[PATCH] arm64: dts: sc7180: Fix ps8640 power sequence for Homestar rev4

[PATCH] arm64: dts: sc7180: Fix ps8640 power sequence for Homestar rev4

[yangcong]

When powering up the ps8640, we need to deassert PD right
after we turn on the vdd33 regulator. Unfortunately, the vdd33
regulator takes some time (~4ms) to turn on. Add in the delay
for the vdd33 regulator so that when the driver deasserts PD
that the regulator has had time to ramp.

Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com>
---
 arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r4.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r4.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r4.dts
index fb27106bbb4a..0de0c97f5728 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r4.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r4.dts
@@ -15,3 +15,7 @@ / {
 	model = "Google Homestar (rev4+)";
 	compatible = "google,homestar", "qcom,sc7180";
 };
+
+&pp3300_brij_ps8640 {
+	regulator-enable-ramp-delay = <4000>;
+};
-- 
2.25.1

Re: [PATCH] arm64: dts: sc7180: Fix ps8640 power sequence for Homestar rev4

[Doug Anderson]

Hi,

On Sun, Nov 14, 2021 at 7:02 PM yangcong
<yangcong5@huaqin.corp-partner.google.com> wrote:
>
> When powering up the ps8640, we need to deassert PD right
> after we turn on the vdd33 regulator. Unfortunately, the vdd33
> regulator takes some time (~4ms) to turn on. Add in the delay
> for the vdd33 regulator so that when the driver deasserts PD
> that the regulator has had time to ramp.
>
> Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com>
> ---
>  arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r4.dts | 4 ++++
>  1 file changed, 4 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r4.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r4.dts
> index fb27106bbb4a..0de0c97f5728 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r4.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r4.dts
> @@ -15,3 +15,7 @@ / {
>         model = "Google Homestar (rev4+)";
>         compatible = "google,homestar", "qcom,sc7180";
>  };
> +
> +&pp3300_brij_ps8640 {
> +       regulator-enable-ramp-delay = <4000>;
> +};

It should have been pointed out somewhere in the post, but this patch
depends on Philip's most recent, which is:

https://lore.kernel.org/r/20211029152647.v3.4.If7aaa8e36f1269acae5488035bd62ce543756bf8@changeid/

This seems fine to me. Apparently this 4ms delay isn't needed
lazor-rev9 (at least they were happy with the signals on that board)
which is why this is a homestar change. That can make sense since the
components on the two boards may be different.

In any case:

Reviewed-by: Douglas Anderson <dianders@chromium.org>

Re: [PATCH] arm64: dts: sc7180: Fix ps8640 power sequence for Homestar rev4

[Stephen Boyd]

Quoting yangcong (2021-11-14 19:01:55)
> When powering up the ps8640, we need to deassert PD right
> after we turn on the vdd33 regulator. Unfortunately, the vdd33
> regulator takes some time (~4ms) to turn on. Add in the delay
> for the vdd33 regulator so that when the driver deasserts PD
> that the regulator has had time to ramp.
>
> Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>

Re: (subset) [PATCH] arm64: dts: sc7180: Fix ps8640 power sequence for Homestar rev4

[Bjorn Andersson]

On Mon, 15 Nov 2021 11:01:55 +0800, yangcong wrote:
> When powering up the ps8640, we need to deassert PD right
> after we turn on the vdd33 regulator. Unfortunately, the vdd33
> regulator takes some time (~4ms) to turn on. Add in the delay
> for the vdd33 regulator so that when the driver deasserts PD
> that the regulator has had time to ramp.
> 
> 
> [...]

Applied, thanks!

[1/1] arm64: dts: sc7180: Fix ps8640 power sequence for Homestar rev4
      commit: 96e1e3a15273a99d89b1389e4487e734c7d37d8e

Best regards,
-- 
Bjorn Andersson <bjorn.andersson@linaro.org>