linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Amit Kucheria <amit.kucheria@linaro.org>
To: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Zhang Rui <rui.zhang@intel.com>,
	Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>,
	Ram Chandrasekar <rkumbako@codeaurora.org>,
	LKML <linux-kernel@vger.kernel.org>,
	Linux PM list <linux-pm@vger.kernel.org>
Subject: Re: [PATCH v3 4/4] thermal: core: Add notifications call in the framework
Date: Fri, 3 Jul 2020 15:00:14 +0530	[thread overview]
Message-ID: <CAHLCerPicxHbx1K+riKeuDkXQ4yNDAimrK0TN780c3SsXL7q6g@mail.gmail.com> (raw)
In-Reply-To: <20200703085309.32166-4-daniel.lezcano@linaro.org>

On Fri, Jul 3, 2020 at 2:23 PM Daniel Lezcano <daniel.lezcano@linaro.org> wrote:
>
> The generic netlink protocol is implemented but the different
> notification functions are not yet connected to the core code.
>
> These changes add the notification calls in the different
> corresponding places.
>
> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>

> ---
>  drivers/thermal/thermal_core.c    | 21 +++++++++++++++++++++
>  drivers/thermal/thermal_helpers.c | 11 +++++++++--
>  drivers/thermal/thermal_sysfs.c   | 15 ++++++++++++++-
>  3 files changed, 44 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
> index 5fae1621fb01..25ef29123f72 100644
> --- a/drivers/thermal/thermal_core.c
> +++ b/drivers/thermal/thermal_core.c
> @@ -215,6 +215,8 @@ int thermal_zone_device_set_policy(struct thermal_zone_device *tz,
>         mutex_unlock(&tz->lock);
>         mutex_unlock(&thermal_governor_lock);
>
> +       thermal_notify_tz_gov_change(tz->id, policy);
> +
>         return ret;
>  }
>
> @@ -406,12 +408,25 @@ static void handle_critical_trips(struct thermal_zone_device *tz,
>  static void handle_thermal_trip(struct thermal_zone_device *tz, int trip)
>  {
>         enum thermal_trip_type type;
> +       int trip_temp, hyst = 0;
>
>         /* Ignore disabled trip points */
>         if (test_bit(trip, &tz->trips_disabled))
>                 return;
>
> +       tz->ops->get_trip_temp(tz, trip, &trip_temp);
>         tz->ops->get_trip_type(tz, trip, &type);
> +       if (tz->ops->get_trip_hyst)
> +               tz->ops->get_trip_hyst(tz, trip, &hyst);
> +
> +       if (tz->last_temperature != THERMAL_TEMP_INVALID) {
> +               if (tz->last_temperature < trip_temp &&
> +                   tz->temperature >= trip_temp)
> +                       thermal_notify_tz_trip_up(tz->id, trip);
> +               if (tz->last_temperature >= trip_temp &&
> +                   tz->temperature < (trip_temp - hyst))
> +                       thermal_notify_tz_trip_down(tz->id, trip);
> +       }
>
>         if (type == THERMAL_TRIP_CRITICAL || type == THERMAL_TRIP_HOT)
>                 handle_critical_trips(tz, trip, type);
> @@ -443,6 +458,8 @@ static void update_temperature(struct thermal_zone_device *tz)
>         mutex_unlock(&tz->lock);
>
>         trace_thermal_temperature(tz);
> +
> +       thermal_genl_sampling_temp(tz->id, temp);
>  }
>
>  static void thermal_zone_device_init(struct thermal_zone_device *tz)
> @@ -1405,6 +1422,8 @@ thermal_zone_device_register(const char *type, int trips, int mask,
>         if (atomic_cmpxchg(&tz->need_update, 1, 0))
>                 thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
>
> +       thermal_notify_tz_create(tz->id, tz->type);
> +
>         return tz;
>
>  unregister:
> @@ -1476,6 +1495,8 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz)
>         ida_destroy(&tz->ida);
>         mutex_destroy(&tz->lock);
>         device_unregister(&tz->device);
> +
> +       thermal_notify_tz_delete(tz->id);
>  }
>  EXPORT_SYMBOL_GPL(thermal_zone_device_unregister);
>
> diff --git a/drivers/thermal/thermal_helpers.c b/drivers/thermal/thermal_helpers.c
> index 87b1256fa2f2..53dd92ccfd19 100644
> --- a/drivers/thermal/thermal_helpers.c
> +++ b/drivers/thermal/thermal_helpers.c
> @@ -175,6 +175,14 @@ void thermal_zone_set_trips(struct thermal_zone_device *tz)
>         mutex_unlock(&tz->lock);
>  }
>
> +void thermal_cdev_set_cur_state(struct thermal_cooling_device *cdev, int target)
> +{
> +       if (cdev->ops->set_cur_state(cdev, target))
> +               return;
> +       thermal_notify_cdev_update(cdev->id, target);
> +       thermal_cooling_device_stats_update(cdev, target);
> +}
> +
>  void thermal_cdev_update(struct thermal_cooling_device *cdev)
>  {
>         struct thermal_instance *instance;
> @@ -197,8 +205,7 @@ void thermal_cdev_update(struct thermal_cooling_device *cdev)
>                         target = instance->target;
>         }
>
> -       if (!cdev->ops->set_cur_state(cdev, target))
> -               thermal_cooling_device_stats_update(cdev, target);
> +       thermal_cdev_set_cur_state(cdev, target);
>
>         cdev->updated = true;
>         mutex_unlock(&cdev->lock);
> diff --git a/drivers/thermal/thermal_sysfs.c b/drivers/thermal/thermal_sysfs.c
> index aa99edb4dff7..ff449943f757 100644
> --- a/drivers/thermal/thermal_sysfs.c
> +++ b/drivers/thermal/thermal_sysfs.c
> @@ -124,7 +124,8 @@ trip_point_temp_store(struct device *dev, struct device_attribute *attr,
>  {
>         struct thermal_zone_device *tz = to_thermal_zone(dev);
>         int trip, ret;
> -       int temperature;
> +       int temperature, hyst = 0;
> +       enum thermal_trip_type type;
>
>         if (!tz->ops->set_trip_temp)
>                 return -EPERM;
> @@ -139,6 +140,18 @@ trip_point_temp_store(struct device *dev, struct device_attribute *attr,
>         if (ret)
>                 return ret;
>
> +       if (tz->ops->get_trip_hyst) {
> +               ret = tz->ops->get_trip_hyst(tz, trip, &hyst);
> +               if (ret)
> +                       return ret;
> +       }
> +
> +       ret = tz->ops->get_trip_type(tz, trip, &type);
> +       if (ret)
> +               return ret;
> +
> +       thermal_notify_tz_trip_change(tz->id, trip, type, temperature, hyst);
> +
>         thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
>
>         return count;
> --
> 2.17.1
>

  reply	other threads:[~2020-07-03  9:30 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-03  8:53 [PATCH v3 1/4] thermal: core: Add helpers to browse the cdev, tz and governor list Daniel Lezcano
2020-07-03  8:53 ` [PATCH v3 2/4] thermal: core: Get thermal zone by id Daniel Lezcano
2020-07-03  8:53 ` [PATCH v3 3/4] thermal: core: genetlink support for events/cmd/sampling Daniel Lezcano
2020-07-03  9:28   ` Amit Kucheria
2020-07-05  6:03   ` Zhang Rui
2020-07-05 10:54     ` Daniel Lezcano
2020-07-06  7:04     ` Daniel Lezcano
2020-07-03  8:53 ` [PATCH v3 4/4] thermal: core: Add notifications call in the framework Daniel Lezcano
2020-07-03  9:30   ` Amit Kucheria [this message]
2020-07-03 17:03   ` kernel test robot
2020-07-03 17:03   ` [RFC PATCH] thermal: core: thermal_cdev_set_cur_state() can be static kernel test robot
2020-07-03 18:22   ` [PATCH v3 4/4] thermal: core: Add notifications call in the framework kernel test robot
2020-07-03  9:14 ` [PATCH v3 1/4] thermal: core: Add helpers to browse the cdev, tz and governor list Amit Kucheria

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAHLCerPicxHbx1K+riKeuDkXQ4yNDAimrK0TN780c3SsXL7q6g@mail.gmail.com \
    --to=amit.kucheria@linaro.org \
    --cc=daniel.lezcano@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=rkumbako@codeaurora.org \
    --cc=rui.zhang@intel.com \
    --cc=srinivas.pandruvada@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).