From: Andy Shevchenko <andy.shevchenko@gmail.com>
To: Robert Marko <robert.marko@sartura.hr>
Cc: Linus Walleij <linus.walleij@linaro.org>,
Bartosz Golaszewski <bgolaszewski@baylibre.com>,
Rob Herring <robh+dt@kernel.org>,
Lee Jones <lee.jones@linaro.org>,
"open list:GPIO SUBSYSTEM" <linux-gpio@vger.kernel.org>,
devicetree <devicetree@vger.kernel.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Luka Perkov <luka.perkov@sartura.hr>,
jmp@epiphyte.org, Paul Menzel <pmenzel@molgen.mpg.de>,
buczek@molgen.mpg.de
Subject: Re: [PATCH v2 2/4] gpio: Add Delta TN48M CPLD GPIO driver
Date: Mon, 24 May 2021 15:44:05 +0300 [thread overview]
Message-ID: <CAHp75VfuLVWLK1m8f3kRdiVHcZFAvZ3iXmNM1awqZjxN_xeOKQ@mail.gmail.com> (raw)
In-Reply-To: <20210524120539.3267145-2-robert.marko@sartura.hr>
On Mon, May 24, 2021 at 3:06 PM Robert Marko <robert.marko@sartura.hr> wrote:
>
> Delta TN48M CPLD is used as a GPIO expander for the SFP GPIOs.
>
> It is a mix of input only and output only pins.
LGTM!
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> Signed-off-by: Robert Marko <robert.marko@sartura.hr>
> ---
> Changes in v2:
> * Rewrite to use simple I2C MFD and GPIO regmap
> * Drop DT bindings for pin numbering
>
> drivers/gpio/Kconfig | 12 ++++++
> drivers/gpio/Makefile | 1 +
> drivers/gpio/gpio-tn48m.c | 89 +++++++++++++++++++++++++++++++++++++++
> 3 files changed, 102 insertions(+)
> create mode 100644 drivers/gpio/gpio-tn48m.c
>
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index 1dd0ec6727fd..46caf72960e6 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -1332,6 +1332,18 @@ config GPIO_TIMBERDALE
> help
> Add support for the GPIO IP in the timberdale FPGA.
>
> +config GPIO_TN48M_CPLD
> + tristate "Delta Networks TN48M switch CPLD GPIO driver"
> + depends on MFD_TN48M_CPLD
> + select GPIO_REGMAP
> + help
> + This enables support for the GPIOs found on the Delta
> + Networks TN48M switch CPLD.
> + They are used for inputs and outputs on the SFP slots.
> +
> + This driver can also be built as a module. If so, the
> + module will be called gpio-tn48m.
> +
> config GPIO_TPS65086
> tristate "TI TPS65086 GPO"
> depends on MFD_TPS65086
> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
> index d7c81e1611a4..07fa6419305f 100644
> --- a/drivers/gpio/Makefile
> +++ b/drivers/gpio/Makefile
> @@ -147,6 +147,7 @@ obj-$(CONFIG_GPIO_TEGRA186) += gpio-tegra186.o
> obj-$(CONFIG_GPIO_TEGRA) += gpio-tegra.o
> obj-$(CONFIG_GPIO_THUNDERX) += gpio-thunderx.o
> obj-$(CONFIG_GPIO_TIMBERDALE) += gpio-timberdale.o
> +obj-$(CONFIG_GPIO_TN48M_CPLD) += gpio-tn48m.o
> obj-$(CONFIG_GPIO_TPIC2810) += gpio-tpic2810.o
> obj-$(CONFIG_GPIO_TPS65086) += gpio-tps65086.o
> obj-$(CONFIG_GPIO_TPS65218) += gpio-tps65218.o
> diff --git a/drivers/gpio/gpio-tn48m.c b/drivers/gpio/gpio-tn48m.c
> new file mode 100644
> index 000000000000..41484c002826
> --- /dev/null
> +++ b/drivers/gpio/gpio-tn48m.c
> @@ -0,0 +1,89 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Delta TN48M CPLD GPIO driver
> + *
> + * Copyright 2021 Sartura Ltd
> + *
> + * Author: Robert Marko <robert.marko@sartura.hr>
> + */
> +
> +#include <linux/device.h>
> +#include <linux/gpio/driver.h>
> +#include <linux/gpio/regmap.h>
> +#include <linux/kernel.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +
> +enum tn48m_gpio_type {
> + TN48M_SFP_TX_DISABLE = 1,
> + TN48M_SFP_PRESENT,
> + TN48M_SFP_LOS,
> +};
> +
> +static int tn48m_gpio_probe(struct platform_device *pdev)
> +{
> + struct gpio_regmap_config config = {0};
> + enum tn48m_gpio_type type;
> + struct regmap *regmap;
> + u32 base;
> + int ret;
> +
> + if (!pdev->dev.parent)
> + return -ENODEV;
> +
> + type = (uintptr_t)device_get_match_data(&pdev->dev);
> + if (!type)
> + return -ENODEV;
> +
> + ret = device_property_read_u32(&pdev->dev, "reg", &base);
> + if (ret)
> + return -EINVAL;
> +
> + regmap = dev_get_regmap(pdev->dev.parent, NULL);
> + if (!regmap)
> + return -ENODEV;
> +
> + config.regmap = regmap;
> + config.parent = &pdev->dev;
> + config.ngpio = 4;
> +
> + switch (type) {
> + case TN48M_SFP_TX_DISABLE:
> + config.reg_set_base = base;
> + break;
> + case TN48M_SFP_PRESENT:
> + config.reg_dat_base = base;
> + break;
> + case TN48M_SFP_LOS:
> + config.reg_dat_base = base;
> + break;
> + default:
> + dev_err(&pdev->dev, "unknown type %d\n", type);
> + return -ENODEV;
> + }
> +
> + return PTR_ERR_OR_ZERO(devm_gpio_regmap_register(&pdev->dev, &config));
> +}
> +
> +static const struct of_device_id tn48m_gpio_of_match[] = {
> + { .compatible = "delta,tn48m-gpio-sfp-tx-disable", .data = (void *)TN48M_SFP_TX_DISABLE },
> + { .compatible = "delta,tn48m-gpio-sfp-present", .data = (void *)TN48M_SFP_PRESENT },
> + { .compatible = "delta,tn48m-gpio-sfp-los", .data = (void *)TN48M_SFP_LOS },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, tn48m_gpio_of_match);
> +
> +static struct platform_driver tn48m_gpio_driver = {
> + .driver = {
> + .name = "delta-tn48m-gpio",
> + .of_match_table = tn48m_gpio_of_match,
> + },
> + .probe = tn48m_gpio_probe,
> +};
> +module_platform_driver(tn48m_gpio_driver);
> +
> +MODULE_AUTHOR("Robert Marko <robert.marko@sartura.hr>");
> +MODULE_DESCRIPTION("Delta TN48M CPLD GPIO driver");
> +MODULE_LICENSE("GPL");
> --
> 2.31.1
>
--
With Best Regards,
Andy Shevchenko
next prev parent reply other threads:[~2021-05-24 12:44 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-24 12:05 [PATCH v2 1/4] mfd: simple-mfd-i2c: Add Delta TN48M CPLD support Robert Marko
2021-05-24 12:05 ` [PATCH v2 2/4] gpio: Add Delta TN48M CPLD GPIO driver Robert Marko
2021-05-24 12:44 ` Andy Shevchenko [this message]
2021-05-25 14:41 ` Bartosz Golaszewski
2021-05-28 0:37 ` Linus Walleij
2021-05-24 12:05 ` [PATCH v2 3/4] dt-bindings: mfd: Add Delta TN48M CPLD drivers bindings Robert Marko
2021-05-24 23:09 ` Rob Herring
2021-05-25 7:46 ` Lee Jones
2021-05-25 9:34 ` Robert Marko
2021-05-26 7:52 ` Lee Jones
2021-05-31 8:42 ` Robert Marko
2021-06-01 8:19 ` Lee Jones
2021-06-01 8:22 ` Lee Jones
2021-06-01 9:10 ` Robert Marko
2021-06-01 9:31 ` Lee Jones
2021-06-01 10:09 ` Robert Marko
2021-06-01 9:06 ` Robert Marko
2021-06-01 9:12 ` Lee Jones
2021-06-01 13:54 ` Michael Walle
2021-06-01 13:57 ` Robert Marko
2021-06-01 13:58 ` Lee Jones
2021-06-01 14:48 ` Lee Jones
2021-06-02 9:12 ` Robert Marko
2021-06-02 10:03 ` Lee Jones
2021-06-02 10:22 ` Michael Walle
2021-06-02 10:44 ` Lee Jones
2021-05-25 9:46 ` Robert Marko
2021-05-25 21:43 ` Rob Herring
2021-05-31 13:08 ` Robert Marko
2021-05-24 12:05 ` [PATCH v2 4/4] MAINTAINERS: Add Delta Networks TN48M CPLD drivers Robert Marko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAHp75VfuLVWLK1m8f3kRdiVHcZFAvZ3iXmNM1awqZjxN_xeOKQ@mail.gmail.com \
--to=andy.shevchenko@gmail.com \
--cc=bgolaszewski@baylibre.com \
--cc=buczek@molgen.mpg.de \
--cc=devicetree@vger.kernel.org \
--cc=jmp@epiphyte.org \
--cc=lee.jones@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luka.perkov@sartura.hr \
--cc=pmenzel@molgen.mpg.de \
--cc=robert.marko@sartura.hr \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).