From: Chen-Yu Tsai <wens@csie.org>
To: Icenowy Zheng <icenowy@aosc.io>
Cc: Lee Jones <lee.jones@linaro.org>,
Rob Herring <robh+dt@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
Maxime Ripard <maxime.ripard@free-electrons.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
devicetree <devicetree@vger.kernel.org>,
linux-kernel <linux-kernel@vger.kernel.org>,
linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
linux-sunxi <linux-sunxi@googlegroups.com>
Subject: Re: [linux-sunxi] [PATCH v3 10/12] arm64: allwinner: a64: add DTSI file for AXP803 PMIC
Date: Tue, 18 Apr 2017 15:20:09 +0800 [thread overview]
Message-ID: <CAGb2v64DRQeKAkBiVCLTpsGGi3vSYzztthmgCt1z6HeCRb0PHQ@mail.gmail.com> (raw)
In-Reply-To: <20170417115747.7300-11-icenowy@aosc.io>
Hi,
On Mon, Apr 17, 2017 at 7:57 PM, Icenowy Zheng <icenowy@aosc.io> wrote:
> As nearly all A64 boards are using AXP803 PMIC, add a DTSI file for it,
> like the old DTSI files for AXP20x/22x, for the common parts of the
> PMIC.
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> ---
> arch/arm64/boot/dts/allwinner/axp803.dtsi | 150 ++++++++++++++++++++++++++++++
> 1 file changed, 150 insertions(+)
> create mode 100644 arch/arm64/boot/dts/allwinner/axp803.dtsi
>
> diff --git a/arch/arm64/boot/dts/allwinner/axp803.dtsi b/arch/arm64/boot/dts/allwinner/axp803.dtsi
> new file mode 100644
> index 000000000000..f0e53a7fffbd
> --- /dev/null
> +++ b/arch/arm64/boot/dts/allwinner/axp803.dtsi
> @@ -0,0 +1,150 @@
> +/*
> + * Copyright 2017 Icenowy Zheng <icenowy@aosc.xyz>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/*
> + * AXP803 Integrated Power Management Chip
> + * http://files.pine64.org/doc/datasheet/pine64/AXP803_Datasheet_V1.0.pdf
> + */
> +
> +&axp803 {
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> + regulators {
> + /* Default work frequency for buck regulators */
> + x-powers,dcdc-freq = <3000>;
> +
> + reg_dcdc1: dcdc1 {
> + regulator-name = "dcdc1";
> + };
> +
> + reg_dcdc2: dcdc2 {
> + regulator-name = "dcdc2";
> + };
> +
> + reg_dcdc3: dcdc3 {
> + regulator-name = "dcdc3";
> + };
> +
> + reg_dcdc4: dcdc4 {
> + regulator-name = "dcdc4";
> + };
> +
> + reg_dcdc5: dcdc5 {
> + regulator-name = "dcdc5";
> + };
> +
> + reg_dcdc6: dcdc6 {
> + regulator-name = "dcdc6";
> + };
> +
> + reg_dc1sw: dc1sw {
> + regulator-name = "dc1sw";
> + };
> +
> + reg_aldo1: aldo1 {
> + regulator-name = "aldo1";
> + };
> +
> + reg_aldo2: aldo2 {
> + regulator-name = "aldo2";
> + };
> +
> + reg_aldo3: aldo3 {
> + regulator-name = "aldo3";
> + };
> +
> + reg_dldo1: dldo1 {
> + regulator-name = "dldo1";
> + };
> +
> + reg_dldo2: dldo2 {
> + regulator-name = "dldo2";
> + };
> +
> + reg_dldo3: dldo3 {
> + regulator-name = "dldo3";
> + };
> +
> + reg_dldo4: dldo4 {
> + regulator-name = "dldo4";
> + };
> +
> + reg_eldo1: eldo1 {
> + regulator-name = "eldo1";
> + };
> +
> + reg_eldo2: eldo2 {
> + regulator-name = "eldo2";
> + };
> +
> + reg_eldo3: eldo3 {
> + regulator-name = "eldo3";
> + };
> +
> + reg_fldo1: fldo1 {
> + regulator-name = "fldo1";
> + };
> +
> + reg_fldo2: fldo2 {
> + regulator-name = "fldo2";
> + };
> +
> + reg_ldo_io0: ldo_io0 {
> + regulator-name = "ldo_io0";
Please use hyphens instead of underscores for the node name,
and preferably, for the regulator name as well.
ChenYu
next prev parent reply other threads:[~2017-04-18 7:20 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-17 11:57 [PATCH v3 00/12] AXP803 PMIC support for Pine64 Icenowy Zheng
2017-04-17 11:57 ` [PATCH v3 01/12] arm64: allwinner: a64: enable RSB on A64 Icenowy Zheng
2017-04-18 5:37 ` Maxime Ripard
2017-04-17 11:57 ` [PATCH v3 02/12] arm64: allwinner: a64: add NMI controller " Icenowy Zheng
2017-04-18 7:00 ` Maxime Ripard
2017-04-18 10:56 ` [linux-sunxi] " Icenowy Zheng
2017-04-20 5:58 ` Maxime Ripard
2017-04-20 7:03 ` icenowy
2017-04-24 7:17 ` Maxime Ripard
2017-04-24 10:25 ` icenowy
2017-04-17 11:57 ` [PATCH v3 03/12] dt-bindings: make AXP20X compatible strings one per line Icenowy Zheng
2017-04-18 10:35 ` [linux-sunxi] " Chen-Yu Tsai
2017-04-20 14:18 ` Rob Herring
2017-04-24 12:07 ` Lee Jones
2017-04-17 11:57 ` [PATCH v3 04/12] dt-bindings: add device tree binding for X-Powers AXP803 PMIC Icenowy Zheng
2017-04-24 12:08 ` Lee Jones
2017-04-17 11:57 ` [PATCH v3 05/12] mfd: axp20x: support AXP803 variant Icenowy Zheng
2017-04-24 12:09 ` Lee Jones
2017-04-17 11:57 ` [PATCH v3 06/12] arm64: allwinner: a64: add AXP803 node to Pine64 device tree Icenowy Zheng
2017-04-17 11:57 ` [PATCH v3 07/12] dt-bindings: add AXP803's regulator info Icenowy Zheng
2017-04-18 10:36 ` [linux-sunxi] " Chen-Yu Tsai
2017-04-24 12:09 ` Lee Jones
2017-04-17 11:57 ` [PATCH v3 08/12] regulator: axp20x-regulator: add support for AXP803 Icenowy Zheng
2017-04-18 12:07 ` [linux-sunxi] " Chen-Yu Tsai
2017-04-26 14:45 ` Mark Brown
2017-04-17 11:57 ` [PATCH v3 09/12] mfd: axp20x: add axp20x-regulator cell " Icenowy Zheng
2017-04-18 10:38 ` [linux-sunxi] " Chen-Yu Tsai
2017-04-18 10:55 ` Icenowy Zheng
2017-04-18 11:58 ` Chen-Yu Tsai
2017-04-17 11:57 ` [PATCH v3 10/12] arm64: allwinner: a64: add DTSI file for AXP803 PMIC Icenowy Zheng
2017-04-18 7:08 ` Maxime Ripard
2017-04-18 7:20 ` Chen-Yu Tsai [this message]
2017-04-17 11:57 ` [PATCH v3 11/12] arm64: allwinner: a64: enable AXP803 regulators for Pine64 Icenowy Zheng
2017-04-17 11:57 ` [PATCH v3 12/12] arm64: allwinner: a64: enable Wi-Fi " Icenowy Zheng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAGb2v64DRQeKAkBiVCLTpsGGi3vSYzztthmgCt1z6HeCRb0PHQ@mail.gmail.com \
--to=wens@csie.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=icenowy@aosc.io \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=maxime.ripard@free-electrons.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).