* [PATCH] qlcnic: replace deprecated strncpy with strscpy
@ 2023-10-12 19:44 Justin Stitt
2023-10-15 2:47 ` Kees Cook
2023-11-30 22:00 ` Kees Cook
0 siblings, 2 replies; 6+ messages in thread
From: Justin Stitt @ 2023-10-12 19:44 UTC (permalink / raw)
To: Shahed Shaikh, Manish Chopra, GR-Linux-NIC-Dev, David S. Miller,
Eric Dumazet, Jakub Kicinski, Paolo Abeni
Cc: netdev, linux-kernel, linux-hardening, Justin Stitt
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We expect fw_info->fw_file_name to be NUL-terminated based on its use
within _request_firmware_prepare() wherein `name` refers to it:
| if (firmware_request_builtin_buf(firmware, name, dbuf, size)) {
| dev_dbg(device, "using built-in %s\n", name);
| return 0; /* assigned */
| }
... and with firmware_request_builtin() also via `name`:
| if (strcmp(name, b_fw->name) == 0) {
There is no evidence that NUL-padding is required.
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
---
Note: build-tested only.
Found with: $ rg "strncpy\("
---
drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
index c95d56e56c59..b733374b4dc5 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
@@ -2092,8 +2092,8 @@ static int qlcnic_83xx_run_post(struct qlcnic_adapter *adapter)
return -EINVAL;
}
- strncpy(fw_info->fw_file_name, QLC_83XX_POST_FW_FILE_NAME,
- QLC_FW_FILE_NAME_LEN);
+ strscpy(fw_info->fw_file_name, QLC_83XX_POST_FW_FILE_NAME,
+ sizeof(fw_info->fw_file_name));
ret = request_firmware(&fw_info->fw, fw_info->fw_file_name, dev);
if (ret) {
@@ -2396,12 +2396,12 @@ static int qlcnic_83xx_get_fw_info(struct qlcnic_adapter *adapter)
switch (pdev->device) {
case PCI_DEVICE_ID_QLOGIC_QLE834X:
case PCI_DEVICE_ID_QLOGIC_QLE8830:
- strncpy(fw_info->fw_file_name, QLC_83XX_FW_FILE_NAME,
- QLC_FW_FILE_NAME_LEN);
+ strscpy(fw_info->fw_file_name, QLC_83XX_FW_FILE_NAME,
+ sizeof(fw_info->fw_file_name));
break;
case PCI_DEVICE_ID_QLOGIC_QLE844X:
- strncpy(fw_info->fw_file_name, QLC_84XX_FW_FILE_NAME,
- QLC_FW_FILE_NAME_LEN);
+ strscpy(fw_info->fw_file_name, QLC_84XX_FW_FILE_NAME,
+ sizeof(fw_info->fw_file_name));
break;
default:
dev_err(&pdev->dev, "%s: Invalid device id\n",
---
base-commit: cbf3a2cb156a2c911d8f38d8247814b4c07f49a2
change-id: 20231012-strncpy-drivers-net-ethernet-qlogic-qlcnic-qlcnic_83xx_init-c-7858019dc583
Best regards,
--
Justin Stitt <justinstitt@google.com>
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH] qlcnic: replace deprecated strncpy with strscpy
2023-10-12 19:44 [PATCH] qlcnic: replace deprecated strncpy with strscpy Justin Stitt
@ 2023-10-15 2:47 ` Kees Cook
2023-10-16 18:14 ` Justin Stitt
2023-11-30 22:00 ` Kees Cook
1 sibling, 1 reply; 6+ messages in thread
From: Kees Cook @ 2023-10-15 2:47 UTC (permalink / raw)
To: Justin Stitt
Cc: Shahed Shaikh, Manish Chopra, GR-Linux-NIC-Dev, David S. Miller,
Eric Dumazet, Jakub Kicinski, Paolo Abeni, netdev, linux-kernel,
linux-hardening
On Thu, Oct 12, 2023 at 07:44:29PM +0000, Justin Stitt wrote:
> strncpy() is deprecated for use on NUL-terminated destination strings
> [1] and as such we should prefer more robust and less ambiguous string
> interfaces.
>
> We expect fw_info->fw_file_name to be NUL-terminated based on its use
> within _request_firmware_prepare() wherein `name` refers to it:
> | if (firmware_request_builtin_buf(firmware, name, dbuf, size)) {
> | dev_dbg(device, "using built-in %s\n", name);
> | return 0; /* assigned */
> | }
> ... and with firmware_request_builtin() also via `name`:
> | if (strcmp(name, b_fw->name) == 0) {
>
> There is no evidence that NUL-padding is required.
>
> Considering the above, a suitable replacement is `strscpy` [2] due to
> the fact that it guarantees NUL-termination on the destination buffer
> without unnecessarily NUL-padding.
When doing the hard-coded value to sizeof(), can you include in the
commit log the rationale for it? For example:
Additionally replace size macro (QLC_FW_FILE_NAME_LEN) with
sizeof(fw_info->fw_file_name) to more directly tie the maximum buffer
size to the destination buffer:
struct qlc_83xx_fw_info {
...
char fw_file_name[QLC_FW_FILE_NAME_LEN];
};
>
> Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
> Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
> Link: https://github.com/KSPP/linux/issues/90
> Cc: linux-hardening@vger.kernel.org
> Signed-off-by: Justin Stitt <justinstitt@google.com>
> ---
> Note: build-tested only.
>
> Found with: $ rg "strncpy\("
> ---
> drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
> index c95d56e56c59..b733374b4dc5 100644
> --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
> +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
> @@ -2092,8 +2092,8 @@ static int qlcnic_83xx_run_post(struct qlcnic_adapter *adapter)
> return -EINVAL;
> }
>
> - strncpy(fw_info->fw_file_name, QLC_83XX_POST_FW_FILE_NAME,
> - QLC_FW_FILE_NAME_LEN);
> + strscpy(fw_info->fw_file_name, QLC_83XX_POST_FW_FILE_NAME,
> + sizeof(fw_info->fw_file_name));
>
> ret = request_firmware(&fw_info->fw, fw_info->fw_file_name, dev);
> if (ret) {
> @@ -2396,12 +2396,12 @@ static int qlcnic_83xx_get_fw_info(struct qlcnic_adapter *adapter)
> switch (pdev->device) {
> case PCI_DEVICE_ID_QLOGIC_QLE834X:
> case PCI_DEVICE_ID_QLOGIC_QLE8830:
> - strncpy(fw_info->fw_file_name, QLC_83XX_FW_FILE_NAME,
> - QLC_FW_FILE_NAME_LEN);
> + strscpy(fw_info->fw_file_name, QLC_83XX_FW_FILE_NAME,
> + sizeof(fw_info->fw_file_name));
> break;
> case PCI_DEVICE_ID_QLOGIC_QLE844X:
> - strncpy(fw_info->fw_file_name, QLC_84XX_FW_FILE_NAME,
> - QLC_FW_FILE_NAME_LEN);
> + strscpy(fw_info->fw_file_name, QLC_84XX_FW_FILE_NAME,
> + sizeof(fw_info->fw_file_name));
> break;
> default:
> dev_err(&pdev->dev, "%s: Invalid device id\n",
But yes, this all looks right to me.
Reviewed-by: Kees Cook <keescook@chromium.org>
--
Kees Cook
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] qlcnic: replace deprecated strncpy with strscpy
2023-10-15 2:47 ` Kees Cook
@ 2023-10-16 18:14 ` Justin Stitt
0 siblings, 0 replies; 6+ messages in thread
From: Justin Stitt @ 2023-10-16 18:14 UTC (permalink / raw)
To: Kees Cook
Cc: Shahed Shaikh, Manish Chopra, GR-Linux-NIC-Dev, David S. Miller,
Eric Dumazet, Jakub Kicinski, Paolo Abeni, netdev, linux-kernel,
linux-hardening
On Sat, Oct 14, 2023 at 7:47 PM Kees Cook <keescook@chromium.org> wrote:
>
> On Thu, Oct 12, 2023 at 07:44:29PM +0000, Justin Stitt wrote:
> > strncpy() is deprecated for use on NUL-terminated destination strings
> > [1] and as such we should prefer more robust and less ambiguous string
> > interfaces.
> >
> > We expect fw_info->fw_file_name to be NUL-terminated based on its use
> > within _request_firmware_prepare() wherein `name` refers to it:
> > | if (firmware_request_builtin_buf(firmware, name, dbuf, size)) {
> > | dev_dbg(device, "using built-in %s\n", name);
> > | return 0; /* assigned */
> > | }
> > ... and with firmware_request_builtin() also via `name`:
> > | if (strcmp(name, b_fw->name) == 0) {
> >
> > There is no evidence that NUL-padding is required.
> >
> > Considering the above, a suitable replacement is `strscpy` [2] due to
> > the fact that it guarantees NUL-termination on the destination buffer
> > without unnecessarily NUL-padding.
>
> When doing the hard-coded value to sizeof(), can you include in the
> commit log the rationale for it? For example:
>
> Additionally replace size macro (QLC_FW_FILE_NAME_LEN) with
> sizeof(fw_info->fw_file_name) to more directly tie the maximum buffer
> size to the destination buffer:
>
> struct qlc_83xx_fw_info {
> ...
> char fw_file_name[QLC_FW_FILE_NAME_LEN];
> };
>
Sure, I'll be doing this from now on to make the change more clear!
>
> >
> > Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
> > Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
> > Link: https://github.com/KSPP/linux/issues/90
> > Cc: linux-hardening@vger.kernel.org
> > Signed-off-by: Justin Stitt <justinstitt@google.com>
> > ---
> > Note: build-tested only.
> >
> > Found with: $ rg "strncpy\("
> > ---
> > drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c | 12 ++++++------
> > 1 file changed, 6 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
> > index c95d56e56c59..b733374b4dc5 100644
> > --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
> > +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
> > @@ -2092,8 +2092,8 @@ static int qlcnic_83xx_run_post(struct qlcnic_adapter *adapter)
> > return -EINVAL;
> > }
> >
> > - strncpy(fw_info->fw_file_name, QLC_83XX_POST_FW_FILE_NAME,
> > - QLC_FW_FILE_NAME_LEN);
> > + strscpy(fw_info->fw_file_name, QLC_83XX_POST_FW_FILE_NAME,
> > + sizeof(fw_info->fw_file_name));
> >
> > ret = request_firmware(&fw_info->fw, fw_info->fw_file_name, dev);
> > if (ret) {
> > @@ -2396,12 +2396,12 @@ static int qlcnic_83xx_get_fw_info(struct qlcnic_adapter *adapter)
> > switch (pdev->device) {
> > case PCI_DEVICE_ID_QLOGIC_QLE834X:
> > case PCI_DEVICE_ID_QLOGIC_QLE8830:
> > - strncpy(fw_info->fw_file_name, QLC_83XX_FW_FILE_NAME,
> > - QLC_FW_FILE_NAME_LEN);
> > + strscpy(fw_info->fw_file_name, QLC_83XX_FW_FILE_NAME,
> > + sizeof(fw_info->fw_file_name));
> > break;
> > case PCI_DEVICE_ID_QLOGIC_QLE844X:
> > - strncpy(fw_info->fw_file_name, QLC_84XX_FW_FILE_NAME,
> > - QLC_FW_FILE_NAME_LEN);
> > + strscpy(fw_info->fw_file_name, QLC_84XX_FW_FILE_NAME,
> > + sizeof(fw_info->fw_file_name));
> > break;
> > default:
> > dev_err(&pdev->dev, "%s: Invalid device id\n",
>
> But yes, this all looks right to me.
>
> Reviewed-by: Kees Cook <keescook@chromium.org>
>
> --
> Kees Cook
Thanks
Justin
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] qlcnic: replace deprecated strncpy with strscpy
2023-10-12 19:44 [PATCH] qlcnic: replace deprecated strncpy with strscpy Justin Stitt
2023-10-15 2:47 ` Kees Cook
@ 2023-11-30 22:00 ` Kees Cook
2023-12-01 6:43 ` Jakub Kicinski
1 sibling, 1 reply; 6+ messages in thread
From: Kees Cook @ 2023-11-30 22:00 UTC (permalink / raw)
To: Shahed Shaikh, Manish Chopra, GR-Linux-NIC-Dev, David S. Miller,
Eric Dumazet, Jakub Kicinski, Paolo Abeni, Justin Stitt
Cc: Kees Cook, netdev, linux-kernel, linux-hardening
On Thu, 12 Oct 2023 19:44:29 +0000, Justin Stitt wrote:
> strncpy() is deprecated for use on NUL-terminated destination strings
> [1] and as such we should prefer more robust and less ambiguous string
> interfaces.
>
> We expect fw_info->fw_file_name to be NUL-terminated based on its use
> within _request_firmware_prepare() wherein `name` refers to it:
> | if (firmware_request_builtin_buf(firmware, name, dbuf, size)) {
> | dev_dbg(device, "using built-in %s\n", name);
> | return 0; /* assigned */
> | }
> ... and with firmware_request_builtin() also via `name`:
> | if (strcmp(name, b_fw->name) == 0) {
>
> [...]
Applied to for-next/hardening, thanks!
[1/1] qlcnic: replace deprecated strncpy with strscpy
https://git.kernel.org/kees/c/f8bef1ef8095
Take care,
--
Kees Cook
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] qlcnic: replace deprecated strncpy with strscpy
2023-11-30 22:00 ` Kees Cook
@ 2023-12-01 6:43 ` Jakub Kicinski
2023-12-01 18:21 ` Kees Cook
0 siblings, 1 reply; 6+ messages in thread
From: Jakub Kicinski @ 2023-12-01 6:43 UTC (permalink / raw)
To: Kees Cook
Cc: Shahed Shaikh, Manish Chopra, GR-Linux-NIC-Dev, David S. Miller,
Eric Dumazet, Paolo Abeni, Justin Stitt, netdev, linux-kernel,
linux-hardening
On Thu, 30 Nov 2023 14:00:28 -0800 Kees Cook wrote:
> [1/1] qlcnic: replace deprecated strncpy with strscpy
> https://git.kernel.org/kees/c/f8bef1ef8095
You asked for changes yourself here, please drop all the networking
patches you applied today :|
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] qlcnic: replace deprecated strncpy with strscpy
2023-12-01 6:43 ` Jakub Kicinski
@ 2023-12-01 18:21 ` Kees Cook
0 siblings, 0 replies; 6+ messages in thread
From: Kees Cook @ 2023-12-01 18:21 UTC (permalink / raw)
To: Jakub Kicinski
Cc: Shahed Shaikh, Manish Chopra, GR-Linux-NIC-Dev, David S. Miller,
Eric Dumazet, Paolo Abeni, Justin Stitt, netdev, linux-kernel,
linux-hardening
On Thu, Nov 30, 2023 at 10:43:12PM -0800, Jakub Kicinski wrote:
> On Thu, 30 Nov 2023 14:00:28 -0800 Kees Cook wrote:
> > [1/1] qlcnic: replace deprecated strncpy with strscpy
> > https://git.kernel.org/kees/c/f8bef1ef8095
>
> You asked for changes yourself here, please drop all the networking
> patches you applied today :|
It was a request for future commit logs. But yes, dropped. Justin, can
you refresh this patch as well, and include the comments about the
sizeof() replacement being safe?
--
Kees Cook
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2023-12-01 18:21 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-10-12 19:44 [PATCH] qlcnic: replace deprecated strncpy with strscpy Justin Stitt
2023-10-15 2:47 ` Kees Cook
2023-10-16 18:14 ` Justin Stitt
2023-11-30 22:00 ` Kees Cook
2023-12-01 6:43 ` Jakub Kicinski
2023-12-01 18:21 ` Kees Cook
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).