* [PATCH v3 0/3] iio: gyro: adxrs290: Add triggered buffer & debugfs support
@ 2020-09-10 12:29 Nishant Malpani
2020-09-10 13:51 ` Andy Shevchenko
2020-09-10 17:46 ` Jonathan Cameron
0 siblings, 2 replies; 3+ messages in thread
From: Nishant Malpani @ 2020-09-10 12:29 UTC (permalink / raw)
To: jic23; +Cc: linux-kernel, linux-iio, andy.shevchenko, Nishant Malpani
Introduce DATA_RDY trigger for triggered buffer setup; this enables continuous
data capture. Additionally, add support for direct register access using the debugfs
iio interface.
The device-tree bindings documentation illustrates an example of using a GPIO irq
line to trigger a data capture.
Nishant Malpani (3):
iio: gyro: adxrs290: Add triggered buffer support
dt-bindings: iio: gyro: adxrs290: Add interrupts support
iio: gyro: adxrs290: Add debugfs register access support
.../bindings/iio/gyroscope/adi,adxrs290.yaml | 6 +
drivers/iio/gyro/Kconfig | 2 +
drivers/iio/gyro/adxrs290.c | 237 ++++++++++++++++--
3 files changed, 231 insertions(+), 14 deletions(-)
--
2.20.1
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v3 0/3] iio: gyro: adxrs290: Add triggered buffer & debugfs support
2020-09-10 12:29 [PATCH v3 0/3] iio: gyro: adxrs290: Add triggered buffer & debugfs support Nishant Malpani
@ 2020-09-10 13:51 ` Andy Shevchenko
2020-09-10 17:46 ` Jonathan Cameron
1 sibling, 0 replies; 3+ messages in thread
From: Andy Shevchenko @ 2020-09-10 13:51 UTC (permalink / raw)
To: Nishant Malpani; +Cc: Jonathan Cameron, Linux Kernel Mailing List, linux-iio
On Thu, Sep 10, 2020 at 3:30 PM Nishant Malpani
<nish.malpani25@gmail.com> wrote:
>
> Introduce DATA_RDY trigger for triggered buffer setup; this enables continuous
> data capture. Additionally, add support for direct register access using the debugfs
> iio interface.
>
> The device-tree bindings documentation illustrates an example of using a GPIO irq
> line to trigger a data capture.
>
Patches 1 and 3 looks good to me now
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> Nishant Malpani (3):
> iio: gyro: adxrs290: Add triggered buffer support
> dt-bindings: iio: gyro: adxrs290: Add interrupts support
> iio: gyro: adxrs290: Add debugfs register access support
>
> .../bindings/iio/gyroscope/adi,adxrs290.yaml | 6 +
> drivers/iio/gyro/Kconfig | 2 +
> drivers/iio/gyro/adxrs290.c | 237 ++++++++++++++++--
> 3 files changed, 231 insertions(+), 14 deletions(-)
>
> --
> 2.20.1
>
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v3 0/3] iio: gyro: adxrs290: Add triggered buffer & debugfs support
2020-09-10 12:29 [PATCH v3 0/3] iio: gyro: adxrs290: Add triggered buffer & debugfs support Nishant Malpani
2020-09-10 13:51 ` Andy Shevchenko
@ 2020-09-10 17:46 ` Jonathan Cameron
1 sibling, 0 replies; 3+ messages in thread
From: Jonathan Cameron @ 2020-09-10 17:46 UTC (permalink / raw)
To: Nishant Malpani; +Cc: jic23, linux-kernel, linux-iio, andy.shevchenko
On Thu, 10 Sep 2020 17:59:57 +0530
Nishant Malpani <nish.malpani25@gmail.com> wrote:
> Introduce DATA_RDY trigger for triggered buffer setup; this enables continuous
> data capture. Additionally, add support for direct register access using the debugfs
> iio interface.
>
> The device-tree bindings documentation illustrates an example of using a GPIO irq
> line to trigger a data capture.
>
> Nishant Malpani (3):
> iio: gyro: adxrs290: Add triggered buffer support
> dt-bindings: iio: gyro: adxrs290: Add interrupts support
> iio: gyro: adxrs290: Add debugfs register access support
>
> .../bindings/iio/gyroscope/adi,adxrs290.yaml | 6 +
> drivers/iio/gyro/Kconfig | 2 +
> drivers/iio/gyro/adxrs290.c | 237 ++++++++++++++++--
> 3 files changed, 231 insertions(+), 14 deletions(-)
>
Hi Nishant,
Something odd went on with this version. It's not come across threaded
and patch 1 is missing. Please resend.
Thanks,
Jonathan
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-09-10 21:33 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-09-10 12:29 [PATCH v3 0/3] iio: gyro: adxrs290: Add triggered buffer & debugfs support Nishant Malpani
2020-09-10 13:51 ` Andy Shevchenko
2020-09-10 17:46 ` Jonathan Cameron
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).