* [PATCH 1/2] arm64: dts: qcom: msm8996: Add VFE SMMU node
@ 2018-11-19 9:25 Todor Tomov
2018-11-19 9:25 ` [PATCH 2/2] arm64: dts: qcom: msm8996: Add CAMSS support Todor Tomov
2018-11-19 11:08 ` [PATCH 1/2] arm64: dts: qcom: msm8996: Add VFE SMMU node Vivek Gautam
0 siblings, 2 replies; 3+ messages in thread
From: Todor Tomov @ 2018-11-19 9:25 UTC (permalink / raw)
To: andy.gross, david.brown, robh+dt, mark.rutland, linux-arm-msm,
linux-soc, devicetree
Cc: linux-kernel, vivek.gautam, Todor Tomov
Add VFE SMMU node.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
---
This patch depends on patchset:
https://lore.kernel.org/patchwork/cover/1013166/
arch/arm64/boot/dts/qcom/msm8996.dtsi | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 13bb964..a4d087e5 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -950,6 +950,23 @@
};
};
+ vfe_smmu: arm,smmu@da0000 {
+ compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
+ reg = <0xda0000 0x10000>;
+
+ #global-interrupts = <1>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&mmcc MMAGIC_CAMSS_GDSC>;
+ clocks = <&mmcc SMMU_VFE_AHB_CLK>,
+ <&mmcc SMMU_VFE_AXI_CLK>;
+ clock-names = "iface",
+ "bus";
+ #iommu-cells = <1>;
+ status = "ok";
+ };
+
agnoc@0 {
power-domains = <&gcc AGGRE0_NOC_GDSC>;
compatible = "simple-pm-bus";
--
2.7.4
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH 2/2] arm64: dts: qcom: msm8996: Add CAMSS support
2018-11-19 9:25 [PATCH 1/2] arm64: dts: qcom: msm8996: Add VFE SMMU node Todor Tomov
@ 2018-11-19 9:25 ` Todor Tomov
2018-11-19 11:08 ` [PATCH 1/2] arm64: dts: qcom: msm8996: Add VFE SMMU node Vivek Gautam
1 sibling, 0 replies; 3+ messages in thread
From: Todor Tomov @ 2018-11-19 9:25 UTC (permalink / raw)
To: andy.gross, david.brown, robh+dt, mark.rutland, linux-arm-msm,
linux-soc, devicetree
Cc: linux-kernel, vivek.gautam, Todor Tomov
Add a node for the Camera Subsystem present on the Qualcomm
MSM8996 SoC.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 135 ++++++++++++++++++++++++++++++++++
1 file changed, 135 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index a4d087e5..8585c61 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -967,6 +967,141 @@
status = "ok";
};
+ camss: camss@a00000 {
+ compatible = "qcom,msm8996-camss";
+ reg = <0xa34000 0x1000>,
+ <0xa00030 0x4>,
+ <0xa35000 0x1000>,
+ <0xa00038 0x4>,
+ <0xa36000 0x1000>,
+ <0xa00040 0x4>,
+ <0xa30000 0x100>,
+ <0xa30400 0x100>,
+ <0xa30800 0x100>,
+ <0xa30c00 0x100>,
+ <0xa31000 0x500>,
+ <0xa00020 0x10>,
+ <0xa10000 0x1000>,
+ <0xa14000 0x1000>;
+ reg-names = "csiphy0",
+ "csiphy0_clk_mux",
+ "csiphy1",
+ "csiphy1_clk_mux",
+ "csiphy2",
+ "csiphy2_clk_mux",
+ "csid0",
+ "csid1",
+ "csid2",
+ "csid3",
+ "ispif",
+ "csi_clk_mux",
+ "vfe0",
+ "vfe1";
+ interrupts = <GIC_SPI 78 0>,
+ <GIC_SPI 79 0>,
+ <GIC_SPI 80 0>,
+ <GIC_SPI 296 0>,
+ <GIC_SPI 297 0>,
+ <GIC_SPI 298 0>,
+ <GIC_SPI 299 0>,
+ <GIC_SPI 309 0>,
+ <GIC_SPI 314 0>,
+ <GIC_SPI 315 0>;
+ interrupt-names = "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csid0",
+ "csid1",
+ "csid2",
+ "csid3",
+ "ispif",
+ "vfe0",
+ "vfe1";
+ power-domains = <&mmcc VFE0_GDSC>;
+ clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
+ <&mmcc CAMSS_ISPIF_AHB_CLK>,
+ <&mmcc CAMSS_CSI0PHYTIMER_CLK>,
+ <&mmcc CAMSS_CSI1PHYTIMER_CLK>,
+ <&mmcc CAMSS_CSI2PHYTIMER_CLK>,
+ <&mmcc CAMSS_CSI0_AHB_CLK>,
+ <&mmcc CAMSS_CSI0_CLK>,
+ <&mmcc CAMSS_CSI0PHY_CLK>,
+ <&mmcc CAMSS_CSI0PIX_CLK>,
+ <&mmcc CAMSS_CSI0RDI_CLK>,
+ <&mmcc CAMSS_CSI1_AHB_CLK>,
+ <&mmcc CAMSS_CSI1_CLK>,
+ <&mmcc CAMSS_CSI1PHY_CLK>,
+ <&mmcc CAMSS_CSI1PIX_CLK>,
+ <&mmcc CAMSS_CSI1RDI_CLK>,
+ <&mmcc CAMSS_CSI2_AHB_CLK>,
+ <&mmcc CAMSS_CSI2_CLK>,
+ <&mmcc CAMSS_CSI2PHY_CLK>,
+ <&mmcc CAMSS_CSI2PIX_CLK>,
+ <&mmcc CAMSS_CSI2RDI_CLK>,
+ <&mmcc CAMSS_CSI3_AHB_CLK>,
+ <&mmcc CAMSS_CSI3_CLK>,
+ <&mmcc CAMSS_CSI3PHY_CLK>,
+ <&mmcc CAMSS_CSI3PIX_CLK>,
+ <&mmcc CAMSS_CSI3RDI_CLK>,
+ <&mmcc CAMSS_AHB_CLK>,
+ <&mmcc CAMSS_VFE0_CLK>,
+ <&mmcc CAMSS_CSI_VFE0_CLK>,
+ <&mmcc CAMSS_VFE0_AHB_CLK>,
+ <&mmcc CAMSS_VFE0_STREAM_CLK>,
+ <&mmcc CAMSS_VFE1_CLK>,
+ <&mmcc CAMSS_CSI_VFE1_CLK>,
+ <&mmcc CAMSS_VFE1_AHB_CLK>,
+ <&mmcc CAMSS_VFE1_STREAM_CLK>,
+ <&mmcc CAMSS_VFE_AHB_CLK>,
+ <&mmcc CAMSS_VFE_AXI_CLK>;
+ clock-names = "top_ahb",
+ "ispif_ahb",
+ "csiphy0_timer",
+ "csiphy1_timer",
+ "csiphy2_timer",
+ "csi0_ahb",
+ "csi0",
+ "csi0_phy",
+ "csi0_pix",
+ "csi0_rdi",
+ "csi1_ahb",
+ "csi1",
+ "csi1_phy",
+ "csi1_pix",
+ "csi1_rdi",
+ "csi2_ahb",
+ "csi2",
+ "csi2_phy",
+ "csi2_pix",
+ "csi2_rdi",
+ "csi3_ahb",
+ "csi3",
+ "csi3_phy",
+ "csi3_pix",
+ "csi3_rdi",
+ "ahb",
+ "vfe0",
+ "csi_vfe0",
+ "vfe0_ahb",
+ "vfe0_stream",
+ "vfe1",
+ "csi_vfe1",
+ "vfe1_ahb",
+ "vfe1_stream",
+ "vfe_ahb",
+ "vfe_axi";
+ vdda-supply = <&pm8994_l2>;
+ iommus = <&vfe_smmu 0>,
+ <&vfe_smmu 1>,
+ <&vfe_smmu 2>,
+ <&vfe_smmu 3>;
+ status = "disabled";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
agnoc@0 {
power-domains = <&gcc AGGRE0_NOC_GDSC>;
compatible = "simple-pm-bus";
--
2.7.4
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH 1/2] arm64: dts: qcom: msm8996: Add VFE SMMU node
2018-11-19 9:25 [PATCH 1/2] arm64: dts: qcom: msm8996: Add VFE SMMU node Todor Tomov
2018-11-19 9:25 ` [PATCH 2/2] arm64: dts: qcom: msm8996: Add CAMSS support Todor Tomov
@ 2018-11-19 11:08 ` Vivek Gautam
1 sibling, 0 replies; 3+ messages in thread
From: Vivek Gautam @ 2018-11-19 11:08 UTC (permalink / raw)
To: todor.tomov
Cc: Andy Gross, David Brown, robh+dt, Mark Rutland, linux-arm-msm,
open list:ARM/QUALCOMM SUPPORT,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
Hi Todor,
On Mon, Nov 19, 2018 at 2:57 PM Todor Tomov <todor.tomov@linaro.org> wrote:
>
> Add VFE SMMU node.
>
> Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
> ---
>
> This patch depends on patchset:
> https://lore.kernel.org/patchwork/cover/1013166/
>
> arch/arm64/boot/dts/qcom/msm8996.dtsi | 17 +++++++++++++++++
> 1 file changed, 17 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> index 13bb964..a4d087e5 100644
> --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> @@ -950,6 +950,23 @@
> };
> };
>
> + vfe_smmu: arm,smmu@da0000 {
> + compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
> + reg = <0xda0000 0x10000>;
> +
> + #global-interrupts = <1>;
> + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
> + power-domains = <&mmcc MMAGIC_CAMSS_GDSC>;
> + clocks = <&mmcc SMMU_VFE_AHB_CLK>,
> + <&mmcc SMMU_VFE_AXI_CLK>;
> + clock-names = "iface",
> + "bus";
> + #iommu-cells = <1>;
> + status = "ok";
No point of adding this status here.
Rest looks good to me.
Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Best regards
Vivek
> + };
> +
> agnoc@0 {
> power-domains = <&gcc AGGRE0_NOC_GDSC>;
> compatible = "simple-pm-bus";
> --
> 2.7.4
>
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-11-19 11:08 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-11-19 9:25 [PATCH 1/2] arm64: dts: qcom: msm8996: Add VFE SMMU node Todor Tomov
2018-11-19 9:25 ` [PATCH 2/2] arm64: dts: qcom: msm8996: Add CAMSS support Todor Tomov
2018-11-19 11:08 ` [PATCH 1/2] arm64: dts: qcom: msm8996: Add VFE SMMU node Vivek Gautam
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).