* [PATCH v2 1/5] gpio: 104-dio-48e: Add support for GPIO names
2017-01-30 18:32 [PATCH v2 0/5] gpio: Add support for GPIO names for several ISA_BUS_API drivers William Breathitt Gray
@ 2017-01-30 18:32 ` William Breathitt Gray
2017-02-01 15:03 ` Linus Walleij
2017-01-30 18:33 ` [PATCH v2 2/5] gpio: 104-idi-48: " William Breathitt Gray
` (3 subsequent siblings)
4 siblings, 1 reply; 11+ messages in thread
From: William Breathitt Gray @ 2017-01-30 18:32 UTC (permalink / raw)
To: linus.walleij, gnurou; +Cc: linux-gpio, linux-kernel, William Breathitt Gray
This patch sets the gpio_chip names option with an array of GPIO line
names that match the manual documentation for the ACCES 104-DIO-48E.
This should make it easier for users to identify which GPIO line
corresponds to a respective GPIO pin on the device.
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
---
drivers/gpio/gpio-104-dio-48e.c | 23 ++++++++++++++++++++++-
1 file changed, 22 insertions(+), 1 deletion(-)
diff --git a/drivers/gpio/gpio-104-dio-48e.c b/drivers/gpio/gpio-104-dio-48e.c
index 221243f17d4e..84e529b4f5d8 100644
--- a/drivers/gpio/gpio-104-dio-48e.c
+++ b/drivers/gpio/gpio-104-dio-48e.c
@@ -338,6 +338,26 @@ static irqreturn_t dio48e_irq_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
+#define DIO48E_NGPIO 48
+static const char *dio48e_names[DIO48E_NGPIO] = {
+ "PPI Group 0 Port A 0", "PPI Group 0 Port A 1", "PPI Group 0 Port A 2",
+ "PPI Group 0 Port A 3", "PPI Group 0 Port A 4", "PPI Group 0 Port A 5",
+ "PPI Group 0 Port A 6", "PPI Group 0 Port A 7", "PPI Group 0 Port B 0",
+ "PPI Group 0 Port B 1", "PPI Group 0 Port B 2", "PPI Group 0 Port B 3",
+ "PPI Group 0 Port B 4", "PPI Group 0 Port B 5", "PPI Group 0 Port B 6",
+ "PPI Group 0 Port B 7", "PPI Group 0 Port C 0", "PPI Group 0 Port C 1",
+ "PPI Group 0 Port C 2", "PPI Group 0 Port C 3", "PPI Group 0 Port C 4",
+ "PPI Group 0 Port C 5", "PPI Group 0 Port C 6", "PPI Group 0 Port C 7",
+ "PPI Group 1 Port A 0", "PPI Group 1 Port A 1", "PPI Group 1 Port A 2",
+ "PPI Group 1 Port A 3", "PPI Group 1 Port A 4", "PPI Group 1 Port A 5",
+ "PPI Group 1 Port A 6", "PPI Group 1 Port A 7", "PPI Group 1 Port B 0",
+ "PPI Group 1 Port B 1", "PPI Group 1 Port B 2", "PPI Group 1 Port B 3",
+ "PPI Group 1 Port B 4", "PPI Group 1 Port B 5", "PPI Group 1 Port B 6",
+ "PPI Group 1 Port B 7", "PPI Group 1 Port C 0", "PPI Group 1 Port C 1",
+ "PPI Group 1 Port C 2", "PPI Group 1 Port C 3", "PPI Group 1 Port C 4",
+ "PPI Group 1 Port C 5", "PPI Group 1 Port C 6", "PPI Group 1 Port C 7"
+};
+
static int dio48e_probe(struct device *dev, unsigned int id)
{
struct dio48e_gpio *dio48egpio;
@@ -358,7 +378,8 @@ static int dio48e_probe(struct device *dev, unsigned int id)
dio48egpio->chip.parent = dev;
dio48egpio->chip.owner = THIS_MODULE;
dio48egpio->chip.base = -1;
- dio48egpio->chip.ngpio = 48;
+ dio48egpio->chip.ngpio = DIO48E_NGPIO;
+ dio48egpio->chip.names = dio48e_names;
dio48egpio->chip.get_direction = dio48e_gpio_get_direction;
dio48egpio->chip.direction_input = dio48e_gpio_direction_input;
dio48egpio->chip.direction_output = dio48e_gpio_direction_output;
--
2.11.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* Re: [PATCH v2 1/5] gpio: 104-dio-48e: Add support for GPIO names
2017-01-30 18:32 ` [PATCH v2 1/5] gpio: 104-dio-48e: Add support for GPIO names William Breathitt Gray
@ 2017-02-01 15:03 ` Linus Walleij
0 siblings, 0 replies; 11+ messages in thread
From: Linus Walleij @ 2017-02-01 15:03 UTC (permalink / raw)
To: William Breathitt Gray; +Cc: Alexandre Courbot, linux-gpio, linux-kernel
On Mon, Jan 30, 2017 at 7:32 PM, William Breathitt Gray
<vilhelm.gray@gmail.com> wrote:
> This patch sets the gpio_chip names option with an array of GPIO line
> names that match the manual documentation for the ACCES 104-DIO-48E.
> This should make it easier for users to identify which GPIO line
> corresponds to a respective GPIO pin on the device.
>
> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Patch applied.
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v2 2/5] gpio: 104-idi-48: Add support for GPIO names
2017-01-30 18:32 [PATCH v2 0/5] gpio: Add support for GPIO names for several ISA_BUS_API drivers William Breathitt Gray
2017-01-30 18:32 ` [PATCH v2 1/5] gpio: 104-dio-48e: Add support for GPIO names William Breathitt Gray
@ 2017-01-30 18:33 ` William Breathitt Gray
2017-02-01 15:04 ` Linus Walleij
2017-01-30 18:33 ` [PATCH v2 3/5] gpio: 104-idio-16: " William Breathitt Gray
` (2 subsequent siblings)
4 siblings, 1 reply; 11+ messages in thread
From: William Breathitt Gray @ 2017-01-30 18:33 UTC (permalink / raw)
To: linus.walleij, gnurou; +Cc: linux-gpio, linux-kernel, William Breathitt Gray
This patch sets the gpio_chip names option with an array of GPIO line
names that match the manual documentation for the ACCES 104-IDI-48.
This should make it easier for users to identify which GPIO line
corresponds to a respective GPIO pin on the device.
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
---
drivers/gpio/gpio-104-idi-48.c | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/gpio/gpio-104-idi-48.c b/drivers/gpio/gpio-104-idi-48.c
index eafbf053f3e8..db8bf23e47b8 100644
--- a/drivers/gpio/gpio-104-idi-48.c
+++ b/drivers/gpio/gpio-104-idi-48.c
@@ -217,6 +217,18 @@ static irqreturn_t idi_48_irq_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
+#define IDI48_NGPIO 48
+static const char *idi48_names[IDI48_NGPIO] = {
+ "Bit 0 A", "Bit 1 A", "Bit 2 A", "Bit 3 A", "Bit 4 A", "Bit 5 A",
+ "Bit 6 A", "Bit 7 A", "Bit 8 A", "Bit 9 A", "Bit 10 A", "Bit 11 A",
+ "Bit 12 A", "Bit 13 A", "Bit 14 A", "Bit 15 A", "Bit 16 A", "Bit 17 A",
+ "Bit 18 A", "Bit 19 A", "Bit 20 A", "Bit 21 A", "Bit 22 A", "Bit 23 A",
+ "Bit 0 B", "Bit 1 B", "Bit 2 B", "Bit 3 B", "Bit 4 B", "Bit 5 B",
+ "Bit 6 B", "Bit 7 B", "Bit 8 B", "Bit 9 B", "Bit 10 B", "Bit 11 B",
+ "Bit 12 B", "Bit 13 B", "Bit 14 B", "Bit 15 B", "Bit 16 B", "Bit 17 B",
+ "Bit 18 B", "Bit 19 B", "Bit 20 B", "Bit 21 B", "Bit 22 B", "Bit 23 B"
+};
+
static int idi_48_probe(struct device *dev, unsigned int id)
{
struct idi_48_gpio *idi48gpio;
@@ -237,7 +249,8 @@ static int idi_48_probe(struct device *dev, unsigned int id)
idi48gpio->chip.parent = dev;
idi48gpio->chip.owner = THIS_MODULE;
idi48gpio->chip.base = -1;
- idi48gpio->chip.ngpio = 48;
+ idi48gpio->chip.ngpio = IDI48_NGPIO;
+ idi48gpio->chip.names = idi48_names;
idi48gpio->chip.get_direction = idi_48_gpio_get_direction;
idi48gpio->chip.direction_input = idi_48_gpio_direction_input;
idi48gpio->chip.get = idi_48_gpio_get;
--
2.11.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* Re: [PATCH v2 2/5] gpio: 104-idi-48: Add support for GPIO names
2017-01-30 18:33 ` [PATCH v2 2/5] gpio: 104-idi-48: " William Breathitt Gray
@ 2017-02-01 15:04 ` Linus Walleij
0 siblings, 0 replies; 11+ messages in thread
From: Linus Walleij @ 2017-02-01 15:04 UTC (permalink / raw)
To: William Breathitt Gray; +Cc: Alexandre Courbot, linux-gpio, linux-kernel
On Mon, Jan 30, 2017 at 7:33 PM, William Breathitt Gray
<vilhelm.gray@gmail.com> wrote:
> This patch sets the gpio_chip names option with an array of GPIO line
> names that match the manual documentation for the ACCES 104-IDI-48.
> This should make it easier for users to identify which GPIO line
> corresponds to a respective GPIO pin on the device.
>
> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Patch applied.
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v2 3/5] gpio: 104-idio-16: Add support for GPIO names
2017-01-30 18:32 [PATCH v2 0/5] gpio: Add support for GPIO names for several ISA_BUS_API drivers William Breathitt Gray
2017-01-30 18:32 ` [PATCH v2 1/5] gpio: 104-dio-48e: Add support for GPIO names William Breathitt Gray
2017-01-30 18:33 ` [PATCH v2 2/5] gpio: 104-idi-48: " William Breathitt Gray
@ 2017-01-30 18:33 ` William Breathitt Gray
2017-02-01 15:05 ` Linus Walleij
2017-01-30 18:33 ` [PATCH v2 4/5] gpio: gpio-mm: " William Breathitt Gray
2017-01-30 18:33 ` [PATCH v2 5/5] gpio: ws16c48: " William Breathitt Gray
4 siblings, 1 reply; 11+ messages in thread
From: William Breathitt Gray @ 2017-01-30 18:33 UTC (permalink / raw)
To: linus.walleij, gnurou; +Cc: linux-gpio, linux-kernel, William Breathitt Gray
This patch sets the gpio_chip names option with an array of GPIO line
names that match the manual documentation for the ACCES 104-IDIO-16.
This should make it easier for users to identify which GPIO line
corresponds to a respective GPIO pin on the device.
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
---
drivers/gpio/gpio-104-idio-16.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/gpio/gpio-104-idio-16.c b/drivers/gpio/gpio-104-idio-16.c
index 01a091e17614..96e740551976 100644
--- a/drivers/gpio/gpio-104-idio-16.c
+++ b/drivers/gpio/gpio-104-idio-16.c
@@ -210,6 +210,14 @@ static irqreturn_t idio_16_irq_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
+#define IDIO_16_NGPIO 32
+static const char *idio_16_names[IDIO_16_NGPIO] = {
+ "OUT0", "OUT1", "OUT2", "OUT3", "OUT4", "OUT5", "OUT6", "OUT7",
+ "OUT8", "OUT9", "OUT10", "OUT11", "OUT12", "OUT13", "OUT14", "OUT15",
+ "IIN0", "IIN1", "IIN2", "IIN3", "IIN4", "IIN5", "IIN6", "IIN7",
+ "IIN8", "IIN9", "IIN10", "IIN11", "IIN12", "IIN13", "IIN14", "IIN15"
+};
+
static int idio_16_probe(struct device *dev, unsigned int id)
{
struct idio_16_gpio *idio16gpio;
@@ -230,7 +238,8 @@ static int idio_16_probe(struct device *dev, unsigned int id)
idio16gpio->chip.parent = dev;
idio16gpio->chip.owner = THIS_MODULE;
idio16gpio->chip.base = -1;
- idio16gpio->chip.ngpio = 32;
+ idio16gpio->chip.ngpio = IDIO_16_NGPIO;
+ idio16gpio->chip.names = idio_16_names;
idio16gpio->chip.get_direction = idio_16_gpio_get_direction;
idio16gpio->chip.direction_input = idio_16_gpio_direction_input;
idio16gpio->chip.direction_output = idio_16_gpio_direction_output;
--
2.11.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* Re: [PATCH v2 3/5] gpio: 104-idio-16: Add support for GPIO names
2017-01-30 18:33 ` [PATCH v2 3/5] gpio: 104-idio-16: " William Breathitt Gray
@ 2017-02-01 15:05 ` Linus Walleij
0 siblings, 0 replies; 11+ messages in thread
From: Linus Walleij @ 2017-02-01 15:05 UTC (permalink / raw)
To: William Breathitt Gray; +Cc: Alexandre Courbot, linux-gpio, linux-kernel
On Mon, Jan 30, 2017 at 7:33 PM, William Breathitt Gray
<vilhelm.gray@gmail.com> wrote:
> This patch sets the gpio_chip names option with an array of GPIO line
> names that match the manual documentation for the ACCES 104-IDIO-16.
> This should make it easier for users to identify which GPIO line
> corresponds to a respective GPIO pin on the device.
>
> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Patch applied.
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v2 4/5] gpio: gpio-mm: Add support for GPIO names
2017-01-30 18:32 [PATCH v2 0/5] gpio: Add support for GPIO names for several ISA_BUS_API drivers William Breathitt Gray
` (2 preceding siblings ...)
2017-01-30 18:33 ` [PATCH v2 3/5] gpio: 104-idio-16: " William Breathitt Gray
@ 2017-01-30 18:33 ` William Breathitt Gray
2017-02-01 15:05 ` Linus Walleij
2017-01-30 18:33 ` [PATCH v2 5/5] gpio: ws16c48: " William Breathitt Gray
4 siblings, 1 reply; 11+ messages in thread
From: William Breathitt Gray @ 2017-01-30 18:33 UTC (permalink / raw)
To: linus.walleij, gnurou; +Cc: linux-gpio, linux-kernel, William Breathitt Gray
This patch sets the gpio_chip names option with an array of GPIO line
names that match the manual documentation for the Diamond Systems
GPIO-MM. This should make it easier for users to identify which GPIO
line corresponds to a respective GPIO pin on the device.
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
---
drivers/gpio/gpio-gpio-mm.c | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/gpio/gpio-gpio-mm.c b/drivers/gpio/gpio-gpio-mm.c
index 393c8f9cf30d..bf74cc55ab44 100644
--- a/drivers/gpio/gpio-gpio-mm.c
+++ b/drivers/gpio/gpio-gpio-mm.c
@@ -230,6 +230,18 @@ static void gpiomm_gpio_set_multiple(struct gpio_chip *chip,
}
}
+#define GPIOMM_NGPIO 48
+static const char *gpiomm_names[GPIOMM_NGPIO] = {
+ "Port 1A0", "Port 1A1", "Port 1A2", "Port 1A3", "Port 1A4", "Port 1A5",
+ "Port 1A6", "Port 1A7", "Port 1B0", "Port 1B1", "Port 1B2", "Port 1B3",
+ "Port 1B4", "Port 1B5", "Port 1B6", "Port 1B7", "Port 1C0", "Port 1C1",
+ "Port 1C2", "Port 1C3", "Port 1C4", "Port 1C5", "Port 1C6", "Port 1C7",
+ "Port 2A0", "Port 2A1", "Port 2A2", "Port 2A3", "Port 2A4", "Port 2A5",
+ "Port 2A6", "Port 2A7", "Port 2B0", "Port 2B1", "Port 2B2", "Port 2B3",
+ "Port 2B4", "Port 2B5", "Port 2B6", "Port 2B7", "Port 2C0", "Port 2C1",
+ "Port 2C2", "Port 2C3", "Port 2C4", "Port 2C5", "Port 2C6", "Port 2C7",
+};
+
static int gpiomm_probe(struct device *dev, unsigned int id)
{
struct gpiomm_gpio *gpiommgpio;
@@ -250,7 +262,8 @@ static int gpiomm_probe(struct device *dev, unsigned int id)
gpiommgpio->chip.parent = dev;
gpiommgpio->chip.owner = THIS_MODULE;
gpiommgpio->chip.base = -1;
- gpiommgpio->chip.ngpio = 48;
+ gpiommgpio->chip.ngpio = GPIOMM_NGPIO;
+ gpiommgpio->chip.names = gpiomm_names;
gpiommgpio->chip.get_direction = gpiomm_gpio_get_direction;
gpiommgpio->chip.direction_input = gpiomm_gpio_direction_input;
gpiommgpio->chip.direction_output = gpiomm_gpio_direction_output;
--
2.11.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* Re: [PATCH v2 4/5] gpio: gpio-mm: Add support for GPIO names
2017-01-30 18:33 ` [PATCH v2 4/5] gpio: gpio-mm: " William Breathitt Gray
@ 2017-02-01 15:05 ` Linus Walleij
0 siblings, 0 replies; 11+ messages in thread
From: Linus Walleij @ 2017-02-01 15:05 UTC (permalink / raw)
To: William Breathitt Gray; +Cc: Alexandre Courbot, linux-gpio, linux-kernel
On Mon, Jan 30, 2017 at 7:33 PM, William Breathitt Gray
<vilhelm.gray@gmail.com> wrote:
> This patch sets the gpio_chip names option with an array of GPIO line
> names that match the manual documentation for the Diamond Systems
> GPIO-MM. This should make it easier for users to identify which GPIO
> line corresponds to a respective GPIO pin on the device.
>
> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Patch applied.
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v2 5/5] gpio: ws16c48: Add support for GPIO names
2017-01-30 18:32 [PATCH v2 0/5] gpio: Add support for GPIO names for several ISA_BUS_API drivers William Breathitt Gray
` (3 preceding siblings ...)
2017-01-30 18:33 ` [PATCH v2 4/5] gpio: gpio-mm: " William Breathitt Gray
@ 2017-01-30 18:33 ` William Breathitt Gray
2017-02-01 15:06 ` Linus Walleij
4 siblings, 1 reply; 11+ messages in thread
From: William Breathitt Gray @ 2017-01-30 18:33 UTC (permalink / raw)
To: linus.walleij, gnurou; +Cc: linux-gpio, linux-kernel, William Breathitt Gray
This patch sets the gpio_chip names option with an array of GPIO line
names that match the manual documentation for the WinSystems WS16C48.
This should make it easier for users to identify which GPIO line
corresponds to a respective GPIO pin on the device.
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
---
drivers/gpio/gpio-ws16c48.c | 19 ++++++++++++++++++-
1 file changed, 18 insertions(+), 1 deletion(-)
diff --git a/drivers/gpio/gpio-ws16c48.c b/drivers/gpio/gpio-ws16c48.c
index 65de20dfbe7a..3dd2cdf538ce 100644
--- a/drivers/gpio/gpio-ws16c48.c
+++ b/drivers/gpio/gpio-ws16c48.c
@@ -341,6 +341,22 @@ static irqreturn_t ws16c48_irq_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
+#define WS16C48_NGPIO 48
+static const char *ws16c48_names[WS16C48_NGPIO] = {
+ "Port 0 Bit 0", "Port 0 Bit 1", "Port 0 Bit 2", "Port 0 Bit 3",
+ "Port 0 Bit 4", "Port 0 Bit 5", "Port 0 Bit 6", "Port 0 Bit 7",
+ "Port 1 Bit 0", "Port 1 Bit 1", "Port 1 Bit 2", "Port 1 Bit 3",
+ "Port 1 Bit 4", "Port 1 Bit 5", "Port 1 Bit 6", "Port 1 Bit 7",
+ "Port 2 Bit 0", "Port 2 Bit 1", "Port 2 Bit 2", "Port 2 Bit 3",
+ "Port 2 Bit 4", "Port 2 Bit 5", "Port 2 Bit 6", "Port 2 Bit 7",
+ "Port 3 Bit 0", "Port 3 Bit 1", "Port 3 Bit 2", "Port 3 Bit 3",
+ "Port 3 Bit 4", "Port 3 Bit 5", "Port 3 Bit 6", "Port 3 Bit 7",
+ "Port 4 Bit 0", "Port 4 Bit 1", "Port 4 Bit 2", "Port 4 Bit 3",
+ "Port 4 Bit 4", "Port 4 Bit 5", "Port 4 Bit 6", "Port 4 Bit 7",
+ "Port 5 Bit 0", "Port 5 Bit 1", "Port 5 Bit 2", "Port 5 Bit 3",
+ "Port 5 Bit 4", "Port 5 Bit 5", "Port 5 Bit 6", "Port 5 Bit 7"
+};
+
static int ws16c48_probe(struct device *dev, unsigned int id)
{
struct ws16c48_gpio *ws16c48gpio;
@@ -361,7 +377,8 @@ static int ws16c48_probe(struct device *dev, unsigned int id)
ws16c48gpio->chip.parent = dev;
ws16c48gpio->chip.owner = THIS_MODULE;
ws16c48gpio->chip.base = -1;
- ws16c48gpio->chip.ngpio = 48;
+ ws16c48gpio->chip.ngpio = WS16C48_NGPIO;
+ ws16c48gpio->chip.names = ws16c48_names;
ws16c48gpio->chip.get_direction = ws16c48_gpio_get_direction;
ws16c48gpio->chip.direction_input = ws16c48_gpio_direction_input;
ws16c48gpio->chip.direction_output = ws16c48_gpio_direction_output;
--
2.11.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* Re: [PATCH v2 5/5] gpio: ws16c48: Add support for GPIO names
2017-01-30 18:33 ` [PATCH v2 5/5] gpio: ws16c48: " William Breathitt Gray
@ 2017-02-01 15:06 ` Linus Walleij
0 siblings, 0 replies; 11+ messages in thread
From: Linus Walleij @ 2017-02-01 15:06 UTC (permalink / raw)
To: William Breathitt Gray; +Cc: Alexandre Courbot, linux-gpio, linux-kernel
On Mon, Jan 30, 2017 at 7:33 PM, William Breathitt Gray
<vilhelm.gray@gmail.com> wrote:
> This patch sets the gpio_chip names option with an array of GPIO line
> names that match the manual documentation for the WinSystems WS16C48.
> This should make it easier for users to identify which GPIO line
> corresponds to a respective GPIO pin on the device.
>
> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Patch applied.
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 11+ messages in thread