* [PATCH platform-next v2 01/10] platform/x86: mlx-platform: Cosmetic changes
2020-01-12 12:18 [PATCH platform-next v2 00/10] platform/x86: Mellanox new system classes and new features Vadim Pasternak
@ 2020-01-12 12:18 ` Vadim Pasternak
2020-01-12 12:18 ` [PATCH platform-next v2 02/10] Documentation/ABI: Fix documentation inconsistency for mlxreg-io sysfs interfaces Vadim Pasternak
` (8 subsequent siblings)
9 siblings, 0 replies; 13+ messages in thread
From: Vadim Pasternak @ 2020-01-12 12:18 UTC (permalink / raw)
To: andy, dvhart; +Cc: platform-driver-x86, linux-kernel, Vadim Pasternak
Remove redundant semicolons at the end of few functions.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
---
v1-v2:
Comments pointed out by Andy:
- Move this patch to be the first in series.
---
drivers/platform/x86/mlx-platform.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/platform/x86/mlx-platform.c b/drivers/platform/x86/mlx-platform.c
index 8fe51e43f1bc..565a67a65554 100644
--- a/drivers/platform/x86/mlx-platform.c
+++ b/drivers/platform/x86/mlx-platform.c
@@ -1834,7 +1834,7 @@ static int __init mlxplat_dmi_default_matched(const struct dmi_system_id *dmi)
mlxplat_wd_data[0] = &mlxplat_mlxcpld_wd_set_type1[0];
return 1;
-};
+}
static int __init mlxplat_dmi_msn21xx_matched(const struct dmi_system_id *dmi)
{
@@ -1853,7 +1853,7 @@ static int __init mlxplat_dmi_msn21xx_matched(const struct dmi_system_id *dmi)
mlxplat_wd_data[0] = &mlxplat_mlxcpld_wd_set_type1[0];
return 1;
-};
+}
static int __init mlxplat_dmi_msn274x_matched(const struct dmi_system_id *dmi)
{
@@ -1872,7 +1872,7 @@ static int __init mlxplat_dmi_msn274x_matched(const struct dmi_system_id *dmi)
mlxplat_wd_data[0] = &mlxplat_mlxcpld_wd_set_type1[0];
return 1;
-};
+}
static int __init mlxplat_dmi_msn201x_matched(const struct dmi_system_id *dmi)
{
@@ -1891,7 +1891,7 @@ static int __init mlxplat_dmi_msn201x_matched(const struct dmi_system_id *dmi)
mlxplat_wd_data[0] = &mlxplat_mlxcpld_wd_set_type1[0];
return 1;
-};
+}
static int __init mlxplat_dmi_qmb7xx_matched(const struct dmi_system_id *dmi)
{
@@ -1914,7 +1914,7 @@ static int __init mlxplat_dmi_qmb7xx_matched(const struct dmi_system_id *dmi)
mlxplat_regmap_config = &mlxplat_mlxcpld_regmap_config_ng;
return 1;
-};
+}
static const struct dmi_system_id mlxplat_dmi_table[] __initconst = {
{
--
2.11.0
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH platform-next v2 02/10] Documentation/ABI: Fix documentation inconsistency for mlxreg-io sysfs interfaces
2020-01-12 12:18 [PATCH platform-next v2 00/10] platform/x86: Mellanox new system classes and new features Vadim Pasternak
2020-01-12 12:18 ` [PATCH platform-next v2 01/10] platform/x86: mlx-platform: Cosmetic changes Vadim Pasternak
@ 2020-01-12 12:18 ` Vadim Pasternak
2020-01-12 12:18 ` [PATCH platform-next v2 03/10] Documentation/ABI: Add missed attribute " Vadim Pasternak
` (7 subsequent siblings)
9 siblings, 0 replies; 13+ messages in thread
From: Vadim Pasternak @ 2020-01-12 12:18 UTC (permalink / raw)
To: andy, dvhart; +Cc: platform-driver-x86, linux-kernel, Vadim Pasternak
Fix attribute name from "jtag_enable", which described twice to
"cpld3_version", which is expected to be instead of second appearance
of "jtag_enable".
Fixes: 2752e34442b5 ("Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
---
v1-v2:
Comments pointed out by Andy:
- Explain that patch fixes documentation inconsistency.
---
Documentation/ABI/stable/sysfs-driver-mlxreg-io | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/ABI/stable/sysfs-driver-mlxreg-io b/Documentation/ABI/stable/sysfs-driver-mlxreg-io
index 8ca498447aeb..8b1461fa3538 100644
--- a/Documentation/ABI/stable/sysfs-driver-mlxreg-io
+++ b/Documentation/ABI/stable/sysfs-driver-mlxreg-io
@@ -29,13 +29,13 @@ Description: This file shows the system fans direction:
The files are read only.
-What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/jtag_enable
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_version
Date: November 2018
KernelVersion: 5.0
Contact: Vadim Pasternak <vadimpmellanox.com>
Description: These files show with which CPLD versions have been burned
- on LED board.
+ on LED or Gearbox board.
The files are read only.
--
2.11.0
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH platform-next v2 03/10] Documentation/ABI: Add missed attribute for mlxreg-io sysfs interfaces
2020-01-12 12:18 [PATCH platform-next v2 00/10] platform/x86: Mellanox new system classes and new features Vadim Pasternak
2020-01-12 12:18 ` [PATCH platform-next v2 01/10] platform/x86: mlx-platform: Cosmetic changes Vadim Pasternak
2020-01-12 12:18 ` [PATCH platform-next v2 02/10] Documentation/ABI: Fix documentation inconsistency for mlxreg-io sysfs interfaces Vadim Pasternak
@ 2020-01-12 12:18 ` Vadim Pasternak
2020-01-13 14:12 ` Andy Shevchenko
2020-01-12 12:18 ` [PATCH platform-next v2 04/10] platform/x86: mlx-platform: Add more definitions for system attributes Vadim Pasternak
` (6 subsequent siblings)
9 siblings, 1 reply; 13+ messages in thread
From: Vadim Pasternak @ 2020-01-12 12:18 UTC (permalink / raw)
To: andy, dvhart; +Cc: platform-driver-x86, linux-kernel, Vadim Pasternak
Add missed "cpld4_version" attribute.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
---
Documentation/ABI/stable/sysfs-driver-mlxreg-io | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/Documentation/ABI/stable/sysfs-driver-mlxreg-io b/Documentation/ABI/stable/sysfs-driver-mlxreg-io
index 8b1461fa3538..fe30fe505c9b 100644
--- a/Documentation/ABI/stable/sysfs-driver-mlxreg-io
+++ b/Documentation/ABI/stable/sysfs-driver-mlxreg-io
@@ -121,6 +121,16 @@ Description: These files show the system reset cause, as following: ComEx
The files are read only.
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_version
+
+Date: November 2018
+KernelVersion: 5.0
+Contact: Vadim Pasternak <vadimpmellanox.com>
+Description: These files show with which CPLD versions have been burned
+ on LED board.
+
+ The files are read only.
+
Date: June 2019
KernelVersion: 5.3
Contact: Vadim Pasternak <vadimpmellanox.com>
--
2.11.0
^ permalink raw reply related [flat|nested] 13+ messages in thread* Re: [PATCH platform-next v2 03/10] Documentation/ABI: Add missed attribute for mlxreg-io sysfs interfaces
2020-01-12 12:18 ` [PATCH platform-next v2 03/10] Documentation/ABI: Add missed attribute " Vadim Pasternak
@ 2020-01-13 14:12 ` Andy Shevchenko
0 siblings, 0 replies; 13+ messages in thread
From: Andy Shevchenko @ 2020-01-13 14:12 UTC (permalink / raw)
To: Vadim Pasternak
Cc: Andy Shevchenko, Darren Hart, Platform Driver, Linux Kernel Mailing List
On Sun, Jan 12, 2020 at 2:19 PM Vadim Pasternak <vadimp@mellanox.com> wrote:
>
> Add missed "cpld4_version" attribute.
>
Fixes tag?
Also see below.
...
> +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_version
> +
Can we get some consistency here, i.e. drop blank lines between What
and Date everywhere?
(Separate patch)
> +Date: November 2018
> +KernelVersion: 5.0
> +Contact: Vadim Pasternak <vadimpmellanox.com>
> +Description: These files show with which CPLD versions have been burned
> + on LED board.
> +
> + The files are read only.
> +
...following by the starting each section with What keyword.
(Separate patch)
> Date: June 2019
> KernelVersion: 5.3
> Contact: Vadim Pasternak <vadimpmellanox.com>
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH platform-next v2 04/10] platform/x86: mlx-platform: Add more definitions for system attributes
2020-01-12 12:18 [PATCH platform-next v2 00/10] platform/x86: Mellanox new system classes and new features Vadim Pasternak
` (2 preceding siblings ...)
2020-01-12 12:18 ` [PATCH platform-next v2 03/10] Documentation/ABI: Add missed attribute " Vadim Pasternak
@ 2020-01-12 12:18 ` Vadim Pasternak
2020-01-12 12:18 ` [PATCH platform-next v2 05/10] Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces Vadim Pasternak
` (5 subsequent siblings)
9 siblings, 0 replies; 13+ messages in thread
From: Vadim Pasternak @ 2020-01-12 12:18 UTC (permalink / raw)
To: andy, dvhart; +Cc: platform-driver-x86, linux-kernel, Vadim Pasternak
Add new attributes for "next-generation" type systems:
- Reset cause indication, when system reset has been caused by the
platform reset request through CPLD, by AC power failure,
by software power off request through CPLD. by signal asserted by SOC
through ACPI register. It introduces more reset causes, which can
be monitored after the reboots.
- Setting and removing system VPD (EEPROM) hardware write protection.
It allows to access VPD during production cycle and prevents VPD
corruption on system in field.
- Voltage regulator devices configuration update status and version. It
allows to monitor configuration update status and current active
version for such sort of devices.
- PCIe ASIC reset disable - when set ASIC will go down upon PCIe
root complex reset, otherwise ASIC will stay up during PCIe root
complex reset.
- System configuration Ids to provide system static topology
identification, like system's static I2C topology, number and type of
FPGA devices within the system and so on.
Add the existing attribute for "iio" bank selection for system type
"msn21xx".
All the above attributes are exposed through "sysfs" by "mlxreg-io"
driver.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
---
drivers/platform/x86/mlx-platform.c | 84 +++++++++++++++++++++++++++++++++++++
1 file changed, 84 insertions(+)
diff --git a/drivers/platform/x86/mlx-platform.c b/drivers/platform/x86/mlx-platform.c
index 565a67a65554..7e92dc52071f 100644
--- a/drivers/platform/x86/mlx-platform.c
+++ b/drivers/platform/x86/mlx-platform.c
@@ -35,6 +35,8 @@
#define MLXPLAT_CPLD_LPC_REG_LED4_OFFSET 0x23
#define MLXPLAT_CPLD_LPC_REG_LED5_OFFSET 0x24
#define MLXPLAT_CPLD_LPC_REG_FAN_DIRECTION 0x2a
+#define MLXPLAT_CPLD_LPC_REG_GP0_RO_OFFSET 0x2b
+#define MLXPLAT_CPLD_LPC_REG_GP0_OFFSET 0x2e
#define MLXPLAT_CPLD_LPC_REG_GP1_OFFSET 0x30
#define MLXPLAT_CPLD_LPC_REG_WP1_OFFSET 0x31
#define MLXPLAT_CPLD_LPC_REG_GP2_OFFSET 0x32
@@ -68,6 +70,7 @@
#define MLXPLAT_CPLD_LPC_REG_WD3_TMR_OFFSET 0xd1
#define MLXPLAT_CPLD_LPC_REG_WD3_TLEFT_OFFSET 0xd2
#define MLXPLAT_CPLD_LPC_REG_WD3_ACT_OFFSET 0xd3
+#define MLXPLAT_CPLD_LPC_REG_UFM_VERSION_OFFSET 0xe2
#define MLXPLAT_CPLD_LPC_REG_PWM1_OFFSET 0xe3
#define MLXPLAT_CPLD_LPC_REG_TACHO1_OFFSET 0xe4
#define MLXPLAT_CPLD_LPC_REG_TACHO2_OFFSET 0xe5
@@ -85,6 +88,8 @@
#define MLXPLAT_CPLD_LPC_REG_FAN_CAP2_OFFSET 0xf6
#define MLXPLAT_CPLD_LPC_REG_FAN_DRW_CAP_OFFSET 0xf7
#define MLXPLAT_CPLD_LPC_REG_TACHO_SPEED_OFFSET 0xf8
+#define MLXPLAT_CPLD_LPC_REG_CONFIG1_OFFSET 0xfb
+#define MLXPLAT_CPLD_LPC_REG_CONFIG2_OFFSET 0xfc
#define MLXPLAT_CPLD_LPC_IO_RANGE 0x100
#define MLXPLAT_CPLD_LPC_I2C_CH1_OFF 0xdb
#define MLXPLAT_CPLD_LPC_I2C_CH2_OFF 0xda
@@ -117,6 +122,7 @@
#define MLXPLAT_CPLD_FAN_NG_MASK GENMASK(5, 0)
#define MLXPLAT_CPLD_LED_LO_NIBBLE_MASK GENMASK(7, 4)
#define MLXPLAT_CPLD_LED_HI_NIBBLE_MASK GENMASK(3, 0)
+#define MLXPLAT_CPLD_VOLTREG_UPD_MASK GENMASK(5, 4)
/* Default I2C parent bus number */
#define MLXPLAT_CPLD_PHYS_ADAPTER_DEF_NR 1
@@ -1157,6 +1163,12 @@ static struct mlxreg_core_data mlxplat_mlxcpld_msn21xx_regs_io_data[] = {
.mode = 0200,
},
{
+ .label = "select_iio",
+ .reg = MLXPLAT_CPLD_LPC_REG_GP2_OFFSET,
+ .mask = GENMASK(7, 0) & ~BIT(6),
+ .mode = 0644,
+ },
+ {
.label = "asic_health",
.reg = MLXPLAT_CPLD_LPC_REG_ASIC_HEALTH_OFFSET,
.mask = MLXPLAT_CPLD_ASIC_MASK,
@@ -1245,6 +1257,18 @@ static struct mlxreg_core_data mlxplat_mlxcpld_default_ng_regs_io_data[] = {
.mode = 0444,
},
{
+ .label = "reset_platform",
+ .reg = MLXPLAT_CPLD_LPC_REG_RST_CAUSE1_OFFSET,
+ .mask = GENMASK(7, 0) & ~BIT(4),
+ .mode = 0444,
+ },
+ {
+ .label = "reset_soc",
+ .reg = MLXPLAT_CPLD_LPC_REG_RST_CAUSE1_OFFSET,
+ .mask = GENMASK(7, 0) & ~BIT(5),
+ .mode = 0444,
+ },
+ {
.label = "reset_comex_wd",
.reg = MLXPLAT_CPLD_LPC_REG_RST_CAUSE1_OFFSET,
.mask = GENMASK(7, 0) & ~BIT(6),
@@ -1263,6 +1287,12 @@ static struct mlxreg_core_data mlxplat_mlxcpld_default_ng_regs_io_data[] = {
.mode = 0444,
},
{
+ .label = "reset_sw_pwr_off",
+ .reg = MLXPLAT_CPLD_LPC_REG_RST_CAUSE2_OFFSET,
+ .mask = GENMASK(7, 0) & ~BIT(2),
+ .mode = 0444,
+ },
+ {
.label = "reset_comex_thermal",
.reg = MLXPLAT_CPLD_LPC_REG_RST_CAUSE2_OFFSET,
.mask = GENMASK(7, 0) & ~BIT(3),
@@ -1275,6 +1305,12 @@ static struct mlxreg_core_data mlxplat_mlxcpld_default_ng_regs_io_data[] = {
.mode = 0444,
},
{
+ .label = "reset_ac_pwr_fail",
+ .reg = MLXPLAT_CPLD_LPC_REG_RST_CAUSE2_OFFSET,
+ .mask = GENMASK(7, 0) & ~BIT(6),
+ .mode = 0444,
+ },
+ {
.label = "psu1_on",
.reg = MLXPLAT_CPLD_LPC_REG_GP1_OFFSET,
.mask = GENMASK(7, 0) & ~BIT(0),
@@ -1317,6 +1353,43 @@ static struct mlxreg_core_data mlxplat_mlxcpld_default_ng_regs_io_data[] = {
.bit = GENMASK(7, 0),
.mode = 0444,
},
+ {
+ .label = "voltreg_update_status",
+ .reg = MLXPLAT_CPLD_LPC_REG_GP0_RO_OFFSET,
+ .mask = MLXPLAT_CPLD_VOLTREG_UPD_MASK,
+ .bit = 5,
+ .mode = 0444,
+ },
+ {
+ .label = "vpd_wp",
+ .reg = MLXPLAT_CPLD_LPC_REG_GP0_OFFSET,
+ .mask = GENMASK(7, 0) & ~BIT(3),
+ .mode = 0644,
+ },
+ {
+ .label = "pcie_asic_reset_dis",
+ .reg = MLXPLAT_CPLD_LPC_REG_GP0_OFFSET,
+ .mask = GENMASK(7, 0) & ~BIT(4),
+ .mode = 0644,
+ },
+ {
+ .label = "config1",
+ .reg = MLXPLAT_CPLD_LPC_REG_CONFIG1_OFFSET,
+ .bit = GENMASK(7, 0),
+ .mode = 0444,
+ },
+ {
+ .label = "config2",
+ .reg = MLXPLAT_CPLD_LPC_REG_CONFIG2_OFFSET,
+ .bit = GENMASK(7, 0),
+ .mode = 0444,
+ },
+ {
+ .label = "ufm_version",
+ .reg = MLXPLAT_CPLD_LPC_REG_UFM_VERSION_OFFSET,
+ .bit = GENMASK(7, 0),
+ .mode = 0444,
+ },
};
static struct mlxreg_core_platform_data mlxplat_default_ng_regs_io_data = {
@@ -1575,6 +1648,7 @@ static bool mlxplat_mlxcpld_writeable_reg(struct device *dev, unsigned int reg)
case MLXPLAT_CPLD_LPC_REG_LED3_OFFSET:
case MLXPLAT_CPLD_LPC_REG_LED4_OFFSET:
case MLXPLAT_CPLD_LPC_REG_LED5_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_GP0_OFFSET:
case MLXPLAT_CPLD_LPC_REG_GP1_OFFSET:
case MLXPLAT_CPLD_LPC_REG_WP1_OFFSET:
case MLXPLAT_CPLD_LPC_REG_GP2_OFFSET:
@@ -1621,6 +1695,8 @@ static bool mlxplat_mlxcpld_readable_reg(struct device *dev, unsigned int reg)
case MLXPLAT_CPLD_LPC_REG_LED4_OFFSET:
case MLXPLAT_CPLD_LPC_REG_LED5_OFFSET:
case MLXPLAT_CPLD_LPC_REG_FAN_DIRECTION:
+ case MLXPLAT_CPLD_LPC_REG_GP0_RO_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_GP0_OFFSET:
case MLXPLAT_CPLD_LPC_REG_GP1_OFFSET:
case MLXPLAT_CPLD_LPC_REG_WP1_OFFSET:
case MLXPLAT_CPLD_LPC_REG_GP2_OFFSET:
@@ -1671,6 +1747,9 @@ static bool mlxplat_mlxcpld_readable_reg(struct device *dev, unsigned int reg)
case MLXPLAT_CPLD_LPC_REG_FAN_CAP2_OFFSET:
case MLXPLAT_CPLD_LPC_REG_FAN_DRW_CAP_OFFSET:
case MLXPLAT_CPLD_LPC_REG_TACHO_SPEED_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_CONFIG1_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_CONFIG2_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_UFM_VERSION_OFFSET:
return true;
}
return false;
@@ -1692,6 +1771,8 @@ static bool mlxplat_mlxcpld_volatile_reg(struct device *dev, unsigned int reg)
case MLXPLAT_CPLD_LPC_REG_LED4_OFFSET:
case MLXPLAT_CPLD_LPC_REG_LED5_OFFSET:
case MLXPLAT_CPLD_LPC_REG_FAN_DIRECTION:
+ case MLXPLAT_CPLD_LPC_REG_GP0_RO_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_GP0_OFFSET:
case MLXPLAT_CPLD_LPC_REG_GP1_OFFSET:
case MLXPLAT_CPLD_LPC_REG_GP2_OFFSET:
case MLXPLAT_CPLD_LPC_REG_AGGR_OFFSET:
@@ -1734,6 +1815,9 @@ static bool mlxplat_mlxcpld_volatile_reg(struct device *dev, unsigned int reg)
case MLXPLAT_CPLD_LPC_REG_FAN_CAP2_OFFSET:
case MLXPLAT_CPLD_LPC_REG_FAN_DRW_CAP_OFFSET:
case MLXPLAT_CPLD_LPC_REG_TACHO_SPEED_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_CONFIG1_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_CONFIG2_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_UFM_VERSION_OFFSET:
return true;
}
return false;
--
2.11.0
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH platform-next v2 05/10] Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
2020-01-12 12:18 [PATCH platform-next v2 00/10] platform/x86: Mellanox new system classes and new features Vadim Pasternak
` (3 preceding siblings ...)
2020-01-12 12:18 ` [PATCH platform-next v2 04/10] platform/x86: mlx-platform: Add more definitions for system attributes Vadim Pasternak
@ 2020-01-12 12:18 ` Vadim Pasternak
2020-01-13 14:13 ` Andy Shevchenko
2020-01-12 12:18 ` [PATCH platform-next v2 06/10] platform/x86: mlx-platform: Set system mux configuration based on system type Vadim Pasternak
` (4 subsequent siblings)
9 siblings, 1 reply; 13+ messages in thread
From: Vadim Pasternak @ 2020-01-12 12:18 UTC (permalink / raw)
To: andy, dvhart; +Cc: platform-driver-x86, linux-kernel, Vadim Pasternak
Add documentation for the new attributes for:
- Exposing reset causes types asserted by: platform reset, SoC reset,
AC power failure, software power off request.
- Setting and removing system VPD (EEPROM) hardware write protection.
- Voltage regulator devices configuration update status and firmware
version.
- Setting PCIe ASIC reset to disable or enable state during PCIe root
complex reset.
- System static topology identification, like system's static I2C
topology, number and type of FPGA devices within the system and so on.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
---
v1-v2:
Changes added by Vadim:
- Change "Date" to "January 2020".
---
Documentation/ABI/stable/sysfs-driver-mlxreg-io | 69 +++++++++++++++++++++++++
1 file changed, 69 insertions(+)
diff --git a/Documentation/ABI/stable/sysfs-driver-mlxreg-io b/Documentation/ABI/stable/sysfs-driver-mlxreg-io
index fe30fe505c9b..79c37b752d0f 100644
--- a/Documentation/ABI/stable/sysfs-driver-mlxreg-io
+++ b/Documentation/ABI/stable/sysfs-driver-mlxreg-io
@@ -150,3 +150,72 @@ What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_from_asic
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_reload_bios
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sff_wd
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_swb_wd
+
+Date: January 2020
+KernelVersion: 5.6
+Contact: Vadim Pasternak <vadimpmellanox.com>
+Description: These files show system static topology identification
+ like system's static I2C topology, number and type of FPGA
+ devices within the system and so on.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config1
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config2
+
+ The files are read only.
+
+Date: January 2020
+KernelVersion: 5.6
+Contact: Vadim Pasternak <vadimpmellanox.com>
+Description: These files show the system reset causes, as following: reset
+ due to AC power failure, reset invoked from software by
+ assertion reset signal through CPLD. reset caused by signal
+ asserted by SOC through ACPI register, reset invoked from
+ software by assertion power off signal through CPLD.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_ac_pwr_fail
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_platform
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_soc
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sw_pwr_off
+
+ The files are read only.
+
+Date: January 2020
+KernelVersion: 5.6
+Contact: Vadim Pasternak <vadimpmellanox.com>
+Description: This file allows to retain ASIC up during PCIe root complex
+ reset, when attribute is set 1.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pcie_asic_reset_dis
+
+ The file is read/write.
+
+Date: January 2020
+KernelVersion: 5.6
+Contact: Vadim Pasternak <vadimpmellanox.com>
+Description: This file allows to overwrite system VPD hardware wrtie
+ protection when attribute is set 1.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/vpd_wp
+
+ The file is read/write.
+
+Date: January 2020
+KernelVersion: 5.6
+Contact: Vadim Pasternak <vadimpmellanox.com>
+Description: This file exposes the configuration update status of burnable
+ voltage regulator devices. The status values are as following:
+ 0 - OK; 1 - CRC failure; 2 = I2C failure; 3 - in progress.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/voltreg_update_status
+
+ The file is read only.
+
+Date: January 2020
+KernelVersion: 5.6
+Contact: Vadim Pasternak <vadimpmellanox.com>
+Description: This file exposes the firmware version of burnable voltage
+ regulator devices.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ufm_version
+
+ The file is read only.
--
2.11.0
^ permalink raw reply related [flat|nested] 13+ messages in thread* Re: [PATCH platform-next v2 05/10] Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
2020-01-12 12:18 ` [PATCH platform-next v2 05/10] Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces Vadim Pasternak
@ 2020-01-13 14:13 ` Andy Shevchenko
0 siblings, 0 replies; 13+ messages in thread
From: Andy Shevchenko @ 2020-01-13 14:13 UTC (permalink / raw)
To: Vadim Pasternak
Cc: Andy Shevchenko, Darren Hart, Platform Driver, Linux Kernel Mailing List
On Sun, Jan 12, 2020 at 2:19 PM Vadim Pasternak <vadimp@mellanox.com> wrote:
>
> Add documentation for the new attributes for:
> - Exposing reset causes types asserted by: platform reset, SoC reset,
> AC power failure, software power off request.
> - Setting and removing system VPD (EEPROM) hardware write protection.
> - Voltage regulator devices configuration update status and firmware
> version.
> - Setting PCIe ASIC reset to disable or enable state during PCIe root
> complex reset.
> - System static topology identification, like system's static I2C
> topology, number and type of FPGA devices within the system and so on.
>
Same comments as per previous patch (style related)
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH platform-next v2 06/10] platform/x86: mlx-platform: Set system mux configuration based on system type
2020-01-12 12:18 [PATCH platform-next v2 00/10] platform/x86: Mellanox new system classes and new features Vadim Pasternak
` (4 preceding siblings ...)
2020-01-12 12:18 ` [PATCH platform-next v2 05/10] Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces Vadim Pasternak
@ 2020-01-12 12:18 ` Vadim Pasternak
2020-01-12 12:18 ` [PATCH platform-next v2 07/10] platform/x86: mlx-platform: Add support for new " Vadim Pasternak
` (3 subsequent siblings)
9 siblings, 0 replies; 13+ messages in thread
From: Vadim Pasternak @ 2020-01-12 12:18 UTC (permalink / raw)
To: andy, dvhart; +Cc: platform-driver-x86, linux-kernel, Vadim Pasternak
Separate assignment for systems mux configuration based on system type,
instead of setting the same configuration for the all.
The motivation is to allow introduction of new systems types with the
different mux topology.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
---
v1-v2:
Comments pointed out by Andy:
Drop semicolon after mlxplat_dmi_qmb7xx_matched().
---
drivers/platform/x86/mlx-platform.c | 44 +++++++++++++++++++++++++++----------
1 file changed, 32 insertions(+), 12 deletions(-)
diff --git a/drivers/platform/x86/mlx-platform.c b/drivers/platform/x86/mlx-platform.c
index 7e92dc52071f..53c23a99e182 100644
--- a/drivers/platform/x86/mlx-platform.c
+++ b/drivers/platform/x86/mlx-platform.c
@@ -219,7 +219,7 @@ static const int mlxplat_default_channels[][MLXPLAT_CPLD_GRP_CHNL_NUM] = {
static const int mlxplat_msn21xx_channels[] = { 1, 2, 3, 4, 5, 6, 7, 8 };
/* Platform mux data */
-static struct i2c_mux_reg_platform_data mlxplat_mux_data[] = {
+static struct i2c_mux_reg_platform_data mlxplat_default_mux_data[] = {
{
.parent = 1,
.base_nr = MLXPLAT_CPLD_CH1,
@@ -239,6 +239,11 @@ static struct i2c_mux_reg_platform_data mlxplat_mux_data[] = {
};
+/* Platform mux configuration variables */
+static int mlxplat_max_adap_num;
+static int mlxplat_mux_num;
+static struct i2c_mux_reg_platform_data *mlxplat_mux_data;
+
/* Platform hotplug devices */
static struct i2c_board_info mlxplat_mlxcpld_psu[] = {
{
@@ -1905,7 +1910,10 @@ static int __init mlxplat_dmi_default_matched(const struct dmi_system_id *dmi)
{
int i;
- for (i = 0; i < ARRAY_SIZE(mlxplat_mux_data); i++) {
+ mlxplat_max_adap_num = MLXPLAT_CPLD_MAX_PHYS_ADAPTER_NUM;
+ mlxplat_mux_num = ARRAY_SIZE(mlxplat_default_mux_data);
+ mlxplat_mux_data = mlxplat_default_mux_data;
+ for (i = 0; i < mlxplat_mux_num; i++) {
mlxplat_mux_data[i].values = mlxplat_default_channels[i];
mlxplat_mux_data[i].n_values =
ARRAY_SIZE(mlxplat_default_channels[i]);
@@ -1924,7 +1932,10 @@ static int __init mlxplat_dmi_msn21xx_matched(const struct dmi_system_id *dmi)
{
int i;
- for (i = 0; i < ARRAY_SIZE(mlxplat_mux_data); i++) {
+ mlxplat_max_adap_num = MLXPLAT_CPLD_MAX_PHYS_ADAPTER_NUM;
+ mlxplat_mux_num = ARRAY_SIZE(mlxplat_default_mux_data);
+ mlxplat_mux_data = mlxplat_default_mux_data;
+ for (i = 0; i < mlxplat_mux_num; i++) {
mlxplat_mux_data[i].values = mlxplat_msn21xx_channels;
mlxplat_mux_data[i].n_values =
ARRAY_SIZE(mlxplat_msn21xx_channels);
@@ -1943,7 +1954,10 @@ static int __init mlxplat_dmi_msn274x_matched(const struct dmi_system_id *dmi)
{
int i;
- for (i = 0; i < ARRAY_SIZE(mlxplat_mux_data); i++) {
+ mlxplat_max_adap_num = MLXPLAT_CPLD_MAX_PHYS_ADAPTER_NUM;
+ mlxplat_mux_num = ARRAY_SIZE(mlxplat_default_mux_data);
+ mlxplat_mux_data = mlxplat_default_mux_data;
+ for (i = 0; i < mlxplat_mux_num; i++) {
mlxplat_mux_data[i].values = mlxplat_msn21xx_channels;
mlxplat_mux_data[i].n_values =
ARRAY_SIZE(mlxplat_msn21xx_channels);
@@ -1962,7 +1976,10 @@ static int __init mlxplat_dmi_msn201x_matched(const struct dmi_system_id *dmi)
{
int i;
- for (i = 0; i < ARRAY_SIZE(mlxplat_mux_data); i++) {
+ mlxplat_max_adap_num = MLXPLAT_CPLD_MAX_PHYS_ADAPTER_NUM;
+ mlxplat_mux_num = ARRAY_SIZE(mlxplat_default_mux_data);
+ mlxplat_mux_data = mlxplat_default_mux_data;
+ for (i = 0; i < mlxplat_mux_num; i++) {
mlxplat_mux_data[i].values = mlxplat_msn21xx_channels;
mlxplat_mux_data[i].n_values =
ARRAY_SIZE(mlxplat_msn21xx_channels);
@@ -1981,7 +1998,10 @@ static int __init mlxplat_dmi_qmb7xx_matched(const struct dmi_system_id *dmi)
{
int i;
- for (i = 0; i < ARRAY_SIZE(mlxplat_mux_data); i++) {
+ mlxplat_max_adap_num = MLXPLAT_CPLD_MAX_PHYS_ADAPTER_NUM;
+ mlxplat_mux_num = ARRAY_SIZE(mlxplat_default_mux_data);
+ mlxplat_mux_data = mlxplat_default_mux_data;
+ for (i = 0; i < mlxplat_mux_num; i++) {
mlxplat_mux_data[i].values = mlxplat_msn21xx_channels;
mlxplat_mux_data[i].n_values =
ARRAY_SIZE(mlxplat_msn21xx_channels);
@@ -2127,7 +2147,7 @@ static int mlxplat_mlxcpld_verify_bus_topology(int *nr)
/* Scan adapters from expected id to verify it is free. */
*nr = MLXPLAT_CPLD_PHYS_ADAPTER_DEF_NR;
for (i = MLXPLAT_CPLD_PHYS_ADAPTER_DEF_NR; i <
- MLXPLAT_CPLD_MAX_PHYS_ADAPTER_NUM; i++) {
+ mlxplat_max_adap_num; i++) {
search_adap = i2c_get_adapter(i);
if (search_adap) {
i2c_put_adapter(search_adap);
@@ -2141,12 +2161,12 @@ static int mlxplat_mlxcpld_verify_bus_topology(int *nr)
}
/* Return with error if free id for adapter is not found. */
- if (i == MLXPLAT_CPLD_MAX_PHYS_ADAPTER_NUM)
+ if (i == mlxplat_max_adap_num)
return -ENODEV;
/* Shift adapter ids, since expected parent adapter is not free. */
*nr = i;
- for (i = 0; i < ARRAY_SIZE(mlxplat_mux_data); i++) {
+ for (i = 0; i < mlxplat_mux_num; i++) {
shift = *nr - mlxplat_mux_data[i].parent;
mlxplat_mux_data[i].parent = *nr;
mlxplat_mux_data[i].base_nr += shift;
@@ -2202,7 +2222,7 @@ static int __init mlxplat_init(void)
if (nr < 0)
goto fail_alloc;
- nr = (nr == MLXPLAT_CPLD_MAX_PHYS_ADAPTER_NUM) ? -1 : nr;
+ nr = (nr == mlxplat_max_adap_num) ? -1 : nr;
if (mlxplat_i2c)
mlxplat_i2c->regmap = priv->regmap;
priv->pdev_i2c = platform_device_register_resndata(
@@ -2215,7 +2235,7 @@ static int __init mlxplat_init(void)
goto fail_alloc;
}
- for (i = 0; i < ARRAY_SIZE(mlxplat_mux_data); i++) {
+ for (i = 0; i < mlxplat_mux_num; i++) {
priv->pdev_mux[i] = platform_device_register_resndata(
&priv->pdev_i2c->dev,
"i2c-mux-reg", i, NULL,
@@ -2349,7 +2369,7 @@ static void __exit mlxplat_exit(void)
platform_device_unregister(priv->pdev_led);
platform_device_unregister(priv->pdev_hotplug);
- for (i = ARRAY_SIZE(mlxplat_mux_data) - 1; i >= 0 ; i--)
+ for (i = mlxplat_mux_num - 1; i >= 0 ; i--)
platform_device_unregister(priv->pdev_mux[i]);
platform_device_unregister(priv->pdev_i2c);
--
2.11.0
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH platform-next v2 07/10] platform/x86: mlx-platform: Add support for new system type
2020-01-12 12:18 [PATCH platform-next v2 00/10] platform/x86: Mellanox new system classes and new features Vadim Pasternak
` (5 preceding siblings ...)
2020-01-12 12:18 ` [PATCH platform-next v2 06/10] platform/x86: mlx-platform: Set system mux configuration based on system type Vadim Pasternak
@ 2020-01-12 12:18 ` Vadim Pasternak
2020-01-12 12:18 ` [PATCH platform-next v2 08/10] platform/x86: mlx-platform: Add support for new capability register Vadim Pasternak
` (2 subsequent siblings)
9 siblings, 0 replies; 13+ messages in thread
From: Vadim Pasternak @ 2020-01-12 12:18 UTC (permalink / raw)
To: andy, dvhart; +Cc: platform-driver-x86, linux-kernel, Vadim Pasternak
Add support for new Mellanox system types of basic class VMOD0009,
containing Mellanox systems equipped with the switch devices
Spectrum 1 (32x100GbE Ethernet switch) and Switch-IB/Switch-IB2
(36x100Gbe InfiniBand switch).
These are the Top of the Rack system, equipped with Mellanox Comex
card.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
---
drivers/platform/x86/mlx-platform.c | 239 +++++++++++++++++++++++++++++++++++-
1 file changed, 238 insertions(+), 1 deletion(-)
diff --git a/drivers/platform/x86/mlx-platform.c b/drivers/platform/x86/mlx-platform.c
index 53c23a99e182..31c04ee53989 100644
--- a/drivers/platform/x86/mlx-platform.c
+++ b/drivers/platform/x86/mlx-platform.c
@@ -48,6 +48,8 @@
#define MLXPLAT_CPLD_LPC_REG_AGGRLO_MASK_OFFSET 0x41
#define MLXPLAT_CPLD_LPC_REG_AGGRCO_OFFSET 0x42
#define MLXPLAT_CPLD_LPC_REG_AGGRCO_MASK_OFFSET 0x43
+#define MLXPLAT_CPLD_LPC_REG_AGGRCX_OFFSET 0x44
+#define MLXPLAT_CPLD_LPC_REG_AGGRCX_MASK_OFFSET 0x45
#define MLXPLAT_CPLD_LPC_REG_ASIC_HEALTH_OFFSET 0x50
#define MLXPLAT_CPLD_LPC_REG_ASIC_EVENT_OFFSET 0x51
#define MLXPLAT_CPLD_LPC_REG_ASIC_MASK_OFFSET 0x52
@@ -93,6 +95,7 @@
#define MLXPLAT_CPLD_LPC_IO_RANGE 0x100
#define MLXPLAT_CPLD_LPC_I2C_CH1_OFF 0xdb
#define MLXPLAT_CPLD_LPC_I2C_CH2_OFF 0xda
+#define MLXPLAT_CPLD_LPC_I2C_CH3_OFF 0xdc
#define MLXPLAT_CPLD_LPC_PIO_OFFSET 0x10000UL
#define MLXPLAT_CPLD_LPC_REG1 ((MLXPLAT_CPLD_LPC_REG_BASE_ADRR + \
@@ -101,6 +104,9 @@
#define MLXPLAT_CPLD_LPC_REG2 ((MLXPLAT_CPLD_LPC_REG_BASE_ADRR + \
MLXPLAT_CPLD_LPC_I2C_CH2_OFF) | \
MLXPLAT_CPLD_LPC_PIO_OFFSET)
+#define MLXPLAT_CPLD_LPC_REG3 ((MLXPLAT_CPLD_LPC_REG_BASE_ADRR + \
+ MLXPLAT_CPLD_LPC_I2C_CH3_OFF) | \
+ MLXPLAT_CPLD_LPC_PIO_OFFSET)
/* Masks for aggregation, psu, pwr and fan event in CPLD related registers. */
#define MLXPLAT_CPLD_AGGR_ASIC_MASK_DEF 0x04
@@ -124,11 +130,18 @@
#define MLXPLAT_CPLD_LED_HI_NIBBLE_MASK GENMASK(3, 0)
#define MLXPLAT_CPLD_VOLTREG_UPD_MASK GENMASK(5, 4)
+/* Masks for aggregation for comex carriers */
+#define MLXPLAT_CPLD_AGGR_MASK_CARRIER BIT(1)
+#define MLXPLAT_CPLD_AGGR_MASK_CARR_DEF (MLXPLAT_CPLD_AGGR_ASIC_MASK_DEF | \
+ MLXPLAT_CPLD_AGGR_MASK_CARRIER)
+#define MLXPLAT_CPLD_LOW_AGGRCX_MASK 0xc1
+
/* Default I2C parent bus number */
#define MLXPLAT_CPLD_PHYS_ADAPTER_DEF_NR 1
/* Maximum number of possible physical buses equipped on system */
#define MLXPLAT_CPLD_MAX_PHYS_ADAPTER_NUM 16
+#define MLXPLAT_CPLD_MAX_PHYS_EXT_ADAPTER_NUM 24
/* Number of channels in group */
#define MLXPLAT_CPLD_GRP_CHNL_NUM 8
@@ -136,9 +149,10 @@
/* Start channel numbers */
#define MLXPLAT_CPLD_CH1 2
#define MLXPLAT_CPLD_CH2 10
+#define MLXPLAT_CPLD_CH3 18
/* Number of LPC attached MUX platform devices */
-#define MLXPLAT_CPLD_LPC_MUX_DEVS 2
+#define MLXPLAT_CPLD_LPC_MUX_DEVS 3
/* Hotplug devices adapter numbers */
#define MLXPLAT_CPLD_NR_NONE -1
@@ -244,6 +258,35 @@ static int mlxplat_max_adap_num;
static int mlxplat_mux_num;
static struct i2c_mux_reg_platform_data *mlxplat_mux_data;
+/* Platform extended mux data */
+static struct i2c_mux_reg_platform_data mlxplat_extended_mux_data[] = {
+ {
+ .parent = 1,
+ .base_nr = MLXPLAT_CPLD_CH1,
+ .write_only = 1,
+ .reg = (void __iomem *)MLXPLAT_CPLD_LPC_REG1,
+ .reg_size = 1,
+ .idle_in_use = 1,
+ },
+ {
+ .parent = 1,
+ .base_nr = MLXPLAT_CPLD_CH2,
+ .write_only = 1,
+ .reg = (void __iomem *)MLXPLAT_CPLD_LPC_REG3,
+ .reg_size = 1,
+ .idle_in_use = 1,
+ },
+ {
+ .parent = 1,
+ .base_nr = MLXPLAT_CPLD_CH3,
+ .write_only = 1,
+ .reg = (void __iomem *)MLXPLAT_CPLD_LPC_REG2,
+ .reg_size = 1,
+ .idle_in_use = 1,
+ },
+
+};
+
/* Platform hotplug devices */
static struct i2c_board_info mlxplat_mlxcpld_psu[] = {
{
@@ -287,6 +330,22 @@ static struct i2c_board_info mlxplat_mlxcpld_fan[] = {
},
};
+/* Platform hotplug comex carrier system family data */
+static struct mlxreg_core_data mlxplat_mlxcpld_comex_psu_items_data[] = {
+ {
+ .label = "psu1",
+ .reg = MLXPLAT_CPLD_LPC_REG_PSU_OFFSET,
+ .mask = BIT(0),
+ .hpdev.nr = MLXPLAT_CPLD_NR_NONE,
+ },
+ {
+ .label = "psu2",
+ .reg = MLXPLAT_CPLD_LPC_REG_PSU_OFFSET,
+ .mask = BIT(1),
+ .hpdev.nr = MLXPLAT_CPLD_NR_NONE,
+ },
+};
+
/* Platform hotplug default data */
static struct mlxreg_core_data mlxplat_mlxcpld_default_psu_items_data[] = {
{
@@ -401,6 +460,45 @@ static struct mlxreg_core_item mlxplat_mlxcpld_default_items[] = {
},
};
+static struct mlxreg_core_item mlxplat_mlxcpld_comex_items[] = {
+ {
+ .data = mlxplat_mlxcpld_comex_psu_items_data,
+ .aggr_mask = MLXPLAT_CPLD_AGGR_MASK_CARRIER,
+ .reg = MLXPLAT_CPLD_LPC_REG_PSU_OFFSET,
+ .mask = MLXPLAT_CPLD_PSU_MASK,
+ .count = ARRAY_SIZE(mlxplat_mlxcpld_psu),
+ .inversed = 1,
+ .health = false,
+ },
+ {
+ .data = mlxplat_mlxcpld_default_pwr_items_data,
+ .aggr_mask = MLXPLAT_CPLD_AGGR_MASK_CARRIER,
+ .reg = MLXPLAT_CPLD_LPC_REG_PWR_OFFSET,
+ .mask = MLXPLAT_CPLD_PWR_MASK,
+ .count = ARRAY_SIZE(mlxplat_mlxcpld_pwr),
+ .inversed = 0,
+ .health = false,
+ },
+ {
+ .data = mlxplat_mlxcpld_default_fan_items_data,
+ .aggr_mask = MLXPLAT_CPLD_AGGR_MASK_CARRIER,
+ .reg = MLXPLAT_CPLD_LPC_REG_FAN_OFFSET,
+ .mask = MLXPLAT_CPLD_FAN_MASK,
+ .count = ARRAY_SIZE(mlxplat_mlxcpld_fan),
+ .inversed = 1,
+ .health = false,
+ },
+ {
+ .data = mlxplat_mlxcpld_default_asic_items_data,
+ .aggr_mask = MLXPLAT_CPLD_AGGR_ASIC_MASK_DEF,
+ .reg = MLXPLAT_CPLD_LPC_REG_ASIC_HEALTH_OFFSET,
+ .mask = MLXPLAT_CPLD_ASIC_MASK,
+ .count = ARRAY_SIZE(mlxplat_mlxcpld_default_asic_items_data),
+ .inversed = 0,
+ .health = true,
+ },
+};
+
static
struct mlxreg_core_hotplug_platform_data mlxplat_mlxcpld_default_data = {
.items = mlxplat_mlxcpld_default_items,
@@ -411,6 +509,16 @@ struct mlxreg_core_hotplug_platform_data mlxplat_mlxcpld_default_data = {
.mask_low = MLXPLAT_CPLD_LOW_AGGR_MASK_LOW,
};
+static
+struct mlxreg_core_hotplug_platform_data mlxplat_mlxcpld_comex_data = {
+ .items = mlxplat_mlxcpld_comex_items,
+ .counter = ARRAY_SIZE(mlxplat_mlxcpld_comex_items),
+ .cell = MLXPLAT_CPLD_LPC_REG_AGGR_OFFSET,
+ .mask = MLXPLAT_CPLD_AGGR_MASK_CARR_DEF,
+ .cell_low = MLXPLAT_CPLD_LPC_REG_AGGRCX_OFFSET,
+ .mask_low = MLXPLAT_CPLD_LOW_AGGRCX_MASK,
+};
+
static struct mlxreg_core_data mlxplat_mlxcpld_msn21xx_pwr_items_data[] = {
{
.label = "pwr1",
@@ -975,6 +1083,80 @@ static struct mlxreg_core_platform_data mlxplat_default_ng_led_data = {
.counter = ARRAY_SIZE(mlxplat_mlxcpld_default_ng_led_data),
};
+/* Platform led for Comex based 100GbE systems */
+static struct mlxreg_core_data mlxplat_mlxcpld_comex_100G_led_data[] = {
+ {
+ .label = "status:green",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED1_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK,
+ },
+ {
+ .label = "status:red",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED1_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK
+ },
+ {
+ .label = "psu:green",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED1_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_HI_NIBBLE_MASK,
+ },
+ {
+ .label = "psu:red",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED1_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_HI_NIBBLE_MASK,
+ },
+ {
+ .label = "fan1:green",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED2_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK,
+ },
+ {
+ .label = "fan1:red",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED2_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK,
+ },
+ {
+ .label = "fan2:green",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED2_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_HI_NIBBLE_MASK,
+ },
+ {
+ .label = "fan2:red",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED2_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_HI_NIBBLE_MASK,
+ },
+ {
+ .label = "fan3:green",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED3_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK,
+ },
+ {
+ .label = "fan3:red",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED3_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK,
+ },
+ {
+ .label = "fan4:green",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED3_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_HI_NIBBLE_MASK,
+ },
+ {
+ .label = "fan4:red",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED3_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_HI_NIBBLE_MASK,
+ },
+ {
+ .label = "uid:blue",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED5_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK,
+ },
+};
+
+static struct mlxreg_core_platform_data mlxplat_comex_100G_led_data = {
+ .data = mlxplat_mlxcpld_comex_100G_led_data,
+ .counter = ARRAY_SIZE(mlxplat_mlxcpld_comex_100G_led_data),
+};
+
/* Platform register access default */
static struct mlxreg_core_data mlxplat_mlxcpld_default_regs_io_data[] = {
{
@@ -1661,6 +1843,7 @@ static bool mlxplat_mlxcpld_writeable_reg(struct device *dev, unsigned int reg)
case MLXPLAT_CPLD_LPC_REG_AGGR_MASK_OFFSET:
case MLXPLAT_CPLD_LPC_REG_AGGRLO_MASK_OFFSET:
case MLXPLAT_CPLD_LPC_REG_AGGRCO_MASK_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_AGGRCX_MASK_OFFSET:
case MLXPLAT_CPLD_LPC_REG_ASIC_EVENT_OFFSET:
case MLXPLAT_CPLD_LPC_REG_ASIC_MASK_OFFSET:
case MLXPLAT_CPLD_LPC_REG_PSU_EVENT_OFFSET:
@@ -1712,6 +1895,8 @@ static bool mlxplat_mlxcpld_readable_reg(struct device *dev, unsigned int reg)
case MLXPLAT_CPLD_LPC_REG_AGGRLO_MASK_OFFSET:
case MLXPLAT_CPLD_LPC_REG_AGGRCO_OFFSET:
case MLXPLAT_CPLD_LPC_REG_AGGRCO_MASK_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_AGGRCX_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_AGGRCX_MASK_OFFSET:
case MLXPLAT_CPLD_LPC_REG_ASIC_HEALTH_OFFSET:
case MLXPLAT_CPLD_LPC_REG_ASIC_EVENT_OFFSET:
case MLXPLAT_CPLD_LPC_REG_ASIC_MASK_OFFSET:
@@ -1786,6 +1971,8 @@ static bool mlxplat_mlxcpld_volatile_reg(struct device *dev, unsigned int reg)
case MLXPLAT_CPLD_LPC_REG_AGGRLO_MASK_OFFSET:
case MLXPLAT_CPLD_LPC_REG_AGGRCO_OFFSET:
case MLXPLAT_CPLD_LPC_REG_AGGRCO_MASK_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_AGGRCX_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_AGGRCX_MASK_OFFSET:
case MLXPLAT_CPLD_LPC_REG_ASIC_HEALTH_OFFSET:
case MLXPLAT_CPLD_LPC_REG_ASIC_EVENT_OFFSET:
case MLXPLAT_CPLD_LPC_REG_ASIC_MASK_OFFSET:
@@ -1840,6 +2027,12 @@ static const struct reg_default mlxplat_mlxcpld_regmap_ng[] = {
{ MLXPLAT_CPLD_LPC_REG_WD_CLEAR_WP_OFFSET, 0x00 },
};
+static const struct reg_default mlxplat_mlxcpld_regmap_comex_default[] = {
+ { MLXPLAT_CPLD_LPC_REG_AGGRCX_MASK_OFFSET,
+ MLXPLAT_CPLD_LOW_AGGRCX_MASK },
+ { MLXPLAT_CPLD_LPC_REG_PWM_CONTROL_OFFSET, 0x00 },
+};
+
struct mlxplat_mlxcpld_regmap_context {
void __iomem *base;
};
@@ -1892,6 +2085,20 @@ static const struct regmap_config mlxplat_mlxcpld_regmap_config_ng = {
.reg_write = mlxplat_mlxcpld_reg_write,
};
+static const struct regmap_config mlxplat_mlxcpld_regmap_config_comex = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = 255,
+ .cache_type = REGCACHE_FLAT,
+ .writeable_reg = mlxplat_mlxcpld_writeable_reg,
+ .readable_reg = mlxplat_mlxcpld_readable_reg,
+ .volatile_reg = mlxplat_mlxcpld_volatile_reg,
+ .reg_defaults = mlxplat_mlxcpld_regmap_comex_default,
+ .num_reg_defaults = ARRAY_SIZE(mlxplat_mlxcpld_regmap_comex_default),
+ .reg_read = mlxplat_mlxcpld_reg_read,
+ .reg_write = mlxplat_mlxcpld_reg_write,
+};
+
static struct resource mlxplat_mlxcpld_resources[] = {
[0] = DEFINE_RES_IRQ_NAMED(17, "mlxreg-hotplug"),
};
@@ -2020,6 +2227,30 @@ static int __init mlxplat_dmi_qmb7xx_matched(const struct dmi_system_id *dmi)
return 1;
}
+static int __init mlxplat_dmi_comex_matched(const struct dmi_system_id *dmi)
+{
+ int i;
+
+ mlxplat_max_adap_num = MLXPLAT_CPLD_MAX_PHYS_EXT_ADAPTER_NUM;
+ mlxplat_mux_num = ARRAY_SIZE(mlxplat_extended_mux_data);
+ mlxplat_mux_data = mlxplat_extended_mux_data;
+ for (i = 0; i < mlxplat_mux_num; i++) {
+ mlxplat_mux_data[i].values = mlxplat_msn21xx_channels;
+ mlxplat_mux_data[i].n_values =
+ ARRAY_SIZE(mlxplat_msn21xx_channels);
+ }
+ mlxplat_hotplug = &mlxplat_mlxcpld_comex_data;
+ mlxplat_hotplug->deferred_nr = MLXPLAT_CPLD_MAX_PHYS_EXT_ADAPTER_NUM;
+ mlxplat_led = &mlxplat_comex_100G_led_data;
+ mlxplat_regs_io = &mlxplat_default_ng_regs_io_data;
+ mlxplat_fan = &mlxplat_default_fan_data;
+ for (i = 0; i < ARRAY_SIZE(mlxplat_mlxcpld_wd_set_type2); i++)
+ mlxplat_wd_data[i] = &mlxplat_mlxcpld_wd_set_type2[i];
+ mlxplat_regmap_config = &mlxplat_mlxcpld_regmap_config_comex;
+
+ return 1;
+}
+
static const struct dmi_system_id mlxplat_dmi_table[] __initconst = {
{
.callback = mlxplat_dmi_default_matched,
@@ -2058,6 +2289,12 @@ static const struct dmi_system_id mlxplat_dmi_table[] __initconst = {
},
},
{
+ .callback = mlxplat_dmi_comex_matched,
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "VMOD0009"),
+ },
+ },
+ {
.callback = mlxplat_dmi_msn274x_matched,
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Mellanox Technologies"),
--
2.11.0
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH platform-next v2 08/10] platform/x86: mlx-platform: Add support for new capability register
2020-01-12 12:18 [PATCH platform-next v2 00/10] platform/x86: Mellanox new system classes and new features Vadim Pasternak
` (6 preceding siblings ...)
2020-01-12 12:18 ` [PATCH platform-next v2 07/10] platform/x86: mlx-platform: Add support for new " Vadim Pasternak
@ 2020-01-12 12:18 ` Vadim Pasternak
2020-01-12 12:18 ` [PATCH platform-next v2 09/10] platform/mellanox: mlxreg-hotplug: " Vadim Pasternak
2020-01-12 12:18 ` [PATCH platform-next v2 10/10] platform/x86: mlx-platform: Add support for next generation systems Vadim Pasternak
9 siblings, 0 replies; 13+ messages in thread
From: Vadim Pasternak @ 2020-01-12 12:18 UTC (permalink / raw)
To: andy, dvhart; +Cc: platform-driver-x86, linux-kernel, Vadim Pasternak
Add support for capability register, which contains information about
the number of PS units equipped on the system and about minimum I2C
frequency supported by the all system's I2C devices.
Utilization of this register allows to avoid necessity of providing new
system description, in case it differs in number of PS units or in
minimal I2C frequency.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
---
drivers/platform/x86/mlx-platform.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/platform/x86/mlx-platform.c b/drivers/platform/x86/mlx-platform.c
index 31c04ee53989..ac789f98c8b8 100644
--- a/drivers/platform/x86/mlx-platform.c
+++ b/drivers/platform/x86/mlx-platform.c
@@ -90,6 +90,7 @@
#define MLXPLAT_CPLD_LPC_REG_FAN_CAP2_OFFSET 0xf6
#define MLXPLAT_CPLD_LPC_REG_FAN_DRW_CAP_OFFSET 0xf7
#define MLXPLAT_CPLD_LPC_REG_TACHO_SPEED_OFFSET 0xf8
+#define MLXPLAT_CPLD_LPC_REG_PSU_I2C_CAP_OFFSET 0xf9
#define MLXPLAT_CPLD_LPC_REG_CONFIG1_OFFSET 0xfb
#define MLXPLAT_CPLD_LPC_REG_CONFIG2_OFFSET 0xfc
#define MLXPLAT_CPLD_LPC_IO_RANGE 0x100
@@ -123,12 +124,16 @@
#define MLXPLAT_CPLD_LOW_AGGR_MASK_I2C BIT(6)
#define MLXPLAT_CPLD_PSU_MASK GENMASK(1, 0)
#define MLXPLAT_CPLD_PWR_MASK GENMASK(1, 0)
+#define MLXPLAT_CPLD_PSU_EXT_MASK GENMASK(3, 0)
+#define MLXPLAT_CPLD_PWR_EXT_MASK GENMASK(3, 0)
#define MLXPLAT_CPLD_FAN_MASK GENMASK(3, 0)
#define MLXPLAT_CPLD_ASIC_MASK GENMASK(1, 0)
#define MLXPLAT_CPLD_FAN_NG_MASK GENMASK(5, 0)
#define MLXPLAT_CPLD_LED_LO_NIBBLE_MASK GENMASK(7, 4)
#define MLXPLAT_CPLD_LED_HI_NIBBLE_MASK GENMASK(3, 0)
#define MLXPLAT_CPLD_VOLTREG_UPD_MASK GENMASK(5, 4)
+#define MLXPLAT_CPLD_I2C_CAP_BIT 0x04
+#define MLXPLAT_CPLD_I2C_CAP_MASK GENMASK(5, MLXPLAT_CPLD_I2C_CAP_BIT)
/* Masks for aggregation for comex carriers */
#define MLXPLAT_CPLD_AGGR_MASK_CARRIER BIT(1)
@@ -1937,6 +1942,7 @@ static bool mlxplat_mlxcpld_readable_reg(struct device *dev, unsigned int reg)
case MLXPLAT_CPLD_LPC_REG_FAN_CAP2_OFFSET:
case MLXPLAT_CPLD_LPC_REG_FAN_DRW_CAP_OFFSET:
case MLXPLAT_CPLD_LPC_REG_TACHO_SPEED_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_PSU_I2C_CAP_OFFSET:
case MLXPLAT_CPLD_LPC_REG_CONFIG1_OFFSET:
case MLXPLAT_CPLD_LPC_REG_CONFIG2_OFFSET:
case MLXPLAT_CPLD_LPC_REG_UFM_VERSION_OFFSET:
@@ -2007,6 +2013,7 @@ static bool mlxplat_mlxcpld_volatile_reg(struct device *dev, unsigned int reg)
case MLXPLAT_CPLD_LPC_REG_FAN_CAP2_OFFSET:
case MLXPLAT_CPLD_LPC_REG_FAN_DRW_CAP_OFFSET:
case MLXPLAT_CPLD_LPC_REG_TACHO_SPEED_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_PSU_I2C_CAP_OFFSET:
case MLXPLAT_CPLD_LPC_REG_CONFIG1_OFFSET:
case MLXPLAT_CPLD_LPC_REG_CONFIG2_OFFSET:
case MLXPLAT_CPLD_LPC_REG_UFM_VERSION_OFFSET:
--
2.11.0
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH platform-next v2 09/10] platform/mellanox: mlxreg-hotplug: Add support for new capability register
2020-01-12 12:18 [PATCH platform-next v2 00/10] platform/x86: Mellanox new system classes and new features Vadim Pasternak
` (7 preceding siblings ...)
2020-01-12 12:18 ` [PATCH platform-next v2 08/10] platform/x86: mlx-platform: Add support for new capability register Vadim Pasternak
@ 2020-01-12 12:18 ` Vadim Pasternak
2020-01-12 12:18 ` [PATCH platform-next v2 10/10] platform/x86: mlx-platform: Add support for next generation systems Vadim Pasternak
9 siblings, 0 replies; 13+ messages in thread
From: Vadim Pasternak @ 2020-01-12 12:18 UTC (permalink / raw)
To: andy, dvhart; +Cc: platform-driver-x86, linux-kernel, Vadim Pasternak
Add support for capability register, which is used for detection of the
actual number of interrupt capable components within the particular
group, supported by the specific system.
Such components could be for example the number of power units and
interrupts related to these units.
The motivation is to avoid adding a new code in the future in order to
distinct between the systems type supported different number of the
components like power supplies, FANs, ASICs, line cards.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
---
drivers/platform/mellanox/mlxreg-hotplug.c | 14 ++++++++++++++
include/linux/platform_data/mlxreg.h | 2 ++
2 files changed, 16 insertions(+)
diff --git a/drivers/platform/mellanox/mlxreg-hotplug.c b/drivers/platform/mellanox/mlxreg-hotplug.c
index 706207d192ae..77be37a1fbcf 100644
--- a/drivers/platform/mellanox/mlxreg-hotplug.c
+++ b/drivers/platform/mellanox/mlxreg-hotplug.c
@@ -504,6 +504,20 @@ static int mlxreg_hotplug_set_irq(struct mlxreg_hotplug_priv_data *priv)
item = pdata->items;
for (i = 0; i < pdata->counter; i++, item++) {
+ if (item->capability) {
+ /*
+ * Read group capability register to get actual number
+ * of interrupt capable components and set group mask
+ * accordingly.
+ */
+ ret = regmap_read(priv->regmap, item->capability,
+ ®val);
+ if (ret)
+ goto out;
+
+ item->mask = GENMASK((regval & item->mask) - 1, 0);
+ }
+
/* Clear group presense event. */
ret = regmap_write(priv->regmap, item->reg +
MLXREG_HOTPLUG_EVENT_OFF, 0);
diff --git a/include/linux/platform_data/mlxreg.h b/include/linux/platform_data/mlxreg.h
index 6d54fe3bcac9..b8da8aef2446 100644
--- a/include/linux/platform_data/mlxreg.h
+++ b/include/linux/platform_data/mlxreg.h
@@ -101,6 +101,7 @@ struct mlxreg_core_data {
* @aggr_mask: group aggregation mask;
* @reg: group interrupt status register;
* @mask: group interrupt mask;
+ * @capability: group capability register;
* @cache: last status value for elements fro the same group;
* @count: number of available elements in the group;
* @ind: element's index inside the group;
@@ -112,6 +113,7 @@ struct mlxreg_core_item {
u32 aggr_mask;
u32 reg;
u32 mask;
+ u32 capability;
u32 cache;
u8 count;
u8 ind;
--
2.11.0
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH platform-next v2 10/10] platform/x86: mlx-platform: Add support for next generation systems
2020-01-12 12:18 [PATCH platform-next v2 00/10] platform/x86: Mellanox new system classes and new features Vadim Pasternak
` (8 preceding siblings ...)
2020-01-12 12:18 ` [PATCH platform-next v2 09/10] platform/mellanox: mlxreg-hotplug: " Vadim Pasternak
@ 2020-01-12 12:18 ` Vadim Pasternak
9 siblings, 0 replies; 13+ messages in thread
From: Vadim Pasternak @ 2020-01-12 12:18 UTC (permalink / raw)
To: andy, dvhart; +Cc: platform-driver-x86, linux-kernel, Vadim Pasternak
Add support for new Mellanox system types of basic class VMOD0010,
containing new Mellanox systems equipped with new switch device
Spectrum 3 (32x400GbE/64x200G/128x100G Ethernet switch).
These are the Top of the Rack 1U/2U/4U systems, equipped with
Mellanox Comex card and with the switch board with Mellanox Spectrum-3
device.
This class of devices can be equipped with two PS units for 1U/2U or
with four PS units for 4U systems.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
---
drivers/platform/x86/mlx-platform.c | 180 ++++++++++++++++++++++++++++++++++++
1 file changed, 180 insertions(+)
diff --git a/drivers/platform/x86/mlx-platform.c b/drivers/platform/x86/mlx-platform.c
index ac789f98c8b8..c27548fd386a 100644
--- a/drivers/platform/x86/mlx-platform.c
+++ b/drivers/platform/x86/mlx-platform.c
@@ -163,6 +163,7 @@
#define MLXPLAT_CPLD_NR_NONE -1
#define MLXPLAT_CPLD_PSU_DEFAULT_NR 10
#define MLXPLAT_CPLD_PSU_MSNXXXX_NR 4
+#define MLXPLAT_CPLD_PSU_MSNXXXX_NR2 3
#define MLXPLAT_CPLD_FAN1_DEFAULT_NR 11
#define MLXPLAT_CPLD_FAN2_DEFAULT_NR 12
#define MLXPLAT_CPLD_FAN3_DEFAULT_NR 13
@@ -212,8 +213,24 @@ static const struct resource mlxplat_lpc_resources[] = {
IORESOURCE_IO),
};
+/* Platform i2c next generation systems data */
+static struct mlxreg_core_data mlxplat_mlxcpld_i2c_ng_items_data[] = {
+ {
+ .reg = MLXPLAT_CPLD_LPC_REG_PSU_I2C_CAP_OFFSET,
+ .mask = MLXPLAT_CPLD_I2C_CAP_MASK,
+ .bit = MLXPLAT_CPLD_I2C_CAP_BIT,
+ },
+};
+
+static struct mlxreg_core_item mlxplat_mlxcpld_i2c_ng_items[] = {
+ {
+ .data = mlxplat_mlxcpld_i2c_ng_items_data,
+ },
+};
+
/* Platform next generation systems i2c data */
static struct mlxreg_core_hotplug_platform_data mlxplat_mlxcpld_i2c_ng_data = {
+ .items = mlxplat_mlxcpld_i2c_ng_items,
.cell = MLXPLAT_CPLD_LPC_REG_AGGR_OFFSET,
.mask = MLXPLAT_CPLD_AGGR_MASK_COMEX,
.cell_low = MLXPLAT_CPLD_LPC_REG_AGGRCO_OFFSET,
@@ -847,6 +864,116 @@ struct mlxreg_core_hotplug_platform_data mlxplat_mlxcpld_default_ng_data = {
.mask_low = MLXPLAT_CPLD_LOW_AGGR_MASK_LOW,
};
+/* Platform hotplug extended system family data */
+static struct mlxreg_core_data mlxplat_mlxcpld_ext_psu_items_data[] = {
+ {
+ .label = "psu1",
+ .reg = MLXPLAT_CPLD_LPC_REG_PSU_OFFSET,
+ .mask = BIT(0),
+ .hpdev.nr = MLXPLAT_CPLD_NR_NONE,
+ },
+ {
+ .label = "psu2",
+ .reg = MLXPLAT_CPLD_LPC_REG_PSU_OFFSET,
+ .mask = BIT(1),
+ .hpdev.nr = MLXPLAT_CPLD_NR_NONE,
+ },
+ {
+ .label = "psu3",
+ .reg = MLXPLAT_CPLD_LPC_REG_PSU_OFFSET,
+ .mask = BIT(2),
+ .hpdev.nr = MLXPLAT_CPLD_NR_NONE,
+ },
+ {
+ .label = "psu4",
+ .reg = MLXPLAT_CPLD_LPC_REG_PSU_OFFSET,
+ .mask = BIT(3),
+ .hpdev.nr = MLXPLAT_CPLD_NR_NONE,
+ },
+};
+
+static struct mlxreg_core_data mlxplat_mlxcpld_ext_pwr_items_data[] = {
+ {
+ .label = "pwr1",
+ .reg = MLXPLAT_CPLD_LPC_REG_PWR_OFFSET,
+ .mask = BIT(0),
+ .hpdev.brdinfo = &mlxplat_mlxcpld_pwr[0],
+ .hpdev.nr = MLXPLAT_CPLD_PSU_MSNXXXX_NR,
+ },
+ {
+ .label = "pwr2",
+ .reg = MLXPLAT_CPLD_LPC_REG_PWR_OFFSET,
+ .mask = BIT(1),
+ .hpdev.brdinfo = &mlxplat_mlxcpld_pwr[1],
+ .hpdev.nr = MLXPLAT_CPLD_PSU_MSNXXXX_NR,
+ },
+ {
+ .label = "pwr3",
+ .reg = MLXPLAT_CPLD_LPC_REG_PWR_OFFSET,
+ .mask = BIT(2),
+ .hpdev.brdinfo = &mlxplat_mlxcpld_pwr[0],
+ .hpdev.nr = MLXPLAT_CPLD_PSU_MSNXXXX_NR2,
+ },
+ {
+ .label = "pwr4",
+ .reg = MLXPLAT_CPLD_LPC_REG_PWR_OFFSET,
+ .mask = BIT(3),
+ .hpdev.brdinfo = &mlxplat_mlxcpld_pwr[1],
+ .hpdev.nr = MLXPLAT_CPLD_PSU_MSNXXXX_NR2,
+ },
+};
+
+static struct mlxreg_core_item mlxplat_mlxcpld_ext_items[] = {
+ {
+ .data = mlxplat_mlxcpld_ext_psu_items_data,
+ .aggr_mask = MLXPLAT_CPLD_AGGR_MASK_NG_DEF,
+ .reg = MLXPLAT_CPLD_LPC_REG_PSU_OFFSET,
+ .mask = MLXPLAT_CPLD_PSU_EXT_MASK,
+ .capability = MLXPLAT_CPLD_LPC_REG_PSU_I2C_CAP_OFFSET,
+ .count = ARRAY_SIZE(mlxplat_mlxcpld_ext_psu_items_data),
+ .inversed = 1,
+ .health = false,
+ },
+ {
+ .data = mlxplat_mlxcpld_ext_pwr_items_data,
+ .aggr_mask = MLXPLAT_CPLD_AGGR_MASK_NG_DEF,
+ .reg = MLXPLAT_CPLD_LPC_REG_PWR_OFFSET,
+ .mask = MLXPLAT_CPLD_PWR_EXT_MASK,
+ .capability = MLXPLAT_CPLD_LPC_REG_PSU_I2C_CAP_OFFSET,
+ .count = ARRAY_SIZE(mlxplat_mlxcpld_ext_pwr_items_data),
+ .inversed = 0,
+ .health = false,
+ },
+ {
+ .data = mlxplat_mlxcpld_default_ng_fan_items_data,
+ .aggr_mask = MLXPLAT_CPLD_AGGR_MASK_NG_DEF,
+ .reg = MLXPLAT_CPLD_LPC_REG_FAN_OFFSET,
+ .mask = MLXPLAT_CPLD_FAN_NG_MASK,
+ .count = ARRAY_SIZE(mlxplat_mlxcpld_default_ng_fan_items_data),
+ .inversed = 1,
+ .health = false,
+ },
+ {
+ .data = mlxplat_mlxcpld_default_asic_items_data,
+ .aggr_mask = MLXPLAT_CPLD_AGGR_MASK_NG_DEF,
+ .reg = MLXPLAT_CPLD_LPC_REG_ASIC_HEALTH_OFFSET,
+ .mask = MLXPLAT_CPLD_ASIC_MASK,
+ .count = ARRAY_SIZE(mlxplat_mlxcpld_default_asic_items_data),
+ .inversed = 0,
+ .health = true,
+ },
+};
+
+static
+struct mlxreg_core_hotplug_platform_data mlxplat_mlxcpld_ext_data = {
+ .items = mlxplat_mlxcpld_ext_items,
+ .counter = ARRAY_SIZE(mlxplat_mlxcpld_ext_items),
+ .cell = MLXPLAT_CPLD_LPC_REG_AGGR_OFFSET,
+ .mask = MLXPLAT_CPLD_AGGR_MASK_NG_DEF | MLXPLAT_CPLD_AGGR_MASK_COMEX,
+ .cell_low = MLXPLAT_CPLD_LPC_REG_AGGRLO_OFFSET,
+ .mask_low = MLXPLAT_CPLD_LOW_AGGR_MASK_LOW,
+};
+
/* Platform led default data */
static struct mlxreg_core_data mlxplat_mlxcpld_default_led_data[] = {
{
@@ -2040,6 +2167,13 @@ static const struct reg_default mlxplat_mlxcpld_regmap_comex_default[] = {
{ MLXPLAT_CPLD_LPC_REG_PWM_CONTROL_OFFSET, 0x00 },
};
+static const struct reg_default mlxplat_mlxcpld_regmap_ng400[] = {
+ { MLXPLAT_CPLD_LPC_REG_PWM_CONTROL_OFFSET, 0x00 },
+ { MLXPLAT_CPLD_LPC_REG_WD1_ACT_OFFSET, 0x00 },
+ { MLXPLAT_CPLD_LPC_REG_WD2_ACT_OFFSET, 0x00 },
+ { MLXPLAT_CPLD_LPC_REG_WD3_ACT_OFFSET, 0x00 },
+};
+
struct mlxplat_mlxcpld_regmap_context {
void __iomem *base;
};
@@ -2106,6 +2240,20 @@ static const struct regmap_config mlxplat_mlxcpld_regmap_config_comex = {
.reg_write = mlxplat_mlxcpld_reg_write,
};
+static const struct regmap_config mlxplat_mlxcpld_regmap_config_ng400 = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = 255,
+ .cache_type = REGCACHE_FLAT,
+ .writeable_reg = mlxplat_mlxcpld_writeable_reg,
+ .readable_reg = mlxplat_mlxcpld_readable_reg,
+ .volatile_reg = mlxplat_mlxcpld_volatile_reg,
+ .reg_defaults = mlxplat_mlxcpld_regmap_ng400,
+ .num_reg_defaults = ARRAY_SIZE(mlxplat_mlxcpld_regmap_ng400),
+ .reg_read = mlxplat_mlxcpld_reg_read,
+ .reg_write = mlxplat_mlxcpld_reg_write,
+};
+
static struct resource mlxplat_mlxcpld_resources[] = {
[0] = DEFINE_RES_IRQ_NAMED(17, "mlxreg-hotplug"),
};
@@ -2258,6 +2406,32 @@ static int __init mlxplat_dmi_comex_matched(const struct dmi_system_id *dmi)
return 1;
}
+static int __init mlxplat_dmi_ng400_matched(const struct dmi_system_id *dmi)
+{
+ int i;
+
+ mlxplat_max_adap_num = MLXPLAT_CPLD_MAX_PHYS_ADAPTER_NUM;
+ mlxplat_mux_num = ARRAY_SIZE(mlxplat_default_mux_data);
+ mlxplat_mux_data = mlxplat_default_mux_data;
+ for (i = 0; i < mlxplat_mux_num; i++) {
+ mlxplat_mux_data[i].values = mlxplat_msn21xx_channels;
+ mlxplat_mux_data[i].n_values =
+ ARRAY_SIZE(mlxplat_msn21xx_channels);
+ }
+ mlxplat_hotplug = &mlxplat_mlxcpld_ext_data;
+ mlxplat_hotplug->deferred_nr =
+ mlxplat_msn21xx_channels[MLXPLAT_CPLD_GRP_CHNL_NUM - 1];
+ mlxplat_led = &mlxplat_default_ng_led_data;
+ mlxplat_regs_io = &mlxplat_default_ng_regs_io_data;
+ mlxplat_fan = &mlxplat_default_fan_data;
+ for (i = 0; i < ARRAY_SIZE(mlxplat_mlxcpld_wd_set_type2); i++)
+ mlxplat_wd_data[i] = &mlxplat_mlxcpld_wd_set_type2[i];
+ mlxplat_i2c = &mlxplat_mlxcpld_i2c_ng_data;
+ mlxplat_regmap_config = &mlxplat_mlxcpld_regmap_config_ng400;
+
+ return 1;
+}
+
static const struct dmi_system_id mlxplat_dmi_table[] __initconst = {
{
.callback = mlxplat_dmi_default_matched,
@@ -2302,6 +2476,12 @@ static const struct dmi_system_id mlxplat_dmi_table[] __initconst = {
},
},
{
+ .callback = mlxplat_dmi_ng400_matched,
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "VMOD0010"),
+ },
+ },
+ {
.callback = mlxplat_dmi_msn274x_matched,
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Mellanox Technologies"),
--
2.11.0
^ permalink raw reply related [flat|nested] 13+ messages in thread