Re: [PATCH V5 3/5] gpio: gpio-xilinx: Add interrupt support

Re: [PATCH V5 3/5] gpio: gpio-xilinx: Add interrupt support

[Robert Hancock]

Noticed one issue, see below:

On Fri, 2021-01-29 at 19:56 +0530, Srinivas Neeli wrote:
> Adds interrupt support to the Xilinx GPIO driver so that rising and
> falling edge line events can be supported. Since interrupt support is
> an optional feature in the Xilinx IP, the driver continues to support
> devices which have no interrupt provided.
> Depends on OF_GPIO framework for of_xlate function to translate
> gpiospec to the GPIO number and flags.
> 
> Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
> Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
> ---
> Changes in V5:
> -Removed IRQ_DOMAIN_HIERARCHY from Kconfig and
>  #include <linux/of_gpio.h> from includes.
> -Fixed "detected irqchip that is shared with multiple
>  gpiochips: please fix the driver"error message.
> -Added check for #gpio-cells and error message in failure case.
> Changes in V4:
> -Added more commit description.
> Changes in V3:
> -Created separate patch for Clock changes and runtime resume
>  and suspend.
> -Updated minor review comments.
> 
> Changes in V2:
> -Added check for return value of platform_get_irq() API.
> -Updated code to support rising edge and falling edge.
> -Added xgpio_xlate() API to support switch.
> -Added MAINTAINERS fragment.
> ---
>  drivers/gpio/Kconfig       |   2 +
>  drivers/gpio/gpio-xilinx.c | 246
> ++++++++++++++++++++++++++++++++++++++++++++-
>  2 files changed, 244 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index c70f46e80a3b..2ee57797d908 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -690,6 +690,8 @@ config GPIO_XGENE_SB
>  
>  config GPIO_XILINX
>  	tristate "Xilinx GPIO support"
> +	select GPIOLIB_IRQCHIP
> +	depends on OF_GPIO
>  	help
>  	  Say yes here to support the Xilinx FPGA GPIO device
>  
> diff --git a/drivers/gpio/gpio-xilinx.c b/drivers/gpio/gpio-xilinx.c
> index f88db56543c2..62deb755f910 100644
> --- a/drivers/gpio/gpio-xilinx.c
> +++ b/drivers/gpio/gpio-xilinx.c
> @@ -10,7 +10,9 @@
>  #include <linux/errno.h>
>  #include <linux/gpio/driver.h>
>  #include <linux/init.h>
> +#include <linux/interrupt.h>
>  #include <linux/io.h>
> +#include <linux/irq.h>
>  #include <linux/module.h>
>  #include <linux/of_device.h>
>  #include <linux/of_platform.h>
> @@ -22,6 +24,11 @@
>  
>  #define XGPIO_CHANNEL_OFFSET	0x8
>  
> +#define XGPIO_GIER_OFFSET	0x11c /* Global Interrupt Enable */
> +#define XGPIO_GIER_IE		BIT(31)
> +#define XGPIO_IPISR_OFFSET	0x120 /* IP Interrupt Status */
> +#define XGPIO_IPIER_OFFSET	0x128 /* IP Interrupt Enable */
> +
>  /* Read/Write access to the GPIO registers */
>  #if defined(CONFIG_ARCH_ZYNQ) || defined(CONFIG_X86)
>  # define xgpio_readreg(offset)		readl(offset)
> @@ -36,9 +43,15 @@
>   * @gc: GPIO chip
>   * @regs: register block
>   * @gpio_width: GPIO width for every channel
> - * @gpio_state: GPIO state shadow register
> + * @gpio_state: GPIO write state shadow register
> + * @gpio_last_irq_read: GPIO read state register from last interrupt
>   * @gpio_dir: GPIO direction shadow register
>   * @gpio_lock: Lock used for synchronization
> + * @irq: IRQ used by GPIO device
> + * @irqchip: IRQ chip
> + * @irq_enable: GPIO IRQ enable/disable bitfield
> + * @irq_rising_edge: GPIO IRQ rising edge enable/disable bitfield
> + * @irq_falling_edge: GPIO IRQ falling edge enable/disable bitfield
>   * @clk: clock resource for this driver
>   */
>  struct xgpio_instance {
> @@ -46,8 +59,14 @@ struct xgpio_instance {
>  	void __iomem *regs;
>  	unsigned int gpio_width[2];
>  	u32 gpio_state[2];
> +	u32 gpio_last_irq_read[2];
>  	u32 gpio_dir[2];
>  	spinlock_t gpio_lock;	/* For serializing operations */
> +	int irq;
> +	struct irq_chip irqchip;
> +	u32 irq_enable[2];
> +	u32 irq_rising_edge[2];
> +	u32 irq_falling_edge[2];
>  	struct clk *clk;
>  };
>  
> @@ -277,6 +296,175 @@ static int xgpio_remove(struct platform_device *pdev)
>  }
>  
>  /**
> + * xgpio_irq_ack - Acknowledge a child GPIO interrupt.
> + * @irq_data: per IRQ and chip data passed down to chip functions
> + * This currently does nothing, but irq_ack is unconditionally called by
> + * handle_edge_irq and therefore must be defined.
> + */
> +static void xgpio_irq_ack(struct irq_data *irq_data)
> +{
> +}
> +
> +/**
> + * xgpio_irq_mask - Write the specified signal of the GPIO device.
> + * @irq_data: per IRQ and chip data passed down to chip functions
> + */
> +static void xgpio_irq_mask(struct irq_data *irq_data)
> +{
> +	unsigned long flags;
> +	struct xgpio_instance *chip = irq_data_get_irq_chip_data(irq_data);
> +	int irq_offset = irqd_to_hwirq(irq_data);
> +	int index = xgpio_index(chip, irq_offset);
> +	int offset = xgpio_offset(chip, irq_offset);
> +
> +	spin_lock_irqsave(&chip->gpio_lock, flags);
> +
> +	chip->irq_enable[index] &= ~BIT(offset);
> +
> +	if (!chip->irq_enable[index]) {
> +		/* Disable per channel interrupt */
> +		u32 temp = xgpio_readreg(chip->regs + XGPIO_IPIER_OFFSET);
> +
> +		temp &= ~BIT(index);
> +		xgpio_writereg(chip->regs + XGPIO_IPIER_OFFSET, temp);
> +	}
> +	spin_unlock_irqrestore(&chip->gpio_lock, flags);
> +}
> +
> +/**
> + * xgpio_irq_unmask - Write the specified signal of the GPIO device.
> + * @irq_data: per IRQ and chip data passed down to chip functions
> + */
> +static void xgpio_irq_unmask(struct irq_data *irq_data)
> +{
> +	unsigned long flags;
> +	struct xgpio_instance *chip = irq_data_get_irq_chip_data(irq_data);
> +	int irq_offset = irqd_to_hwirq(irq_data);
> +	int index = xgpio_index(chip, irq_offset);
> +	int offset = xgpio_offset(chip, irq_offset);
> +	u32 old_enable = chip->irq_enable[index];
> +
> +	spin_lock_irqsave(&chip->gpio_lock, flags);
> +
> +	chip->irq_enable[index] |= BIT(offset);
> +
> +	if (!old_enable) {
> +		/* Clear any existing per-channel interrupts */
> +		u32 val = xgpio_readreg(chip->regs + XGPIO_IPISR_OFFSET) &
> +			BIT(index);
> +
> +		if (val)
> +			xgpio_writereg(chip->regs + XGPIO_IPISR_OFFSET, val);
> +
> +		/* Update GPIO IRQ read data before enabling interrupt*/
> +		val = xgpio_readreg(chip->regs + XGPIO_DATA_OFFSET +
> +				    index * XGPIO_CHANNEL_OFFSET);
> +		chip->gpio_last_irq_read[index] = val;
> +
> +		/* Enable per channel interrupt */
> +		val = xgpio_readreg(chip->regs + XGPIO_IPIER_OFFSET);
> +		val |= BIT(index);
> +		xgpio_writereg(chip->regs + XGPIO_IPIER_OFFSET, val);
> +	}
> +
> +	spin_unlock_irqrestore(&chip->gpio_lock, flags);
> +}
> +
> +/**
> + * xgpio_set_irq_type - Write the specified signal of the GPIO device.
> + * @irq_data: Per IRQ and chip data passed down to chip functions
> + * @type: Interrupt type that is to be set for the gpio pin
> + *
> + * Return:
> + * 0 if interrupt type is supported otherwise -EINVAL
> + */
> +static int xgpio_set_irq_type(struct irq_data *irq_data, unsigned int type)
> +{
> +	struct xgpio_instance *chip = irq_data_get_irq_chip_data(irq_data);
> +	int irq_offset = irqd_to_hwirq(irq_data);
> +	int index = xgpio_index(chip, irq_offset);
> +	int offset = xgpio_offset(chip, irq_offset);
> +
> +	/*
> +	 * The Xilinx GPIO hardware provides a single interrupt status
> +	 * indication for any state change in a given GPIO channel (bank).
> +	 * Therefore, only rising edge or falling edge triggers are
> +	 * supported.
> +	 */
> +	switch (type & IRQ_TYPE_SENSE_MASK) {
> +	case IRQ_TYPE_EDGE_BOTH:
> +		chip->irq_rising_edge[index] |= BIT(offset);
> +		chip->irq_falling_edge[index] |= BIT(offset);
> +		break;
> +	case IRQ_TYPE_EDGE_RISING:
> +		chip->irq_rising_edge[index] |= BIT(offset);
> +		chip->irq_falling_edge[index] &= ~BIT(offset);
> +		break;
> +	case IRQ_TYPE_EDGE_FALLING:
> +		chip->irq_rising_edge[index] &= ~BIT(offset);
> +		chip->irq_falling_edge[index] |= BIT(offset);
> +		break;
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	irq_set_handler_locked(irq_data, handle_edge_irq);
> +	return 0;
> +}
> +
> +/**
> + * xgpio_irqhandler - Gpio interrupt service routine
> + * @desc: Pointer to interrupt description
> + */
> +static void xgpio_irqhandler(struct irq_desc *desc)
> +{
> +	struct xgpio_instance *chip = irq_desc_get_handler_data(desc);
> +	struct irq_chip *irqchip = irq_desc_get_chip(desc);
> +	u32 num_channels = chip->gpio_width[1] ? 2 : 1;
> +	u32 offset = 0, index;
> +	u32 status = xgpio_readreg(chip->regs + XGPIO_IPISR_OFFSET);
> +
> +	xgpio_writereg(chip->regs + XGPIO_IPISR_OFFSET, status);
> +
> +	chained_irq_enter(irqchip, desc);
> +	for (index = 0; index < num_channels; index++) {
> +		if ((status & BIT(index))) {
> +			unsigned long rising_events, falling_events,
> all_events;
> +			unsigned long flags;
> +			u32 data, bit;
> +			unsigned int irq;
> +
> +			spin_lock_irqsave(&chip->gpio_lock, flags);
> +			data = xgpio_readreg(chip->regs + XGPIO_DATA_OFFSET +
> +					     index * XGPIO_CHANNEL_OFFSET);
> +			rising_events = data &
> +					~chip->gpio_last_irq_read[index] &
> +					chip->irq_enable[index] &
> +					chip->irq_rising_edge[index];
> +			falling_events = ~data &
> +					 chip->gpio_last_irq_read[index] &
> +					 chip->irq_enable[index] &
> +					 chip->irq_falling_edge[index];
> +			dev_dbg(chip->gc.parent,
> +				"IRQ chan %u rising 0x%lx falling 0x%lx\n",
> +				index, rising_events, falling_events);
> +			all_events = rising_events | falling_events;
> +			chip->gpio_last_irq_read[index] = data;
> +			spin_unlock_irqrestore(&chip->gpio_lock, flags);
> +
> +			for_each_set_bit(bit, &all_events, 32) {
> +				irq = irq_find_mapping(chip->gc.irq.domain,
> +						       offset + bit);
> +				generic_handle_irq(irq);
> +			}
> +		}
> +		offset += chip->gpio_width[index];
> +	}
> +
> +	chained_irq_exit(irqchip, desc);
> +}
> +
> +/**
>   * xgpio_of_probe - Probe method for the GPIO device.
>   * @pdev: pointer to the platform device
>   *
> @@ -289,7 +477,10 @@ static int xgpio_probe(struct platform_device *pdev)
>  	struct xgpio_instance *chip;
>  	int status = 0;
>  	struct device_node *np = pdev->dev.of_node;
> -	u32 is_dual;
> +	u32 is_dual = 0;
> +	u32 cells = 2;
> +	struct gpio_irq_chip *girq;
> +	u32 temp;
>  
>  	chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
>  	if (!chip)
> @@ -305,6 +496,15 @@ static int xgpio_probe(struct platform_device *pdev)
>  	if (of_property_read_u32(np, "xlnx,tri-default", &chip->gpio_dir[0]))
>  		chip->gpio_dir[0] = 0xFFFFFFFF;
>  
> +	/* Update cells with gpio-cells value */
> +	if (of_property_read_u32(np, "#gpio-cells", &cells))
> +		dev_dbg(&pdev->dev, "Missing gpio-cells property\n");
> +
> +	if (cells != 2) {
> +		dev_err(&pdev->dev, "#gpio-cells mismatch\n");
> +		return -EINVAL;
> +	}
> +
>  	/*
>  	 * Check device node and parent device node for device width
>  	 * and assume default width of 32
> @@ -343,6 +543,7 @@ static int xgpio_probe(struct platform_device *pdev)
>  	chip->gc.parent = &pdev->dev;
>  	chip->gc.direction_input = xgpio_dir_in;
>  	chip->gc.direction_output = xgpio_dir_out;
> +	chip->gc.of_gpio_n_cells = cells;
>  	chip->gc.get = xgpio_get;
>  	chip->gc.set = xgpio_set;
>  	chip->gc.set_multiple = xgpio_set_multiple;
> @@ -367,14 +568,51 @@ static int xgpio_probe(struct platform_device *pdev)
>  
>  	xgpio_save_regs(chip);
>  
> +	chip->irq = platform_get_irq_optional(pdev, 0);
> +	if (chip->irq <= 0)
> +		goto skip_irq;
> +
> +	chip->irqchip.name = "gpio-xilinx";
> +	chip->irqchip.irq_ack = xgpio_irq_ack;
> +	chip->irqchip.irq_mask = xgpio_irq_mask;
> +	chip->irqchip.irq_unmask = xgpio_irq_unmask;
> +	chip->irqchip.irq_set_type = xgpio_set_irq_type;
> +
> +	/* Disable per-channel interrupts */
> +	xgpio_writereg(chip->regs + XGPIO_IPIER_OFFSET, 0);
> +	/* Clear any existing per-channel interrupts */
> +	temp = xgpio_readreg(chip->regs + XGPIO_IPISR_OFFSET);
> +	xgpio_writereg(chip->regs + XGPIO_IPISR_OFFSET, temp);
> +	/* Enable global interrupts */
> +	xgpio_writereg(chip->regs + XGPIO_GIER_OFFSET, XGPIO_GIER_IE);
> +
> +	girq = &chip->gc.irq;
> +	girq->chip = &chip->irqchip;
> +	girq->parent_handler = xgpio_irqhandler;

I think you want to also set "girq->parent_handler_data = chip;" here. The
original version of this patch did that, but this may have gotten lost when it
was changed to a per-instance irqchip.

It appears that if parent_handler_data is not set, gpiochip_add_irqchip uses
the gpio_chip pointer as the data when calling the parent IRQ handler.
xgpio_irqhandler then converts this pointer to xgpio_instance* when it is
called. Since the gpio_chip is currently the first member of the xgpio_instance
structure, the pointers end up the same and this would currently work. However,
it may be unwise to depend on this, as changing the order of members in
xgpio_instance would unexpectedly break the code.

> +	girq->num_parents = 1;
> +	girq->parents = devm_kcalloc(&pdev->dev, 1,
> +				     sizeof(*girq->parents),
> +				     GFP_KERNEL);
> +	if (!girq->parents) {
> +		status = -ENOMEM;
> +		goto err_unprepare_clk;
> +	}
> +	girq->parents[0] = chip->irq;
> +	girq->default_type = IRQ_TYPE_NONE;
> +	girq->handler = handle_bad_irq;
> +
> +skip_irq:
>  	status = devm_gpiochip_add_data(&pdev->dev, &chip->gc, chip);
>  	if (status) {
>  		dev_err(&pdev->dev, "failed to add GPIO chip\n");
> -		clk_disable_unprepare(chip->clk);
> -		return status;
> +		goto err_unprepare_clk;
>  	}
>  
>  	return 0;
> +
> +err_unprepare_clk:
> +	clk_disable_unprepare(chip->clk);
> +	return status;
>  }
>  
>  static const struct of_device_id xgpio_of_match[] = {
-- 
Robert Hancock
Senior Hardware Designer, Calian Advanced Technologies
www.calian.com

Re: [PATCH V5 5/5] gpio: gpio-xilinx: Add check if width exceeds 32

[William Breathitt Gray]

[-- Attachment #1: Type: text/plain, Size: 1312 bytes --]

On Fri, Jan 29, 2021 at 07:56:50PM +0530, Srinivas Neeli wrote:
> Add check to see if gpio-width property does not exceed 32.
> If it exceeds then return -EINVAL.
> 
> Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>

> ---
> Changes in V5:
> -None
> Changes in V4:
> -New patch.
> ---
>  drivers/gpio/gpio-xilinx.c | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/drivers/gpio/gpio-xilinx.c b/drivers/gpio/gpio-xilinx.c
> index acd574779ca6..b411d3156e0b 100644
> --- a/drivers/gpio/gpio-xilinx.c
> +++ b/drivers/gpio/gpio-xilinx.c
> @@ -589,6 +589,9 @@ static int xgpio_probe(struct platform_device *pdev)
>  	if (of_property_read_u32(np, "xlnx,gpio-width", &chip->gpio_width[0]))
>  		chip->gpio_width[0] = 32;
>  
> +	if (chip->gpio_width[0] > 32)
> +		return -EINVAL;
> +
>  	spin_lock_init(&chip->gpio_lock);
>  
>  	if (of_property_read_u32(np, "xlnx,is-dual", &is_dual))
> @@ -613,6 +616,8 @@ static int xgpio_probe(struct platform_device *pdev)
>  					 &chip->gpio_width[1]))
>  			chip->gpio_width[1] = 32;
>  
> +		if (chip->gpio_width[1] > 32)
> +			return -EINVAL;
>  	}
>  
>  	chip->gc.base = -1;
> -- 
> 2.7.4
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH V5 4/5] gpio: gpio-xilinx: Add support for suspend and resume

[Linus Walleij]

On Fri, Jan 29, 2021 at 3:27 PM Srinivas Neeli
<srinivas.neeli@xilinx.com> wrote:

> Add support for suspend and resume, pm runtime suspend and resume.
> Added free and request calls.
>
> Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
> ---
> Changes in V5:

This v5 version looks really nice!

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

Re: [PATCH V5 3/5] gpio: gpio-xilinx: Add interrupt support

[Linus Walleij]

On Fri, Jan 29, 2021 at 3:27 PM Srinivas Neeli
<srinivas.neeli@xilinx.com> wrote:

> Adds interrupt support to the Xilinx GPIO driver so that rising and
> falling edge line events can be supported. Since interrupt support is
> an optional feature in the Xilinx IP, the driver continues to support
> devices which have no interrupt provided.
> Depends on OF_GPIO framework for of_xlate function to translate
> gpiospec to the GPIO number and flags.
>
> Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
> Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
> ---
> Changes in V5:

This v5 version looks very nice to me!

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

Re: [PATCH V5 0/5] gpio-xilinx: Update on xilinx gpio driver

[Bartosz Golaszewski]

On Fri, Jan 29, 2021 at 3:27 PM Srinivas Neeli
<srinivas.neeli@xilinx.com> wrote:
>
> This patch series does the following:
> -Simplify with dev_err_probe().
> -Reduce spinlock array to array.
> -Add interrupt support
> -Add support for suspend and resume
> -Add check for gpio-width
> ---
> Changes in V5:
> -Removed IRQ_DOMAIN_HIERARCHY from Kconfig and of_gpio.h
>  from includes.
> -Added check for #gpio-cells.
> Changes in V4:
> -Created new patch to simplify code with dev_err_probe().
> -Updated minor review comments.
> -Created new patch to check gpio-width.
> Changes in V3:
> -Created separate patch to arrange headers in sorting order.
> -Updated dt-bindings.
> -Created separate patch for Clock changes and runtime resume.
>  and suspend.
> -Created separate patch for spinlock changes.
> -Created separate patch for remove support.
> -Fixed coverity errors.
> -Updated minor review comments.
>
> Changes in V2:
> -Added check for return value of platform_get_irq() API.
> -Updated code to support rising edge and falling edge.
> -Added xgpio_xlate() API to support switch.
> -Added MAINTAINERS fragment.
>
> Tested Below scenarios:
> -Tested Loop Back.(channel 1.0 connected to channel 2.0)
> -Tested External switch(Used DIP switch)
> -Tested Cascade scenario(Here gpio controller acting as
>  an interrupt controller).
> ---
>
> Srinivas Neeli (5):
>   gpio: gpio-xilinx: Simplify with dev_err_probe()
>   gpio: gpio-xilinx: Reduce spinlock array to array
>   gpio: gpio-xilinx: Add interrupt support
>   gpio: gpio-xilinx: Add support for suspend and resume
>   gpio: gpio-xilinx: Add check if width exceeds 32
>
>  drivers/gpio/Kconfig       |   2 +
>  drivers/gpio/gpio-xilinx.c | 369 ++++++++++++++++++++++++++++++++++++++++++---
>  2 files changed, 349 insertions(+), 22 deletions(-)
>
> --
> 2.7.4
>

Series applied, thanks!

Bartosz