* [GIT PULL] thermal changes for v6.3-rc1
@ 2023-01-26 16:19 Daniel Lezcano
2023-01-26 16:26 ` Rafael J. Wysocki
0 siblings, 1 reply; 2+ messages in thread
From: Daniel Lezcano @ 2023-01-26 16:19 UTC (permalink / raw)
To: Rafael J. Wysocki
Cc: Daniel Lezcano, Andy Shevchenko, Daniel Golle, Dmitry Baryshkov,
Krzysztof Kozlowski, Randy Dunlap, Viorel Suman (OSS),
Yangtao Li, ye.xingchen, Linux Kernel Mailing List,
Linux PM mailing list
Hi Rafael,
please consider pulling:
The following changes since commit 3a151494dc04c76add577ae66e8a04f900638aaf:
thermal/drivers/armada: Use strscpy() to instead of strncpy()
(2023-01-06 14:14:48 +0100)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git
tags/thermal-v6.3-rc1
for you to fetch changes up to 8c5ee9155f8ae133070b40ee4be03cafb35c188d:
thermal/drivers/armada: Use the thermal_zone_get_crit_temp()
(2023-01-24 12:37:56 +0100)
----------------------------------------------------------------
- Fix kerneldoc format errors for Rockchip, Mediatek and Uniphier
(Randy Dunlap)
- Add the missing 'qcom,adc-tm7' compatible string in the dt-bindings
(Krzysztof Kozlowski)
- Improve the calibration routine by relying on the nvmem to read the
values and provide a set of fixes for the QCom tsens driver (Dmitry
Baryshkov)
- Remove the duplicate interrupt setting routine in the QCom tsens
driver (Daniel Lezcano)
- Fix a wrong loop condition in the i.MX SC thermal driver and add the
iMX8QM sensors (Viorel Suman)
- Fix header inclusion asm-generic.h by asm.h for the
qcom-spmi-adc-tm5 driver (Andy Shevchenko)
- Use the devm_platform_get_and_ioremap_resource() combo function in
all the drivers where the conversion applies (Ye Xingchen)
- Replace a literal mask by an existing corresponding macro (Yangtao
Li)
- Add support for MT7986 and MT7981 (Daniel Golle)
- Use thermal_zone_get_crit_temp() for the Armada thermal driver
(Daniel Lezcano)
----------------------------------------------------------------
Andy Shevchenko (1):
thermal/drivers/qcom-spmi-adc-tm5: Use asm intead of asm-generic
Daniel Golle (2):
thermal/drivers/mtk: Use function pointer for raw_to_mcelsius
thermal/drivers/mtk: Add support for MT7986 and MT7981
Daniel Lezcano (2):
thermal/drivers/qcom: Remove duplicate set next trip point
interrupt code
thermal/drivers/armada: Use the thermal_zone_get_crit_temp()
Dmitry Baryshkov (14):
dt-bindings: thermal: tsens: add msm8956 compat
dt-bindings: thermal: tsens: support per-sensor calibration cells
dt-bindings: thermal: tsens: add per-sensor cells for msm8974
thermal/drivers/tsens: Drop unnecessary hw_ids
thermal/drivers/tsens: Drop msm8976-specific defines
thermal/drivers/tsens: Sort out msm8976 vs msm8956 data
thermal/drivers/tsens: fix slope values for msm8939
thermal/drivers/tsens: limit num_sensors to 9 for msm8939
thermal/drivers/tsens: Support using nvmem cells for calibration data
thermal/drivers/tsens: Support using nvmem cells for msm8974
calibration
thermal/drivers/tsens: Rework legacy calibration data parsers
thermal/drivers/tsens: Drop single-cell code for mdm9607
thermal/drivers/tsens: Drop single-cell code for msm8939
thermal/drivers/tsens: Drop single-cell code for msm8976/msm8956
Krzysztof Kozlowski (1):
dt-bindings: thermal: qcom-spmi-adc-tm5: add qcom,adc-tm7
Rafael J. Wysocki (1):
Merge tag 'generic-trip-point' of
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Randy Dunlap (3):
thermal/drivers/mtk_thermal: Fix kernel-doc function name
thermal/drivers/rockchip: Fix kernel-doc warnings
thermal/drivers/uniphier: Use regular comment syntax
Viorel Suman (2):
thermal/drivers/imx_sc_thermal: Fix the loop condition
thermal/drivers/imx_sc_thermal: Add iMX8QM sensors
Yangtao Li (1):
thermal/drivers/sun8i: Convert to use macro
ye xingchen (9):
thermal/drivers/brcmstb_thermal: Use
devm_platform_get_and_ioremap_resource()
thermal/drivers/bcm2835: Use devm_platform_get_and_ioremap_resource()
thermal/drivers/dove: Use devm_platform_get_and_ioremap_resource()
thermal/drivers/armada: Use devm_platform_get_and_ioremap_resource()
thermal/drivers/mtk_thermal: Use
devm_platform_get_and_ioremap_resource()
thermal/drivers/rockchip: Use
devm_platform_get_and_ioremap_resource()
thermal/drivers/thermal_mmio: Use
devm_platform_get_and_ioremap_resource()
thermal/drivers/kirkwood: Use
devm_platform_get_and_ioremap_resource()
thermal/drivers/spear: Use devm_platform_get_and_ioremap_resource()
.../bindings/thermal/qcom-spmi-adc-tm5.yaml | 1 +
.../devicetree/bindings/thermal/qcom-tsens.yaml | 153 ++++-
drivers/thermal/armada_thermal.c | 42 +-
drivers/thermal/broadcom/bcm2835_thermal.c | 4 +-
drivers/thermal/broadcom/brcmstb_thermal.c | 4 +-
drivers/thermal/dove_thermal.c | 7 +-
drivers/thermal/imx_sc_thermal.c | 8 +-
drivers/thermal/kirkwood_thermal.c | 4 +-
drivers/thermal/mtk_thermal.c | 149 ++++-
drivers/thermal/qcom/qcom-spmi-adc-tm5.c | 3 +-
drivers/thermal/qcom/tsens-v0_1.c | 655
++++++---------------
drivers/thermal/qcom/tsens-v1.c | 340 +++--------
drivers/thermal/qcom/tsens.c | 219 +++++--
drivers/thermal/qcom/tsens.h | 46 +-
drivers/thermal/rockchip_thermal.c | 10 +-
drivers/thermal/spear_thermal.c | 4 +-
drivers/thermal/sun8i_thermal.c | 4 +-
drivers/thermal/thermal_mmio.c | 4 +-
drivers/thermal/uniphier_thermal.c | 2 +-
19 files changed, 800 insertions(+), 859 deletions(-)
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [GIT PULL] thermal changes for v6.3-rc1
2023-01-26 16:19 [GIT PULL] thermal changes for v6.3-rc1 Daniel Lezcano
@ 2023-01-26 16:26 ` Rafael J. Wysocki
0 siblings, 0 replies; 2+ messages in thread
From: Rafael J. Wysocki @ 2023-01-26 16:26 UTC (permalink / raw)
To: Daniel Lezcano
Cc: Rafael J. Wysocki, Andy Shevchenko, Daniel Golle,
Dmitry Baryshkov, Krzysztof Kozlowski, Randy Dunlap,
Viorel Suman (OSS),
Yangtao Li, ye.xingchen, Linux Kernel Mailing List,
Linux PM mailing list
On Thu, Jan 26, 2023 at 5:19 PM Daniel Lezcano
<daniel.lezcano@linaro.org> wrote:
>
> Hi Rafael,
>
> please consider pulling:
>
> The following changes since commit 3a151494dc04c76add577ae66e8a04f900638aaf:
>
> thermal/drivers/armada: Use strscpy() to instead of strncpy()
> (2023-01-06 14:14:48 +0100)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git
> tags/thermal-v6.3-rc1
>
> for you to fetch changes up to 8c5ee9155f8ae133070b40ee4be03cafb35c188d:
>
> thermal/drivers/armada: Use the thermal_zone_get_crit_temp()
> (2023-01-24 12:37:56 +0100)
>
> ----------------------------------------------------------------
> - Fix kerneldoc format errors for Rockchip, Mediatek and Uniphier
> (Randy Dunlap)
>
> - Add the missing 'qcom,adc-tm7' compatible string in the dt-bindings
> (Krzysztof Kozlowski)
>
> - Improve the calibration routine by relying on the nvmem to read the
> values and provide a set of fixes for the QCom tsens driver (Dmitry
> Baryshkov)
>
> - Remove the duplicate interrupt setting routine in the QCom tsens
> driver (Daniel Lezcano)
>
> - Fix a wrong loop condition in the i.MX SC thermal driver and add the
> iMX8QM sensors (Viorel Suman)
>
> - Fix header inclusion asm-generic.h by asm.h for the
> qcom-spmi-adc-tm5 driver (Andy Shevchenko)
>
> - Use the devm_platform_get_and_ioremap_resource() combo function in
> all the drivers where the conversion applies (Ye Xingchen)
>
> - Replace a literal mask by an existing corresponding macro (Yangtao
> Li)
>
> - Add support for MT7986 and MT7981 (Daniel Golle)
>
> - Use thermal_zone_get_crit_temp() for the Armada thermal driver
> (Daniel Lezcano)
>
> ----------------------------------------------------------------
> Andy Shevchenko (1):
> thermal/drivers/qcom-spmi-adc-tm5: Use asm intead of asm-generic
>
> Daniel Golle (2):
> thermal/drivers/mtk: Use function pointer for raw_to_mcelsius
> thermal/drivers/mtk: Add support for MT7986 and MT7981
>
> Daniel Lezcano (2):
> thermal/drivers/qcom: Remove duplicate set next trip point
> interrupt code
> thermal/drivers/armada: Use the thermal_zone_get_crit_temp()
>
> Dmitry Baryshkov (14):
> dt-bindings: thermal: tsens: add msm8956 compat
> dt-bindings: thermal: tsens: support per-sensor calibration cells
> dt-bindings: thermal: tsens: add per-sensor cells for msm8974
> thermal/drivers/tsens: Drop unnecessary hw_ids
> thermal/drivers/tsens: Drop msm8976-specific defines
> thermal/drivers/tsens: Sort out msm8976 vs msm8956 data
> thermal/drivers/tsens: fix slope values for msm8939
> thermal/drivers/tsens: limit num_sensors to 9 for msm8939
> thermal/drivers/tsens: Support using nvmem cells for calibration data
> thermal/drivers/tsens: Support using nvmem cells for msm8974
> calibration
> thermal/drivers/tsens: Rework legacy calibration data parsers
> thermal/drivers/tsens: Drop single-cell code for mdm9607
> thermal/drivers/tsens: Drop single-cell code for msm8939
> thermal/drivers/tsens: Drop single-cell code for msm8976/msm8956
>
> Krzysztof Kozlowski (1):
> dt-bindings: thermal: qcom-spmi-adc-tm5: add qcom,adc-tm7
>
> Rafael J. Wysocki (1):
> Merge tag 'generic-trip-point' of
> ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
>
> Randy Dunlap (3):
> thermal/drivers/mtk_thermal: Fix kernel-doc function name
> thermal/drivers/rockchip: Fix kernel-doc warnings
> thermal/drivers/uniphier: Use regular comment syntax
>
> Viorel Suman (2):
> thermal/drivers/imx_sc_thermal: Fix the loop condition
> thermal/drivers/imx_sc_thermal: Add iMX8QM sensors
>
> Yangtao Li (1):
> thermal/drivers/sun8i: Convert to use macro
>
> ye xingchen (9):
> thermal/drivers/brcmstb_thermal: Use
> devm_platform_get_and_ioremap_resource()
> thermal/drivers/bcm2835: Use devm_platform_get_and_ioremap_resource()
> thermal/drivers/dove: Use devm_platform_get_and_ioremap_resource()
> thermal/drivers/armada: Use devm_platform_get_and_ioremap_resource()
> thermal/drivers/mtk_thermal: Use
> devm_platform_get_and_ioremap_resource()
> thermal/drivers/rockchip: Use
> devm_platform_get_and_ioremap_resource()
> thermal/drivers/thermal_mmio: Use
> devm_platform_get_and_ioremap_resource()
> thermal/drivers/kirkwood: Use
> devm_platform_get_and_ioremap_resource()
> thermal/drivers/spear: Use devm_platform_get_and_ioremap_resource()
>
> .../bindings/thermal/qcom-spmi-adc-tm5.yaml | 1 +
> .../devicetree/bindings/thermal/qcom-tsens.yaml | 153 ++++-
> drivers/thermal/armada_thermal.c | 42 +-
> drivers/thermal/broadcom/bcm2835_thermal.c | 4 +-
> drivers/thermal/broadcom/brcmstb_thermal.c | 4 +-
> drivers/thermal/dove_thermal.c | 7 +-
> drivers/thermal/imx_sc_thermal.c | 8 +-
> drivers/thermal/kirkwood_thermal.c | 4 +-
> drivers/thermal/mtk_thermal.c | 149 ++++-
> drivers/thermal/qcom/qcom-spmi-adc-tm5.c | 3 +-
> drivers/thermal/qcom/tsens-v0_1.c | 655
> ++++++---------------
> drivers/thermal/qcom/tsens-v1.c | 340 +++--------
> drivers/thermal/qcom/tsens.c | 219 +++++--
> drivers/thermal/qcom/tsens.h | 46 +-
> drivers/thermal/rockchip_thermal.c | 10 +-
> drivers/thermal/spear_thermal.c | 4 +-
> drivers/thermal/sun8i_thermal.c | 4 +-
> drivers/thermal/thermal_mmio.c | 4 +-
> drivers/thermal/uniphier_thermal.c | 2 +-
> 19 files changed, 800 insertions(+), 859 deletions(-)
>
> --
Pulled pushed into the linux-next branch in linux-pm.git.
If all goes well, I'll merge it into thermal on Monday.
Thanks!
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2023-01-26 16:28 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-01-26 16:19 [GIT PULL] thermal changes for v6.3-rc1 Daniel Lezcano
2023-01-26 16:26 ` Rafael J. Wysocki
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).