* [GIT PULL] final round of SCSI updates for the 5.15+ merge window @ 2021-11-12 13:43 James Bottomley 2021-11-12 20:34 ` Linus Torvalds 2021-11-12 20:42 ` pr-tracker-bot 0 siblings, 2 replies; 4+ messages in thread From: James Bottomley @ 2021-11-12 13:43 UTC (permalink / raw) To: Andrew Morton, Linus Torvalds; +Cc: linux-scsi, linux-kernel This series is all the stragglers that didn't quite make the first merge window pull. It's mostly minor updates and bug fixes of merge window code but it also has two driver updates: ufs and qla2xxx. James The patch is available here: git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-misc The short changelog is: Adrian Hunter (1): scsi: ufs: ufs-pci: Force a full restore after suspend-to-disk Alexey Dobriyan (1): scsi: sr: Remove duplicate assignment Andrea Parri (Microsoft) (1): scsi: storvsc: Fix validation for unsolicited incoming packets Avri Altman (2): scsi: ufs: ufshpb: Properly handle max-single-cmd scsi: ufs: ufshpb: Remove HPB2.0 flows Bart Van Assche (10): scsi: ufs: core: Micro-optimize ufshcd_map_sg() scsi: ufs: core: Add a compile-time structure size check scsi: ufs: core: Remove three superfluous casts scsi: ufs: core: Add debugfs attributes for triggering the UFS EH scsi: ufs: core: Make it easier to add new debugfs attributes scsi: ufs: core: Export ufshcd_schedule_eh_work() scsi: ufs: core: Log error handler activity scsi: ufs: core: Improve static type checking scsi: ufs: core: Improve source code comments scsi: ufs: Revert "Retry aborted SCSI commands instead of completing these successfully" Brian King (1): scsi: ibmvfc: Fix up duplicate response detection Chanho Park (12): scsi: ufs: ufs-exynos: Introduce ExynosAuto v9 virtual host scsi: ufs: ufs-exynos: Multi-host configuration for ExynosAuto v9 scsi: ufs: ufs-exynos: Support ExynosAuto v9 UFS scsi: ufs: ufs-exynos: Add pre/post_hce_enable drv callbacks scsi: ufs: ufs-exynos: Factor out priv data init scsi: ufs: ufs-exynos: Add EXYNOS_UFS_OPT_SKIP_CONFIG_PHY_ATTR option scsi: ufs: ufs-exynos: Support custom version of ufs_hba_variant_ops scsi: ufs: ufs-exynos: Add setup_clocks callback scsi: ufs: ufs-exynos: Add refclkout_stop control scsi: ufs: ufs-exynos: Simplify drv_data retrieval scsi: ufs: ufs-exynos: Change pclk available max value scsi: ufs: ufs-exynos: Correct timeout value setting registers Christophe JAILLET (1): scsi: elx: Use 'bitmap_zalloc()' when applicable Dexuan Cui (1): scsi: core: Fix shost->cmd_per_lun calculation in scsi_add_host_with_dma() Dmitry Bogdanov (2): scsi: target: core: Remove from tmr_list during LUN unlink scsi: qla2xxx: Fix unmap of already freed sgl Ewan D. Milne (1): scsi: core: Avoid leaving shost->last_reset with stale value if EH does not run George Kennedy (1): scsi: scsi_debug: Don't call kcalloc() if size arg is zero Jackie Liu (1): scsi: bsg: Fix errno when scsi_bsg_register_queue() fails Joy Gu (1): scsi: qla2xxx: Fix a memory leak in an error path of qla2x00_process_els() Martin K. Petersen (1): scsi: mpt3sas: Fix reference tag handling for WRITE_INSERT Mike Christie (1): scsi: iscsi: Fix set_param() handling Miles Chen (1): scsi: sd: Fix crashes in sd_resume_runtime() Ming Lei (1): scsi: core: Put LLD module refcnt after SCSI device is released Nilesh Javali (1): scsi: qla2xxx: Update version to 10.02.07.200-k Quinn Tran (12): scsi: qla2xxx: edif: Fix EDIF bsg scsi: qla2xxx: edif: Fix inconsistent check of db_flags scsi: qla2xxx: edif: Increase ELS payload scsi: qla2xxx: edif: Reduce connection thrash scsi: qla2xxx: edif: Tweak trace message scsi: qla2xxx: edif: Replace list_for_each_safe with list_for_each_entry_safe scsi: qla2xxx: edif: Flush stale events and msgs on session down scsi: qla2xxx: edif: Fix app start delay scsi: qla2xxx: edif: Fix app start fail scsi: qla2xxx: Turn off target reset during issue_lip scsi: qla2xxx: Fix gnl list corruption scsi: qla2xxx: Relogin during fabric disturbance Sreekanth Reddy (1): scsi: mpi3mr: Fix duplicate device entries when scanning through sysfs Steffen Maier (1): scsi: core: Fix early registration of sysfs attributes for scsi_device Tadeusz Struk (2): scsi: core: Remove command size deduction from scsi_setup_scsi_cmnd() scsi: scsi_ioctl: Validate command size Zheyu Ma (1): scsi: qla2xxx: Return -ENOMEM if kzalloc() fails jongmin jeong (2): scsi: ufs: Add quirk to enable host controller without PH configuration scsi: ufs: Add quirk to handle broken UIC command ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [GIT PULL] final round of SCSI updates for the 5.15+ merge window 2021-11-12 13:43 [GIT PULL] final round of SCSI updates for the 5.15+ merge window James Bottomley @ 2021-11-12 20:34 ` Linus Torvalds 2021-11-12 22:03 ` James Bottomley 2021-11-12 20:42 ` pr-tracker-bot 1 sibling, 1 reply; 4+ messages in thread From: Linus Torvalds @ 2021-11-12 20:34 UTC (permalink / raw) To: James Bottomley; +Cc: Andrew Morton, linux-scsi, linux-kernel On Fri, Nov 12, 2021 at 5:43 AM James Bottomley <James.Bottomley@hansenpartnership.com> wrote: > > This series is all the stragglers that didn't quite make the first > merge window pull. It's mostly minor updates and bug fixes of merge > window code but it also has two driver updates: ufs and qla2xxx. Hmm? No diffstat? I suspect it's because there's a merge in there, and thus multiple merge base commits, and the autogenerated diffstat ends up being worthless. In that situation, the nice thing to do is to at least tell me why there's no diffstat, but optimally you can do a temporary throw-away merge in a temporary branch just to get the diffstat. And yes, "git request-pull" could do that, automating this all and reporting any conflicts at the same time. But git historically did *not* do that just because it requires a working tree and can be messy, and because the "just do the diff from the merge base" works fine for maintainers that don't do merges themselves, and so the only maintainers that can hit this issue are the maintainers that also should be able to do that temporary merge thing on their own. Anyway, I don't require that temporary merge, but I _do_ really want to get notified of "look, I did the diffstat, and it was useless garbage, so I'm not including it here". Because as-is, this just looks like an incomplete pull request. I've done the pull, verified the shortlog, and checked that the (proper) diffstat all looks sane. But I am writing this email just to say "you could have done so much better". Linus ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [GIT PULL] final round of SCSI updates for the 5.15+ merge window 2021-11-12 20:34 ` Linus Torvalds @ 2021-11-12 22:03 ` James Bottomley 0 siblings, 0 replies; 4+ messages in thread From: James Bottomley @ 2021-11-12 22:03 UTC (permalink / raw) To: Linus Torvalds; +Cc: Andrew Morton, linux-scsi, linux-kernel On Fri, 2021-11-12 at 12:34 -0800, Linus Torvalds wrote: > On Fri, Nov 12, 2021 at 5:43 AM James Bottomley > <James.Bottomley@hansenpartnership.com> wrote: > > This series is all the stragglers that didn't quite make the first > > merge window pull. It's mostly minor updates and bug fixes of > > merge window code but it also has two driver updates: ufs and > > qla2xxx. > > Hmm? No diffstat? > > I suspect it's because there's a merge in there, and thus multiple > merge base commits, and the autogenerated diffstat ends up being > worthless. Um, no, it's because I forgot, sorry. > In that situation, the nice thing to do is to at least tell me why > there's no diffstat, but optimally you can do a temporary throw-away > merge in a temporary branch just to get the diffstat. > > And yes, "git request-pull" could do that, automating this all and > reporting any conflicts at the same time. > > But git historically did *not* do that just because it requires a > working tree and can be messy, and because the "just do the diff from > the merge base" works fine for maintainers that don't do merges > themselves, and so the only maintainers that can hit this issue are > the maintainers that also should be able to do that temporary merge > thing on their own. > > Anyway, I don't require that temporary merge, but I _do_ really want > to get notified of "look, I did the diffstat, and it was useless > garbage, so I'm not including it here". > > Because as-is, this just looks like an incomplete pull request. > > I've done the pull, verified the shortlog, and checked that the > (proper) diffstat all looks sane. But I am writing this email just to > say "you could have done so much better". Will do next time, sorry. James ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [GIT PULL] final round of SCSI updates for the 5.15+ merge window 2021-11-12 13:43 [GIT PULL] final round of SCSI updates for the 5.15+ merge window James Bottomley 2021-11-12 20:34 ` Linus Torvalds @ 2021-11-12 20:42 ` pr-tracker-bot 1 sibling, 0 replies; 4+ messages in thread From: pr-tracker-bot @ 2021-11-12 20:42 UTC (permalink / raw) To: James Bottomley; +Cc: Andrew Morton, Linus Torvalds, linux-scsi, linux-kernel The pull request you sent on Fri, 12 Nov 2021 08:43:14 -0500: > git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-misc has been merged into torvalds/linux.git: https://git.kernel.org/torvalds/c/6cbcc7ab2147d721700029a78558dc0ea4207153 Thank you! -- Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/prtracker.html ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-11-12 22:03 UTC | newest] Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-11-12 13:43 [GIT PULL] final round of SCSI updates for the 5.15+ merge window James Bottomley 2021-11-12 20:34 ` Linus Torvalds 2021-11-12 22:03 ` James Bottomley 2021-11-12 20:42 ` pr-tracker-bot
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).