* [PATCH] usb: phy: samsung: Add support for EXYNOS4210
@ 2013-05-28 9:04 Jingoo Han
2013-05-28 17:33 ` Felipe Balbi
[not found] ` <CAD6zSYO=2pNmYb2gofZpRYViQEbvMMPxH_MqPsOo-yPj0-OFmA@mail.gmail.com>
0 siblings, 2 replies; 3+ messages in thread
From: Jingoo Han @ 2013-05-28 9:04 UTC (permalink / raw)
To: 'Felipe Balbi'
Cc: linux-usb, 'Greg KH', 'Jingoo Han',
linux-samsung-soc, linux-kernel, 'Vivek Gautam',
'Praveen Paneri',
Kukjin Kim
Add support for EXYNOS4210 that includes USB EHCI/OHCI.
Previous PHY initialization code is not correct; thus, it is modifed
to support EXYNOS4210 PHY. Also, after common clock framework for
Samsung is added, clock name is defined as 'usb_device'.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
---
Tested on Exynos4210.
drivers/usb/phy/phy-samsung-usb.h | 35 ++++++++++++++---
drivers/usb/phy/phy-samsung-usb2.c | 74 +++++++++++++++++++++++++++++++++---
2 files changed, 98 insertions(+), 11 deletions(-)
diff --git a/drivers/usb/phy/phy-samsung-usb.h b/drivers/usb/phy/phy-samsung-usb.h
index 70a9cae..34c35e8 100644
--- a/drivers/usb/phy/phy-samsung-usb.h
+++ b/drivers/usb/phy/phy-samsung-usb.h
@@ -22,13 +22,22 @@
#define SAMSUNG_PHYPWR (0x00)
+#define PHYPWR_PHY1_HSIC_NORMAL_MASK (0xf << 9)
+#define PHYPWR_PHY1_HSIC1_SLEEP (1 << 12)
+#define PHYPWR_PHY1_HSIC1_FORCE_SUSPEND (1 << 11)
+#define PHYPWR_PHY1_HSIC0_SLEEP (1 << 10)
+#define PHYPWR_PHY1_HSIC0_FORCE_SUSPEND (1 << 9)
+#define PHYPWR_PHY1_STD_NORMAL_MASK (0x7 << 6)
+#define PHYPWR_PHY1_STD_SLEEP (1 << 8)
+#define PHYPWR_PHY1_STD_ANALOG_POWERDOWN (1 << 7)
+#define PHYPWR_PHY1_STD_FORCE_SUSPEND (1 << 6)
#define PHYPWR_NORMAL_MASK (0x19 << 0)
#define PHYPWR_OTG_DISABLE (0x1 << 4)
#define PHYPWR_ANALOG_POWERDOWN (0x1 << 3)
#define PHYPWR_FORCE_SUSPEND (0x1 << 1)
/* For Exynos4 */
-#define PHYPWR_NORMAL_MASK_PHY0 (0x39 << 0)
-#define PHYPWR_SLEEP_PHY0 (0x1 << 5)
+#define PHYPWR_PHY0_NORMAL_MASK (0x39 << 0)
+#define PHYPWR_PHY0_SLEEP (0x1 << 5)
#define SAMSUNG_PHYCLK (0x04)
@@ -43,9 +52,25 @@
#define SAMSUNG_RSTCON (0x08)
-#define RSTCON_PHYLINK_SWRST (0x1 << 2)
-#define RSTCON_HLINK_SWRST (0x1 << 1)
-#define RSTCON_SWRST (0x1 << 0)
+#define RSTCON_HOST_LINK_PORT_SWRST_MASK (0xf << 6)
+#define RSTCON_HOST_LINK_PORT2_SWRST (0x1 << 9)
+#define RSTCON_HOST_LINK_PORT1_SWRST (0x1 << 8)
+#define RSTCON_HOST_LINK_PORT0_SWRST (0x1 << 7)
+#define RSTCON_HOST_LINK_ALL_SWRST (0x1 << 6)
+#define RSTCON_PHY1_SWRST_MASK (0x7 << 3)
+#define RSTCON_PHY1_HSIC_SWRST (0x1 << 5)
+#define RSTCON_PHY1_STD_SWRST (0x1 << 4)
+#define RSTCON_PHY1_ALL_SWRST (0x1 << 3)
+#define RSTCON_PHY0_SWRST_MASK (0x7 << 0)
+#define RSTCON_PHY0_PHYLINK_SWRST (0x1 << 2)
+#define RSTCON_PHY0_HLINK_SWRST (0x1 << 1)
+#define RSTCON_PHY0_SWRST (0x1 << 0)
+
+/* EXYNOS4 */
+#define EXYNOS4_PHY1CON (0x34)
+
+#define PHY1CON_FPENABLEN (0x1 << 0)
+
/* EXYNOS5 */
#define EXYNOS5_PHY_HOST_CTRL0 (0x00)
diff --git a/drivers/usb/phy/phy-samsung-usb2.c b/drivers/usb/phy/phy-samsung-usb2.c
index 9d5e273..4f93d84 100644
--- a/drivers/usb/phy/phy-samsung-usb2.c
+++ b/drivers/usb/phy/phy-samsung-usb2.c
@@ -158,6 +158,15 @@ static void samsung_exynos5_usb2phy_enable(struct samsung_usbphy *sphy)
writel(ohcictrl, regs + EXYNOS5_PHY_HOST_OHCICTRL);
}
+static bool exynos4_phyhost_is_on(void __iomem *regs)
+{
+ u32 reg;
+
+ reg = readl(regs + SAMSUNG_PHYPWR);
+
+ return !(reg & PHYPWR_PHY1_STD_ANALOG_POWERDOWN);
+}
+
static void samsung_usb2phy_enable(struct samsung_usbphy *sphy)
{
void __iomem *regs = sphy->regs;
@@ -165,6 +174,18 @@ static void samsung_usb2phy_enable(struct samsung_usbphy *sphy)
u32 phyclk;
u32 rstcon;
+ switch (sphy->drv_data->cpu_type) {
+ case TYPE_EXYNOS4210:
+ atomic_inc(&sphy->phy_usage);
+
+ if (exynos4_phyhost_is_on(regs)) {
+ dev_info(sphy->dev, "Already power on PHY\n");
+ return;
+ }
+ default:
+ break;
+ }
+
/* set clock frequency for PLL */
phyclk = sphy->ref_clk_freq;
phypwr = readl(regs + SAMSUNG_PHYPWR);
@@ -174,22 +195,48 @@ static void samsung_usb2phy_enable(struct samsung_usbphy *sphy)
case TYPE_S3C64XX:
phyclk &= ~PHYCLK_COMMON_ON_N;
phypwr &= ~PHYPWR_NORMAL_MASK;
- rstcon |= RSTCON_SWRST;
+ rstcon |= RSTCON_PHY0_SWRST;
break;
case TYPE_EXYNOS4210:
- phypwr &= ~PHYPWR_NORMAL_MASK_PHY0;
- rstcon |= RSTCON_SWRST;
+ phypwr &= ~(PHYPWR_PHY0_NORMAL_MASK |
+ PHYPWR_PHY1_STD_NORMAL_MASK |
+ PHYPWR_PHY1_HSIC_NORMAL_MASK);
+ rstcon |= (RSTCON_PHY0_SWRST_MASK |
+ RSTCON_PHY1_SWRST_MASK |
+ RSTCON_HOST_LINK_PORT_SWRST_MASK);
default:
break;
}
writel(phyclk, regs + SAMSUNG_PHYCLK);
- /* Configure PHY0 for normal operation*/
+
+ switch (sphy->drv_data->cpu_type) {
+ case TYPE_EXYNOS4210:
+ /* floating prevention logic: disable */
+ writel((readl(regs + EXYNOS4_PHY1CON) | PHY1CON_FPENABLEN),
+ regs + EXYNOS4_PHY1CON);
+ default:
+ break;
+ }
+
+ /* Configure PHY0, PHY1 and HSIC for normal operation*/
writel(phypwr, regs + SAMSUNG_PHYPWR);
+
/* reset all ports of PHY and Link */
writel(rstcon, regs + SAMSUNG_RSTCON);
udelay(10);
- rstcon &= ~RSTCON_SWRST;
+
+ switch (sphy->drv_data->cpu_type) {
+ case TYPE_S3C64XX:
+ rstcon &= ~RSTCON_PHY0_SWRST;
+ break;
+ case TYPE_EXYNOS4210:
+ rstcon &= ~(RSTCON_PHY0_SWRST_MASK |
+ RSTCON_PHY1_SWRST_MASK |
+ RSTCON_HOST_LINK_PORT_SWRST_MASK);
+ default:
+ break;
+ }
writel(rstcon, regs + SAMSUNG_RSTCON);
}
@@ -233,6 +280,16 @@ static void samsung_usb2phy_disable(struct samsung_usbphy *sphy)
void __iomem *regs = sphy->regs;
u32 phypwr;
+ switch (sphy->drv_data->cpu_type) {
+ case TYPE_EXYNOS4210:
+ if (atomic_dec_return(&sphy->phy_usage) > 0) {
+ dev_info(sphy->dev, "still being used\n");
+ return;
+ }
+ default:
+ break;
+ }
+
phypwr = readl(regs + SAMSUNG_PHYPWR);
switch (sphy->drv_data->cpu_type) {
@@ -240,7 +297,9 @@ static void samsung_usb2phy_disable(struct samsung_usbphy *sphy)
phypwr |= PHYPWR_NORMAL_MASK;
break;
case TYPE_EXYNOS4210:
- phypwr |= PHYPWR_NORMAL_MASK_PHY0;
+ phypwr |= (PHYPWR_PHY0_NORMAL_MASK |
+ PHYPWR_PHY1_STD_NORMAL_MASK |
+ PHYPWR_PHY1_HSIC_NORMAL_MASK);
default:
break;
}
@@ -379,6 +438,8 @@ static int samsung_usb2phy_probe(struct platform_device *pdev)
if (drv_data->cpu_type == TYPE_EXYNOS5250)
clk = devm_clk_get(dev, "usbhost");
+ else if (drv_data->cpu_type == TYPE_EXYNOS4210)
+ clk = devm_clk_get(dev, "usb_device");
else
clk = devm_clk_get(dev, "otg");
@@ -444,6 +505,7 @@ static const struct samsung_usbphy_drvdata usb2phy_exynos4 = {
.cpu_type = TYPE_EXYNOS4210,
.devphy_en_mask = EXYNOS_USBPHY_ENABLE,
.hostphy_en_mask = EXYNOS_USBPHY_ENABLE,
+ .hostphy_reg_offset = EXYNOS_USBHOST_PHY_CTRL_OFFSET,
};
static struct samsung_usbphy_drvdata usb2phy_exynos5 = {
--
1.7.10.4
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] usb: phy: samsung: Add support for EXYNOS4210
2013-05-28 9:04 [PATCH] usb: phy: samsung: Add support for EXYNOS4210 Jingoo Han
@ 2013-05-28 17:33 ` Felipe Balbi
[not found] ` <CAD6zSYO=2pNmYb2gofZpRYViQEbvMMPxH_MqPsOo-yPj0-OFmA@mail.gmail.com>
1 sibling, 0 replies; 3+ messages in thread
From: Felipe Balbi @ 2013-05-28 17:33 UTC (permalink / raw)
To: Jingoo Han
Cc: 'Felipe Balbi', linux-usb, 'Greg KH',
linux-samsung-soc, linux-kernel, 'Vivek Gautam',
'Praveen Paneri',
Kukjin Kim
[-- Attachment #1: Type: text/plain, Size: 449 bytes --]
On Tue, May 28, 2013 at 06:04:07PM +0900, Jingoo Han wrote:
> @@ -165,6 +174,18 @@ static void samsung_usb2phy_enable(struct samsung_usbphy *sphy)
> u32 phyclk;
> u32 rstcon;
>
> + switch (sphy->drv_data->cpu_type) {
> + case TYPE_EXYNOS4210:
> + atomic_inc(&sphy->phy_usage);
please switch over to the generic reference counting which I have
pending in my testing branch. It'll be available for v3.11 merge window.
--
balbi
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
* Fwd: [PATCH] usb: phy: samsung: Add support for EXYNOS4210
[not found] ` <CAD6zSYO=2pNmYb2gofZpRYViQEbvMMPxH_MqPsOo-yPj0-OFmA@mail.gmail.com>
@ 2013-06-06 4:14 ` Praveen Paneri
0 siblings, 0 replies; 3+ messages in thread
From: Praveen Paneri @ 2013-06-06 4:14 UTC (permalink / raw)
To: linux-usb, Greg KH, Jingoo Han, linux-samsung-soc, linux-kernel,
Vivek Gautam, Praveen Paneri, Kukjin Kim
Hi,
On Tue, May 28, 2013 at 2:34 PM, Jingoo Han <jg1.han@samsung.com> wrote:
> Add support for EXYNOS4210 that includes USB EHCI/OHCI.
> Previous PHY initialization code is not correct; thus, it is modifed
^^^^^ You might
want to say "previous PHY init code does not support HOST and HSIC
PHY."
> to support EXYNOS4210 PHY. Also, after common clock framework for
> Samsung is added, clock name is defined as 'usb_device'.
>
> Signed-off-by: Jingoo Han <jg1.han@samsung.com>
> ---
> Tested on Exynos4210.
>
> drivers/usb/phy/phy-samsung-usb.h | 35 ++++++++++++++---
> drivers/usb/phy/phy-samsung-usb2.c | 74 +++++++++++++++++++++++++++++++++---
> 2 files changed, 98 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/usb/phy/phy-samsung-usb.h b/drivers/usb/phy/phy-samsung-usb.h
> index 70a9cae..34c35e8 100644
> --- a/drivers/usb/phy/phy-samsung-usb.h
> +++ b/drivers/usb/phy/phy-samsung-usb.h
> @@ -22,13 +22,22 @@
>
> #define SAMSUNG_PHYPWR (0x00)
>
> +#define PHYPWR_PHY1_HSIC_NORMAL_MASK (0xf << 9)
> +#define PHYPWR_PHY1_HSIC1_SLEEP (1 << 12)
> +#define PHYPWR_PHY1_HSIC1_FORCE_SUSPEND (1 << 11)
> +#define PHYPWR_PHY1_HSIC0_SLEEP (1 << 10)
> +#define PHYPWR_PHY1_HSIC0_FORCE_SUSPEND (1 << 9)
> +#define PHYPWR_PHY1_STD_NORMAL_MASK (0x7 << 6)
> +#define PHYPWR_PHY1_STD_SLEEP (1 << 8)
> +#define PHYPWR_PHY1_STD_ANALOG_POWERDOWN (1 << 7)
> +#define PHYPWR_PHY1_STD_FORCE_SUSPEND (1 << 6)
> #define PHYPWR_NORMAL_MASK (0x19 << 0)
> #define PHYPWR_OTG_DISABLE (0x1 << 4)
> #define PHYPWR_ANALOG_POWERDOWN (0x1 << 3)
> #define PHYPWR_FORCE_SUSPEND (0x1 << 1)
> /* For Exynos4 */
This comment is misplaced?
> -#define PHYPWR_NORMAL_MASK_PHY0 (0x39 << 0)
> -#define PHYPWR_SLEEP_PHY0 (0x1 << 5)
> +#define PHYPWR_PHY0_NORMAL_MASK (0x39 << 0)
> +#define PHYPWR_PHY0_SLEEP (0x1 << 5)
>
> #define SAMSUNG_PHYCLK (0x04)
>
> @@ -43,9 +52,25 @@
>
> #define SAMSUNG_RSTCON (0x08)
>
> -#define RSTCON_PHYLINK_SWRST (0x1 << 2)
> -#define RSTCON_HLINK_SWRST (0x1 << 1)
> -#define RSTCON_SWRST (0x1 << 0)
> +#define RSTCON_HOST_LINK_PORT_SWRST_MASK (0xf << 6)
> +#define RSTCON_HOST_LINK_PORT2_SWRST (0x1 << 9)
> +#define RSTCON_HOST_LINK_PORT1_SWRST (0x1 << 8)
> +#define RSTCON_HOST_LINK_PORT0_SWRST (0x1 << 7)
> +#define RSTCON_HOST_LINK_ALL_SWRST (0x1 << 6)
> +#define RSTCON_PHY1_SWRST_MASK (0x7 << 3)
> +#define RSTCON_PHY1_HSIC_SWRST (0x1 << 5)
> +#define RSTCON_PHY1_STD_SWRST (0x1 << 4)
> +#define RSTCON_PHY1_ALL_SWRST (0x1 << 3)
> +#define RSTCON_PHY0_SWRST_MASK (0x7 << 0)
> +#define RSTCON_PHY0_PHYLINK_SWRST (0x1 << 2)
> +#define RSTCON_PHY0_HLINK_SWRST (0x1 << 1)
> +#define RSTCON_PHY0_SWRST (0x1 << 0)
> +
> +/* EXYNOS4 */
> +#define EXYNOS4_PHY1CON (0x34)
> +
> +#define PHY1CON_FPENABLEN (0x1 << 0)
> +
>
> /* EXYNOS5 */
> #define EXYNOS5_PHY_HOST_CTRL0 (0x00)
> diff --git a/drivers/usb/phy/phy-samsung-usb2.c b/drivers/usb/phy/phy-samsung-usb2.c
> index 9d5e273..4f93d84 100644
> --- a/drivers/usb/phy/phy-samsung-usb2.c
> +++ b/drivers/usb/phy/phy-samsung-usb2.c
> @@ -158,6 +158,15 @@ static void samsung_exynos5_usb2phy_enable(struct samsung_usbphy *sphy)
> writel(ohcictrl, regs + EXYNOS5_PHY_HOST_OHCICTRL);
> }
>
> +static bool exynos4_phyhost_is_on(void __iomem *regs)
> +{
> + u32 reg;
> +
> + reg = readl(regs + SAMSUNG_PHYPWR);
> +
> + return !(reg & PHYPWR_PHY1_STD_ANALOG_POWERDOWN);
> +}
> +
> static void samsung_usb2phy_enable(struct samsung_usbphy *sphy)
> {
> void __iomem *regs = sphy->regs;
> @@ -165,6 +174,18 @@ static void samsung_usb2phy_enable(struct samsung_usbphy *sphy)
> u32 phyclk;
> u32 rstcon;
>
> + switch (sphy->drv_data->cpu_type) {
> + case TYPE_EXYNOS4210:
> + atomic_inc(&sphy->phy_usage);
> +
> + if (exynos4_phyhost_is_on(regs)) {
> + dev_info(sphy->dev, "Already power on PHY\n");
> + return;
> + }
> + default:
> + break;
> + }
> +
> /* set clock frequency for PLL */
> phyclk = sphy->ref_clk_freq;
> phypwr = readl(regs + SAMSUNG_PHYPWR);
> @@ -174,22 +195,48 @@ static void samsung_usb2phy_enable(struct samsung_usbphy *sphy)
> case TYPE_S3C64XX:
> phyclk &= ~PHYCLK_COMMON_ON_N;
> phypwr &= ~PHYPWR_NORMAL_MASK;
> - rstcon |= RSTCON_SWRST;
> + rstcon |= RSTCON_PHY0_SWRST;
> break;
> case TYPE_EXYNOS4210:
> - phypwr &= ~PHYPWR_NORMAL_MASK_PHY0;
> - rstcon |= RSTCON_SWRST;
> + phypwr &= ~(PHYPWR_PHY0_NORMAL_MASK |
Is it not possible to have separate initialization for PHY0? That
would save some power in case it is not used. we can make use of
sphy->phy_type.
> + PHYPWR_PHY1_STD_NORMAL_MASK |
> + PHYPWR_PHY1_HSIC_NORMAL_MASK);
> + rstcon |= (RSTCON_PHY0_SWRST_MASK |
> + RSTCON_PHY1_SWRST_MASK |
> + RSTCON_HOST_LINK_PORT_SWRST_MASK);
> default:
> break;
> }
>
> writel(phyclk, regs + SAMSUNG_PHYCLK);
> - /* Configure PHY0 for normal operation*/
> +
> + switch (sphy->drv_data->cpu_type) {
> + case TYPE_EXYNOS4210:
> + /* floating prevention logic: disable */
> + writel((readl(regs + EXYNOS4_PHY1CON) | PHY1CON_FPENABLEN),
> + regs + EXYNOS4_PHY1CON);
> + default:
> + break;
> + }
> +
> + /* Configure PHY0, PHY1 and HSIC for normal operation*/
> writel(phypwr, regs + SAMSUNG_PHYPWR);
> +
> /* reset all ports of PHY and Link */
> writel(rstcon, regs + SAMSUNG_RSTCON);
> udelay(10);
> - rstcon &= ~RSTCON_SWRST;
> +
> + switch (sphy->drv_data->cpu_type) {
> + case TYPE_S3C64XX:
> + rstcon &= ~RSTCON_PHY0_SWRST;
> + break;
> + case TYPE_EXYNOS4210:
> + rstcon &= ~(RSTCON_PHY0_SWRST_MASK |
> + RSTCON_PHY1_SWRST_MASK |
> + RSTCON_HOST_LINK_PORT_SWRST_MASK);
> + default:
> + break;
> + }
> writel(rstcon, regs + SAMSUNG_RSTCON);
How about saving the rstcon mask value in the previous switch case and
reuse it here to avoid the second switch case?
> }
>
> @@ -233,6 +280,16 @@ static void samsung_usb2phy_disable(struct samsung_usbphy *sphy)
> void __iomem *regs = sphy->regs;
> u32 phypwr;
>
> + switch (sphy->drv_data->cpu_type) {
> + case TYPE_EXYNOS4210:
> + if (atomic_dec_return(&sphy->phy_usage) > 0) {
> + dev_info(sphy->dev, "still being used\n");
> + return;
> + }
> + default:
> + break;
> + }
> +
> phypwr = readl(regs + SAMSUNG_PHYPWR);
>
> switch (sphy->drv_data->cpu_type) {
> @@ -240,7 +297,9 @@ static void samsung_usb2phy_disable(struct samsung_usbphy *sphy)
> phypwr |= PHYPWR_NORMAL_MASK;
> break;
> case TYPE_EXYNOS4210:
> - phypwr |= PHYPWR_NORMAL_MASK_PHY0;
> + phypwr |= (PHYPWR_PHY0_NORMAL_MASK |
Here as well...what if EHCI calls phy_shutdown and s3c-hsotg is still
operational?
> + PHYPWR_PHY1_STD_NORMAL_MASK |
> + PHYPWR_PHY1_HSIC_NORMAL_MASK);
> default:
> break;
> }
> @@ -379,6 +438,8 @@ static int samsung_usb2phy_probe(struct platform_device *pdev)
>
> if (drv_data->cpu_type == TYPE_EXYNOS5250)
> clk = devm_clk_get(dev, "usbhost");
> + else if (drv_data->cpu_type == TYPE_EXYNOS4210)
> + clk = devm_clk_get(dev, "usb_device");
Why to add another else if here when we still have the freedom to give
clock names in DT node. If we change the name here same has to be done
in s3c-hsotg driver as well. It will be too much to handle as older
SoCs are still using the name otg.
Regards,
Praveen
> else
> clk = devm_clk_get(dev, "otg");
>
> @@ -444,6 +505,7 @@ static const struct samsung_usbphy_drvdata usb2phy_exynos4 = {
> .cpu_type = TYPE_EXYNOS4210,
> .devphy_en_mask = EXYNOS_USBPHY_ENABLE,
> .hostphy_en_mask = EXYNOS_USBPHY_ENABLE,
> + .hostphy_reg_offset = EXYNOS_USBHOST_PHY_CTRL_OFFSET,
> };
>
> static struct samsung_usbphy_drvdata usb2phy_exynos5 = {
> --
> 1.7.10.4
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2013-06-06 4:14 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-05-28 9:04 [PATCH] usb: phy: samsung: Add support for EXYNOS4210 Jingoo Han
2013-05-28 17:33 ` Felipe Balbi
[not found] ` <CAD6zSYO=2pNmYb2gofZpRYViQEbvMMPxH_MqPsOo-yPj0-OFmA@mail.gmail.com>
2013-06-06 4:14 ` Fwd: " Praveen Paneri
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).