[PATCH v4 0/5] Add Actions Semi S700 pinctrl support

[PATCH v4 0/5] Add Actions Semi S700 pinctrl support

[Saravanan Sekar]

This patchset adds pinctrl support for Actions Semi S700 SoC.
Pinmux functions are only accessible for pin groups while pinconf
parameters are available for both pin groups and individual pins.

pinctrl driver is verified using the Cubieboard7.

common functionalities from s900 is moved for all Actions Semi
SoC's usage.
Common pad control configurations are moved to SoC specific

dts entry for pinctrl depends on clock driver which is still under review:
https://patchwork.kernel.org/patch/10533959/

Thanks,
Saravanan
Parthiban

Changelog in v2
- GPIO Interrupt support is added
- Device tree entry for GPIO and Interrupt configured
- GPIO and pinctrl define reorder, commit message findings fixed

depends on owl GPIO Interrupt support
https://patchwork.kernel.org/patch/10483477/

Chnagelog in v3
- Fixed 0-DAY bisectibility error

Chnagelog in v4
- Fixed 0-DAY sparse warnings on static declaration

Saravanan Sekar (5):
  pinctrl: actions: define constructor generic to Actions Semi SoC's
  pinctrl: actions: define pad control configurtion to SoC specific
  dt-bindings: pinctrl: Add bindings for Actions Semi S700 SoC
  pinctrl: actions: Add Actions Semi S700 pinctrl driver
  arm64: dts: actions: Add pinctrl node for Actions Semi S700

 .../bindings/pinctrl/actions,s700-pinctrl.txt |  170 ++
 arch/arm64/boot/dts/actions/s700.dtsi         |   16 +
 drivers/pinctrl/actions/Kconfig               |    6 +
 drivers/pinctrl/actions/Makefile              |    1 +
 drivers/pinctrl/actions/pinctrl-owl.c         |   71 +-
 drivers/pinctrl/actions/pinctrl-owl.h         |  142 +-
 drivers/pinctrl/actions/pinctrl-s700.c        | 1925 +++++++++++++++++
 drivers/pinctrl/actions/pinctrl-s900.c        |  205 +-
 8 files changed, 2337 insertions(+), 199 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/actions,s700-pinctrl.txt
 create mode 100644 drivers/pinctrl/actions/pinctrl-s700.c

-- 
2.18.0

[PATCH v4 1/5] pinctrl: actions: define constructor generic to Actions Semi SoC's

[Saravanan Sekar]

Move generic defines common to the Owl family out of S900 driver.

Signed-off-by: Parthiban Nallathambi <pn@denx.de>
Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
---
 drivers/pinctrl/actions/pinctrl-owl.h  | 131 +++++++++++++++++++++++
 drivers/pinctrl/actions/pinctrl-s900.c | 139 ++-----------------------
 2 files changed, 137 insertions(+), 133 deletions(-)

diff --git a/drivers/pinctrl/actions/pinctrl-owl.h b/drivers/pinctrl/actions/pinctrl-owl.h
index a724d1d406d4..31cc33d7c4a5 100644
--- a/drivers/pinctrl/actions/pinctrl-owl.h
+++ b/drivers/pinctrl/actions/pinctrl-owl.h
@@ -15,6 +15,136 @@
 #define OWL_PINCONF_SLEW_SLOW 0
 #define OWL_PINCONF_SLEW_FAST 1
 
+#define MUX_PG(group_name, reg, shift, width)				\
+	{								\
+		.name = #group_name,					\
+		.pads = group_name##_pads,				\
+		.npads = ARRAY_SIZE(group_name##_pads),			\
+		.funcs = group_name##_funcs,				\
+		.nfuncs = ARRAY_SIZE(group_name##_funcs),		\
+		.mfpctl_reg  = MFCTL##reg,				\
+		.mfpctl_shift = shift,					\
+		.mfpctl_width = width,					\
+		.drv_reg = -1,						\
+		.drv_shift = -1,					\
+		.drv_width = -1,					\
+		.sr_reg = -1,						\
+		.sr_shift = -1,						\
+		.sr_width = -1,						\
+	}
+
+#define DRV_PG(group_name, reg, shift, width)				\
+	{								\
+		.name = #group_name,					\
+		.pads = group_name##_pads,				\
+		.npads = ARRAY_SIZE(group_name##_pads),			\
+		.mfpctl_reg  = -1,					\
+		.mfpctl_shift = -1,					\
+		.mfpctl_width = -1,					\
+		.drv_reg = PAD_DRV##reg,				\
+		.drv_shift = shift,					\
+		.drv_width = width,					\
+		.sr_reg = -1,						\
+		.sr_shift = -1,						\
+		.sr_width = -1,						\
+	}
+
+#define SR_PG(group_name, reg, shift, width)				\
+	{								\
+		.name = #group_name,					\
+		.pads = group_name##_pads,				\
+		.npads = ARRAY_SIZE(group_name##_pads),			\
+		.mfpctl_reg  = -1,					\
+		.mfpctl_shift = -1,					\
+		.mfpctl_width = -1,					\
+		.drv_reg = -1,						\
+		.drv_shift = -1,					\
+		.drv_width = -1,					\
+		.sr_reg = PAD_SR##reg,					\
+		.sr_shift = shift,					\
+		.sr_width = width,					\
+	}
+
+#define FUNCTION(fname)					\
+	{						\
+		.name = #fname,				\
+		.groups = fname##_groups,		\
+		.ngroups = ARRAY_SIZE(fname##_groups),	\
+	}
+
+/* PAD PULL UP/DOWN CONFIGURES */
+#define PULLCTL_CONF(pull_reg, pull_sft, pull_wdt)	\
+	{						\
+		.reg = PAD_PULLCTL##pull_reg,		\
+		.shift = pull_sft,			\
+		.width = pull_wdt,			\
+	}
+
+#define PAD_PULLCTL_CONF(pad_name, pull_reg, pull_sft, pull_wdt)	\
+	struct owl_pullctl pad_name##_pullctl_conf			\
+		= PULLCTL_CONF(pull_reg, pull_sft, pull_wdt)
+
+#define ST_CONF(st_reg, st_sft, st_wdt)			\
+	{						\
+		.reg = PAD_ST##st_reg,			\
+		.shift = st_sft,			\
+		.width = st_wdt,			\
+	}
+
+#define PAD_ST_CONF(pad_name, st_reg, st_sft, st_wdt)	\
+	struct owl_st pad_name##_st_conf		\
+		= ST_CONF(st_reg, st_sft, st_wdt)
+
+#define PAD_INFO(name)					\
+	{						\
+		.pad = name,				\
+		.pullctl = NULL,			\
+		.st = NULL,				\
+	}
+
+#define PAD_INFO_ST(name)				\
+	{						\
+		.pad = name,				\
+		.pullctl = NULL,			\
+		.st = &name##_st_conf,			\
+	}
+
+#define PAD_INFO_PULLCTL(name)				\
+	{						\
+		.pad = name,				\
+		.pullctl = &name##_pullctl_conf,	\
+		.st = NULL,				\
+	}
+
+#define PAD_INFO_PULLCTL_ST(name)			\
+	{						\
+		.pad = name,				\
+		.pullctl = &name##_pullctl_conf,	\
+		.st = &name##_st_conf,			\
+	}
+
+#define OWL_GPIO_PORT_A		0
+#define OWL_GPIO_PORT_B		1
+#define OWL_GPIO_PORT_C		2
+#define OWL_GPIO_PORT_D		3
+#define OWL_GPIO_PORT_E		4
+#define OWL_GPIO_PORT_F		5
+
+#define OWL_GPIO_PORT(port, base, count, _outen, _inen, _dat, _intc_ctl,\
+			_intc_pd, _intc_msk, _intc_type, _share)	\
+	[OWL_GPIO_PORT_##port] = {				\
+		.offset = base,					\
+		.pins = count,					\
+		.outen = _outen,				\
+		.inen = _inen,					\
+		.dat = _dat,					\
+		.intc_ctl = _intc_ctl,				\
+		.intc_pd = _intc_pd,				\
+		.intc_msk = _intc_msk,				\
+		.intc_type = _intc_type,			\
+		.shared_ctl_offset = _share,			\
+	}
+
 enum owl_pinconf_pull {
 	OWL_PINCONF_PULL_HIZ,
 	OWL_PINCONF_PULL_DOWN,
@@ -148,6 +278,7 @@ struct owl_gpio_port {
 	unsigned int intc_pd;
 	unsigned int intc_msk;
 	unsigned int intc_type;
+	u8 shared_ctl_offset;
 };
 
 /**
diff --git a/drivers/pinctrl/actions/pinctrl-s900.c b/drivers/pinctrl/actions/pinctrl-s900.c
index ea67b14ef93b..0597009d8369 100644
--- a/drivers/pinctrl/actions/pinctrl-s900.c
+++ b/drivers/pinctrl/actions/pinctrl-s900.c
@@ -33,13 +33,6 @@
 #define PAD_SR1			(0x0274)
 #define PAD_SR2			(0x0278)
 
-#define OWL_GPIO_PORT_A		0
-#define OWL_GPIO_PORT_B		1
-#define OWL_GPIO_PORT_C		2
-#define OWL_GPIO_PORT_D		3
-#define OWL_GPIO_PORT_E		4
-#define OWL_GPIO_PORT_F		5
-
 #define _GPIOA(offset)		(offset)
 #define _GPIOB(offset)		(32 + (offset))
 #define _GPIOC(offset)		(64 + (offset))
@@ -892,55 +885,6 @@ static unsigned int i2c2_sr_pads[]		= { I2C2_SCLK, I2C2_SDATA };
 static unsigned int sensor0_sr_pads[]		= { SENSOR0_PCLK,
 						    SENSOR0_CKOUT };
 
-#define MUX_PG(group_name, reg, shift, width)				\
-	{								\
-		.name = #group_name,					\
-		.pads = group_name##_pads,				\
-		.npads = ARRAY_SIZE(group_name##_pads),			\
-		.funcs = group_name##_funcs,				\
-		.nfuncs = ARRAY_SIZE(group_name##_funcs),		\
-		.mfpctl_reg  = MFCTL##reg,				\
-		.mfpctl_shift = shift,					\
-		.mfpctl_width = width,					\
-		.drv_reg = -1,						\
-		.drv_shift = -1,					\
-		.drv_width = -1,					\
-		.sr_reg = -1,						\
-		.sr_shift = -1,						\
-		.sr_width = -1,						\
-	}
-
-#define DRV_PG(group_name, reg, shift, width)				\
-	{								\
-		.name = #group_name,					\
-		.pads = group_name##_pads,				\
-		.npads = ARRAY_SIZE(group_name##_pads),			\
-		.mfpctl_reg  = -1,					\
-		.mfpctl_shift = -1,					\
-		.mfpctl_width = -1,					\
-		.drv_reg = PAD_DRV##reg,				\
-		.drv_shift = shift,					\
-		.drv_width = width,					\
-		.sr_reg = -1,						\
-		.sr_shift = -1,						\
-		.sr_width = -1,						\
-	}
-
-#define SR_PG(group_name, reg, shift, width)				\
-	{								\
-		.name = #group_name,					\
-		.pads = group_name##_pads,				\
-		.npads = ARRAY_SIZE(group_name##_pads),			\
-		.mfpctl_reg  = -1,					\
-		.mfpctl_shift = -1,					\
-		.mfpctl_width = -1,					\
-		.drv_reg = -1,						\
-		.drv_shift = -1,					\
-		.drv_width = -1,					\
-		.sr_reg = PAD_SR##reg,					\
-		.sr_shift = shift,					\
-		.sr_width = width,					\
-	}
 
 /* Pinctrl groups */
 static const struct owl_pingroup s900_groups[] = {
@@ -1442,13 +1386,6 @@ static const char * const sirq2_groups[] = {
 	"sirq2_dummy",
 };
 
-#define FUNCTION(fname)					\
-	{						\
-		.name = #fname,				\
-		.groups = fname##_groups,		\
-		.ngroups = ARRAY_SIZE(fname##_groups),	\
-	}
-
 static const struct owl_pinmux_func s900_functions[] = {
 	[S900_MUX_ERAM] = FUNCTION(eram),
 	[S900_MUX_ETH_RMII] = FUNCTION(eth_rmii),
@@ -1500,28 +1437,6 @@ static const struct owl_pinmux_func s900_functions[] = {
 	[S900_MUX_SIRQ1] = FUNCTION(sirq1),
 	[S900_MUX_SIRQ2] = FUNCTION(sirq2)
 };
-/* PAD PULL UP/DOWN CONFIGURES */
-#define PULLCTL_CONF(pull_reg, pull_sft, pull_wdt)			\
-	{								\
-		.reg = PAD_PULLCTL##pull_reg,				\
-		.shift = pull_sft,					\
-		.width = pull_wdt,					\
-	}
-
-#define PAD_PULLCTL_CONF(pad_name, pull_reg, pull_sft, pull_wdt)	\
-	struct owl_pullctl pad_name##_pullctl_conf			\
-		= PULLCTL_CONF(pull_reg, pull_sft, pull_wdt)
-
-#define ST_CONF(st_reg, st_sft, st_wdt)					\
-	{								\
-		.reg = PAD_ST##st_reg,					\
-		.shift = st_sft,					\
-		.width = st_wdt,					\
-	}
-
-#define PAD_ST_CONF(pad_name, st_reg, st_sft, st_wdt)			\
-	struct owl_st pad_name##_st_conf				\
-		= ST_CONF(st_reg, st_sft, st_wdt)
 
 /* PAD_PULLCTL0 */
 static PAD_PULLCTL_CONF(ETH_RXER, 0, 18, 2);
@@ -1639,34 +1554,6 @@ static PAD_ST_CONF(SPI0_SS, 1, 2, 1);
 static PAD_ST_CONF(I2S_BCLK0, 1, 1, 1);
 static PAD_ST_CONF(I2S_MCLK0, 1, 0, 1);
 
-#define PAD_INFO(name)							\
-	{								\
-		.pad = name,						\
-		.pullctl = NULL,					\
-		.st = NULL,						\
-	}
-
-#define PAD_INFO_ST(name)						\
-	{								\
-		.pad = name,						\
-		.pullctl = NULL,					\
-		.st = &name##_st_conf,					\
-	}
-
-#define PAD_INFO_PULLCTL(name)						\
-	{								\
-		.pad = name,						\
-		.pullctl = &name##_pullctl_conf,			\
-		.st = NULL,						\
-	}
-
-#define PAD_INFO_PULLCTL_ST(name)					\
-	{								\
-		.pad = name,						\
-		.pullctl = &name##_pullctl_conf,			\
-		.st = &name##_st_conf,					\
-	}
-
 /* Pad info table */
 static struct owl_padinfo s900_padinfo[NUM_PADS] = {
 	[ETH_TXD0] = PAD_INFO_ST(ETH_TXD0),
@@ -1821,27 +1708,13 @@ static struct owl_padinfo s900_padinfo[NUM_PADS] = {
 	[SGPIO3] = PAD_INFO_PULLCTL_ST(SGPIO3)
 };
 
-#define OWL_GPIO_PORT(port, base, count, _outen, _inen, _dat,		\
-			_intc_ctl, _intc_pd, _intc_msk, _intc_type)	\
-	[OWL_GPIO_PORT_##port] = {					\
-		.offset = base,						\
-		.pins = count,						\
-		.outen = _outen,					\
-		.inen = _inen,						\
-		.dat = _dat,						\
-		.intc_ctl = _intc_ctl,					\
-		.intc_pd = _intc_pd,					\
-		.intc_msk = _intc_msk,					\
-		.intc_type = _intc_type,				\
-	}
-
 static const struct owl_gpio_port s900_gpio_ports[] = {
-	OWL_GPIO_PORT(A, 0x0000, 32, 0x0, 0x4, 0x8, 0x204, 0x208, 0x20C, 0x240),
-	OWL_GPIO_PORT(B, 0x000C, 32, 0x0, 0x4, 0x8, 0x534, 0x204, 0x208, 0x23C),
-	OWL_GPIO_PORT(C, 0x0018, 12, 0x0, 0x4, 0x8, 0x52C, 0x200, 0x204, 0x238),
-	OWL_GPIO_PORT(D, 0x0024, 30, 0x0, 0x4, 0x8, 0x524, 0x1FC, 0x200, 0x234),
-	OWL_GPIO_PORT(E, 0x0030, 32, 0x0, 0x4, 0x8, 0x51C, 0x1F8, 0x1FC, 0x230),
-	OWL_GPIO_PORT(F, 0x00F0, 8, 0x0, 0x4, 0x8, 0x460, 0x140, 0x144, 0x178)
+	OWL_GPIO_PORT(A, 0x0000, 32, 0x0, 0x4, 0x8, 0x204, 0x208, 0x20C, 0x240, 0),
+	OWL_GPIO_PORT(B, 0x000C, 32, 0x0, 0x4, 0x8, 0x534, 0x204, 0x208, 0x23C, 0),
+	OWL_GPIO_PORT(C, 0x0018, 12, 0x0, 0x4, 0x8, 0x52C, 0x200, 0x204, 0x238, 0),
+	OWL_GPIO_PORT(D, 0x0024, 30, 0x0, 0x4, 0x8, 0x524, 0x1FC, 0x200, 0x234, 0),
+	OWL_GPIO_PORT(E, 0x0030, 32, 0x0, 0x4, 0x8, 0x51C, 0x1F8, 0x1FC, 0x230, 0),
+	OWL_GPIO_PORT(F, 0x00F0, 8, 0x0, 0x4, 0x8, 0x460, 0x140, 0x144, 0x178, 0)
 };
 
 static struct owl_pinctrl_soc_data s900_pinctrl_data = {
-- 
2.18.0

[PATCH v4 2/5] pinctrl: actions: define pad control configurtion to SoC specific

[Saravanan Sekar]

pad control for s900 and s700 are differs in number of
pull control configuraions
s900 has 4 pull controls - high impedence, pull up, pull down, repeater
s700, s500 has 2 pull controls - pull up and pull down

so pad control configuration has to SoC specific, moved out from pinctrl
common to s700, s900 specific.

Signed-off-by: Parthiban Nallathambi <pn@denx.de>
Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
---
 drivers/pinctrl/actions/pinctrl-owl.c  | 64 ++++---------------------
 drivers/pinctrl/actions/pinctrl-owl.h  | 13 +++--
 drivers/pinctrl/actions/pinctrl-s900.c | 66 +++++++++++++++++++++++++-
 3 files changed, 79 insertions(+), 64 deletions(-)

diff --git a/drivers/pinctrl/actions/pinctrl-owl.c b/drivers/pinctrl/actions/pinctrl-owl.c
index 4fa9cc377b3b..004bdc66e158 100644
--- a/drivers/pinctrl/actions/pinctrl-owl.c
+++ b/drivers/pinctrl/actions/pinctrl-owl.c
@@ -246,60 +246,6 @@ static int owl_pad_pinconf_reg(const struct owl_padinfo *info,
 	return 0;
 }
 
-static int owl_pad_pinconf_arg2val(const struct owl_padinfo *info,
-				unsigned int param,
-				u32 *arg)
-{
-	switch (param) {
-	case PIN_CONFIG_BIAS_BUS_HOLD:
-		*arg = OWL_PINCONF_PULL_HOLD;
-		break;
-	case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
-		*arg = OWL_PINCONF_PULL_HIZ;
-		break;
-	case PIN_CONFIG_BIAS_PULL_DOWN:
-		*arg = OWL_PINCONF_PULL_DOWN;
-		break;
-	case PIN_CONFIG_BIAS_PULL_UP:
-		*arg = OWL_PINCONF_PULL_UP;
-		break;
-	case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
-		*arg = (*arg >= 1 ? 1 : 0);
-		break;
-	default:
-		return -ENOTSUPP;
-	}
-
-	return 0;
-}
-
-static int owl_pad_pinconf_val2arg(const struct owl_padinfo *padinfo,
-				unsigned int param,
-				u32 *arg)
-{
-	switch (param) {
-	case PIN_CONFIG_BIAS_BUS_HOLD:
-		*arg = *arg == OWL_PINCONF_PULL_HOLD;
-		break;
-	case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
-		*arg = *arg == OWL_PINCONF_PULL_HIZ;
-		break;
-	case PIN_CONFIG_BIAS_PULL_DOWN:
-		*arg = *arg == OWL_PINCONF_PULL_DOWN;
-		break;
-	case PIN_CONFIG_BIAS_PULL_UP:
-		*arg = *arg == OWL_PINCONF_PULL_UP;
-		break;
-	case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
-		*arg = *arg == 1;
-		break;
-	default:
-		return -ENOTSUPP;
-	}
-
-	return 0;
-}
-
 static int owl_pin_config_get(struct pinctrl_dev *pctrldev,
 				unsigned int pin,
 				unsigned long *config)
@@ -318,7 +264,10 @@ static int owl_pin_config_get(struct pinctrl_dev *pctrldev,
 
 	arg = owl_read_field(pctrl, reg, bit, width);
 
-	ret = owl_pad_pinconf_val2arg(info, param, &arg);
+	if (!pctrl->soc->padctl_val2arg)
+		return -ENOTSUPP;
+
+	ret = pctrl->soc->padctl_val2arg(info, param, &arg);
 	if (ret)
 		return ret;
 
@@ -349,7 +298,10 @@ static int owl_pin_config_set(struct pinctrl_dev *pctrldev,
 		if (ret)
 			return ret;
 
-		ret = owl_pad_pinconf_arg2val(info, param, &arg);
+		if (!pctrl->soc->padctl_arg2val)
+			return -ENOTSUPP;
+
+		ret = pctrl->soc->padctl_arg2val(info, param, &arg);
 		if (ret)
 			return ret;
 
diff --git a/drivers/pinctrl/actions/pinctrl-owl.h b/drivers/pinctrl/actions/pinctrl-owl.h
index 31cc33d7c4a5..dae2e8363fd5 100644
--- a/drivers/pinctrl/actions/pinctrl-owl.h
+++ b/drivers/pinctrl/actions/pinctrl-owl.h
@@ -145,13 +145,6 @@
 		.shared_ctl_offset = _share,			\
 	}
 
-enum owl_pinconf_pull {
-	OWL_PINCONF_PULL_HIZ,
-	OWL_PINCONF_PULL_DOWN,
-	OWL_PINCONF_PULL_UP,
-	OWL_PINCONF_PULL_HOLD,
-};
-
 enum owl_pinconf_drv {
 	OWL_PINCONF_DRV_2MA,
 	OWL_PINCONF_DRV_4MA,
@@ -305,6 +298,12 @@ struct owl_pinctrl_soc_data {
 	unsigned int ngpios;
 	const struct owl_gpio_port *ports;
 	unsigned int nports;
+	int (*padctl_val2arg)(const struct owl_padinfo *padinfo,
+				unsigned int param,
+				u32 *arg);
+	int (*padctl_arg2val)(const struct owl_padinfo *info,
+				unsigned int param,
+				u32 *arg);
 };
 
 int owl_pinctrl_probe(struct platform_device *pdev,
diff --git a/drivers/pinctrl/actions/pinctrl-s900.c b/drivers/pinctrl/actions/pinctrl-s900.c
index 0597009d8369..2e19fecbe5e9 100644
--- a/drivers/pinctrl/actions/pinctrl-s900.c
+++ b/drivers/pinctrl/actions/pinctrl-s900.c
@@ -13,6 +13,7 @@
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinconf-generic.h>
 #include "pinctrl-owl.h"
 
 /* Pinctrl registers offset */
@@ -1717,6 +1718,67 @@ static const struct owl_gpio_port s900_gpio_ports[] = {
 	OWL_GPIO_PORT(F, 0x00F0, 8, 0x0, 0x4, 0x8, 0x460, 0x140, 0x144, 0x178, 0)
 };
 
+enum owl_pinconf_pull {
+	OWL_PINCONF_PULL_HIZ,
+	OWL_PINCONF_PULL_DOWN,
+	OWL_PINCONF_PULL_UP,
+	OWL_PINCONF_PULL_HOLD,
+};
+
+static int s900_pad_pinconf_arg2val(const struct owl_padinfo *info,
+				unsigned int param,
+				u32 *arg)
+{
+	switch (param) {
+	case PIN_CONFIG_BIAS_BUS_HOLD:
+		*arg = OWL_PINCONF_PULL_HOLD;
+		break;
+	case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
+		*arg = OWL_PINCONF_PULL_HIZ;
+		break;
+	case PIN_CONFIG_BIAS_PULL_DOWN:
+		*arg = OWL_PINCONF_PULL_DOWN;
+		break;
+	case PIN_CONFIG_BIAS_PULL_UP:
+		*arg = OWL_PINCONF_PULL_UP;
+		break;
+	case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
+		*arg = (*arg >= 1 ? 1 : 0);
+		break;
+	default:
+		return -ENOTSUPP;
+	}
+
+	return 0;
+}
+
+static int s900_pad_pinconf_val2arg(const struct owl_padinfo *padinfo,
+				unsigned int param,
+				u32 *arg)
+{
+	switch (param) {
+	case PIN_CONFIG_BIAS_BUS_HOLD:
+		*arg = *arg == OWL_PINCONF_PULL_HOLD;
+		break;
+	case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
+		*arg = *arg == OWL_PINCONF_PULL_HIZ;
+		break;
+	case PIN_CONFIG_BIAS_PULL_DOWN:
+		*arg = *arg == OWL_PINCONF_PULL_DOWN;
+		break;
+	case PIN_CONFIG_BIAS_PULL_UP:
+		*arg = *arg == OWL_PINCONF_PULL_UP;
+		break;
+	case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
+		*arg = *arg == 1;
+		break;
+	default:
+		return -ENOTSUPP;
+	}
+
+	return 0;
+}
+
 static struct owl_pinctrl_soc_data s900_pinctrl_data = {
 	.padinfo = s900_padinfo,
 	.pins = (const struct pinctrl_pin_desc *)s900_pads,
@@ -1727,7 +1789,9 @@ static struct owl_pinctrl_soc_data s900_pinctrl_data = {
 	.ngroups = ARRAY_SIZE(s900_groups),
 	.ngpios = NUM_GPIOS,
 	.ports = s900_gpio_ports,
-	.nports = ARRAY_SIZE(s900_gpio_ports)
+	.nports = ARRAY_SIZE(s900_gpio_ports),
+	.padctl_arg2val = s900_pad_pinconf_arg2val,
+	.padctl_val2arg = s900_pad_pinconf_val2arg,
 };
 
 static int s900_pinctrl_probe(struct platform_device *pdev)
-- 
2.18.0

[PATCH v4 3/5] dt-bindings: pinctrl: Add bindings for Actions Semi S700 SoC

[Saravanan Sekar]

Add pinctrl and pio bindings for Actions Semi S700 SoC.

Signed-off-by: Parthiban Nallathambi <pn@denx.de>
Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/pinctrl/actions,s700-pinctrl.txt | 170 ++++++++++++++++++
 1 file changed, 170 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/actions,s700-pinctrl.txt

diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s700-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/actions,s700-pinctrl.txt
new file mode 100644
index 000000000000..ceed32e836b1
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/actions,s700-pinctrl.txt
@@ -0,0 +1,170 @@
+Actions Semi S700 Pin Controller
+
+This binding describes the pin controller found in the S700 SoC.
+
+Required Properties:
+
+- compatible:   Should be "actions,s700-pinctrl"
+- reg:          Should contain the register base address and size of
+		the pin controller.
+- clocks:       phandle of the clock feeding the pin controller
+- gpio-controller: Marks the device node as a GPIO controller.
+- gpio-ranges: Specifies the mapping between gpio controller and
+               pin-controller pins.
+- #gpio-cells: Should be two. The first cell is the gpio pin number
+		and the second cell is used for optional parameters.
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells: Specifies the number of cells needed to encode an
+		interrupt.  Shall be set to 2.  The first cell
+		defines the interrupt number, the second encodes
+		the trigger flags described in
+		bindings/interrupt-controller/interrupts.txt
+- interrupts: The interrupt outputs from the controller. There is one GPIO
+              interrupt per GPIO bank. The number of interrupts listed depends
+              on the number of GPIO banks on the SoC. The interrupts must be
+              ordered by bank, starting with bank 0.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+The pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those group(s), and various pin configuration
+parameters, such as pull-up, drive strength, etc.
+
+PIN CONFIGURATION NODES:
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+Pinmux functions are available only for the pin groups while pinconf
+parameters are available for both pin groups and individual pins.
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pin configuration subnode:
+
+Required Properties:
+
+- pins:		An array of strings, each string containing the name of a pin.
+		These pins are used for selecting the pull control and schmitt
+		trigger parameters. The following are the list of pins
+		available:
+
+		eth_txd0, eth_txd1, eth_txd2, eth_txd3, eth_txen, eth_rxer,
+		eth_crs_dv, eth_rxd1, eth_rxd0, eth_rxd2, eth_rxd3, eth_ref_clk,
+		eth_mdc, eth_mdio, sirq0, sirq1, sirq2, i2s_d0, i2s_bclk0,
+		i2s_lrclk0, i2s_mclk0, i2s_d1, i2s_bclk1, i2s_lrclk1, i2s_mclk1,
+		pcm1_in, pcm1_clk, pcm1_sync, pcm1_out, ks_in0, ks_in1, ks_in2,
+		ks_in3, ks_out0, ks_out1, ks_out2, lvds_oep, lvds_oen, lvds_odp,
+		lvds_odn, lvds_ocp, lvds_ocn, lvds_obp, lvds_obn, lvds_oap,
+		lvds_oan, lvds_eep, lvds_een, lvds_edp, lvds_edn, lvds_ecp,
+		lvds_ecn, lvds_ebp, lvds_ebn, lvds_eap, lvds_ean, lcd0_d18,
+		lcd0_d2, dsi_dp3, dsi_dn3, dsi_dp1, dsi_dn1, dsi_cp, dsi_cn,
+		dsi_dp0, dsi_dn0, dsi_dp2, dsi_dn2, sd0_d0, sd0_d1, sd0_d2,
+		sd0_d3, sd1_d0, sd1_d1, sd1_d2, sd1_d3, sd0_cmd, sd0_clk,
+		sd1_cmd, sd1_clk, spi0_ss, spi0_miso, uart0_rx, uart0_tx,
+		uart2_rx, uart2_tx, uart2_rtsb, uart2_ctsb, uart3_rx, uart3_tx,
+		uart3_rtsb, uart3_ctsb, i2c0_sclk, i2c0_sdata, i2c1_sclk,
+		i2c1_sdata, i2c2_sdata, csi_dn0, csi_dp0, csi_dn1, csi_dp1,
+		csi_cn, csi_cp, csi_dn2, csi_dp2, csi_dn3, csi_dp3,
+		sensor0_pclk, sensor0_ckout, dnand_d0, dnand_d1, dnand_d2,
+		dnand_d3, dnand_d4, dnand_d5, dnand_d6, dnand_d7, dnand_wrb,
+		dnand_rdb, dnand_rdbn, dnand_dqs, dnand_dqsn, dnand_rb0,
+		dnand_ale, dnand_cle, dnand_ceb0, dnand_ceb1, dnand_ceb2,
+		dnand_ceb3, porb, clko_25m, bsel, pkg0, pkg1, pkg2, pkg3
+
+- groups:       An array of strings, each string containing the name of a pin
+                group. These pin groups are used for selecting the pinmux
+                functions.
+		rgmii_txd23_mfp, rgmii_rxd2_mfp, rgmii_rxd3_mfp, lcd0_d18_mfp,
+		rgmii_txd01_mfp, rgmii_txd0_mfp, rgmii_txd1_mfp, rgmii_txen_mfp,
+		rgmii_rxen_mfp, rgmii_rxd1_mfp, rgmii_rxd0_mfp, rgmii_ref_clk_mfp,
+		i2s_d0_mfp, i2s_pcm1_mfp, i2s0_pcm0_mfp, i2s1_pcm0_mfp,
+		i2s_d1_mfp, ks_in2_mfp, ks_in1_mfp, ks_in0_mfp, ks_in3_mfp,
+		ks_out0_mfp, ks_out1_mfp, ks_out2_mfp, lvds_o_pn_mfp, dsi_dn0_mfp,
+		dsi_dp2_mfp, lcd0_d2_mfp, dsi_dp3_mfp, dsi_dn3_mfp, dsi_dp0_mfp,
+		lvds_ee_pn_mfp, uart2_rx_tx_mfp, spi0_i2c_pcm_mfp, dsi_dnp1_cp_d2_mfp,
+		dsi_dnp1_cp_d17_mfp, lvds_e_pn_mfp, dsi_dn2_mfp, uart2_rtsb_mfp,
+		uart2_ctsb_mfp, uart3_rtsb_mfp, uart3_ctsb_mfp, sd0_d0_mfp, sd0_d1_mfp,
+		sd0_d2_d3_mfp, sd1_d0_d3_mfp, sd0_cmd_mfp, sd0_clk_mfp, sd1_cmd_mfp,
+		uart0_rx_mfp, clko_25m_mfp, csi_cn_cp_mfp, sens0_ckout_mfp, uart0_tx_mfp,
+		i2c0_mfp, csi_dn_dp_mfp, sen0_pclk_mfp, pcm1_in_mfp, pcm1_clk_mfp,
+		pcm1_sync_mfp, pcm1_out_mfp, dnand_data_wr_mfp, dnand_acle_ce0_mfp,
+		nand_ceb2_mfp, nand_ceb3_mfp
+
+		These pin groups are used for selecting the drive strength
+		parameters.
+
+		sirq_drv, rgmii_txd23_drv, rgmii_rxd23_drv, rgmii_txd01_txen_drv,
+		rgmii_rxer_drv, rgmii_crs_drv, rgmii_rxd10_drv, rgmii_ref_clk_drv,
+		smi_mdc_mdio_drv, i2s_d0_drv, i2s_bclk0_drv, i2s3_drv, i2s13_drv,
+		pcm1_drv, ks_in_drv, ks_out_drv, lvds_all_drv, lcd_d18_d2_drv,
+		dsi_all_drv, sd0_d0_d3_drv, sd0_cmd_drv, sd0_clk_drv, spi0_all_drv,
+		uart0_rx_drv, uart0_tx_drv, uart2_all_drv, i2c0_all_drv, i2c12_all_drv,
+		sens0_pclk_drv, sens0_ckout_drv, uart3_all_drv
+
+- function:	An array of strings, each string containing the name of the
+		pinmux functions. These functions can only be selected by
+		the corresponding pin groups. The following are the list of
+		pinmux functions available:
+
+		nor, eth_rgmii, eth_sgmii, spi0, spi1, spi2, spi3, seNs0, sens1,
+		uart0, uart1, uart2, uart3, uart4, uart5, uart6, i2s0, i2s1,
+		pcm1, pcm0, ks, jtag, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5, p0,
+		sd0, sd1, sd2, i2c0, i2c1, i2c2, i2c3, dsi, lvds, usb30,
+		clko_25m, mipi_csi, nand, spdif, sirq0, sirq1, sirq2, bt, lcd0
+
+Optional Properties:
+
+- bias-pull-down: No arguments. The specified pins should be configured as
+		pull down.
+- bias-pull-up:   No arguments. The specified pins should be configured as
+		pull up.
+- input-schmitt-enable: No arguments: Enable schmitt trigger for the specified
+		pins
+- input-schmitt-disable: No arguments: Disable schmitt trigger for the specified
+		pins
+- drive-strength: Integer. Selects the drive strength for the specified
+		pins in mA.
+		Valid values are:
+		<2>
+		<4>
+		<8>
+		<12>
+
+Example:
+
+	pinctrl: pinctrl@e01b0000 {
+		compatible = "actions,s700-pinctrl";
+		reg = <0x0 0xe01b0000 0x0 0x1000>;
+		clocks = <&cmu CLK_GPIO>;
+		gpio-controller;
+		gpio-ranges = <&pinctrl 0 0 136>;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+                interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+                             <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+                             <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+                             <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+                             <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>
+
+		uart3-default: uart3-default {
+			pinmux {
+				groups = "uart3_rtsb_mfp", "uart3_ctsb_mfp";
+				function = "uart3";
+			};
+			pinconf {
+				groups = "uart3_all_drv";
+				drive-strength = <2>;
+			};
+		};
+	};
-- 
2.18.0

[PATCH v4 4/5] pinctrl: actions: Add Actions Semi S700 pinctrl driver

[Saravanan Sekar]

Add pinctrl driver for Actions Semi S700 SoC. The driver supports pinctrl,
pinmux and pinconf functionalities through a range of registers common to
both gpio driver and pinctrl driver.

Signed-off-by: Parthiban Nallathambi <pn@denx.de>
Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
---
 drivers/pinctrl/actions/Kconfig        |    6 +
 drivers/pinctrl/actions/Makefile       |    1 +
 drivers/pinctrl/actions/pinctrl-owl.c  |    7 +-
 drivers/pinctrl/actions/pinctrl-s700.c | 1925 ++++++++++++++++++++++++
 4 files changed, 1936 insertions(+), 3 deletions(-)
 create mode 100644 drivers/pinctrl/actions/pinctrl-s700.c

diff --git a/drivers/pinctrl/actions/Kconfig b/drivers/pinctrl/actions/Kconfig
index 2397cb0f6011..c7ed1d481802 100644
--- a/drivers/pinctrl/actions/Kconfig
+++ b/drivers/pinctrl/actions/Kconfig
@@ -9,6 +9,12 @@ config PINCTRL_OWL
 	help
 	  Say Y here to enable Actions Semi OWL pinctrl driver
 
+config PINCTRL_S700
+	bool "Actions Semi S700 pinctrl driver"
+	depends on PINCTRL_OWL
+	help
+	  Say Y here to enable Actions Semi S700 pinctrl driver
+
 config PINCTRL_S900
 	bool "Actions Semi S900 pinctrl driver"
 	depends on PINCTRL_OWL
diff --git a/drivers/pinctrl/actions/Makefile b/drivers/pinctrl/actions/Makefile
index bd232d28400f..86521ed837dd 100644
--- a/drivers/pinctrl/actions/Makefile
+++ b/drivers/pinctrl/actions/Makefile
@@ -1,2 +1,3 @@
 obj-$(CONFIG_PINCTRL_OWL)	+= pinctrl-owl.o
+obj-$(CONFIG_PINCTRL_S700) 	+= pinctrl-s700.o
 obj-$(CONFIG_PINCTRL_S900) 	+= pinctrl-s900.o
diff --git a/drivers/pinctrl/actions/pinctrl-owl.c b/drivers/pinctrl/actions/pinctrl-owl.c
index 004bdc66e158..fa8bffa46011 100644
--- a/drivers/pinctrl/actions/pinctrl-owl.c
+++ b/drivers/pinctrl/actions/pinctrl-owl.c
@@ -739,7 +739,7 @@ static void owl_gpio_irq_mask(struct irq_data *data)
 	val = readl_relaxed(gpio_base + port->intc_msk);
 	if (val == 0)
 		owl_gpio_update_reg(gpio_base + port->intc_ctl,
-					OWL_GPIO_CTLR_ENABLE, false);
+					OWL_GPIO_CTLR_ENABLE + port->shared_ctl_offset * 5, false);
 
 	raw_spin_unlock_irqrestore(&pctrl->lock, flags);
 }
@@ -763,7 +763,8 @@ static void owl_gpio_irq_unmask(struct irq_data *data)
 
 	/* enable port interrupt */
 	value = readl_relaxed(gpio_base + port->intc_ctl);
-	value |= BIT(OWL_GPIO_CTLR_ENABLE) | BIT(OWL_GPIO_CTLR_SAMPLE_CLK_24M);
+	value |= ((BIT(OWL_GPIO_CTLR_ENABLE) | BIT(OWL_GPIO_CTLR_SAMPLE_CLK_24M))
+			<< port->shared_ctl_offset * 5);
 	writel_relaxed(value, gpio_base + port->intc_ctl);
 
 	/* enable GPIO interrupt */
@@ -801,7 +802,7 @@ static void owl_gpio_irq_ack(struct irq_data *data)
 	raw_spin_lock_irqsave(&pctrl->lock, flags);
 
 	owl_gpio_update_reg(gpio_base + port->intc_ctl,
-				OWL_GPIO_CTLR_PENDING, true);
+				OWL_GPIO_CTLR_PENDING + port->shared_ctl_offset * 5, true);
 
 	raw_spin_unlock_irqrestore(&pctrl->lock, flags);
 }
diff --git a/drivers/pinctrl/actions/pinctrl-s700.c b/drivers/pinctrl/actions/pinctrl-s700.c
new file mode 100644
index 000000000000..df69827803a0
--- /dev/null
+++ b/drivers/pinctrl/actions/pinctrl-s700.c
@@ -0,0 +1,1925 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * OWL S700 Pinctrl driver
+ *
+ * Copyright (c) 2014 Actions Semi Inc.
+ * Author: David Liu <liuwei@actions-semi.com>
+ *
+ * Author: Pathiban Nallathambi <pn@denx.de>
+ * Author: Saravanan Sekar <sravanhome@gmail.com>
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include "pinctrl-owl.h"
+
+/* Pinctrl registers offset */
+#define MFCTL0			(0x0040)
+#define MFCTL1			(0x0044)
+#define MFCTL2			(0x0048)
+#define MFCTL3			(0x004C)
+#define PAD_PULLCTL0		(0x0060)
+#define PAD_PULLCTL1		(0x0064)
+#define PAD_PULLCTL2		(0x0068)
+#define PAD_ST0			(0x006C)
+#define PAD_ST1			(0x0070)
+#define PAD_CTL			(0x0074)
+#define PAD_DRV0		(0x0080)
+#define PAD_DRV1		(0x0084)
+#define PAD_DRV2		(0x0088)
+
+/*
+ * Most pins affected by the pinmux can also be GPIOs. Define these first.
+ * These must match how the GPIO driver names/numbers its pins.
+ */
+#define _GPIOA(offset)		(offset)
+#define _GPIOB(offset)		(32 + (offset))
+#define _GPIOC(offset)		(64 + (offset))
+#define _GPIOD(offset)		(96 + (offset))
+#define _GPIOE(offset)		(128 + (offset))
+
+/* All non-GPIO pins follow */
+#define NUM_GPIOS		(_GPIOE(7) + 1)
+#define _PIN(offset)		(NUM_GPIOS + (offset))
+
+/* Ethernet MAC */
+#define ETH_TXD0		_GPIOA(14)
+#define ETH_TXD1		_GPIOA(15)
+#define ETH_TXD2		_GPIOE(4)
+#define ETH_TXD3		_GPIOE(5)
+#define ETH_TXEN		_GPIOA(16)
+#define ETH_RXER		_GPIOA(17)
+#define ETH_CRS_DV		_GPIOA(18)
+#define ETH_RXD1		_GPIOA(19)
+#define ETH_RXD0		_GPIOA(20)
+#define ETH_RXD2		_GPIOE(6)
+#define ETH_RXD3		_GPIOE(7)
+#define ETH_REF_CLK		_GPIOA(21)
+#define ETH_MDC			_GPIOA(22)
+#define ETH_MDIO		_GPIOA(23)
+
+/* SIRQ */
+#define SIRQ0			_GPIOA(24)
+#define SIRQ1			_GPIOA(25)
+#define SIRQ2			_GPIOA(26)
+
+/* I2S */
+#define I2S_D0			_GPIOA(27)
+#define I2S_BCLK0		_GPIOA(28)
+#define I2S_LRCLK0		_GPIOA(29)
+#define I2S_MCLK0		_GPIOA(30)
+#define I2S_D1			_GPIOA(31)
+#define I2S_BCLK1		_GPIOB(0)
+#define I2S_LRCLK1		_GPIOB(1)
+#define I2S_MCLK1		_GPIOB(2)
+
+/* PCM1 */
+#define PCM1_IN			_GPIOD(28)
+#define PCM1_CLK		_GPIOD(29)
+#define PCM1_SYNC		_GPIOD(30)
+#define PCM1_OUT		_GPIOD(31)
+
+/* KEY */
+#define KS_IN0			_GPIOB(3)
+#define KS_IN1			_GPIOB(4)
+#define KS_IN2			_GPIOB(5)
+#define KS_IN3			_GPIOB(6)
+#define KS_OUT0			_GPIOB(7)
+#define KS_OUT1			_GPIOB(8)
+#define KS_OUT2			_GPIOB(9)
+
+/* LVDS */
+#define LVDS_OEP		_GPIOB(10)
+#define LVDS_OEN		_GPIOB(11)
+#define LVDS_ODP		_GPIOB(12)
+#define LVDS_ODN		_GPIOB(13)
+#define LVDS_OCP		_GPIOB(14)
+#define LVDS_OCN		_GPIOB(15)
+#define LVDS_OBP		_GPIOB(16)
+#define LVDS_OBN		_GPIOB(17)
+#define LVDS_OAP		_GPIOB(18)
+#define LVDS_OAN		_GPIOB(19)
+#define LVDS_EEP		_GPIOB(20)
+#define LVDS_EEN		_GPIOB(21)
+#define LVDS_EDP		_GPIOB(22)
+#define LVDS_EDN		_GPIOB(23)
+#define LVDS_ECP		_GPIOB(24)
+#define LVDS_ECN		_GPIOB(25)
+#define LVDS_EBP		_GPIOB(26)
+#define LVDS_EBN		_GPIOB(27)
+#define LVDS_EAP		_GPIOB(28)
+#define LVDS_EAN		_GPIOB(29)
+#define LCD0_D18		_GPIOB(30)
+#define LCD0_D2			_GPIOB(31)
+
+/* DSI */
+#define DSI_DP3			_GPIOC(0)
+#define DSI_DN3			_GPIOC(1)
+#define DSI_DP1			_GPIOC(2)
+#define DSI_DN1			_GPIOC(3)
+#define DSI_CP			_GPIOC(4)
+#define DSI_CN			_GPIOC(5)
+#define DSI_DP0			_GPIOC(6)
+#define DSI_DN0			_GPIOC(7)
+#define DSI_DP2			_GPIOC(8)
+#define DSI_DN2			_GPIOC(9)
+
+/* SD */
+#define SD0_D0			_GPIOC(10)
+#define SD0_D1			_GPIOC(11)
+#define SD0_D2			_GPIOC(12)
+#define SD0_D3			_GPIOC(13)
+#define SD0_D4			_GPIOC(14)
+#define SD0_D5			_GPIOC(15)
+#define SD0_D6			_GPIOC(16)
+#define SD0_D7			_GPIOC(17)
+#define SD0_CMD			_GPIOC(18)
+#define SD0_CLK			_GPIOC(19)
+#define SD1_CMD			_GPIOC(20)
+#define SD1_CLK			_GPIOC(21)
+#define SD1_D0			SD0_D4
+#define SD1_D1			SD0_D5
+#define SD1_D2			SD0_D6
+#define SD1_D3			SD0_D7
+
+/* SPI */
+#define SPI0_SS			_GPIOC(23)
+#define SPI0_MISO		_GPIOC(24)
+
+/* UART for console */
+#define UART0_RX		_GPIOC(26)
+#define UART0_TX		_GPIOC(27)
+
+/* UART for Bluetooth */
+#define UART2_RX		_GPIOD(18)
+#define UART2_TX		_GPIOD(19)
+#define UART2_RTSB		_GPIOD(20)
+#define UART2_CTSB		_GPIOD(21)
+
+/* UART for 3G */
+#define UART3_RX		_GPIOD(22)
+#define UART3_TX		_GPIOD(23)
+#define UART3_RTSB		_GPIOD(24)
+#define UART3_CTSB		_GPIOD(25)
+
+/* I2C */
+#define I2C0_SCLK		_GPIOC(28)
+#define I2C0_SDATA		_GPIOC(29)
+#define I2C1_SCLK		_GPIOE(0)
+#define I2C1_SDATA		_GPIOE(1)
+#define I2C2_SCLK		_GPIOE(2)
+#define I2C2_SDATA		_GPIOE(3)
+
+/* CSI*/
+#define CSI_DN0			_PIN(0)
+#define CSI_DP0			_PIN(1)
+#define CSI_DN1			_PIN(2)
+#define CSI_DP1			_PIN(3)
+#define CSI_CN			_PIN(4)
+#define CSI_CP			_PIN(5)
+#define CSI_DN2			_PIN(6)
+#define CSI_DP2			_PIN(7)
+#define CSI_DN3			_PIN(8)
+#define CSI_DP3			_PIN(9)
+
+/* Sensor */
+#define SENSOR0_PCLK		_GPIOC(31)
+#define SENSOR0_CKOUT		_GPIOD(10)
+
+/* NAND (1.8v / 3.3v) */
+#define DNAND_D0		_PIN(10)
+#define DNAND_D1		_PIN(11)
+#define DNAND_D2		_PIN(12)
+#define DNAND_D3		_PIN(13)
+#define DNAND_D4		_PIN(14)
+#define DNAND_D5		_PIN(15)
+#define DNAND_D6		_PIN(16)
+#define DNAND_D7		_PIN(17)
+#define DNAND_WRB		_PIN(18)
+#define DNAND_RDB		_PIN(19)
+#define DNAND_RDBN		_PIN(20)
+#define DNAND_DQS		_GPIOA(12)
+#define DNAND_DQSN		_GPIOA(13)
+#define DNAND_RB0		_PIN(21)
+#define DNAND_ALE		_GPIOD(12)
+#define DNAND_CLE		_GPIOD(13)
+#define DNAND_CEB0		_GPIOD(14)
+#define DNAND_CEB1		_GPIOD(15)
+#define DNAND_CEB2		_GPIOD(16)
+#define DNAND_CEB3		_GPIOD(17)
+
+/* System */
+#define PORB			_PIN(22)
+#define CLKO_25M		_PIN(23)
+#define BSEL			_PIN(24)
+#define PKG0			_PIN(25)
+#define PKG1			_PIN(26)
+#define PKG2			_PIN(27)
+#define PKG3			_PIN(28)
+
+#define _FIRSTPAD		_GPIOA(0)
+#define _LASTPAD		PKG3
+#define NUM_PADS		(_LASTPAD - _FIRSTPAD + 1)
+
+/* Pad names for the pinmux subsystem */
+static const struct pinctrl_pin_desc s700_pads[] = {
+	PINCTRL_PIN(ETH_TXD0, "eth_txd0"),
+	PINCTRL_PIN(ETH_TXD1, "eth_txd1"),
+	PINCTRL_PIN(ETH_TXD2, "eth_txd2"),
+	PINCTRL_PIN(ETH_TXD3, "eth_txd3"),
+	PINCTRL_PIN(ETH_TXEN, "eth_txen"),
+	PINCTRL_PIN(ETH_RXER, "eth_rxer"),
+	PINCTRL_PIN(ETH_CRS_DV, "eth_crs_dv"),
+	PINCTRL_PIN(ETH_RXD1, "eth_rxd1"),
+	PINCTRL_PIN(ETH_RXD0, "eth_rxd0"),
+	PINCTRL_PIN(ETH_RXD2, "eth_rxd2"),
+	PINCTRL_PIN(ETH_RXD3, "eth_rxd3"),
+	PINCTRL_PIN(ETH_REF_CLK, "eth_ref_clk"),
+	PINCTRL_PIN(ETH_MDC, "eth_mdc"),
+	PINCTRL_PIN(ETH_MDIO, "eth_mdio"),
+	PINCTRL_PIN(SIRQ0, "sirq0"),
+	PINCTRL_PIN(SIRQ1, "sirq1"),
+	PINCTRL_PIN(SIRQ2, "sirq2"),
+	PINCTRL_PIN(I2S_D0, "i2s_d0"),
+	PINCTRL_PIN(I2S_BCLK0, "i2s_bclk0"),
+	PINCTRL_PIN(I2S_LRCLK0, "i2s_lrclk0"),
+	PINCTRL_PIN(I2S_MCLK0, "i2s_mclk0"),
+	PINCTRL_PIN(I2S_D1, "i2s_d1"),
+	PINCTRL_PIN(I2S_BCLK1, "i2s_bclk1"),
+	PINCTRL_PIN(I2S_LRCLK1, "i2s_lrclk1"),
+	PINCTRL_PIN(I2S_MCLK1, "i2s_mclk1"),
+	PINCTRL_PIN(PCM1_IN, "pcm1_in"),
+	PINCTRL_PIN(PCM1_CLK, "pcm1_clk"),
+	PINCTRL_PIN(PCM1_SYNC, "pcm1_sync"),
+	PINCTRL_PIN(PCM1_OUT, "pcm1_out"),
+	PINCTRL_PIN(KS_IN0, "ks_in0"),
+	PINCTRL_PIN(KS_IN1, "ks_in1"),
+	PINCTRL_PIN(KS_IN2, "ks_in2"),
+	PINCTRL_PIN(KS_IN3, "ks_in3"),
+	PINCTRL_PIN(KS_OUT0, "ks_out0"),
+	PINCTRL_PIN(KS_OUT1, "ks_out1"),
+	PINCTRL_PIN(KS_OUT2, "ks_out2"),
+	PINCTRL_PIN(LVDS_OEP, "lvds_oep"),
+	PINCTRL_PIN(LVDS_OEN, "lvds_oen"),
+	PINCTRL_PIN(LVDS_ODP, "lvds_odp"),
+	PINCTRL_PIN(LVDS_ODN, "lvds_odn"),
+	PINCTRL_PIN(LVDS_OCP, "lvds_ocp"),
+	PINCTRL_PIN(LVDS_OCN, "lvds_ocn"),
+	PINCTRL_PIN(LVDS_OBP, "lvds_obp"),
+	PINCTRL_PIN(LVDS_OBN, "lvds_obn"),
+	PINCTRL_PIN(LVDS_OAP, "lvds_oap"),
+	PINCTRL_PIN(LVDS_OAN, "lvds_oan"),
+	PINCTRL_PIN(LVDS_EEP, "lvds_eep"),
+	PINCTRL_PIN(LVDS_EEN, "lvds_een"),
+	PINCTRL_PIN(LVDS_EDP, "lvds_edp"),
+	PINCTRL_PIN(LVDS_EDN, "lvds_edn"),
+	PINCTRL_PIN(LVDS_ECP, "lvds_ecp"),
+	PINCTRL_PIN(LVDS_ECN, "lvds_ecn"),
+	PINCTRL_PIN(LVDS_EBP, "lvds_ebp"),
+	PINCTRL_PIN(LVDS_EBN, "lvds_ebn"),
+	PINCTRL_PIN(LVDS_EAP, "lvds_eap"),
+	PINCTRL_PIN(LVDS_EAN, "lvds_ean"),
+	PINCTRL_PIN(LCD0_D18, "lcd0_d18"),
+	PINCTRL_PIN(LCD0_D2, "lcd0_d2"),
+	PINCTRL_PIN(DSI_DP3, "dsi_dp3"),
+	PINCTRL_PIN(DSI_DN3, "dsi_dn3"),
+	PINCTRL_PIN(DSI_DP1, "dsi_dp1"),
+	PINCTRL_PIN(DSI_DN1, "dsi_dn1"),
+	PINCTRL_PIN(DSI_CP, "dsi_cp"),
+	PINCTRL_PIN(DSI_CN, "dsi_cn"),
+	PINCTRL_PIN(DSI_DP0, "dsi_dp0"),
+	PINCTRL_PIN(DSI_DN0, "dsi_dn0"),
+	PINCTRL_PIN(DSI_DP2, "dsi_dp2"),
+	PINCTRL_PIN(DSI_DN2, "dsi_dn2"),
+	PINCTRL_PIN(SD0_D0, "sd0_d0"),
+	PINCTRL_PIN(SD0_D1, "sd0_d1"),
+	PINCTRL_PIN(SD0_D2, "sd0_d2"),
+	PINCTRL_PIN(SD0_D3, "sd0_d3"),
+	PINCTRL_PIN(SD1_D0, "sd1_d0"),
+	PINCTRL_PIN(SD1_D1, "sd1_d1"),
+	PINCTRL_PIN(SD1_D2, "sd1_d2"),
+	PINCTRL_PIN(SD1_D3, "sd1_d3"),
+	PINCTRL_PIN(SD0_CMD, "sd0_cmd"),
+	PINCTRL_PIN(SD0_CLK, "sd0_clk"),
+	PINCTRL_PIN(SD1_CMD, "sd1_cmd"),
+	PINCTRL_PIN(SD1_CLK, "sd1_clk"),
+	PINCTRL_PIN(SPI0_SS, "spi0_ss"),
+	PINCTRL_PIN(SPI0_MISO, "spi0_miso"),
+	PINCTRL_PIN(UART0_RX, "uart0_rx"),
+	PINCTRL_PIN(UART0_TX, "uart0_tx"),
+	PINCTRL_PIN(UART2_RX, "uart2_rx"),
+	PINCTRL_PIN(UART2_TX, "uart2_tx"),
+	PINCTRL_PIN(UART2_RTSB, "uart2_rtsb"),
+	PINCTRL_PIN(UART2_CTSB, "uart2_ctsb"),
+	PINCTRL_PIN(UART3_RX, "uart3_rx"),
+	PINCTRL_PIN(UART3_TX, "uart3_tx"),
+	PINCTRL_PIN(UART3_RTSB, "uart3_rtsb"),
+	PINCTRL_PIN(UART3_CTSB, "uart3_ctsb"),
+	PINCTRL_PIN(I2C0_SCLK, "i2c0_sclk"),
+	PINCTRL_PIN(I2C0_SDATA, "i2c0_sdata"),
+	PINCTRL_PIN(I2C1_SCLK, "i2c1_sclk"),
+	PINCTRL_PIN(I2C1_SDATA, "i2c1_sdata"),
+	PINCTRL_PIN(I2C2_SCLK, "i2c2_sclk"),
+	PINCTRL_PIN(I2C2_SDATA, "i2c2_sdata"),
+	PINCTRL_PIN(CSI_DN0, "csi_dn0"),
+	PINCTRL_PIN(CSI_DP0, "csi_dp0"),
+	PINCTRL_PIN(CSI_DN1, "csi_dn1"),
+	PINCTRL_PIN(CSI_DP1, "csi_dp1"),
+	PINCTRL_PIN(CSI_CN, "csi_cn"),
+	PINCTRL_PIN(CSI_CP, "csi_cp"),
+	PINCTRL_PIN(CSI_DN2, "csi_dn2"),
+	PINCTRL_PIN(CSI_DP2, "csi_dp2"),
+	PINCTRL_PIN(CSI_DN3, "csi_dn3"),
+	PINCTRL_PIN(CSI_DP3, "csi_dp3"),
+	PINCTRL_PIN(SENSOR0_PCLK, "sensor0_pclk"),
+	PINCTRL_PIN(SENSOR0_CKOUT, "sensor0_ckout"),
+	PINCTRL_PIN(DNAND_D0, "dnand_d0"),
+	PINCTRL_PIN(DNAND_D1, "dnand_d1"),
+	PINCTRL_PIN(DNAND_D2, "dnand_d2"),
+	PINCTRL_PIN(DNAND_D3, "dnand_d3"),
+	PINCTRL_PIN(DNAND_D4, "dnand_d4"),
+	PINCTRL_PIN(DNAND_D5, "dnand_d5"),
+	PINCTRL_PIN(DNAND_D6, "dnand_d6"),
+	PINCTRL_PIN(DNAND_D7, "dnand_d7"),
+	PINCTRL_PIN(DNAND_WRB, "dnand_wrb"),
+	PINCTRL_PIN(DNAND_RDB, "dnand_rdb"),
+	PINCTRL_PIN(DNAND_RDBN, "dnand_rdbn"),
+	PINCTRL_PIN(DNAND_DQS, "dnand_dqs"),
+	PINCTRL_PIN(DNAND_DQSN, "dnand_dqsn"),
+	PINCTRL_PIN(DNAND_RB0, "dnand_rb0"),
+	PINCTRL_PIN(DNAND_ALE, "dnand_ale"),
+	PINCTRL_PIN(DNAND_CLE, "dnand_cle"),
+	PINCTRL_PIN(DNAND_CEB0, "dnand_ceb0"),
+	PINCTRL_PIN(DNAND_CEB1, "dnand_ceb1"),
+	PINCTRL_PIN(DNAND_CEB2, "dnand_ceb2"),
+	PINCTRL_PIN(DNAND_CEB3, "dnand_ceb3"),
+	PINCTRL_PIN(PORB, "porb"),
+	PINCTRL_PIN(CLKO_25M, "clko_25m"),
+	PINCTRL_PIN(BSEL, "bsel"),
+	PINCTRL_PIN(PKG0, "pkg0"),
+	PINCTRL_PIN(PKG1, "pkg1"),
+	PINCTRL_PIN(PKG2, "pkg2"),
+	PINCTRL_PIN(PKG3, "pkg3"),
+};
+
+enum s700_pinmux_functions {
+	S700_MUX_NOR,
+	S700_MUX_ETH_RGMII,
+	S700_MUX_ETH_SGMII,
+	S700_MUX_SPI0,
+	S700_MUX_SPI1,
+	S700_MUX_SPI2,
+	S700_MUX_SPI3,
+	S700_MUX_SENS0,
+	S700_MUX_SENS1,
+	S700_MUX_UART0,
+	S700_MUX_UART1,
+	S700_MUX_UART2,
+	S700_MUX_UART3,
+	S700_MUX_UART4,
+	S700_MUX_UART5,
+	S700_MUX_UART6,
+	S700_MUX_I2S0,
+	S700_MUX_I2S1,
+	S700_MUX_PCM1,
+	S700_MUX_PCM0,
+	S700_MUX_KS,
+	S700_MUX_JTAG,
+	S700_MUX_PWM0,
+	S700_MUX_PWM1,
+	S700_MUX_PWM2,
+	S700_MUX_PWM3,
+	S700_MUX_PWM4,
+	S700_MUX_PWM5,
+	S700_MUX_P0,
+	S700_MUX_SD0,
+	S700_MUX_SD1,
+	S700_MUX_SD2,
+	S700_MUX_I2C0,
+	S700_MUX_I2C1,
+	S700_MUX_I2C2,
+	S700_MUX_I2C3,
+	S700_MUX_DSI,
+	S700_MUX_LVDS,
+	S700_MUX_USB30,
+	S700_MUX_CLKO_25M,
+	S700_MUX_MIPI_CSI,
+	S700_MUX_NAND,
+	S700_MUX_SPDIF,
+	S700_MUX_SIRQ0,
+	S700_MUX_SIRQ1,
+	S700_MUX_SIRQ2,
+	S700_MUX_BT,
+	S700_MUX_LCD0,
+	S700_MUX_RESERVED,
+};
+
+/*****MFP group data****************************/
+/* mfp0_31_30 reserved */
+
+/* rgmii_txd23 */
+static unsigned int  rgmii_txd23_mfp_pads[]		= { ETH_TXD2, ETH_TXD3};
+static unsigned int  rgmii_txd23_mfp_funcs[]		= { S700_MUX_ETH_RGMII,
+							    S700_MUX_I2C1,
+							    S700_MUX_UART3 };
+/* rgmii_rxd2 */
+static unsigned int  rgmii_rxd2_mfp_pads[]		= { ETH_RXD2 };
+static unsigned int  rgmii_rxd2_mfp_funcs[]		= { S700_MUX_ETH_RGMII,
+							    S700_MUX_PWM0,
+							    S700_MUX_UART3 };
+/* rgmii_rxd3 */
+static unsigned int  rgmii_rxd3_mfp_pads[]		= { ETH_RXD3};
+static unsigned int  rgmii_rxd3_mfp_funcs[]		= { S700_MUX_ETH_RGMII,
+							    S700_MUX_PWM2,
+							    S700_MUX_UART3 };
+/* lcd0_d18 */
+static unsigned int  lcd0_d18_mfp_pads[]		= { LCD0_D18 };
+static unsigned int  lcd0_d18_mfp_funcs[]		= { S700_MUX_NOR,
+							    S700_MUX_SENS1,
+							    S700_MUX_PWM2,
+							    S700_MUX_PWM4,
+							    S700_MUX_LCD0 };
+/* rgmii_txd01 */
+static unsigned int  rgmii_txd01_mfp_pads[]		= { ETH_CRS_DV };
+static unsigned int  rgmii_txd01_mfp_funcs[]		= { S700_MUX_ETH_RGMII,
+							    S700_MUX_RESERVED,
+							    S700_MUX_SPI2,
+							    S700_MUX_UART4,
+							    S700_MUX_PWM4 };
+/* rgmii_txd0 */
+static unsigned int  rgmii_txd0_mfp_pads[]		= { ETH_TXD0 };
+static unsigned int  rgmii_txd0_mfp_funcs[]		= { S700_MUX_ETH_RGMII,
+							    S700_MUX_ETH_SGMII,
+							    S700_MUX_SPI2,
+							    S700_MUX_UART6,
+							    S700_MUX_PWM4 };
+/* rgmii_txd1 */
+static unsigned int  rgmii_txd1_mfp_pads[]		= { ETH_TXD1 };
+static unsigned int  rgmii_txd1_mfp_funcs[]		= { S700_MUX_ETH_RGMII,
+							    S700_MUX_ETH_SGMII,
+							    S700_MUX_SPI2,
+							    S700_MUX_UART6,
+							    S700_MUX_PWM5 };
+/* rgmii_txen */
+static unsigned int  rgmii_txen_mfp_pads[]		= { ETH_TXEN };
+static unsigned int  rgmii_txen_mfp_funcs[]		= { S700_MUX_ETH_RGMII,
+							    S700_MUX_UART2,
+							    S700_MUX_SPI3,
+							    S700_MUX_PWM0 };
+/* rgmii_rxen */
+static unsigned int  rgmii_rxen_mfp_pads[]		= { ETH_RXER };
+static unsigned int  rgmii_rxen_mfp_funcs[]		= { S700_MUX_ETH_RGMII,
+							    S700_MUX_UART2,
+							    S700_MUX_SPI3,
+							    S700_MUX_PWM1 };
+/* mfp0_12_11 reserved */
+/* rgmii_rxd1*/
+static unsigned int  rgmii_rxd1_mfp_pads[]		= { ETH_RXD1 };
+static unsigned int  rgmii_rxd1_mfp_funcs[]		= { S700_MUX_ETH_RGMII,
+							    S700_MUX_UART2,
+							    S700_MUX_SPI3,
+							    S700_MUX_PWM2,
+							    S700_MUX_UART5,
+							    S700_MUX_ETH_SGMII };
+/* rgmii_rxd0 */
+static unsigned int  rgmii_rxd0_mfp_pads[]		= { ETH_RXD0 };
+static unsigned int  rgmii_rxd0_mfp_funcs[]		= { S700_MUX_ETH_RGMII,
+							    S700_MUX_UART2,
+							    S700_MUX_SPI3,
+							    S700_MUX_PWM3,
+							    S700_MUX_UART5,
+							    S700_MUX_ETH_SGMII };
+/* rgmii_ref_clk */
+static unsigned int  rgmii_ref_clk_mfp_pads[]		= { ETH_REF_CLK };
+static unsigned int  rgmii_ref_clk_mfp_funcs[]		= { S700_MUX_ETH_RGMII,
+							    S700_MUX_UART4,
+							    S700_MUX_SPI2,
+							    S700_MUX_RESERVED,
+							    S700_MUX_ETH_SGMII };
+/* i2s_d0 */
+static unsigned int  i2s_d0_mfp_pads[]			= { I2S_D0 };
+static unsigned int  i2s_d0_mfp_funcs[]			= { S700_MUX_I2S0,
+							    S700_MUX_NOR };
+/* i2s_pcm1 */
+static unsigned int  i2s_pcm1_mfp_pads[]		= { I2S_LRCLK0,
+							    I2S_MCLK0 };
+static unsigned int  i2s_pcm1_mfp_funcs[]		= { S700_MUX_I2S0,
+							    S700_MUX_NOR,
+							    S700_MUX_PCM1,
+							    S700_MUX_BT };
+/* i2s0_pcm0 */
+static unsigned int  i2s0_pcm0_mfp_pads[]		= { I2S_BCLK0 };
+static unsigned int  i2s0_pcm0_mfp_funcs[]		= { S700_MUX_I2S0,
+							    S700_MUX_NOR,
+							    S700_MUX_PCM0,
+							    S700_MUX_BT };
+/* i2s1_pcm0 */
+static unsigned int  i2s1_pcm0_mfp_pads[]		= { I2S_BCLK1,
+							    I2S_LRCLK1,
+							    I2S_MCLK1 };
+
+static unsigned int  i2s1_pcm0_mfp_funcs[]		= { S700_MUX_I2S1,
+							    S700_MUX_NOR,
+							    S700_MUX_PCM0,
+							    S700_MUX_BT };
+/* i2s_d1 */
+static unsigned int  i2s_d1_mfp_pads[]			= { I2S_D1 };
+static unsigned int  i2s_d1_mfp_funcs[]			= { S700_MUX_I2S1,
+							    S700_MUX_NOR };
+/* ks_in2 */
+static unsigned int  ks_in2_mfp_pads[]			= { KS_IN2 };
+static unsigned int  ks_in2_mfp_funcs[]			= { S700_MUX_KS,
+							    S700_MUX_JTAG,
+							    S700_MUX_NOR,
+							    S700_MUX_BT,
+							    S700_MUX_PWM0,
+							    S700_MUX_SENS1,
+							    S700_MUX_PWM0,
+							    S700_MUX_P0 };
+/* ks_in1 */
+static unsigned int  ks_in1_mfp_pads[]			= { KS_IN1 };
+static unsigned int  ks_in1_mfp_funcs[]			= { S700_MUX_KS,
+							    S700_MUX_JTAG,
+							    S700_MUX_NOR,
+							    S700_MUX_BT,
+							    S700_MUX_PWM5,
+							    S700_MUX_SENS1,
+							    S700_MUX_PWM1,
+							    S700_MUX_USB30 };
+/* ks_in0 */
+static unsigned int  ks_in0_mfp_pads[]			= { KS_IN0 };
+static unsigned int  ks_in0_mfp_funcs[]			= { S700_MUX_KS,
+							    S700_MUX_JTAG,
+							    S700_MUX_NOR,
+							    S700_MUX_BT,
+							    S700_MUX_PWM4,
+							    S700_MUX_SENS1,
+							    S700_MUX_PWM4,
+							    S700_MUX_P0 };
+/* ks_in3 */
+static unsigned int  ks_in3_mfp_pads[]			= { KS_IN3 };
+static unsigned int  ks_in3_mfp_funcs[]			= { S700_MUX_KS,
+							    S700_MUX_JTAG,
+							    S700_MUX_NOR,
+							    S700_MUX_PWM1,
+							    S700_MUX_BT,
+							    S700_MUX_SENS1 };
+/* ks_out0 */
+static unsigned int  ks_out0_mfp_pads[]			= { KS_OUT0 };
+static unsigned int  ks_out0_mfp_funcs[]		= { S700_MUX_KS,
+							    S700_MUX_UART5,
+							    S700_MUX_NOR,
+							    S700_MUX_PWM2,
+							    S700_MUX_BT,
+							    S700_MUX_SENS1,
+							    S700_MUX_SD0,
+							    S700_MUX_UART4 };
+
+/* ks_out1 */
+static unsigned int  ks_out1_mfp_pads[]			= { KS_OUT1 };
+static unsigned int  ks_out1_mfp_funcs[]		= { S700_MUX_KS,
+							    S700_MUX_JTAG,
+							    S700_MUX_NOR,
+							    S700_MUX_PWM3,
+							    S700_MUX_BT,
+							    S700_MUX_SENS1,
+							    S700_MUX_SD0,
+							    S700_MUX_UART4 };
+/* ks_out2 */
+static unsigned int  ks_out2_mfp_pads[]			= { KS_OUT2 };
+static unsigned int  ks_out2_mfp_funcs[]		= { S700_MUX_SD0,
+							    S700_MUX_KS,
+							    S700_MUX_NOR,
+							    S700_MUX_PWM2,
+							    S700_MUX_UART5,
+							    S700_MUX_SENS1,
+							    S700_MUX_BT };
+/* lvds_o_pn */
+static unsigned int  lvds_o_pn_mfp_pads[]		= { LVDS_OEP,
+							    LVDS_OEN,
+							    LVDS_ODP,
+							    LVDS_ODN,
+							    LVDS_OCP,
+							    LVDS_OCN,
+							    LVDS_OBP,
+							    LVDS_OBN,
+							    LVDS_OAP,
+							    LVDS_OAN };
+
+static unsigned int  lvds_o_pn_mfp_funcs[]		= { S700_MUX_LVDS,
+							    S700_MUX_BT,
+							    S700_MUX_LCD0 };
+
+/* dsi_dn0 */
+static unsigned int  dsi_dn0_mfp_pads[]			= { DSI_DN0 };
+static unsigned int  dsi_dn0_mfp_funcs[]		= { S700_MUX_DSI,
+							    S700_MUX_UART2,
+							    S700_MUX_SPI0 };
+/* dsi_dp2 */
+static unsigned int  dsi_dp2_mfp_pads[]			= { DSI_DP2 };
+static unsigned int  dsi_dp2_mfp_funcs[]		= { S700_MUX_DSI,
+							    S700_MUX_UART2,
+							    S700_MUX_SPI0,
+							    S700_MUX_SD1 };
+/* lcd0_d2 */
+static unsigned int  lcd0_d2_mfp_pads[]			= { LCD0_D2 };
+static unsigned int  lcd0_d2_mfp_funcs[]		= { S700_MUX_NOR,
+							    S700_MUX_SD0,
+							    S700_MUX_RESERVED,
+							    S700_MUX_PWM3,
+							    S700_MUX_LCD0 };
+/* dsi_dp3 */
+static unsigned int  dsi_dp3_mfp_pads[]			= { DSI_DP3 };
+static unsigned int  dsi_dp3_mfp_funcs[]		= { S700_MUX_DSI,
+							    S700_MUX_SD0,
+							    S700_MUX_SD1,
+							    S700_MUX_LCD0 };
+/* dsi_dn3 */
+static unsigned int  dsi_dn3_mfp_pads[]			= { DSI_DN3 };
+static unsigned int  dsi_dn3_mfp_funcs[]		= { S700_MUX_DSI,
+							    S700_MUX_SD0,
+							    S700_MUX_SD1,
+							    S700_MUX_LCD0 };
+/* dsi_dp0 */
+static unsigned int  dsi_dp0_mfp_pads[]			= { DSI_DP0 };
+static unsigned int  dsi_dp0_mfp_funcs[]		= { S700_MUX_DSI,
+							    S700_MUX_RESERVED,
+							    S700_MUX_SD0,
+							    S700_MUX_UART2,
+							    S700_MUX_SPI0 };
+/* lvds_ee_pn */
+static unsigned int  lvds_ee_pn_mfp_pads[]		= { LVDS_EEP,
+							    LVDS_EEN };
+static unsigned int  lvds_ee_pn_mfp_funcs[]		= { S700_MUX_LVDS,
+							    S700_MUX_NOR,
+							    S700_MUX_BT,
+							    S700_MUX_LCD0 };
+/* uart2_rx_tx */
+static unsigned int  uart2_rx_tx_mfp_pads[]		= { UART2_RX,
+							    UART2_TX };
+static unsigned int  uart2_rx_tx_mfp_funcs[]		= { S700_MUX_UART2,
+							    S700_MUX_NOR,
+							    S700_MUX_SPI0,
+							    S700_MUX_PCM0 };
+/* spi0_i2c_pcm */
+static unsigned int  spi0_i2c_pcm_mfp_pads[]		= { SPI0_SS,
+							    SPI0_MISO };
+static unsigned int  spi0_i2c_pcm_mfp_funcs[]		= { S700_MUX_SPI0,
+							    S700_MUX_NOR,
+							    S700_MUX_I2S1,
+							    S700_MUX_PCM1,
+							    S700_MUX_PCM0,
+							    S700_MUX_I2C2 };
+/* mfp2_31 reserved */
+
+/* dsi_dnp1_cp_d2 */
+static unsigned int  dsi_dnp1_cp_d2_mfp_pads[]		= { DSI_DP1,
+							    DSI_CP,
+							    DSI_CN };
+static unsigned int  dsi_dnp1_cp_d2_mfp_funcs[]		= { S700_MUX_DSI,
+							    S700_MUX_LCD0,
+							    S700_MUX_RESERVED };
+/* dsi_dnp1_cp_d17 */
+static unsigned int  dsi_dnp1_cp_d17_mfp_pads[]		= { DSI_DP1,
+							    DSI_CP,
+							    DSI_CN };
+
+static unsigned int  dsi_dnp1_cp_d17_mfp_funcs[]	= { S700_MUX_DSI,
+							    S700_MUX_RESERVED,
+							    S700_MUX_LCD0 };
+/* lvds_e_pn */
+static unsigned int  lvds_e_pn_mfp_pads[]		= { LVDS_EDP,
+							    LVDS_EDN,
+							    LVDS_ECP,
+							    LVDS_ECN,
+							    LVDS_EBP,
+							    LVDS_EBN,
+							    LVDS_EAP,
+							    LVDS_EAN };
+
+static unsigned int  lvds_e_pn_mfp_funcs[]		= { S700_MUX_LVDS,
+							    S700_MUX_NOR,
+							    S700_MUX_LCD0 };
+/* dsi_dn2 */
+static unsigned int  dsi_dn2_mfp_pads[]			= { DSI_DN2 };
+static unsigned int  dsi_dn2_mfp_funcs[]		= { S700_MUX_DSI,
+							    S700_MUX_RESERVED,
+							    S700_MUX_SD1,
+							    S700_MUX_UART2,
+							    S700_MUX_SPI0 };
+/* uart2_rtsb */
+static unsigned int  uart2_rtsb_mfp_pads[]		= { UART2_RTSB };
+static unsigned int  uart2_rtsb_mfp_funcs[]		= { S700_MUX_UART2,
+							    S700_MUX_UART0 };
+
+/* uart2_ctsb */
+static unsigned int  uart2_ctsb_mfp_pads[]		= { UART2_CTSB };
+static unsigned int  uart2_ctsb_mfp_funcs[]		= { S700_MUX_UART2,
+							    S700_MUX_UART0 };
+/* uart3_rtsb */
+static unsigned int  uart3_rtsb_mfp_pads[]		= { UART3_RTSB };
+static unsigned int  uart3_rtsb_mfp_funcs[]		= { S700_MUX_UART3,
+							    S700_MUX_UART5 };
+
+/* uart3_ctsb */
+static unsigned int  uart3_ctsb_mfp_pads[]		= { UART3_CTSB };
+static unsigned int  uart3_ctsb_mfp_funcs[]		= { S700_MUX_UART3,
+							    S700_MUX_UART5 };
+/* sd0_d0 */
+static unsigned int  sd0_d0_mfp_pads[]			= { SD0_D0 };
+static unsigned int  sd0_d0_mfp_funcs[]			= { S700_MUX_SD0,
+							    S700_MUX_NOR,
+							    S700_MUX_RESERVED,
+							    S700_MUX_JTAG,
+							    S700_MUX_UART2,
+							    S700_MUX_UART5 };
+/* sd0_d1 */
+static unsigned int  sd0_d1_mfp_pads[]			= { SD0_D1 };
+static unsigned int  sd0_d1_mfp_funcs[]			= { S700_MUX_SD0,
+							    S700_MUX_NOR,
+							    S700_MUX_RESERVED,
+							    S700_MUX_RESERVED,
+							    S700_MUX_UART2,
+							    S700_MUX_UART5 };
+/* sd0_d2_d3 */
+static unsigned int  sd0_d2_d3_mfp_pads[]		= { SD0_D2,
+							    SD0_D3 };
+static unsigned int  sd0_d2_d3_mfp_funcs[]		= { S700_MUX_SD0,
+							    S700_MUX_NOR,
+							    S700_MUX_RESERVED,
+							    S700_MUX_JTAG,
+							    S700_MUX_UART2,
+							    S700_MUX_UART1 };
+
+/* sd1_d0_d3 */
+static unsigned int  sd1_d0_d3_mfp_pads[]		= { SD1_D0,
+							    SD1_D1,
+							    SD1_D2,
+							    SD1_D3 };
+static unsigned int  sd1_d0_d3_mfp_funcs[]		= { S700_MUX_SD0,
+							    S700_MUX_NOR,
+							    S700_MUX_RESERVED,
+							    S700_MUX_SD1 };
+
+/* sd0_cmd */
+static unsigned int  sd0_cmd_mfp_pads[]			= { SD0_CMD };
+static unsigned int  sd0_cmd_mfp_funcs[]		= { S700_MUX_SD0,
+							    S700_MUX_NOR,
+							    S700_MUX_RESERVED,
+							    S700_MUX_JTAG };
+/* sd0_clk */
+static unsigned int  sd0_clk_mfp_pads[]			= { SD0_CLK };
+static unsigned int  sd0_clk_mfp_funcs[]		= { S700_MUX_SD0,
+							    S700_MUX_RESERVED,
+							    S700_MUX_JTAG };
+/* sd1_cmd */
+static unsigned int  sd1_cmd_mfp_pads[]			= { SD1_CMD };
+static unsigned int  sd1_cmd_mfp_funcs[]		= { S700_MUX_SD1,
+							    S700_MUX_NOR };
+/* uart0_rx */
+static unsigned int  uart0_rx_mfp_pads[]		= { UART0_RX };
+static unsigned int  uart0_rx_mfp_funcs[]		= { S700_MUX_UART0,
+							    S700_MUX_UART2,
+							    S700_MUX_SPI1,
+							    S700_MUX_I2C0,
+							    S700_MUX_PCM1,
+							    S700_MUX_I2S1 };
+/* dnand_data_wr1 reserved */
+
+/* clko_25m */
+static unsigned int  clko_25m_mfp_pads[]		= { CLKO_25M };
+static unsigned int  clko_25m_mfp_funcs[]		= { S700_MUX_RESERVED,
+							    S700_MUX_CLKO_25M };
+/* csi_cn_cp */
+static unsigned int  csi_cn_cp_mfp_pads[]		= { CSI_CN,
+							    CSI_CP };
+static unsigned int  csi_cn_cp_mfp_funcs[]		= { S700_MUX_MIPI_CSI,
+							    S700_MUX_SENS0 };
+/* dnand_acle_ce07_24 reserved */
+
+/* sens0_ckout */
+static unsigned int  sens0_ckout_mfp_pads[]		= { SENSOR0_CKOUT };
+static unsigned int  sens0_ckout_mfp_funcs[]		= { S700_MUX_SENS0,
+							    S700_MUX_NOR,
+							    S700_MUX_SENS1,
+							    S700_MUX_PWM1 };
+/* uart0_tx */
+static unsigned int  uart0_tx_mfp_pads[]		= { UART0_TX };
+static unsigned int  uart0_tx_mfp_funcs[]		= { S700_MUX_UART0,
+							    S700_MUX_UART2,
+							    S700_MUX_SPI1,
+							    S700_MUX_I2C0,
+							    S700_MUX_SPDIF,
+							    S700_MUX_PCM1,
+							    S700_MUX_I2S1 };
+/* i2c0_mfp */
+static unsigned int  i2c0_mfp_pads[]		= { I2C0_SCLK,
+							    I2C0_SDATA };
+static unsigned int  i2c0_mfp_funcs[]		= { S700_MUX_I2C0,
+							    S700_MUX_UART2,
+							    S700_MUX_I2C1,
+							    S700_MUX_UART1,
+							    S700_MUX_SPI1 };
+/* csi_dn_dp */
+static unsigned int  csi_dn_dp_mfp_pads[]		= { CSI_DN0,
+							    CSI_DN1,
+							    CSI_DN2,
+							    CSI_DN3,
+							    CSI_DP0,
+							    CSI_DP1,
+							    CSI_DP2,
+							    CSI_DP3 };
+static unsigned int  csi_dn_dp_mfp_funcs[]		= { S700_MUX_MIPI_CSI,
+							    S700_MUX_SENS0 };
+/* sen0_pclk */
+static unsigned int  sen0_pclk_mfp_pads[]		= { SENSOR0_PCLK };
+static unsigned int  sen0_pclk_mfp_funcs[]		= { S700_MUX_SENS0,
+							    S700_MUX_NOR,
+							    S700_MUX_PWM0 };
+/* pcm1_in */
+static unsigned int  pcm1_in_mfp_pads[]			= { PCM1_IN };
+static unsigned int  pcm1_in_mfp_funcs[]		= { S700_MUX_PCM1,
+							    S700_MUX_SENS1,
+							    S700_MUX_BT,
+							    S700_MUX_PWM4 };
+/* pcm1_clk */
+static unsigned int  pcm1_clk_mfp_pads[]		= { PCM1_CLK };
+static unsigned int  pcm1_clk_mfp_funcs[]		= { S700_MUX_PCM1,
+							    S700_MUX_SENS1,
+							    S700_MUX_BT,
+							    S700_MUX_PWM5 };
+/* pcm1_sync */
+static unsigned int  pcm1_sync_mfp_pads[]		= { PCM1_SYNC };
+static unsigned int  pcm1_sync_mfp_funcs[]		= { S700_MUX_PCM1,
+							    S700_MUX_SENS1,
+							    S700_MUX_BT,
+							    S700_MUX_I2C3 };
+/* pcm1_out */
+static unsigned int  pcm1_out_mfp_pads[]		= { PCM1_OUT };
+static unsigned int  pcm1_out_mfp_funcs[]		= { S700_MUX_PCM1,
+							    S700_MUX_SENS1,
+							    S700_MUX_BT,
+							    S700_MUX_I2C3 };
+/* dnand_data_wr */
+static unsigned int  dnand_data_wr_mfp_pads[]		= { DNAND_D0,
+							    DNAND_D1,
+							    DNAND_D2,
+							    DNAND_D3,
+							    DNAND_D4,
+							    DNAND_D5,
+							    DNAND_D6,
+							    DNAND_D7,
+							    DNAND_RDB,
+							    DNAND_RDBN };
+static unsigned int  dnand_data_wr_mfp_funcs[]		= { S700_MUX_NAND,
+							    S700_MUX_SD2 };
+/* dnand_acle_ce0 */
+static unsigned int  dnand_acle_ce0_mfp_pads[]		= { DNAND_ALE,
+							    DNAND_CLE,
+							    DNAND_CEB0,
+							    DNAND_CEB1 };
+static unsigned int  dnand_acle_ce0_mfp_funcs[]		= { S700_MUX_NAND,
+							    S700_MUX_SPI2 };
+
+/* nand_ceb2 */
+static unsigned int  nand_ceb2_mfp_pads[]		= { DNAND_CEB2 };
+static unsigned int  nand_ceb2_mfp_funcs[]		= { S700_MUX_NAND,
+							    S700_MUX_PWM5 };
+/* nand_ceb3 */
+static unsigned int  nand_ceb3_mfp_pads[]		= { DNAND_CEB3 };
+static unsigned int  nand_ceb3_mfp_funcs[]		= { S700_MUX_NAND,
+							    S700_MUX_PWM4 };
+/*****End MFP group data****************************/
+
+/*****PADDRV group data****************************/
+
+/*PAD_DRV0*/
+static unsigned int  sirq_drv_pads[]			= { SIRQ0,
+							    SIRQ1,
+							    SIRQ2 };
+
+static unsigned int  rgmii_txd23_drv_pads[]		= { ETH_TXD2,
+							    ETH_TXD3 };
+
+static unsigned int  rgmii_rxd23_drv_pads[]		= { ETH_RXD2,
+							    ETH_RXD3 };
+
+static unsigned int  rgmii_txd01_txen_drv_pads[]	= { ETH_TXD0,
+							    ETH_TXD1,
+							    ETH_TXEN };
+
+static unsigned int  rgmii_rxer_drv_pads[]		= { ETH_RXER };
+
+static unsigned int  rgmii_crs_drv_pads[]		= { ETH_CRS_DV };
+
+static unsigned int  rgmii_rxd10_drv_pads[]		= { ETH_RXD0,
+							    ETH_RXD1 };
+
+static unsigned int  rgmii_ref_clk_drv_pads[]		= { ETH_REF_CLK };
+
+static unsigned int  smi_mdc_mdio_drv_pads[]		= { ETH_MDC,
+							    ETH_MDIO };
+
+static unsigned int  i2s_d0_drv_pads[]			= { I2S_D0 };
+
+static unsigned int  i2s_bclk0_drv_pads[]		= { I2S_BCLK0 };
+
+static unsigned int  i2s3_drv_pads[]			= { I2S_LRCLK0,
+							    I2S_MCLK0,
+							    I2S_D1 };
+
+static unsigned int  i2s13_drv_pads[]			= { I2S_BCLK1,
+							    I2S_LRCLK1,
+							    I2S_MCLK1 };
+
+static unsigned int  pcm1_drv_pads[]			= { PCM1_IN,
+							    PCM1_CLK,
+							    PCM1_SYNC,
+							    PCM1_OUT };
+
+static unsigned int  ks_in_drv_pads[]			= { KS_IN0,
+							    KS_IN1,
+							    KS_IN2,
+							    KS_IN3 };
+
+/*PAD_DRV1*/
+static unsigned int  ks_out_drv_pads[]			= { KS_OUT0,
+							    KS_OUT1,
+							    KS_OUT2 };
+
+static unsigned int  lvds_all_drv_pads[]		= { LVDS_OEP,
+							    LVDS_OEN,
+							    LVDS_ODP,
+							    LVDS_ODN,
+							    LVDS_OCP,
+							    LVDS_OCN,
+							    LVDS_OBP,
+							    LVDS_OBN,
+							    LVDS_OAP,
+							    LVDS_OAN,
+							    LVDS_EEP,
+							    LVDS_EEN,
+							    LVDS_EDP,
+							    LVDS_EDN,
+							    LVDS_ECP,
+							    LVDS_ECN,
+							    LVDS_EBP,
+							    LVDS_EBN,
+							    LVDS_EAP,
+							    LVDS_EAN };
+
+static unsigned int  lcd_d18_d2_drv_pads[]		= { LCD0_D18,
+							    LCD0_D2 };
+
+static unsigned int  dsi_all_drv_pads[]			= { DSI_DP0,
+							    DSI_DN0,
+							    DSI_DP2,
+							    DSI_DN2,
+							    DSI_DP3,
+							    DSI_DN3,
+							    DSI_DP1,
+							    DSI_DN1,
+							    DSI_CP,
+							    DSI_CN };
+
+static unsigned int  sd0_d0_d3_drv_pads[]		= { SD0_D0,
+							    SD0_D1,
+							    SD0_D2,
+							    SD0_D3 };
+
+static unsigned int  sd0_cmd_drv_pads[]			= { SD0_CMD };
+
+static unsigned int  sd0_clk_drv_pads[]			= { SD0_CLK };
+
+static unsigned int  spi0_all_drv_pads[]		= { SPI0_SS,
+							    SPI0_MISO };
+
+/*PAD_DRV2*/
+static unsigned int  uart0_rx_drv_pads[]		= { UART0_RX };
+
+static unsigned int  uart0_tx_drv_pads[]		= { UART0_TX };
+
+static unsigned int  uart2_all_drv_pads[]		= { UART2_RX,
+							    UART2_TX,
+							    UART2_RTSB,
+							    UART2_CTSB };
+
+static unsigned int  i2c0_all_drv_pads[]		= { I2C0_SCLK,
+							    I2C0_SDATA };
+
+static unsigned int  i2c12_all_drv_pads[]		= { I2C1_SCLK,
+							    I2C1_SDATA,
+							    I2C2_SCLK,
+							    I2C2_SDATA };
+
+static unsigned int  sens0_pclk_drv_pads[]		= { SENSOR0_PCLK };
+
+static unsigned int  sens0_ckout_drv_pads[]		= { SENSOR0_CKOUT };
+
+static unsigned int  uart3_all_drv_pads[]		= { UART3_RX,
+							    UART3_TX,
+							    UART3_RTSB,
+							    UART3_CTSB };
+
+/*****End PADDRV group data****************************/
+
+/* all pinctrl groups of S700 board */
+static const struct owl_pingroup s700_groups[] = {
+	MUX_PG(rgmii_txd23_mfp, 0, 28, 2),
+	MUX_PG(rgmii_rxd2_mfp, 0, 26, 2),
+	MUX_PG(rgmii_rxd3_mfp, 0, 26, 2),
+	MUX_PG(lcd0_d18_mfp, 0, 23, 3),
+	MUX_PG(rgmii_txd01_mfp, 0, 20, 3),
+	MUX_PG(rgmii_txd0_mfp, 0, 16, 3),
+	MUX_PG(rgmii_txd1_mfp, 0, 16, 3),
+	MUX_PG(rgmii_txen_mfp, 0, 13, 3),
+	MUX_PG(rgmii_rxen_mfp, 0, 13, 3),
+	MUX_PG(rgmii_rxd1_mfp, 0, 8, 3),
+	MUX_PG(rgmii_rxd0_mfp, 0, 8, 3),
+	MUX_PG(rgmii_ref_clk_mfp, 0, 6, 2),
+	MUX_PG(i2s_d0_mfp, 0, 5, 1),
+	MUX_PG(i2s_pcm1_mfp, 0, 3, 2),
+	MUX_PG(i2s0_pcm0_mfp, 0, 1, 2),
+	MUX_PG(i2s1_pcm0_mfp, 0, 1, 2),
+	MUX_PG(i2s_d1_mfp, 0, 0, 1),
+	MUX_PG(ks_in2_mfp, 1, 29, 3),
+	MUX_PG(ks_in1_mfp, 1, 29, 3),
+	MUX_PG(ks_in0_mfp, 1, 29, 3),
+	MUX_PG(ks_in3_mfp, 1, 26, 3),
+	MUX_PG(ks_out0_mfp, 1, 26, 3),
+	MUX_PG(ks_out1_mfp, 1, 26, 3),
+	MUX_PG(ks_out2_mfp, 1, 23, 3),
+	MUX_PG(lvds_o_pn_mfp, 1, 21, 2),
+	MUX_PG(dsi_dn0_mfp, 1, 19, 2),
+	MUX_PG(dsi_dp2_mfp, 1, 17, 2),
+	MUX_PG(lcd0_d2_mfp, 1, 14, 3),
+	MUX_PG(dsi_dp3_mfp, 1, 12, 2),
+	MUX_PG(dsi_dn3_mfp, 1, 10, 2),
+	MUX_PG(dsi_dp0_mfp, 1, 7, 3),
+	MUX_PG(lvds_ee_pn_mfp, 1, 5, 2),
+	MUX_PG(uart2_rx_tx_mfp, 1, 3, 2),
+	MUX_PG(spi0_i2c_pcm_mfp, 1, 0, 3),
+	MUX_PG(dsi_dnp1_cp_d2_mfp, 2, 29, 2),
+	MUX_PG(dsi_dnp1_cp_d17_mfp, 2, 29, 2),
+	MUX_PG(lvds_e_pn_mfp, 2, 27, 2),
+	MUX_PG(dsi_dn2_mfp, 2, 24, 3),
+	MUX_PG(uart2_rtsb_mfp, 2, 23, 1),
+	MUX_PG(uart2_ctsb_mfp, 2, 22, 1),
+	MUX_PG(uart3_rtsb_mfp, 2, 21, 1),
+	MUX_PG(uart3_ctsb_mfp, 2, 20, 1),
+	MUX_PG(sd0_d0_mfp, 2, 17, 3),
+	MUX_PG(sd0_d1_mfp, 2, 14, 3),
+	MUX_PG(sd0_d2_d3_mfp, 2, 11, 3),
+	MUX_PG(sd1_d0_d3_mfp, 2, 9, 2),
+	MUX_PG(sd0_cmd_mfp, 2, 7, 2),
+	MUX_PG(sd0_clk_mfp, 2, 5, 2),
+	MUX_PG(sd1_cmd_mfp, 2, 3, 2),
+	MUX_PG(uart0_rx_mfp, 2, 0, 3),
+	MUX_PG(clko_25m_mfp, 3, 30, 1),
+	MUX_PG(csi_cn_cp_mfp, 3, 28, 2),
+	MUX_PG(sens0_ckout_mfp, 3, 22, 2),
+	MUX_PG(uart0_tx_mfp, 3, 19, 3),
+	MUX_PG(i2c0_mfp, 3, 16, 3),
+	MUX_PG(csi_dn_dp_mfp, 3, 14, 2),
+	MUX_PG(sen0_pclk_mfp, 3, 12, 2),
+	MUX_PG(pcm1_in_mfp, 3, 10, 2),
+	MUX_PG(pcm1_clk_mfp, 3, 8, 2),
+	MUX_PG(pcm1_sync_mfp, 3, 6, 2),
+	MUX_PG(pcm1_out_mfp, 3, 4, 2),
+	MUX_PG(dnand_data_wr_mfp, 3, 3, 1),
+	MUX_PG(dnand_acle_ce0_mfp, 3, 2, 1),
+	MUX_PG(nand_ceb2_mfp, 3, 0, 2),
+	MUX_PG(nand_ceb3_mfp, 3, 0, 2),
+
+	DRV_PG(sirq_drv, 0, 28, 2),
+	DRV_PG(rgmii_txd23_drv, 0, 26, 2),
+	DRV_PG(rgmii_rxd23_drv, 0, 24, 2),
+	DRV_PG(rgmii_txd01_txen_drv, 0, 22, 2),
+	DRV_PG(rgmii_rxer_drv, 0, 20, 2),
+	DRV_PG(rgmii_crs_drv, 0, 18, 2),
+	DRV_PG(rgmii_rxd10_drv, 0, 16, 2),
+	DRV_PG(rgmii_ref_clk_drv, 0, 14, 2),
+	DRV_PG(smi_mdc_mdio_drv, 0, 12, 2),
+	DRV_PG(i2s_d0_drv, 0, 10, 2),
+	DRV_PG(i2s_bclk0_drv, 0, 8, 2),
+	DRV_PG(i2s3_drv, 0, 6, 2),
+	DRV_PG(i2s13_drv, 0, 4, 2),
+	DRV_PG(pcm1_drv, 0, 2, 2),
+	DRV_PG(ks_in_drv, 0, 0, 2),
+	DRV_PG(ks_out_drv, 1, 30, 2),
+	DRV_PG(lvds_all_drv, 1, 28, 2),
+	DRV_PG(lcd_d18_d2_drv, 1, 26, 2),
+	DRV_PG(dsi_all_drv, 1, 24, 2),
+	DRV_PG(sd0_d0_d3_drv, 1, 22, 2),
+	DRV_PG(sd0_cmd_drv, 1, 18, 2),
+	DRV_PG(sd0_clk_drv, 1, 16, 2),
+	DRV_PG(spi0_all_drv, 1, 10, 2),
+	DRV_PG(uart0_rx_drv, 2, 30, 2),
+	DRV_PG(uart0_tx_drv, 2, 28, 2),
+	DRV_PG(uart2_all_drv, 2, 26, 2),
+	DRV_PG(i2c0_all_drv, 2, 23, 2),
+	DRV_PG(i2c12_all_drv, 2, 21, 2),
+	DRV_PG(sens0_pclk_drv, 2, 18, 2),
+	DRV_PG(sens0_ckout_drv, 2, 12, 2),
+	DRV_PG(uart3_all_drv, 2, 2, 2),
+};
+
+static const char * const nor_groups[] = {
+	"lcd0_d18",
+	"i2s_d0",
+	"i2s0_pcm0",
+	"i2s1_pcm0",
+	"i2s_d1",
+	"ks_in2",
+	"ks_in1",
+	"ks_in0",
+	"ks_in3",
+	"ks_out0",
+	"ks_out1",
+	"ks_out2",
+	"lcd0_d2",
+	"lvds_ee_pn",
+	"uart2_rx_tx",
+	"spi0_i2c_pcm",
+	"lvds_e_pn",
+	"sd0_d0",
+	"sd0_d1",
+	"sd0_d2_d3",
+	"sd1_d0_d3",
+	"sd0_cmd",
+	"sd1_cmd",
+	"sens0_ckout",
+	"sen0_pclk",
+};
+
+static const char * const eth_rmii_groups[] = {
+	"rgmii_txd23",
+	"rgmii_rxd2",
+	"rgmii_rxd3",
+	"rgmii_txd01",
+	"rgmii_txd0",
+	"rgmii_txd1",
+	"rgmii_txen",
+	"rgmii_rxen",
+	"rgmii_rxd1",
+	"rgmii_rxd0",
+	"rgmii_ref_clk",
+	"eth_smi_dummy",
+};
+
+static const char * const eth_smii_groups[] = {
+	"rgmii_txd0",
+	"rgmii_txd1",
+	"rgmii_rxd0",
+	"rgmii_rxd1",
+	"rgmii_ref_clk",
+	"eth_smi_dummy",
+};
+
+static const char * const spi0_groups[] = {
+	"dsi_dn0",
+	"dsi_dp2",
+	"dsi_dp0",
+	"uart2_rx_tx",
+	"spi0_i2c_pcm",
+	"dsi_dn2",
+
+};
+
+static const char * const spi1_groups[] = {
+	"uart0_rx",
+	"uart0_tx",
+	"i2c0_mfp",
+};
+
+static const char * const spi2_groups[] = {
+	"rgmii_txd01",
+	"rgmii_txd0",
+	"rgmii_txd1",
+	"rgmii_ref_clk",
+	"dnand_acle_ce0",
+};
+
+static const char * const spi3_groups[] = {
+	"rgmii_txen",
+	"rgmii_rxen",
+	"rgmii_rxd1",
+	"rgmii_rxd0",
+};
+
+static const char * const sens0_groups[] = {
+	"csi_cn_cp",
+	"sens0_ckout",
+	"csi_dn_dp",
+	"sen0_pclk",
+};
+
+static const char * const sens1_groups[] = {
+	"lcd0_d18",
+	"ks_in2",
+	"ks_in1",
+	"ks_in0",
+	"ks_in3",
+	"ks_out0",
+	"ks_out1",
+	"ks_out2",
+	"sens0_ckout",
+	"pcm1_in",
+	"pcm1_clk",
+	"pcm1_sync",
+	"pcm1_out",
+};
+
+static const char * const uart0_groups[] = {
+	"uart2_rtsb",
+	"uart2_ctsb",
+	"uart0_rx",
+	"uart0_tx",
+};
+
+static const char * const uart1_groups[] = {
+	"sd0_d2_d3",
+	"i2c0_mfp",
+};
+
+static const char * const uart2_groups[] = {
+	"rgmii_txen",
+	"rgmii_rxen",
+	"rgmii_rxd1",
+	"rgmii_rxd0",
+	"dsi_dn0",
+	"dsi_dp2",
+	"dsi_dp0",
+	"uart2_rx_tx",
+	"dsi_dn2",
+	"uart2_rtsb",
+	"uart2_ctsb",
+	"sd0_d0",
+	"sd0_d1",
+	"sd0_d2_d3",
+	"uart0_rx",
+	"uart0_tx",
+	"i2c0_mfp",
+	"uart2_dummy"
+};
+
+static const char * const uart3_groups[] = {
+	"rgmii_txd23",
+	"rgmii_rxd2",
+	"rgmii_rxd3",
+	"uart3_rtsb",
+	"uart3_ctsb",
+	"uart3_dummy"
+};
+
+static const char * const uart4_groups[] = {
+	"rgmii_txd01",
+	"rgmii_ref_clk",
+	"ks_out0",
+	"ks_out1",
+
+};
+
+static const char * const uart5_groups[] = {
+	"rgmii_rxd1",
+	"rgmii_rxd0",
+	"ks_out0",
+	"ks_out2",
+	"uart3_rtsb",
+	"uart3_ctsb",
+	"sd0_d0",
+	"sd0_d1",
+};
+
+static const char * const uart6_groups[] = {
+	"rgmii_txd0",
+	"rgmii_txd1",
+
+};
+
+static const char * const i2s0_groups[] = {
+	"i2s_d0",
+	"i2s_pcm1",
+	"i2s0_pcm0",
+};
+
+static const char * const i2s1_groups[] = {
+	"i2s1_pcm0",
+	"i2s_d1",
+	"i2s1_dummy",
+	"spi0_i2c_pcm",
+	"uart0_rx",
+	"uart0_tx",
+};
+
+static const char * const pcm1_groups[] = {
+	"i2s_pcm1",
+	"spi0_i2c_pcm",
+	"uart0_rx",
+	"uart0_tx",
+	"pcm1_in",
+	"pcm1_clk",
+	"pcm1_sync",
+	"pcm1_out",
+};
+
+static const char * const pcm0_groups[] = {
+	"i2s0_pcm0",
+	"i2s1_pcm0",
+	"uart2_rx_tx",
+	"spi0_i2c_pcm",
+};
+
+static const char * const ks_groups[] = {
+	"ks_in2",
+	"ks_in1",
+	"ks_in0",
+	"ks_in3",
+	"ks_out0",
+	"ks_out1",
+	"ks_out2",
+};
+
+static const char * const jtag_groups[] = {
+	"ks_in2",
+	"ks_in1",
+	"ks_in0",
+	"ks_in3",
+	"ks_out1",
+	"sd0_d0",
+	"sd0_d2_d3",
+	"sd0_cmd",
+	"sd0_clk",
+};
+
+static const char * const pwm0_groups[] = {
+	"rgmii_rxd2",
+	"rgmii_txen",
+	"ks_in2",
+
+	"sen0_pclk",
+};
+
+static const char * const pwm1_groups[] = {
+	"rgmii_rxen",
+	"ks_in1",
+	"ks_in3",
+	"sens0_ckout",
+};
+
+static const char * const pwm2_groups[] = {
+	"lcd0_d18",
+	"rgmii_rxd3",
+	"rgmii_rxd1",
+	"ks_out0",
+	"ks_out2",
+};
+
+static const char * const pwm3_groups[] = {
+	"rgmii_rxd0",
+	"ks_out1",
+	"lcd0_d2",
+};
+
+static const char * const pwm4_groups[] = {
+	"lcd0_d18",
+	"rgmii_txd01",
+	"rgmii_txd0",
+	"ks_in0",
+	"pcm1_in",
+	"nand_ceb3",
+};
+
+static const char * const pwm5_groups[] = {
+	"rgmii_txd1",
+	"ks_in1",
+	"pcm1_clk",
+	"nand_ceb2",
+};
+
+static const char * const p0_groups[] = {
+	"ks_in2",
+	"ks_in0",
+};
+
+static const char * const sd0_groups[] = {
+	"ks_out0",
+	"ks_out1",
+	"ks_out2",
+	"lcd0_d2",
+	"dsi_dp3",
+	"dsi_dp0",
+	"sd0_d0",
+	"sd0_d1",
+	"sd0_d2_d3",
+	"sd1_d0_d3",
+	"sd0_cmd",
+	"sd0_clk",
+};
+
+static const char * const sd1_groups[] = {
+	"dsi_dp2",
+	"mfp1_16_14",
+	"lcd0_d2",
+	"mfp1_16_14_d17",
+	"dsi_dp3",
+	"dsi_dn3",
+	"dsi_dnp1_cp_d2",
+	"dsi_dnp1_cp_d17",
+	"dsi_dn2",
+	"sd1_d0_d3",
+	"sd1_cmd",
+	"sd1_dummy",
+};
+
+static const char * const sd2_groups[] = {
+	"dnand_data_wr",
+};
+
+static const char * const i2c0_groups[] = {
+	"uart0_rx",
+	"uart0_tx",
+	"i2c0_mfp",
+};
+
+static const char * const i2c1_groups[] = {
+	"i2c0_mfp",
+	"i2c1_dummy"
+};
+
+static const char * const i2c2_groups[] = {
+	"i2c2_dummy"
+};
+
+static const char * const i2c3_groups[] = {
+	"uart2_rx_tx",
+	"pcm1_sync",
+	"pcm1_out",
+};
+
+static const char * const lvds_groups[] = {
+	"lvds_o_pn",
+	"lvds_ee_pn",
+	"lvds_e_pn",
+};
+
+static const char * const bt_groups[] = {
+	"i2s_pcm1",
+	"i2s0_pcm0",
+	"i2s1_pcm0",
+	"ks_in2",
+	"ks_in1",
+	"ks_in0",
+	"ks_in3",
+	"ks_out0",
+	"ks_out1",
+	"ks_out2",
+	"lvds_o_pn",
+	"lvds_ee_pn",
+	"pcm1_in",
+	"pcm1_clk",
+	"pcm1_sync",
+	"pcm1_out",
+};
+
+static const char * const lcd0_groups[] = {
+	"lcd0_d18",
+	"lcd0_d2",
+	"mfp1_16_14_d17",
+	"lvds_o_pn",
+	"dsi_dp3",
+	"dsi_dn3",
+	"lvds_ee_pn",
+	"dsi_dnp1_cp_d2",
+	"dsi_dnp1_cp_d17",
+	"lvds_e_pn",
+};
+
+
+static const char * const usb30_groups[] = {
+	"ks_in1",
+};
+
+static const char * const clko_25m_groups[] = {
+	"clko_25m",
+};
+
+static const char * const mipi_csi_groups[] = {
+	"csi_cn_cp",
+	"csi_dn_dp",
+};
+
+static const char * const dsi_groups[] = {
+	"dsi_dn0",
+	"dsi_dp2",
+	"dsi_dp3",
+	"dsi_dn3",
+	"dsi_dp0",
+	"dsi_dnp1_cp_d2",
+	"dsi_dnp1_cp_d17",
+	"dsi_dn2",
+	"dsi_dummy",
+};
+
+static const char * const nand_groups[] = {
+	"dnand_data_wr",
+	"dnand_acle_ce0",
+	"nand_ceb2",
+	"nand_ceb3",
+	"nand_dummy",
+};
+
+static const char * const spdif_groups[] = {
+	"uart0_tx",
+};
+
+
+static const char * const sirq0_groups[] = {
+	"sirq0_dummy",
+};
+
+static const char * const sirq1_groups[] = {
+	"sirq1_dummy",
+};
+
+static const char * const sirq2_groups[] = {
+	"sirq2_dummy",
+};
+
+static const struct owl_pinmux_func s700_functions[] = {
+	[S700_MUX_NOR] = FUNCTION(nor),
+	[S700_MUX_ETH_RGMII] = FUNCTION(eth_rmii),
+	[S700_MUX_ETH_SGMII] = FUNCTION(eth_smii),
+	[S700_MUX_SPI0] = FUNCTION(spi0),
+	[S700_MUX_SPI1] = FUNCTION(spi1),
+	[S700_MUX_SPI2] = FUNCTION(spi2),
+	[S700_MUX_SPI3] = FUNCTION(spi3),
+	[S700_MUX_SENS0] = FUNCTION(sens0),
+	[S700_MUX_SENS1] = FUNCTION(sens1),
+	[S700_MUX_UART0] = FUNCTION(uart0),
+	[S700_MUX_UART1] = FUNCTION(uart1),
+	[S700_MUX_UART2] = FUNCTION(uart2),
+	[S700_MUX_UART3] = FUNCTION(uart3),
+	[S700_MUX_UART4] = FUNCTION(uart4),
+	[S700_MUX_UART5] = FUNCTION(uart5),
+	[S700_MUX_UART6] = FUNCTION(uart6),
+	[S700_MUX_I2S0] = FUNCTION(i2s0),
+	[S700_MUX_I2S1] = FUNCTION(i2s1),
+	[S700_MUX_PCM1] = FUNCTION(pcm1),
+	[S700_MUX_PCM0] = FUNCTION(pcm0),
+	[S700_MUX_KS] = FUNCTION(ks),
+	[S700_MUX_JTAG] = FUNCTION(jtag),
+	[S700_MUX_PWM0] = FUNCTION(pwm0),
+	[S700_MUX_PWM1] = FUNCTION(pwm1),
+	[S700_MUX_PWM2] = FUNCTION(pwm2),
+	[S700_MUX_PWM3] = FUNCTION(pwm3),
+	[S700_MUX_PWM4] = FUNCTION(pwm4),
+	[S700_MUX_PWM5] = FUNCTION(pwm5),
+	[S700_MUX_P0] = FUNCTION(p0),
+	[S700_MUX_SD0] = FUNCTION(sd0),
+	[S700_MUX_SD1] = FUNCTION(sd1),
+	[S700_MUX_SD2] = FUNCTION(sd2),
+	[S700_MUX_I2C0] = FUNCTION(i2c0),
+	[S700_MUX_I2C1] = FUNCTION(i2c1),
+	[S700_MUX_I2C2] = FUNCTION(i2c2),
+	[S700_MUX_I2C3] = FUNCTION(i2c3),
+	[S700_MUX_DSI] = FUNCTION(dsi),
+	[S700_MUX_LVDS] = FUNCTION(lvds),
+	[S700_MUX_USB30] = FUNCTION(usb30),
+	[S700_MUX_CLKO_25M] = FUNCTION(clko_25m),
+	[S700_MUX_MIPI_CSI] = FUNCTION(mipi_csi),
+	[S700_MUX_DSI] = FUNCTION(dsi),
+	[S700_MUX_NAND] = FUNCTION(nand),
+	[S700_MUX_SPDIF] = FUNCTION(spdif),
+	[S700_MUX_SIRQ0] = FUNCTION(sirq0),
+	[S700_MUX_SIRQ1] = FUNCTION(sirq1),
+	[S700_MUX_SIRQ2] = FUNCTION(sirq2),
+	[S700_MUX_BT] = FUNCTION(bt),
+	[S700_MUX_LCD0] = FUNCTION(lcd0),
+};
+
+/*PAD_ST0*/
+static PAD_ST_CONF(UART2_TX, 0, 31, 1);
+static PAD_ST_CONF(I2C0_SDATA, 0, 30, 1);
+static PAD_ST_CONF(UART0_RX, 0, 29, 1);
+static PAD_ST_CONF(I2S_MCLK1, 0, 23, 1);
+static PAD_ST_CONF(ETH_REF_CLK, 0, 22, 1);
+static PAD_ST_CONF(ETH_TXEN, 0, 21, 1);
+static PAD_ST_CONF(ETH_TXD0, 0, 20, 1);
+static PAD_ST_CONF(I2S_LRCLK1, 0, 19, 1);
+static PAD_ST_CONF(DSI_DP0, 0, 16, 1);
+static PAD_ST_CONF(DSI_DN0, 0, 15, 1);
+static PAD_ST_CONF(UART0_TX, 0, 14, 1);
+static PAD_ST_CONF(SD0_CLK, 0, 12, 1);
+static PAD_ST_CONF(KS_IN0, 0, 11, 1);
+static PAD_ST_CONF(SENSOR0_PCLK, 0, 9, 1);
+static PAD_ST_CONF(I2C0_SCLK, 0, 7, 1);
+static PAD_ST_CONF(KS_OUT0, 0, 6, 1);
+static PAD_ST_CONF(KS_OUT1, 0, 5, 1);
+static PAD_ST_CONF(KS_OUT2, 0, 4, 1);
+static PAD_ST_CONF(ETH_TXD3, 0, 3, 1);
+static PAD_ST_CONF(ETH_TXD2, 0, 2, 1);
+
+/*PAD_ST1*/
+static PAD_ST_CONF(DSI_DP2, 1, 31, 1);
+static PAD_ST_CONF(DSI_DN2, 1, 30, 1);
+static PAD_ST_CONF(I2S_LRCLK0, 1, 29, 1);
+static PAD_ST_CONF(UART3_CTSB, 1, 27, 1);
+static PAD_ST_CONF(UART3_RTSB, 1, 26, 1);
+static PAD_ST_CONF(UART3_RX, 1, 25, 1);
+static PAD_ST_CONF(UART2_RTSB, 1, 24, 1);
+static PAD_ST_CONF(UART2_CTSB, 1, 23, 1);
+static PAD_ST_CONF(UART2_RX, 1, 22, 1);
+static PAD_ST_CONF(ETH_RXD0, 1, 21, 1);
+static PAD_ST_CONF(ETH_RXD1, 1, 20, 1);
+static PAD_ST_CONF(ETH_CRS_DV, 1, 19, 1);
+static PAD_ST_CONF(ETH_RXER, 1, 18, 1);
+static PAD_ST_CONF(ETH_TXD1, 1, 17, 1);
+static PAD_ST_CONF(LVDS_OAP, 1, 12, 1);
+static PAD_ST_CONF(PCM1_CLK, 1, 11, 1);
+static PAD_ST_CONF(PCM1_IN, 1, 10, 1);
+static PAD_ST_CONF(PCM1_SYNC, 1, 9, 1);
+static PAD_ST_CONF(I2C1_SCLK, 1, 8, 1);
+static PAD_ST_CONF(I2C1_SDATA, 1, 7, 1);
+static PAD_ST_CONF(I2C2_SCLK, 1, 6, 1);
+static PAD_ST_CONF(I2C2_SDATA, 1, 5, 1);
+
+static PAD_ST_CONF(SPI0_MISO, 1, 3, 1);
+static PAD_ST_CONF(SPI0_SS, 1, 2, 1);
+static PAD_ST_CONF(I2S_BCLK0, 1, 1, 1);
+static PAD_ST_CONF(I2S_MCLK0, 1, 0, 1);
+
+/******PAD PULL UP/DOWN CONFIGURES*************************/
+/*PAD_PULLCTL0*/
+static PAD_PULLCTL_CONF(PCM1_SYNC, 0, 30, 1);
+static PAD_PULLCTL_CONF(PCM1_OUT, 0, 29, 1);
+static PAD_PULLCTL_CONF(KS_OUT2, 0, 28, 1);
+static PAD_PULLCTL_CONF(LCD0_D2, 0, 27, 1);
+static PAD_PULLCTL_CONF(DSI_DN3, 0, 26, 1);
+static PAD_PULLCTL_CONF(ETH_RXER, 0, 16, 1);
+static PAD_PULLCTL_CONF(SIRQ0, 0, 14, 2);
+static PAD_PULLCTL_CONF(SIRQ1, 0, 12, 2);
+static PAD_PULLCTL_CONF(SIRQ2, 0, 10, 2);
+static PAD_PULLCTL_CONF(I2C0_SDATA, 0, 9, 1);
+static PAD_PULLCTL_CONF(I2C0_SCLK, 0, 8, 1);
+static PAD_PULLCTL_CONF(KS_IN0, 0, 7, 1);
+static PAD_PULLCTL_CONF(KS_IN1, 0, 6, 1);
+static PAD_PULLCTL_CONF(KS_IN2, 0, 5, 1);
+static PAD_PULLCTL_CONF(KS_IN3, 0, 4, 1);
+static PAD_PULLCTL_CONF(KS_OUT0, 0, 2, 1);
+static PAD_PULLCTL_CONF(KS_OUT1, 0, 1, 1);
+static PAD_PULLCTL_CONF(DSI_DP1, 0, 0, 1);
+
+/*PAD_PULLCTL1*/
+static PAD_PULLCTL_CONF(SD0_D0, 1, 17, 1);
+static PAD_PULLCTL_CONF(SD0_D1, 1, 16, 1);
+static PAD_PULLCTL_CONF(SD0_D2, 1, 15, 1);
+static PAD_PULLCTL_CONF(SD0_D3, 1, 14, 1);
+static PAD_PULLCTL_CONF(SD0_CMD, 1, 13, 1);
+static PAD_PULLCTL_CONF(SD0_CLK, 1, 12, 1);
+static PAD_PULLCTL_CONF(UART0_RX, 1, 2, 1);
+static PAD_PULLCTL_CONF(UART0_TX, 1, 1, 1);
+static PAD_PULLCTL_CONF(CLKO_25M, 1, 0, 1);
+
+/*PAD_PULLCTL2*/
+static PAD_PULLCTL_CONF(ETH_TXD2, 2, 18, 1);
+static PAD_PULLCTL_CONF(ETH_TXD3, 2, 17, 1);
+static PAD_PULLCTL_CONF(SPI0_SS, 2, 16, 1);
+static PAD_PULLCTL_CONF(SPI0_MISO, 2, 15, 1);
+static PAD_PULLCTL_CONF(I2C1_SDATA, 2, 10, 1);
+static PAD_PULLCTL_CONF(I2C1_SCLK, 2, 9, 1);
+static PAD_PULLCTL_CONF(I2C2_SDATA, 2, 8, 1);
+static PAD_PULLCTL_CONF(I2C2_SCLK, 2, 7, 1);
+
+/********PAD INFOS*****************************/
+
+/* Pad info table for the pinmux subsystem */
+static struct owl_padinfo s700_padinfo[NUM_PADS] = {
+	[ETH_TXD0] = PAD_INFO_ST(ETH_TXD0),
+	[ETH_TXD1] = PAD_INFO_ST(ETH_TXD1),
+	[ETH_TXEN] = PAD_INFO_ST(ETH_TXEN),
+	[ETH_RXER] = PAD_INFO_PULLCTL_ST(ETH_RXER),
+	[ETH_CRS_DV] = PAD_INFO_ST(ETH_CRS_DV),
+	[ETH_RXD1] = PAD_INFO_ST(ETH_RXD1),
+	[ETH_RXD0] = PAD_INFO_ST(ETH_RXD0),
+	[ETH_REF_CLK] = PAD_INFO_ST(ETH_REF_CLK),
+	[ETH_MDC] = PAD_INFO(ETH_MDC),
+	[ETH_MDIO] = PAD_INFO(ETH_MDIO),
+	[SIRQ0] = PAD_INFO_PULLCTL(SIRQ0),
+	[SIRQ1] = PAD_INFO_PULLCTL(SIRQ1),
+	[SIRQ2] = PAD_INFO_PULLCTL(SIRQ2),
+	[I2S_D0] = PAD_INFO(I2S_D0),
+	[I2S_BCLK0] = PAD_INFO_ST(I2S_BCLK0),
+	[I2S_LRCLK0] = PAD_INFO_ST(I2S_LRCLK0),
+	[I2S_MCLK0] = PAD_INFO_ST(I2S_MCLK0),
+	[I2S_D1] = PAD_INFO(I2S_D1),
+	[I2S_BCLK1] = PAD_INFO(I2S_BCLK1),
+	[I2S_LRCLK1] = PAD_INFO_ST(I2S_LRCLK1),
+	[I2S_MCLK1] = PAD_INFO_ST(I2S_MCLK1),
+	[KS_IN0] = PAD_INFO_PULLCTL_ST(KS_IN0),
+	[KS_IN1] = PAD_INFO_PULLCTL(KS_IN1),
+	[KS_IN2] = PAD_INFO_PULLCTL(KS_IN2),
+	[KS_IN3] = PAD_INFO_PULLCTL(KS_IN3),
+	[KS_OUT0] = PAD_INFO_PULLCTL_ST(KS_OUT0),
+	[KS_OUT1] = PAD_INFO_PULLCTL_ST(KS_OUT1),
+	[KS_OUT2] = PAD_INFO_PULLCTL_ST(KS_OUT2),
+	[LVDS_OEP] = PAD_INFO(LVDS_OEP),
+	[LVDS_OEN] = PAD_INFO(LVDS_OEN),
+	[LVDS_ODP] = PAD_INFO(LVDS_ODP),
+	[LVDS_ODN] = PAD_INFO(LVDS_ODN),
+	[LVDS_OCP] = PAD_INFO(LVDS_OCP),
+	[LVDS_OCN] = PAD_INFO(LVDS_OCN),
+	[LVDS_OBP] = PAD_INFO(LVDS_OBP),
+	[LVDS_OBN] = PAD_INFO(LVDS_OBN),
+	[LVDS_OAP] = PAD_INFO_ST(LVDS_OAP),
+	[LVDS_OAN] = PAD_INFO(LVDS_OAN),
+	[LVDS_EEP] = PAD_INFO(LVDS_EEP),
+	[LVDS_EEN] = PAD_INFO(LVDS_EEN),
+	[LVDS_EDP] = PAD_INFO(LVDS_EDP),
+	[LVDS_EDN] = PAD_INFO(LVDS_EDN),
+	[LVDS_ECP] = PAD_INFO(LVDS_ECP),
+	[LVDS_ECN] = PAD_INFO(LVDS_ECN),
+	[LVDS_EBP] = PAD_INFO(LVDS_EBP),
+	[LVDS_EBN] = PAD_INFO(LVDS_EBN),
+	[LVDS_EAP] = PAD_INFO(LVDS_EAP),
+	[LVDS_EAN] = PAD_INFO(LVDS_EAN),
+	[LCD0_D18] = PAD_INFO(LCD0_D18),
+	[LCD0_D2] = PAD_INFO_PULLCTL(LCD0_D2),
+	[DSI_DP3] = PAD_INFO(DSI_DP3),
+	[DSI_DN3] = PAD_INFO_PULLCTL(DSI_DN3),
+	[DSI_DP1] = PAD_INFO_PULLCTL(DSI_DP1),
+	[DSI_DN1] = PAD_INFO(DSI_DN1),
+	[DSI_DP0] = PAD_INFO_ST(DSI_DP0),
+	[DSI_DN0] = PAD_INFO_ST(DSI_DN0),
+	[DSI_DP2] = PAD_INFO_ST(DSI_DP2),
+	[DSI_DN2] = PAD_INFO_ST(DSI_DN2),
+	[SD0_D0] = PAD_INFO_PULLCTL(SD0_D0),
+	[SD0_D1] = PAD_INFO_PULLCTL(SD0_D1),
+	[SD0_D2] = PAD_INFO_PULLCTL(SD0_D2),
+	[SD0_D3] = PAD_INFO_PULLCTL(SD0_D3),
+	[SD0_CMD] = PAD_INFO_PULLCTL(SD0_CMD),
+	[SD0_CLK] = PAD_INFO_PULLCTL_ST(SD0_CLK),
+	[SD1_CLK] = PAD_INFO(SD1_CLK),
+	[SPI0_SS] = PAD_INFO_PULLCTL_ST(SPI0_SS),
+	[SPI0_MISO] = PAD_INFO_PULLCTL_ST(SPI0_MISO),
+	[UART0_RX] = PAD_INFO_PULLCTL_ST(UART0_RX),
+	[UART0_TX] = PAD_INFO_PULLCTL_ST(UART0_TX),
+	[I2C0_SCLK] = PAD_INFO_PULLCTL_ST(I2C0_SCLK),
+	[I2C0_SDATA] = PAD_INFO_PULLCTL_ST(I2C0_SDATA),
+	[SENSOR0_PCLK] = PAD_INFO_ST(SENSOR0_PCLK),
+	[SENSOR0_CKOUT] = PAD_INFO(SENSOR0_CKOUT),
+	[DNAND_ALE] = PAD_INFO(DNAND_ALE),
+	[DNAND_CLE] = PAD_INFO(DNAND_CLE),
+	[DNAND_CEB0] = PAD_INFO(DNAND_CEB0),
+	[DNAND_CEB1] = PAD_INFO(DNAND_CEB1),
+	[DNAND_CEB2] = PAD_INFO(DNAND_CEB2),
+	[DNAND_CEB3] = PAD_INFO(DNAND_CEB3),
+	[UART2_RX] = PAD_INFO_ST(UART2_RX),
+	[UART2_TX] = PAD_INFO_ST(UART2_TX),
+	[UART2_RTSB] = PAD_INFO_ST(UART2_RTSB),
+	[UART2_CTSB] = PAD_INFO_ST(UART2_CTSB),
+	[UART3_RX] = PAD_INFO_ST(UART3_RX),
+	[UART3_TX] = PAD_INFO(UART3_TX),
+	[UART3_RTSB] = PAD_INFO_ST(UART3_RTSB),
+	[UART3_CTSB] = PAD_INFO_ST(UART3_CTSB),
+	[PCM1_IN] = PAD_INFO_ST(PCM1_IN),
+	[PCM1_CLK] = PAD_INFO_ST(PCM1_CLK),
+	[PCM1_SYNC] = PAD_INFO_PULLCTL_ST(PCM1_SYNC),
+	[PCM1_OUT] = PAD_INFO_PULLCTL(PCM1_OUT),
+	[I2C1_SCLK] = PAD_INFO_PULLCTL_ST(I2C1_SCLK),
+	[I2C1_SDATA] = PAD_INFO_PULLCTL_ST(I2C1_SDATA),
+	[I2C2_SCLK] = PAD_INFO_PULLCTL_ST(I2C2_SCLK),
+	[I2C2_SDATA] = PAD_INFO_PULLCTL_ST(I2C2_SDATA),
+	[CSI_DN0] = PAD_INFO(CSI_DN0),
+	[CSI_DP0] = PAD_INFO(CSI_DP0),
+	[CSI_DN1] = PAD_INFO(CSI_DN1),
+	[CSI_DP1] = PAD_INFO(CSI_DP1),
+	[CSI_CN] = PAD_INFO(CSI_CN),
+	[CSI_CP] = PAD_INFO(CSI_CP),
+	[CSI_DN2] = PAD_INFO(CSI_DN2),
+	[CSI_DP2] = PAD_INFO(CSI_DP2),
+	[CSI_DN3] = PAD_INFO(CSI_DN3),
+	[CSI_DP3] = PAD_INFO(CSI_DP3),
+	[DNAND_WRB] = PAD_INFO(DNAND_WRB),
+	[DNAND_RDB] = PAD_INFO(DNAND_RDB),
+	[DNAND_RB0] = PAD_INFO(DNAND_RB0),
+	[PORB] = PAD_INFO(PORB),
+	[CLKO_25M] = PAD_INFO_PULLCTL(CLKO_25M),
+	[BSEL] = PAD_INFO(BSEL),
+	[PKG0] = PAD_INFO(PKG0),
+	[PKG1] = PAD_INFO(PKG1),
+	[PKG2] = PAD_INFO(PKG2),
+	[PKG3] = PAD_INFO(PKG3),
+	[ETH_TXD2] = PAD_INFO_PULLCTL_ST(ETH_TXD2),
+	[ETH_TXD3] = PAD_INFO_PULLCTL_ST(ETH_TXD3),
+};
+
+static const struct owl_gpio_port s700_gpio_ports[] = {
+	OWL_GPIO_PORT(A, 0x0000, 32, 0x0, 0x4, 0x8, 0x204, 0x208, 0x20C, 0x230, 0),
+	OWL_GPIO_PORT(B, 0x000C, 32, 0x0, 0x4, 0x8, 0x204, 0x210, 0x214, 0x238, 1),
+	OWL_GPIO_PORT(C, 0x0018, 32, 0x0, 0x4, 0x8, 0x204, 0x218, 0x21C, 0x240, 2),
+	OWL_GPIO_PORT(D, 0x0024, 32, 0x0, 0x4, 0x8, 0x204, 0x220, 0x224, 0x248, 3),
+	/* 0x24C (INTC_GPIOD_TYPE1) used to tweak the driver to handle generic */
+	OWL_GPIO_PORT(E, 0x0030, 8, 0x0, 0x4, 0x8, 0x204, 0x228, 0x22C, 0x24C, 4),
+};
+
+enum owl_pinconf_pull {
+	OWL_PINCONF_PULL_DOWN,
+	OWL_PINCONF_PULL_UP,
+};
+
+static int s700_pad_pinconf_arg2val(const struct owl_padinfo *info,
+				unsigned int param,
+				u32 *arg)
+{
+	switch (param) {
+	case PIN_CONFIG_BIAS_PULL_DOWN:
+		*arg = OWL_PINCONF_PULL_DOWN;
+		break;
+	case PIN_CONFIG_BIAS_PULL_UP:
+		*arg = OWL_PINCONF_PULL_UP;
+		break;
+	case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
+		*arg = (*arg >= 1 ? 1 : 0);
+		break;
+	default:
+		return -ENOTSUPP;
+	}
+
+	return 0;
+}
+
+static int s700_pad_pinconf_val2arg(const struct owl_padinfo *padinfo,
+				unsigned int param,
+				u32 *arg)
+{
+	switch (param) {
+	case PIN_CONFIG_BIAS_PULL_DOWN:
+		*arg = *arg == OWL_PINCONF_PULL_DOWN;
+		break;
+	case PIN_CONFIG_BIAS_PULL_UP:
+		*arg = *arg == OWL_PINCONF_PULL_UP;
+		break;
+	case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
+		*arg = *arg == 1;
+		break;
+	default:
+		return -ENOTSUPP;
+	}
+
+	return 0;
+}
+
+static struct owl_pinctrl_soc_data s700_pinctrl_data = {
+	.padinfo = s700_padinfo,
+	.pins = (const struct pinctrl_pin_desc *)s700_pads,
+	.npins = ARRAY_SIZE(s700_pads),
+	.functions = s700_functions,
+	.nfunctions = ARRAY_SIZE(s700_functions),
+	.groups = s700_groups,
+	.ngroups = ARRAY_SIZE(s700_groups),
+	.ngpios = NUM_GPIOS,
+	.ports = s700_gpio_ports,
+	.nports = ARRAY_SIZE(s700_gpio_ports),
+	.padctl_arg2val = s700_pad_pinconf_arg2val,
+	.padctl_val2arg = s700_pad_pinconf_val2arg,
+};
+
+static int s700_pinctrl_probe(struct platform_device *pdev)
+{
+	pr_info("[OWL] pinctrl s700 probe\n");
+	return owl_pinctrl_probe(pdev, &s700_pinctrl_data);
+}
+
+static const struct of_device_id s700_pinctrl_of_match[] = {
+	{ .compatible = "actions,s700-pinctrl", },
+	{}
+};
+
+static struct platform_driver s700_pinctrl_driver = {
+	.probe = s700_pinctrl_probe,
+	.driver = {
+		.name = "pinctrl-s700",
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(s700_pinctrl_of_match),
+	},
+};
+
+static int __init s700_pinctrl_init(void)
+{
+	return platform_driver_register(&s700_pinctrl_driver);
+}
+arch_initcall(s700_pinctrl_init);
+
+static void __exit s700_pinctrl_exit(void)
+{
+	platform_driver_unregister(&s700_pinctrl_driver);
+}
+module_exit(s700_pinctrl_exit);
+
+MODULE_AUTHOR("Actions Semi Inc.");
+MODULE_DESCRIPTION("Actions Semi S700 Soc Pinctrl Driver");
+MODULE_LICENSE("GPL");
-- 
2.18.0

[PATCH v4 5/5] arm64: dts: actions: Add pinctrl node for Actions Semi S700

[Saravanan Sekar]

Add pinctrl nodes for Actions Semi S700 SoC

Signed-off-by: Parthiban Nallathambi <pn@denx.de>
Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
---
 arch/arm64/boot/dts/actions/s700.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/actions/s700.dtsi b/arch/arm64/boot/dts/actions/s700.dtsi
index 59d29e4ca404..9a2c617703e5 100644
--- a/arch/arm64/boot/dts/actions/s700.dtsi
+++ b/arch/arm64/boot/dts/actions/s700.dtsi
@@ -179,5 +179,21 @@
 			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "timer1";
 		};
+
+		pinctrl: pinctrl@e01b0000 {
+			compatible = "actions,s700-pinctrl";
+			reg = <0x0 0xe01b0000 0x0 0x1000>;
+			clocks = <&cmu CLK_GPIO>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 0 136>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+		};
 	};
 };
-- 
2.18.0

Re: [PATCH v4 5/5] arm64: dts: actions: Add pinctrl node for Actions Semi S700

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 1183 bytes --]

Hi Saravanan,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on pinctrl/devel]
[also build test ERROR on next-20180731]
[cannot apply to v4.18-rc7]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Saravanan-Sekar/pinctrl-actions-define-constructor-generic-to-Actions-Semi-SoC-s/20180801-042834
base:   https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git devel
config: arm64-defconfig (attached as .config)
compiler: aarch64-linux-gnu-gcc (Debian 7.2.0-11) 7.2.0
reproduce:
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        GCC_VERSION=7.2.0 make.cross ARCH=arm64 

All errors (new ones prefixed by >>):

>> Error: arch/arm64/boot/dts/actions/s700.dtsi:172.19-20 syntax error
>> FATAL ERROR: Unable to parse input tree

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 38876 bytes --]

Re: [PATCH v4 5/5] arm64: dts: actions: Add pinctrl node for Actions Semi S700

[Parthiban Nallathambi]

Hi All,

On 08/01/2018 02:45 AM, kbuild test robot wrote:
> Hi Saravanan,
> 
> Thank you for the patch! Yet something to improve:
> 
> [auto build test ERROR on pinctrl/devel]
> [also build test ERROR on next-20180731]
> [cannot apply to v4.18-rc7]
> [if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
> 
> url:    https://github.com/0day-ci/linux/commits/Saravanan-Sekar/pinctrl-actions-define-constructor-generic-to-Actions-Semi-SoC-s/20180801-042834
> base:   https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git devel
> config: arm64-defconfig (attached as .config)
> compiler: aarch64-linux-gnu-gcc (Debian 7.2.0-11) 7.2.0
> reproduce:
>          wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
>          chmod +x ~/bin/make.cross
>          # save the attached .config to linux build tree
>          GCC_VERSION=7.2.0 make.cross ARCH=arm64
> 
> All errors (new ones prefixed by >>):
> 
>>> Error: arch/arm64/boot/dts/actions/s700.dtsi:172.19-20 syntax error
>>> FATAL ERROR: Unable to parse input tree

Device tree entry in this patch depends on actions clock patch [1],
and it is not yet merged. The above build error is because of the
dependency.

[1] https://patchwork.kernel.org/patch/10533959/

> 
> ---
> 0-DAY kernel test infrastructure                Open Source Technology Center
> https://lists.01.org/pipermail/kbuild-all                   Intel Corporation
> 

-- 
Thanks,
Parthiban Nallathambi

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de

Re: [PATCH v4 0/5] Add Actions Semi S700 pinctrl support

[Linus Walleij]

On Tue, Jul 31, 2018 at 9:48 PM Saravanan Sekar <sravanhome@gmail.com> wrote:

> This patchset adds pinctrl support for Actions Semi S700 SoC.
> Pinmux functions are only accessible for pin groups while pinconf
> parameters are available for both pin groups and individual pins.
>
> pinctrl driver is verified using the Cubieboard7.
>
> common functionalities from s900 is moved for all Actions Semi
> SoC's usage.
> Common pad control configurations are moved to SoC specific
>
> dts entry for pinctrl depends on clock driver which is still under review:
> https://patchwork.kernel.org/patch/10533959/

So what is the status of this patch set?

I am happy to apply it once you have the right buildtime dependencies
and Manivannan's ACK on the patch set! (Looks good to me.)

Maybe you want to rebase on v4.19-rc1 and resend as v5 before
I do that though?

Yours,
Linus Walleij

Re: [PATCH v4 0/5] Add Actions Semi S700 pinctrl support

[Manivannan Sadhasivam]

On Wed, Aug 29, 2018 at 09:35:38AM +0200, Linus Walleij wrote:
> On Tue, Jul 31, 2018 at 9:48 PM Saravanan Sekar <sravanhome@gmail.com> wrote:
> 
> > This patchset adds pinctrl support for Actions Semi S700 SoC.
> > Pinmux functions are only accessible for pin groups while pinconf
> > parameters are available for both pin groups and individual pins.
> >
> > pinctrl driver is verified using the Cubieboard7.
> >
> > common functionalities from s900 is moved for all Actions Semi
> > SoC's usage.
> > Common pad control configurations are moved to SoC specific
> >
> > dts entry for pinctrl depends on clock driver which is still under review:
> > https://patchwork.kernel.org/patch/10533959/
> 
> So what is the status of this patch set?
>

Oops. This one slipped through the cracks...

> I am happy to apply it once you have the right buildtime dependencies
> and Manivannan's ACK on the patch set! (Looks good to me.)
> 

Sadly mutt played its part on this patchset and 1,3 patches got
deleted accidentally.

> Maybe you want to rebase on v4.19-rc1 and resend as v5 before
> I do that though?
> 

Parthiban,

Can you please rebase and send the next iteration as Linus said. I'll take a
look.

Sorry for the late reply.

Regards,
Mani

> Yours,
> Linus Walleij

Re: [PATCH v4 0/5] Add Actions Semi S700 pinctrl support

[Parthiban Nallathambi]

Hi Mani,

On 08/29/2018 09:41 AM, Manivannan Sadhasivam wrote:
> On Wed, Aug 29, 2018 at 09:35:38AM +0200, Linus Walleij wrote:
>> On Tue, Jul 31, 2018 at 9:48 PM Saravanan Sekar <sravanhome@gmail.com> wrote:
>>
>>> This patchset adds pinctrl support for Actions Semi S700 SoC.
>>> Pinmux functions are only accessible for pin groups while pinconf
>>> parameters are available for both pin groups and individual pins.
>>>
>>> pinctrl driver is verified using the Cubieboard7.
>>>
>>> common functionalities from s900 is moved for all Actions Semi
>>> SoC's usage.
>>> Common pad control configurations are moved to SoC specific
>>>
>>> dts entry for pinctrl depends on clock driver which is still under review:
>>> https://patchwork.kernel.org/patch/10533959/
>>
>> So what is the status of this patch set?
>>
> 
> Oops. This one slipped through the cracks...
> 
>> I am happy to apply it once you have the right buildtime dependencies
>> and Manivannan's ACK on the patch set! (Looks good to me.)
>>
> 
> Sadly mutt played its part on this patchset and 1,3 patches got
> deleted accidentally.
> 
>> Maybe you want to rebase on v4.19-rc1 and resend as v5 before
>> I do that though?
>>
> 
> Parthiban,
> 
> Can you please rebase and send the next iteration as Linus said. I'll take a
> look.

Sure, will send it today after rebase.

> 
> Sorry for the late reply.
> 
> Regards,
> Mani
> 
>> Yours,
>> Linus Walleij

-- 
Thanks,
Parthiban N