* [PATCH] cpufreq: Kconfig: fix documentation links
@ 2021-04-19 21:57 Alexander Monakov
2021-04-21 17:01 ` Rafael J. Wysocki
0 siblings, 1 reply; 2+ messages in thread
From: Alexander Monakov @ 2021-04-19 21:57 UTC (permalink / raw)
To: linux-kernel; +Cc: Alexander Monakov, Rafael Wysocki, Viresh Kumar, linux-pm
User documentation for cpufreq governors and drivers has been moved to
admin-guide; adjust references from Kconfig entries accordingly.
Remove references from undocumented cpufreq drivers, as well as the
'userspace' cpufreq governor, for which no additional details are
provided in the admin-guide text.
Fixes: 2a0e49279850 ("cpufreq: User/admin documentation update and consolidation")
Signed-off-by: Alexander Monakov <amonakov@ispras.ru>
Cc: Rafael Wysocki <rjw@rjwysocki.net>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: linux-pm@vger.kernel.org
---
drivers/cpufreq/Kconfig | 23 ++++++-----------------
1 file changed, 6 insertions(+), 17 deletions(-)
diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
index 85de313ddec2..c3038cdc6865 100644
--- a/drivers/cpufreq/Kconfig
+++ b/drivers/cpufreq/Kconfig
@@ -13,7 +13,8 @@ config CPU_FREQ
clock speed, you need to either enable a dynamic cpufreq governor
(see below) after boot, or use a userspace tool.
- For details, take a look at <file:Documentation/cpu-freq>.
+ For details, take a look at
+ <file:Documentation/admin-guide/pm/cpufreq.rst>.
If in doubt, say N.
@@ -140,8 +141,6 @@ config CPU_FREQ_GOV_USERSPACE
To compile this driver as a module, choose M here: the
module will be called cpufreq_userspace.
- For details, take a look at <file:Documentation/cpu-freq/>.
-
If in doubt, say Y.
config CPU_FREQ_GOV_ONDEMAND
@@ -158,7 +157,8 @@ config CPU_FREQ_GOV_ONDEMAND
To compile this driver as a module, choose M here: the
module will be called cpufreq_ondemand.
- For details, take a look at linux/Documentation/cpu-freq.
+ For details, take a look at
+ <file:Documentation/admin-guide/pm/cpufreq.rst>.
If in doubt, say N.
@@ -182,7 +182,8 @@ config CPU_FREQ_GOV_CONSERVATIVE
To compile this driver as a module, choose M here: the
module will be called cpufreq_conservative.
- For details, take a look at linux/Documentation/cpu-freq.
+ For details, take a look at
+ <file:Documentation/admin-guide/pm/cpufreq.rst>.
If in doubt, say N.
@@ -246,8 +247,6 @@ config IA64_ACPI_CPUFREQ
This driver adds a CPUFreq driver which utilizes the ACPI
Processor Performance States.
- For details, take a look at <file:Documentation/cpu-freq/>.
-
If in doubt, say N.
endif
@@ -271,8 +270,6 @@ config LOONGSON2_CPUFREQ
Loongson2F and it's successors support this feature.
- For details, take a look at <file:Documentation/cpu-freq/>.
-
If in doubt, say N.
config LOONGSON1_CPUFREQ
@@ -282,8 +279,6 @@ config LOONGSON1_CPUFREQ
This option adds a CPUFreq driver for loongson1 processors which
support software configurable cpu frequency.
- For details, take a look at <file:Documentation/cpu-freq/>.
-
If in doubt, say N.
endif
@@ -293,8 +288,6 @@ config SPARC_US3_CPUFREQ
help
This adds the CPUFreq driver for UltraSPARC-III processors.
- For details, take a look at <file:Documentation/cpu-freq>.
-
If in doubt, say N.
config SPARC_US2E_CPUFREQ
@@ -302,8 +295,6 @@ config SPARC_US2E_CPUFREQ
help
This adds the CPUFreq driver for UltraSPARC-IIe processors.
- For details, take a look at <file:Documentation/cpu-freq>.
-
If in doubt, say N.
endif
@@ -318,8 +309,6 @@ config SH_CPU_FREQ
will also generate a notice in the boot log before disabling
itself if the CPU in question is not capable of rate rounding.
- For details, take a look at <file:Documentation/cpu-freq>.
-
If unsure, say N.
endif
--
2.30.0
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] cpufreq: Kconfig: fix documentation links
2021-04-19 21:57 [PATCH] cpufreq: Kconfig: fix documentation links Alexander Monakov
@ 2021-04-21 17:01 ` Rafael J. Wysocki
0 siblings, 0 replies; 2+ messages in thread
From: Rafael J. Wysocki @ 2021-04-21 17:01 UTC (permalink / raw)
To: Alexander Monakov
Cc: Linux Kernel Mailing List, Rafael Wysocki, Viresh Kumar, Linux PM
On Tue, Apr 20, 2021 at 12:03 AM Alexander Monakov <amonakov@ispras.ru> wrote:
>
> User documentation for cpufreq governors and drivers has been moved to
> admin-guide; adjust references from Kconfig entries accordingly.
>
> Remove references from undocumented cpufreq drivers, as well as the
> 'userspace' cpufreq governor, for which no additional details are
> provided in the admin-guide text.
>
> Fixes: 2a0e49279850 ("cpufreq: User/admin documentation update and consolidation")
> Signed-off-by: Alexander Monakov <amonakov@ispras.ru>
> Cc: Rafael Wysocki <rjw@rjwysocki.net>
> Cc: Viresh Kumar <viresh.kumar@linaro.org>
> Cc: linux-pm@vger.kernel.org
> ---
> drivers/cpufreq/Kconfig | 23 ++++++-----------------
> 1 file changed, 6 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
> index 85de313ddec2..c3038cdc6865 100644
> --- a/drivers/cpufreq/Kconfig
> +++ b/drivers/cpufreq/Kconfig
> @@ -13,7 +13,8 @@ config CPU_FREQ
> clock speed, you need to either enable a dynamic cpufreq governor
> (see below) after boot, or use a userspace tool.
>
> - For details, take a look at <file:Documentation/cpu-freq>.
> + For details, take a look at
> + <file:Documentation/admin-guide/pm/cpufreq.rst>.
>
> If in doubt, say N.
>
> @@ -140,8 +141,6 @@ config CPU_FREQ_GOV_USERSPACE
> To compile this driver as a module, choose M here: the
> module will be called cpufreq_userspace.
>
> - For details, take a look at <file:Documentation/cpu-freq/>.
> -
> If in doubt, say Y.
>
> config CPU_FREQ_GOV_ONDEMAND
> @@ -158,7 +157,8 @@ config CPU_FREQ_GOV_ONDEMAND
> To compile this driver as a module, choose M here: the
> module will be called cpufreq_ondemand.
>
> - For details, take a look at linux/Documentation/cpu-freq.
> + For details, take a look at
> + <file:Documentation/admin-guide/pm/cpufreq.rst>.
>
> If in doubt, say N.
>
> @@ -182,7 +182,8 @@ config CPU_FREQ_GOV_CONSERVATIVE
> To compile this driver as a module, choose M here: the
> module will be called cpufreq_conservative.
>
> - For details, take a look at linux/Documentation/cpu-freq.
> + For details, take a look at
> + <file:Documentation/admin-guide/pm/cpufreq.rst>.
>
> If in doubt, say N.
>
> @@ -246,8 +247,6 @@ config IA64_ACPI_CPUFREQ
> This driver adds a CPUFreq driver which utilizes the ACPI
> Processor Performance States.
>
> - For details, take a look at <file:Documentation/cpu-freq/>.
> -
> If in doubt, say N.
> endif
>
> @@ -271,8 +270,6 @@ config LOONGSON2_CPUFREQ
>
> Loongson2F and it's successors support this feature.
>
> - For details, take a look at <file:Documentation/cpu-freq/>.
> -
> If in doubt, say N.
>
> config LOONGSON1_CPUFREQ
> @@ -282,8 +279,6 @@ config LOONGSON1_CPUFREQ
> This option adds a CPUFreq driver for loongson1 processors which
> support software configurable cpu frequency.
>
> - For details, take a look at <file:Documentation/cpu-freq/>.
> -
> If in doubt, say N.
> endif
>
> @@ -293,8 +288,6 @@ config SPARC_US3_CPUFREQ
> help
> This adds the CPUFreq driver for UltraSPARC-III processors.
>
> - For details, take a look at <file:Documentation/cpu-freq>.
> -
> If in doubt, say N.
>
> config SPARC_US2E_CPUFREQ
> @@ -302,8 +295,6 @@ config SPARC_US2E_CPUFREQ
> help
> This adds the CPUFreq driver for UltraSPARC-IIe processors.
>
> - For details, take a look at <file:Documentation/cpu-freq>.
> -
> If in doubt, say N.
> endif
>
> @@ -318,8 +309,6 @@ config SH_CPU_FREQ
> will also generate a notice in the boot log before disabling
> itself if the CPU in question is not capable of rate rounding.
>
> - For details, take a look at <file:Documentation/cpu-freq>.
> -
> If unsure, say N.
> endif
>
> --
Applied as 5.13 material, thanks!
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-04-21 17:02 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-19 21:57 [PATCH] cpufreq: Kconfig: fix documentation links Alexander Monakov
2021-04-21 17:01 ` Rafael J. Wysocki
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).