* [Regression] [Radeon] Stream command failures and render problems in Evergreen (Radeon HD 5600) in kernel 3.4
@ 2012-06-03 17:26 Brian Gitonga Marete
2012-06-03 17:34 ` Brian Gitonga Marete
2012-06-06 22:59 ` Brian Gitonga Marete
0 siblings, 2 replies; 30+ messages in thread
From: Brian Gitonga Marete @ 2012-06-03 17:26 UTC (permalink / raw)
To: LKML; +Cc: David Airlie, Alex Deucher
[-- Attachment #1: Type: text/plain, Size: 15141 bytes --]
Hello,
3.4 breaks rendering on my Radeon evergreen card. Immediately after
logging in into the desktop, I get the following errors in the kernel
log:
radeon 0000:01:00.0: evergreen_cs_track_validate_cb:439 cb[0] bo too
small (layer size 147456, offset 0, max layer 1, bo size 143360, slice
575)
radeon 0000:01:00.0: evergreen_cs_track_validate_cb:443 problematic
surf: (192 192) (0 4 1 0 0 0 0)
radeon 0000:01:00.0: evergreen_packet3_check:2055 invalid cmd stream 461
[drm:radeon_cs_ib_chunk] *ERROR* Invalid command stream !
radeon 0000:01:00.0: evergreen_cs_track_validate_cb:439 cb[0] bo too
small (layer size 147456, offset 0, max layer 1, bo size 143360, slice
575)
radeon 0000:01:00.0: evergreen_cs_track_validate_cb:443 problematic
surf: (192 192) (0 4 1 0 0 0 0)
radeon 0000:01:00.0: evergreen_packet3_check:2055 invalid cmd stream 461
[drm:radeon_cs_ib_chunk] *ERROR* Invalid command stream !
radeon 0000:01:00.0: evergreen_cs_track_validate_cb:439 cb[0] bo too
small (layer size 798720, offset 0, max layer 1, bo size 794624, slice
3119)
radeon 0000:01:00.0: evergreen_cs_track_validate_cb:443 problematic
surf: (384 520) (0 4 1 0 0 0 0)
radeon 0000:01:00.0: evergreen_packet3_check:2055 invalid cmd stream 461
[drm:radeon_cs_ib_chunk] *ERROR* Invalid command stream !
radeon 0000:01:00.0: evergreen_cs_track_validate_cb:439 cb[0] bo too
small (layer size 458752, offset 0, max layer 1, bo size 446464, slice
1791)
radeon 0000:01:00.0: evergreen_cs_track_validate_cb:443 problematic
surf: (512 224) (0 4 1 0 0 0 0)
radeon 0000:01:00.0: evergreen_packet3_check:2055 invalid cmd stream 7170
[drm:radeon_cs_ib_chunk] *ERROR* Invalid command stream !
radeon 0000:01:00.0: evergreen_cs_track_validate_cb:439 cb[0] bo too
small (layer size 798720, offset 0, max layer 1, bo size 790528, slice
3119)
radeon 0000:01:00.0: evergreen_cs_track_validate_cb:443 problematic
surf: (384 520) (0 4 1 0 0 0 0)
radeon 0000:01:00.0: evergreen_packet3_check:2055 invalid cmd stream 461
[drm:radeon_cs_ib_chunk] *ERROR* Invalid command stream !
Meanwhile, windows on the desktop are rendered incorrectly (with
certain regions covered by strange patterns or smudged) or not at all.
This makes the desktop unusable.
I can always reproduce this problem on 3.4
Kernels prior to 3.4 work fine.
I will try and find the time to bisect this issue but meanwhile here
are some further details:
Output of lspci -v
--------------------------
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18)
Subsystem: Dell Device 0447
Flags: bus master, fast devsel, latency 0
Capabilities: <access denied>
Kernel modules: intel-agp
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16
Root Port (rev 18) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbe00000-fbefffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:16.0 Communication controller: Intel Corporation 5 Series/3400
Series Chipset HECI Controller (rev 06)
Subsystem: Dell Device 0447
Flags: bus master, fast devsel, latency 0, IRQ 48
Memory at fbf09000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei
Kernel modules: mei
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset
USB2 Enhanced Host Controller (rev 06) (prog-if 20 [EHCI])
Subsystem: Dell Device 0447
Flags: bus master, medium devsel, latency 0, IRQ 16
Memory at fbf08000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset
High Definition Audio (rev 06)
Subsystem: Dell Device 0447
Flags: bus master, fast devsel, latency 0, IRQ 50
Memory at fbf00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI
Express Root Port 1 (rev 06) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=11, subordinate=11, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: d1800000-d19fffff
Prefetchable memory behind bridge: 00000000d1a00000-00000000d1bfffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI
Express Root Port 2 (rev 06) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=12, subordinate=12, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fbd00000-fbdfffff
Prefetchable memory behind bridge: 00000000d1600000-00000000d17fffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI
Express Root Port 3 (rev 06) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=13, subordinate=13, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fb300000-fbcfffff
Prefetchable memory behind bridge: 00000000d0c00000-00000000d15fffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI
Express Root Port 5 (rev 06) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=15, subordinate=15, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fa900000-fb2fffff
Prefetchable memory behind bridge: 00000000d0100000-00000000d0afffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset
USB2 Enhanced Host Controller (rev 06) (prog-if 20 [EHCI])
Subsystem: Dell Device 0447
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at fbf07000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6)
(prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=20, subordinate=20, sec-latency=32
Capabilities: <access denied>
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC
Interface Controller (rev 06)
Subsystem: Dell Device 0447
Flags: bus master, medium devsel, latency 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series
Chipset 6 port SATA AHCI Controller (rev 06) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device 0447
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 46
I/O ports at f070 [size=8]
I/O ports at f060 [size=4]
I/O ports at f050 [size=8]
I/O ports at f040 [size=4]
I/O ports at f020 [size=32]
Memory at fbf06000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus
Controller (rev 06)
Subsystem: Dell Device 0447
Flags: medium devsel, IRQ 3
Memory at fbf05000 (64-bit, non-prefetchable) [size=256]
I/O ports at f000 [size=32]
Kernel modules: i2c-i801
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400
Series Chipset Thermal Subsystem (rev 06)
Subsystem: Dell Device 0447
Flags: bus master, fast devsel, latency 0, IRQ 18
Memory at fbf04000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel ips
Kernel modules: intel_ips
01:00.0 VGA compatible controller: ATI Technologies Inc Redwood
[Radeon HD 5600 Series] (prog-if 00 [VGA controller])
Subsystem: Dell Device 0447
Flags: bus master, fast devsel, latency 0, IRQ 47
Memory at c0000000 (64-bit, prefetchable) [size=256M]
Memory at fbe20000 (64-bit, non-prefetchable) [size=128K]
I/O ports at e000 [size=256]
Expansion ROM at fbe00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
Kernel modules: radeon
01:00.1 Audio device: ATI Technologies Inc Redwood HDMI Audio [Radeon
HD 5600 Series]
Subsystem: Dell Device 0447
Flags: bus master, fast devsel, latency 0, IRQ 51
Memory at fbe40000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd-hda-intel
12:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000
Subsystem: Intel Corporation Centrino Wireless-N 1000 BGN
Flags: bus master, fast devsel, latency 0, IRQ 49
Memory at fbd00000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
13:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
Subsystem: Dell Device 0447
Flags: bus master, fast devsel, latency 0, IRQ 45
I/O ports at d000 [size=256]
Memory at d0c10000 (64-bit, prefetchable) [size=4K]
Memory at d0c00000 (64-bit, prefetchable) [size=64K]
Expansion ROM at fb300000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath
Architecture Generic Non-core Registers (rev 05)
Subsystem: Intel Corporation Device 8086
Flags: bus master, fast devsel, latency 0
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath
Architecture System Address Decoder (rev 05)
Subsystem: Intel Corporation Device 8086
Flags: bus master, fast devsel, latency 0
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05)
Subsystem: Intel Corporation Device 8086
Flags: bus master, fast devsel, latency 0
ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05)
Subsystem: Intel Corporation Device 8086
Flags: bus master, fast devsel, latency 0
ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05)
Subsystem: Intel Corporation Device 8086
Flags: bus master, fast devsel, latency 0
ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05)
Subsystem: Intel Corporation Device 8086
Flags: bus master, fast devsel, latency 0
First stable kernel version exhibiting the problem
----------------------------------------------------------------------------
3.4.0 (From kernel.org)
Distribution
--------------------
Ubuntu 11.04
Xorg Packages/ Drivers
-------------------------------------
ii xorg 1:7.6+4ubuntu3.2
X.Org X Window System
ii xorg-docs-core 1:1.5.99.901-1ubuntu1
Core documentation for the X.org X
Window System
ii xorg-sgml-doctools 1:1.6-1
Common tools for building X.Org SGML
documentation
ii xserver-xorg 1:7.6+4ubuntu3.2
the X.Org X server
ii xserver-xorg-core 2:1.10.1-1ubuntu1.3
Xorg X server - core server
ii xserver-xorg-core-dbg 2:1.10.1-1ubuntu1.3
Xorg - the X.Org X server (debugging
symbols)
ii xserver-xorg-input-all 1:7.6+4ubuntu3.2
the X.Org X server -- input driver
metapackage
ii xserver-xorg-input-evdev 1:2.6.0-1ubuntu12
X.Org X server -- evdev input driver
ii xserver-xorg-input-mouse 1:1.6.0-1ubuntu3
X.Org X server -- mouse input driver
ii xserver-xorg-input-synaptics
1.3.99+git20110116.0e27ce3a-0ubuntu12.1 Synaptics
TouchPad driver for X.Org server
ii xserver-xorg-input-vmmouse 1:12.6.99.901-1ubuntu2
X.Org X server -- VMMouse input
driver to use with VMWare
ii xserver-xorg-input-wacom 1:0.10.11-0ubuntu4
X.Org X server -- Wacom input driver
ii xserver-xorg-video-all 1:7.6+4ubuntu3.2
the X.Org X server -- output driver
metapackage
ii xserver-xorg-video-apm 1:1.2.3-0ubuntu5
X.Org X server -- APM display driver
ii xserver-xorg-video-ark 1:0.7.3-1ubuntu3
X.Org X server -- ark display driver
ii xserver-xorg-video-ati 1:6.14.0-0ubuntu4.1
X.Org X server -- AMD/ATI display
driver wrapper
ii xserver-xorg-video-chips 1:1.2.3-2ubuntu5
X.Org X server -- Chips display
driver
ii xserver-xorg-video-cirrus 1:1.3.2-2ubuntu7
X.Org X server -- Cirrus display
driver
ii xserver-xorg-video-fbdev 1:0.4.2-3ubuntu6
X.Org X server -- fbdev display
driver
ii xserver-xorg-video-i128 1:1.3.4-1ubuntu3
X.Org X server -- i128 display driver
ii xserver-xorg-video-intel 2:2.14.0-4ubuntu7.3
X.Org X server -- Intel i8xx, i9xx
display driver
ii xserver-xorg-video-mach64
6.8.2+git20101202.d60087f0-4ubuntu3 X.Org X
server -- ATI Mach64 display driver
ii xserver-xorg-video-mga 1:1.4.13.dfsg-3build1
X.Org X server -- MGA display driver
ii xserver-xorg-video-neomagic 1:1.2.5-1ubuntu3
X.Org X server -- Neomagic display
driver
ii xserver-xorg-video-nouveau
1:0.0.16+git20110107+b795ca6e-0ubuntu7 X.Org X
server -- Nouveau display driver (experimental)
ii xserver-xorg-video-openchrome 1:0.2.904+svn916-1build1
X.Org X server -- VIA display driver
ii xserver-xorg-video-qxl 0.0.12-1ubuntu4
X.Org X server -- QXL display driver
ii xserver-xorg-video-r128 6.8.1-4ubuntu3
X.Org X server -- ATI r128 display
driver
ii xserver-xorg-video-radeon 1:6.14.0-0ubuntu4.1
X.Org X server -- AMD/ATI Radeon
display driver
ii xserver-xorg-video-radeon-dbg 1:6.14.0-0ubuntu4.1
X.Org X server -- AMD/ATI Radeon
display driver (debugging symbols)
Full dmesg output
-----------------------------
Please see attached.
'Please let me know if I should provide further details.
Thanks!
--
Brian Gitonga Marete
Toshnix Systems - http://toshnix.com
[-- Attachment #2: dmesg --]
[-- Type: application/octet-stream, Size: 161707 bytes --]
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr,commit=600
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
usb 2-1.2: new high-speed USB device number 62 using ehci_hcd
scsi26 : usb-storage 2-1.2:1.0
scsi 26:0:0:0: Direct-Access Ideos 0000 PQ: 0 ANSI: 2
scsi 26:0:0:1: CD-ROM Ideos 0000 PQ: 0 ANSI: 2
sd 26:0:0:0: Attached scsi generic sg2 type 0
sd 26:0:0:0: [sdb] Attached SCSI removable disk
sr1: scsi3-mmc drive: 0x/0x caddy
sr 26:0:0:1: Attached scsi CD-ROM sr1
sr 26:0:0:1: Attached scsi generic sg3 type 5
usb 2-1.2: USB disconnect, device number 62
usb 2-1.2: new high-speed USB device number 63 using ehci_hcd
scsi27 : usb-storage 2-1.2:1.0
scsi 27:0:0:0: Direct-Access Ideos 0000 PQ: 0 ANSI: 2
scsi 27:0:0:1: CD-ROM Ideos 0000 PQ: 0 ANSI: 2
sd 27:0:0:0: Attached scsi generic sg2 type 0
sr1: scsi3-mmc drive: 0x/0x caddy
sr 27:0:0:1: Attached scsi CD-ROM sr1
sr 27:0:0:1: Attached scsi generic sg3 type 5
sd 27:0:0:0: [sdb] Attached SCSI removable disk
ehci_hcd 0000:00:1a.0: setting latency timer to 64
usb 2-1.2: USB disconnect, device number 63
usb 2-1.2: new high-speed USB device number 64 using ehci_hcd
scsi28 : usb-storage 2-1.2:1.0
scsi 28:0:0:0: Direct-Access Ideos 0000 PQ: 0 ANSI: 2
scsi 28:0:0:1: CD-ROM Ideos 0000 PQ: 0 ANSI: 2
sd 28:0:0:0: Attached scsi generic sg2 type 0
sr1: scsi3-mmc drive: 0x/0x caddy
sd 28:0:0:0: [sdb] Attached SCSI removable disk
sr 28:0:0:1: Attached scsi CD-ROM sr1
sr 28:0:0:1: Attached scsi generic sg3 type 5
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr,commit=600
device tap0 entered promiscuous mode
EXT4-fs (sda1): Unaligned AIO/DIO on inode 27528880 by VirtualBox; performance will be poor.
wlan0: deauthenticated from 00:15:af:66:15:83 (Reason: 7)
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
wlan0: moving STA 00:15:af:66:15:83 to state 2
wlan0: moving STA 00:15:af:66:15:83 to state 1
wlan0: moving STA 00:15:af:66:15:83 to state 0
cfg80211: All devices are disconnected, going to restore regulatory settings
cfg80211: Restoring regulatory settings
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 00:15:af:66:15:83 (try 1)
wlan0: authenticated
wlan0: associate with 00:15:af:66:15:83 (try 1)
wlan0: RX AssocResp from 00:15:af:66:15:83 (capab=0x11 status=0 aid=1)
wlan0: associated
wlan0: moving STA 00:15:af:66:15:83 to state 1
wlan0: moving STA 00:15:af:66:15:83 to state 2
wlan0: moving STA 00:15:af:66:15:83 to state 3
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
device tap0 left promiscuous mode
vboxnetflt: dropped 0 out of 2 packets
dev_remove_pack: ffff8800ba5c86d8 not found.
ehci_hcd 0000:00:1a.0: setting latency timer to 64
usb 1-1.2: new high-speed USB device number 8 using ehci_hcd
scsi29 : usb-storage 1-1.2:1.0
scsi 29:0:0:0: Direct-Access JetFlash Transcend 4GB 1100 PQ: 0 ANSI: 0 CCS
sd 29:0:0:0: Attached scsi generic sg4 type 0
sd 29:0:0:0: [sdc] 7913472 512-byte logical blocks: (4.05 GB/3.77 GiB)
sd 29:0:0:0: [sdc] Write Protect is off
sd 29:0:0:0: [sdc] Mode Sense: 43 00 00 00
sd 29:0:0:0: [sdc] No Caching mode page present
sd 29:0:0:0: [sdc] Assuming drive cache: write through
sd 29:0:0:0: [sdc] No Caching mode page present
sd 29:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sd 29:0:0:0: [sdc] No Caching mode page present
sd 29:0:0:0: [sdc] Assuming drive cache: write through
sd 29:0:0:0: [sdc] Attached SCSI removable disk
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
usb 1-1.2: USB disconnect, device number 8
usb 2-1.2: USB disconnect, device number 64
usb 2-1.2: new high-speed USB device number 65 using ehci_hcd
scsi30 : usb-storage 2-1.2:1.0
scsi 30:0:0:0: Direct-Access Ideos 0000 PQ: 0 ANSI: 2
scsi 30:0:0:1: CD-ROM Ideos 0000 PQ: 0 ANSI: 2
sd 30:0:0:0: Attached scsi generic sg2 type 0
sr1: scsi3-mmc drive: 0x/0x caddy
sr 30:0:0:1: Attached scsi CD-ROM sr1
sr 30:0:0:1: Attached scsi generic sg3 type 5
sd 30:0:0:0: [sdb] Attached SCSI removable disk
usb 2-1.2: USB disconnect, device number 65
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr,commit=600
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
ehci_hcd 0000:00:1a.0: setting latency timer to 64
usb 1-1.2: new high-speed USB device number 9 using ehci_hcd
scsi31 : usb-storage 1-1.2:1.0
scsi 31:0:0:0: Direct-Access Ideos 0000 PQ: 0 ANSI: 2
scsi 31:0:0:1: CD-ROM Ideos 0000 PQ: 0 ANSI: 2
sd 31:0:0:0: Attached scsi generic sg2 type 0
sr1: scsi3-mmc drive: 0x/0x caddy
sr 31:0:0:1: Attached scsi CD-ROM sr1
sr 31:0:0:1: Attached scsi generic sg3 type 5
sd 31:0:0:0: [sdb] Attached SCSI removable disk
wlan0: deauthenticating from 00:15:af:66:15:83 by local choice (reason=3)
wlan0: moving STA 00:15:af:66:15:83 to state 2
wlan0: moving STA 00:15:af:66:15:83 to state 1
wlan0: moving STA 00:15:af:66:15:83 to state 0
cfg80211: All devices are disconnected, going to restore regulatory settings
cfg80211: Restoring regulatory settings
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.15 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
pciehp 0000:00:1c.4:pcie04: pciehp_suspend ENTRY
ACPI handle has no context!
ACPI handle has no context!
[drm] Disabling audio support
PM: suspend of devices complete after 769.547 msecs
PM: suspend devices took 0.790 seconds
pcieport 0000:00:1c.2: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
PM: late suspend of devices complete after 100.091 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
CPU 1 is now offline
CPU 2 is now offline
CPU 3 is now offline
Extended CMOS year: 2000
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Extended CMOS year: 2000
Enabling non-boot CPUs ...
Booting Node 0 Processor 1 APIC 0x4
smpboot cpu 1: start_ip = 98000
Calibrating delay loop (skipped) already calibrated this CPU
CPU1 is up
Booting Node 0 Processor 2 APIC 0x1
smpboot cpu 2: start_ip = 98000
Calibrating delay loop (skipped) already calibrated this CPU
CPU2 is up
Booting Node 0 Processor 3 APIC 0x5
smpboot cpu 3: start_ip = 98000
Calibrating delay loop (skipped) already calibrated this CPU
CPU3 is up
ACPI: Waking up from system sleep state S3
ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
PM: early resume of devices complete after 6.992 msecs
ehci_hcd 0000:00:1a.0: setting latency timer to 64
mei 0000:00:16.0: irq 48 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
pciehp 0000:00:1c.4:pcie04: pciehp_resume ENTRY
ehci_hcd 0000:00:1d.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
ahci 0000:00:1f.2: setting latency timer to 64
iwlwifi 0000:12:00.0: RF_KILL bit toggled to enable radio.
snd_hda_intel 0000:01:00.1: irq 51 for MSI/MSI-X
pcieport 0000:00:1c.2: wake-up capability disabled by ACPI
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
[drm] fence driver on ring 0 use gpu addr 0x40000c00 and cpu addr 0xffff880110fdac00
[drm] ring test on 0 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] Enabling audio support
usb 2-1.6: reset full-speed USB device number 53 using ehci_hcd
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata5: SATA link down (SStatus 0 SControl 300)
usb 1-1.6: reset high-speed USB device number 3 using ehci_hcd
usb 2-1.6.1: reset full-speed USB device number 54 using ehci_hcd
usb 2-1.6.2: reset full-speed USB device number 55 using ehci_hcd
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 3272.074 msecs
PM: resume devices took 3.300 seconds
PM: Finishing wakeup.
Restarting tasks ...
usb 1-1.2: USB disconnect, device number 9
done.
video LNXVIDEO:00: Restoring backlight state
usb 2-1.6.3: USB disconnect, device number 61
iwlwifi 0000:12:00.0: L1 Disabled; Enabling L0S
ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:13:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
usb 2-1.6.3: new full-speed USB device number 66 using ehci_hcd
wlan0: authenticate with 00:14:6c:fa:e3:22 (try 1)
wlan0: authenticated
wlan0: associate with 00:14:6c:fa:e3:22 (try 1)
wlan0: RX AssocResp from 00:14:6c:fa:e3:22 (capab=0x411 status=0 aid=3)
wlan0: associated
wlan0: moving STA 00:14:6c:fa:e3:22 to state 1
wlan0: moving STA 00:14:6c:fa:e3:22 to state 2
wlan0: moving STA 00:14:6c:fa:e3:22 to state 3
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr,commit=600
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr,commit=600
wlan0: no IPv6 routers present
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
usb 2-1.2: new high-speed USB device number 67 using ehci_hcd
scsi32 : usb-storage 2-1.2:1.0
scsi 32:0:0:0: Direct-Access Ideos 0000 PQ: 0 ANSI: 2
scsi 32:0:0:1: CD-ROM Ideos 0000 PQ: 0 ANSI: 2
sd 32:0:0:0: Attached scsi generic sg2 type 0
sr1: scsi3-mmc drive: 0x/0x caddy
sd 32:0:0:0: [sdb] Attached SCSI removable disk
sr 32:0:0:1: Attached scsi CD-ROM sr1
sr 32:0:0:1: Attached scsi generic sg3 type 5
ehci_hcd 0000:00:1a.0: setting latency timer to 64
usb 2-1.2: USB disconnect, device number 67
scsi 32:0:0:1: killing request
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
ehci_hcd 0000:00:1a.0: setting latency timer to 64
usb 2-1.2: new high-speed USB device number 68 using ehci_hcd
scsi33 : usb-storage 2-1.2:1.0
scsi 33:0:0:0: Direct-Access Ideos 0000 PQ: 0 ANSI: 2
scsi 33:0:0:1: CD-ROM Ideos 0000 PQ: 0 ANSI: 2
sd 33:0:0:0: Attached scsi generic sg2 type 0
sd 33:0:0:0: [sdb] Attached SCSI removable disk
sr1: scsi3-mmc drive: 0x/0x caddy
sr 33:0:0:1: Attached scsi CD-ROM sr1
sr 33:0:0:1: Attached scsi generic sg3 type 5
type=1400 audit(1338295261.405:30): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=32308 comm="apparmor_parser"
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: setting latency timer to 64
compiz[32594] general protection ip:7f7a05745394 sp:7fff82b47550 error:0 in libpthread-2.13.so[7f7a0573c000+18000]
wlan0: deauthenticating from 00:14:6c:fa:e3:22 by local choice (reason=3)
wlan0: moving STA 00:14:6c:fa:e3:22 to state 2
wlan0: moving STA 00:14:6c:fa:e3:22 to state 1
wlan0: moving STA 00:14:6c:fa:e3:22 to state 0
cfg80211: All devices are disconnected, going to restore regulatory settings
cfg80211: Restoring regulatory settings
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.03 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
ehci_hcd 0000:00:1a.0: setting latency timer to 64
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
ACPI handle has no context!
pciehp 0000:00:1c.4:pcie04: pciehp_suspend ENTRY
ACPI handle has no context!
[drm] Disabling audio support
PM: suspend of devices complete after 649.600 msecs
PM: suspend devices took 0.690 seconds
pcieport 0000:00:1c.2: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
PM: late suspend of devices complete after 100.030 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
CPU 1 is now offline
CPU 2 is now offline
CPU 3 is now offline
Extended CMOS year: 2000
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Extended CMOS year: 2000
Enabling non-boot CPUs ...
Booting Node 0 Processor 1 APIC 0x4
smpboot cpu 1: start_ip = 98000
Calibrating delay loop (skipped) already calibrated this CPU
CPU1 is up
Booting Node 0 Processor 2 APIC 0x1
smpboot cpu 2: start_ip = 98000
Calibrating delay loop (skipped) already calibrated this CPU
CPU2 is up
Booting Node 0 Processor 3 APIC 0x5
smpboot cpu 3: start_ip = 98000
Calibrating delay loop (skipped) already calibrated this CPU
CPU3 is up
ACPI: Waking up from system sleep state S3
ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
PM: early resume of devices complete after 6.895 msecs
ehci_hcd 0000:00:1a.0: setting latency timer to 64
mei 0000:00:16.0: irq 48 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
pciehp 0000:00:1c.4:pcie04: pciehp_resume ENTRY
ehci_hcd 0000:00:1d.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
ahci 0000:00:1f.2: setting latency timer to 64
pcieport 0000:00:1c.2: wake-up capability disabled by ACPI
iwlwifi 0000:12:00.0: RF_KILL bit toggled to enable radio.
snd_hda_intel 0000:01:00.1: irq 51 for MSI/MSI-X
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
[drm] fence driver on ring 0 use gpu addr 0x40000c00 and cpu addr 0xffff880110fdac00
[drm] ring test on 0 succeeded in 0 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] Enabling audio support
usb 1-1.6: reset high-speed USB device number 3 using ehci_hcd
ata5: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
usb 2-1.6: reset full-speed USB device number 53 using ehci_hcd
usb 2-1.6.1: reset full-speed USB device number 54 using ehci_hcd
usb 2-1.6.2: reset full-speed USB device number 55 using ehci_hcd
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 3295.622 msecs
PM: resume devices took 3.320 seconds
PM: Finishing wakeup.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
usb 1-1.2: new high-speed USB device number 10 using ehci_hcd
scsi34 : usb-storage 1-1.2:1.0
usb 2-1.2: USB disconnect, device number 68
scsi 33:0:0:0: killing request
usb 2-1.6.3: USB disconnect, device number 66
scsi 34:0:0:0: Direct-Access Ideos 0000 PQ: 0 ANSI: 2
scsi 34:0:0:1: CD-ROM Ideos 0000 PQ: 0 ANSI: 2
sd 34:0:0:0: Attached scsi generic sg2 type 0
sr1: scsi3-mmc drive: 0x/0x caddy
sr 34:0:0:1: Attached scsi CD-ROM sr1
sr 34:0:0:1: Attached scsi generic sg3 type 5
sd 34:0:0:0: [sdb] Attached SCSI removable disk
iwlwifi 0000:12:00.0: L1 Disabled; Enabling L0S
ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:13:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
usb 2-1.6.3: new full-speed USB device number 69 using ehci_hcd
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0
iwlwifi 0000:12:00.0: RF_KILL bit toggled to disable radio.
keyboard: can't emulate rawmode for keycode 240
keyboard: can't emulate rawmode for keycode 240
iwlwifi 0000:12:00.0: Command REPLY_RXON aborted: RF KILL Switch
generic-usb 0003:413C:8161.000D: can't reset device, 0000:00:1d.0-1.6.1/input0, status -32
generic-usb 0003:413C:8161.000D: can't reset device, 0000:00:1d.0-1.6.1/input0, status -32
usb 2-1.6: USB disconnect, device number 53
usb 2-1.6.1: USB disconnect, device number 54
usb 2-1.6.2: USB disconnect, device number 55
usb 2-1.6.3: USB disconnect, device number 69
usb 1-1.2: USB disconnect, device number 10
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
ehci_hcd 0000:00:1d.0: setting latency timer to 64
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
ACPI handle has no context!
pciehp 0000:00:1c.4:pcie04: pciehp_suspend ENTRY
ACPI handle has no context!
[drm] Disabling audio support
PM: suspend of devices complete after 619.817 msecs
PM: suspend devices took 0.660 seconds
pcieport 0000:00:1c.2: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
PM: late suspend of devices complete after 99.827 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
CPU 1 is now offline
CPU 2 is now offline
Broke affinity for irq 12
CPU 3 is now offline
Extended CMOS year: 2000
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Extended CMOS year: 2000
Enabling non-boot CPUs ...
Booting Node 0 Processor 1 APIC 0x4
smpboot cpu 1: start_ip = 98000
Calibrating delay loop (skipped) already calibrated this CPU
CPU1 is up
Booting Node 0 Processor 2 APIC 0x1
smpboot cpu 2: start_ip = 98000
Calibrating delay loop (skipped) already calibrated this CPU
CPU2 is up
Booting Node 0 Processor 3 APIC 0x5
smpboot cpu 3: start_ip = 98000
Calibrating delay loop (skipped) already calibrated this CPU
CPU3 is up
ACPI: Waking up from system sleep state S3
ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
PM: early resume of devices complete after 6.802 msecs
ehci_hcd 0000:00:1a.0: setting latency timer to 64
mei 0000:00:16.0: irq 48 for MSI/MSI-X
pciehp 0000:00:1c.4:pcie04: pciehp_resume ENTRY
snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
ehci_hcd 0000:00:1d.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
ahci 0000:00:1f.2: setting latency timer to 64
pcieport 0000:00:1c.2: wake-up capability disabled by ACPI
iwlwifi 0000:12:00.0: RF_KILL bit toggled to disable radio.
snd_hda_intel 0000:01:00.1: irq 51 for MSI/MSI-X
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
[drm] fence driver on ring 0 use gpu addr 0x40000c00 and cpu addr 0xffff880110fdac00
[drm] ring test on 0 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] Enabling audio support
usb 1-1.6: reset high-speed USB device number 3 using ehci_hcd
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata5: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 3293.250 msecs
PM: resume devices took 3.320 seconds
PM: Finishing wakeup.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
r8169 0000:13:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr,commit=600
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr,commit=600
iwlwifi 0000:12:00.0: RF_KILL bit toggled to enable radio.
keyboard: can't emulate rawmode for keycode 240
keyboard: can't emulate rawmode for keycode 240
ehci_hcd 0000:00:1d.0: setting latency timer to 64
usb 2-1.6: new full-speed USB device number 70 using ehci_hcd
hub 2-1.6:1.0: USB hub found
hub 2-1.6:1.0: 3 ports detected
usb 2-1.6.1: new full-speed USB device number 71 using ehci_hcd
iwlwifi 0000:12:00.0: L1 Disabled; Enabling L0S
input: HID 413c:8161 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.1/2-1.6.1:1.0/input/input26
generic-usb 0003:413C:8161.000F: input,hidraw0: USB HID v1.11 Keyboard [HID 413c:8161] on usb-0000:00:1d.0-1.6.1/input0
ADDRCONF(NETDEV_UP): wlan0: link is not ready
usb 2-1.6.2: new full-speed USB device number 72 using ehci_hcd
input: HID 413c:8162 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.2/2-1.6.2:1.0/input/input27
generic-usb 0003:413C:8162.0010: input,hidraw1: USB HID v1.11 Mouse [HID 413c:8162] on usb-0000:00:1d.0-1.6.2/input0
cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
usb 2-1.6.3: new full-speed USB device number 73 using ehci_hcd
wlan0: authenticate with b8:c7:5d:09:51:51 (try 1)
wlan0: authenticated
wlan0: associate with b8:c7:5d:09:51:51 (try 1)
wlan0: RX AssocResp from b8:c7:5d:09:51:51 (capab=0x431 status=0 aid=28)
wlan0: associated
wlan0: moving STA b8:c7:5d:09:51:51 to state 1
wlan0: moving STA b8:c7:5d:09:51:51 to state 2
wlan0: moving STA b8:c7:5d:09:51:51 to state 3
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: US
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Disabling freq 2467 MHz
cfg80211: Disabling freq 2472 MHz
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: setting latency timer to 64
wlan0: deauthenticated from b8:c7:5d:09:51:51 (Reason: 14)
wlan0: moving STA b8:c7:5d:09:51:51 to state 2
wlan0: moving STA b8:c7:5d:09:51:51 to state 1
wlan0: moving STA b8:c7:5d:09:51:51 to state 0
cfg80211: All devices are disconnected, going to restore regulatory settings
cfg80211: Restoring regulatory settings
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with b8:c7:5d:09:51:51 (try 1)
wlan0: authenticate with b8:c7:5d:09:51:51 (try 2)
wlan0: authenticate with b8:c7:5d:09:51:51 (try 3)
wlan0: authentication with b8:c7:5d:09:51:51 timed out
wlan0: authenticate with b8:c7:5d:09:51:51 (try 1)
wlan0: authenticate with b8:c7:5d:09:51:51 (try 2)
wlan0: authenticate with b8:c7:5d:09:51:51 (try 3)
wlan0: authentication with b8:c7:5d:09:51:51 timed out
wlan0: authenticate with b8:c7:5d:09:51:51 (try 1)
wlan0: authenticate with b8:c7:5d:09:51:51 (try 2)
wlan0: authenticate with b8:c7:5d:09:51:51 (try 3)
wlan0: authentication with b8:c7:5d:09:51:51 timed out
wlan0: authenticate with b8:c7:5d:09:51:51 (try 1)
wlan0: authenticate with b8:c7:5d:09:51:51 (try 2)
wlan0: authenticate with b8:c7:5d:09:51:51 (try 3)
wlan0: authentication with b8:c7:5d:09:51:51 timed out
wlan0: authenticate with b8:c7:5d:09:51:51 (try 1)
wlan0: authenticate with b8:c7:5d:09:51:51 (try 2)
wlan0: authenticate with b8:c7:5d:09:51:51 (try 3)
wlan0: authentication with b8:c7:5d:09:51:51 timed out
wlan0: authenticate with b8:c7:5d:09:51:51 (try 1)
wlan0: authenticated
wlan0: waiting for beacon from b8:c7:5d:09:51:51
wlan0: beacon received
wlan0: associate with b8:c7:5d:09:51:51 (try 1)
wlan0: RX AssocResp from b8:c7:5d:09:51:51 (capab=0x431 status=0 aid=6)
wlan0: associated
wlan0: moving STA b8:c7:5d:09:51:51 to state 1
wlan0: moving STA b8:c7:5d:09:51:51 to state 2
wlan0: moving STA b8:c7:5d:09:51:51 to state 3
cfg80211: Calling CRDA for country: US
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Disabling freq 2467 MHz
cfg80211: Disabling freq 2472 MHz
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0
ehci_hcd 0000:00:1a.0: setting latency timer to 64
usb 1-1.2: new high-speed USB device number 11 using ehci_hcd
scsi35 : usb-storage 1-1.2:1.0
scsi 35:0:0:0: Direct-Access Ideos 0000 PQ: 0 ANSI: 2
scsi 35:0:0:1: CD-ROM Ideos 0000 PQ: 0 ANSI: 2
sd 35:0:0:0: Attached scsi generic sg2 type 0
sd 35:0:0:0: [sdb] Attached SCSI removable disk
sr1: scsi3-mmc drive: 0x/0x caddy
sr 35:0:0:1: Attached scsi CD-ROM sr1
sr 35:0:0:1: Attached scsi generic sg3 type 5
wlan0: deauthenticating from b8:c7:5d:09:51:51 by local choice (reason=3)
wlan0: moving STA b8:c7:5d:09:51:51 to state 2
wlan0: moving STA b8:c7:5d:09:51:51 to state 1
wlan0: moving STA b8:c7:5d:09:51:51 to state 0
cfg80211: All devices are disconnected, going to restore regulatory settings
cfg80211: Restoring regulatory settings
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
pciehp 0000:00:1c.4:pcie04: pciehp_suspend ENTRY
ACPI handle has no context!
ACPI handle has no context!
[drm] Disabling audio support
PM: suspend of devices complete after 619.674 msecs
PM: suspend devices took 0.640 seconds
pcieport 0000:00:1c.2: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
PM: late suspend of devices complete after 99.949 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
CPU 1 is now offline
CPU 2 is now offline
CPU 3 is now offline
Extended CMOS year: 2000
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Extended CMOS year: 2000
Enabling non-boot CPUs ...
Booting Node 0 Processor 1 APIC 0x4
smpboot cpu 1: start_ip = 98000
Calibrating delay loop (skipped) already calibrated this CPU
CPU1 is up
Booting Node 0 Processor 2 APIC 0x1
smpboot cpu 2: start_ip = 98000
Calibrating delay loop (skipped) already calibrated this CPU
CPU2 is up
Booting Node 0 Processor 3 APIC 0x5
smpboot cpu 3: start_ip = 98000
Calibrating delay loop (skipped) already calibrated this CPU
CPU3 is up
ACPI: Waking up from system sleep state S3
ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
PM: early resume of devices complete after 6.900 msecs
ehci_hcd 0000:00:1a.0: setting latency timer to 64
mei 0000:00:16.0: irq 48 for MSI/MSI-X
pciehp 0000:00:1c.4:pcie04: pciehp_resume ENTRY
snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
ehci_hcd 0000:00:1d.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
iwlwifi 0000:12:00.0: RF_KILL bit toggled to enable radio.
snd_hda_intel 0000:01:00.1: irq 51 for MSI/MSI-X
ahci 0000:00:1f.2: setting latency timer to 64
pcieport 0000:00:1c.2: wake-up capability disabled by ACPI
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
[drm] fence driver on ring 0 use gpu addr 0x40000c00 and cpu addr 0xffff880110fdac00
[drm] ring test on 0 succeeded in 0 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] Enabling audio support
Extended CMOS year: 2000
usb 2-1.6: reset full-speed USB device number 70 using ehci_hcd
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata5: SATA link down (SStatus 0 SControl 300)
usb 1-1.6: reset high-speed USB device number 3 using ehci_hcd
usb 1-1.2: reset high-speed USB device number 11 using ehci_hcd
usb 2-1.6.1: reset full-speed USB device number 71 using ehci_hcd
usb 2-1.6.2: reset full-speed USB device number 72 using ehci_hcd
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 3354.211 msecs
PM: resume devices took 3.380 seconds
PM: Finishing wakeup.
Restarting tasks ...
usb 2-1.6.3: USB disconnect, device number 73
done.
video LNXVIDEO:00: Restoring backlight state
iwlwifi 0000:12:00.0: L1 Disabled; Enabling L0S
ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:13:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
usb 2-1.6.3: new full-speed USB device number 74 using ehci_hcd
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr,commit=600
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr,commit=600
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0
PM: Marking nosave pages: 000000000009d000 - 0000000000100000
PM: Marking nosave pages: 00000000bf5a7000 - 00000000bf620000
PM: Marking nosave pages: 00000000bf621000 - 00000000bf694000
PM: Marking nosave pages: 00000000bf800000 - 0000000100000000
PM: Basic memory bitmaps created
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.01 seconds) done.
PM: Preallocating image memory... done (allocated 620736 pages)
PM: Allocated 2482944 kbytes in 12.08 seconds (205.54 MB/s)
Freezing remaining freezable tasks ... (elapsed 0.11 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
ACPI handle has no context!
pciehp 0000:00:1c.4:pcie04: pciehp_suspend ENTRY
ACPI handle has no context!
[drm] Disabling audio support
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ata5: SATA link down (SStatus 0 SControl 300)
PM: freeze of devices complete after 840.384 msecs
PM: late freeze of devices complete after 0.818 msecs
ACPI: Preparing to enter system sleep state S4
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
CPU 1 is now offline
CPU 2 is now offline
CPU 3 is now offline
Extended CMOS year: 2000
PM: Creating hibernation image:
PM: Need to copy 374235 pages
PM: Normal pages needed: 374235 + 1024, available pages: 639093
PM: Restoring platform NVS memory
Extended CMOS year: 2000
Enabling non-boot CPUs ...
Booting Node 0 Processor 1 APIC 0x4
smpboot cpu 1: start_ip = 98000
Calibrating delay loop (skipped) already calibrated this CPU
CPU1 is up
Booting Node 0 Processor 2 APIC 0x1
smpboot cpu 2: start_ip = 98000
Calibrating delay loop (skipped) already calibrated this CPU
CPU2 is up
Booting Node 0 Processor 3 APIC 0x5
smpboot cpu 3: start_ip = 98000
Calibrating delay loop (skipped) already calibrated this CPU
CPU3 is up
ACPI: Waking up from system sleep state S4
PM: early restore of devices complete after 1.322 msecs
ehci_hcd 0000:00:1a.0: setting latency timer to 64
usb usb1: root hub lost power or was reset
mei 0000:00:16.0: irq 48 for MSI/MSI-X
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
pciehp 0000:00:1c.4:pcie04: pciehp_resume ENTRY
ehci_hcd 0000:00:1d.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
usb usb2: root hub lost power or was reset
ahci 0000:00:1f.2: setting latency timer to 64
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
iwlwifi 0000:12:00.0: RF_KILL bit toggled to enable radio.
snd_hda_intel 0000:01:00.1: irq 51 for MSI/MSI-X
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
[drm] fence driver on ring 0 use gpu addr 0x40000c00 and cpu addr 0xffff880110fdac00
[drm] ring test on 0 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] Enabling audio support
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
usb 2-1: reset high-speed USB device number 2 using ehci_hcd
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata5: SATA link down (SStatus 0 SControl 300)
sd 0:0:0:0: [sda] Starting disk
usb 1-1: reset high-speed USB device number 2 using ehci_hcd
usb 2-1.6: reset full-speed USB device number 70 using ehci_hcd
usb 1-1.6: reset high-speed USB device number 3 using ehci_hcd
usb 2-1.6.2: reset full-speed USB device number 72 using ehci_hcd
usb 2-1.6.1: reset full-speed USB device number 71 using ehci_hcd
PM: restore of devices complete after 1603.209 msecs
PM: Image restored successfully.
Restarting tasks ... done.
PM: Basic memory bitmaps freed
usb 1-1.2: USB disconnect, device number 11
usb 2-1.6.3: USB disconnect, device number 74
video LNXVIDEO:00: Restoring backlight state
ehci_hcd 0000:00:1a.0: setting latency timer to 64
usb 1-1.2: new high-speed USB device number 12 using ehci_hcd
scsi36 : usb-storage 1-1.2:1.0
scsi 36:0:0:0: Direct-Access Ideos 0000 PQ: 0 ANSI: 2
scsi 36:0:0:1: CD-ROM Ideos 0000 PQ: 0 ANSI: 2
sd 36:0:0:0: Attached scsi generic sg2 type 0
sr1: scsi3-mmc drive: 0x/0x caddy
sr 36:0:0:1: Attached scsi CD-ROM sr1
sr 36:0:0:1: Attached scsi generic sg3 type 5
sd 36:0:0:0: [sdb] Attached SCSI removable disk
usb 2-1.6.3: new full-speed USB device number 75 using ehci_hcd
usb 1-1.2: USB disconnect, device number 12
usb 1-1.2: new high-speed USB device number 13 using ehci_hcd
scsi37 : usb-storage 1-1.2:1.0
scsi 37:0:0:0: Direct-Access Ideos 0000 PQ: 0 ANSI: 2
scsi 37:0:0:1: CD-ROM Ideos 0000 PQ: 0 ANSI: 2
sd 37:0:0:0: Attached scsi generic sg2 type 0
sr1: scsi3-mmc drive: 0x/0x caddy
sr 37:0:0:1: Attached scsi CD-ROM sr1
sr 37:0:0:1: Attached scsi generic sg3 type 5
sd 37:0:0:0: [sdb] Attached SCSI removable disk
iwlwifi 0000:12:00.0: L1 Disabled; Enabling L0S
ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:13:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0
iwlwifi 0000:12:00.0: RF_KILL bit toggled to disable radio.
iwlwifi 0000:12:00.0: Command REPLY_RXON aborted: RF KILL Switch
keyboard: can't emulate rawmode for keycode 240
keyboard: can't emulate rawmode for keycode 240
generic-usb 0003:413C:8161.000F: can't reset device, 0000:00:1d.0-1.6.1/input0, status -32
generic-usb 0003:413C:8161.000F: can't reset device, 0000:00:1d.0-1.6.1/input0, status -32
generic-usb 0003:413C:8161.000F: can't reset device, 0000:00:1d.0-1.6.1/input0, status -32
generic-usb 0003:413C:8161.000F: can't reset device, 0000:00:1d.0-1.6.1/input0, status -32
generic-usb 0003:413C:8161.000F: can't reset device, 0000:00:1d.0-1.6.1/input0, status -32
usb 2-1.6: USB disconnect, device number 70
usb 2-1.6.1: USB disconnect, device number 71
usb 2-1.6.2: USB disconnect, device number 72
usb 2-1.6.3: USB disconnect, device number 75
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
JFS: nTxBlock = 8192, nTxLock = 65536
NTFS driver 2.1.30 [Flags: R/O MODULE].
QNX4 filesystem 0.2.3 registered.
Btrfs loaded
May 31 22:57:29 phyllis kernel: Kernel logging (proc) stopped.
May 31 22:58:55 phyllis kernel: imklog 4.6.4, log source = /proc/kmsg started.
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.4.0 (marebri@phyllis) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #1 SMP Thu May 31 22:03:44 EAT 2012
Command line: BOOT_IMAGE=/boot/vmlinuz-3.4.0 root=UUID=89da4c87-2589-4741-9115-c34de11b3aa4 ro crashkernel=384M-2G:64M,2G-:128M quiet splash
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bf5a7000 (usable)
BIOS-e820: 00000000bf5a7000 - 00000000bf5ef000 (ACPI NVS)
BIOS-e820: 00000000bf5ef000 - 00000000bf5f9000 (ACPI data)
BIOS-e820: 00000000bf5f9000 - 00000000bf5fc000 (ACPI NVS)
BIOS-e820: 00000000bf5fc000 - 00000000bf620000 (reserved)
BIOS-e820: 00000000bf620000 - 00000000bf621000 (usable)
BIOS-e820: 00000000bf621000 - 00000000bf629000 (ACPI NVS)
BIOS-e820: 00000000bf629000 - 00000000bf62c000 (reserved)
BIOS-e820: 00000000bf62c000 - 00000000bf631000 (ACPI NVS)
BIOS-e820: 00000000bf631000 - 00000000bf651000 (reserved)
BIOS-e820: 00000000bf651000 - 00000000bf694000 (ACPI NVS)
BIOS-e820: 00000000bf694000 - 00000000bf800000 (usable)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
NX (Execute Disable) protection: active
DMI 2.6 present.
DMI: Dell Inc. Inspiron N5010/0YXXJJ, BIOS A10 11/17/2010
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x138000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F00000000 write-back
1 base 100000000 mask FC0000000 write-back
2 base 0C0000000 mask FC0000000 uncachable
3 base 138000000 mask FF8000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbf800 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000fcdb0] fcdb0
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff880000098000] 98000 size 20480
init_memory_mapping: 0000000000000000-00000000bf800000
0000000000 - 00bf800000 page 2M
kernel direct mapping tables up to bf800000 @ 1fffc000-20000000
init_memory_mapping: 0000000100000000-0000000138000000
0100000000 - 0138000000 page 2M
kernel direct mapping tables up to 138000000 @ bf7fa000-bf800000
RAMDISK: 256dc000 - 2eb66000
Reserving 128MB of memory at 768MB for crashkernel (System RAM: 3958MB)
ACPI: RSDP 00000000000f0410 00024 (v03 DELL )
ACPI: XSDT 00000000bf5ef080 00054 (v01 DELL WN09 01072009 AMI 00010013)
ACPI: FACP 00000000bf5f8a48 000F4 (v04 DELL WN09 01072009 AMI 00010013)
ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20120320/tbfadt-378)
ACPI Warning: 32/64X FACS address mismatch in FADT - 0xBF62CF40/0x00000000BF62CF80, using 32 (20120320/tbfadt-502)
ACPI: DSDT 00000000bf5ef168 098DF (v02 DELL WN09 00005010 INTL 20051117)
ACPI: FACS 00000000bf62cf40 00040
ACPI: APIC 00000000bf5f8b40 00072 (v01 DELL WN09 01072009 AMI 00010013)
ACPI: SSDT 00000000bf5f8bb8 0014E (v01 AMICPU PROC 00000001 MSFT 03000001)
ACPI: MCFG 00000000bf5f8d08 0003C (v01 DELL WN09 01072009 MSFT 00000097)
ACPI: HPET 00000000bf5f8d48 00038 (v01 DELL WN09 01072009 AMI. 00000003)
ACPI: OSFR 00000000bf5f8d80 0008C (v01 DELL M08 07DA0B11 ASL 00000061)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-0000000138000000
Initmem setup node 0 0000000000000000-0000000138000000
NODE_DATA [0000000137ffc000 - 0000000137ffffff]
[ffffea0000000000-ffffea0004dfffff] PMD -> [ffff880133800000-ffff8801375fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00138000
Movable zone start PFN for each node
Early memory PFN ranges
0: 0x00000010 -> 0x0000009d
0: 0x00000100 -> 0x000bf5a7
0: 0x000bf620 -> 0x000bf621
0: 0x000bf694 -> 0x000bf800
0: 0x00100000 -> 0x00138000
On node 0 totalpages: 1013409
DMA zone: 64 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3912 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 763732 pages, LIFO batch:31
Normal zone: 3584 pages used for memmap
Normal zone: 225792 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bf5a7000 - 00000000bf5ef000
PM: Registered nosave memory: 00000000bf5ef000 - 00000000bf5f9000
PM: Registered nosave memory: 00000000bf5f9000 - 00000000bf5fc000
PM: Registered nosave memory: 00000000bf5fc000 - 00000000bf620000
PM: Registered nosave memory: 00000000bf621000 - 00000000bf629000
PM: Registered nosave memory: 00000000bf629000 - 00000000bf62c000
PM: Registered nosave memory: 00000000bf62c000 - 00000000bf631000
PM: Registered nosave memory: 00000000bf631000 - 00000000bf651000
PM: Registered nosave memory: 00000000bf651000 - 00000000bf694000
PM: Registered nosave memory: 00000000bf800000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at bf800000 (gap: bf800000:20800000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff880137c00000 s82752 r8192 d23744 u524288
pcpu-alloc: s82752 r8192 d23744 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 993436
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.4.0 root=UUID=89da4c87-2589-4741-9115-c34de11b3aa4 ro crashkernel=384M-2G:64M,2G-:128M quiet splash
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3624952k/5111808k available (6259k kernel code, 1058172k absent, 428684k reserved, 6818k data, 892k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:4352 nr_irqs:712 16
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 16252928 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2526.910 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5053.82 BogoMIPS (lpj=25269100)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20120320
ftrace: allocating 23425 entries in 92 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i5 CPU M 460 @ 2.53GHz stepping 05
Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Booting Node 0, Processors #1 #2 #3 Ok.
Brought up 4 CPUs
Total of 4 processors activated (20215.28 BogoMIPS).
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xbf5a7000-0xbf5eefff] (294912 bytes)
PM: Registering ACPI NVS region [mem 0xbf5f9000-0xbf5fbfff] (12288 bytes)
PM: Registering ACPI NVS region [mem 0xbf621000-0xbf628fff] (32768 bytes)
PM: Registering ACPI NVS region [mem 0xbf62c000-0xbf630fff] (20480 bytes)
PM: Registering ACPI NVS region [mem 0xbf651000-0xbf693fff] (274432 bytes)
dummy:
RTC time: 19:58:36, date: 05/31/12
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000bf621c18 003A4 (v01 AMI IST 00000001 MSFT 03000001)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 003A4 (v01 AMI IST 00000001 MSFT 03000001)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xffffffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
pci 0000:00:16.0: reg 10: [mem 0xfbf09000-0xfbf0900f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 10: [mem 0xfbf08000-0xfbf083ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xfbf00000-0xfbf03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 10: [mem 0xfbf07000-0xfbf073ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1f.0: [8086:3b0b] type 00 class 0x060100
pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 24: [mem 0xfbf06000-0xfbf067ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xfbf05000-0xfbf050ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
pci 0000:00:1f.6: reg 10: [mem 0xfbf04000-0xfbf04fff 64bit]
pci 0000:01:00.0: [1002:68c1] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xfbe20000-0xfbe3ffff 64bit]
pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 30: [mem 0xfbe00000-0xfbe1ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa60] type 00 class 0x040300
pci 0000:01:00.1: reg 10: [mem 0xfbe40000-0xfbe43fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 11-11]
pci 0000:12:00.0: [8086:0083] type 00 class 0x028000
pci 0000:12:00.0: reg 10: [mem 0xfbd00000-0xfbd01fff 64bit]
pci 0000:12:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 12-12]
pci 0000:00:1c.1: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:13:00.0: [10ec:8136] type 00 class 0x020000
pci 0000:13:00.0: reg 10: [io 0xd000-0xd0ff]
pci 0000:13:00.0: reg 18: [mem 0xd0c10000-0xd0c10fff 64bit pref]
pci 0000:13:00.0: reg 20: [mem 0xd0c00000-0xd0c0ffff 64bit pref]
pci 0000:13:00.0: reg 30: [mem 0xfb300000-0xfb31ffff pref]
pci 0000:13:00.0: supports D1 D2
pci 0000:13:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 13-13]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xfb300000-0xfbcfffff]
pci 0000:00:1c.2: bridge window [mem 0xd0c00000-0xd15fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 15-15]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xfa900000-0xfb2fffff]
pci 0000:00:1c.4: bridge window [mem 0xd0100000-0xd0afffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 20-20] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x19) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
wmi: Mapper loaded
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus ff
PCI: root bus ff: using default resources
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009d400 - 000000000009ffff
reserve RAM buffer: 00000000bf5a7000 - 00000000bfffffff
reserve RAM buffer: 00000000bf621000 - 00000000bfffffff
reserve RAM buffer: 00000000bf800000 - 00000000bfffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x00000000 window]
pnp 00:00: [mem 0xc0000000-0xffffffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfed14000-0xfed19fff]
pnp 00:01: [mem 0xe0000000-0xefffffff]
pnp 00:01: [mem 0xfed90000-0xfed93fff]
pnp 00:01: [mem 0xfed20000-0xfed3ffff]
pnp 00:01: [mem 0xfee00000-0xfee0ffff]
system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0081-0x0083]
pnp 00:02: [io 0x0087]
pnp 00:02: [io 0x0089-0x008b]
pnp 00:02: [io 0x008f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x0070-0x0071]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io 0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [io 0x00f0-0x00ff]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [io 0x0010-0x001f]
pnp 00:06: [io 0x0022-0x003f]
pnp 00:06: [io 0x0044-0x005f]
pnp 00:06: [io 0x0068-0x006f]
pnp 00:06: [io 0x0072-0x007f]
pnp 00:06: [io 0x0080]
pnp 00:06: [io 0x0084-0x0086]
pnp 00:06: [io 0x0088]
pnp 00:06: [io 0x008c-0x008e]
pnp 00:06: [io 0x0090-0x009f]
pnp 00:06: [io 0x00a2-0x00bf]
pnp 00:06: [io 0x00e0-0x00ef]
pnp 00:06: [io 0x04d0-0x04d1]
pnp 00:06: [mem 0xfe800000-0xfe8001ff]
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: [mem 0xfe800000-0xfe8001ff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [irq 12]
pnp 00:07: Plug and Play ACPI device, IDs DLL0447 SYN0600 SYN0002 PNP0f13 (active)
pnp 00:08: [io 0x0060]
pnp 00:08: [io 0x0064]
pnp 00:08: [io 0x0062]
pnp 00:08: [io 0x0066]
pnp 00:08: [irq 1]
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:09: [io 0x0400-0x047f]
pnp 00:09: [io 0x1180-0x119f]
pnp 00:09: [io 0x0500-0x057f]
pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
pnp 00:09: [mem 0xfec00000-0xfecfffff]
pnp 00:09: [mem 0xfed08000-0xfed08fff]
pnp 00:09: [mem 0xff000000-0xffffffff]
system 00:09: [io 0x0400-0x047f] has been reserved
system 00:09: [io 0x1180-0x119f] has been reserved
system 00:09: [io 0x0500-0x057f] has been reserved
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:09: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:09: [mem 0xff000000-0xffffffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0a: [mem 0xfed00000-0xfed003ff]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 11-11] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 11-11] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 11-11] add_size 200000
pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 12-12] add_size 1000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 12-12] add_size 200000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xd1600000-0xd17fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xd1800000-0xd19fffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xd1a00000-0xd1bfffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 11-11]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xd1600000-0xd17fffff]
pci 0000:00:1c.0: bridge window [mem 0xd1800000-0xd19fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 12-12]
pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.1: bridge window [mem 0xd1a00000-0xd1bfffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 13-13]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xfb300000-0xfbcfffff]
pci 0000:00:1c.2: bridge window [mem 0xd0c00000-0xd15fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 15-15]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xfa900000-0xfb2fffff]
pci 0000:00:1c.4: bridge window [mem 0xd0100000-0xd0afffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 20-20]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:11: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:11: resource 1 [mem 0xd1600000-0xd17fffff]
pci_bus 0000:11: resource 2 [mem 0xd1800000-0xd19fffff 64bit pref]
pci_bus 0000:12: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:12: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:12: resource 2 [mem 0xd1a00000-0xd1bfffff 64bit pref]
pci_bus 0000:13: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:13: resource 1 [mem 0xfb300000-0xfbcfffff]
pci_bus 0000:13: resource 2 [mem 0xd0c00000-0xd15fffff 64bit pref]
pci_bus 0000:15: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:15: resource 1 [mem 0xfa900000-0xfb2fffff]
pci_bus 0000:15: resource 2 [mem 0xd0100000-0xd0afffff 64bit pref]
pci_bus 0000:20: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:20: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:20: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:20: resource 7 [mem 0xc0000000-0xffffffff]
pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 152104k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800bb5a7000 - ffff8800bf5a7000
software IO TLB at phys 0xbb5a7000 - 0xbf5a7000
audit: initializing netlink socket (disabled)
type=2000 audit(1338494319.360:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.18)
msgmni has been set to 7377
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: Using ACPI for slot detection.
pciehp 0000:00:1c.4:pcie04: HPC vendor_id 8086 device_id 3b4a ss_vid 1028 ss_did 447
pciehp 0000:00:1c.4:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x25
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [AC] (on-line)
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID0]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM] (52 C)
GHES: HEST is not enabled!
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfbf08000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbf07000
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery present)
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.3.0 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 12:781:1002
pnp 00:04: hash matches
rtc_cmos 00:03: setting system clock to 2012-05-31 19:58:39 UTC (1338494319)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 892k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1912k freed
Freeing unused kernel memory: 1388k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:13:00.0: irq 45 for MSI/MSI-X
r8169 0000:13:00.0: eth0: RTL8102e at 0xffffc9000067e000, f0:4d:a2:bc:d8:d6, XID 04e00000 IRQ 45
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x13 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems sxs apst
ahci 0000:00:1f.2: setting latency timer to 64
[drm] Initialized drm 1.1.0 20060810
ACPI Warning: _BQC returned an invalid level (20120320/video-472)
acpi device:03: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input5
ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06100 irq 46
ata2: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06180 irq 46
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06300 irq 46
ata6: DUMMY
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (REDWOOD 0x1002:0x68C1 0x1028:0x0447).
[drm] register mmio base: 0xFBE20000
[drm] register mmio size: 131072
ATOM BIOS: Dell
radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 1890624 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: irq 47 for MSI/MSI-X
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] radeon: ib pool ready.
[drm] Loading REDWOOD Microcode
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
[drm] fence driver on ring 0 use gpu addr 0x40000c00 and cpu addr 0xffff88010e4a2c00
[drm] ring test on 0 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] Enabling audio support
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] LVDS
[drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[drm] Encoders:
[drm] LCD1: INTERNAL_UNIPHY
[drm] Connector 1:
[drm] HDMI-A
[drm] HPD1
[drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY1
[drm] Connector 2:
[drm] VGA
[drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Internal thermal controller with fan control
[drm] radeon: power management initialized
usb 1-1: new high-speed USB device number 2 using ehci_hcd
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
ata5: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD5000BEKT-75KA9T0, 01.01A01, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: ATAPI: PLDS DVD+/-RW DS-8A5SH, XD12, max UDMA/100
ata1.00: configured for UDMA/133
ata2.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA WDC WD5000BEKT-7 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: CD-ROM PLDS DVD+-RW DS-8A5SH XD12 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 2-1: new high-speed USB device number 2 using ehci_hcd
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.2: new high-speed USB device number 3 using ehci_hcd
[drm] fb mappable at 0xC0142000
[drm] vram apper at 0xC0000000
[drm] size 4325376
[drm] fb depth is 24
[drm] pitch is 5632
fbcon: radeondrmfb (fb0) is primary device
Initializing USB Mass Storage driver...
scsi6 : usb-storage 1-1.2:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
Refined TSC clocksource calibration: 2526.986 MHz.
Switching to clocksource tsc
usb 1-1.6: new high-speed USB device number 4 using ehci_hcd
Console: switching to colour frame buffer device 170x48
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.15.0 20080528 for 0000:01:00.0 on minor 0
scsi 6:0:0:0: Direct-Access Ideos 0000 PQ: 0 ANSI: 2
scsi 6:0:0:1: CD-ROM Ideos 0000 PQ: 0 ANSI: 2
sd 6:0:0:0: Attached scsi generic sg2 type 0
sr1: scsi3-mmc drive: 0x/0x caddy
sr 6:0:0:1: Attached scsi CD-ROM sr1
sr 6:0:0:1: Attached scsi generic sg3 type 5
sd 6:0:0:0: [sdb] Attached SCSI removable disk
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Adding 11480060k swap on /dev/sda5. Priority:-1 extents:1 across:11480060k
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr
type=1400 audit(1338494329.228:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=719 comm="apparmor_parser"
type=1400 audit(1338494329.228:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=719 comm="apparmor_parser"
type=1400 audit(1338494329.228:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=719 comm="apparmor_parser"
type=1400 audit(1338494329.228:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=661 comm="apparmor_parser"
type=1400 audit(1338494329.228:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=661 comm="apparmor_parser"
type=1400 audit(1338494329.228:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=661 comm="apparmor_parser"
intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads
intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
lp: driver loaded but no devices found
input: Dell WMI hotkeys as /devices/virtual/input/input6
microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
mei: module is from the staging directory, the quality is unknown, you have been warned.
mei 0000:00:16.0: setting latency timer to 64
mei 0000:00:16.0: irq 48 for MSI/MSI-X
type=1400 audit(1338494330.728:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=788 comm="apparmor_parser"
type=1400 audit(1338494330.738:9): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=789 comm="apparmor_parser"
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
Linux media interface: v0.10
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
ip_tables: (C) 2000-2006 Netfilter Core Team
Linux video capture interface: v2.00
cfg80211: Calling CRDA to update world regulatory domain
uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_1.3M (0c45:6480)
input: Laptop_Integrated_Webcam_1.3M as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input8
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
ip6_tables: (C) 2000-2006 Netfilter Core Team
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
snd_hda_intel 0000:01:00.1: irq 50 for MSI/MSI-X
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
Copyright(c) 2003-2012 Intel Corporation
iwlwifi 0000:12:00.0: pci_resource_len = 0x00002000
iwlwifi 0000:12:00.0: pci_resource_base = ffffc900110f4000
iwlwifi 0000:12:00.0: HW Revision ID = 0x0
iwlwifi 0000:12:00.0: irq 51 for MSI/MSI-X
iwlwifi 0000:12:00.0: loaded firmware version 39.31.5.1 build 35138
iwlwifi 0000:12:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:12:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
iwlwifi 0000:12:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
iwlwifi 0000:12:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
iwlwifi 0000:12:00.0: CONFIG_IWLWIFI_P2P enabled
iwlwifi 0000:12:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
iwlwifi 0000:12:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:12:00.0: device EEPROM VER=0x15d, CALIB=0x6
iwlwifi 0000:12:00.0: Device SKU: 0x50
iwlwifi 0000:12:00.0: Valid Tx ant: 0x1, Valid Rx ant: 0x3
iwlwifi 0000:12:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
Registered led device: phy0-led
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
ppdev: user-space parallel port driver
type=1400 audit(1338494339.788:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1149 comm="apparmor_parser"
type=1400 audit(1338494339.788:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1149 comm="apparmor_parser"
r8169 0000:13:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
type=1400 audit(1338494344.578:12): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1367 comm="apparmor_parser"
type=1400 audit(1338494344.578:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1367 comm="apparmor_parser"
type=1400 audit(1338494344.578:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1367 comm="apparmor_parser"
type=1400 audit(1338494344.868:15): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1366 comm="apparmor_parser"
type=1400 audit(1338494345.058:16): apparmor="STATUS" operation="profile_load" name="/usr/bin/freshclam" pid=1370 comm="apparmor_parser"
type=1400 audit(1338494345.128:17): apparmor="STATUS" operation="profile_load" name="/usr/lib/libvirt/virt-aa-helper" pid=1372 comm="apparmor_parser"
type=1400 audit(1338494345.278:18): apparmor="STATUS" operation="profile_load" name="/usr/sbin/libvirtd" pid=1376 comm="apparmor_parser"
type=1400 audit(1338494345.428:19): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld" pid=1377 comm="apparmor_parser"
type=1400 audit(1338494345.518:20): apparmor="STATUS" operation="profile_load" name="/usr/sbin/named" pid=1378 comm="apparmor_parser"
type=1400 audit(1338494345.668:21): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1375 comm="apparmor_parser"
type=1400 audit(1338494345.668:22): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1375 comm="apparmor_parser"
type=1400 audit(1338494345.698:23): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=1379 comm="apparmor_parser"
type=1400 audit(1338494345.788:24): apparmor="STATUS" operation="profile_load" name="/usr/sbin/slapd" pid=1380 comm="apparmor_parser"
audit_printk_skb: 12 callbacks suppressed
type=1400 audit(1338494351.268:29): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=1518 comm="apparmor_parser"
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
Bridge firewalling registered
ADDRCONF(NETDEV_UP): virbr0: link is not ready
hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0
ADDRCONF(NETDEV_UP): tap0: link is not ready
iwlwifi 0000:12:00.0: RF_KILL bit toggled to enable radio.
usb 2-1.6: new full-speed USB device number 3 using ehci_hcd
hub 2-1.6:1.0: USB hub found
hub 2-1.6:1.0: 3 ports detected
usb 2-1.6.1: new full-speed USB device number 4 using ehci_hcd
usb 2-1.6.2: new full-speed USB device number 5 using ehci_hcd
iwlwifi 0000:12:00.0: RF_KILL bit toggled to disable radio.
usb 2-1.6: USB disconnect, device number 3
usb 2-1.6.1: USB disconnect, device number 4
usb 2-1.6.2: USB disconnect, device number 5
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
radeon 0000:01:00.0: evergreen_cs_track_validate_cb:439 cb[0] bo too small (layer size 147456, offset 0, max layer 1, bo size 143360, slice 575)
radeon 0000:01:00.0: evergreen_cs_track_validate_cb:443 problematic surf: (192 192) (0 4 1 0 0 0 0)
radeon 0000:01:00.0: evergreen_packet3_check:2055 invalid cmd stream 461
[drm:radeon_cs_ib_chunk] *ERROR* Invalid command stream !
radeon 0000:01:00.0: evergreen_cs_track_validate_cb:439 cb[0] bo too small (layer size 147456, offset 0, max layer 1, bo size 143360, slice 575)
radeon 0000:01:00.0: evergreen_cs_track_validate_cb:443 problematic surf: (192 192) (0 4 1 0 0 0 0)
radeon 0000:01:00.0: evergreen_packet3_check:2055 invalid cmd stream 461
[drm:radeon_cs_ib_chunk] *ERROR* Invalid command stream !
radeon 0000:01:00.0: evergreen_cs_track_validate_cb:439 cb[0] bo too small (layer size 798720, offset 0, max layer 1, bo size 794624, slice 3119)
radeon 0000:01:00.0: evergreen_cs_track_validate_cb:443 problematic surf: (384 520) (0 4 1 0 0 0 0)
radeon 0000:01:00.0: evergreen_packet3_check:2055 invalid cmd stream 461
[drm:radeon_cs_ib_chunk] *ERROR* Invalid command stream !
radeon 0000:01:00.0: evergreen_cs_track_validate_cb:439 cb[0] bo too small (layer size 458752, offset 0, max layer 1, bo size 446464, slice 1791)
radeon 0000:01:00.0: evergreen_cs_track_validate_cb:443 problematic surf: (512 224) (0 4 1 0 0 0 0)
radeon 0000:01:00.0: evergreen_packet3_check:2055 invalid cmd stream 7170
[drm:radeon_cs_ib_chunk] *ERROR* Invalid command stream !
radeon 0000:01:00.0: evergreen_cs_track_validate_cb:439 cb[0] bo too small (layer size 798720, offset 0, max layer 1, bo size 790528, slice 3119)
radeon 0000:01:00.0: evergreen_cs_track_validate_cb:443 problematic surf: (384 520) (0 4 1 0 0 0 0)
radeon 0000:01:00.0: evergreen_packet3_check:2055 invalid cmd stream 461
[drm:radeon_cs_ib_chunk] *ERROR* Invalid command stream !
May 31 23:03:13 phyllis kernel: Kernel logging (proc) stopped.
May 31 23:03:58 phyllis kernel: imklog 4.6.4, log source = /proc/kmsg started.
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.3.6 (marebri@phyllis) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #1 SMP Tue May 15 00:22:58 EAT 2012
Command line: BOOT_IMAGE=/boot/vmlinuz-3.3.6 root=UUID=89da4c87-2589-4741-9115-c34de11b3aa4 ro crashkernel=384M-2G:64M,2G-:128M quiet splash
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bf5a7000 (usable)
BIOS-e820: 00000000bf5a7000 - 00000000bf5ef000 (ACPI NVS)
BIOS-e820: 00000000bf5ef000 - 00000000bf5f9000 (ACPI data)
BIOS-e820: 00000000bf5f9000 - 00000000bf5fc000 (ACPI NVS)
BIOS-e820: 00000000bf5fc000 - 00000000bf620000 (reserved)
BIOS-e820: 00000000bf620000 - 00000000bf621000 (usable)
BIOS-e820: 00000000bf621000 - 00000000bf629000 (ACPI NVS)
BIOS-e820: 00000000bf629000 - 00000000bf62c000 (reserved)
BIOS-e820: 00000000bf62c000 - 00000000bf631000 (ACPI NVS)
BIOS-e820: 00000000bf631000 - 00000000bf651000 (reserved)
BIOS-e820: 00000000bf651000 - 00000000bf694000 (ACPI NVS)
BIOS-e820: 00000000bf694000 - 00000000bf800000 (usable)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
NX (Execute Disable) protection: active
DMI 2.6 present.
DMI: Dell Inc. Inspiron N5010/0YXXJJ, BIOS A10 11/17/2010
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x138000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F00000000 write-back
1 base 100000000 mask FC0000000 write-back
2 base 0C0000000 mask FC0000000 uncachable
3 base 138000000 mask FF8000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbf800 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000fcdb0] fcdb0
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff880000098000] 98000 size 20480
init_memory_mapping: 0000000000000000-00000000bf800000
0000000000 - 00bf800000 page 2M
kernel direct mapping tables up to bf800000 @ 1fffc000-20000000
init_memory_mapping: 0000000100000000-0000000138000000
0100000000 - 0138000000 page 2M
kernel direct mapping tables up to 138000000 @ bf7fa000-bf800000
RAMDISK: 2593c000 - 2ec96000
Reserving 128MB of memory at 768MB for crashkernel (System RAM: 4992MB)
ACPI: RSDP 00000000000f0410 00024 (v03 DELL )
ACPI: XSDT 00000000bf5ef080 00054 (v01 DELL WN09 01072009 AMI 00010013)
ACPI: FACP 00000000bf5f8a48 000F4 (v04 DELL WN09 01072009 AMI 00010013)
ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20120111/tbfadt-378)
ACPI Warning: 32/64X FACS address mismatch in FADT - 0xBF62CF40/0x00000000BF62CF80, using 32 (20120111/tbfadt-502)
ACPI: DSDT 00000000bf5ef168 098DF (v02 DELL WN09 00005010 INTL 20051117)
ACPI: FACS 00000000bf62cf40 00040
ACPI: APIC 00000000bf5f8b40 00072 (v01 DELL WN09 01072009 AMI 00010013)
ACPI: SSDT 00000000bf5f8bb8 0014E (v01 AMICPU PROC 00000001 MSFT 03000001)
ACPI: MCFG 00000000bf5f8d08 0003C (v01 DELL WN09 01072009 MSFT 00000097)
ACPI: HPET 00000000bf5f8d48 00038 (v01 DELL WN09 01072009 AMI. 00000003)
ACPI: OSFR 00000000bf5f8d80 0008C (v01 DELL M08 07DA0B11 ASL 00000061)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-0000000138000000
Initmem setup node 0 0000000000000000-0000000138000000
NODE_DATA [0000000137ffb000 - 0000000137ffffff]
[ffffea0000000000-ffffea0004dfffff] PMD -> [ffff880133800000-ffff8801375fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00138000
Movable zone start PFN for each node
Early memory PFN ranges
0: 0x00000010 -> 0x0000009d
0: 0x00000100 -> 0x000bf5a7
0: 0x000bf620 -> 0x000bf621
0: 0x000bf694 -> 0x000bf800
0: 0x00100000 -> 0x00138000
On node 0 totalpages: 1013409
DMA zone: 64 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3912 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 763732 pages, LIFO batch:31
Normal zone: 3584 pages used for memmap
Normal zone: 225792 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bf5a7000 - 00000000bf5ef000
PM: Registered nosave memory: 00000000bf5ef000 - 00000000bf5f9000
PM: Registered nosave memory: 00000000bf5f9000 - 00000000bf5fc000
PM: Registered nosave memory: 00000000bf5fc000 - 00000000bf620000
PM: Registered nosave memory: 00000000bf621000 - 00000000bf629000
PM: Registered nosave memory: 00000000bf629000 - 00000000bf62c000
PM: Registered nosave memory: 00000000bf62c000 - 00000000bf631000
PM: Registered nosave memory: 00000000bf631000 - 00000000bf651000
PM: Registered nosave memory: 00000000bf651000 - 00000000bf694000
PM: Registered nosave memory: 00000000bf800000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at bf800000 (gap: bf800000:20800000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff880137c00000 s82176 r8192 d24320 u524288
pcpu-alloc: s82176 r8192 d24320 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 993436
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.3.6 root=UUID=89da4c87-2589-4741-9115-c34de11b3aa4 ro crashkernel=384M-2G:64M,2G-:128M quiet splash
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3626184k/5111808k available (6222k kernel code, 1058172k absent, 427452k reserved, 6834k data, 892k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:4352 nr_irqs:712 16
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 16252928 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2526.812 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5053.62 BogoMIPS (lpj=25268120)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20120111
ftrace: allocating 23142 entries in 91 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i5 CPU M 460 @ 2.53GHz stepping 05
Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 98000
#2
smpboot cpu 2: start_ip = 98000
#3 Ok.
smpboot cpu 3: start_ip = 98000
Brought up 4 CPUs
Total of 4 processors activated (20214.49 BogoMIPS).
devtmpfs: initialized
PM: Registering ACPI NVS region at bf5a7000 (294912 bytes)
PM: Registering ACPI NVS region at bf5f9000 (12288 bytes)
PM: Registering ACPI NVS region at bf621000 (32768 bytes)
PM: Registering ACPI NVS region at bf62c000 (20480 bytes)
PM: Registering ACPI NVS region at bf651000 (274432 bytes)
print_constraints: dummy:
RTC time: 20:03:43, date: 05/31/12
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000bf621c18 003A4 (v01 AMI IST 00000001 MSFT 03000001)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 003A4 (v01 AMI IST 00000001 MSFT 03000001)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xffffffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
pci 0000:00:01.0: [8086:0045] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
pci 0000:00:16.0: reg 10: [mem 0xfbf09000-0xfbf0900f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
pci 0000:00:1a.0: reg 10: [mem 0xfbf08000-0xfbf083ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xfbf00000-0xfbf03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:3b46] type 1 class 0x000604
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:3b4a] type 1 class 0x000604
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
pci 0000:00:1d.0: reg 10: [mem 0xfbf07000-0xfbf073ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
pci 0000:00:1f.0: [8086:3b0b] type 0 class 0x000601
pci 0000:00:1f.2: [8086:3b2f] type 0 class 0x000106
pci 0000:00:1f.2: reg 10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 24: [mem 0xfbf06000-0xfbf067ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0xfbf05000-0xfbf050ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
pci 0000:00:1f.6: reg 10: [mem 0xfbf04000-0xfbf04fff 64bit]
pci 0000:01:00.0: [1002:68c1] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xfbe20000-0xfbe3ffff 64bit]
pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 30: [mem 0xfbe00000-0xfbe1ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa60] type 0 class 0x000403
pci 0000:01:00.1: reg 10: [mem 0xfbe40000-0xfbe43fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 11-11]
pci 0000:12:00.0: [8086:0083] type 0 class 0x000280
pci 0000:12:00.0: reg 10: [mem 0xfbd00000-0xfbd01fff 64bit]
pci 0000:12:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 12-12]
pci 0000:00:1c.1: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:13:00.0: [10ec:8136] type 0 class 0x000200
pci 0000:13:00.0: reg 10: [io 0xd000-0xd0ff]
pci 0000:13:00.0: reg 18: [mem 0xd0c10000-0xd0c10fff 64bit pref]
pci 0000:13:00.0: reg 20: [mem 0xd0c00000-0xd0c0ffff 64bit pref]
pci 0000:13:00.0: reg 30: [mem 0xfb300000-0xfb31ffff pref]
pci 0000:13:00.0: supports D1 D2
pci 0000:13:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 13-13]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xfb300000-0xfbcfffff]
pci 0000:00:1c.2: bridge window [mem 0xd0c00000-0xd15fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 15-15]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xfa900000-0xfb2fffff]
pci 0000:00:1c.4: bridge window [mem 0xd0100000-0xd0afffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 20-20] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x19) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
wmi: Mapper loaded
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus ff
PCI: root bus ff: using default resources
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600
pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009d400 - 000000000009ffff
reserve RAM buffer: 00000000bf5a7000 - 00000000bfffffff
reserve RAM buffer: 00000000bf621000 - 00000000bfffffff
reserve RAM buffer: 00000000bf800000 - 00000000bfffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x00000000 window]
pnp 00:00: [mem 0xc0000000-0xffffffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfed14000-0xfed19fff]
pnp 00:01: [mem 0xe0000000-0xefffffff]
pnp 00:01: [mem 0xfed90000-0xfed93fff]
pnp 00:01: [mem 0xfed20000-0xfed3ffff]
pnp 00:01: [mem 0xfee00000-0xfee0ffff]
system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0081-0x0083]
pnp 00:02: [io 0x0087]
pnp 00:02: [io 0x0089-0x008b]
pnp 00:02: [io 0x008f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x0070-0x0071]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io 0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [io 0x00f0-0x00ff]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [io 0x0010-0x001f]
pnp 00:06: [io 0x0022-0x003f]
pnp 00:06: [io 0x0044-0x005f]
pnp 00:06: [io 0x0068-0x006f]
pnp 00:06: [io 0x0072-0x007f]
pnp 00:06: [io 0x0080]
pnp 00:06: [io 0x0084-0x0086]
pnp 00:06: [io 0x0088]
pnp 00:06: [io 0x008c-0x008e]
pnp 00:06: [io 0x0090-0x009f]
pnp 00:06: [io 0x00a2-0x00bf]
pnp 00:06: [io 0x00e0-0x00ef]
pnp 00:06: [io 0x04d0-0x04d1]
pnp 00:06: [mem 0xfe800000-0xfe8001ff]
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: [mem 0xfe800000-0xfe8001ff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [irq 12]
pnp 00:07: Plug and Play ACPI device, IDs DLL0447 SYN0600 SYN0002 PNP0f13 (active)
pnp 00:08: [io 0x0060]
pnp 00:08: [io 0x0064]
pnp 00:08: [io 0x0062]
pnp 00:08: [io 0x0066]
pnp 00:08: [irq 1]
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:09: [io 0x0400-0x047f]
pnp 00:09: [io 0x1180-0x119f]
pnp 00:09: [io 0x0500-0x057f]
pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
pnp 00:09: [mem 0xfec00000-0xfecfffff]
pnp 00:09: [mem 0xfed08000-0xfed08fff]
pnp 00:09: [mem 0xff000000-0xffffffff]
system 00:09: [io 0x0400-0x047f] has been reserved
system 00:09: [io 0x1180-0x119f] has been reserved
system 00:09: [io 0x0500-0x057f] has been reserved
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:09: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:09: [mem 0xff000000-0xffffffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0a: [mem 0xfed00000-0xfed003ff]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:1c.1: BAR 15: assigned [mem 0xd1600000-0xd17fffff 64bit pref]
pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:1c.0: BAR 14: assigned [mem 0xd1800000-0xd19fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xd1a00000-0xd1bfffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 11-11]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xd1800000-0xd19fffff]
pci 0000:00:1c.0: bridge window [mem 0xd1a00000-0xd1bfffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 12-12]
pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.1: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.1: bridge window [mem 0xd1600000-0xd17fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 13-13]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xfb300000-0xfbcfffff]
pci 0000:00:1c.2: bridge window [mem 0xd0c00000-0xd15fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 15-15]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xfa900000-0xfb2fffff]
pci 0000:00:1c.4: bridge window [mem 0xd0100000-0xd0afffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 20-20]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:11: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:11: resource 1 [mem 0xd1800000-0xd19fffff]
pci_bus 0000:11: resource 2 [mem 0xd1a00000-0xd1bfffff 64bit pref]
pci_bus 0000:12: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:12: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:12: resource 2 [mem 0xd1600000-0xd17fffff 64bit pref]
pci_bus 0000:13: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:13: resource 1 [mem 0xfb300000-0xfbcfffff]
pci_bus 0000:13: resource 2 [mem 0xd0c00000-0xd15fffff 64bit pref]
pci_bus 0000:15: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:15: resource 1 [mem 0xfa900000-0xfb2fffff]
pci_bus 0000:15: resource 2 [mem 0xd0100000-0xd0afffff 64bit pref]
pci_bus 0000:20: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:20: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:20: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:20: resource 7 [mem 0xc0000000-0xffffffff]
pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 150888k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800bb5a7000 - ffff8800bf5a7000
software IO TLB at phys 0xbb5a7000 - 0xbf5a7000
audit: initializing netlink socket (disabled)
type=2000 audit(1338494625.370:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.18)
msgmni has been set to 7377
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: Using ACPI for slot detection.
pciehp 0000:00:1c.4:pcie04: HPC vendor_id 8086 device_id 3b4a ss_vid 1028 ss_did 447
pciehp 0000:00:1c.4:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x25
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [AC] (on-line)
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID0]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM] (54 C)
GHES: HEST is not enabled!
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfbf08000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbf07000
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery present)
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.3.0 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 12:957:94
rtc_cmos 00:03: setting system clock to 2012-05-31 20:03:46 UTC (1338494626)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 892k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1952k freed
Freeing unused kernel memory: 1412k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
ACPI Warning: _BQC returned an invalid level (20120111/video-472)
acpi device:03: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input5
ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:13:00.0: irq 45 for MSI/MSI-X
r8169 0000:13:00.0: eth0: RTL8102e at 0xffffc9000067e000, f0:4d:a2:bc:d8:d6, XID 04e00000 IRQ 45
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x13 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems sxs apst
ahci 0000:00:1f.2: setting latency timer to 64
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (REDWOOD 0x1002:0x68C1 0x1028:0x0447).
[drm] register mmio base: 0xFBE20000
[drm] register mmio size: 131072
ATOM BIOS: Dell
radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 1890664 kiB.
[TTM] Initializing pool allocator.
[TTM] Initializing DMA pool allocator.
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: irq 47 for MSI/MSI-X
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] radeon: ib pool ready.
[drm] Loading REDWOOD Microcode
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
[drm] fence driver on ring 0 use gpu addr 0x40000c00 and cpu addr 0xffff88010f044c00
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06100 irq 46
ata2: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06180 irq 46
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06300 irq 46
ata6: DUMMY
[drm] ring test on 0 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] Enabling audio support
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] LVDS
[drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[drm] Encoders:
[drm] LCD1: INTERNAL_UNIPHY
[drm] Connector 1:
[drm] HDMI-A
[drm] HPD1
[drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY1
[drm] Connector 2:
[drm] VGA
[drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Internal thermal controller with fan control
[drm] radeon: power management initialized
usb 1-1: new high-speed USB device number 2 using ehci_hcd
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: WDC WD5000BEKT-75KA9T0, 01.01A01, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: ATAPI: PLDS DVD+/-RW DS-8A5SH, XD12, max UDMA/100
ata1.00: configured for UDMA/133
ata2.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA WDC WD5000BEKT-7 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: CD-ROM PLDS DVD+-RW DS-8A5SH XD12 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
usb 2-1: new high-speed USB device number 2 using ehci_hcd
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.2: new high-speed USB device number 3 using ehci_hcd
Refined TSC clocksource calibration: 2526.985 MHz.
Switching to clocksource tsc
Initializing USB Mass Storage driver...
scsi6 : usb-storage 1-1.2:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 1-1.6: new high-speed USB device number 4 using ehci_hcd
scsi 6:0:0:0: Direct-Access Ideos 0000 PQ: 0 ANSI: 2
scsi 6:0:0:1: CD-ROM Ideos 0000 PQ: 0 ANSI: 2
sd 6:0:0:0: Attached scsi generic sg2 type 0
sr1: scsi3-mmc drive: 0x/0x caddy
sr 6:0:0:1: Attached scsi CD-ROM sr1
sr 6:0:0:1: Attached scsi generic sg3 type 5
sd 6:0:0:0: [sdb] Attached SCSI removable disk
[drm] fb mappable at 0xC0142000
[drm] vram apper at 0xC0000000
[drm] size 4325376
[drm] fb depth is 24
[drm] pitch is 5632
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.13.0 20080528 for 0000:01:00.0 on minor 0
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Adding 11480060k swap on /dev/sda5. Priority:-1 extents:1 across:11480060k
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr
type=1400 audit(1338494642.222:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=692 comm="apparmor_parser"
type=1400 audit(1338494642.222:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=692 comm="apparmor_parser"
type=1400 audit(1338494642.222:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=692 comm="apparmor_parser"
type=1400 audit(1338494642.242:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=681 comm="apparmor_parser"
type=1400 audit(1338494642.242:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=681 comm="apparmor_parser"
type=1400 audit(1338494642.242:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=681 comm="apparmor_parser"
lp: driver loaded but no devices found
cfg80211: Calling CRDA to update world regulatory domain
type=1400 audit(1338494642.862:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=861 comm="apparmor_parser"
type=1400 audit(1338494642.862:9): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=862 comm="apparmor_parser"
type=1400 audit(1338494643.132:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=889 comm="apparmor_parser"
type=1400 audit(1338494643.132:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=889 comm="apparmor_parser"
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
ip_tables: (C) 2000-2006 Netfilter Core Team
intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
input: Dell WMI hotkeys as /devices/virtual/input/input6
mei: module is from the staging directory, the quality is unknown, you have been warned.
mei 0000:00:16.0: setting latency timer to 64
mei 0000:00:16.0: irq 48 for MSI/MSI-X
Linux media interface: v0.10
Linux video capture interface: v2.00
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_1.3M (0c45:6480)
input: Laptop_Integrated_Webcam_1.3M as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input7
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
Copyright(c) 2003-2011 Intel Corporation
iwlwifi 0000:12:00.0: pci_resource_len = 0x00002000
iwlwifi 0000:12:00.0: pci_resource_base = ffffc900110cc000
iwlwifi 0000:12:00.0: HW Revision ID = 0x0
iwlwifi 0000:12:00.0: irq 49 for MSI/MSI-X
iwlwifi 0000:12:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:12:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
iwlwifi 0000:12:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
iwlwifi 0000:12:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
iwlwifi 0000:12:00.0: CONFIG_IWLWIFI_P2P enabled
iwlwifi 0000:12:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
iwlwifi 0000:12:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:12:00.0: device EEPROM VER=0x15d, CALIB=0x6
iwlwifi 0000:12:00.0: Device SKU: 0x50
iwlwifi 0000:12:00.0: Valid Tx ant: 0x1, Valid Rx ant: 0x3
iwlwifi 0000:12:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
iwlwifi 0000:12:00.0: RF_KILL bit toggled to disable radio.
ip6_tables: (C) 2000-2006 Netfilter Core Team
iwlwifi 0000:12:00.0: loaded firmware version 39.31.5.1 build 35138
Registered led device: phy0-led
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
r8169 0000:13:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
snd_hda_intel 0000:01:00.1: irq 51 for MSI/MSI-X
HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
ppdev: user-space parallel port driver
audit_printk_skb: 6 callbacks suppressed
type=1400 audit(1338494654.062:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1272 comm="apparmor_parser"
type=1400 audit(1338494654.062:15): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1272 comm="apparmor_parser"
type=1400 audit(1338494654.662:16): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1317 comm="apparmor_parser"
type=1400 audit(1338494654.672:17): apparmor="STATUS" operation="profile_load" name="/usr/bin/freshclam" pid=1321 comm="apparmor_parser"
type=1400 audit(1338494654.922:18): apparmor="STATUS" operation="profile_load" name="/usr/lib/libvirt/virt-aa-helper" pid=1323 comm="apparmor_parser"
type=1400 audit(1338494654.932:19): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1318 comm="apparmor_parser"
type=1400 audit(1338494654.932:20): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1318 comm="apparmor_parser"
type=1400 audit(1338494654.932:21): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1318 comm="apparmor_parser"
type=1400 audit(1338494655.072:22): apparmor="STATUS" operation="profile_load" name="/usr/sbin/libvirtd" pid=1325 comm="apparmor_parser"
type=1400 audit(1338494655.312:23): apparmor="STATUS" operation="profile_load" name="/usr/sbin/named" pid=1327 comm="apparmor_parser"
audit_printk_skb: 18 callbacks suppressed
type=1400 audit(1338494660.052:30): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1319 comm="apparmor_parser"
type=1400 audit(1338494660.052:31): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1319 comm="apparmor_parser"
type=1400 audit(1338494660.052:32): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=1319 comm="apparmor_parser"
type=1400 audit(1338494661.292:33): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=1449 comm="apparmor_parser"
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
Bridge firewalling registered
ADDRCONF(NETDEV_UP): virbr0: link is not ready
hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0
vboxdrv: Found 4 processor cores.
VBoxDrv: dbg - g_abExecMemory=ffffffffa0506700
vboxdrv: fAsync=0 offMin=0x243 offMax=0x1e04
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.1.14 (interface 0x00190000).
vboxpci: IOMMU not found (not registered)
ADDRCONF(NETDEV_UP): tap0: link is not ready
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
usb 1-1.2: USB disconnect, device number 3
usb 1-1.2: new high-speed USB device number 5 using ehci_hcd
scsi7 : usb-storage 1-1.2:1.0
scsi 7:0:0:0: Direct-Access Ideos 0000 PQ: 0 ANSI: 2
scsi 7:0:0:1: CD-ROM Ideos 0000 PQ: 0 ANSI: 2
sd 7:0:0:0: Attached scsi generic sg2 type 0
sr1: scsi3-mmc drive: 0x/0x caddy
sr 7:0:0:1: Attached scsi CD-ROM sr1
sr 7:0:0:1: Attached scsi generic sg3 type 5
sd 7:0:0:0: [sdb] Attached SCSI removable disk
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.07 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
pciehp 0000:00:1c.4:pcie04: pciehp_suspend ENTRY
ACPI handle has no context!
ACPI handle has no context!
[drm] Disabling audio support
PM: suspend of devices complete after 709.681 msecs
PM: suspend devices took 0.710 seconds
pcieport 0000:00:1c.2: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
PM: late suspend of devices complete after 100.089 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
CPU 1 is now offline
CPU 2 is now offline
CPU 3 is now offline
Extended CMOS year: 2000
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Extended CMOS year: 2000
Enabling non-boot CPUs ...
Booting Node 0 Processor 1 APIC 0x4
smpboot cpu 1: start_ip = 98000
Calibrating delay loop (skipped) already calibrated this CPU
CPU1 is up
Booting Node 0 Processor 2 APIC 0x1
smpboot cpu 2: start_ip = 98000
Calibrating delay loop (skipped) already calibrated this CPU
CPU2 is up
Booting Node 0 Processor 3 APIC 0x5
smpboot cpu 3: start_ip = 98000
Calibrating delay loop (skipped) already calibrated this CPU
CPU3 is up
ACPI: Waking up from system sleep state S3
ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
PM: early resume of devices complete after 6.871 msecs
ehci_hcd 0000:00:1a.0: setting latency timer to 64
pciehp 0000:00:1c.4:pcie04: pciehp_resume ENTRY
ehci_hcd 0000:00:1d.0: setting latency timer to 64
mei 0000:00:16.0: irq 48 for MSI/MSI-X
pci 0000:00:1e.0: setting latency timer to 64
snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
ahci 0000:00:1f.2: setting latency timer to 64
snd_hda_intel 0000:01:00.1: irq 51 for MSI/MSI-X
pcieport 0000:00:1c.2: wake-up capability disabled by ACPI
iwlwifi 0000:12:00.0: RF_KILL bit toggled to disable radio.
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
[drm] fence driver on ring 0 use gpu addr 0x40000c00 and cpu addr 0xffff88010f044c00
Extended CMOS year: 2000
[drm] ring test on 0 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] Enabling audio support
usb 1-1.6: reset high-speed USB device number 4 using ehci_hcd
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata5: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 3751.719 msecs
PM: resume devices took 3.750 seconds
PM: Finishing wakeup.
Restarting tasks ...
usb 1-1.2: USB disconnect, device number 5
done.
video LNXVIDEO:00: Restoring backlight state
r8169 0000:13:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr,commit=600
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr,commit=600
iwlwifi 0000:12:00.0: RF_KILL bit toggled to enable radio.
keyboard: can't emulate rawmode for keycode 240
keyboard: can't emulate rawmode for keycode 240
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
usb 2-1.6: new full-speed USB device number 3 using ehci_hcd
hub 2-1.6:1.0: USB hub found
hub 2-1.6:1.0: 3 ports detected
usb 2-1.6.1: new full-speed USB device number 4 using ehci_hcd
usb 2-1.6.2: new full-speed USB device number 5 using ehci_hcd
input: HID 413c:8161 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.1/2-1.6.1:1.0/input/input12
generic-usb 0003:413C:8161.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 413c:8161] on usb-0000:00:1d.0-1.6.1/input0
input: HID 413c:8162 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.2/2-1.6.2:1.0/input/input13
generic-usb 0003:413C:8162.0002: input,hidraw1: USB HID v1.11 Mouse [HID 413c:8162] on usb-0000:00:1d.0-1.6.2/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
iwlwifi 0000:12:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:12:00.0: L1 Disabled; Enabling L0S
ADDRCONF(NETDEV_UP): wlan0: link is not ready
usb 2-1.6.3: new full-speed USB device number 6 using ehci_hcd
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
wlan0: authenticate with 00:15:af:66:15:83 (try 1)
wlan0: authenticated
wlan0: associate with 00:15:af:66:15:83 (try 1)
wlan0: RX AssocResp from 00:15:af:66:15:83 (capab=0x11 status=0 aid=3)
wlan0: associated
wlan0: moving STA 00:15:af:66:15:83 to state 1
wlan0: moving STA 00:15:af:66:15:83 to state 2
wlan0: moving STA 00:15:af:66:15:83 to state 3
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
IPv6 over IPv4 tunneling driver
wlan0: deauthenticating from 00:15:af:66:15:83 by local choice (reason=3)
wlan0: moving STA 00:15:af:66:15:83 to state 2
wlan0: moving STA 00:15:af:66:15:83 to state 1
wlan0: moving STA 00:15:af:66:15:83 to state 0
cfg80211: All devices are disconnected, going to restore regulatory settings
cfg80211: Restoring regulatory settings
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
pciehp 0000:00:1c.4:pcie04: pciehp_suspend ENTRY
ACPI handle has no context!
ACPI handle has no context!
[drm] Disabling audio support
PM: suspend of devices complete after 619.795 msecs
PM: suspend devices took 0.620 seconds
pcieport 0000:00:1c.2: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
PM: late suspend of devices complete after 100.001 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
CPU 1 is now offline
CPU 2 is now offline
CPU 3 is now offline
Extended CMOS year: 2000
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Extended CMOS year: 2000
Enabling non-boot CPUs ...
Booting Node 0 Processor 1 APIC 0x4
smpboot cpu 1: start_ip = 98000
Calibrating delay loop (skipped) already calibrated this CPU
CPU1 is up
Booting Node 0 Processor 2 APIC 0x1
smpboot cpu 2: start_ip = 98000
Calibrating delay loop (skipped) already calibrated this CPU
CPU2 is up
Booting Node 0 Processor 3 APIC 0x5
smpboot cpu 3: start_ip = 98000
Calibrating delay loop (skipped) already calibrated this CPU
CPU3 is up
ACPI: Waking up from system sleep state S3
ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
PM: early resume of devices complete after 6.764 msecs
ehci_hcd 0000:00:1a.0: setting latency timer to 64
pciehp 0000:00:1c.4:pcie04: pciehp_resume ENTRY
mei 0000:00:16.0: irq 48 for MSI/MSI-X
ehci_hcd 0000:00:1d.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
ahci 0000:00:1f.2: setting latency timer to 64
snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
iwlwifi 0000:12:00.0: RF_KILL bit toggled to enable radio.
pcieport 0000:00:1c.2: wake-up capability disabled by ACPI
snd_hda_intel 0000:01:00.1: irq 51 for MSI/MSI-X
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
[drm] fence driver on ring 0 use gpu addr 0x40000c00 and cpu addr 0xffff88010f044c00
[drm] ring test on 0 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] Enabling audio support
Extended CMOS year: 2000
usb 1-1.6: reset high-speed USB device number 4 using ehci_hcd
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata5: SATA link down (SStatus 0 SControl 300)
usb 2-1.6: reset full-speed USB device number 3 using ehci_hcd
usb 2-1.6.2: reset full-speed USB device number 5 using ehci_hcd
usb 2-1.6.1: reset full-speed USB device number 4 using ehci_hcd
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 3293.753 msecs
PM: resume devices took 3.300 seconds
PM: Finishing wakeup.
Restarting tasks ... done.
usb 2-1.6.3: USB disconnect, device number 6
video LNXVIDEO:00: Restoring backlight state
usb 2-1.6.3: new full-speed USB device number 7 using ehci_hcd
iwlwifi 0000:12:00.0: L1 Disabled; Enabling L0S
ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:13:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
wlan0: authenticate with 00:15:af:66:15:83 (try 1)
wlan0: authenticated
wlan0: associate with 00:15:af:66:15:83 (try 1)
wlan0: RX AssocResp from 00:15:af:66:15:83 (capab=0x11 status=0 aid=2)
wlan0: associated
wlan0: moving STA 00:15:af:66:15:83 to state 1
wlan0: moving STA 00:15:af:66:15:83 to state 2
wlan0: moving STA 00:15:af:66:15:83 to state 3
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr,commit=600
wlan0: no IPv6 routers present
wlan0: deauthenticating from 00:15:af:66:15:83 by local choice (reason=3)
wlan0: moving STA 00:15:af:66:15:83 to state 2
wlan0: moving STA 00:15:af:66:15:83 to state 1
wlan0: moving STA 00:15:af:66:15:83 to state 0
cfg80211: All devices are disconnected, going to restore regulatory settings
cfg80211: Restoring regulatory settings
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
ACPI handle has no context!
pciehp 0000:00:1c.4:pcie04: pciehp_suspend ENTRY
ACPI handle has no context!
[drm] Disabling audio support
PM: suspend of devices complete after 619.786 msecs
PM: suspend devices took 0.620 seconds
pcieport 0000:00:1c.2: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
PM: late suspend of devices complete after 99.905 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
CPU 1 is now offline
CPU 2 is now offline
CPU 3 is now offline
Extended CMOS year: 2000
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Extended CMOS year: 2000
Enabling non-boot CPUs ...
Booting Node 0 Processor 1 APIC 0x4
smpboot cpu 1: start_ip = 98000
Calibrating delay loop (skipped) already calibrated this CPU
CPU1 is up
Booting Node 0 Processor 2 APIC 0x1
smpboot cpu 2: start_ip = 98000
Calibrating delay loop (skipped) already calibrated this CPU
CPU2 is up
Booting Node 0 Processor 3 APIC 0x5
smpboot cpu 3: start_ip = 98000
Calibrating delay loop (skipped) already calibrated this CPU
CPU3 is up
ACPI: Waking up from system sleep state S3
ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
PM: early resume of devices complete after 6.881 msecs
mei 0000:00:16.0: irq 48 for MSI/MSI-X
ehci_hcd 0000:00:1a.0: setting latency timer to 64
snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
pciehp 0000:00:1c.4:pcie04: pciehp_resume ENTRY
ehci_hcd 0000:00:1d.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
ahci 0000:00:1f.2: setting latency timer to 64
snd_hda_intel 0000:01:00.1: irq 51 for MSI/MSI-X
iwlwifi 0000:12:00.0: RF_KILL bit toggled to enable radio.
pcieport 0000:00:1c.2: wake-up capability disabled by ACPI
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
[drm] fence driver on ring 0 use gpu addr 0x40000c00 and cpu addr 0xffff88010f044c00
[drm] ring test on 0 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] Enabling audio support
Extended CMOS year: 2000
usb 2-1.6: reset full-speed USB device number 3 using ehci_hcd
ata5: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
usb 1-1.6: reset high-speed USB device number 4 using ehci_hcd
usb 2-1.6.1: reset full-speed USB device number 4 using ehci_hcd
usb 2-1.6.2: reset full-speed USB device number 5 using ehci_hcd
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 3305.063 msecs
PM: resume devices took 3.310 seconds
PM: Finishing wakeup.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
usb 2-1.2: new high-speed USB device number 8 using ehci_hcd
scsi8 : usb-storage 2-1.2:1.0
usb 2-1.6.3: USB disconnect, device number 7
usb 2-1.6.3: new full-speed USB device number 9 using ehci_hcd
iwlwifi 0000:12:00.0: L1 Disabled; Enabling L0S
ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:13:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
scsi 8:0:0:0: Direct-Access Ideos 0000 PQ: 0 ANSI: 2
scsi 8:0:0:1: CD-ROM Ideos 0000 PQ: 0 ANSI: 2
sd 8:0:0:0: Attached scsi generic sg2 type 0
sr1: scsi3-mmc drive: 0x/0x caddy
sr 8:0:0:1: Attached scsi CD-ROM sr1
sr 8:0:0:1: Attached scsi generic sg3 type 5
sd 8:0:0:0: [sdb] Attached SCSI removable disk
wlan0: authenticate with 00:15:af:66:15:83 (try 1)
wlan0: authenticated
wlan0: associate with 00:15:af:66:15:83 (try 1)
wlan0: RX AssocResp from 00:15:af:66:15:83 (capab=0x11 status=0 aid=2)
wlan0: associated
wlan0: moving STA 00:15:af:66:15:83 to state 1
wlan0: moving STA 00:15:af:66:15:83 to state 2
wlan0: moving STA 00:15:af:66:15:83 to state 3
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr,commit=600
wlan0: no IPv6 routers present
[Firmware Bug]: battery: (dis)charge rate invalid.
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
usb 2-1.2: USB disconnect, device number 8
wlan0: deauthenticating from 00:15:af:66:15:83 by local choice (reason=3)
wlan0: moving STA 00:15:af:66:15:83 to state 2
wlan0: moving STA 00:15:af:66:15:83 to state 1
wlan0: moving STA 00:15:af:66:15:83 to state 0
cfg80211: All devices are disconnected, going to restore regulatory settings
cfg80211: Restoring regulatory settings
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.23 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
ACPI handle has no context!
pciehp 0000:00:1c.4:pcie04: pciehp_suspend ENTRY
ACPI handle has no context!
[drm] Disabling audio support
PM: suspend of devices complete after 679.858 msecs
PM: suspend devices took 0.680 seconds
pcieport 0000:00:1c.2: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
PM: late suspend of devices complete after 99.869 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
CPU 1 is now offline
CPU 2 is now offline
Broke affinity for irq 47
CPU 3 is now offline
Extended CMOS year: 2000
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Extended CMOS year: 2000
Enabling non-boot CPUs ...
Booting Node 0 Processor 1 APIC 0x4
smpboot cpu 1: start_ip = 98000
Calibrating delay loop (skipped) already calibrated this CPU
CPU1 is up
Booting Node 0 Processor 2 APIC 0x1
smpboot cpu 2: start_ip = 98000
Calibrating delay loop (skipped) already calibrated this CPU
CPU2 is up
Booting Node 0 Processor 3 APIC 0x5
smpboot cpu 3: start_ip = 98000
Calibrating delay loop (skipped) already calibrated this CPU
CPU3 is up
ACPI: Waking up from system sleep state S3
ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
PM: early resume of devices complete after 6.709 msecs
mei 0000:00:16.0: irq 48 for MSI/MSI-X
ehci_hcd 0000:00:1a.0: setting latency timer to 64
pciehp 0000:00:1c.4:pcie04: pciehp_resume ENTRY
ehci_hcd 0000:00:1d.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
ahci 0000:00:1f.2: setting latency timer to 64
snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
pcieport 0000:00:1c.2: wake-up capability disabled by ACPI
iwlwifi 0000:12:00.0: RF_KILL bit toggled to enable radio.
snd_hda_intel 0000:01:00.1: irq 51 for MSI/MSI-X
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
[drm] fence driver on ring 0 use gpu addr 0x40000c00 and cpu addr 0xffff88010f044c00
[drm] ring test on 0 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] Enabling audio support
usb 1-1.6: reset high-speed USB device number 4 using ehci_hcd
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata5: SATA link down (SStatus 0 SControl 300)
usb 2-1.6: reset full-speed USB device number 3 using ehci_hcd
usb 2-1.6.1: reset full-speed USB device number 4 using ehci_hcd
usb 2-1.6.2: reset full-speed USB device number 5 using ehci_hcd
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 3416.362 msecs
PM: resume devices took 3.420 seconds
PM: Finishing wakeup.
Restarting tasks ... done.
usb 2-1.6.3: USB disconnect, device number 9
video LNXVIDEO:00: Restoring backlight state
usb 2-1.6.3: new full-speed USB device number 10 using ehci_hcd
iwlwifi 0000:12:00.0: L1 Disabled; Enabling L0S
ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:13:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
wlan0: authenticate with 00:15:af:66:15:83 (try 1)
wlan0: authenticated
wlan0: associate with 00:15:af:66:15:83 (try 1)
wlan0: RX AssocResp from 00:15:af:66:15:83 (capab=0x11 status=0 aid=2)
wlan0: associated
wlan0: moving STA 00:15:af:66:15:83 to state 1
wlan0: moving STA 00:15:af:66:15:83 to state 2
wlan0: moving STA 00:15:af:66:15:83 to state 3
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Regression] [Radeon] Stream command failures and render problems in Evergreen (Radeon HD 5600) in kernel 3.4
2012-06-03 17:26 [Regression] [Radeon] Stream command failures and render problems in Evergreen (Radeon HD 5600) in kernel 3.4 Brian Gitonga Marete
@ 2012-06-03 17:34 ` Brian Gitonga Marete
2012-06-06 22:59 ` Brian Gitonga Marete
1 sibling, 0 replies; 30+ messages in thread
From: Brian Gitonga Marete @ 2012-06-03 17:34 UTC (permalink / raw)
To: LKML; +Cc: David Airlie, Alex Deucher
On Sun, Jun 3, 2012 at 8:26 PM, Brian Gitonga Marete <marete@toshnix.com> wrote:
> Hello,
>
> 3.4 breaks rendering on my Radeon evergreen card. Immediately after
> logging in into the desktop, I get the following errors in the kernel
> log:
I should add that I have nothing in my xorg.conf. In fact, it doesn't
exist on my system.
Thanks!
--
Brian Gitonga Marete
Toshnix Systems - http://toshnix.com
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Regression] [Radeon] Stream command failures and render problems in Evergreen (Radeon HD 5600) in kernel 3.4
2012-06-03 17:26 [Regression] [Radeon] Stream command failures and render problems in Evergreen (Radeon HD 5600) in kernel 3.4 Brian Gitonga Marete
2012-06-03 17:34 ` Brian Gitonga Marete
@ 2012-06-06 22:59 ` Brian Gitonga Marete
2012-06-06 23:01 ` Brian Gitonga Marete
1 sibling, 1 reply; 30+ messages in thread
From: Brian Gitonga Marete @ 2012-06-06 22:59 UTC (permalink / raw)
To: LKML; +Cc: David Airlie, Alex Deucher, Jerome Glisse
On Sun, Jun 3, 2012 at 8:26 PM, Brian Gitonga Marete <marete@toshnix.com> wrote:
> Hello,
>
> 3.4 breaks rendering on my Radeon evergreen card. Immediately after
> logging in into the desktop, I get the following errors in the kernel
> log:
>
> radeon 0000:01:00.0: evergreen_cs_track_validate_cb:439 cb[0] bo too
> small (layer size 147456, offset 0, max layer 1, bo size 143360, slice
> 575)
> radeon 0000:01:00.0: evergreen_cs_track_validate_cb:443 problematic
> surf: (192 192) (0 4 1 0 0 0 0)
> radeon 0000:01:00.0: evergreen_packet3_check:2055 invalid cmd stream 461
> [drm:radeon_cs_ib_chunk] *ERROR* Invalid command stream !
> radeon 0000:01:00.0: evergreen_cs_track_validate_cb:439 cb[0] bo too
> small (layer size 147456, offset 0, max layer 1, bo size 143360, slice
> 575)
> radeon 0000:01:00.0: evergreen_cs_track_validate_cb:443 problematic
> surf: (192 192) (0 4 1 0 0 0 0)
> radeon 0000:01:00.0: evergreen_packet3_check:2055 invalid cmd stream 461
> [drm:radeon_cs_ib_chunk] *ERROR* Invalid command stream !
> radeon 0000:01:00.0: evergreen_cs_track_validate_cb:439 cb[0] bo too
> small (layer size 798720, offset 0, max layer 1, bo size 794624, slice
> 3119)
> radeon 0000:01:00.0: evergreen_cs_track_validate_cb:443 problematic
> surf: (384 520) (0 4 1 0 0 0 0)
> radeon 0000:01:00.0: evergreen_packet3_check:2055 invalid cmd stream 461
> [drm:radeon_cs_ib_chunk] *ERROR* Invalid command stream !
> radeon 0000:01:00.0: evergreen_cs_track_validate_cb:439 cb[0] bo too
> small (layer size 458752, offset 0, max layer 1, bo size 446464, slice
> 1791)
> radeon 0000:01:00.0: evergreen_cs_track_validate_cb:443 problematic
> surf: (512 224) (0 4 1 0 0 0 0)
> radeon 0000:01:00.0: evergreen_packet3_check:2055 invalid cmd stream 7170
> [drm:radeon_cs_ib_chunk] *ERROR* Invalid command stream !
> radeon 0000:01:00.0: evergreen_cs_track_validate_cb:439 cb[0] bo too
> small (layer size 798720, offset 0, max layer 1, bo size 790528, slice
> 3119)
> radeon 0000:01:00.0: evergreen_cs_track_validate_cb:443 problematic
> surf: (384 520) (0 4 1 0 0 0 0)
> radeon 0000:01:00.0: evergreen_packet3_check:2055 invalid cmd stream 461
> [drm:radeon_cs_ib_chunk] *ERROR* Invalid command stream !
>
> Meanwhile, windows on the desktop are rendered incorrectly (with
> certain regions covered by strange patterns or smudged) or not at all.
> This makes the desktop unusable.
>
> I can always reproduce this problem on 3.4
>
> Kernels prior to 3.4 work fine.
>
> I will try and find the time to bisect this issue but meanwhile here
> are some further details:
>
I have git-bisected this to find that the first bad commit is:
285484e2d55 - drm/radeon: add support for evergreen/ni tiling
informations v11.
So I have also added Jerome to the CC list. Please see the attached
bisect.log for the git-bisect log.
Once again, my card is:
01:00.0 VGA compatible controller: ATI Technologies Inc Redwood
[Radeon HD 5600 Series] (prog-if 00 [VGA controller])
Subsystem: Dell Device 0447
Flags: bus master, fast devsel, latency 0, IRQ 47
Memory at c0000000 (64-bit, prefetchable) [size=256M]
Memory at fbe20000 (64-bit, non-prefetchable) [size=128K]
I/O ports at e000 [size=256]
Expansion ROM at fbe00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
Kernel modules: radeon
To reproduce, simply:
1. Install Ubuntu 11.04 on a system with the above Radeon card (In
order to get the version of Xorg and DRM libs that I have)
2. Boot and login.
The problem manifests upon login, presumably on that start of Compiz
but I am not sure.
--
Brian Gitonga Marete
Toshnix Systems - http://toshnix.com
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Regression] [Radeon] Stream command failures and render problems in Evergreen (Radeon HD 5600) in kernel 3.4
2012-06-06 22:59 ` Brian Gitonga Marete
@ 2012-06-06 23:01 ` Brian Gitonga Marete
2012-06-07 14:25 ` Jerome Glisse
0 siblings, 1 reply; 30+ messages in thread
From: Brian Gitonga Marete @ 2012-06-06 23:01 UTC (permalink / raw)
To: LKML; +Cc: David Airlie, Alex Deucher, Jerome Glisse
[-- Attachment #1: Type: text/plain, Size: 3059 bytes --]
On Thu, Jun 7, 2012 at 1:59 AM, Brian Gitonga Marete <marete@toshnix.com> wrote:
> On Sun, Jun 3, 2012 at 8:26 PM, Brian Gitonga Marete <marete@toshnix.com> wrote:
>> Hello,
>>
>> 3.4 breaks rendering on my Radeon evergreen card. Immediately after
>> logging in into the desktop, I get the following errors in the kernel
>> log:
>>
>> radeon 0000:01:00.0: evergreen_cs_track_validate_cb:439 cb[0] bo too
>> small (layer size 147456, offset 0, max layer 1, bo size 143360, slice
>> 575)
>> radeon 0000:01:00.0: evergreen_cs_track_validate_cb:443 problematic
>> surf: (192 192) (0 4 1 0 0 0 0)
>> radeon 0000:01:00.0: evergreen_packet3_check:2055 invalid cmd stream 461
>> [drm:radeon_cs_ib_chunk] *ERROR* Invalid command stream !
>> radeon 0000:01:00.0: evergreen_cs_track_validate_cb:439 cb[0] bo too
>> small (layer size 147456, offset 0, max layer 1, bo size 143360, slice
>> 575)
>> radeon 0000:01:00.0: evergreen_cs_track_validate_cb:443 problematic
>> surf: (192 192) (0 4 1 0 0 0 0)
>> radeon 0000:01:00.0: evergreen_packet3_check:2055 invalid cmd stream 461
>> [drm:radeon_cs_ib_chunk] *ERROR* Invalid command stream !
>> radeon 0000:01:00.0: evergreen_cs_track_validate_cb:439 cb[0] bo too
>> small (layer size 798720, offset 0, max layer 1, bo size 794624, slice
>> 3119)
>> radeon 0000:01:00.0: evergreen_cs_track_validate_cb:443 problematic
>> surf: (384 520) (0 4 1 0 0 0 0)
>> radeon 0000:01:00.0: evergreen_packet3_check:2055 invalid cmd stream 461
>> [drm:radeon_cs_ib_chunk] *ERROR* Invalid command stream !
>> radeon 0000:01:00.0: evergreen_cs_track_validate_cb:439 cb[0] bo too
>> small (layer size 458752, offset 0, max layer 1, bo size 446464, slice
>> 1791)
>> radeon 0000:01:00.0: evergreen_cs_track_validate_cb:443 problematic
>> surf: (512 224) (0 4 1 0 0 0 0)
>> radeon 0000:01:00.0: evergreen_packet3_check:2055 invalid cmd stream 7170
>> [drm:radeon_cs_ib_chunk] *ERROR* Invalid command stream !
>> radeon 0000:01:00.0: evergreen_cs_track_validate_cb:439 cb[0] bo too
>> small (layer size 798720, offset 0, max layer 1, bo size 790528, slice
>> 3119)
>> radeon 0000:01:00.0: evergreen_cs_track_validate_cb:443 problematic
>> surf: (384 520) (0 4 1 0 0 0 0)
>> radeon 0000:01:00.0: evergreen_packet3_check:2055 invalid cmd stream 461
>> [drm:radeon_cs_ib_chunk] *ERROR* Invalid command stream !
>>
>> Meanwhile, windows on the desktop are rendered incorrectly (with
>> certain regions covered by strange patterns or smudged) or not at all.
>> This makes the desktop unusable.
>>
>> I can always reproduce this problem on 3.4
>>
>> Kernels prior to 3.4 work fine.
>>
>> I will try and find the time to bisect this issue but meanwhile here
>> are some further details:
>>
>
> I have git-bisected this to find that the first bad commit is:
> 285484e2d55 - drm/radeon: add support for evergreen/ni tiling
> informations v11.
>
> So I have also added Jerome to the CC list. Please see the attached
> bisect.log for the git-bisect log.
Sorry, forgot to attach. Now attached.
--
Brian Gitonga Marete
Toshnix Systems - http://toshnix.com
[-- Attachment #2: bisect.log --]
[-- Type: application/octet-stream, Size: 1688 bytes --]
git bisect start 'drivers/gpu'
# bad: [76e10d158efb6d4516018846f60c2ab5501900bc] Linux 3.4
git bisect bad 76e10d158efb6d4516018846f60c2ab5501900bc
# good: [c16fa4f2ad19908a47c63d8fa436a1178438c7e7] Linux 3.3
git bisect good c16fa4f2ad19908a47c63d8fa436a1178438c7e7
# bad: [50d44a523759c39af1119285a5396ca387288af0] gma500: Fix resume paths
git bisect bad 50d44a523759c39af1119285a5396ca387288af0
# bad: [3ae19b750bdc09ce233e1504348320141593ffda] drm/radeon/kms: add wait_for_vblank asic callback
git bisect bad 3ae19b750bdc09ce233e1504348320141593ffda
# good: [0529a0d9f0e702fd5215a493b7440be73f5941af] drm/i915: correctly program the VSYNCSHIFT register
git bisect good 0529a0d9f0e702fd5215a493b7440be73f5941af
# good: [eb4f923b1ceac8a618469c51ff249bd89bc0dfa4] vmwgfx: Pick up the initial size from the width and height regs
git bisect good eb4f923b1ceac8a618469c51ff249bd89bc0dfa4
# good: [a71d8d94525e8fd855c0466fb586ae1cb008f3a2] drm/i915: Record the tail at each request and use it to estimate the head
git bisect good a71d8d94525e8fd855c0466fb586ae1cb008f3a2
# bad: [42b923b587d055cd98fb84f32e3e758672026ae9] drm/radeon/evergreen: make texdw[] array larger
git bisect bad 42b923b587d055cd98fb84f32e3e758672026ae9
# good: [51a59ac8739b333eaa43a3102b6acaab5037bfa2] drm: Fix kcalloc parameters swapped
git bisect good 51a59ac8739b333eaa43a3102b6acaab5037bfa2
# bad: [285484e2d55e76031b45926720c10b1aec8b782a] drm/radeon: add support for evergreen/ni tiling informations v11
git bisect bad 285484e2d55e76031b45926720c10b1aec8b782a
# good: [dd220a00e8bd5ad7f98ecdc3eed699a7cfabdc27] drm/radeon/kms: add support for streamout v7
git bisect good dd220a00e8bd5ad7f98ecdc3eed699a7cfabdc27
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Regression] [Radeon] Stream command failures and render problems in Evergreen (Radeon HD 5600) in kernel 3.4
2012-06-06 23:01 ` Brian Gitonga Marete
@ 2012-06-07 14:25 ` Jerome Glisse
2012-06-07 14:35 ` Brian Gitonga Marete
` (2 more replies)
0 siblings, 3 replies; 30+ messages in thread
From: Jerome Glisse @ 2012-06-07 14:25 UTC (permalink / raw)
To: Brian Gitonga Marete; +Cc: LKML, David Airlie, Alex Deucher, Jerome Glisse
On Wed, Jun 6, 2012 at 7:01 PM, Brian Gitonga Marete <marete@toshnix.com> wrote:
> On Thu, Jun 7, 2012 at 1:59 AM, Brian Gitonga Marete <marete@toshnix.com> wrote:
>> On Sun, Jun 3, 2012 at 8:26 PM, Brian Gitonga Marete <marete@toshnix.com> wrote:
>>> Hello,
>>>
>>> 3.4 breaks rendering on my Radeon evergreen card. Immediately after
>>> logging in into the desktop, I get the following errors in the kernel
>>> log:
>>>
>>> radeon 0000:01:00.0: evergreen_cs_track_validate_cb:439 cb[0] bo too
>>> small (layer size 147456, offset 0, max layer 1, bo size 143360, slice
>>> 575)
>>> radeon 0000:01:00.0: evergreen_cs_track_validate_cb:443 problematic
>>> surf: (192 192) (0 4 1 0 0 0 0)
>>> radeon 0000:01:00.0: evergreen_packet3_check:2055 invalid cmd stream 461
>>> [drm:radeon_cs_ib_chunk] *ERROR* Invalid command stream !
>>> radeon 0000:01:00.0: evergreen_cs_track_validate_cb:439 cb[0] bo too
>>> small (layer size 147456, offset 0, max layer 1, bo size 143360, slice
>>> 575)
>>> radeon 0000:01:00.0: evergreen_cs_track_validate_cb:443 problematic
>>> surf: (192 192) (0 4 1 0 0 0 0)
>>> radeon 0000:01:00.0: evergreen_packet3_check:2055 invalid cmd stream 461
>>> [drm:radeon_cs_ib_chunk] *ERROR* Invalid command stream !
>>> radeon 0000:01:00.0: evergreen_cs_track_validate_cb:439 cb[0] bo too
>>> small (layer size 798720, offset 0, max layer 1, bo size 794624, slice
>>> 3119)
>>> radeon 0000:01:00.0: evergreen_cs_track_validate_cb:443 problematic
>>> surf: (384 520) (0 4 1 0 0 0 0)
>>> radeon 0000:01:00.0: evergreen_packet3_check:2055 invalid cmd stream 461
>>> [drm:radeon_cs_ib_chunk] *ERROR* Invalid command stream !
>>> radeon 0000:01:00.0: evergreen_cs_track_validate_cb:439 cb[0] bo too
>>> small (layer size 458752, offset 0, max layer 1, bo size 446464, slice
>>> 1791)
>>> radeon 0000:01:00.0: evergreen_cs_track_validate_cb:443 problematic
>>> surf: (512 224) (0 4 1 0 0 0 0)
>>> radeon 0000:01:00.0: evergreen_packet3_check:2055 invalid cmd stream 7170
>>> [drm:radeon_cs_ib_chunk] *ERROR* Invalid command stream !
>>> radeon 0000:01:00.0: evergreen_cs_track_validate_cb:439 cb[0] bo too
>>> small (layer size 798720, offset 0, max layer 1, bo size 790528, slice
>>> 3119)
>>> radeon 0000:01:00.0: evergreen_cs_track_validate_cb:443 problematic
>>> surf: (384 520) (0 4 1 0 0 0 0)
>>> radeon 0000:01:00.0: evergreen_packet3_check:2055 invalid cmd stream 461
>>> [drm:radeon_cs_ib_chunk] *ERROR* Invalid command stream !
>>>
>>> Meanwhile, windows on the desktop are rendered incorrectly (with
>>> certain regions covered by strange patterns or smudged) or not at all.
>>> This makes the desktop unusable.
>>>
>>> I can always reproduce this problem on 3.4
>>>
>>> Kernels prior to 3.4 work fine.
>>>
>>> I will try and find the time to bisect this issue but meanwhile here
>>> are some further details:
>>>
>>
>> I have git-bisected this to find that the first bad commit is:
>> 285484e2d55 - drm/radeon: add support for evergreen/ni tiling
>> informations v11.
>>
>> So I have also added Jerome to the CC list. Please see the attached
>> bisect.log for the git-bisect log.
>
> Sorry, forgot to attach. Now attached.
>
> --
> Brian Gitonga Marete
> Toshnix Systems - http://toshnix.com
Update your libdrm to libdrm from git should fix your issue.
Cheers,
Jerome
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Regression] [Radeon] Stream command failures and render problems in Evergreen (Radeon HD 5600) in kernel 3.4
2012-06-07 14:25 ` Jerome Glisse
@ 2012-06-07 14:35 ` Brian Gitonga Marete
2012-06-07 15:35 ` Roland Dreier
2012-06-07 19:59 ` Brian Gitonga Marete
2 siblings, 0 replies; 30+ messages in thread
From: Brian Gitonga Marete @ 2012-06-07 14:35 UTC (permalink / raw)
To: Jerome Glisse; +Cc: LKML, David Airlie, Alex Deucher, Jerome Glisse
On Thu, Jun 7, 2012 at 5:25 PM, Jerome Glisse <j.glisse@gmail.com> wrote:
> Update your libdrm to libdrm from git should fix your issue.
Thanks Jerome. Will try that and report back promptly.
--
Brian Gitonga Marete
Toshnix Systems - http://toshnix.com
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Regression] [Radeon] Stream command failures and render problems in Evergreen (Radeon HD 5600) in kernel 3.4
2012-06-07 14:25 ` Jerome Glisse
2012-06-07 14:35 ` Brian Gitonga Marete
@ 2012-06-07 15:35 ` Roland Dreier
2012-06-07 16:22 ` Jerome Glisse
2012-06-07 19:59 ` Brian Gitonga Marete
2 siblings, 1 reply; 30+ messages in thread
From: Roland Dreier @ 2012-06-07 15:35 UTC (permalink / raw)
To: Jerome Glisse
Cc: Brian Gitonga Marete, LKML, David Airlie, Alex Deucher, Jerome Glisse
> Update your libdrm to libdrm from git should fix your issue.
That's unfortunate -- it means a kernel change breaks working userspace?
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Regression] [Radeon] Stream command failures and render problems in Evergreen (Radeon HD 5600) in kernel 3.4
2012-06-07 15:35 ` Roland Dreier
@ 2012-06-07 16:22 ` Jerome Glisse
0 siblings, 0 replies; 30+ messages in thread
From: Jerome Glisse @ 2012-06-07 16:22 UTC (permalink / raw)
To: Roland Dreier
Cc: Brian Gitonga Marete, LKML, David Airlie, Alex Deucher, Jerome Glisse
On Thu, Jun 7, 2012 at 11:35 AM, Roland Dreier <roland@purestorage.com> wrote:
>> Update your libdrm to libdrm from git should fix your issue.
>
> That's unfortunate -- it means a kernel change breaks working userspace?
Yes and no, welcome to GPU world. So this patch is suppose to report
some GPU informations to userspace, sadly on some GPU we report wrong
informations (that's a bug). So solution is to fix kernel to report
right information, i think the following patch does that.
http://www.mail-archive.com/stable@vger.kernel.org/msg09247.html
The no side, is to have it broken you also need to have upgraded your
libdrm, ie old libdrm/radeon with this kernel will work as previously.
This issue have been fix recently in libdrm :
http://cgit.freedesktop.org/mesa/drm/commit/?id=c2b77a02d4e188cfa6d1b73a721946fd9b1d3577
Of course here i am assuming that the bug Brian is experiencing is
related to wrong tile infos reporting.
Cheers,
Jerome
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Regression] [Radeon] Stream command failures and render problems in Evergreen (Radeon HD 5600) in kernel 3.4
2012-06-07 14:25 ` Jerome Glisse
2012-06-07 14:35 ` Brian Gitonga Marete
2012-06-07 15:35 ` Roland Dreier
@ 2012-06-07 19:59 ` Brian Gitonga Marete
2012-06-07 20:20 ` Jerome Glisse
2 siblings, 1 reply; 30+ messages in thread
From: Brian Gitonga Marete @ 2012-06-07 19:59 UTC (permalink / raw)
To: Jerome Glisse; +Cc: LKML, David Airlie, Alex Deucher, Jerome Glisse
On Thu, Jun 7, 2012 at 5:25 PM, Jerome Glisse <j.glisse@gmail.com> wrote:
>
> Update your libdrm to libdrm from git should fix your issue.
Hello Jerome,
Thanks for looking into this.
I am afraid that even with the very latest libdrm (git 93a5117d), the
rendering is still broken.
What else should I try? I would revert the patch that git-bisect
fingered (your patch, git 285484e2d, Linux mainline) but there are
merge problems when I try to do that, which I have not yet looked
into. Perhaps you can see if you can help me revert that patch so that
we can see if the problem then goes away?
Thanks!
--
Brian Gitonga Marete
Toshnix Systems - http://toshnix.com
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Regression] [Radeon] Stream command failures and render problems in Evergreen (Radeon HD 5600) in kernel 3.4
2012-06-07 19:59 ` Brian Gitonga Marete
@ 2012-06-07 20:20 ` Jerome Glisse
2012-06-07 20:22 ` Brian Gitonga Marete
2012-06-07 21:44 ` Brian Gitonga Marete
0 siblings, 2 replies; 30+ messages in thread
From: Jerome Glisse @ 2012-06-07 20:20 UTC (permalink / raw)
To: Brian Gitonga Marete; +Cc: LKML, David Airlie, Alex Deucher, Jerome Glisse
On Thu, Jun 7, 2012 at 3:59 PM, Brian Gitonga Marete <marete@toshnix.com> wrote:
> On Thu, Jun 7, 2012 at 5:25 PM, Jerome Glisse <j.glisse@gmail.com> wrote:
>>
>> Update your libdrm to libdrm from git should fix your issue.
>
> Hello Jerome,
>
> Thanks for looking into this.
>
> I am afraid that even with the very latest libdrm (git 93a5117d), the
> rendering is still broken.
>
> What else should I try? I would revert the patch that git-bisect
> fingered (your patch, git 285484e2d, Linux mainline) but there are
> merge problems when I try to do that, which I have not yet looked
> into. Perhaps you can see if you can help me revert that patch so that
> we can see if the problem then goes away?
>
> Thanks!
>
> --
> Brian Gitonga Marete
> Toshnix Systems - http://toshnix.com
What happen if you upgrade to xf86-video-ati from git ?
Cheers,
Jerome
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Regression] [Radeon] Stream command failures and render problems in Evergreen (Radeon HD 5600) in kernel 3.4
2012-06-07 20:20 ` Jerome Glisse
@ 2012-06-07 20:22 ` Brian Gitonga Marete
2012-06-07 20:23 ` Jerome Glisse
2012-06-07 21:44 ` Brian Gitonga Marete
1 sibling, 1 reply; 30+ messages in thread
From: Brian Gitonga Marete @ 2012-06-07 20:22 UTC (permalink / raw)
To: Jerome Glisse; +Cc: LKML, David Airlie, Alex Deucher, Jerome Glisse
On Thu, Jun 7, 2012 at 11:20 PM, Jerome Glisse <j.glisse@gmail.com> wrote:
> What happen if you upgrade to xf86-video-ati from git ?
>
Had actually just though of that and cloned it :) Will try and report.
Thanks!
--
Brian Gitonga Marete
Toshnix Systems - http://toshnix.com
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Regression] [Radeon] Stream command failures and render problems in Evergreen (Radeon HD 5600) in kernel 3.4
2012-06-07 20:22 ` Brian Gitonga Marete
@ 2012-06-07 20:23 ` Jerome Glisse
2012-06-07 20:26 ` Brian Gitonga Marete
0 siblings, 1 reply; 30+ messages in thread
From: Jerome Glisse @ 2012-06-07 20:23 UTC (permalink / raw)
To: Brian Gitonga Marete; +Cc: LKML, David Airlie, Alex Deucher, Jerome Glisse
On Thu, Jun 7, 2012 at 4:22 PM, Brian Gitonga Marete <marete@toshnix.com> wrote:
> On Thu, Jun 7, 2012 at 11:20 PM, Jerome Glisse <j.glisse@gmail.com> wrote:
>> What happen if you upgrade to xf86-video-ati from git ?
>>
>
> Had actually just though of that and cloned it :) Will try and report.
>
> Thanks!
>
> --
> Brian Gitonga Marete
> Toshnix Systems - http://toshnix.com
If it works please also give me mesa version, and am i right assuming
you are using unity ? Is this a stock ubuntu 12 installation (ie not
custome package) ?
Cheers,
Jerome
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Regression] [Radeon] Stream command failures and render problems in Evergreen (Radeon HD 5600) in kernel 3.4
2012-06-07 20:23 ` Jerome Glisse
@ 2012-06-07 20:26 ` Brian Gitonga Marete
2012-06-07 20:29 ` Brian Gitonga Marete
0 siblings, 1 reply; 30+ messages in thread
From: Brian Gitonga Marete @ 2012-06-07 20:26 UTC (permalink / raw)
To: Jerome Glisse; +Cc: LKML, David Airlie, Alex Deucher, Jerome Glisse
On Thu, Jun 7, 2012 at 11:23 PM, Jerome Glisse <j.glisse@gmail.com> wrote:
> On Thu, Jun 7, 2012 at 4:22 PM, Brian Gitonga Marete <marete@toshnix.com> wrote:
>> On Thu, Jun 7, 2012 at 11:20 PM, Jerome Glisse <j.glisse@gmail.com> wrote:
>>> What happen if you upgrade to xf86-video-ati from git ?
>>>
>>
>> Had actually just though of that and cloned it :) Will try and report.
>>
>> Thanks!
>>
>> --
>> Brian Gitonga Marete
>> Toshnix Systems - http://toshnix.com
>
> If it works please also give me mesa version, and am i right assuming
> you are using unity ? Is this a stock ubuntu 12 installation (ie not
> custome package) ?
>
These are stock Ubuntu 11.04 Xorg/drm/mesa packages. I am using Ubuntu
in the _classic_ mode, not in the usual Unity mode.
--
Brian Gitonga Marete
Toshnix Systems - http://toshnix.com
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Regression] [Radeon] Stream command failures and render problems in Evergreen (Radeon HD 5600) in kernel 3.4
2012-06-07 20:26 ` Brian Gitonga Marete
@ 2012-06-07 20:29 ` Brian Gitonga Marete
0 siblings, 0 replies; 30+ messages in thread
From: Brian Gitonga Marete @ 2012-06-07 20:29 UTC (permalink / raw)
To: Jerome Glisse; +Cc: LKML, David Airlie, Alex Deucher, Jerome Glisse
On Thu, Jun 7, 2012 at 11:26 PM, Brian Gitonga Marete
<marete@toshnix.com> wrote:
> On Thu, Jun 7, 2012 at 11:23 PM, Jerome Glisse <j.glisse@gmail.com> wrote:
>> On Thu, Jun 7, 2012 at 4:22 PM, Brian Gitonga Marete <marete@toshnix.com> wrote:
>>> On Thu, Jun 7, 2012 at 11:20 PM, Jerome Glisse <j.glisse@gmail.com> wrote:
>>>> What happen if you upgrade to xf86-video-ati from git ?
>>>>
>>>
>>> Had actually just though of that and cloned it :) Will try and report.
>>>
>>> Thanks!
>>>
>>> --
>>> Brian Gitonga Marete
>>> Toshnix Systems - http://toshnix.com
>>
>> If it works please also give me mesa version, and am i right assuming
>> you are using unity ? Is this a stock ubuntu 12 installation (ie not
>> custome package) ?
>>
>
> These are stock Ubuntu 11.04 Xorg/drm/mesa packages. I am using Ubuntu
> in the _classic_ mode, not in the usual Unity mode.
>
By stock, I mean they are the official _and_ fully updated Ubuntu
11.04 packages.
Will compile the git radeon drivers and test. Thanks!
BGM.
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Regression] [Radeon] Stream command failures and render problems in Evergreen (Radeon HD 5600) in kernel 3.4
2012-06-07 20:20 ` Jerome Glisse
2012-06-07 20:22 ` Brian Gitonga Marete
@ 2012-06-07 21:44 ` Brian Gitonga Marete
2012-06-07 21:56 ` Brian Gitonga Marete
1 sibling, 1 reply; 30+ messages in thread
From: Brian Gitonga Marete @ 2012-06-07 21:44 UTC (permalink / raw)
To: Jerome Glisse; +Cc: LKML, David Airlie, Alex Deucher, Jerome Glisse
On Thu, Jun 7, 2012 at 11:20 PM, Jerome Glisse <j.glisse@gmail.com> wrote:
> On Thu, Jun 7, 2012 at 3:59 PM, Brian Gitonga Marete <marete@toshnix.com> wrote:
>> On Thu, Jun 7, 2012 at 5:25 PM, Jerome Glisse <j.glisse@gmail.com> wrote:
>>>
>>> Update your libdrm to libdrm from git should fix your issue.
>>
>> Hello Jerome,
>>
>> Thanks for looking into this.
>>
>> I am afraid that even with the very latest libdrm (git 93a5117d), the
>> rendering is still broken.
>>
>> What else should I try? I would revert the patch that git-bisect
>> fingered (your patch, git 285484e2d, Linux mainline) but there are
>> merge problems when I try to do that, which I have not yet looked
>> into. Perhaps you can see if you can help me revert that patch so that
>> we can see if the problem then goes away?
>>
> What happen if you upgrade to xf86-video-ati from git ?
Hello Jerome,
Once again, thanks a lot for your help.
Some progress but also a setback: Upgrading to the latest
xf86-video-ati git gets rid of the stream command failures - No more
error messages in dmesg(8). But then, now, rendering is completely
messed up. Previously, it was mostly the window boundaries that were
blurred/messed but now also entire windows and text so that you can't
read anything from the desktop. (For example, the previous render
problems would still allow me to use gnome-terminal even though its
frames were completely blurred. Now the text withing gnome-terminal is
also blurred/smudged)
Do you recommend that I also try to upgrade Mesa? (I have to solve a
gl-proto library dependency before I can do that.) Or perhaps rebuild
Compiz itself against the new libdrm and xf86-video-ati? What do you
recommend?
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Regression] [Radeon] Stream command failures and render problems in Evergreen (Radeon HD 5600) in kernel 3.4
2012-06-07 21:44 ` Brian Gitonga Marete
@ 2012-06-07 21:56 ` Brian Gitonga Marete
2012-06-08 10:13 ` Brian Gitonga Marete
0 siblings, 1 reply; 30+ messages in thread
From: Brian Gitonga Marete @ 2012-06-07 21:56 UTC (permalink / raw)
To: Jerome Glisse; +Cc: LKML, David Airlie, Alex Deucher, Jerome Glisse
On Fri, Jun 8, 2012 at 12:44 AM, Brian Gitonga Marete
<marete@toshnix.com> wrote:
> On Thu, Jun 7, 2012 at 11:20 PM, Jerome Glisse <j.glisse@gmail.com> wrote:
>> On Thu, Jun 7, 2012 at 3:59 PM, Brian Gitonga Marete <marete@toshnix.com> wrote:
>>> On Thu, Jun 7, 2012 at 5:25 PM, Jerome Glisse <j.glisse@gmail.com> wrote:
>>>>
>>>> Update your libdrm to libdrm from git should fix your issue.
>>>
>>> Hello Jerome,
>>>
>>> Thanks for looking into this.
>>>
>>> I am afraid that even with the very latest libdrm (git 93a5117d), the
>>> rendering is still broken.
>>>
>>> What else should I try? I would revert the patch that git-bisect
>>> fingered (your patch, git 285484e2d, Linux mainline) but there are
>>> merge problems when I try to do that, which I have not yet looked
>>> into. Perhaps you can see if you can help me revert that patch so that
>>> we can see if the problem then goes away?
>>>
>> What happen if you upgrade to xf86-video-ati from git ?
>
> Hello Jerome,
>
> Once again, thanks a lot for your help.
>
> Some progress but also a setback: Upgrading to the latest
> xf86-video-ati git gets rid of the stream command failures - No more
> error messages in dmesg(8). But then, now, rendering is completely
> messed up. Previously, it was mostly the window boundaries that were
> blurred/messed but now also entire windows and text so that you can't
> read anything from the desktop. (For example, the previous render
> problems would still allow me to use gnome-terminal even though its
> frames were completely blurred. Now the text withing gnome-terminal is
> also blurred/smudged)
>
I should add that in this case rendering is completely messed up in
_both_ 3.3.x and 3.4. But the stream command failures in 3.4 go away
upon upgrading to the latext xf86-video-ati git HEAD.
Thanks.
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Regression] [Radeon] Stream command failures and render problems in Evergreen (Radeon HD 5600) in kernel 3.4
2012-06-07 21:56 ` Brian Gitonga Marete
@ 2012-06-08 10:13 ` Brian Gitonga Marete
2012-06-08 14:51 ` Jerome Glisse
2012-06-08 19:56 ` Jerome Glisse
0 siblings, 2 replies; 30+ messages in thread
From: Brian Gitonga Marete @ 2012-06-08 10:13 UTC (permalink / raw)
To: Jerome Glisse; +Cc: LKML, David Airlie, Alex Deucher, Jerome Glisse
On Fri, Jun 8, 2012 at 12:56 AM, Brian Gitonga Marete
<marete@toshnix.com> wrote:
> On Fri, Jun 8, 2012 at 12:44 AM, Brian Gitonga Marete
> <marete@toshnix.com> wrote:
>> On Thu, Jun 7, 2012 at 11:20 PM, Jerome Glisse <j.glisse@gmail.com> wrote:
>>> On Thu, Jun 7, 2012 at 3:59 PM, Brian Gitonga Marete <marete@toshnix.com> wrote:
>>>> On Thu, Jun 7, 2012 at 5:25 PM, Jerome Glisse <j.glisse@gmail.com> wrote:
>>>>>
>>>>> Update your libdrm to libdrm from git should fix your issue.
>>>>
>>>> Hello Jerome,
>>>>
>>>> Thanks for looking into this.
>>>>
>>>> I am afraid that even with the very latest libdrm (git 93a5117d), the
>>>> rendering is still broken.
>>>>
>>>> What else should I try? I would revert the patch that git-bisect
>>>> fingered (your patch, git 285484e2d, Linux mainline) but there are
>>>> merge problems when I try to do that, which I have not yet looked
>>>> into. Perhaps you can see if you can help me revert that patch so that
>>>> we can see if the problem then goes away?
>>>>
>>> What happen if you upgrade to xf86-video-ati from git ?
>>
>> Hello Jerome,
>>
>> Once again, thanks a lot for your help.
>>
>> Some progress but also a setback: Upgrading to the latest
>> xf86-video-ati git gets rid of the stream command failures - No more
>> error messages in dmesg(8). But then, now, rendering is completely
>> messed up. Previously, it was mostly the window boundaries that were
>> blurred/messed but now also entire windows and text so that you can't
>> read anything from the desktop. (For example, the previous render
>> problems would still allow me to use gnome-terminal even though its
>> frames were completely blurred. Now the text withing gnome-terminal is
>> also blurred/smudged)
>>
>
> I should add that in this case rendering is completely messed up in
> _both_ 3.3.x and 3.4. But the stream command failures in 3.4 go away
> upon upgrading to the latext xf86-video-ati git HEAD.
Ok. All is fixed in kernel v3.4 if I additionally upgrade Mesa to the
latest git. Jerome, many thanks for your help on this!
So to summarize, the 3.4 breakage in Ubuntu 11.04 (and probably other
distributions released around the same time) is fixed by:
a) Upgrade libdrm to latest GIT as of this writing (93a5117d5)
b) Upgrade xf86-video-ati to latest GIT as of this writing (5888371)
c) Upgrade mesa to latest GIT as of this writing (529476b)
Now kernel 3.4 works on my laptop.
Thanks!
BGM.
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Regression] [Radeon] Stream command failures and render problems in Evergreen (Radeon HD 5600) in kernel 3.4
2012-06-08 10:13 ` Brian Gitonga Marete
@ 2012-06-08 14:51 ` Jerome Glisse
2012-06-08 20:26 ` Brian Gitonga Marete
2012-06-08 19:56 ` Jerome Glisse
1 sibling, 1 reply; 30+ messages in thread
From: Jerome Glisse @ 2012-06-08 14:51 UTC (permalink / raw)
To: Brian Gitonga Marete; +Cc: LKML, David Airlie, Alex Deucher, Jerome Glisse
On Fri, Jun 8, 2012 at 6:13 AM, Brian Gitonga Marete <marete@toshnix.com> wrote:
> On Fri, Jun 8, 2012 at 12:56 AM, Brian Gitonga Marete
> <marete@toshnix.com> wrote:
>> On Fri, Jun 8, 2012 at 12:44 AM, Brian Gitonga Marete
>> <marete@toshnix.com> wrote:
>>> On Thu, Jun 7, 2012 at 11:20 PM, Jerome Glisse <j.glisse@gmail.com> wrote:
>>>> On Thu, Jun 7, 2012 at 3:59 PM, Brian Gitonga Marete <marete@toshnix.com> wrote:
>>>>> On Thu, Jun 7, 2012 at 5:25 PM, Jerome Glisse <j.glisse@gmail.com> wrote:
>>>>>>
>>>>>> Update your libdrm to libdrm from git should fix your issue.
>>>>>
>>>>> Hello Jerome,
>>>>>
>>>>> Thanks for looking into this.
>>>>>
>>>>> I am afraid that even with the very latest libdrm (git 93a5117d), the
>>>>> rendering is still broken.
>>>>>
>>>>> What else should I try? I would revert the patch that git-bisect
>>>>> fingered (your patch, git 285484e2d, Linux mainline) but there are
>>>>> merge problems when I try to do that, which I have not yet looked
>>>>> into. Perhaps you can see if you can help me revert that patch so that
>>>>> we can see if the problem then goes away?
>>>>>
>>>> What happen if you upgrade to xf86-video-ati from git ?
>>>
>>> Hello Jerome,
>>>
>>> Once again, thanks a lot for your help.
>>>
>>> Some progress but also a setback: Upgrading to the latest
>>> xf86-video-ati git gets rid of the stream command failures - No more
>>> error messages in dmesg(8). But then, now, rendering is completely
>>> messed up. Previously, it was mostly the window boundaries that were
>>> blurred/messed but now also entire windows and text so that you can't
>>> read anything from the desktop. (For example, the previous render
>>> problems would still allow me to use gnome-terminal even though its
>>> frames were completely blurred. Now the text withing gnome-terminal is
>>> also blurred/smudged)
>>>
>>
>> I should add that in this case rendering is completely messed up in
>> _both_ 3.3.x and 3.4. But the stream command failures in 3.4 go away
>> upon upgrading to the latext xf86-video-ati git HEAD.
>
> Ok. All is fixed in kernel v3.4 if I additionally upgrade Mesa to the
> latest git. Jerome, many thanks for your help on this!
>
> So to summarize, the 3.4 breakage in Ubuntu 11.04 (and probably other
> distributions released around the same time) is fixed by:
>
> a) Upgrade libdrm to latest GIT as of this writing (93a5117d5)
> b) Upgrade xf86-video-ati to latest GIT as of this writing (5888371)
> c) Upgrade mesa to latest GIT as of this writing (529476b)
>
> Now kernel 3.4 works on my laptop.
>
> Thanks!
>
> BGM.
Well i still need to find out what's wrong with 6.14.0, what your
screen resolution ?
Cheers,
Jerome
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Regression] [Radeon] Stream command failures and render problems in Evergreen (Radeon HD 5600) in kernel 3.4
2012-06-08 10:13 ` Brian Gitonga Marete
2012-06-08 14:51 ` Jerome Glisse
@ 2012-06-08 19:56 ` Jerome Glisse
2012-06-08 19:56 ` Jerome Glisse
2012-06-08 20:28 ` Brian Gitonga Marete
1 sibling, 2 replies; 30+ messages in thread
From: Jerome Glisse @ 2012-06-08 19:56 UTC (permalink / raw)
To: Brian Gitonga Marete; +Cc: LKML, David Airlie, Alex Deucher, Jerome Glisse
On Fri, Jun 8, 2012 at 6:13 AM, Brian Gitonga Marete <marete@toshnix.com> wrote:
> On Fri, Jun 8, 2012 at 12:56 AM, Brian Gitonga Marete
> <marete@toshnix.com> wrote:
>> On Fri, Jun 8, 2012 at 12:44 AM, Brian Gitonga Marete
>> <marete@toshnix.com> wrote:
>>> On Thu, Jun 7, 2012 at 11:20 PM, Jerome Glisse <j.glisse@gmail.com> wrote:
>>>> On Thu, Jun 7, 2012 at 3:59 PM, Brian Gitonga Marete <marete@toshnix.com> wrote:
>>>>> On Thu, Jun 7, 2012 at 5:25 PM, Jerome Glisse <j.glisse@gmail.com> wrote:
>>>>>>
>>>>>> Update your libdrm to libdrm from git should fix your issue.
>>>>>
>>>>> Hello Jerome,
>>>>>
>>>>> Thanks for looking into this.
>>>>>
>>>>> I am afraid that even with the very latest libdrm (git 93a5117d), the
>>>>> rendering is still broken.
>>>>>
>>>>> What else should I try? I would revert the patch that git-bisect
>>>>> fingered (your patch, git 285484e2d, Linux mainline) but there are
>>>>> merge problems when I try to do that, which I have not yet looked
>>>>> into. Perhaps you can see if you can help me revert that patch so that
>>>>> we can see if the problem then goes away?
>>>>>
>>>> What happen if you upgrade to xf86-video-ati from git ?
>>>
>>> Hello Jerome,
>>>
>>> Once again, thanks a lot for your help.
>>>
>>> Some progress but also a setback: Upgrading to the latest
>>> xf86-video-ati git gets rid of the stream command failures - No more
>>> error messages in dmesg(8). But then, now, rendering is completely
>>> messed up. Previously, it was mostly the window boundaries that were
>>> blurred/messed but now also entire windows and text so that you can't
>>> read anything from the desktop. (For example, the previous render
>>> problems would still allow me to use gnome-terminal even though its
>>> frames were completely blurred. Now the text withing gnome-terminal is
>>> also blurred/smudged)
>>>
>>
>> I should add that in this case rendering is completely messed up in
>> _both_ 3.3.x and 3.4. But the stream command failures in 3.4 go away
>> upon upgrading to the latext xf86-video-ati git HEAD.
>
> Ok. All is fixed in kernel v3.4 if I additionally upgrade Mesa to the
> latest git. Jerome, many thanks for your help on this!
>
> So to summarize, the 3.4 breakage in Ubuntu 11.04 (and probably other
> distributions released around the same time) is fixed by:
>
> a) Upgrade libdrm to latest GIT as of this writing (93a5117d5)
> b) Upgrade xf86-video-ati to latest GIT as of this writing (5888371)
> c) Upgrade mesa to latest GIT as of this writing (529476b)
>
> Now kernel 3.4 works on my laptop.
>
> Thanks!
>
> BGM.
Brian can you please test patch below on 6.14.0 ddx and old mesa (ie
revert to ubuntu mesa & ddx) and report if it fix your issue. Thanks
http://people.freedesktop.org/~glisse/0001-drm-radeon-fix-tiling-and-command-stream-checking-on.patch
Cheers,
Jerome
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Regression] [Radeon] Stream command failures and render problems in Evergreen (Radeon HD 5600) in kernel 3.4
2012-06-08 19:56 ` Jerome Glisse
@ 2012-06-08 19:56 ` Jerome Glisse
2012-06-08 20:28 ` Brian Gitonga Marete
1 sibling, 0 replies; 30+ messages in thread
From: Jerome Glisse @ 2012-06-08 19:56 UTC (permalink / raw)
To: Brian Gitonga Marete; +Cc: LKML, David Airlie, Alex Deucher, Jerome Glisse
On Fri, Jun 8, 2012 at 3:56 PM, Jerome Glisse <j.glisse@gmail.com> wrote:
> On Fri, Jun 8, 2012 at 6:13 AM, Brian Gitonga Marete <marete@toshnix.com> wrote:
>> On Fri, Jun 8, 2012 at 12:56 AM, Brian Gitonga Marete
>> <marete@toshnix.com> wrote:
>>> On Fri, Jun 8, 2012 at 12:44 AM, Brian Gitonga Marete
>>> <marete@toshnix.com> wrote:
>>>> On Thu, Jun 7, 2012 at 11:20 PM, Jerome Glisse <j.glisse@gmail.com> wrote:
>>>>> On Thu, Jun 7, 2012 at 3:59 PM, Brian Gitonga Marete <marete@toshnix.com> wrote:
>>>>>> On Thu, Jun 7, 2012 at 5:25 PM, Jerome Glisse <j.glisse@gmail.com> wrote:
>>>>>>>
>>>>>>> Update your libdrm to libdrm from git should fix your issue.
>>>>>>
>>>>>> Hello Jerome,
>>>>>>
>>>>>> Thanks for looking into this.
>>>>>>
>>>>>> I am afraid that even with the very latest libdrm (git 93a5117d), the
>>>>>> rendering is still broken.
>>>>>>
>>>>>> What else should I try? I would revert the patch that git-bisect
>>>>>> fingered (your patch, git 285484e2d, Linux mainline) but there are
>>>>>> merge problems when I try to do that, which I have not yet looked
>>>>>> into. Perhaps you can see if you can help me revert that patch so that
>>>>>> we can see if the problem then goes away?
>>>>>>
>>>>> What happen if you upgrade to xf86-video-ati from git ?
>>>>
>>>> Hello Jerome,
>>>>
>>>> Once again, thanks a lot for your help.
>>>>
>>>> Some progress but also a setback: Upgrading to the latest
>>>> xf86-video-ati git gets rid of the stream command failures - No more
>>>> error messages in dmesg(8). But then, now, rendering is completely
>>>> messed up. Previously, it was mostly the window boundaries that were
>>>> blurred/messed but now also entire windows and text so that you can't
>>>> read anything from the desktop. (For example, the previous render
>>>> problems would still allow me to use gnome-terminal even though its
>>>> frames were completely blurred. Now the text withing gnome-terminal is
>>>> also blurred/smudged)
>>>>
>>>
>>> I should add that in this case rendering is completely messed up in
>>> _both_ 3.3.x and 3.4. But the stream command failures in 3.4 go away
>>> upon upgrading to the latext xf86-video-ati git HEAD.
>>
>> Ok. All is fixed in kernel v3.4 if I additionally upgrade Mesa to the
>> latest git. Jerome, many thanks for your help on this!
>>
>> So to summarize, the 3.4 breakage in Ubuntu 11.04 (and probably other
>> distributions released around the same time) is fixed by:
>>
>> a) Upgrade libdrm to latest GIT as of this writing (93a5117d5)
>> b) Upgrade xf86-video-ati to latest GIT as of this writing (5888371)
>> c) Upgrade mesa to latest GIT as of this writing (529476b)
>>
>> Now kernel 3.4 works on my laptop.
>>
>> Thanks!
>>
>> BGM.
>
> Brian can you please test patch below on 6.14.0 ddx and old mesa (ie
> revert to ubuntu mesa & ddx) and report if it fix your issue. Thanks
>
> http://people.freedesktop.org/~glisse/0001-drm-radeon-fix-tiling-and-command-stream-checking-on.patch
>
> Cheers,
> Jerome
Patch is against 3.5 but should apply on 3.4 too.
Cheers,
Jerome
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Regression] [Radeon] Stream command failures and render problems in Evergreen (Radeon HD 5600) in kernel 3.4
2012-06-08 14:51 ` Jerome Glisse
@ 2012-06-08 20:26 ` Brian Gitonga Marete
0 siblings, 0 replies; 30+ messages in thread
From: Brian Gitonga Marete @ 2012-06-08 20:26 UTC (permalink / raw)
To: Jerome Glisse; +Cc: LKML, David Airlie, Alex Deucher, Jerome Glisse
On Fri, Jun 8, 2012 at 5:51 PM, Jerome Glisse <j.glisse@gmail.com> wrote:
> On Fri, Jun 8, 2012 at 6:13 AM, Brian Gitonga Marete <marete@toshnix.com> wrote:
>> On Fri, Jun 8, 2012 at 12:56 AM, Brian Gitonga Marete
>> <marete@toshnix.com> wrote:
>>> On Fri, Jun 8, 2012 at 12:44 AM, Brian Gitonga Marete
>>> <marete@toshnix.com> wrote:
>>>> On Thu, Jun 7, 2012 at 11:20 PM, Jerome Glisse <j.glisse@gmail.com> wrote:
>>>>> On Thu, Jun 7, 2012 at 3:59 PM, Brian Gitonga Marete <marete@toshnix.com> wrote:
>>>>>> On Thu, Jun 7, 2012 at 5:25 PM, Jerome Glisse <j.glisse@gmail.com> wrote:
>>>>>>>
>>>>>>> Update your libdrm to libdrm from git should fix your issue.
>>>>>>
>>>>>> Hello Jerome,
>>>>>>
>>>>>> Thanks for looking into this.
>>>>>>
>>>>>> I am afraid that even with the very latest libdrm (git 93a5117d), the
>>>>>> rendering is still broken.
>>>>>>
>>>>>> What else should I try? I would revert the patch that git-bisect
>>>>>> fingered (your patch, git 285484e2d, Linux mainline) but there are
>>>>>> merge problems when I try to do that, which I have not yet looked
>>>>>> into. Perhaps you can see if you can help me revert that patch so that
>>>>>> we can see if the problem then goes away?
>>>>>>
>>>>> What happen if you upgrade to xf86-video-ati from git ?
>>>>
>>>> Hello Jerome,
>>>>
>>>> Once again, thanks a lot for your help.
>>>>
>>>> Some progress but also a setback: Upgrading to the latest
>>>> xf86-video-ati git gets rid of the stream command failures - No more
>>>> error messages in dmesg(8). But then, now, rendering is completely
>>>> messed up. Previously, it was mostly the window boundaries that were
>>>> blurred/messed but now also entire windows and text so that you can't
>>>> read anything from the desktop. (For example, the previous render
>>>> problems would still allow me to use gnome-terminal even though its
>>>> frames were completely blurred. Now the text withing gnome-terminal is
>>>> also blurred/smudged)
>>>>
>>>
>>> I should add that in this case rendering is completely messed up in
>>> _both_ 3.3.x and 3.4. But the stream command failures in 3.4 go away
>>> upon upgrading to the latext xf86-video-ati git HEAD.
>>
>> Ok. All is fixed in kernel v3.4 if I additionally upgrade Mesa to the
>> latest git. Jerome, many thanks for your help on this!
>>
>> So to summarize, the 3.4 breakage in Ubuntu 11.04 (and probably other
>> distributions released around the same time) is fixed by:
>>
>> a) Upgrade libdrm to latest GIT as of this writing (93a5117d5)
>> b) Upgrade xf86-video-ati to latest GIT as of this writing (5888371)
>> c) Upgrade mesa to latest GIT as of this writing (529476b)
>>
>> Now kernel 3.4 works on my laptop.
>>
>> Thanks!
>>
>> BGM.
>
> Well i still need to find out what's wrong with 6.14.0, what your
> screen resolution ?
1366 x 768. I am happy to run whatever tests you would like to debug.
--
Brian Gitonga Marete
Toshnix Systems - http://toshnix.com
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Regression] [Radeon] Stream command failures and render problems in Evergreen (Radeon HD 5600) in kernel 3.4
2012-06-08 19:56 ` Jerome Glisse
2012-06-08 19:56 ` Jerome Glisse
@ 2012-06-08 20:28 ` Brian Gitonga Marete
2012-06-08 20:43 ` Jerome Glisse
1 sibling, 1 reply; 30+ messages in thread
From: Brian Gitonga Marete @ 2012-06-08 20:28 UTC (permalink / raw)
To: Jerome Glisse; +Cc: LKML, David Airlie, Alex Deucher, Jerome Glisse
On Fri, Jun 8, 2012 at 10:56 PM, Jerome Glisse <j.glisse@gmail.com> wrote:
> On Fri, Jun 8, 2012 at 6:13 AM, Brian Gitonga Marete <marete@toshnix.com> wrote:
>> On Fri, Jun 8, 2012 at 12:56 AM, Brian Gitonga Marete
>> <marete@toshnix.com> wrote:
>>> On Fri, Jun 8, 2012 at 12:44 AM, Brian Gitonga Marete
>>> <marete@toshnix.com> wrote:
>>>> On Thu, Jun 7, 2012 at 11:20 PM, Jerome Glisse <j.glisse@gmail.com> wrote:
>>>>> On Thu, Jun 7, 2012 at 3:59 PM, Brian Gitonga Marete <marete@toshnix.com> wrote:
>>>>>> On Thu, Jun 7, 2012 at 5:25 PM, Jerome Glisse <j.glisse@gmail.com> wrote:
>>>>>>>
>>>>>>> Update your libdrm to libdrm from git should fix your issue.
>>>>>>
>>>>>> Hello Jerome,
>>>>>>
>>>>>> Thanks for looking into this.
>>>>>>
>>>>>> I am afraid that even with the very latest libdrm (git 93a5117d), the
>>>>>> rendering is still broken.
>>>>>>
>>>>>> What else should I try? I would revert the patch that git-bisect
>>>>>> fingered (your patch, git 285484e2d, Linux mainline) but there are
>>>>>> merge problems when I try to do that, which I have not yet looked
>>>>>> into. Perhaps you can see if you can help me revert that patch so that
>>>>>> we can see if the problem then goes away?
>>>>>>
>>>>> What happen if you upgrade to xf86-video-ati from git ?
>>>>
>>>> Hello Jerome,
>>>>
>>>> Once again, thanks a lot for your help.
>>>>
>>>> Some progress but also a setback: Upgrading to the latest
>>>> xf86-video-ati git gets rid of the stream command failures - No more
>>>> error messages in dmesg(8). But then, now, rendering is completely
>>>> messed up. Previously, it was mostly the window boundaries that were
>>>> blurred/messed but now also entire windows and text so that you can't
>>>> read anything from the desktop. (For example, the previous render
>>>> problems would still allow me to use gnome-terminal even though its
>>>> frames were completely blurred. Now the text withing gnome-terminal is
>>>> also blurred/smudged)
>>>>
>>>
>>> I should add that in this case rendering is completely messed up in
>>> _both_ 3.3.x and 3.4. But the stream command failures in 3.4 go away
>>> upon upgrading to the latext xf86-video-ati git HEAD.
>>
>> Ok. All is fixed in kernel v3.4 if I additionally upgrade Mesa to the
>> latest git. Jerome, many thanks for your help on this!
>>
>> So to summarize, the 3.4 breakage in Ubuntu 11.04 (and probably other
>> distributions released around the same time) is fixed by:
>>
>> a) Upgrade libdrm to latest GIT as of this writing (93a5117d5)
>> b) Upgrade xf86-video-ati to latest GIT as of this writing (5888371)
>> c) Upgrade mesa to latest GIT as of this writing (529476b)
>>
>> Now kernel 3.4 works on my laptop.
>>
>> Thanks!
>>
>> BGM.
>
> Brian can you please test patch below on 6.14.0 ddx and old mesa (ie
> revert to ubuntu mesa & ddx) and report if it fix your issue. Thanks
>
> http://people.freedesktop.org/~glisse/0001-drm-radeon-fix-tiling-and-command-stream-checking-on.patch
>
OK. Will test and report back. Thanks!
--
Brian Gitonga Marete
Toshnix Systems - http://toshnix.com
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Regression] [Radeon] Stream command failures and render problems in Evergreen (Radeon HD 5600) in kernel 3.4
2012-06-08 20:28 ` Brian Gitonga Marete
@ 2012-06-08 20:43 ` Jerome Glisse
2012-06-09 16:14 ` Brian Gitonga Marete
0 siblings, 1 reply; 30+ messages in thread
From: Jerome Glisse @ 2012-06-08 20:43 UTC (permalink / raw)
To: Brian Gitonga Marete; +Cc: LKML, David Airlie, Alex Deucher, Jerome Glisse
On Fri, Jun 8, 2012 at 4:28 PM, Brian Gitonga Marete <marete@toshnix.com> wrote:
> On Fri, Jun 8, 2012 at 10:56 PM, Jerome Glisse <j.glisse@gmail.com> wrote:
>> On Fri, Jun 8, 2012 at 6:13 AM, Brian Gitonga Marete <marete@toshnix.com> wrote:
>>> On Fri, Jun 8, 2012 at 12:56 AM, Brian Gitonga Marete
>>> <marete@toshnix.com> wrote:
>>>> On Fri, Jun 8, 2012 at 12:44 AM, Brian Gitonga Marete
>>>> <marete@toshnix.com> wrote:
>>>>> On Thu, Jun 7, 2012 at 11:20 PM, Jerome Glisse <j.glisse@gmail.com> wrote:
>>>>>> On Thu, Jun 7, 2012 at 3:59 PM, Brian Gitonga Marete <marete@toshnix.com> wrote:
>>>>>>> On Thu, Jun 7, 2012 at 5:25 PM, Jerome Glisse <j.glisse@gmail.com> wrote:
>>>>>>>>
>>>>>>>> Update your libdrm to libdrm from git should fix your issue.
>>>>>>>
>>>>>>> Hello Jerome,
>>>>>>>
>>>>>>> Thanks for looking into this.
>>>>>>>
>>>>>>> I am afraid that even with the very latest libdrm (git 93a5117d), the
>>>>>>> rendering is still broken.
>>>>>>>
>>>>>>> What else should I try? I would revert the patch that git-bisect
>>>>>>> fingered (your patch, git 285484e2d, Linux mainline) but there are
>>>>>>> merge problems when I try to do that, which I have not yet looked
>>>>>>> into. Perhaps you can see if you can help me revert that patch so that
>>>>>>> we can see if the problem then goes away?
>>>>>>>
>>>>>> What happen if you upgrade to xf86-video-ati from git ?
>>>>>
>>>>> Hello Jerome,
>>>>>
>>>>> Once again, thanks a lot for your help.
>>>>>
>>>>> Some progress but also a setback: Upgrading to the latest
>>>>> xf86-video-ati git gets rid of the stream command failures - No more
>>>>> error messages in dmesg(8). But then, now, rendering is completely
>>>>> messed up. Previously, it was mostly the window boundaries that were
>>>>> blurred/messed but now also entire windows and text so that you can't
>>>>> read anything from the desktop. (For example, the previous render
>>>>> problems would still allow me to use gnome-terminal even though its
>>>>> frames were completely blurred. Now the text withing gnome-terminal is
>>>>> also blurred/smudged)
>>>>>
>>>>
>>>> I should add that in this case rendering is completely messed up in
>>>> _both_ 3.3.x and 3.4. But the stream command failures in 3.4 go away
>>>> upon upgrading to the latext xf86-video-ati git HEAD.
>>>
>>> Ok. All is fixed in kernel v3.4 if I additionally upgrade Mesa to the
>>> latest git. Jerome, many thanks for your help on this!
>>>
>>> So to summarize, the 3.4 breakage in Ubuntu 11.04 (and probably other
>>> distributions released around the same time) is fixed by:
>>>
>>> a) Upgrade libdrm to latest GIT as of this writing (93a5117d5)
>>> b) Upgrade xf86-video-ati to latest GIT as of this writing (5888371)
>>> c) Upgrade mesa to latest GIT as of this writing (529476b)
>>>
>>> Now kernel 3.4 works on my laptop.
>>>
>>> Thanks!
>>>
>>> BGM.
>>
>> Brian can you please test patch below on 6.14.0 ddx and old mesa (ie
>> revert to ubuntu mesa & ddx) and report if it fix your issue. Thanks
>>
>> http://people.freedesktop.org/~glisse/0001-drm-radeon-fix-tiling-and-command-stream-checking-on.patch
>>
> OK. Will test and report back. Thanks!
>
> --
> Brian Gitonga Marete
> Toshnix Systems - http://toshnix.com
I uploaded a v3 version same url, the v2 won't work for you. v3 should
work (at least according to my local testing with same gpu as you and
same use case)
Cheers,
Jerome
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Regression] [Radeon] Stream command failures and render problems in Evergreen (Radeon HD 5600) in kernel 3.4
2012-06-08 20:43 ` Jerome Glisse
@ 2012-06-09 16:14 ` Brian Gitonga Marete
2012-06-09 16:29 ` Dave Airlie
0 siblings, 1 reply; 30+ messages in thread
From: Brian Gitonga Marete @ 2012-06-09 16:14 UTC (permalink / raw)
To: Jerome Glisse; +Cc: LKML, David Airlie, Alex Deucher, Jerome Glisse
On Fri, Jun 8, 2012 at 11:43 PM, Jerome Glisse <j.glisse@gmail.com> wrote:
> On Fri, Jun 8, 2012 at 4:28 PM, Brian Gitonga Marete <marete@toshnix.com> wrote:
>> On Fri, Jun 8, 2012 at 10:56 PM, Jerome Glisse <j.glisse@gmail.com> wrote:
>>> On Fri, Jun 8, 2012 at 6:13 AM, Brian Gitonga Marete <marete@toshnix.com> wrote:
>>>> On Fri, Jun 8, 2012 at 12:56 AM, Brian Gitonga Marete
>>>> <marete@toshnix.com> wrote:
>>>>> On Fri, Jun 8, 2012 at 12:44 AM, Brian Gitonga Marete
>>>>> <marete@toshnix.com> wrote:
>>>>>> On Thu, Jun 7, 2012 at 11:20 PM, Jerome Glisse <j.glisse@gmail.com> wrote:
>>>>>>> On Thu, Jun 7, 2012 at 3:59 PM, Brian Gitonga Marete <marete@toshnix.com> wrote:
>>>>>>>> On Thu, Jun 7, 2012 at 5:25 PM, Jerome Glisse <j.glisse@gmail.com> wrote:
>>>>>>>>>
>>>>>>>>> Update your libdrm to libdrm from git should fix your issue.
>>>>>>>>
>>>>>>>> Hello Jerome,
>>>>>>>>
>>>>>>>> Thanks for looking into this.
>>>>>>>>
>>>>>>>> I am afraid that even with the very latest libdrm (git 93a5117d), the
>>>>>>>> rendering is still broken.
>>>>>>>>
>>>>>>>> What else should I try? I would revert the patch that git-bisect
>>>>>>>> fingered (your patch, git 285484e2d, Linux mainline) but there are
>>>>>>>> merge problems when I try to do that, which I have not yet looked
>>>>>>>> into. Perhaps you can see if you can help me revert that patch so that
>>>>>>>> we can see if the problem then goes away?
>>>>>>>>
>>>>>>> What happen if you upgrade to xf86-video-ati from git ?
>>>>>>
>>>>>> Hello Jerome,
>>>>>>
>>>>>> Once again, thanks a lot for your help.
>>>>>>
>>>>>> Some progress but also a setback: Upgrading to the latest
>>>>>> xf86-video-ati git gets rid of the stream command failures - No more
>>>>>> error messages in dmesg(8). But then, now, rendering is completely
>>>>>> messed up. Previously, it was mostly the window boundaries that were
>>>>>> blurred/messed but now also entire windows and text so that you can't
>>>>>> read anything from the desktop. (For example, the previous render
>>>>>> problems would still allow me to use gnome-terminal even though its
>>>>>> frames were completely blurred. Now the text withing gnome-terminal is
>>>>>> also blurred/smudged)
>>>>>>
>>>>>
>>>>> I should add that in this case rendering is completely messed up in
>>>>> _both_ 3.3.x and 3.4. But the stream command failures in 3.4 go away
>>>>> upon upgrading to the latext xf86-video-ati git HEAD.
>>>>
>>>> Ok. All is fixed in kernel v3.4 if I additionally upgrade Mesa to the
>>>> latest git. Jerome, many thanks for your help on this!
>>>>
>>>> So to summarize, the 3.4 breakage in Ubuntu 11.04 (and probably other
>>>> distributions released around the same time) is fixed by:
>>>>
>>>> a) Upgrade libdrm to latest GIT as of this writing (93a5117d5)
>>>> b) Upgrade xf86-video-ati to latest GIT as of this writing (5888371)
>>>> c) Upgrade mesa to latest GIT as of this writing (529476b)
>>>>
>>>> Now kernel 3.4 works on my laptop.
>>>>
>>>> Thanks!
>>>>
>>>> BGM.
>>>
>>> Brian can you please test patch below on 6.14.0 ddx and old mesa (ie
>>> revert to ubuntu mesa & ddx) and report if it fix your issue. Thanks
>>>
>>> http://people.freedesktop.org/~glisse/0001-drm-radeon-fix-tiling-and-command-stream-checking-on.patch
>>>
>> OK. Will test and report back. Thanks!
>>
>> --
>> Brian Gitonga Marete
>> Toshnix Systems - http://toshnix.com
>
> I uploaded a v3 version same url, the v2 won't work for you. v3 should
> work (at least according to my local testing with same gpu as you and
> same use case)
OK. I actually hadn't gotten around to testing yet. Will do so later
today. About libdrm, should I test against git or the Ubuntu version?
--
Brian Gitonga Marete
Toshnix Systems - http://toshnix.com
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Regression] [Radeon] Stream command failures and render problems in Evergreen (Radeon HD 5600) in kernel 3.4
2012-06-09 16:14 ` Brian Gitonga Marete
@ 2012-06-09 16:29 ` Dave Airlie
2012-06-09 16:33 ` Brian Gitonga Marete
0 siblings, 1 reply; 30+ messages in thread
From: Dave Airlie @ 2012-06-09 16:29 UTC (permalink / raw)
To: Brian Gitonga Marete
Cc: Jerome Glisse, LKML, David Airlie, Alex Deucher, Jerome Glisse
>
> OK. I actually hadn't gotten around to testing yet. Will do so later
> today. About libdrm, should I test against git or the Ubuntu version?
The Ubuntu version please.
Dave.
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Regression] [Radeon] Stream command failures and render problems in Evergreen (Radeon HD 5600) in kernel 3.4
2012-06-09 16:29 ` Dave Airlie
@ 2012-06-09 16:33 ` Brian Gitonga Marete
2012-06-10 11:24 ` Brian Gitonga Marete
0 siblings, 1 reply; 30+ messages in thread
From: Brian Gitonga Marete @ 2012-06-09 16:33 UTC (permalink / raw)
To: Dave Airlie
Cc: Jerome Glisse, LKML, David Airlie, Alex Deucher, Jerome Glisse
On Sat, Jun 9, 2012 at 7:29 PM, Dave Airlie <airlied@gmail.com> wrote:
>>
>> OK. I actually hadn't gotten around to testing yet. Will do so later
>> today. About libdrm, should I test against git or the Ubuntu version?
>
> The Ubuntu version please.
OK.Will report results in a couple of hours :)
--
Brian Gitonga Marete
Toshnix Systems - http://toshnix.com
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Regression] [Radeon] Stream command failures and render problems in Evergreen (Radeon HD 5600) in kernel 3.4
2012-06-09 16:33 ` Brian Gitonga Marete
@ 2012-06-10 11:24 ` Brian Gitonga Marete
2012-06-10 14:28 ` Dave Airlie
0 siblings, 1 reply; 30+ messages in thread
From: Brian Gitonga Marete @ 2012-06-10 11:24 UTC (permalink / raw)
To: Dave Airlie
Cc: Jerome Glisse, LKML, David Airlie, Alex Deucher, Jerome Glisse
On Sat, Jun 9, 2012 at 7:33 PM, Brian Gitonga Marete <marete@toshnix.com> wrote:
> On Sat, Jun 9, 2012 at 7:29 PM, Dave Airlie <airlied@gmail.com> wrote:
>>>
>>> OK. I actually hadn't gotten around to testing yet. Will do so later
>>> today. About libdrm, should I test against git or the Ubuntu version?
>>
>> The Ubuntu version please.
>
> OK.Will report results in a couple of hours :)
Hello. Got around to this after some delay and after applying v3 of
them patch to 3.4, where it applied cleanly, I get this during build:
drivers/gpu/drm/radeon/evergreen_cs.c: In function
‘evergreen_cs_track_validate_cb’:
drivers/gpu/drm/radeon/evergreen_cs.c:447:28: error: request for
member ‘ptr’ in something not a structure or union
--
Brian Gitonga Marete
Toshnix Systems - http://toshnix.com
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Regression] [Radeon] Stream command failures and render problems in Evergreen (Radeon HD 5600) in kernel 3.4
2012-06-10 11:24 ` Brian Gitonga Marete
@ 2012-06-10 14:28 ` Dave Airlie
2012-06-10 18:28 ` Brian Gitonga Marete
0 siblings, 1 reply; 30+ messages in thread
From: Dave Airlie @ 2012-06-10 14:28 UTC (permalink / raw)
To: Brian Gitonga Marete
Cc: Jerome Glisse, LKML, David Airlie, Alex Deucher, Jerome Glisse
On Sun, Jun 10, 2012 at 12:24 PM, Brian Gitonga Marete
<marete@toshnix.com> wrote:
> On Sat, Jun 9, 2012 at 7:33 PM, Brian Gitonga Marete <marete@toshnix.com> wrote:
>> On Sat, Jun 9, 2012 at 7:29 PM, Dave Airlie <airlied@gmail.com> wrote:
>>>>
>>>> OK. I actually hadn't gotten around to testing yet. Will do so later
>>>> today. About libdrm, should I test against git or the Ubuntu version?
>>>
>>> The Ubuntu version please.
>>
>> OK.Will report results in a couple of hours :)
>
> Hello. Got around to this after some delay and after applying v3 of
> them patch to 3.4, where it applied cleanly, I get this during build:
>
> drivers/gpu/drm/radeon/evergreen_cs.c: In function
> ‘evergreen_cs_track_validate_cb’:
> drivers/gpu/drm/radeon/evergreen_cs.c:447:28: error: request for
> member ‘ptr’ in something not a structure or union
Can you change the -> to a . on that line
Dave.
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Regression] [Radeon] Stream command failures and render problems in Evergreen (Radeon HD 5600) in kernel 3.4
2012-06-10 14:28 ` Dave Airlie
@ 2012-06-10 18:28 ` Brian Gitonga Marete
2012-06-11 21:57 ` Brian Gitonga Marete
0 siblings, 1 reply; 30+ messages in thread
From: Brian Gitonga Marete @ 2012-06-10 18:28 UTC (permalink / raw)
To: Dave Airlie
Cc: Jerome Glisse, LKML, David Airlie, Alex Deucher, Jerome Glisse
On Sun, Jun 10, 2012 at 5:28 PM, Dave Airlie <airlied@gmail.com> wrote:
> On Sun, Jun 10, 2012 at 12:24 PM, Brian Gitonga Marete
> <marete@toshnix.com> wrote:
>> On Sat, Jun 9, 2012 at 7:33 PM, Brian Gitonga Marete <marete@toshnix.com> wrote:
>>> On Sat, Jun 9, 2012 at 7:29 PM, Dave Airlie <airlied@gmail.com> wrote:
>>>>>
>>>>> OK. I actually hadn't gotten around to testing yet. Will do so later
>>>>> today. About libdrm, should I test against git or the Ubuntu version?
>>>>
>>>> The Ubuntu version please.
>>>
>>> OK.Will report results in a couple of hours :)
>>
>> Hello. Got around to this after some delay and after applying v3 of
>> them patch to 3.4, where it applied cleanly, I get this during build:
>>
>> drivers/gpu/drm/radeon/evergreen_cs.c: In function
>> ‘evergreen_cs_track_validate_cb’:
>> drivers/gpu/drm/radeon/evergreen_cs.c:447:28: error: request for
>> member ‘ptr’ in something not a structure or union
>
> Can you change the -> to a . on that line
Actually, the other way around :) Compilation has now passed that
point and will report on test results.
--
Brian Gitonga Marete
Toshnix Systems - http://toshnix.com
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Regression] [Radeon] Stream command failures and render problems in Evergreen (Radeon HD 5600) in kernel 3.4
2012-06-10 18:28 ` Brian Gitonga Marete
@ 2012-06-11 21:57 ` Brian Gitonga Marete
0 siblings, 0 replies; 30+ messages in thread
From: Brian Gitonga Marete @ 2012-06-11 21:57 UTC (permalink / raw)
To: Dave Airlie
Cc: Jerome Glisse, LKML, David Airlie, Alex Deucher, Jerome Glisse
On Sun, Jun 10, 2012 at 9:28 PM, Brian Gitonga Marete
<marete@toshnix.com> wrote:
> On Sun, Jun 10, 2012 at 5:28 PM, Dave Airlie <airlied@gmail.com> wrote:
>> On Sun, Jun 10, 2012 at 12:24 PM, Brian Gitonga Marete
>> <marete@toshnix.com> wrote:
>>> On Sat, Jun 9, 2012 at 7:33 PM, Brian Gitonga Marete <marete@toshnix.com> wrote:
>>>> On Sat, Jun 9, 2012 at 7:29 PM, Dave Airlie <airlied@gmail.com> wrote:
>>>>>>
>>>>>> OK. I actually hadn't gotten around to testing yet. Will do so later
>>>>>> today. About libdrm, should I test against git or the Ubuntu version?
>>>>>
>>>>> The Ubuntu version please.
>>>>
>>>> OK.Will report results in a couple of hours :)
>>>
>>> Hello. Got around to this after some delay and after applying v3 of
>>> them patch to 3.4, where it applied cleanly, I get this during build:
>>>
>>> drivers/gpu/drm/radeon/evergreen_cs.c: In function
>>> ‘evergreen_cs_track_validate_cb’:
>>> drivers/gpu/drm/radeon/evergreen_cs.c:447:28: error: request for
>>> member ‘ptr’ in something not a structure or union
>>
>> Can you change the -> to a . on that line
>
> Actually, the other way around :) Compilation has now passed that
> point and will report on test results.
>
>
> --
> Brian Gitonga Marete
> Toshnix Systems - http://toshnix.com
Hello. I am happy to report that v3 of Jerome's patch works and fixes
the regressions. I have tested 3.4 with the patch against Ubuntu's
stock drm, radeon and mesa-glx packages.
A quick reminder that the patch needs the small fix detailed in my
exchange with David above.
Thanks very much to Jerome and David!
--
Brian Gitonga Marete
Toshnix Systems - http://toshnix.com
^ permalink raw reply [flat|nested] 30+ messages in thread
end of thread, other threads:[~2012-06-11 21:57 UTC | newest]
Thread overview: 30+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-06-03 17:26 [Regression] [Radeon] Stream command failures and render problems in Evergreen (Radeon HD 5600) in kernel 3.4 Brian Gitonga Marete
2012-06-03 17:34 ` Brian Gitonga Marete
2012-06-06 22:59 ` Brian Gitonga Marete
2012-06-06 23:01 ` Brian Gitonga Marete
2012-06-07 14:25 ` Jerome Glisse
2012-06-07 14:35 ` Brian Gitonga Marete
2012-06-07 15:35 ` Roland Dreier
2012-06-07 16:22 ` Jerome Glisse
2012-06-07 19:59 ` Brian Gitonga Marete
2012-06-07 20:20 ` Jerome Glisse
2012-06-07 20:22 ` Brian Gitonga Marete
2012-06-07 20:23 ` Jerome Glisse
2012-06-07 20:26 ` Brian Gitonga Marete
2012-06-07 20:29 ` Brian Gitonga Marete
2012-06-07 21:44 ` Brian Gitonga Marete
2012-06-07 21:56 ` Brian Gitonga Marete
2012-06-08 10:13 ` Brian Gitonga Marete
2012-06-08 14:51 ` Jerome Glisse
2012-06-08 20:26 ` Brian Gitonga Marete
2012-06-08 19:56 ` Jerome Glisse
2012-06-08 19:56 ` Jerome Glisse
2012-06-08 20:28 ` Brian Gitonga Marete
2012-06-08 20:43 ` Jerome Glisse
2012-06-09 16:14 ` Brian Gitonga Marete
2012-06-09 16:29 ` Dave Airlie
2012-06-09 16:33 ` Brian Gitonga Marete
2012-06-10 11:24 ` Brian Gitonga Marete
2012-06-10 14:28 ` Dave Airlie
2012-06-10 18:28 ` Brian Gitonga Marete
2012-06-11 21:57 ` Brian Gitonga Marete
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).