* [GIT PULL] Power management updates for v4.16-rc1
@ 2018-01-21 2:19 Rafael J. Wysocki
0 siblings, 0 replies; only message in thread
From: Rafael J. Wysocki @ 2018-01-21 2:19 UTC (permalink / raw)
To: Linus Torvalds
Cc: Linux PM, ACPI Devel Maling List, Linux PCI, Linux Kernel Mailing List
Hi Linus,
This goes early, because I'm attending the LCA next week and I may be
sparsely available and generally time-constrained during the next
several days.
In case you decide to open the 4.16 merge window any time soon, please
pull from the tag
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git \
pm-4.16-rc1
with top-most commit ee43730d65155c5b3c3d0531f11daf59f8f42a73
Merge branches 'pm-opp', 'pm-devfreq', 'pm-avs' and 'pm-tools'
on top of commit a8750ddca918032d6349adbf9a4b6555e7db20da
Linux 4.15-rc8
to receive power management updates for 4.16-rc1.
This includes some infrastructure changes in the PM core, mostly
related to integration between runtime PM and system-wide suspend
and hibernation, plus some driver changes depending on them and
fixes for issues in that area which have become quite apparent
recently.
Also included are changes making more x86-based systems use the Low
Power Sleep S0 _DSM interface by default, which turned out to be
necessary to handle power button wakeups from suspend-to-idle on
Surface Pro3.
On the cpufreq front we have fixes and cleanups in the core, some
new hardware support, driver updates and the removal of some unused
code from the CPU cooling thermal driver.
Apart from this, the Operating Performance Points (OPP) framework
is prepared to be used with power domains in the future and there
is a usual bunch of assorted fixes and cleanups.
Specifics:
- Define a PM driver flag allowing drivers to request that their
devices be left in suspend after system-wide transitions to the
working state if possible and add support for it to the PCI bus
type and the ACPI PM domain (Rafael Wysocki).
- Make the PM core carry out optimizations for devices with driver
PM flags set in some cases and make a few drivers set those flags
(Rafael Wysocki).
- Fix and clean up wrapper routines allowing runtime PM device
callbacks to be re-used for system-wide PM, change the generic
power domains (genpd) framework to stop using those routines
incorrectly and fix up a driver depending on that behavior of
genpd (Rafael Wysocki, Ulf Hansson, Geert Uytterhoeven).
- Fix and clean up the PM core's device wakeup framework and
re-factor system-wide PM core code related to device wakeup
(Rafael Wysocki, Ulf Hansson, Brian Norris).
- Make more x86-based systems use the Low Power Sleep S0 _DSM
interface by default (to fix power button wakeup from
suspend-to-idle on Surface Pro3) and add a kernel command line
switch to tell it to ignore the system sleep blacklist in the
ACPI core (Rafael Wysocki).
- Fix a race condition related to cpufreq governor module removal
and clean up the governor management code in the cpufreq core
(Rafael Wysocki).
- Drop the unused generic code related to the handling of the static
power energy usage model in the CPU cooling thermal driver along
with the corresponding documentation (Viresh Kumar).
- Add mt2712 support to the Mediatek cpufreq driver (Andrew-sh Cheng).
- Add a new operating point to the imx6ul and imx6q cpufreq drivers
and switch the latter to using clk_bulk_get() (Anson Huang, Dong
Aisheng).
- Add support for multiple regulators to the TI cpufreq driver along
with a new DT binding related to that and clean up that driver
somewhat (Dave Gerlach).
- Fix a powernv cpufreq driver regression leading to incorrect CPU
frequency reporting, fix that driver to deal with non-continguous
P-states correctly and clean it up (Gautham Shenoy, Shilpasri Bhat).
- Add support for frequency scaling on Armada 37xx SoCs through the
generic DT cpufreq driver (Gregory CLEMENT).
- Fix error code paths in the mvebu cpufreq driver (Gregory CLEMENT).
- Fix a transition delay setting regression in the longhaul cpufreq
driver (Viresh Kumar).
- Add Skylake X (server) support to the intel_pstate cpufreq driver
and clean up that driver somewhat (Srinivas Pandruvada).
- Clean up the cpufreq statistics collection code (Viresh Kumar).
- Drop cluster terminology and dependency on physical_package_id
from the PSCI driver and drop dependency on arm_big_little from
the SCPI cpufreq driver (Sudeep Holla).
- Add support for system-wide suspend and resume to the RAPL power
capping driver and drop a redundant semicolon from it (Zhen Han,
Luis de Bethencourt).
- Make SPI domain validation (in the SCSI SPI transport driver) and
system-wide suspend mutually exclusive as they rely on the same
underlying mechanism and cannot be carried out at the same time
(Bart Van Assche).
- Fix the computation of the amount of memory to preallocate in the
hibernation core and clean up one function in there (Rainer Fiebig,
Kyungsik Lee).
- Prepare the Operating Performance Points (OPP) framework for being
used with power domains and clean up one function in it (Viresh
Kumar, Wei Yongjun).
- Clean up the generic sysfs interface for device PM (Andy Shevchenko).
- Fix several minor issues in power management frameworks and clean
them up a bit (Arvind Yadav, Bjorn Andersson, Geert Uytterhoeven,
Gustavo Silva, Julia Lawall, Luis de Bethencourt, Paul Gortmaker,
Sergey Senozhatsky, gaurav jindal).
- Make it easier to disable PM via Kconfig (Mark Brown).
- Clean up the cpupower and intel_pstate_tracer utilities (Doug
Smythies, Laura Abbott).
Thanks!
---------------
Andrew-sh Cheng (2):
cpufreq: mediatek: add mt2712 into compatible list
cpufreq: mediatek: add mediatek related projects into blacklist
Andy Shevchenko (3):
PM / sysfs: Convert to use sysfs_streq()
PM / sysfs: Remove redundant 'else' keyword.
PM / sysfs: Convert to use DEVICE_ATTR_RO / DEVICE_ATTR_RW
Anson Huang (2):
ARM: dts: imx6ul: add 696MHz operating point
cpufreq: imx6q: add 696MHz operating point for i.mx6ul
Arvind Yadav (1):
powercap: Simplify powercap_init()
Bart Van Assche (2):
PM / sleep: Make lock/unlock_system_sleep() available to kernel modules
block, scsi: Fix race between SPI domain validation and system suspend
Bjorn Andersson (1):
PM / devfreq: Propagate error from devfreq_add_device()
Brian Norris (1):
PM / wakeup: only recommend "call"ing device_init_wakeup() once
Dave Gerlach (4):
cpufreq: ti-cpufreq: Convert to module_platform_driver
cpufreq: ti-cpufreq: Add support for multiple regulators
dt-bindings: opp: Introduce ti-opp-supply bindings
PM / OPP: Add ti-opp-supply driver
Dong Aisheng (1):
cpufreq: imx6q: switch to Use clk_bulk_get() to refine clk operations
Doug Smythies (1):
tools/power/x86/intel_pstate_tracer: Free the trace buffer memory
Gautham R. Shenoy (3):
powernv-cpufreq: Add helper to extract pstate from PMSR
powernv-cpufreq: Fix pstate_to_idx() to handle non-continguous pstates
powernv-cpufreq: Treat pstates as opaque 8-bit values
Geert Uytterhoeven (2):
PM / Domains: Remove obsolete "samsung,power-domain" check
dmaengine: rcar-dmac: Make DMAC reinit during system resume explicit
Gregory CLEMENT (7):
cpufreq: ARM: sort the Kconfig menu
cpufreq: sort the drivers in ARM part
cpufreq: mvebu: Free the clock reference in the normal path
cpufreq: mvebu: Free opp if registering failed
dt-bindings: marvell: Add documentation for the North Bridge PM
on Armada 37xx
MAINTAINERS: add new entries for Armada 37xx cpufreq driver
cpufreq: Add DVFS support for Armada 37xx
Gustavo A. R. Silva (1):
PM / devfreq: Fix potential NULL pointer dereference in governor_store
Julia Lawall (1):
PM / AVS: rockchip-io: account for const type of of_device_id.data
Kyungsik Lee (1):
PM / hibernate: Drop unused parameter of enough_swap
Laura Abbott (1):
cpupower: Remove FSF address
Luis de Bethencourt (2):
powercap: intel_rapl: Fix trailing semicolon
PCI / PM: Remove spurious semicolon
Mark Brown (1):
PM: Provide a config snippet for disabling PM
Paul Gortmaker (1):
bus: simple-pm-bus: convert bool SIMPLE_PM_BUS to tristate
Rafael J. Wysocki (24):
PM / core: Add LEAVE_SUSPENDED driver flag
PCI / PM: Support for LEAVE_SUSPENDED driver flag
ACPI / PM: Support for LEAVE_SUSPENDED driver flag in ACPI PM domain
ACPI / PM: Make it possible to ignore the system sleep blacklist
cpufreq: Clean up cpufreq_parse_governor()
cpufreq: Pass policy pointer to cpufreq_parse_governor()
cpufreq: Drop pointless return statement
cpufreq: Fix governor module removal race
PM / core: Use dev_pm_skip_next_resume_phases() internally
PM / wakeup: Drop redundant check from device_set_wakeup_enable()
PM / wakeup: Drop redundant check from device_init_wakeup()
PM / core: Add helpers for subsystem callback selection
PM / core: Direct DPM_FLAG_SMART_SUSPEND optimization
PM / core: Direct DPM_FLAG_LEAVE_SUSPENDED handling
PM / wakeup: Do not fail dev_pm_attach_wake_irq() unnecessarily
PCI / PM: Use SMART_SUSPEND and LEAVE_SUSPENDED flags for PCIe ports
PM / mfd: intel-lpss: Use DPM_FLAG_SMART_SUSPEND
PM: i2c-designware-platdrv: Use DPM_FLAG_SMART_PREPARE
PM: i2c-designware-platdrv: Optimize power management
ACPI / PM: Use Low Power S0 Idle on more systems
platform/x86: surfacepro3: Support for wakeup from suspend-to-idle
PM / genpd: Stop/start devices without pm_runtime_force_suspend/resume()
PM / runtime: Rework pm_runtime_force_suspend/resume()
PM / runtime: Check ignore_children in pm_runtime_need_not_resume()
Rainer Fiebig (1):
PM: hibernate: Do not subtract NR_FILE_MAPPED in minimum_image_size()
Sergey Senozhatsky (1):
PM / core: remove unneeded kallsyms include
Shilpasri G Bhat (1):
cpufreq: powernv: Dont assume distinct pstate values for nominal and pmin
Srinivas Pandruvada (2):
cpufreq: intel_pstate: Replace bxt_funcs with core_funcs
cpufreq: intel_pstate: Add Skylake servers support
Sudeep Holla (2):
drivers: psci: remove cluster terminology and dependency on
physical_package_id
cpufreq: scpi: remove arm_big_little dependency
Ulf Hansson (8):
PM / core: Re-factor some code dealing with parents in __device_suspend()
PM / core: Assign the wakeup_path status flag in __device_prepare()
PM / wakeup: Add device_set_wakeup_path() helper to control wakeup path
PM / core: Re-structure code for clearing the direct_complete flag
PM / core: Propagate wakeup_path status flag in __device_suspend_late()
PM / domains: Don't skip driver's ->suspend|resume_noirq() callbacks
PM / wakeup: Print warn if device gets enabled as wakeup source
during sleep
PM / runtime: Allow no callbacks in pm_runtime_force_suspend|resume()
Viresh Kumar (9):
cpu_cooling: Make of_cpufreq_power_cooling_register() parse DT
cpu_cooling: Remove unused cpufreq_power_cooling_register()
cpu_cooling: Keep only one of_cpufreq*cooling_register() helper
cpu_cooling: Drop static-power related stuff
cpufreq: longhaul: Revert transition_delay_us to 200 ms
OPP: Allow OPP table to be used for power-domains
OPP: Introduce "required-opp" property
cpu_cooling: Remove static-power related documentation
cpufreq: stats: Change return type of cpufreq_stats_update() as void
Wei Yongjun (1):
PM / OPP: Make local function ti_opp_supply_set_opp() static
Zhen Han (1):
powercap: add suspend and resume mechanism for SOC power limit
gaurav jindal (1):
cpuidle: Avoid NULL argument in cpuidle_switch_governor()
---------------
Documentation/admin-guide/kernel-parameters.txt | 5 +-
.../bindings/arm/marvell/armada-37xx.txt | 19 +
Documentation/devicetree/bindings/opp/opp.txt | 13 +
.../bindings/opp/ti-omap5-opp-supply.txt | 63 +++
.../devicetree/bindings/power/power_domain.txt | 65 ++++
Documentation/driver-api/pm/devices.rst | 54 ++-
Documentation/power/pci.txt | 11 +
Documentation/thermal/cpu-cooling-api.txt | 115 +-----
MAINTAINERS | 2 +
arch/arm/boot/dts/imx6ul.dtsi | 2 +
arch/x86/kernel/acpi/sleep.c | 2 +
drivers/acpi/device_pm.c | 27 +-
drivers/acpi/sleep.c | 16 +-
drivers/base/power/domain.c | 69 ++--
drivers/base/power/main.c | 415 +++++++++++++++-----
drivers/base/power/power.h | 11 +-
drivers/base/power/runtime.c | 84 ++--
drivers/base/power/sysfs.c | 182 ++++-----
drivers/base/power/wakeirq.c | 8 +-
drivers/base/power/wakeup.c | 26 +-
drivers/bus/Kconfig | 2 +-
drivers/cpufreq/Kconfig.arm | 88 +++--
drivers/cpufreq/Makefile | 9 +-
drivers/cpufreq/arm_big_little.c | 23 +-
drivers/cpufreq/armada-37xx-cpufreq.c | 241 ++++++++++++
drivers/cpufreq/cpufreq-dt-platdev.c | 8 +
drivers/cpufreq/cpufreq-dt.c | 27 +-
drivers/cpufreq/cpufreq.c | 55 +--
drivers/cpufreq/cpufreq_stats.c | 3 +-
drivers/cpufreq/imx6q-cpufreq.c | 171 +++++----
drivers/cpufreq/intel_pstate.c | 14 +-
drivers/cpufreq/longhaul.c | 2 +-
drivers/cpufreq/mediatek-cpufreq.c | 23 +-
drivers/cpufreq/mvebu-cpufreq.c | 16 +-
drivers/cpufreq/powernv-cpufreq.c | 143 ++++---
drivers/cpufreq/qoriq-cpufreq.c | 14 +-
drivers/cpufreq/scpi-cpufreq.c | 193 +++++++++-
drivers/cpufreq/ti-cpufreq.c | 51 ++-
drivers/cpuidle/governor.c | 5 +-
drivers/devfreq/devfreq.c | 5 +-
drivers/dma/sh/rcar-dmac.c | 24 +-
drivers/firmware/psci_checker.c | 46 ++-
drivers/i2c/busses/i2c-designware-core.h | 2 -
drivers/i2c/busses/i2c-designware-platdrv.c | 39 +-
drivers/mfd/intel-lpss.c | 6 +-
drivers/opp/Makefile | 1 +
drivers/opp/ti-opp-supply.c | 425 +++++++++++++++++++++
drivers/pci/pci-driver.c | 21 +-
drivers/pci/pcie/portdrv_pci.c | 3 +
drivers/platform/x86/surfacepro3_button.c | 4 +-
drivers/power/avs/rockchip-io-domain.c | 24 +-
drivers/powercap/intel_rapl.c | 99 ++++-
drivers/powercap/powercap_sys.c | 6 +-
drivers/scsi/scsi_transport_spi.c | 16 +-
drivers/thermal/cpu_cooling.c | 201 ++--------
include/linux/acpi.h | 1 +
include/linux/cpu_cooling.h | 75 +---
include/linux/pm.h | 16 +-
include/linux/pm_wakeup.h | 7 +
include/linux/suspend.h | 28 +-
include/trace/events/thermal.h | 10 +-
kernel/configs/nopm.config | 15 +
kernel/power/main.c | 29 ++
kernel/power/snapshot.c | 6 +-
kernel/power/swap.c | 4 +-
tools/power/cpupower/lib/cpufreq.h | 4 -
.../x86/intel_pstate_tracer/intel_pstate_tracer.py | 15 +
67 files changed, 2310 insertions(+), 1099 deletions(-)
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2018-01-21 2:19 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-01-21 2:19 [GIT PULL] Power management updates for v4.16-rc1 Rafael J. Wysocki
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).