From: Yinghai Lu <yinghai@kernel.org>
To: Bjorn Helgaas <helgaas@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Bjorn Helgaas <bhelgaas@google.com>,
David Miller <davem@davemloft.net>,
Linus Torvalds <torvalds@linux-foundation.org>,
Wei Yang <weiyang@linux.vnet.ibm.com>, TJ <linux@iam.tj>,
Yijing Wang <wangyijing@huawei.com>,
Khalid Aziz <khalid.aziz@oracle.com>,
"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Michael Ellerman <mpe@ellerman.id.au>
Subject: Re: [PATCH v11 04/60] sparc/PCI: Use correct offset for bus address to resource
Date: Tue, 3 May 2016 22:08:07 -0700 [thread overview]
Message-ID: <CAE9FiQU=e2bf=+KDrOETf_T-KPLQsSDiG5GqVFqgtvSWXwUz4w@mail.gmail.com> (raw)
In-Reply-To: <20160504012531.GB17170@localhost>
On Tue, May 3, 2016 at 6:25 PM, Bjorn Helgaas <helgaas@kernel.org> wrote:
> On Wed, May 04, 2016 at 10:37:40AM +1000, Benjamin Herrenschmidt wrote:
>>
>> The problem tends to be old Xserver expectations...
>>
>> That stuff has been a can of worms over the years and we did things in
>> the kernel to work around X limitations. I'm not that keen on touching
>> /proc at all in that regard. Leave it there do what it does today, it's
>> a user visible ABI, don't change it.
>
> I did not propose changing any user-visible ABI. To recap what I did
> propose:
I want to avoid introduce one strange pci_user_to_resource.
>
> - The sysfs path uses offsets between 0 and BAR size on all arches.
> It uses pci_resource_to_user() today, but I think it should not.
>
> - The procfs path uses offsets of resource values (CPU physical
> addresses) on most architectures, but uses something else, e.g.,
> BAR values, on others. pci_resource_to_user() does this
> translation. The procfs path does not use pci_resource_to_user()
> today, but I think it should.
current powerpc pci_resource_to_user is strange:
it will return resource start for io mem.
but will return BAR (?) start for io port.
sparc pci_resource_to_user does return BAR value for iomem.
>
> - This implies that pci_mmap_page_range() should deal with resource
> values (CPU physical addresses), and proc_bus_pci_mmap() should do
> any necessary arch-specific translation from BAR values to
> resource values.
so will need one different version pci_user_to_resource.
and can not use pcibios_bus_to_resource directly, and will be another mess.
Can you reconsider to keep the pci_mmap_page_range still use BAR value
and only touch pci_mmap_fits() ?
like i suggested before, and it does not conflict with the patchset.
Subject: [PATCH] PCI: Fix pci_mmap_fits() with proc interface
Passed value is user address, so need to compare it with
user addr that is converted from dev resource.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
drivers/pci/pci-sysfs.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
Index: linux-2.6/drivers/pci/pci-sysfs.c
===================================================================
--- linux-2.6.orig/drivers/pci/pci-sysfs.c
+++ linux-2.6/drivers/pci/pci-sysfs.c
@@ -969,15 +969,19 @@ void pci_remove_legacy_files(struct pci_
int pci_mmap_fits(struct pci_dev *pdev, int resno, struct vm_area_struct *vma,
enum pci_mmap_api mmap_api)
{
- unsigned long nr, start, size, pci_start;
+ unsigned long nr, start, size;
+ resource_size_t pci_start = 0, pci_end;
if (pci_resource_len(pdev, resno) == 0)
return 0;
nr = vma_pages(vma);
start = vma->vm_pgoff;
size = ((pci_resource_len(pdev, resno) - 1) >> PAGE_SHIFT) + 1;
- pci_start = (mmap_api == PCI_MMAP_PROCFS) ?
- pci_resource_start(pdev, resno) >> PAGE_SHIFT : 0;
+ if (mmap_api == PCI_MMAP_PROCFS) {
+ pci_resource_to_user(pdev, resno, &pdev->resource[resno],
+ &pci_start, &pci_end);
+ pci_start >>= PAGE_SHIFT;
+ }
if (start >= pci_start && start < pci_start + size &&
start + nr <= pci_start + size)
return 1;
next prev parent reply other threads:[~2016-05-04 5:08 UTC|newest]
Thread overview: 86+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-08 0:15 [PATCH v11 00/60] PCI: Resource allocation cleanup for v4.7 Yinghai Lu
2016-04-08 0:15 ` [PATCH v11 01/60] PCI: Fix iomem_is_exclusive() checking in pci_mmap_resource() Yinghai Lu
2016-04-08 0:15 ` [PATCH v11 02/60] alpha/PCI: Only check iomem_is_exclusive() for IORESOURCE_MEM, not IORESOURCE_IO Yinghai Lu
2016-04-25 21:01 ` Bjorn Helgaas
2016-04-08 0:15 ` [PATCH v11 03/60] PCI: Add pci_find_bus_resource() Yinghai Lu
2016-04-08 0:15 ` [PATCH v11 04/60] sparc/PCI: Use correct offset for bus address to resource Yinghai Lu
2016-04-22 20:49 ` Bjorn Helgaas
2016-04-28 4:55 ` Yinghai Lu
2016-04-28 13:56 ` Bjorn Helgaas
2016-04-29 7:19 ` Yinghai Lu
2016-05-03 22:52 ` Yinghai Lu
2016-05-04 0:37 ` Benjamin Herrenschmidt
2016-05-04 1:25 ` Bjorn Helgaas
2016-05-04 5:08 ` Yinghai Lu [this message]
2016-05-04 5:52 ` Yinghai Lu
2016-05-04 15:17 ` Bjorn Helgaas
2016-05-04 18:46 ` Yinghai Lu
2016-05-05 0:25 ` Yinghai Lu
2016-05-05 15:53 ` Yinghai Lu
2016-05-05 22:02 ` Benjamin Herrenschmidt
2016-05-06 0:56 ` Yinghai Lu
2016-05-06 4:18 ` Yinghai Lu
2016-05-06 18:26 ` Bjorn Helgaas
2016-05-10 6:18 ` Yinghai Lu
2016-05-04 4:17 ` David Miller
2016-04-08 0:15 ` [PATCH v11 05/60] sparc/PCI: Reserve legacy mmio after PCI mmio Yinghai Lu
2016-04-08 0:15 ` [PATCH v11 06/60] sparc/PCI: Add IORESOURCE_MEM_64 for 64-bit resource in OF parsing Yinghai Lu
2016-04-08 0:15 ` [PATCH v11 07/60] sparc/PCI: Keep resource idx order with bridge register number Yinghai Lu
2016-04-08 0:15 ` [PATCH v11 08/60] PCI: Kill wrong quirk about M7101 Yinghai Lu
2016-04-08 0:15 ` [PATCH v11 09/60] powerpc/PCI: Keep resource idx order with bridge register number Yinghai Lu
2016-04-08 0:15 ` [PATCH v11 10/60] powerpc/PCI: Add IORESOURCE_MEM_64 for 64-bit resource in OF parsing Yinghai Lu
2016-04-08 0:15 ` [PATCH v11 11/60] OF/PCI: Add IORESOURCE_MEM_64 for 64-bit resource Yinghai Lu
2016-04-08 0:15 ` [PATCH v11 12/60] PCI: Check pref compatible bit for mem64 resource of PCIe device Yinghai Lu
2016-04-08 0:15 ` [PATCH v11 13/60] PCI: Only treat non-pref mmio64 as pref if all bridges have MEM_64 Yinghai Lu
2016-04-08 0:15 ` [PATCH v11 14/60] PCI: Add has_mem64 for struct host_bridge Yinghai Lu
2016-04-08 0:15 ` [PATCH v11 15/60] PCI: Only treat non-pref mmio64 as pref if host bridge has mmio64 Yinghai Lu
2016-04-08 0:15 ` [PATCH v11 16/60] PCI: Restore pref MMIO allocation logic for host bridge without mmio64 Yinghai Lu
2016-04-08 0:15 ` [PATCH v11 17/60] PCI: Don't release fixed resource for realloc Yinghai Lu
2016-04-08 0:15 ` [PATCH v11 18/60] PCI: Claim fixed resource during remove/rescan path Yinghai Lu
2016-04-08 0:15 ` [PATCH v11 19/60] PCI: Set resource to FIXED for LSI devices Yinghai Lu
2016-04-08 0:15 ` [PATCH v11 20/60] PCI: Separate realloc list checking after allocation Yinghai Lu
2016-04-08 0:15 ` [PATCH v11 21/60] PCI: Treat optional as required in first try for bridge rescan Yinghai Lu
2016-04-08 0:15 ` [PATCH v11 22/60] PCI: Get new realloc size for bridge for last try Yinghai Lu
2016-04-08 0:15 ` [PATCH v11 23/60] PCI: Don't release sibling bridge resources during hotplug Yinghai Lu
2016-04-08 0:15 ` [PATCH v11 24/60] PCI: Cleanup res_to_dev_res() printout Yinghai Lu
2016-04-08 0:15 ` [PATCH v11 25/60] PCI: Reuse res_to_dev_res() in reassign_resources_sorted() Yinghai Lu
2016-04-08 0:15 ` [PATCH v11 26/60] PCI: Use correct align for optional only resources during sorting Yinghai Lu
2016-04-08 0:15 ` [PATCH v11 27/60] PCI: Optimize bus min_align/size calculation during sizing Yinghai Lu
2016-04-08 0:15 ` [PATCH v11 28/60] PCI: Optimize bus align/size calculation for optional " Yinghai Lu
2016-04-08 0:15 ` [PATCH v11 29/60] PCI: Don't add too much optional size for hotplug bridge MMIO Yinghai Lu
2016-04-08 0:15 ` [PATCH v11 30/60] PCI: Reorder resources list for required/optional resources Yinghai Lu
2016-04-08 0:15 ` [PATCH v11 31/60] PCI: Remove duplicated code for resource sorting Yinghai Lu
2016-04-08 0:15 ` [PATCH v11 32/60] PCI: Rename pdev_sort_resources() to pdev_assign_resources_prepare() Yinghai Lu
2016-04-08 0:15 ` [PATCH v11 33/60] PCI: Treat ROM resource as optional during realloc Yinghai Lu
2016-04-08 0:15 ` [PATCH v11 34/60] PCI: Add debug printout during releasing partial assigned resources Yinghai Lu
2016-04-08 0:15 ` [PATCH v11 35/60] PCI: Simplify res reference using in __assign_resources_sorted() Yinghai Lu
2016-04-08 0:15 ` [PATCH v11 36/60] PCI: Add __add_to_list() Yinghai Lu
2016-04-08 0:15 ` [PATCH v11 37/60] PCI: Cache window alignment value during bus sizing Yinghai Lu
2016-04-08 0:15 ` [PATCH v11 38/60] PCI: Check if resource is allocated before trying to assign one Yinghai Lu
2016-04-08 0:15 ` [PATCH v11 39/60] PCI: Separate out save_resources()/restore_resources() Yinghai Lu
2016-04-08 0:15 ` [PATCH v11 40/60] PCI: Move comment to pci_need_to_release() Yinghai Lu
2016-04-08 0:15 ` [PATCH v11 41/60] PCI: Separate required+optional assigning to another function Yinghai Lu
2016-04-08 0:15 ` [PATCH v11 42/60] PCI: Skip required+optional if there is no optional Yinghai Lu
2016-04-08 0:15 ` [PATCH v11 43/60] PCI: Move saved required resource list out of required+optional assigning Yinghai Lu
2016-04-08 0:15 ` [PATCH v11 44/60] PCI: Add alt_size ressource allocation support Yinghai Lu
2016-04-08 0:56 ` Linus Torvalds
2016-04-08 5:50 ` Yinghai Lu
2016-04-08 6:24 ` Benjamin Herrenschmidt
2016-04-08 0:15 ` [PATCH v11 45/60] PCI: Add support for more than two alt_size entries under same bridge Yinghai Lu
2016-04-08 0:15 ` [PATCH v11 46/60] PCI: Fix size calculation with old_size on rescan path Yinghai Lu
2016-04-08 0:16 ` [PATCH v11 47/60] PCI: Don't add too much optional size for hotplug bridge io Yinghai Lu
2016-04-08 0:16 ` [PATCH v11 48/60] PCI: Move ISA io port align out of calculate_iosize() Yinghai Lu
2016-04-08 0:16 ` [PATCH v11 49/60] PCI: Don't add too much io port for hotplug bridge with old size Yinghai Lu
2016-04-08 0:16 ` [PATCH v11 50/60] PCI: Unify calculate_size() for io port and MMIO Yinghai Lu
2016-04-08 0:16 ` [PATCH v11 51/60] PCI: Allow bridge optional only io port resource required size to be 0 Yinghai Lu
2016-04-08 0:16 ` [PATCH v11 52/60] PCI: Unify skip_ioresource_align() Yinghai Lu
2016-04-08 0:16 ` [PATCH v11 53/60] PCI: Kill macro checking for bus io port sizing Yinghai Lu
2016-04-08 0:16 ` [PATCH v11 54/60] resources: Make allocate_resource() return best fit resource Yinghai Lu
2016-04-08 0:16 ` [PATCH v11 55/60] PCI, x86: Allocate from high in available window for MMIO Yinghai Lu
2016-04-08 0:16 ` [PATCH v11 56/60] PCI: Add debug print out for min_align and alt_size Yinghai Lu
2016-04-08 0:16 ` [PATCH v11 57/60] PCI, x86: Add pci=assign_pref_bars to reallocate pref BARs Yinghai Lu
2016-04-08 0:16 ` [PATCH v11 58/60] PCI: Introduce resource_disabled() Yinghai Lu
2016-04-08 0:16 ` [PATCH v11 59/60] PCI: Don't set flags to 0 when assign resource fail Yinghai Lu
2016-04-08 0:16 ` [PATCH v11 60/60] PCI: Only try to assign io port only for root bus that support it Yinghai Lu
2016-04-08 0:51 ` [PATCH v11 00/60] PCI: Resource allocation cleanup for v4.7 Linus Torvalds
2016-04-09 5:29 ` Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAE9FiQU=e2bf=+KDrOETf_T-KPLQsSDiG5GqVFqgtvSWXwUz4w@mail.gmail.com' \
--to=yinghai@kernel.org \
--cc=benh@kernel.crashing.org \
--cc=bhelgaas@google.com \
--cc=davem@davemloft.net \
--cc=helgaas@kernel.org \
--cc=khalid.aziz@oracle.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux@iam.tj \
--cc=mpe@ellerman.id.au \
--cc=torvalds@linux-foundation.org \
--cc=wangyijing@huawei.com \
--cc=weiyang@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).