* [PATCH v7 1/3] dt-bindings: remoteproc: qcom: adsp: Convert binding to YAML
2021-10-28 8:13 [PATCH v7 0/3] Add support for sc7280 WPSS PIL loading Rakesh Pillai
@ 2021-10-28 8:13 ` Rakesh Pillai
2021-10-28 22:05 ` Stephen Boyd
2021-10-28 8:13 ` [PATCH v7 2/3] dt-bindings: remoteproc: qcom: Add SC7280 WPSS support Rakesh Pillai
2021-10-28 8:13 ` [PATCH v7 3/3] remoteproc: qcom: q6v5_wpss: Add support for sc7280 WPSS Rakesh Pillai
2 siblings, 1 reply; 11+ messages in thread
From: Rakesh Pillai @ 2021-10-28 8:13 UTC (permalink / raw)
To: agross, bjorn.andersson, ohad, mathieu.poirier, robh+dt, p.zabel
Cc: swboyd, linux-arm-msm, linux-remoteproc, devicetree,
linux-kernel, sibis, mpubbise, kuabhs, Rakesh Pillai
Convert Qualcomm ADSP/CDSP Remoteproc devicetree
binding to YAML.
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
---
.../bindings/remoteproc/qcom,hexagon-v56.txt | 140 ------------------
.../bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml | 161 +++++++++++++++++++++
.../bindings/remoteproc/qcom,sdm845-adsp-pil.yaml | 160 ++++++++++++++++++++
3 files changed, 321 insertions(+), 140 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.txt
create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml
create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.txt b/Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.txt
deleted file mode 100644
index 1337a3d..0000000
--- a/Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.txt
+++ /dev/null
@@ -1,140 +0,0 @@
-Qualcomm Technology Inc. Hexagon v56 Peripheral Image Loader
-
-This document defines the binding for a component that loads and boots firmware
-on the Qualcomm Technology Inc. Hexagon v56 core.
-
-- compatible:
- Usage: required
- Value type: <string>
- Definition: must be one of:
- "qcom,qcs404-cdsp-pil",
- "qcom,sdm845-adsp-pil"
-
-- reg:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: must specify the base address and size of the qdsp6ss register
-
-- interrupts-extended:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: must list the watchdog, fatal IRQs ready, handover and
- stop-ack IRQs
-
-- interrupt-names:
- Usage: required
- Value type: <stringlist>
- Definition: must be "wdog", "fatal", "ready", "handover", "stop-ack"
-
-- clocks:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: List of phandles and clock specifier pairs for the Hexagon,
- per clock-names below.
-
-- clock-names:
- Usage: required for SDM845 ADSP
- Value type: <stringlist>
- Definition: List of clock input name strings sorted in the same
- order as the clocks property. Definition must have
- "xo", "sway_cbcr", "lpass_ahbs_aon_cbcr",
- "lpass_ahbm_aon_cbcr", "qdsp6ss_xo", "qdsp6ss_sleep"
- and "qdsp6ss_core".
-
-- clock-names:
- Usage: required for QCS404 CDSP
- Value type: <stringlist>
- Definition: List of clock input name strings sorted in the same
- order as the clocks property. Definition must have
- "xo", "sway", "tbu", "bimc", "ahb_aon", "q6ss_slave",
- "q6ss_master", "q6_axim".
-
-- power-domains:
- Usage: required
- Value type: <phandle>
- Definition: reference to cx power domain node.
-
-- resets:
- Usage: required
- Value type: <phandle>
- Definition: reference to the list of resets for the Hexagon.
-
-- reset-names:
- Usage: required for SDM845 ADSP
- Value type: <stringlist>
- Definition: must be "pdc_sync" and "cc_lpass"
-
-- reset-names:
- Usage: required for QCS404 CDSP
- Value type: <stringlist>
- Definition: must be "restart"
-
-- qcom,halt-regs:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: a phandle reference to a syscon representing TCSR followed
- by the offset within syscon for Hexagon halt register.
-
-- memory-region:
- Usage: required
- Value type: <phandle>
- Definition: reference to the reserved-memory for the firmware
-
-- qcom,smem-states:
- Usage: required
- Value type: <phandle>
- Definition: reference to the smem state for requesting the Hexagon to
- shut down
-
-- qcom,smem-state-names:
- Usage: required
- Value type: <stringlist>
- Definition: must be "stop"
-
-
-= SUBNODES
-The adsp node may have an subnode named "glink-edge" that describes the
-communication edge, channels and devices related to the Hexagon.
-See ../soc/qcom/qcom,glink.txt for details on how to describe these.
-
-= EXAMPLE
-The following example describes the resources needed to boot control the
-ADSP, as it is found on SDM845 boards.
-
- remoteproc@17300000 {
- compatible = "qcom,sdm845-adsp-pil";
- reg = <0x17300000 0x40c>;
-
- interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "wdog", "fatal", "ready",
- "handover", "stop-ack";
-
- clocks = <&rpmhcc RPMH_CXO_CLK>,
- <&gcc GCC_LPASS_SWAY_CLK>,
- <&lpasscc LPASS_Q6SS_AHBS_AON_CLK>,
- <&lpasscc LPASS_Q6SS_AHBM_AON_CLK>,
- <&lpasscc LPASS_QDSP6SS_XO_CLK>,
- <&lpasscc LPASS_QDSP6SS_SLEEP_CLK>,
- <&lpasscc LPASS_QDSP6SS_CORE_CLK>;
- clock-names = "xo", "sway_cbcr",
- "lpass_ahbs_aon_cbcr",
- "lpass_ahbm_aon_cbcr", "qdsp6ss_xo",
- "qdsp6ss_sleep", "qdsp6ss_core";
-
- power-domains = <&rpmhpd SDM845_CX>;
-
- resets = <&pdc_reset PDC_AUDIO_SYNC_RESET>,
- <&aoss_reset AOSS_CC_LPASS_RESTART>;
- reset-names = "pdc_sync", "cc_lpass";
-
- qcom,halt-regs = <&tcsr_mutex_regs 0x22000>;
-
- memory-region = <&pil_adsp_mem>;
-
- qcom,smem-states = <&adsp_smp2p_out 0>;
- qcom,smem-state-names = "stop";
- };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml
new file mode 100644
index 0000000..90ca7e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml
@@ -0,0 +1,161 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,qcs404-cdsp-pil.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QCS404 CDSP Peripheral Image Loader
+
+maintainers:
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+ This document defines the binding for a component that loads and boots firmware
+ on the Qualcomm Technology Inc. CDSP.
+
+properties:
+ compatible:
+ enum:
+ - qcom,qcs404-cdsp-pil
+
+ reg:
+ maxItems: 1
+ description:
+ The base address and size of the qdsp6ss register
+
+ interrupts-extended:
+ items:
+ - description: Watchdog interrupt
+ - description: Fatal interrupt
+ - description: Ready interrupt
+ - description: Handover interrupt
+ - description: Stop acknowledge interrupt
+
+ interrupt-names:
+ items:
+ - const: wdog
+ - const: fatal
+ - const: ready
+ - const: handover
+ - const: stop-ack
+
+ clocks:
+ items:
+ - description: XO clock
+ - description: SWAY clock
+ - description: TBU clock
+ - description: BIMC clock
+ - description: AHB AON clock
+ - description: Q6SS SLAVE clock
+ - description: Q6SS MASTER clock
+ - description: Q6 AXIM clock
+
+ clock-names:
+ items:
+ - const: xo
+ - const: sway
+ - const: tbu
+ - const: bimc
+ - const: ahb_aon
+ - const: q6ss_slave
+ - const: q6ss_master
+ - const: q6_axim
+
+ power-domains:
+ items:
+ - description: CX power domain
+
+ resets:
+ items:
+ - description: AOSS restart
+
+ reset-names:
+ items:
+ - const: restart
+
+ memory-region:
+ maxItems: 1
+ description: Reference to the reserved-memory for the Hexagon core
+
+ qcom,halt-regs:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description:
+ Phandle reference to a syscon representing TCSR followed by the
+ three offsets within syscon for q6, modem and nc halt registers.
+
+ qcom,smem-states:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: States used by the AP to signal the Hexagon core
+ items:
+ - description: Stop the modem
+
+ qcom,smem-state-names:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: The names of the state bits used for SMP2P output
+ items:
+ - const: stop
+
+required:
+ - compatible
+ - reg
+ - interrupts-extended
+ - interrupt-names
+ - clocks
+ - clock-names
+ - power-domains
+ - resets
+ - reset-names
+ - qcom,halt-regs
+ - memory-region
+ - qcom,smem-states
+ - qcom,smem-state-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/qcom,gcc-qcs404.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+ #include <dt-bindings/clock/qcom,turingcc-qcs404.h>
+ remoteproc@b00000 {
+ compatible = "qcom,qcs404-cdsp-pil";
+ reg = <0x00b00000 0x4040>;
+
+ interrupts-extended = <&intc GIC_SPI 229 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&xo_board>,
+ <&gcc GCC_CDSP_CFG_AHB_CLK>,
+ <&gcc GCC_CDSP_TBU_CLK>,
+ <&gcc GCC_BIMC_CDSP_CLK>,
+ <&turingcc TURING_WRAPPER_AON_CLK>,
+ <&turingcc TURING_Q6SS_AHBS_AON_CLK>,
+ <&turingcc TURING_Q6SS_AHBM_AON_CLK>,
+ <&turingcc TURING_Q6SS_Q6_AXIM_CLK>;
+ clock-names = "xo",
+ "sway",
+ "tbu",
+ "bimc",
+ "ahb_aon",
+ "q6ss_slave",
+ "q6ss_master",
+ "q6_axim";
+
+ power-domains = <&rpmhpd SDM845_CX>;
+
+ resets = <&gcc GCC_CDSP_RESTART>;
+ reset-names = "restart";
+
+ qcom,halt-regs = <&tcsr 0x19004>;
+
+ memory-region = <&cdsp_fw_mem>;
+
+ qcom,smem-states = <&cdsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+ };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml
new file mode 100644
index 0000000..972671b
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml
@@ -0,0 +1,160 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,sdm845-adsp-pil.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDM845 ADSP Peripheral Image Loader
+
+maintainers:
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+ This document defines the binding for a component that loads and boots firmware
+ on the Qualcomm Technology Inc. ADSP.
+
+properties:
+ compatible:
+ enum:
+ - qcom,sdm845-adsp-pil
+
+ reg:
+ maxItems: 1
+ description:
+ The base address and size of the qdsp6ss register
+
+ interrupts-extended:
+ items:
+ - description: Watchdog interrupt
+ - description: Fatal interrupt
+ - description: Ready interrupt
+ - description: Handover interrupt
+ - description: Stop acknowledge interrupt
+
+ interrupt-names:
+ items:
+ - const: wdog
+ - const: fatal
+ - const: ready
+ - const: handover
+ - const: stop-ack
+
+ clocks:
+ items:
+ - description: XO clock
+ - description: SWAY clock
+ - description: LPASS AHBS AON clock
+ - description: LPASS AHBM AON clock
+ - description: QDSP XO clock
+ - description: Q6SP6SS SLEEP clock
+ - description: Q6SP6SS CORE clock
+
+ clock-names:
+ items:
+ - const: xo
+ - const: sway_cbcr
+ - const: lpass_ahbs_aon_cbcr
+ - const: lpass_ahbm_aon_cbcr
+ - const: qdsp6ss_xo
+ - const: qdsp6ss_sleep
+ - const: qdsp6ss_core
+
+ power-domains:
+ items:
+ - description: CX power domain
+
+ resets:
+ items:
+ - description: PDC AUDIO SYNC RESET
+ - description: CC LPASS restart
+
+ reset-names:
+ items:
+ - const: pdc_sync
+ - const: cc_lpass
+
+ memory-region:
+ maxItems: 1
+ description: Reference to the reserved-memory for the Hexagon core
+
+ qcom,halt-regs:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description:
+ Phandle reference to a syscon representing TCSR followed by the
+ three offsets within syscon for q6, modem and nc halt registers.
+
+ qcom,smem-states:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: States used by the AP to signal the Hexagon core
+ items:
+ - description: Stop the modem
+
+ qcom,smem-state-names:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: The names of the state bits used for SMP2P output
+ items:
+ - const: stop
+
+required:
+ - compatible
+ - reg
+ - interrupts-extended
+ - interrupt-names
+ - clocks
+ - clock-names
+ - power-domains
+ - resets
+ - reset-names
+ - qcom,halt-regs
+ - memory-region
+ - qcom,smem-states
+ - qcom,smem-state-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+ #include <dt-bindings/clock/qcom,lpass-sdm845.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+ #include <dt-bindings/reset/qcom,sdm845-pdc.h>
+ #include <dt-bindings/reset/qcom,sdm845-aoss.h>
+ remoteproc@17300000 {
+ compatible = "qcom,sdm845-adsp-pil";
+ reg = <0x17300000 0x40c>;
+
+ interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_LPASS_SWAY_CLK>,
+ <&lpasscc LPASS_Q6SS_AHBS_AON_CLK>,
+ <&lpasscc LPASS_Q6SS_AHBM_AON_CLK>,
+ <&lpasscc LPASS_QDSP6SS_XO_CLK>,
+ <&lpasscc LPASS_QDSP6SS_SLEEP_CLK>,
+ <&lpasscc LPASS_QDSP6SS_CORE_CLK>;
+ clock-names = "xo", "sway_cbcr",
+ "lpass_ahbs_aon_cbcr",
+ "lpass_ahbm_aon_cbcr", "qdsp6ss_xo",
+ "qdsp6ss_sleep", "qdsp6ss_core";
+
+ power-domains = <&rpmhpd SDM845_CX>;
+
+ resets = <&pdc_reset PDC_AUDIO_SYNC_RESET>,
+ <&aoss_reset AOSS_CC_LPASS_RESTART>;
+ reset-names = "pdc_sync", "cc_lpass";
+
+ qcom,halt-regs = <&tcsr_mutex_regs 0x22000>;
+
+ memory-region = <&pil_adsp_mem>;
+
+ qcom,smem-states = <&adsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+ };
--
2.7.4
^ permalink raw reply related [flat|nested] 11+ messages in thread* Re: [PATCH v7 1/3] dt-bindings: remoteproc: qcom: adsp: Convert binding to YAML
2021-10-28 8:13 ` [PATCH v7 1/3] dt-bindings: remoteproc: qcom: adsp: Convert binding to YAML Rakesh Pillai
@ 2021-10-28 22:05 ` Stephen Boyd
0 siblings, 0 replies; 11+ messages in thread
From: Stephen Boyd @ 2021-10-28 22:05 UTC (permalink / raw)
To: Rakesh Pillai, agross, bjorn.andersson, mathieu.poirier, ohad,
p.zabel, robh+dt
Cc: linux-arm-msm, linux-remoteproc, devicetree, linux-kernel, sibis,
mpubbise, kuabhs
Quoting Rakesh Pillai (2021-10-28 01:13:35)
> Convert Qualcomm ADSP/CDSP Remoteproc devicetree
> binding to YAML.
>
> Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
> ---
Found it. I think it hit spam :(
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml
> new file mode 100644
> index 0000000..90ca7e0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml
> @@ -0,0 +1,161 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/remoteproc/qcom,qcs404-cdsp-pil.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm QCS404 CDSP Peripheral Image Loader
> +
> +maintainers:
> + - Bjorn Andersson <bjorn.andersson@linaro.org>
> +
> +description:
> + This document defines the binding for a component that loads and boots firmware
> + on the Qualcomm Technology Inc. CDSP.
What does CDSP mean? Can you spell out the acronym once?
> +
> +properties:
> + compatible:
> + enum:
> + - qcom,qcs404-cdsp-pil
> +
> + reg:
> + maxItems: 1
> + description:
> + The base address and size of the qdsp6ss register
> +
> + interrupts-extended:
I think the recommendation is to use interrupts and the schema will know
to treat interrupts-extended the same.
> + items:
> + - description: Watchdog interrupt
> + - description: Fatal interrupt
> + - description: Ready interrupt
> + - description: Handover interrupt
> + - description: Stop acknowledge interrupt
> +
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v7 2/3] dt-bindings: remoteproc: qcom: Add SC7280 WPSS support
2021-10-28 8:13 [PATCH v7 0/3] Add support for sc7280 WPSS PIL loading Rakesh Pillai
2021-10-28 8:13 ` [PATCH v7 1/3] dt-bindings: remoteproc: qcom: adsp: Convert binding to YAML Rakesh Pillai
@ 2021-10-28 8:13 ` Rakesh Pillai
2021-10-28 22:08 ` Stephen Boyd
2021-10-28 8:13 ` [PATCH v7 3/3] remoteproc: qcom: q6v5_wpss: Add support for sc7280 WPSS Rakesh Pillai
2 siblings, 1 reply; 11+ messages in thread
From: Rakesh Pillai @ 2021-10-28 8:13 UTC (permalink / raw)
To: agross, bjorn.andersson, ohad, mathieu.poirier, robh+dt, p.zabel
Cc: swboyd, linux-arm-msm, linux-remoteproc, devicetree,
linux-kernel, sibis, mpubbise, kuabhs, Rakesh Pillai
Add WPSS PIL loading support for SC7280 SoCs.
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
---
.../bindings/remoteproc/qcom,sc7280-wpss-pil.yaml | 194 +++++++++++++++++++++
1 file changed, 194 insertions(+)
create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
new file mode 100644
index 0000000..96d11a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
@@ -0,0 +1,194 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,sc7280-wpss-pil.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7280 WPSS Peripheral Image Loader
+
+maintainers:
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+ This document defines the binding for a component that loads and boots firmware
+ on the Qualcomm Technology Inc. WPSS.
+
+properties:
+ compatible:
+ enum:
+ - qcom,sc7280-wpss-pil
+
+ reg:
+ maxItems: 1
+ description:
+ The base address and size of the qdsp6ss register
+
+ interrupts:
+ items:
+ - description: Watchdog interrupt
+ - description: Fatal interrupt
+ - description: Ready interrupt
+ - description: Handover interrupt
+ - description: Stop acknowledge interrupt
+ - description: Shutdown acknowledge interrupt
+
+ interrupt-names:
+ items:
+ - const: wdog
+ - const: fatal
+ - const: ready
+ - const: handover
+ - const: stop-ack
+ - const: shutdown-ack
+
+ clocks:
+ items:
+ - description: GCC WPSS AHB BDG Master clock
+ - description: GCC WPSS AHB clock
+ - description: GCC WPSS RSCP clock
+ - description: XO clock
+
+ clock-names:
+ items:
+ - const: ahb_bdg
+ - const: ahb
+ - const: rscp
+ - const: xo
+
+ power-domains:
+ items:
+ - description: CX power domain
+ - description: MX power domain
+
+ power-domain-names:
+ items:
+ - const: cx
+ - const: mx
+
+ resets:
+ items:
+ - description: AOSS restart
+ - description: PDC SYNC
+
+ reset-names:
+ items:
+ - const: restart
+ - const: pdc_sync
+
+ memory-region:
+ maxItems: 1
+ description: Reference to the reserved-memory for the Hexagon core
+
+ firmware-name:
+ $ref: /schemas/types.yaml#/definitions/string
+ description:
+ The name of the firmware which should be loaded for this remote
+ processor.
+
+ qcom,halt-regs:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description:
+ Phandle reference to a syscon representing TCSR followed by the
+ three offsets within syscon for q6, modem and nc halt registers.
+
+ qcom,qmp:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: Reference to the AOSS side-channel message RAM.
+
+ qcom,smem-states:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: States used by the AP to signal the Hexagon core
+ items:
+ - description: Stop the modem
+
+ qcom,smem-state-names:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: The names of the state bits used for SMP2P output
+ items:
+ - const: stop
+
+ glink-edge:
+ type: object
+ description:
+ Qualcomm G-Link subnode which represents communication edge, channels
+ and devices related to the ADSP.
+
+required:
+ - compatible
+ - reg
+ - interrupts-extended
+ - interrupt-names
+ - clocks
+ - clock-names
+ - power-domains
+ - power-domain-names
+ - reset
+ - reset-names
+ - qcom,halt-regs
+ - memory-region
+ - qcom,qmp
+ - qcom,smem-states
+ - qcom,smem-state-names
+ - glink-edge
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+ #include <dt-bindings/reset/qcom,sdm845-aoss.h>
+ #include <dt-bindings/reset/qcom,sdm845-pdc.h>
+ #include <dt-bindings/mailbox/qcom-ipcc.h>
+ remoteproc@8a00000 {
+ compatible = "qcom,sc7280-wpss-pil";
+ reg = <0x08a00000 0x10000>;
+
+ interrupts-extended = <&intc GIC_SPI 587 IRQ_TYPE_EDGE_RISING>,
+ <&wpss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&wpss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&wpss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&wpss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+ <&wpss_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready", "handover",
+ "stop-ack", "shutdown-ack";
+
+ clocks = <&gcc GCC_WPSS_AHB_BDG_MST_CLK>,
+ <&gcc GCC_WPSS_AHB_CLK>,
+ <&gcc GCC_WPSS_RSCP_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "ahb_bdg", "ahb",
+ "rscp", "xo";
+
+ power-domains = <&rpmhpd SC7280_CX>,
+ <&rpmhpd SC7280_MX>;
+ power-domain-names = "cx", "mx";
+
+ memory-region = <&wpss_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&wpss_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ resets = <&aoss_reset AOSS_CC_WCSS_RESTART>,
+ <&pdc_reset PDC_WPSS_SYNC_RESET>;
+ reset-names = "restart", "pdc_sync";
+
+ qcom,halt-regs = <&tcsr_mutex 0x37000>;
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_WPSS
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_WPSS
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "wpss";
+ qcom,remote-pid = <13>;
+ };
+ };
--
2.7.4
^ permalink raw reply related [flat|nested] 11+ messages in thread* Re: [PATCH v7 2/3] dt-bindings: remoteproc: qcom: Add SC7280 WPSS support
2021-10-28 8:13 ` [PATCH v7 2/3] dt-bindings: remoteproc: qcom: Add SC7280 WPSS support Rakesh Pillai
@ 2021-10-28 22:08 ` Stephen Boyd
2021-10-29 10:46 ` pillair
2021-11-02 14:26 ` Rob Herring
0 siblings, 2 replies; 11+ messages in thread
From: Stephen Boyd @ 2021-10-28 22:08 UTC (permalink / raw)
To: Rakesh Pillai, agross, bjorn.andersson, mathieu.poirier, ohad,
p.zabel, robh+dt
Cc: linux-arm-msm, linux-remoteproc, devicetree, linux-kernel, sibis,
mpubbise, kuabhs
Quoting Rakesh Pillai (2021-10-28 01:13:36)
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
> new file mode 100644
> index 0000000..96d11a4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
> @@ -0,0 +1,194 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/remoteproc/qcom,sc7280-wpss-pil.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm SC7280 WPSS Peripheral Image Loader
> +
> +maintainers:
> + - Bjorn Andersson <bjorn.andersson@linaro.org>
> +
> +description:
> + This document defines the binding for a component that loads and boots firmware
> + on the Qualcomm Technology Inc. WPSS.
> +
> +properties:
> + compatible:
> + enum:
> + - qcom,sc7280-wpss-pil
> +
> + reg:
> + maxItems: 1
> + description:
> + The base address and size of the qdsp6ss register
> +
> + interrupts:
> + items:
> + - description: Watchdog interrupt
> + - description: Fatal interrupt
> + - description: Ready interrupt
> + - description: Handover interrupt
> + - description: Stop acknowledge interrupt
> + - description: Shutdown acknowledge interrupt
> +
> + interrupt-names:
> + items:
> + - const: wdog
> + - const: fatal
> + - const: ready
> + - const: handover
> + - const: stop-ack
> + - const: shutdown-ack
> +
> + clocks:
> + items:
> + - description: GCC WPSS AHB BDG Master clock
> + - description: GCC WPSS AHB clock
> + - description: GCC WPSS RSCP clock
> + - description: XO clock
> +
> + clock-names:
> + items:
> + - const: ahb_bdg
> + - const: ahb
> + - const: rscp
> + - const: xo
> +
> + power-domains:
> + items:
> + - description: CX power domain
> + - description: MX power domain
> +
> + power-domain-names:
> + items:
> + - const: cx
> + - const: mx
> +
> + resets:
> + items:
> + - description: AOSS restart
> + - description: PDC SYNC
> +
> + reset-names:
> + items:
> + - const: restart
> + - const: pdc_sync
> +
> + memory-region:
Does it need
$ref: /schemas/types.yaml#/definitions/phandle
because it's a phandle?
> + maxItems: 1
> + description: Reference to the reserved-memory for the Hexagon core
> +
> + firmware-name:
> + $ref: /schemas/types.yaml#/definitions/string
> + description:
> + The name of the firmware which should be loaded for this remote
> + processor.
> +
> + qcom,halt-regs:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description:
> + Phandle reference to a syscon representing TCSR followed by the
> + three offsets within syscon for q6, modem and nc halt registers.
> +
> + qcom,qmp:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description: Reference to the AOSS side-channel message RAM.
> +
> + qcom,smem-states:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description: States used by the AP to signal the Hexagon core
> + items:
> + - description: Stop the modem
> +
> + qcom,smem-state-names:
> + $ref: /schemas/types.yaml#/definitions/string
> + description: The names of the state bits used for SMP2P output
> + items:
> + - const: stop
> +
> + glink-edge:
> + type: object
> + description:
> + Qualcomm G-Link subnode which represents communication edge, channels
> + and devices related to the ADSP.
Any properties of glink-edge that are required?
> +
> +required:
> + - compatible
> + - reg
> + - interrupts-extended
interrupts
> + - interrupt-names
> + - clocks
> + - clock-names
> + - power-domains
> + - power-domain-names
> + - reset
> + - reset-names
> + - qcom,halt-regs
> + - memory-region
> + - qcom,qmp
> + - qcom,smem-states
> + - qcom,smem-state-names
> + - glink-edge
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/clock/qcom,gcc-sc7280.h>
> + #include <dt-bindings/clock/qcom,rpmh.h>
> + #include <dt-bindings/power/qcom-rpmpd.h>
> + #include <dt-bindings/reset/qcom,sdm845-aoss.h>
> + #include <dt-bindings/reset/qcom,sdm845-pdc.h>
> + #include <dt-bindings/mailbox/qcom-ipcc.h>
> + remoteproc@8a00000 {
> + compatible = "qcom,sc7280-wpss-pil";
> + reg = <0x08a00000 0x10000>;
> +
> + interrupts-extended = <&intc GIC_SPI 587 IRQ_TYPE_EDGE_RISING>,
> + <&wpss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> + <&wpss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> + <&wpss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> + <&wpss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
> + <&wpss_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "wdog", "fatal", "ready", "handover",
> + "stop-ack", "shutdown-ack";
> +
> + clocks = <&gcc GCC_WPSS_AHB_BDG_MST_CLK>,
> + <&gcc GCC_WPSS_AHB_CLK>,
> + <&gcc GCC_WPSS_RSCP_CLK>,
> + <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "ahb_bdg", "ahb",
> + "rscp", "xo";
> +
> + power-domains = <&rpmhpd SC7280_CX>,
> + <&rpmhpd SC7280_MX>;
> + power-domain-names = "cx", "mx";
> +
> + memory-region = <&wpss_mem>;
> +
> + qcom,qmp = <&aoss_qmp>;
> +
> + qcom,smem-states = <&wpss_smp2p_out 0>;
> + qcom,smem-state-names = "stop";
> +
> + resets = <&aoss_reset AOSS_CC_WCSS_RESTART>,
> + <&pdc_reset PDC_WPSS_SYNC_RESET>;
> + reset-names = "restart", "pdc_sync";
> +
> + qcom,halt-regs = <&tcsr_mutex 0x37000>;
> +
> + status = "disabled";
status can be left out of examples.
> +
> + glink-edge {
> + interrupts-extended = <&ipcc IPCC_CLIENT_WPSS
> + IPCC_MPROC_SIGNAL_GLINK_QMP
> + IRQ_TYPE_EDGE_RISING>;
> + mboxes = <&ipcc IPCC_CLIENT_WPSS
> + IPCC_MPROC_SIGNAL_GLINK_QMP>;
> +
> + label = "wpss";
> + qcom,remote-pid = <13>;
There are a few properties here that don't seem to be required. Is that
intentional?
^ permalink raw reply [flat|nested] 11+ messages in thread* RE: [PATCH v7 2/3] dt-bindings: remoteproc: qcom: Add SC7280 WPSS support
2021-10-28 22:08 ` Stephen Boyd
@ 2021-10-29 10:46 ` pillair
2021-10-29 19:04 ` Stephen Boyd
2021-11-02 14:26 ` Rob Herring
1 sibling, 1 reply; 11+ messages in thread
From: pillair @ 2021-10-29 10:46 UTC (permalink / raw)
To: 'Stephen Boyd',
agross, bjorn.andersson, mathieu.poirier, ohad, p.zabel, robh+dt
Cc: linux-arm-msm, linux-remoteproc, devicetree, linux-kernel, sibis,
mpubbise, kuabhs
> -----Original Message-----
> From: Stephen Boyd <swboyd@chromium.org>
> Sent: Friday, October 29, 2021 3:38 AM
> To: Rakesh Pillai <pillair@codeaurora.org>; agross@kernel.org;
> bjorn.andersson@linaro.org; mathieu.poirier@linaro.org; ohad@wizery.com;
> p.zabel@pengutronix.de; robh+dt@kernel.org
> Cc: linux-arm-msm@vger.kernel.org; linux-remoteproc@vger.kernel.org;
> devicetree@vger.kernel.org; linux-kernel@vger.kernel.org;
> sibis@codeaurora.org; mpubbise@codeaurora.org; kuabhs@chromium.org
> Subject: Re: [PATCH v7 2/3] dt-bindings: remoteproc: qcom: Add SC7280
> WPSS support
>
> > +
> > + glink-edge {
> > + interrupts-extended = <&ipcc IPCC_CLIENT_WPSS
> > + IPCC_MPROC_SIGNAL_GLINK_QMP
> > + IRQ_TYPE_EDGE_RISING>;
> > + mboxes = <&ipcc IPCC_CLIENT_WPSS
> > + IPCC_MPROC_SIGNAL_GLINK_QMP>;
> > +
> > + label = "wpss";
> > + qcom,remote-pid = <13>;
>
> There are a few properties here that don't seem to be required. Is that
> intentional?
Hi Stephen,
All the properties in the example are listed as required (except for status, which will be removed in the subsequent patchset).
Do you mean the glink-edge node properties ?
Thanks,
Rakesh Pillai.
^ permalink raw reply [flat|nested] 11+ messages in thread* RE: [PATCH v7 2/3] dt-bindings: remoteproc: qcom: Add SC7280 WPSS support
2021-10-29 10:46 ` pillair
@ 2021-10-29 19:04 ` Stephen Boyd
2021-11-02 13:45 ` pillair
0 siblings, 1 reply; 11+ messages in thread
From: Stephen Boyd @ 2021-10-29 19:04 UTC (permalink / raw)
To: agross, bjorn.andersson, mathieu.poirier, ohad, p.zabel, pillair,
robh+dt
Cc: linux-arm-msm, linux-remoteproc, devicetree, linux-kernel, sibis,
mpubbise, kuabhs
Quoting pillair@codeaurora.org (2021-10-29 03:46:03)
>
> > > +
> > > + glink-edge {
> > > + interrupts-extended = <&ipcc IPCC_CLIENT_WPSS
> > > + IPCC_MPROC_SIGNAL_GLINK_QMP
> > > + IRQ_TYPE_EDGE_RISING>;
> > > + mboxes = <&ipcc IPCC_CLIENT_WPSS
> > > + IPCC_MPROC_SIGNAL_GLINK_QMP>;
> > > +
> > > + label = "wpss";
> > > + qcom,remote-pid = <13>;
> >
> > There are a few properties here that don't seem to be required. Is that
> > intentional?
>
> Hi Stephen,
> All the properties in the example are listed as required (except for status, which will be removed in the subsequent patchset).
> Do you mean the glink-edge node properties ?
Yes I mean all the properties in the glink-edge node. Are they required?
If so then we need to list them in the schema.
^ permalink raw reply [flat|nested] 11+ messages in thread* RE: [PATCH v7 2/3] dt-bindings: remoteproc: qcom: Add SC7280 WPSS support
2021-10-29 19:04 ` Stephen Boyd
@ 2021-11-02 13:45 ` pillair
0 siblings, 0 replies; 11+ messages in thread
From: pillair @ 2021-11-02 13:45 UTC (permalink / raw)
To: 'Stephen Boyd',
agross, bjorn.andersson, mathieu.poirier, ohad, p.zabel, robh+dt
Cc: linux-arm-msm, linux-remoteproc, devicetree, linux-kernel, sibis,
mpubbise, kuabhs
> -----Original Message-----
> From: Stephen Boyd <swboyd@chromium.org>
> Sent: Saturday, October 30, 2021 12:34 AM
> To: agross@kernel.org; bjorn.andersson@linaro.org;
> mathieu.poirier@linaro.org; ohad@wizery.com; p.zabel@pengutronix.de;
> pillair@codeaurora.org; robh+dt@kernel.org
> Cc: linux-arm-msm@vger.kernel.org; linux-remoteproc@vger.kernel.org;
> devicetree@vger.kernel.org; linux-kernel@vger.kernel.org;
> sibis@codeaurora.org; mpubbise@codeaurora.org; kuabhs@chromium.org
> Subject: RE: [PATCH v7 2/3] dt-bindings: remoteproc: qcom: Add SC7280
> WPSS support
>
> Quoting pillair@codeaurora.org (2021-10-29 03:46:03)
> >
> > > > +
> > > > + glink-edge {
> > > > + interrupts-extended = <&ipcc IPCC_CLIENT_WPSS
> > > > + IPCC_MPROC_SIGNAL_GLINK_QMP
> > > > + IRQ_TYPE_EDGE_RISING>;
> > > > + mboxes = <&ipcc IPCC_CLIENT_WPSS
> > > > + IPCC_MPROC_SIGNAL_GLINK_QMP>;
> > > > +
> > > > + label = "wpss";
> > > > + qcom,remote-pid = <13>;
> > >
> > > There are a few properties here that don't seem to be required. Is
> > > that intentional?
> >
> > Hi Stephen,
> > All the properties in the example are listed as required (except for status,
> which will be removed in the subsequent patchset).
> > Do you mean the glink-edge node properties ?
>
> Yes I mean all the properties in the glink-edge node. Are they required?
> If so then we need to list them in the schema.
Hi Stephen,
I have sent v8 with glink-edge properties also included in the dt-bindings.
Thanks,
Rakesh Pillai.
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v7 2/3] dt-bindings: remoteproc: qcom: Add SC7280 WPSS support
2021-10-28 22:08 ` Stephen Boyd
2021-10-29 10:46 ` pillair
@ 2021-11-02 14:26 ` Rob Herring
1 sibling, 0 replies; 11+ messages in thread
From: Rob Herring @ 2021-11-02 14:26 UTC (permalink / raw)
To: Stephen Boyd
Cc: Rakesh Pillai, agross, bjorn.andersson, mathieu.poirier, ohad,
p.zabel, linux-arm-msm, linux-remoteproc, devicetree,
linux-kernel, sibis, mpubbise, kuabhs
On Thu, Oct 28, 2021 at 03:08:24PM -0700, Stephen Boyd wrote:
> Quoting Rakesh Pillai (2021-10-28 01:13:36)
> > diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
> > new file mode 100644
> > index 0000000..96d11a4
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
> > @@ -0,0 +1,194 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/remoteproc/qcom,sc7280-wpss-pil.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Qualcomm SC7280 WPSS Peripheral Image Loader
> > +
> > +maintainers:
> > + - Bjorn Andersson <bjorn.andersson@linaro.org>
> > +
> > +description:
> > + This document defines the binding for a component that loads and boots firmware
> > + on the Qualcomm Technology Inc. WPSS.
> > +
> > +properties:
> > + compatible:
> > + enum:
> > + - qcom,sc7280-wpss-pil
> > +
> > + reg:
> > + maxItems: 1
> > + description:
> > + The base address and size of the qdsp6ss register
> > +
> > + interrupts:
> > + items:
> > + - description: Watchdog interrupt
> > + - description: Fatal interrupt
> > + - description: Ready interrupt
> > + - description: Handover interrupt
> > + - description: Stop acknowledge interrupt
> > + - description: Shutdown acknowledge interrupt
> > +
> > + interrupt-names:
> > + items:
> > + - const: wdog
> > + - const: fatal
> > + - const: ready
> > + - const: handover
> > + - const: stop-ack
> > + - const: shutdown-ack
> > +
> > + clocks:
> > + items:
> > + - description: GCC WPSS AHB BDG Master clock
> > + - description: GCC WPSS AHB clock
> > + - description: GCC WPSS RSCP clock
> > + - description: XO clock
> > +
> > + clock-names:
> > + items:
> > + - const: ahb_bdg
> > + - const: ahb
> > + - const: rscp
> > + - const: xo
> > +
> > + power-domains:
> > + items:
> > + - description: CX power domain
> > + - description: MX power domain
> > +
> > + power-domain-names:
> > + items:
> > + - const: cx
> > + - const: mx
> > +
> > + resets:
> > + items:
> > + - description: AOSS restart
> > + - description: PDC SYNC
> > +
> > + reset-names:
> > + items:
> > + - const: restart
> > + - const: pdc_sync
> > +
> > + memory-region:
>
> Does it need
>
> $ref: /schemas/types.yaml#/definitions/phandle
>
> because it's a phandle?
No, standard property that already has a type.
Rob
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v7 3/3] remoteproc: qcom: q6v5_wpss: Add support for sc7280 WPSS
2021-10-28 8:13 [PATCH v7 0/3] Add support for sc7280 WPSS PIL loading Rakesh Pillai
2021-10-28 8:13 ` [PATCH v7 1/3] dt-bindings: remoteproc: qcom: adsp: Convert binding to YAML Rakesh Pillai
2021-10-28 8:13 ` [PATCH v7 2/3] dt-bindings: remoteproc: qcom: Add SC7280 WPSS support Rakesh Pillai
@ 2021-10-28 8:13 ` Rakesh Pillai
2021-10-28 22:12 ` Stephen Boyd
2 siblings, 1 reply; 11+ messages in thread
From: Rakesh Pillai @ 2021-10-28 8:13 UTC (permalink / raw)
To: agross, bjorn.andersson, ohad, mathieu.poirier, robh+dt, p.zabel
Cc: swboyd, linux-arm-msm, linux-remoteproc, devicetree,
linux-kernel, sibis, mpubbise, kuabhs, Rakesh Pillai
Add support for PIL loading of WPSS processor for SC7280
- WPSS boot will be requested by the wifi driver and hence
disable auto-boot for WPSS.
- Add a separate shutdown sequence handler for WPSS.
- Add multiple power-domain voting support
- Parse firmware-name from dtsi entry
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
---
drivers/remoteproc/qcom_q6v5_adsp.c | 219 +++++++++++++++++++++++++++++++++---
1 file changed, 203 insertions(+), 16 deletions(-)
diff --git a/drivers/remoteproc/qcom_q6v5_adsp.c b/drivers/remoteproc/qcom_q6v5_adsp.c
index 098362e6..7d07e79 100644
--- a/drivers/remoteproc/qcom_q6v5_adsp.c
+++ b/drivers/remoteproc/qcom_q6v5_adsp.c
@@ -32,6 +32,7 @@
/* time out value */
#define ACK_TIMEOUT 1000
+#define ACK_TIMEOUT_US 1000000
#define BOOT_FSM_TIMEOUT 10000
/* mask values */
#define EVB_MASK GENMASK(27, 4)
@@ -51,6 +52,8 @@
#define QDSP6SS_CORE_CBCR 0x20
#define QDSP6SS_SLEEP_CBCR 0x3c
+#define QCOM_Q6V5_RPROC_PROXY_PD_MAX 3
+
struct adsp_pil_data {
int crash_reason_smem;
const char *firmware_name;
@@ -58,9 +61,13 @@ struct adsp_pil_data {
const char *ssr_name;
const char *sysmon_name;
int ssctl_id;
+ bool is_wpss;
+ bool auto_boot;
const char **clk_ids;
int num_clks;
+ const char **proxy_pd_names;
+ const char *load_state;
};
struct qcom_adsp {
@@ -93,11 +100,143 @@ struct qcom_adsp {
void *mem_region;
size_t mem_size;
+ struct device *proxy_pds[QCOM_Q6V5_RPROC_PROXY_PD_MAX];
+ int proxy_pd_count;
+
struct qcom_rproc_glink glink_subdev;
struct qcom_rproc_ssr ssr_subdev;
struct qcom_sysmon *sysmon;
+
+ int (*shutdown)(struct qcom_adsp *adsp);
};
+static int qcom_rproc_pds_attach(struct device *dev, struct device **devs,
+ const char **pd_names)
+{
+ size_t num_pds = 0;
+ int ret;
+ int i;
+
+ if (!pd_names)
+ return 0;
+
+ /* Handle single power domain */
+ if (dev->pm_domain) {
+ devs[0] = dev;
+ pm_runtime_enable(dev);
+ return 1;
+ }
+
+ while (pd_names[num_pds])
+ num_pds++;
+
+ for (i = 0; i < num_pds; i++) {
+ devs[i] = dev_pm_domain_attach_by_name(dev, pd_names[i]);
+ if (IS_ERR_OR_NULL(devs[i])) {
+ ret = PTR_ERR(devs[i]) ? : -ENODATA;
+ goto unroll_attach;
+ }
+ }
+
+ return num_pds;
+
+unroll_attach:
+ for (i--; i >= 0; i--)
+ dev_pm_domain_detach(devs[i], false);
+
+ return ret;
+}
+
+static void qcom_rproc_pds_detach(struct qcom_adsp *adsp, struct device **pds,
+ size_t pd_count)
+{
+ struct device *dev = adsp->dev;
+ int i;
+
+ /* Handle single power domain */
+ if (dev->pm_domain && pd_count) {
+ pm_runtime_disable(dev);
+ return;
+ }
+
+ for (i = 0; i < pd_count; i++)
+ dev_pm_domain_detach(pds[i], false);
+}
+
+static int qcom_rproc_pds_enable(struct qcom_adsp *adsp, struct device **pds,
+ size_t pd_count)
+{
+ int ret;
+ int i;
+
+ for (i = 0; i < pd_count; i++) {
+ dev_pm_genpd_set_performance_state(pds[i], INT_MAX);
+ ret = pm_runtime_get_sync(pds[i]);
+ if (ret < 0) {
+ pm_runtime_put_noidle(pds[i]);
+ dev_pm_genpd_set_performance_state(pds[i], 0);
+ goto unroll_pd_votes;
+ }
+ }
+
+ return 0;
+
+unroll_pd_votes:
+ for (i--; i >= 0; i--) {
+ dev_pm_genpd_set_performance_state(pds[i], 0);
+ pm_runtime_put(pds[i]);
+ }
+
+ return ret;
+}
+
+static void qcom_rproc_pds_disable(struct qcom_adsp *adsp, struct device **pds,
+ size_t pd_count)
+{
+ int i;
+
+ for (i = 0; i < pd_count; i++) {
+ dev_pm_genpd_set_performance_state(pds[i], 0);
+ pm_runtime_put(pds[i]);
+ }
+}
+
+static int qcom_wpss_shutdown(struct qcom_adsp *adsp)
+{
+ unsigned int val;
+
+ regmap_write(adsp->halt_map, adsp->halt_lpass + LPASS_HALTREQ_REG, 1);
+
+ /* Wait for halt ACK from QDSP6 */
+ regmap_read_poll_timeout(adsp->halt_map,
+ adsp->halt_lpass + LPASS_HALTACK_REG, val,
+ val, 1000, ACK_TIMEOUT_US);
+
+ /* Assert the WPSS PDC Reset */
+ reset_control_assert(adsp->pdc_sync_reset);
+ /* Place the WPSS processor into reset */
+ reset_control_assert(adsp->restart);
+ /* wait after asserting subsystem restart from AOSS */
+ usleep_range(200, 205);
+ /* Remove the WPSS reset */
+ reset_control_deassert(adsp->restart);
+ /* De-assert the WPSS PDC Reset */
+ reset_control_deassert(adsp->pdc_sync_reset);
+
+ usleep_range(100, 105);
+
+ clk_bulk_disable_unprepare(adsp->num_clks, adsp->clks);
+
+ regmap_write(adsp->halt_map, adsp->halt_lpass + LPASS_HALTREQ_REG, 0);
+
+ /* Wait for halt ACK from QDSP6 */
+ regmap_read_poll_timeout(adsp->halt_map,
+ adsp->halt_lpass + LPASS_HALTACK_REG, val,
+ !val, 1000, ACK_TIMEOUT_US);
+
+ return 0;
+}
+
static int qcom_adsp_shutdown(struct qcom_adsp *adsp)
{
unsigned long timeout;
@@ -193,12 +332,10 @@ static int adsp_start(struct rproc *rproc)
if (ret)
goto disable_irqs;
- dev_pm_genpd_set_performance_state(adsp->dev, INT_MAX);
- ret = pm_runtime_get_sync(adsp->dev);
- if (ret) {
- pm_runtime_put_noidle(adsp->dev);
+ ret = qcom_rproc_pds_enable(adsp, adsp->proxy_pds,
+ adsp->proxy_pd_count);
+ if (ret < 0)
goto disable_xo_clk;
- }
ret = clk_bulk_prepare_enable(adsp->num_clks, adsp->clks);
if (ret) {
@@ -243,8 +380,7 @@ static int adsp_start(struct rproc *rproc)
disable_adsp_clks:
clk_bulk_disable_unprepare(adsp->num_clks, adsp->clks);
disable_power_domain:
- dev_pm_genpd_set_performance_state(adsp->dev, 0);
- pm_runtime_put(adsp->dev);
+ qcom_rproc_pds_disable(adsp, adsp->proxy_pds, adsp->proxy_pd_count);
disable_xo_clk:
clk_disable_unprepare(adsp->xo);
disable_irqs:
@@ -258,8 +394,7 @@ static void qcom_adsp_pil_handover(struct qcom_q6v5 *q6v5)
struct qcom_adsp *adsp = container_of(q6v5, struct qcom_adsp, q6v5);
clk_disable_unprepare(adsp->xo);
- dev_pm_genpd_set_performance_state(adsp->dev, 0);
- pm_runtime_put(adsp->dev);
+ qcom_rproc_pds_disable(adsp, adsp->proxy_pds, adsp->proxy_pd_count);
}
static int adsp_stop(struct rproc *rproc)
@@ -272,7 +407,7 @@ static int adsp_stop(struct rproc *rproc)
if (ret == -ETIMEDOUT)
dev_err(adsp->dev, "timed out on wait\n");
- ret = qcom_adsp_shutdown(adsp);
+ ret = adsp->shutdown(adsp);
if (ret)
dev_err(adsp->dev, "failed to shutdown: %d\n", ret);
@@ -427,6 +562,7 @@ static int adsp_alloc_memory_region(struct qcom_adsp *adsp)
static int adsp_probe(struct platform_device *pdev)
{
const struct adsp_pil_data *desc;
+ const char *firmware_name;
struct qcom_adsp *adsp;
struct rproc *rproc;
int ret;
@@ -435,12 +571,22 @@ static int adsp_probe(struct platform_device *pdev)
if (!desc)
return -EINVAL;
+ firmware_name = desc->firmware_name;
+ ret = of_property_read_string(pdev->dev.of_node, "firmware-name",
+ &firmware_name);
+ if (ret < 0 && ret != -EINVAL) {
+ dev_err(&pdev->dev, "unable to read firmware-name\n");
+ return ret;
+ }
+
rproc = rproc_alloc(&pdev->dev, pdev->name, &adsp_ops,
- desc->firmware_name, sizeof(*adsp));
+ firmware_name, sizeof(*adsp));
if (!rproc) {
dev_err(&pdev->dev, "unable to allocate remoteproc\n");
return -ENOMEM;
}
+
+ rproc->auto_boot = desc->auto_boot;
rproc_coredump_set_elf_info(rproc, ELFCLASS32, EM_NONE);
adsp = (struct qcom_adsp *)rproc->priv;
@@ -449,6 +595,11 @@ static int adsp_probe(struct platform_device *pdev)
adsp->info_name = desc->sysmon_name;
platform_set_drvdata(pdev, adsp);
+ if (desc->is_wpss)
+ adsp->shutdown = qcom_wpss_shutdown;
+ else
+ adsp->shutdown = qcom_adsp_shutdown;
+
ret = adsp_alloc_memory_region(adsp);
if (ret)
goto free_rproc;
@@ -457,7 +608,13 @@ static int adsp_probe(struct platform_device *pdev)
if (ret)
goto free_rproc;
- pm_runtime_enable(adsp->dev);
+ ret = qcom_rproc_pds_attach(adsp->dev, adsp->proxy_pds,
+ desc->proxy_pd_names);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to attach proxy power domains\n");
+ goto free_rproc;
+ }
+ adsp->proxy_pd_count = ret;
ret = adsp_init_reset(adsp);
if (ret)
@@ -467,8 +624,8 @@ static int adsp_probe(struct platform_device *pdev)
if (ret)
goto disable_pm;
- ret = qcom_q6v5_init(&adsp->q6v5, pdev, rproc, desc->crash_reason_smem, NULL,
- qcom_adsp_pil_handover);
+ ret = qcom_q6v5_init(&adsp->q6v5, pdev, rproc, desc->crash_reason_smem,
+ desc->load_state, qcom_adsp_pil_handover);
if (ret)
goto disable_pm;
@@ -489,7 +646,8 @@ static int adsp_probe(struct platform_device *pdev)
return 0;
disable_pm:
- pm_runtime_disable(adsp->dev);
+ qcom_rproc_pds_detach(adsp, adsp->proxy_pds, adsp->proxy_pd_count);
+
free_rproc:
rproc_free(rproc);
@@ -506,7 +664,7 @@ static int adsp_remove(struct platform_device *pdev)
qcom_remove_glink_subdev(adsp->rproc, &adsp->glink_subdev);
qcom_remove_sysmon_subdev(adsp->sysmon);
qcom_remove_ssr_subdev(adsp->rproc, &adsp->ssr_subdev);
- pm_runtime_disable(adsp->dev);
+ qcom_rproc_pds_detach(adsp, adsp->proxy_pds, adsp->proxy_pd_count);
rproc_free(adsp->rproc);
return 0;
@@ -518,11 +676,16 @@ static const struct adsp_pil_data adsp_resource_init = {
.ssr_name = "lpass",
.sysmon_name = "adsp",
.ssctl_id = 0x14,
+ .is_wpss = false,
+ .auto_boot = true,
.clk_ids = (const char*[]) {
"sway_cbcr", "lpass_ahbs_aon_cbcr", "lpass_ahbm_aon_cbcr",
"qdsp6ss_xo", "qdsp6ss_sleep", "qdsp6ss_core", NULL
},
.num_clks = 7,
+ .proxy_pd_names = (const char*[]) {
+ "cx", NULL
+ },
};
static const struct adsp_pil_data cdsp_resource_init = {
@@ -531,15 +694,39 @@ static const struct adsp_pil_data cdsp_resource_init = {
.ssr_name = "cdsp",
.sysmon_name = "cdsp",
.ssctl_id = 0x17,
+ .is_wpss = false,
+ .auto_boot = true,
.clk_ids = (const char*[]) {
"sway", "tbu", "bimc", "ahb_aon", "q6ss_slave", "q6ss_master",
"q6_axim", NULL
},
.num_clks = 7,
+ .proxy_pd_names = (const char*[]) {
+ "cx", NULL
+ },
+};
+
+static const struct adsp_pil_data wpss_resource_init = {
+ .crash_reason_smem = 626,
+ .firmware_name = "wpss.mdt",
+ .ssr_name = "wpss",
+ .sysmon_name = "wpss",
+ .ssctl_id = 0x19,
+ .is_wpss = true,
+ .auto_boot = false,
+ .load_state = "wpss",
+ .clk_ids = (const char*[]) {
+ "ahb_bdg", "ahb", "rscp", NULL
+ },
+ .num_clks = 3,
+ .proxy_pd_names = (const char*[]) {
+ "cx", "mx", NULL
+ },
};
static const struct of_device_id adsp_of_match[] = {
{ .compatible = "qcom,qcs404-cdsp-pil", .data = &cdsp_resource_init },
+ { .compatible = "qcom,sc7280-wpss-pil", .data = &wpss_resource_init },
{ .compatible = "qcom,sdm845-adsp-pil", .data = &adsp_resource_init },
{ },
};
--
2.7.4
^ permalink raw reply related [flat|nested] 11+ messages in thread* Re: [PATCH v7 3/3] remoteproc: qcom: q6v5_wpss: Add support for sc7280 WPSS
2021-10-28 8:13 ` [PATCH v7 3/3] remoteproc: qcom: q6v5_wpss: Add support for sc7280 WPSS Rakesh Pillai
@ 2021-10-28 22:12 ` Stephen Boyd
0 siblings, 0 replies; 11+ messages in thread
From: Stephen Boyd @ 2021-10-28 22:12 UTC (permalink / raw)
To: Rakesh Pillai, agross, bjorn.andersson, mathieu.poirier, ohad,
p.zabel, robh+dt
Cc: linux-arm-msm, linux-remoteproc, devicetree, linux-kernel, sibis,
mpubbise, kuabhs
Quoting Rakesh Pillai (2021-10-28 01:13:37)
> diff --git a/drivers/remoteproc/qcom_q6v5_adsp.c b/drivers/remoteproc/qcom_q6v5_adsp.c
> index 098362e6..7d07e79 100644
> --- a/drivers/remoteproc/qcom_q6v5_adsp.c
> +++ b/drivers/remoteproc/qcom_q6v5_adsp.c
> @@ -93,11 +100,143 @@ struct qcom_adsp {
> void *mem_region;
> size_t mem_size;
>
> + struct device *proxy_pds[QCOM_Q6V5_RPROC_PROXY_PD_MAX];
> + int proxy_pd_count;
size_t?
> +
> struct qcom_rproc_glink glink_subdev;
> struct qcom_rproc_ssr ssr_subdev;
> struct qcom_sysmon *sysmon;
> +
> + int (*shutdown)(struct qcom_adsp *adsp);
> };
>
^ permalink raw reply [flat|nested] 11+ messages in thread