linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Rafael J. Wysocki" <rafael@kernel.org>
To: Bjorn Helgaas <helgaas@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>,
	Linux PCI <linux-pci@vger.kernel.org>,
	Stefan Gottwald <gottwald@igel.com>,
	Mika Westerberg <mika.westerberg@linux.intel.com>,
	Linux PM <linux-pm@vger.kernel.org>,
	LKML <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] PCI: PM: Quirk bridge D3 on Elo i2
Date: Fri, 27 May 2022 20:55:28 +0200	[thread overview]
Message-ID: <CAJZ5v0gSxvg7USAvc2UrsrAdFs+UKBw8PGQapey3zuyrQRb4tA@mail.gmail.com> (raw)
In-Reply-To: <20220526221258.GA409855@bhelgaas>

On Fri, May 27, 2022 at 12:13 AM Bjorn Helgaas <helgaas@kernel.org> wrote:
>
> On Thu, Mar 31, 2022 at 07:38:51PM +0200, Rafael J. Wysocki wrote:
> > From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> >
> > If one of the PCIe root ports on Elo i2 is put into D3cold and then
> > back into D0, the downstream device becomes permanently inaccessible,
> > so add a bridge D3 DMI quirk for that system.
> >
> > This was exposed by commit 14858dcc3b35 ("PCI: Use
> > pci_update_current_state() in pci_enable_device_flags()"), but before
> > that commit the root port in question had never been put into D3cold
> > for real due to a mismatch between its power state retrieved from the
> > PCI_PM_CTRL register (which was accessible even though the platform
> > firmware indicated that the port was in D3cold) and the state of an
> > ACPI power resource involved in its power management.
> >
> > BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215715
> > Reported-by: Stefan Gottwald <gottwald@igel.com>
> > Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> > ---
> >  drivers/pci/pci.c |   10 ++++++++++
> >  1 file changed, 10 insertions(+)
> >
> > Index: linux-pm/drivers/pci/pci.c
> > ===================================================================
> > --- linux-pm.orig/drivers/pci/pci.c
> > +++ linux-pm/drivers/pci/pci.c
> > @@ -2920,6 +2920,16 @@ static const struct dmi_system_id bridge
> >                       DMI_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co., Ltd."),
> >                       DMI_MATCH(DMI_BOARD_NAME, "X299 DESIGNARE EX-CF"),
> >               },
> > +             /*
> > +              * Downstream device is not accessible after putting a root port
> > +              * into D3cold and back into D0 on Elo i2.
> > +              */
> > +             .ident = "Elo i2",
> > +             .matches = {
> > +                     DMI_MATCH(DMI_SYS_VENDOR, "Elo Touch Solutions"),
> > +                     DMI_MATCH(DMI_PRODUCT_NAME, "Elo i2"),
> > +                     DMI_MATCH(DMI_PRODUCT_VERSION, "RevB"),
> > +             },
> >       },
>
> This has already made it to Linus' and some stable trees, but I think
> we need the following touchup.  I plan to send it right after my v5.19
> pull request.

Ouch, sorry.

> commit a99f6bb133df ("PCI/PM: Fix bridge_d3_blacklist[] Elo i2 overwrite of Gigabyte X299")
> Author: Bjorn Helgaas <bhelgaas@google.com>
> Date:   Thu May 26 16:52:23 2022 -0500
>
>     PCI/PM: Fix bridge_d3_blacklist[] Elo i2 overwrite of Gigabyte X299
>
>     92597f97a40b ("PCI/PM: Avoid putting Elo i2 PCIe Ports in D3cold") omitted
>     braces around the new Elo i2 entry, so it overwrote the existing Gigabyte
>     X299 entry.
>
>     Found by:
>
>       $ make W=1 drivers/pci/pci.o
>         CC      drivers/pci/pci.o
>       drivers/pci/pci.c:2974:12: error: initialized field overwritten [-Werror=override-init]
>        2974 |   .ident = "Elo i2",
>             |            ^~~~~~~~
>
>     Fixes: 92597f97a40b ("PCI/PM: Avoid putting Elo i2 PCIe Ports in D3cold")
>     Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
>     Cc: stable@vger.kernel.org  # v5.15+
>
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index d25122fbe98a..5b400a742621 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -2920,6 +2920,8 @@ static const struct dmi_system_id bridge_d3_blacklist[] = {
>                         DMI_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co., Ltd."),
>                         DMI_MATCH(DMI_BOARD_NAME, "X299 DESIGNARE EX-CF"),
>                 },
> +       },
> +       {
>                 /*
>                  * Downstream device is not accessible after putting a root port
>                  * into D3cold and back into D0 on Elo i2.

      reply	other threads:[~2022-05-27 18:55 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-31 17:38 [PATCH] PCI: PM: Quirk bridge D3 on Elo i2 Rafael J. Wysocki
2022-03-31 21:57 ` Bjorn Helgaas
2022-04-01 11:34   ` Rafael J. Wysocki
2022-04-04 14:46     ` Rafael J. Wysocki
2022-04-08 19:53       ` Bjorn Helgaas
2022-04-09 13:35         ` Rafael J. Wysocki
2022-04-10  9:16           ` Thorsten Leemhuis
2022-04-11 11:35             ` Rafael J. Wysocki
2022-04-11 12:10               ` Thorsten Leemhuis
2022-04-11 16:22                 ` Bjorn Helgaas
2022-05-26 22:12 ` Bjorn Helgaas
2022-05-27 18:55   ` Rafael J. Wysocki [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAJZ5v0gSxvg7USAvc2UrsrAdFs+UKBw8PGQapey3zuyrQRb4tA@mail.gmail.com \
    --to=rafael@kernel.org \
    --cc=gottwald@igel.com \
    --cc=helgaas@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mika.westerberg@linux.intel.com \
    --cc=rjw@rjwysocki.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).