linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Yinghai Lu <yinghai@kernel.org>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>,
	David Miller <davem@davemloft.net>,
	Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Wei Yang <weiyang@linux.vnet.ibm.com>, TJ <linux@iam.tj>,
	Yijing Wang <wangyijing@huawei.com>,
	Khalid Aziz <khalid.aziz@oracle.com>,
	"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v11 44/60] PCI: Add alt_size ressource allocation support
Date: Thu, 7 Apr 2016 22:50:20 -0700	[thread overview]
Message-ID: <CAE9FiQVd0FzfGf0L6+DZWs+MULC7_sA6YAx+mvbeUrx+ZUSbDQ@mail.gmail.com> (raw)
In-Reply-To: <CA+55aFyhXkzU_-RXNKoh83gz8XKwNqdJmGATXa+-MhT7bzvn2w@mail.gmail.com>

On Thu, Apr 7, 2016 at 5:56 PM, Linus Torvalds
<torvalds@linux-foundation.org> wrote:
> I'm not excited about the whole "alternate aligment".
>
> Maybe the kernel should just accept the smaller alignment. If the
> minimum alignment we use is bigger than necessary, then we're just
> wrong about it, and perhaps we should just use the smaller alignment
> that the bios used.

Look like I did not make it clearly in this change log.

Current kernel code sizing is searching smallest alignment, so call it
min_align scheme.

Some bios is using different way: It use smallest size instead, but it
could have bigger alignment
than min_align, so I call it alt_size scheme.

PROs for min_align: it can be used to calculate upper parent bridges
easily and safely.
CONs for min_align: it could generate more bigger required size.

PROs for alt_size: it try to search smaller size, esp for under 4G mmio space.
CONs for alt_size: it could have much bigger alignment, and need to
calculate the upper
bridge alt_size carefully. We end it up with try out to search the
upper bridge alt_size.

Current min_align code still have other problem: it can not handle block that
size is bigger than alignment, and it would generate wrong/too big align/size.

In the patch set, We
1. fix the min_align scheme to use try out way to find right min_align even
block size if bigger than block alignment.
2. add alt_size scheme, it will search alt_size/alt_align, that have
smaller size
   a. compare that with min_align/min_size, if alt_size is not smaller
than min_size
       just dump alt_size. otherwise record alt_size.
   b. later if we fail to get allocation with min_align, we retry alt_size.

So we still keep the old way as usual, and only handle some extra
corner case like
1. BIOS use small size and big align allocation, and in kernel we are doing pci
device remove or rescan.
2. We have couple layers of bridges that min_align scheme is wasting space.
and we have tight mmio under 4G.

Please let me know if I describe it clearly this time, otherwise I
would extract sample output
from patches and post here.

Thanks

Yinghai

  reply	other threads:[~2016-04-08  5:50 UTC|newest]

Thread overview: 86+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-08  0:15 [PATCH v11 00/60] PCI: Resource allocation cleanup for v4.7 Yinghai Lu
2016-04-08  0:15 ` [PATCH v11 01/60] PCI: Fix iomem_is_exclusive() checking in pci_mmap_resource() Yinghai Lu
2016-04-08  0:15 ` [PATCH v11 02/60] alpha/PCI: Only check iomem_is_exclusive() for IORESOURCE_MEM, not IORESOURCE_IO Yinghai Lu
2016-04-25 21:01   ` Bjorn Helgaas
2016-04-08  0:15 ` [PATCH v11 03/60] PCI: Add pci_find_bus_resource() Yinghai Lu
2016-04-08  0:15 ` [PATCH v11 04/60] sparc/PCI: Use correct offset for bus address to resource Yinghai Lu
2016-04-22 20:49   ` Bjorn Helgaas
2016-04-28  4:55     ` Yinghai Lu
2016-04-28 13:56       ` Bjorn Helgaas
2016-04-29  7:19         ` Yinghai Lu
2016-05-03 22:52           ` Yinghai Lu
2016-05-04  0:37             ` Benjamin Herrenschmidt
2016-05-04  1:25               ` Bjorn Helgaas
2016-05-04  5:08                 ` Yinghai Lu
2016-05-04  5:52                   ` Yinghai Lu
2016-05-04 15:17                     ` Bjorn Helgaas
2016-05-04 18:46                       ` Yinghai Lu
2016-05-05  0:25                         ` Yinghai Lu
2016-05-05 15:53                           ` Yinghai Lu
2016-05-05 22:02                             ` Benjamin Herrenschmidt
2016-05-06  0:56                               ` Yinghai Lu
2016-05-06  4:18                                 ` Yinghai Lu
2016-05-06 18:26                             ` Bjorn Helgaas
2016-05-10  6:18                               ` Yinghai Lu
2016-05-04  4:17               ` David Miller
2016-04-08  0:15 ` [PATCH v11 05/60] sparc/PCI: Reserve legacy mmio after PCI mmio Yinghai Lu
2016-04-08  0:15 ` [PATCH v11 06/60] sparc/PCI: Add IORESOURCE_MEM_64 for 64-bit resource in OF parsing Yinghai Lu
2016-04-08  0:15 ` [PATCH v11 07/60] sparc/PCI: Keep resource idx order with bridge register number Yinghai Lu
2016-04-08  0:15 ` [PATCH v11 08/60] PCI: Kill wrong quirk about M7101 Yinghai Lu
2016-04-08  0:15 ` [PATCH v11 09/60] powerpc/PCI: Keep resource idx order with bridge register number Yinghai Lu
2016-04-08  0:15 ` [PATCH v11 10/60] powerpc/PCI: Add IORESOURCE_MEM_64 for 64-bit resource in OF parsing Yinghai Lu
2016-04-08  0:15 ` [PATCH v11 11/60] OF/PCI: Add IORESOURCE_MEM_64 for 64-bit resource Yinghai Lu
2016-04-08  0:15 ` [PATCH v11 12/60] PCI: Check pref compatible bit for mem64 resource of PCIe device Yinghai Lu
2016-04-08  0:15 ` [PATCH v11 13/60] PCI: Only treat non-pref mmio64 as pref if all bridges have MEM_64 Yinghai Lu
2016-04-08  0:15 ` [PATCH v11 14/60] PCI: Add has_mem64 for struct host_bridge Yinghai Lu
2016-04-08  0:15 ` [PATCH v11 15/60] PCI: Only treat non-pref mmio64 as pref if host bridge has mmio64 Yinghai Lu
2016-04-08  0:15 ` [PATCH v11 16/60] PCI: Restore pref MMIO allocation logic for host bridge without mmio64 Yinghai Lu
2016-04-08  0:15 ` [PATCH v11 17/60] PCI: Don't release fixed resource for realloc Yinghai Lu
2016-04-08  0:15 ` [PATCH v11 18/60] PCI: Claim fixed resource during remove/rescan path Yinghai Lu
2016-04-08  0:15 ` [PATCH v11 19/60] PCI: Set resource to FIXED for LSI devices Yinghai Lu
2016-04-08  0:15 ` [PATCH v11 20/60] PCI: Separate realloc list checking after allocation Yinghai Lu
2016-04-08  0:15 ` [PATCH v11 21/60] PCI: Treat optional as required in first try for bridge rescan Yinghai Lu
2016-04-08  0:15 ` [PATCH v11 22/60] PCI: Get new realloc size for bridge for last try Yinghai Lu
2016-04-08  0:15 ` [PATCH v11 23/60] PCI: Don't release sibling bridge resources during hotplug Yinghai Lu
2016-04-08  0:15 ` [PATCH v11 24/60] PCI: Cleanup res_to_dev_res() printout Yinghai Lu
2016-04-08  0:15 ` [PATCH v11 25/60] PCI: Reuse res_to_dev_res() in reassign_resources_sorted() Yinghai Lu
2016-04-08  0:15 ` [PATCH v11 26/60] PCI: Use correct align for optional only resources during sorting Yinghai Lu
2016-04-08  0:15 ` [PATCH v11 27/60] PCI: Optimize bus min_align/size calculation during sizing Yinghai Lu
2016-04-08  0:15 ` [PATCH v11 28/60] PCI: Optimize bus align/size calculation for optional " Yinghai Lu
2016-04-08  0:15 ` [PATCH v11 29/60] PCI: Don't add too much optional size for hotplug bridge MMIO Yinghai Lu
2016-04-08  0:15 ` [PATCH v11 30/60] PCI: Reorder resources list for required/optional resources Yinghai Lu
2016-04-08  0:15 ` [PATCH v11 31/60] PCI: Remove duplicated code for resource sorting Yinghai Lu
2016-04-08  0:15 ` [PATCH v11 32/60] PCI: Rename pdev_sort_resources() to pdev_assign_resources_prepare() Yinghai Lu
2016-04-08  0:15 ` [PATCH v11 33/60] PCI: Treat ROM resource as optional during realloc Yinghai Lu
2016-04-08  0:15 ` [PATCH v11 34/60] PCI: Add debug printout during releasing partial assigned resources Yinghai Lu
2016-04-08  0:15 ` [PATCH v11 35/60] PCI: Simplify res reference using in __assign_resources_sorted() Yinghai Lu
2016-04-08  0:15 ` [PATCH v11 36/60] PCI: Add __add_to_list() Yinghai Lu
2016-04-08  0:15 ` [PATCH v11 37/60] PCI: Cache window alignment value during bus sizing Yinghai Lu
2016-04-08  0:15 ` [PATCH v11 38/60] PCI: Check if resource is allocated before trying to assign one Yinghai Lu
2016-04-08  0:15 ` [PATCH v11 39/60] PCI: Separate out save_resources()/restore_resources() Yinghai Lu
2016-04-08  0:15 ` [PATCH v11 40/60] PCI: Move comment to pci_need_to_release() Yinghai Lu
2016-04-08  0:15 ` [PATCH v11 41/60] PCI: Separate required+optional assigning to another function Yinghai Lu
2016-04-08  0:15 ` [PATCH v11 42/60] PCI: Skip required+optional if there is no optional Yinghai Lu
2016-04-08  0:15 ` [PATCH v11 43/60] PCI: Move saved required resource list out of required+optional assigning Yinghai Lu
2016-04-08  0:15 ` [PATCH v11 44/60] PCI: Add alt_size ressource allocation support Yinghai Lu
2016-04-08  0:56   ` Linus Torvalds
2016-04-08  5:50     ` Yinghai Lu [this message]
2016-04-08  6:24     ` Benjamin Herrenschmidt
2016-04-08  0:15 ` [PATCH v11 45/60] PCI: Add support for more than two alt_size entries under same bridge Yinghai Lu
2016-04-08  0:15 ` [PATCH v11 46/60] PCI: Fix size calculation with old_size on rescan path Yinghai Lu
2016-04-08  0:16 ` [PATCH v11 47/60] PCI: Don't add too much optional size for hotplug bridge io Yinghai Lu
2016-04-08  0:16 ` [PATCH v11 48/60] PCI: Move ISA io port align out of calculate_iosize() Yinghai Lu
2016-04-08  0:16 ` [PATCH v11 49/60] PCI: Don't add too much io port for hotplug bridge with old size Yinghai Lu
2016-04-08  0:16 ` [PATCH v11 50/60] PCI: Unify calculate_size() for io port and MMIO Yinghai Lu
2016-04-08  0:16 ` [PATCH v11 51/60] PCI: Allow bridge optional only io port resource required size to be 0 Yinghai Lu
2016-04-08  0:16 ` [PATCH v11 52/60] PCI: Unify skip_ioresource_align() Yinghai Lu
2016-04-08  0:16 ` [PATCH v11 53/60] PCI: Kill macro checking for bus io port sizing Yinghai Lu
2016-04-08  0:16 ` [PATCH v11 54/60] resources: Make allocate_resource() return best fit resource Yinghai Lu
2016-04-08  0:16 ` [PATCH v11 55/60] PCI, x86: Allocate from high in available window for MMIO Yinghai Lu
2016-04-08  0:16 ` [PATCH v11 56/60] PCI: Add debug print out for min_align and alt_size Yinghai Lu
2016-04-08  0:16 ` [PATCH v11 57/60] PCI, x86: Add pci=assign_pref_bars to reallocate pref BARs Yinghai Lu
2016-04-08  0:16 ` [PATCH v11 58/60] PCI: Introduce resource_disabled() Yinghai Lu
2016-04-08  0:16 ` [PATCH v11 59/60] PCI: Don't set flags to 0 when assign resource fail Yinghai Lu
2016-04-08  0:16 ` [PATCH v11 60/60] PCI: Only try to assign io port only for root bus that support it Yinghai Lu
2016-04-08  0:51 ` [PATCH v11 00/60] PCI: Resource allocation cleanup for v4.7 Linus Torvalds
2016-04-09  5:29   ` Yinghai Lu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAE9FiQVd0FzfGf0L6+DZWs+MULC7_sA6YAx+mvbeUrx+ZUSbDQ@mail.gmail.com \
    --to=yinghai@kernel.org \
    --cc=benh@kernel.crashing.org \
    --cc=bhelgaas@google.com \
    --cc=davem@davemloft.net \
    --cc=khalid.aziz@oracle.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux@iam.tj \
    --cc=torvalds@linux-foundation.org \
    --cc=wangyijing@huawei.com \
    --cc=weiyang@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).