL v2");
> --
> 2.1.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-clk" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 2/2] clk: max77620: Add clock driver for MAX77620/MAX20024

[Laxman Dewangan]

On Friday 10 June 2016 06:50 PM, Javier Martinez Canillas wrote:
> Hello Laxman,
>
> On Fri, Jun 10, 2016 at 6:12 AM, Laxman Dewangan <ldewangan@nvidia.com> wrote:
>> MAXIM MAX77620 is the power management IC with multiple DCDC/LDO(
>> regulators, RTC, GPIOs, Watchdog, 32KHz clock source etc.
>>
>> Add support for controlling the 32KHz clock source via clock
>> framework.
>>
>> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
>> ---
> It looks very similar to the max77686 and max77802 drivers (with only
> the difference in number of clock outputs), can you use the helpers in
> drivers/clk/clk-max-gen.c ?

I have explored that option.

The bit location for clock bit on register are same in case of max77686 
and max77802 but it is different for the max77620.

So until I change it too generic, it will not be possible.
Also if it is require then what about all max77686/max77802 and max77620 
in single file, the way we did for RTC.
We dont need 4 files for the similar driver then.

Re: [PATCH 2/2] clk: max77620: Add clock driver for MAX77620/MAX20024

[Javier Martinez Canillas]

Hello Laxman,

On Fri, Jun 10, 2016 at 9:13 AM, Laxman Dewangan <ldewangan@nvidia.com> wrote:
>
> On Friday 10 June 2016 06:50 PM, Javier Martinez Canillas wrote:
>>
>> Hello Laxman,
>>
>> On Fri, Jun 10, 2016 at 6:12 AM, Laxman Dewangan <ldewangan@nvidia.com>
>> wrote:
>>>
>>> MAXIM MAX77620 is the power management IC with multiple DCDC/LDO(
>>> regulators, RTC, GPIOs, Watchdog, 32KHz clock source etc.
>>>
>>> Add support for controlling the 32KHz clock source via clock
>>> framework.
>>>
>>> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
>>> ---
>>
>> It looks very similar to the max77686 and max77802 drivers (with only
>> the difference in number of clock outputs), can you use the helpers in
>> drivers/clk/clk-max-gen.c ?
>
>
> I have explored that option.
>
> The bit location for clock bit on register are same in case of max77686 and
> max77802 but it is different for the max77620.
>

Ok, I see.

> So until I change it too generic, it will not be possible.
> Also if it is require then what about all max77686/max77802 and max77620 in
> single file, the way we did for RTC.
> We dont need 4 files for the similar driver then.
>

Indeed, probably is better to have a single driver to handle all these
IP variants since they seem to be quite similar.

Best regards,
Javier

Re: [PATCH 2/2] clk: max77620: Add clock driver for MAX77620/MAX20024

[Laxman Dewangan]

+ Krzysztof,

On Friday 10 June 2016 07:02 PM, Javier Martinez Canillas wrote:
> Hello Laxman,
>
> On Fri, Jun 10, 2016 at 9:13 AM, Laxman Dewangan <ldewangan@nvidia.com> wrote:
>> So until I change it too generic, it will not be possible.
>> Also if it is require then what about all max77686/max77802 and max77620 in
>> single file, the way we did for RTC.
>> We dont need 4 files for the similar driver then.
>>
> Indeed, probably is better to have a single driver to handle all these
> IP variants since they seem to be quite similar.
>
>
Yaah, single driver will be very clean approach. But it needs some 
testing on max77802 and max77686 based platform as I do not have any driver.
I will need help on this from you.

Re: [PATCH 2/2] clk: max77620: Add clock driver for MAX77620/MAX20024

[Krzysztof Kozlowski]

On 06/10/2016 03:31 PM, Laxman Dewangan wrote:
> + Krzysztof,
> 
> On Friday 10 June 2016 07:02 PM, Javier Martinez Canillas wrote:
>> Hello Laxman,
>>
>> On Fri, Jun 10, 2016 at 9:13 AM, Laxman Dewangan
>> <ldewangan@nvidia.com> wrote:
>>> So until I change it too generic, it will not be possible.
>>> Also if it is require then what about all max77686/max77802 and
>>> max77620 in
>>> single file, the way we did for RTC.
>>> We dont need 4 files for the similar driver then.
>>>
>> Indeed, probably is better to have a single driver to handle all these
>> IP variants since they seem to be quite similar.
>>
>>
> Yaah, single driver will be very clean approach. But it needs some
> testing on max77802 and max77686 based platform as I do not have any
> driver.
> I will need help on this from you.

No problems, I have both devices at work so I can provide a tested-by.

Best regards,
Krzysztof

Re: [PATCH 1/2] clk: max77620: Add DT binding doc for MAX77620 clock

[Javier Martinez Canillas]

Hello Laxman,

On Fri, Jun 10, 2016 at 6:12 AM, Laxman Dewangan <ldewangan@nvidia.com> wrote:
> MAXIM MAX77620 is the power management IC with multiple DCDC/LDO
> regulators, RTC, GPIOs, Watchdog, 32KHz clock source etc.
>
> Add DT binding doc for the details of the properties for MAX76620
> clocks.
>
> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
> ---
>  .../devicetree/bindings/clock/clk-max77620.txt     | 31 ++++++++++++++++++++++

The DT binding for the clock outputs found in the other Maxim PMICs
(max77686 and max77802) are named maxim,max77{686,802} so I think it
would be better to call this maxim,max7720 for consistency.

>  1 file changed, 31 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/clk-max77620.txt
>
> diff --git a/Documentation/devicetree/bindings/clock/clk-max77620.txt b/Documentation/devicetree/bindings/clock/clk-max77620.txt
> new file mode 100644
> index 0000000..cda6ef7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/clk-max77620.txt
> @@ -0,0 +1,31 @@
> +* Maxim MAX77620 32KHz clocks *
> +
> +Maxim Power Management IC (PMIC) has clock output pins for 32KHz.
> +

I think it would be nice to mention that this should be defined in the
node for the max77620 PMIC and probably have a reference to the MFD
binding. Look how the other max77xxx DT bindings do.

> +This binding uses the common clock binding ./clock-bindings.txt.
> +
> +Required Properties:
> +--------------------
> +
> +-#clock-cells : shall be set to 0.
> +
> +Example:
> +
> +#include <dt-bindings/mfd/max77620.h>
> +...
> +
> +i2c@7000d000 {
> +       spmic: max77620@3c {
> +               compatible = "maxim,max77620";
> +               :::::
> +               #clock-cells = <0>;
> +               :::
> +       };
> +};
> +
> +bluetooth {
> +       compatible = "bcom,bluuetooth-device";
> +       clocks = <&smic>;
> +       clock-names = "in-32k";
> +       :::
> +};
> --

Best regards,
Javier