* [PATCH v3 1/9] powerpc: build .dtb files in dts directory
2018-09-10 15:03 [PATCH v3 0/9] Devicetree build consolidation Rob Herring
@ 2018-09-10 15:03 ` Rob Herring
2018-09-27 13:39 ` Rob Herring
2018-09-10 15:03 ` [PATCH v3 2/9] nios2: " Rob Herring
` (7 subsequent siblings)
8 siblings, 1 reply; 22+ messages in thread
From: Rob Herring @ 2018-09-10 15:03 UTC (permalink / raw)
To: devicetree, linux-kernel, Masahiro Yamada
Cc: Frank Rowand, Benjamin Herrenschmidt, Paul Mackerras,
Michael Ellerman, linuxppc-dev
Align powerpc with other architectures which build the dtb files in the
same directory as the dts files. This is also in line with most other
build targets which are located in the same directory as the source.
This move will help enable the 'dtbs' target which builds all the dtbs
regardless of kernel config.
This transition could break some scripts if they expect dtb files in the
old location.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
v3:
- Remove duplicate mpc5200 dtbs from image-y targets. The dtb target already
comes from the cuImage.<platform> target.
arch/powerpc/Makefile | 2 +-
arch/powerpc/boot/Makefile | 55 ++++++++++++++++------------------
arch/powerpc/boot/dts/Makefile | 1 +
3 files changed, 28 insertions(+), 30 deletions(-)
create mode 100644 arch/powerpc/boot/dts/Makefile
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 11a1acba164a..53ea887eb34e 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -294,7 +294,7 @@ bootwrapper_install:
$(Q)$(MAKE) $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
%.dtb: scripts
- $(Q)$(MAKE) $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
+ $(Q)$(MAKE) $(build)=$(boot)/dts $(patsubst %,$(boot)/dts/%,$@)
# Used to create 'merged defconfigs'
# To use it $(call) it with the first argument as the base defconfig
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 0fb96c26136f..bca5c23767df 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -304,9 +304,9 @@ image-$(CONFIG_PPC_ADDER875) += cuImage.adder875-uboot \
dtbImage.adder875-redboot
# Board ports in arch/powerpc/platform/52xx/Kconfig
-image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200 lite5200.dtb
-image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200b lite5200b.dtb
-image-$(CONFIG_PPC_MEDIA5200) += cuImage.media5200 media5200.dtb
+image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200
+image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200b
+image-$(CONFIG_PPC_MEDIA5200) += cuImage.media5200
# Board ports in arch/powerpc/platform/82xx/Kconfig
image-$(CONFIG_MPC8272_ADS) += cuImage.mpc8272ads
@@ -381,11 +381,11 @@ $(addprefix $(obj)/, $(sort $(filter zImage.%, $(image-y)))): vmlinux $(wrapperb
$(call if_changed,wrap,$(subst $(obj)/zImage.,,$@))
# dtbImage% - a dtbImage is a zImage with an embedded device tree blob
-$(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(obj)/%.dtb FORCE
- $(call if_changed,wrap,$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
+$(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(obj)/dts/%.dtb FORCE
+ $(call if_changed,wrap,$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
-$(obj)/dtbImage.%: vmlinux $(wrapperbits) $(obj)/%.dtb FORCE
- $(call if_changed,wrap,$*,,$(obj)/$*.dtb)
+$(obj)/dtbImage.%: vmlinux $(wrapperbits) $(obj)/dts/%.dtb FORCE
+ $(call if_changed,wrap,$*,,$(obj)/dts/$*.dtb)
# This cannot be in the root of $(src) as the zImage rule always adds a $(obj)
# prefix
@@ -395,36 +395,33 @@ $(obj)/vmlinux.strip: vmlinux
$(obj)/uImage: vmlinux $(wrapperbits) FORCE
$(call if_changed,wrap,uboot)
-$(obj)/uImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
- $(call if_changed,wrap,uboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
+$(obj)/uImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
+ $(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
-$(obj)/uImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
- $(call if_changed,wrap,uboot-$*,,$(obj)/$*.dtb)
+$(obj)/uImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
+ $(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb)
-$(obj)/cuImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
- $(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
+$(obj)/cuImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
+ $(call if_changed,wrap,cuboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
-$(obj)/cuImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
- $(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb)
+$(obj)/cuImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
+ $(call if_changed,wrap,cuboot-$*,,$(obj)/dts/$*.dtb)
-$(obj)/simpleImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
- $(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
+$(obj)/simpleImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
+ $(call if_changed,wrap,simpleboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
-$(obj)/simpleImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
- $(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb)
+$(obj)/simpleImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
+ $(call if_changed,wrap,simpleboot-$*,,$(obj)/dts/$*.dtb)
-$(obj)/treeImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
- $(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
+$(obj)/treeImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
+ $(call if_changed,wrap,treeboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
-$(obj)/treeImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
- $(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb)
+$(obj)/treeImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
+ $(call if_changed,wrap,treeboot-$*,,$(obj)/dts/$*.dtb)
-# Rule to build device tree blobs
-$(obj)/%.dtb: $(src)/dts/%.dts FORCE
- $(call if_changed_dep,dtc)
-
-$(obj)/%.dtb: $(src)/dts/fsl/%.dts FORCE
- $(call if_changed_dep,dtc)
+# Needed for the above targets to work with dts/fsl/ files
+$(obj)/dts/%.dtb: $(obj)/dts/fsl/%.dtb
+ @cp $< $@
# If there isn't a platform selected then just strip the vmlinux.
ifeq (,$(image-y))
diff --git a/arch/powerpc/boot/dts/Makefile b/arch/powerpc/boot/dts/Makefile
new file mode 100644
index 000000000000..f66554cd5c45
--- /dev/null
+++ b/arch/powerpc/boot/dts/Makefile
@@ -0,0 +1 @@
+# SPDX-License-Identifier: GPL-2.0
--
2.17.1
^ permalink raw reply related [flat|nested] 22+ messages in thread* Re: [PATCH v3 1/9] powerpc: build .dtb files in dts directory
2018-09-10 15:03 ` [PATCH v3 1/9] powerpc: build .dtb files in dts directory Rob Herring
@ 2018-09-27 13:39 ` Rob Herring
0 siblings, 0 replies; 22+ messages in thread
From: Rob Herring @ 2018-09-27 13:39 UTC (permalink / raw)
To: devicetree, linux-kernel, Masahiro Yamada
Cc: Frank Rowand, Benjamin Herrenschmidt, Paul Mackerras,
Michael Ellerman, linuxppc-dev
On Mon, Sep 10, 2018 at 10:04 AM Rob Herring <robh@kernel.org> wrote:
>
> Align powerpc with other architectures which build the dtb files in the
> same directory as the dts files. This is also in line with most other
> build targets which are located in the same directory as the source.
> This move will help enable the 'dtbs' target which builds all the dtbs
> regardless of kernel config.
>
> This transition could break some scripts if they expect dtb files in the
> old location.
>
> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> Cc: Paul Mackerras <paulus@samba.org>
> Cc: Michael Ellerman <mpe@ellerman.id.au>
> Cc: linuxppc-dev@lists.ozlabs.org
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
> v3:
> - Remove duplicate mpc5200 dtbs from image-y targets. The dtb target already
> comes from the cuImage.<platform> target.
Do the PPC folks have any comments on this?
Rob
>
> arch/powerpc/Makefile | 2 +-
> arch/powerpc/boot/Makefile | 55 ++++++++++++++++------------------
> arch/powerpc/boot/dts/Makefile | 1 +
> 3 files changed, 28 insertions(+), 30 deletions(-)
> create mode 100644 arch/powerpc/boot/dts/Makefile
>
> diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
> index 11a1acba164a..53ea887eb34e 100644
> --- a/arch/powerpc/Makefile
> +++ b/arch/powerpc/Makefile
> @@ -294,7 +294,7 @@ bootwrapper_install:
> $(Q)$(MAKE) $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
>
> %.dtb: scripts
> - $(Q)$(MAKE) $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
> + $(Q)$(MAKE) $(build)=$(boot)/dts $(patsubst %,$(boot)/dts/%,$@)
>
> # Used to create 'merged defconfigs'
> # To use it $(call) it with the first argument as the base defconfig
> diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
> index 0fb96c26136f..bca5c23767df 100644
> --- a/arch/powerpc/boot/Makefile
> +++ b/arch/powerpc/boot/Makefile
> @@ -304,9 +304,9 @@ image-$(CONFIG_PPC_ADDER875) += cuImage.adder875-uboot \
> dtbImage.adder875-redboot
>
> # Board ports in arch/powerpc/platform/52xx/Kconfig
> -image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200 lite5200.dtb
> -image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200b lite5200b.dtb
> -image-$(CONFIG_PPC_MEDIA5200) += cuImage.media5200 media5200.dtb
> +image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200
> +image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200b
> +image-$(CONFIG_PPC_MEDIA5200) += cuImage.media5200
>
> # Board ports in arch/powerpc/platform/82xx/Kconfig
> image-$(CONFIG_MPC8272_ADS) += cuImage.mpc8272ads
> @@ -381,11 +381,11 @@ $(addprefix $(obj)/, $(sort $(filter zImage.%, $(image-y)))): vmlinux $(wrapperb
> $(call if_changed,wrap,$(subst $(obj)/zImage.,,$@))
>
> # dtbImage% - a dtbImage is a zImage with an embedded device tree blob
> -$(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(obj)/%.dtb FORCE
> - $(call if_changed,wrap,$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
> +$(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(obj)/dts/%.dtb FORCE
> + $(call if_changed,wrap,$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
>
> -$(obj)/dtbImage.%: vmlinux $(wrapperbits) $(obj)/%.dtb FORCE
> - $(call if_changed,wrap,$*,,$(obj)/$*.dtb)
> +$(obj)/dtbImage.%: vmlinux $(wrapperbits) $(obj)/dts/%.dtb FORCE
> + $(call if_changed,wrap,$*,,$(obj)/dts/$*.dtb)
>
> # This cannot be in the root of $(src) as the zImage rule always adds a $(obj)
> # prefix
> @@ -395,36 +395,33 @@ $(obj)/vmlinux.strip: vmlinux
> $(obj)/uImage: vmlinux $(wrapperbits) FORCE
> $(call if_changed,wrap,uboot)
>
> -$(obj)/uImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
> - $(call if_changed,wrap,uboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
> +$(obj)/uImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
> + $(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
>
> -$(obj)/uImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
> - $(call if_changed,wrap,uboot-$*,,$(obj)/$*.dtb)
> +$(obj)/uImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
> + $(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb)
>
> -$(obj)/cuImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
> - $(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
> +$(obj)/cuImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
> + $(call if_changed,wrap,cuboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
>
> -$(obj)/cuImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
> - $(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb)
> +$(obj)/cuImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
> + $(call if_changed,wrap,cuboot-$*,,$(obj)/dts/$*.dtb)
>
> -$(obj)/simpleImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
> - $(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
> +$(obj)/simpleImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
> + $(call if_changed,wrap,simpleboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
>
> -$(obj)/simpleImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
> - $(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb)
> +$(obj)/simpleImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
> + $(call if_changed,wrap,simpleboot-$*,,$(obj)/dts/$*.dtb)
>
> -$(obj)/treeImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
> - $(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
> +$(obj)/treeImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
> + $(call if_changed,wrap,treeboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
>
> -$(obj)/treeImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
> - $(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb)
> +$(obj)/treeImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
> + $(call if_changed,wrap,treeboot-$*,,$(obj)/dts/$*.dtb)
>
> -# Rule to build device tree blobs
> -$(obj)/%.dtb: $(src)/dts/%.dts FORCE
> - $(call if_changed_dep,dtc)
> -
> -$(obj)/%.dtb: $(src)/dts/fsl/%.dts FORCE
> - $(call if_changed_dep,dtc)
> +# Needed for the above targets to work with dts/fsl/ files
> +$(obj)/dts/%.dtb: $(obj)/dts/fsl/%.dtb
> + @cp $< $@
>
> # If there isn't a platform selected then just strip the vmlinux.
> ifeq (,$(image-y))
> diff --git a/arch/powerpc/boot/dts/Makefile b/arch/powerpc/boot/dts/Makefile
> new file mode 100644
> index 000000000000..f66554cd5c45
> --- /dev/null
> +++ b/arch/powerpc/boot/dts/Makefile
> @@ -0,0 +1 @@
> +# SPDX-License-Identifier: GPL-2.0
> --
> 2.17.1
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH v3 2/9] nios2: build .dtb files in dts directory
2018-09-10 15:03 [PATCH v3 0/9] Devicetree build consolidation Rob Herring
2018-09-10 15:03 ` [PATCH v3 1/9] powerpc: build .dtb files in dts directory Rob Herring
@ 2018-09-10 15:03 ` Rob Herring
2018-09-10 15:03 ` [PATCH v3 3/9] nios2: use common rules to build built-in dtb Rob Herring
` (6 subsequent siblings)
8 siblings, 0 replies; 22+ messages in thread
From: Rob Herring @ 2018-09-10 15:03 UTC (permalink / raw)
To: devicetree, linux-kernel, Masahiro Yamada
Cc: Frank Rowand, Ley Foon Tan, nios2-dev
Align nios2 with other architectures which build the dtb files in the
same directory as the dts files. This is also in line with most other
build targets which are located in the same directory as the source.
This move will help enable the 'dtbs' target which builds all the dtbs
regardless of kernel config.
This transition could break some scripts if they expect dtb files in
the old location.
Cc: Ley Foon Tan <lftan@altera.com>
Cc: nios2-dev@lists.rocketboards.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
arch/nios2/Makefile | 4 ++--
arch/nios2/boot/Makefile | 4 ----
arch/nios2/boot/dts/Makefile | 1 +
3 files changed, 3 insertions(+), 6 deletions(-)
create mode 100644 arch/nios2/boot/dts/Makefile
diff --git a/arch/nios2/Makefile b/arch/nios2/Makefile
index 8673a79dca9c..50eece1c6adb 100644
--- a/arch/nios2/Makefile
+++ b/arch/nios2/Makefile
@@ -59,10 +59,10 @@ archclean:
$(Q)$(MAKE) $(clean)=$(nios2-boot)
%.dtb: | scripts
- $(Q)$(MAKE) $(build)=$(nios2-boot) $(nios2-boot)/$@
+ $(Q)$(MAKE) $(build)=$(nios2-boot)/dts $(nios2-boot)/dts/$@
dtbs:
- $(Q)$(MAKE) $(build)=$(nios2-boot) $(nios2-boot)/$@
+ $(Q)$(MAKE) $(build)=$(nios2-boot)/dts
$(BOOT_TARGETS): vmlinux
$(Q)$(MAKE) $(build)=$(nios2-boot) $(nios2-boot)/$@
diff --git a/arch/nios2/boot/Makefile b/arch/nios2/boot/Makefile
index 2ba23a679732..007586094dde 100644
--- a/arch/nios2/boot/Makefile
+++ b/arch/nios2/boot/Makefile
@@ -47,10 +47,6 @@ obj-$(CONFIG_NIOS2_DTB_SOURCE_BOOL) += linked_dtb.o
targets += $(dtb-y)
-# Rule to build device tree blobs with make command
-$(obj)/%.dtb: $(src)/dts/%.dts FORCE
- $(call if_changed_dep,dtc)
-
$(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y))
install:
diff --git a/arch/nios2/boot/dts/Makefile b/arch/nios2/boot/dts/Makefile
new file mode 100644
index 000000000000..f66554cd5c45
--- /dev/null
+++ b/arch/nios2/boot/dts/Makefile
@@ -0,0 +1 @@
+# SPDX-License-Identifier: GPL-2.0
--
2.17.1
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH v3 3/9] nios2: use common rules to build built-in dtb
2018-09-10 15:03 [PATCH v3 0/9] Devicetree build consolidation Rob Herring
2018-09-10 15:03 ` [PATCH v3 1/9] powerpc: build .dtb files in dts directory Rob Herring
2018-09-10 15:03 ` [PATCH v3 2/9] nios2: " Rob Herring
@ 2018-09-10 15:03 ` Rob Herring
2018-09-10 15:03 ` [PATCH v3 4/9] nios2: fix building all dtbs Rob Herring
` (5 subsequent siblings)
8 siblings, 0 replies; 22+ messages in thread
From: Rob Herring @ 2018-09-10 15:03 UTC (permalink / raw)
To: devicetree, linux-kernel, Masahiro Yamada
Cc: Frank Rowand, Ley Foon Tan, nios2-dev
Using the common build support for built-in dtb files just requires
adding a .dtb.o target to obj-y.
This has the side effect that CONFIG_NIOS2_DTB_SOURCE should now be just
the dts filename in arch/nios2/boot/dts/ directory. Before any path was
supported, but if you want to build in your dtb to the kernel, it should
be in the kernel tree.
Cc: Ley Foon Tan <lftan@altera.com>
Cc: nios2-dev@lists.rocketboards.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
arch/nios2/Makefile | 6 ++----
arch/nios2/boot/Makefile | 14 --------------
arch/nios2/boot/dts/Makefile | 2 ++
arch/nios2/boot/linked_dtb.S | 19 -------------------
4 files changed, 4 insertions(+), 37 deletions(-)
delete mode 100644 arch/nios2/boot/linked_dtb.S
diff --git a/arch/nios2/Makefile b/arch/nios2/Makefile
index 50eece1c6adb..db2e78fe65c7 100644
--- a/arch/nios2/Makefile
+++ b/arch/nios2/Makefile
@@ -49,16 +49,14 @@ BOOT_TARGETS = vmImage zImage
PHONY += $(BOOT_TARGETS) install
KBUILD_IMAGE := $(nios2-boot)/vmImage
-ifneq ($(CONFIG_NIOS2_DTB_SOURCE),"")
- core-y += $(nios2-boot)/
-endif
+core-y += $(nios2-boot)/dts/
all: vmImage
archclean:
$(Q)$(MAKE) $(clean)=$(nios2-boot)
-%.dtb: | scripts
+%.dtb %.dtb.S %.dtb.o: | scripts
$(Q)$(MAKE) $(build)=$(nios2-boot)/dts $(nios2-boot)/dts/$@
dtbs:
diff --git a/arch/nios2/boot/Makefile b/arch/nios2/boot/Makefile
index 007586094dde..0b48f1bf086d 100644
--- a/arch/nios2/boot/Makefile
+++ b/arch/nios2/boot/Makefile
@@ -31,20 +31,6 @@ $(obj)/zImage: $(obj)/compressed/vmlinux FORCE
$(obj)/compressed/vmlinux: $(obj)/vmlinux.gz FORCE
$(Q)$(MAKE) $(build)=$(obj)/compressed $@
-# Rule to build device tree blobs
-DTB_SRC := $(patsubst "%",%,$(CONFIG_NIOS2_DTB_SOURCE))
-
-# Make sure the generated dtb gets removed during clean
-extra-$(CONFIG_NIOS2_DTB_SOURCE_BOOL) += system.dtb
-
-$(obj)/system.dtb: $(DTB_SRC) FORCE
- $(call cmd,dtc)
-
-# Ensure system.dtb exists
-$(obj)/linked_dtb.o: $(obj)/system.dtb
-
-obj-$(CONFIG_NIOS2_DTB_SOURCE_BOOL) += linked_dtb.o
-
targets += $(dtb-y)
$(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y))
diff --git a/arch/nios2/boot/dts/Makefile b/arch/nios2/boot/dts/Makefile
index f66554cd5c45..f6358e395b25 100644
--- a/arch/nios2/boot/dts/Makefile
+++ b/arch/nios2/boot/dts/Makefile
@@ -1 +1,3 @@
# SPDX-License-Identifier: GPL-2.0
+
+obj-y := $(patsubst "%.dts",%.dtb.o,$(CONFIG_NIOS2_DTB_SOURCE))
diff --git a/arch/nios2/boot/linked_dtb.S b/arch/nios2/boot/linked_dtb.S
deleted file mode 100644
index 071f922db338..000000000000
--- a/arch/nios2/boot/linked_dtb.S
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Copyright (C) 2011 Thomas Chou <thomas@wytron.com.tw>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- *
- */
-.section .dtb.init.rodata,"a"
-.incbin "arch/nios2/boot/system.dtb"
--
2.17.1
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH v3 4/9] nios2: fix building all dtbs
2018-09-10 15:03 [PATCH v3 0/9] Devicetree build consolidation Rob Herring
` (2 preceding siblings ...)
2018-09-10 15:03 ` [PATCH v3 3/9] nios2: use common rules to build built-in dtb Rob Herring
@ 2018-09-10 15:03 ` Rob Herring
2018-09-10 15:03 ` [PATCH v3 5/9] c6x: use common built-in dtb support Rob Herring
` (4 subsequent siblings)
8 siblings, 0 replies; 22+ messages in thread
From: Rob Herring @ 2018-09-10 15:03 UTC (permalink / raw)
To: devicetree, linux-kernel, Masahiro Yamada
Cc: Frank Rowand, Ley Foon Tan, nios2-dev
nios2 has a 'dtbs' target, but nothing is added to 'dtb-*' targets and
no dtbs were getting built. This enables building all the dts files in
arch/nios2/boot/dts/ when COMPILE_TEST and OF_ALL_DTBS are enabled.
Cc: Ley Foon Tan <lftan@altera.com>
Cc: nios2-dev@lists.rocketboards.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
arch/nios2/boot/dts/Makefile | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/nios2/boot/dts/Makefile b/arch/nios2/boot/dts/Makefile
index f6358e395b25..a91a0b09be63 100644
--- a/arch/nios2/boot/dts/Makefile
+++ b/arch/nios2/boot/dts/Makefile
@@ -1,3 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
obj-y := $(patsubst "%.dts",%.dtb.o,$(CONFIG_NIOS2_DTB_SOURCE))
+
+dtstree := $(srctree)/$(src)
+dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts))
--
2.17.1
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH v3 5/9] c6x: use common built-in dtb support
2018-09-10 15:03 [PATCH v3 0/9] Devicetree build consolidation Rob Herring
` (3 preceding siblings ...)
2018-09-10 15:03 ` [PATCH v3 4/9] nios2: fix building all dtbs Rob Herring
@ 2018-09-10 15:03 ` Rob Herring
2018-09-10 15:04 ` [PATCH v3 6/9] kbuild: consolidate Devicetree dtb build rules Rob Herring
` (3 subsequent siblings)
8 siblings, 0 replies; 22+ messages in thread
From: Rob Herring @ 2018-09-10 15:03 UTC (permalink / raw)
To: devicetree, linux-kernel, Masahiro Yamada
Cc: Frank Rowand, Mark Salter, Aurelien Jacquiot, linux-c6x-dev
Using the common build support for built-in dtb files just requires
adding a .dtb.o target to obj-y.
The dtb now needs to be copied when unflattened because an init section
is used now.
Cc: Mark Salter <msalter@redhat.com>
Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com>
Cc: linux-c6x-dev@linux-c6x.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
arch/c6x/boot/dts/Makefile | 11 +----------
arch/c6x/boot/dts/linked_dtb.S | 2 --
arch/c6x/include/asm/sections.h | 1 -
arch/c6x/kernel/setup.c | 4 ++--
arch/c6x/kernel/vmlinux.lds.S | 10 ----------
5 files changed, 3 insertions(+), 25 deletions(-)
delete mode 100644 arch/c6x/boot/dts/linked_dtb.S
diff --git a/arch/c6x/boot/dts/Makefile b/arch/c6x/boot/dts/Makefile
index b212d278ebc4..fd937f781d16 100644
--- a/arch/c6x/boot/dts/Makefile
+++ b/arch/c6x/boot/dts/Makefile
@@ -6,14 +6,5 @@
DTC_FLAGS ?= -p 1024
ifneq ($(DTB),)
-obj-y += linked_dtb.o
+obj-y += $(DTB).dtb.o
endif
-
-quiet_cmd_cp = CP $< $@$2
- cmd_cp = cat $< >$@$2 || (rm -f $@ && echo false)
-
-# Generate builtin.dtb from $(DTB).dtb
-$(obj)/builtin.dtb: $(obj)/$(DTB).dtb
- $(call if_changed,cp)
-
-$(obj)/linked_dtb.o: $(obj)/builtin.dtb
diff --git a/arch/c6x/boot/dts/linked_dtb.S b/arch/c6x/boot/dts/linked_dtb.S
deleted file mode 100644
index cf347f1d16ce..000000000000
--- a/arch/c6x/boot/dts/linked_dtb.S
+++ /dev/null
@@ -1,2 +0,0 @@
-.section __fdt_blob,"a"
-.incbin "arch/c6x/boot/dts/builtin.dtb"
diff --git a/arch/c6x/include/asm/sections.h b/arch/c6x/include/asm/sections.h
index d6c591ab5b7e..dc2f15eb3bde 100644
--- a/arch/c6x/include/asm/sections.h
+++ b/arch/c6x/include/asm/sections.h
@@ -8,6 +8,5 @@ extern char _vectors_start[];
extern char _vectors_end[];
extern char _data_lma[];
-extern char _fdt_start[], _fdt_end[];
#endif /* _ASM_C6X_SECTIONS_H */
diff --git a/arch/c6x/kernel/setup.c b/arch/c6x/kernel/setup.c
index 786e36e2f61d..509c5f086496 100644
--- a/arch/c6x/kernel/setup.c
+++ b/arch/c6x/kernel/setup.c
@@ -270,7 +270,7 @@ int __init c6x_add_memory(phys_addr_t start, unsigned long size)
notrace void __init machine_init(unsigned long dt_ptr)
{
void *dtb = __va(dt_ptr);
- void *fdt = _fdt_start;
+ void *fdt = __dtb_start;
/* interrupts must be masked */
set_creg(IER, 2);
@@ -363,7 +363,7 @@ void __init setup_arch(char **cmdline_p)
memory_end >> PAGE_SHIFT);
memblock_reserve(memory_start, bootmap_size);
- unflatten_device_tree();
+ unflatten_and_copy_device_tree();
c6x_cache_init();
diff --git a/arch/c6x/kernel/vmlinux.lds.S b/arch/c6x/kernel/vmlinux.lds.S
index 1fba5b421eee..584bab2bace6 100644
--- a/arch/c6x/kernel/vmlinux.lds.S
+++ b/arch/c6x/kernel/vmlinux.lds.S
@@ -90,16 +90,6 @@ SECTIONS
*(.switch)
}
- . = ALIGN (8) ;
- __fdt_blob : AT(ADDR(__fdt_blob) - LOAD_OFFSET)
- {
- _fdt_start = . ; /* place for fdt blob */
- *(__fdt_blob) ; /* Any link-placed DTB */
- BYTE(0); /* section always has contents */
- . = _fdt_start + 0x4000; /* Pad up to 16kbyte */
- _fdt_end = . ;
- }
-
_etext = .;
/*
--
2.17.1
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH v3 6/9] kbuild: consolidate Devicetree dtb build rules
2018-09-10 15:03 [PATCH v3 0/9] Devicetree build consolidation Rob Herring
` (4 preceding siblings ...)
2018-09-10 15:03 ` [PATCH v3 5/9] c6x: use common built-in dtb support Rob Herring
@ 2018-09-10 15:04 ` Rob Herring
2018-09-11 15:40 ` Rob Herring
2018-09-10 15:04 ` [PATCH v3 7/9] powerpc: enable building all dtbs Rob Herring
` (2 subsequent siblings)
8 siblings, 1 reply; 22+ messages in thread
From: Rob Herring @ 2018-09-10 15:04 UTC (permalink / raw)
To: devicetree, linux-kernel, Masahiro Yamada
Cc: Frank Rowand, Michal Marek, Vineet Gupta, Russell King,
Catalin Marinas, Yoshinori Sato, Michal Simek, Ralf Baechle,
James Hogan, Benjamin Herrenschmidt, Paul Mackerras,
Michael Ellerman, Chris Zankel, Max Filippov, linux-kbuild,
linux-snps-arc, linux-arm-kernel, uclinux-h8-devel, linux-mips,
nios2-dev, linuxppc-dev, linux-xtensa, Will Deacon, Paul Burton,
Ley Foon Tan
There is nothing arch specific about building dtb files other than their
location under /arch/*/boot/dts/. Keeping each arch aligned is a pain.
The dependencies and supported targets are all slightly different.
Also, a cross-compiler for each arch is needed, but really the host
compiler preprocessor is perfectly fine for building dtbs. Move the
build rules to a common location and remove the arch specific ones. This
is done in a single step to avoid warnings about overriding rules.
The build dependencies had been a mixture of 'scripts' and/or 'prepare'.
These pull in several dependencies some of which need a target compiler
(specifically devicetable-offsets.h) and aren't needed to build dtbs.
All that is really needed is dtc, so adjust the dependencies to only be
dtc.
This change enables support 'dtbs_install' on some arches which were
missing the target.
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Paul Burton <paul.burton@mips.com>
Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: linux-kbuild@vger.kernel.org
Cc: linux-snps-arc@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: uclinux-h8-devel@lists.sourceforge.jp
Cc: linux-mips@linux-mips.org
Cc: nios2-dev@lists.rocketboards.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-xtensa@linux-xtensa.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
Makefile | 35 ++++++++++++++++++++++++++++++-
arch/arc/Makefile | 6 ------
arch/arm/Makefile | 20 +-----------------
arch/arm64/Makefile | 17 +--------------
arch/c6x/Makefile | 2 --
arch/h8300/Makefile | 11 +---------
arch/microblaze/Makefile | 4 +---
arch/microblaze/boot/dts/Makefile | 2 ++
arch/mips/Makefile | 15 +------------
arch/nds32/Makefile | 2 +-
arch/nios2/Makefile | 7 -------
arch/nios2/boot/Makefile | 4 ----
arch/powerpc/Makefile | 3 ---
arch/xtensa/Makefile | 12 +----------
scripts/Makefile | 3 +--
scripts/Makefile.lib | 2 +-
scripts/dtc/Makefile | 2 +-
17 files changed, 46 insertions(+), 101 deletions(-)
diff --git a/Makefile b/Makefile
index 19948e556941..c43859eba70f 100644
--- a/Makefile
+++ b/Makefile
@@ -1071,7 +1071,7 @@ include/config/kernel.release: $(srctree)/Makefile FORCE
# Carefully list dependencies so we do not try to build scripts twice
# in parallel
PHONY += scripts
-scripts: scripts_basic asm-generic gcc-plugins $(autoksyms_h)
+scripts: scripts_basic scripts_dtc asm-generic gcc-plugins $(autoksyms_h)
$(Q)$(MAKE) $(build)=$(@)
# Things we need to do before we recursively start building the kernel
@@ -1215,6 +1215,33 @@ kselftest-merge:
$(srctree)/tools/testing/selftests/*/config
+$(Q)$(MAKE) -f $(srctree)/Makefile olddefconfig
+# ---------------------------------------------------------------------------
+# Devicetree files
+
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/boot/dts/),)
+dtstree := arch/$(SRCARCH)/boot/dts
+endif
+
+ifdef CONFIG_OF_EARLY_FLATTREE
+
+%.dtb : scripts_dtc
+ $(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@
+
+PHONY += dtbs dtbs_install
+dtbs: scripts_dtc
+ $(Q)$(MAKE) $(build)=$(dtstree)
+
+dtbs_install: dtbs
+ $(Q)$(MAKE) $(dtbinst)=$(dtstree)
+
+all: dtbs
+
+endif
+
+PHONY += scripts_dtc
+scripts_dtc: scripts_basic
+ $(Q)$(MAKE) $(build)=scripts/dtc
+
# ---------------------------------------------------------------------------
# Modules
@@ -1424,6 +1451,12 @@ help:
@echo ' kselftest-merge - Merge all the config dependencies of kselftest to existing'
@echo ' .config.'
@echo ''
+ @$(if $(dtstree), \
+ echo 'Devicetree:'; \
+ echo '* dtbs - Build device tree blobs for enabled boards'; \
+ echo ' dtbs_install - Install dtbs to $(INSTALL_DTBS_PATH)'; \
+ echo '')
+
@echo 'Userspace tools targets:'
@echo ' use "make tools/help"'
@echo ' or "cd tools; make help"'
diff --git a/arch/arc/Makefile b/arch/arc/Makefile
index fb026196aaab..5c7bc6d62f43 100644
--- a/arch/arc/Makefile
+++ b/arch/arc/Makefile
@@ -132,11 +132,5 @@ boot_targets += uImage uImage.bin uImage.gz
$(boot_targets): vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
-%.dtb %.dtb.S %.dtb.o: scripts
- $(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@
-
-dtbs: scripts
- $(Q)$(MAKE) $(build)=$(boot)/dts
-
archclean:
$(Q)$(MAKE) $(clean)=$(boot)
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index d1516f85f25d..161c2df6567e 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -307,12 +307,7 @@ else
KBUILD_IMAGE := $(boot)/zImage
endif
-# Build the DT binary blobs if we have OF configured
-ifeq ($(CONFIG_USE_OF),y)
-KBUILD_DTBS := dtbs
-endif
-
-all: $(notdir $(KBUILD_IMAGE)) $(KBUILD_DTBS)
+all: $(notdir $(KBUILD_IMAGE))
archheaders:
@@ -339,17 +334,6 @@ $(BOOT_TARGETS): vmlinux
$(INSTALL_TARGETS):
$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
-%.dtb: | scripts
- $(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $(boot)/dts/$@
-
-PHONY += dtbs dtbs_install
-
-dtbs: prepare scripts
- $(Q)$(MAKE) $(build)=$(boot)/dts
-
-dtbs_install:
- $(Q)$(MAKE) $(dtbinst)=$(boot)/dts
-
PHONY += vdso_install
vdso_install:
ifeq ($(CONFIG_VDSO),y)
@@ -371,8 +355,6 @@ define archhelp
echo ' uImage - U-Boot wrapped zImage'
echo ' bootpImage - Combined zImage and initial RAM disk'
echo ' (supply initrd image via make variable INITRD=<path>)'
- echo '* dtbs - Build device tree blobs for enabled boards'
- echo ' dtbs_install - Install dtbs to $(INSTALL_DTBS_PATH)'
echo ' install - Install uncompressed kernel'
echo ' zinstall - Install compressed kernel'
echo ' uinstall - Install U-Boot wrapped compressed kernel'
diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
index 106039d25e2f..b4e994cd3a42 100644
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@@ -113,9 +113,8 @@ core-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a
# Default target when executing plain make
boot := arch/arm64/boot
KBUILD_IMAGE := $(boot)/Image.gz
-KBUILD_DTBS := dtbs
-all: Image.gz $(KBUILD_DTBS)
+all: Image.gz
Image: vmlinux
@@ -127,17 +126,6 @@ Image.%: Image
zinstall install:
$(Q)$(MAKE) $(build)=$(boot) $@
-%.dtb: scripts
- $(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@
-
-PHONY += dtbs dtbs_install
-
-dtbs: prepare scripts
- $(Q)$(MAKE) $(build)=$(boot)/dts
-
-dtbs_install:
- $(Q)$(MAKE) $(dtbinst)=$(boot)/dts
-
PHONY += vdso_install
vdso_install:
$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso $@
@@ -145,7 +133,6 @@ vdso_install:
# We use MRPROPER_FILES and CLEAN_FILES now
archclean:
$(Q)$(MAKE) $(clean)=$(boot)
- $(Q)$(MAKE) $(clean)=$(boot)/dts
# We need to generate vdso-offsets.h before compiling certain files in kernel/.
# In order to do that, we should use the archprepare target, but we can't since
@@ -160,8 +147,6 @@ vdso_prepare: prepare0
define archhelp
echo '* Image.gz - Compressed kernel image (arch/$(ARCH)/boot/Image.gz)'
echo ' Image - Uncompressed kernel image (arch/$(ARCH)/boot/Image)'
- echo '* dtbs - Build device tree blobs for enabled boards'
- echo ' dtbs_install - Install dtbs to $(INSTALL_DTBS_PATH)'
echo ' install - Install uncompressed kernel'
echo ' zinstall - Install compressed kernel'
echo ' Install using (your) ~/bin/installkernel or'
diff --git a/arch/c6x/Makefile b/arch/c6x/Makefile
index 3fe8a948e94c..b7aa854f7008 100644
--- a/arch/c6x/Makefile
+++ b/arch/c6x/Makefile
@@ -40,9 +40,7 @@ boot := arch/$(ARCH)/boot
DTB:=$(subst dtbImage.,,$(filter dtbImage.%, $(MAKECMDGOALS)))
export DTB
-ifneq ($(DTB),)
core-y += $(boot)/dts/
-endif
# With make 3.82 we cannot mix normal and wildcard targets
diff --git a/arch/h8300/Makefile b/arch/h8300/Makefile
index 58634e6bae92..4003ddc616e1 100644
--- a/arch/h8300/Makefile
+++ b/arch/h8300/Makefile
@@ -31,21 +31,12 @@ CROSS_COMPILE := h8300-unknown-linux-
endif
core-y += arch/$(ARCH)/kernel/ arch/$(ARCH)/mm/
-ifneq '$(CONFIG_H8300_BUILTIN_DTB)' '""'
-core-y += arch/h8300/boot/dts/
-endif
+core-y += arch/$(ARCH)/boot/dts/
libs-y += arch/$(ARCH)/lib/
boot := arch/h8300/boot
-%.dtb %.dtb.S %.dtb.o: | scripts
- $(Q)$(MAKE) $(build)=arch/h8300/boot/dts arch/h8300/boot/dts/$@
-
-PHONY += dtbs
-dtbs: scripts
- $(Q)$(MAKE) $(build)=arch/h8300/boot/dts
-
archmrproper:
archclean:
diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
index 4f3ab5707265..0823d291fbeb 100644
--- a/arch/microblaze/Makefile
+++ b/arch/microblaze/Makefile
@@ -65,9 +65,7 @@ boot := arch/microblaze/boot
# Are we making a simpleImage.<boardname> target? If so, crack out the boardname
DTB:=$(subst simpleImage.,,$(filter simpleImage.%, $(MAKECMDGOALS)))
-ifneq ($(DTB),)
- core-y += $(boot)/dts/
-endif
+core-y += $(boot)/dts/
# defines filename extension depending memory management type
ifeq ($(CONFIG_MMU),)
diff --git a/arch/microblaze/boot/dts/Makefile b/arch/microblaze/boot/dts/Makefile
index 1f77913d404d..fe9af267f598 100644
--- a/arch/microblaze/boot/dts/Makefile
+++ b/arch/microblaze/boot/dts/Makefile
@@ -1,6 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
#
+ifneq ($(DTB),)
obj-y += linked_dtb.o
# Ensure system.dtb exists
@@ -11,6 +12,7 @@ ifneq ($(DTB),system)
$(obj)/system.dtb: $(obj)/$(DTB).dtb
$(call if_changed,cp)
endif
+endif
quiet_cmd_cp = CP $< $@$2
cmd_cp = cat $< >$@$2 || (rm -f $@ && echo false)
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index d74b3742fa5d..d43eeaa6d75b 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -407,18 +407,7 @@ endif
CLEAN_FILES += vmlinux.32 vmlinux.64
# device-trees
-core-$(CONFIG_BUILTIN_DTB) += arch/mips/boot/dts/
-
-%.dtb %.dtb.S %.dtb.o: | scripts
- $(Q)$(MAKE) $(build)=arch/mips/boot/dts arch/mips/boot/dts/$@
-
-PHONY += dtbs
-dtbs: scripts
- $(Q)$(MAKE) $(build)=arch/mips/boot/dts
-
-PHONY += dtbs_install
-dtbs_install:
- $(Q)$(MAKE) $(dtbinst)=arch/mips/boot/dts
+core-y += arch/mips/boot/dts/
archprepare:
ifdef CONFIG_MIPS32_N32
@@ -461,8 +450,6 @@ define archhelp
echo ' uImage.lzma - U-Boot image (lzma)'
echo ' uImage.lzo - U-Boot image (lzo)'
echo ' uzImage.bin - U-Boot image (self-extracting)'
- echo ' dtbs - Device-tree blobs for enabled boards'
- echo ' dtbs_install - Install dtbs to $(INSTALL_DTBS_PATH)'
echo
echo ' These will be default as appropriate for a configured platform.'
echo
diff --git a/arch/nds32/Makefile b/arch/nds32/Makefile
index 63f4f173e5f4..adcac830d051 100644
--- a/arch/nds32/Makefile
+++ b/arch/nds32/Makefile
@@ -43,7 +43,7 @@ CHECKFLAGS += -D__NDS32_EB__
endif
boot := arch/nds32/boot
-core-$(BUILTIN_DTB) += $(boot)/dts/
+core-y += $(boot)/dts/
.PHONY: FORCE
diff --git a/arch/nios2/Makefile b/arch/nios2/Makefile
index db2e78fe65c7..52c03e60b114 100644
--- a/arch/nios2/Makefile
+++ b/arch/nios2/Makefile
@@ -56,12 +56,6 @@ all: vmImage
archclean:
$(Q)$(MAKE) $(clean)=$(nios2-boot)
-%.dtb %.dtb.S %.dtb.o: | scripts
- $(Q)$(MAKE) $(build)=$(nios2-boot)/dts $(nios2-boot)/dts/$@
-
-dtbs:
- $(Q)$(MAKE) $(build)=$(nios2-boot)/dts
-
$(BOOT_TARGETS): vmlinux
$(Q)$(MAKE) $(build)=$(nios2-boot) $(nios2-boot)/$@
@@ -74,5 +68,4 @@ define archhelp
echo ' (your) ~/bin/$(INSTALLKERNEL) or'
echo ' (distribution) /sbin/$(INSTALLKERNEL) or'
echo ' install to $$(INSTALL_PATH)'
- echo ' dtbs - Build device tree blobs for enabled boards'
endef
diff --git a/arch/nios2/boot/Makefile b/arch/nios2/boot/Makefile
index 0b48f1bf086d..37dfc7e584bc 100644
--- a/arch/nios2/boot/Makefile
+++ b/arch/nios2/boot/Makefile
@@ -31,9 +31,5 @@ $(obj)/zImage: $(obj)/compressed/vmlinux FORCE
$(obj)/compressed/vmlinux: $(obj)/vmlinux.gz FORCE
$(Q)$(MAKE) $(build)=$(obj)/compressed $@
-targets += $(dtb-y)
-
-$(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y))
-
install:
sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $(BOOTIMAGE) System.map "$(INSTALL_PATH)"
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 53ea887eb34e..42f225f6ec93 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -293,9 +293,6 @@ $(BOOT_TARGETS2): vmlinux
bootwrapper_install:
$(Q)$(MAKE) $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
-%.dtb: scripts
- $(Q)$(MAKE) $(build)=$(boot)/dts $(patsubst %,$(boot)/dts/%,$@)
-
# Used to create 'merged defconfigs'
# To use it $(call) it with the first argument as the base defconfig
# and the second argument as a space separated list of .config files to merge,
diff --git a/arch/xtensa/Makefile b/arch/xtensa/Makefile
index 295c120ed099..13fd3301c517 100644
--- a/arch/xtensa/Makefile
+++ b/arch/xtensa/Makefile
@@ -84,28 +84,18 @@ LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
head-y := arch/xtensa/kernel/head.o
core-y += arch/xtensa/kernel/ arch/xtensa/mm/
core-y += $(buildvar) $(buildplf)
+core-y += arch/xtensa/boot/dts/
libs-y += arch/xtensa/lib/ $(LIBGCC)
drivers-$(CONFIG_OPROFILE) += arch/xtensa/oprofile/
-ifneq ($(CONFIG_BUILTIN_DTB),"")
-core-$(CONFIG_OF) += arch/xtensa/boot/dts/
-endif
-
boot := arch/xtensa/boot
all Image zImage uImage: vmlinux
$(Q)$(MAKE) $(build)=$(boot) $@
-%.dtb:
- $(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@
-
-dtbs: scripts
- $(Q)$(MAKE) $(build)=$(boot)/dts
-
define archhelp
@echo '* Image - Kernel ELF image with reset vector'
@echo '* zImage - Compressed kernel image (arch/xtensa/boot/images/zImage.*)'
@echo '* uImage - U-Boot wrapped image'
- @echo ' dtbs - Build device tree blobs for enabled boards'
endef
diff --git a/scripts/Makefile b/scripts/Makefile
index 61affa300d25..ece52ff20171 100644
--- a/scripts/Makefile
+++ b/scripts/Makefile
@@ -39,8 +39,7 @@ build_unifdef: $(obj)/unifdef
subdir-$(CONFIG_MODVERSIONS) += genksyms
subdir-y += mod
subdir-$(CONFIG_SECURITY_SELINUX) += selinux
-subdir-$(CONFIG_DTC) += dtc
subdir-$(CONFIG_GDB_SCRIPTS) += gdb
# Let clean descend into subdirs
-subdir- += basic kconfig package gcc-plugins
+subdir- += basic dtc kconfig package gcc-plugins
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 61e596650ed3..8fe4468f9bda 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -283,7 +283,7 @@ $(obj)/%.dtb.S: $(obj)/%.dtb FORCE
quiet_cmd_dtc = DTC $@
cmd_dtc = mkdir -p $(dir ${dtc-tmp}) ; \
- $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \
+ $(HOSTCC) -E $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \
$(DTC) -O dtb -o $@ -b 0 \
$(addprefix -i,$(dir $<) $(DTC_INCLUDE)) $(DTC_FLAGS) \
-d $(depfile).dtc.tmp $(dtc-tmp) ; \
diff --git a/scripts/dtc/Makefile b/scripts/dtc/Makefile
index 1c943e03eaf2..e535b457babb 100644
--- a/scripts/dtc/Makefile
+++ b/scripts/dtc/Makefile
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
# scripts/dtc makefile
-hostprogs-y := dtc
+hostprogs-$(CONFIG_DTC) := dtc
always := $(hostprogs-y)
dtc-objs := dtc.o flattree.o fstree.o data.o livetree.o treesource.o \
--
2.17.1
^ permalink raw reply related [flat|nested] 22+ messages in thread* Re: [PATCH v3 6/9] kbuild: consolidate Devicetree dtb build rules
2018-09-10 15:04 ` [PATCH v3 6/9] kbuild: consolidate Devicetree dtb build rules Rob Herring
@ 2018-09-11 15:40 ` Rob Herring
2018-09-12 1:00 ` Masahiro Yamada
0 siblings, 1 reply; 22+ messages in thread
From: Rob Herring @ 2018-09-11 15:40 UTC (permalink / raw)
To: devicetree, linux-kernel, Masahiro Yamada
Cc: Frank Rowand, Michal Marek, Vineet Gupta, Russell King,
Catalin Marinas, Yoshinori Sato, Michal Simek, Ralf Baechle,
James Hogan, Benjamin Herrenschmidt, Paul Mackerras,
Michael Ellerman, Chris Zankel, Max Filippov,
Linux Kbuild mailing list, arcml,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
moderated list:H8/300 ARCHITECTURE, Linux-MIPS, nios2-dev,
linuxppc-dev, linux-xtensa, Will Deacon, Paul Burton,
Ley Foon Tan
On Mon, Sep 10, 2018 at 10:04 AM Rob Herring <robh@kernel.org> wrote:
>
> There is nothing arch specific about building dtb files other than their
> location under /arch/*/boot/dts/. Keeping each arch aligned is a pain.
> The dependencies and supported targets are all slightly different.
> Also, a cross-compiler for each arch is needed, but really the host
> compiler preprocessor is perfectly fine for building dtbs. Move the
> build rules to a common location and remove the arch specific ones. This
> is done in a single step to avoid warnings about overriding rules.
>
> The build dependencies had been a mixture of 'scripts' and/or 'prepare'.
> These pull in several dependencies some of which need a target compiler
> (specifically devicetable-offsets.h) and aren't needed to build dtbs.
> All that is really needed is dtc, so adjust the dependencies to only be
> dtc.
>
> This change enables support 'dtbs_install' on some arches which were
> missing the target.
[...]
> @@ -1215,6 +1215,33 @@ kselftest-merge:
> $(srctree)/tools/testing/selftests/*/config
> +$(Q)$(MAKE) -f $(srctree)/Makefile olddefconfig
>
> +# ---------------------------------------------------------------------------
> +# Devicetree files
> +
> +ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/boot/dts/),)
> +dtstree := arch/$(SRCARCH)/boot/dts
> +endif
> +
> +ifdef CONFIG_OF_EARLY_FLATTREE
This can be true when dtstree is unset. So this line should be this
instead to fix the 0-day reported error:
ifneq ($(dtstree),)
> +
> +%.dtb : scripts_dtc
> + $(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@
> +
> +PHONY += dtbs dtbs_install
> +dtbs: scripts_dtc
> + $(Q)$(MAKE) $(build)=$(dtstree)
> +
> +dtbs_install: dtbs
> + $(Q)$(MAKE) $(dtbinst)=$(dtstree)
> +
> +all: dtbs
> +
> +endif
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH v3 6/9] kbuild: consolidate Devicetree dtb build rules
2018-09-11 15:40 ` Rob Herring
@ 2018-09-12 1:00 ` Masahiro Yamada
2018-09-13 15:51 ` Geert Uytterhoeven
0 siblings, 1 reply; 22+ messages in thread
From: Masahiro Yamada @ 2018-09-12 1:00 UTC (permalink / raw)
To: Rob Herring
Cc: DTML, linux-kernel, Frank Rowand, Michal Marek, Vineet Gupta,
Russell King, Catalin Marinas, Yoshinori Sato, Michal Simek,
Ralf Baechle, James Hogan, Benjamin Herrenschmidt,
Paul Mackerras, Michael Ellerman, Chris Zankel, Max Filippov,
Linux Kbuild mailing list, arcml,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
moderated list:H8/300 ARCHITECTURE, Linux-MIPS, nios2-dev,
linuxppc-dev, linux-xtensa, Will Deacon, Paul Burton,
Ley Foon Tan
2018-09-12 0:40 GMT+09:00 Rob Herring <robh@kernel.org>:
> On Mon, Sep 10, 2018 at 10:04 AM Rob Herring <robh@kernel.org> wrote:
>>
>> There is nothing arch specific about building dtb files other than their
>> location under /arch/*/boot/dts/. Keeping each arch aligned is a pain.
>> The dependencies and supported targets are all slightly different.
>> Also, a cross-compiler for each arch is needed, but really the host
>> compiler preprocessor is perfectly fine for building dtbs. Move the
>> build rules to a common location and remove the arch specific ones. This
>> is done in a single step to avoid warnings about overriding rules.
>>
>> The build dependencies had been a mixture of 'scripts' and/or 'prepare'.
>> These pull in several dependencies some of which need a target compiler
>> (specifically devicetable-offsets.h) and aren't needed to build dtbs.
>> All that is really needed is dtc, so adjust the dependencies to only be
>> dtc.
>>
>> This change enables support 'dtbs_install' on some arches which were
>> missing the target.
>
> [...]
>
>> @@ -1215,6 +1215,33 @@ kselftest-merge:
>> $(srctree)/tools/testing/selftests/*/config
>> +$(Q)$(MAKE) -f $(srctree)/Makefile olddefconfig
>>
>> +# ---------------------------------------------------------------------------
>> +# Devicetree files
>> +
>> +ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/boot/dts/),)
>> +dtstree := arch/$(SRCARCH)/boot/dts
>> +endif
>> +
>> +ifdef CONFIG_OF_EARLY_FLATTREE
>
> This can be true when dtstree is unset. So this line should be this
> instead to fix the 0-day reported error:
>
> ifneq ($(dtstree),)
>
>> +
>> +%.dtb : scripts_dtc
>> + $(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@
>> +
>> +PHONY += dtbs dtbs_install
>> +dtbs: scripts_dtc
>> + $(Q)$(MAKE) $(build)=$(dtstree)
>> +
>> +dtbs_install: dtbs
>> + $(Q)$(MAKE) $(dtbinst)=$(dtstree)
>> +
>> +all: dtbs
>> +
>> +endif
Ah, right.
Even x86 can enable OF and OF_UNITTEST.
Another solution might be,
guard it by 'depends on ARCH_SUPPORTS_OF'.
This is actually what ACPI does.
menuconfig ACPI
bool "ACPI (Advanced Configuration and Power Interface) Support"
depends on ARCH_SUPPORTS_ACPI
...
--
Best Regards
Masahiro Yamada
^ permalink raw reply [flat|nested] 22+ messages in thread* Re: [PATCH v3 6/9] kbuild: consolidate Devicetree dtb build rules
2018-09-12 1:00 ` Masahiro Yamada
@ 2018-09-13 15:51 ` Geert Uytterhoeven
2018-09-23 10:31 ` Masahiro Yamada
2018-09-28 17:21 ` Andreas Färber
0 siblings, 2 replies; 22+ messages in thread
From: Geert Uytterhoeven @ 2018-09-13 15:51 UTC (permalink / raw)
To: Masahiro Yamada
Cc: Rob Herring,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
Linux Kernel Mailing List, Frank Rowand, Michal Marek,
Vineet Gupta, Russell King, Catalin Marinas, Yoshinori Sato,
Michal Simek, Ralf Baechle, James Hogan, Benjamin Herrenschmidt,
Paul Mackerras, Michael Ellerman, Chris Zankel, Max Filippov,
linux-kbuild, arcml, Linux ARM,
moderated list:H8/300 ARCHITECTURE, Linux MIPS Mailing List,
nios2-dev, linuxppc-dev, linux-xtensa, Will Deacon, Paul Burton,
ley.foon.tan
Hi Yamada-san,
On Wed, Sep 12, 2018 at 3:02 AM Masahiro Yamada
<yamada.masahiro@socionext.com> wrote:
> 2018-09-12 0:40 GMT+09:00 Rob Herring <robh@kernel.org>:
> > On Mon, Sep 10, 2018 at 10:04 AM Rob Herring <robh@kernel.org> wrote:
> >> There is nothing arch specific about building dtb files other than their
> >> location under /arch/*/boot/dts/. Keeping each arch aligned is a pain.
> >> The dependencies and supported targets are all slightly different.
> >> Also, a cross-compiler for each arch is needed, but really the host
> >> compiler preprocessor is perfectly fine for building dtbs. Move the
> >> build rules to a common location and remove the arch specific ones. This
> >> is done in a single step to avoid warnings about overriding rules.
> >>
> >> The build dependencies had been a mixture of 'scripts' and/or 'prepare'.
> >> These pull in several dependencies some of which need a target compiler
> >> (specifically devicetable-offsets.h) and aren't needed to build dtbs.
> >> All that is really needed is dtc, so adjust the dependencies to only be
> >> dtc.
> >>
> >> This change enables support 'dtbs_install' on some arches which were
> >> missing the target.
> >
> > [...]
> >
> >> @@ -1215,6 +1215,33 @@ kselftest-merge:
> >> $(srctree)/tools/testing/selftests/*/config
> >> +$(Q)$(MAKE) -f $(srctree)/Makefile olddefconfig
> >>
> >> +# ---------------------------------------------------------------------------
> >> +# Devicetree files
> >> +
> >> +ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/boot/dts/),)
> >> +dtstree := arch/$(SRCARCH)/boot/dts
> >> +endif
> >> +
> >> +ifdef CONFIG_OF_EARLY_FLATTREE
> >
> > This can be true when dtstree is unset. So this line should be this
> > instead to fix the 0-day reported error:
> >
> > ifneq ($(dtstree),)
> >
> >> +
> >> +%.dtb : scripts_dtc
> >> + $(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@
> >> +
> >> +PHONY += dtbs dtbs_install
> >> +dtbs: scripts_dtc
> >> + $(Q)$(MAKE) $(build)=$(dtstree)
> >> +
> >> +dtbs_install: dtbs
> >> + $(Q)$(MAKE) $(dtbinst)=$(dtstree)
> >> +
> >> +all: dtbs
> >> +
> >> +endif
>
>
> Ah, right.
> Even x86 can enable OF and OF_UNITTEST.
>
>
>
> Another solution might be,
> guard it by 'depends on ARCH_SUPPORTS_OF'.
>
>
>
> This is actually what ACPI does.
>
> menuconfig ACPI
> bool "ACPI (Advanced Configuration and Power Interface) Support"
> depends on ARCH_SUPPORTS_ACPI
> ...
ACPI is a real platform feature, as it depends on firmware.
CONFIG_OF can be enabled, and DT overlays can be loaded, on any platform,
even if it has ACPI ;-)
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 22+ messages in thread* Re: [PATCH v3 6/9] kbuild: consolidate Devicetree dtb build rules
2018-09-13 15:51 ` Geert Uytterhoeven
@ 2018-09-23 10:31 ` Masahiro Yamada
2018-09-28 15:41 ` Rob Herring
2018-09-28 17:21 ` Andreas Färber
1 sibling, 1 reply; 22+ messages in thread
From: Masahiro Yamada @ 2018-09-23 10:31 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Rob Herring,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
Linux Kernel Mailing List, Frank Rowand, Michal Marek,
Vineet Gupta, Russell King, Catalin Marinas, Yoshinori Sato,
Michal Simek, Ralf Baechle, James Hogan, Benjamin Herrenschmidt,
Paul Mackerras, Michael Ellerman, Chris Zankel, Max Filippov,
linux-kbuild, arcml, Linux ARM,
moderated list:H8/300 ARCHITECTURE, Linux MIPS Mailing List,
nios2-dev, linuxppc-dev, linux-xtensa, Will Deacon, Paul Burton,
Ley Foon Tan
2018-09-13 11:51 GMT-04:00 Geert Uytterhoeven <geert@linux-m68k.org>:
> Hi Yamada-san,
>
> On Wed, Sep 12, 2018 at 3:02 AM Masahiro Yamada
> <yamada.masahiro@socionext.com> wrote:
>> 2018-09-12 0:40 GMT+09:00 Rob Herring <robh@kernel.org>:
>> > On Mon, Sep 10, 2018 at 10:04 AM Rob Herring <robh@kernel.org> wrote:
>> >> There is nothing arch specific about building dtb files other than their
>> >> location under /arch/*/boot/dts/. Keeping each arch aligned is a pain.
>> >> The dependencies and supported targets are all slightly different.
>> >> Also, a cross-compiler for each arch is needed, but really the host
>> >> compiler preprocessor is perfectly fine for building dtbs. Move the
>> >> build rules to a common location and remove the arch specific ones. This
>> >> is done in a single step to avoid warnings about overriding rules.
>> >>
>> >> The build dependencies had been a mixture of 'scripts' and/or 'prepare'.
>> >> These pull in several dependencies some of which need a target compiler
>> >> (specifically devicetable-offsets.h) and aren't needed to build dtbs.
>> >> All that is really needed is dtc, so adjust the dependencies to only be
>> >> dtc.
>> >>
>> >> This change enables support 'dtbs_install' on some arches which were
>> >> missing the target.
>> >
>> > [...]
>> >
>> >> @@ -1215,6 +1215,33 @@ kselftest-merge:
>> >> $(srctree)/tools/testing/selftests/*/config
>> >> +$(Q)$(MAKE) -f $(srctree)/Makefile olddefconfig
>> >>
>> >> +# ---------------------------------------------------------------------------
>> >> +# Devicetree files
>> >> +
>> >> +ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/boot/dts/),)
>> >> +dtstree := arch/$(SRCARCH)/boot/dts
>> >> +endif
>> >> +
>> >> +ifdef CONFIG_OF_EARLY_FLATTREE
>> >
>> > This can be true when dtstree is unset. So this line should be this
>> > instead to fix the 0-day reported error:
>> >
>> > ifneq ($(dtstree),)
>> >
>> >> +
>> >> +%.dtb : scripts_dtc
>> >> + $(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@
>> >> +
>> >> +PHONY += dtbs dtbs_install
>> >> +dtbs: scripts_dtc
>> >> + $(Q)$(MAKE) $(build)=$(dtstree)
>> >> +
>> >> +dtbs_install: dtbs
>> >> + $(Q)$(MAKE) $(dtbinst)=$(dtstree)
>> >> +
>> >> +all: dtbs
>> >> +
>> >> +endif
>>
>>
>> Ah, right.
>> Even x86 can enable OF and OF_UNITTEST.
>>
>>
>>
>> Another solution might be,
>> guard it by 'depends on ARCH_SUPPORTS_OF'.
>>
>>
>>
>> This is actually what ACPI does.
>>
>> menuconfig ACPI
>> bool "ACPI (Advanced Configuration and Power Interface) Support"
>> depends on ARCH_SUPPORTS_ACPI
>> ...
>
> ACPI is a real platform feature, as it depends on firmware.
>
> CONFIG_OF can be enabled, and DT overlays can be loaded, on any platform,
> even if it has ACPI ;-)
>
OK, understood.
Thanks!
--
Best Regards
Masahiro Yamada
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH v3 6/9] kbuild: consolidate Devicetree dtb build rules
2018-09-23 10:31 ` Masahiro Yamada
@ 2018-09-28 15:41 ` Rob Herring
2018-10-01 5:49 ` Masahiro Yamada
0 siblings, 1 reply; 22+ messages in thread
From: Rob Herring @ 2018-09-28 15:41 UTC (permalink / raw)
To: Masahiro Yamada
Cc: Geert Uytterhoeven,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
Linux Kernel Mailing List, Frank Rowand, Michal Marek,
Vineet Gupta, Russell King, Catalin Marinas, Yoshinori Sato,
Michal Simek, Ralf Baechle, James Hogan, Benjamin Herrenschmidt,
Paul Mackerras, Michael Ellerman, Chris Zankel, Max Filippov,
linux-kbuild, arcml, Linux ARM,
moderated list:H8/300 ARCHITECTURE, Linux MIPS Mailing List,
nios2-dev, linuxppc-dev, linux-xtensa, Will Deacon, Paul Burton,
Ley Foon Tan
On Sun, Sep 23, 2018 at 06:31:14AM -0400, Masahiro Yamada wrote:
> 2018-09-13 11:51 GMT-04:00 Geert Uytterhoeven <geert@linux-m68k.org>:
> > Hi Yamada-san,
> >
> > On Wed, Sep 12, 2018 at 3:02 AM Masahiro Yamada
> > <yamada.masahiro@socionext.com> wrote:
> >> 2018-09-12 0:40 GMT+09:00 Rob Herring <robh@kernel.org>:
> >> > On Mon, Sep 10, 2018 at 10:04 AM Rob Herring <robh@kernel.org> wrote:
> >> >> There is nothing arch specific about building dtb files other than their
> >> >> location under /arch/*/boot/dts/. Keeping each arch aligned is a pain.
> >> >> The dependencies and supported targets are all slightly different.
> >> >> Also, a cross-compiler for each arch is needed, but really the host
> >> >> compiler preprocessor is perfectly fine for building dtbs. Move the
> >> >> build rules to a common location and remove the arch specific ones. This
> >> >> is done in a single step to avoid warnings about overriding rules.
> >> >>
> >> >> The build dependencies had been a mixture of 'scripts' and/or 'prepare'.
> >> >> These pull in several dependencies some of which need a target compiler
> >> >> (specifically devicetable-offsets.h) and aren't needed to build dtbs.
> >> >> All that is really needed is dtc, so adjust the dependencies to only be
> >> >> dtc.
> >> >>
> >> >> This change enables support 'dtbs_install' on some arches which were
> >> >> missing the target.
> >> >
> >> > [...]
> >> >
> >> >> @@ -1215,6 +1215,33 @@ kselftest-merge:
> >> >> $(srctree)/tools/testing/selftests/*/config
> >> >> +$(Q)$(MAKE) -f $(srctree)/Makefile olddefconfig
> >> >>
> >> >> +# ---------------------------------------------------------------------------
> >> >> +# Devicetree files
> >> >> +
> >> >> +ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/boot/dts/),)
> >> >> +dtstree := arch/$(SRCARCH)/boot/dts
> >> >> +endif
> >> >> +
> >> >> +ifdef CONFIG_OF_EARLY_FLATTREE
> >> >
> >> > This can be true when dtstree is unset. So this line should be this
> >> > instead to fix the 0-day reported error:
> >> >
> >> > ifneq ($(dtstree),)
> >> >
> >> >> +
> >> >> +%.dtb : scripts_dtc
> >> >> + $(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@
> >> >> +
> >> >> +PHONY += dtbs dtbs_install
> >> >> +dtbs: scripts_dtc
> >> >> + $(Q)$(MAKE) $(build)=$(dtstree)
> >> >> +
> >> >> +dtbs_install: dtbs
> >> >> + $(Q)$(MAKE) $(dtbinst)=$(dtstree)
> >> >> +
> >> >> +all: dtbs
> >> >> +
> >> >> +endif
> >>
> >>
> >> Ah, right.
> >> Even x86 can enable OF and OF_UNITTEST.
> >>
> >>
> >>
> >> Another solution might be,
> >> guard it by 'depends on ARCH_SUPPORTS_OF'.
> >>
> >>
> >>
> >> This is actually what ACPI does.
> >>
> >> menuconfig ACPI
> >> bool "ACPI (Advanced Configuration and Power Interface) Support"
> >> depends on ARCH_SUPPORTS_ACPI
> >> ...
> >
> > ACPI is a real platform feature, as it depends on firmware.
> >
> > CONFIG_OF can be enabled, and DT overlays can be loaded, on any platform,
> > even if it has ACPI ;-)
> >
>
> OK, understood.
Any other comments on this? I'd like to get the series into linux-next
soon.
There was one other problem 0-day reported when building with
CONFIG_OF=n while setting CONFIG_OF_ALL_DTBS=y on the kernel command
line. The problem is dtc is not built as setting options on the command
line doesn't invoke kconfig select(s). This can be fixed by also
adding CONFIG_DTC=y to the command line, always building dtc regardless
of Kconfig, or making 'all' conditionally dependent on 'dtbs'. I've gone
with the last option as that is how this problem was avoided before.
So the hunk in question with the 2 fixes now looks like this:
@@ -1215,6 +1215,35 @@ kselftest-merge:
$(srctree)/tools/testing/selftests/*/config
+$(Q)$(MAKE) -f $(srctree)/Makefile olddefconfig
+#
---------------------------------------------------------------------------
+# Devicetree files
+
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/boot/dts/),)
+dtstree := arch/$(SRCARCH)/boot/dts
+endif
+
+ifneq ($(dtstree),)
+
+%.dtb : scripts_dtc
+ $(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@
+
+PHONY += dtbs dtbs_install
+dtbs: scripts_dtc
+ $(Q)$(MAKE) $(build)=$(dtstree)
+
+dtbs_install: dtbs
+ $(Q)$(MAKE) $(dtbinst)=$(dtstree)
+
+ifdef CONFIG_OF_EARLY_FLATTREE
+all: dtbs
+endif
+
+endif
+
+PHONY += scripts_dtc
+scripts_dtc: scripts_basic
+ $(Q)$(MAKE) $(build)=scripts/dtc
+
#
---------------------------------------------------------------------------
# Modules
^ permalink raw reply [flat|nested] 22+ messages in thread* Re: [PATCH v3 6/9] kbuild: consolidate Devicetree dtb build rules
2018-09-28 15:41 ` Rob Herring
@ 2018-10-01 5:49 ` Masahiro Yamada
2018-10-01 13:25 ` Rob Herring
0 siblings, 1 reply; 22+ messages in thread
From: Masahiro Yamada @ 2018-10-01 5:49 UTC (permalink / raw)
To: Rob Herring
Cc: Geert Uytterhoeven, DTML, Linux Kernel Mailing List,
Frank Rowand, Michal Marek, Vineet Gupta, Russell King,
Catalin Marinas, Yoshinori Sato, Michal Simek, Ralf Baechle,
James Hogan, Benjamin Herrenschmidt, Paul Mackerras,
Michael Ellerman, Chris Zankel, Max Filippov,
Linux Kbuild mailing list, arcml, linux-arm-kernel,
moderated list:H8/300 ARCHITECTURE, Linux-MIPS, nios2-dev,
linuxppc-dev, linux-xtensa, Will Deacon, Paul Burton,
Ley Foon Tan
Hi Rob,
2018年9月29日(土) 0:43 Rob Herring <robh@kernel.org>:
> +#
> ---------------------------------------------------------------------------
> +# Devicetree files
> +
> +ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/boot/dts/),)
> +dtstree := arch/$(SRCARCH)/boot/dts
> +endif
> +
> +ifneq ($(dtstree),)
> +
> +%.dtb : scripts_dtc
%.dtb: prepare3 prepare
because we need to make sure KERNELRELEASE
is correctly defined before dtbs_install happens.
> + $(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@
> +
> +PHONY += dtbs dtbs_install
> +dtbs: scripts_dtc
dtbs: prepare3 scripts_dtc
> + $(Q)$(MAKE) $(build)=$(dtstree)
> +
> +dtbs_install: dtbs
Please do not have dtbs_install to depend on dtbs.
No install targets should ever trigger building anything
in the source tree.
For the background, see the commit log of
19514fc665ffbce624785f76ee7ad0ea6378a527
> + $(Q)$(MAKE) $(dtbinst)=$(dtstree)
> +
> +ifdef CONFIG_OF_EARLY_FLATTREE
> +all: dtbs
> +endif
> +
> +endif
> +
> +PHONY += scripts_dtc
> +scripts_dtc: scripts_basic
> + $(Q)$(MAKE) $(build)=scripts/dtc
> +
> #
> ---------------------------------------------------------------------------
> # Modules
>
--
Best Regards
Masahiro Yamada
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH v3 6/9] kbuild: consolidate Devicetree dtb build rules
2018-10-01 5:49 ` Masahiro Yamada
@ 2018-10-01 13:25 ` Rob Herring
2018-10-01 14:48 ` Masahiro Yamada
0 siblings, 1 reply; 22+ messages in thread
From: Rob Herring @ 2018-10-01 13:25 UTC (permalink / raw)
To: Masahiro Yamada
Cc: Geert Uytterhoeven, devicetree, linux-kernel, Frank Rowand,
Michal Marek, Vineet Gupta, Russell King, Catalin Marinas,
Yoshinori Sato, Michal Simek, Ralf Baechle, James Hogan,
Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman,
Chris Zankel, Max Filippov, Linux Kbuild mailing list, arcml,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
moderated list:H8/300 ARCHITECTURE, Linux-MIPS, nios2-dev,
linuxppc-dev, linux-xtensa, Will Deacon, Paul Burton,
Ley Foon Tan
On Mon, Oct 1, 2018 at 12:49 AM Masahiro Yamada
<yamada.masahiro@socionext.com> wrote:
>
> Hi Rob,
>
>
> 2018年9月29日(土) 0:43 Rob Herring <robh@kernel.org>:
>
> > +#
> > ---------------------------------------------------------------------------
> > +# Devicetree files
> > +
> > +ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/boot/dts/),)
> > +dtstree := arch/$(SRCARCH)/boot/dts
> > +endif
> > +
> > +ifneq ($(dtstree),)
> > +
> > +%.dtb : scripts_dtc
>
> %.dtb: prepare3 prepare
I assume you didn't mean to drop scripts_dtc as that doesn't work.
Why "prepare" here and not on dtbs?
> because we need to make sure KERNELRELEASE
> is correctly defined before dtbs_install happens.
Yes, indeed. With prepare3 added I get:
cp: cannot create regular file
'/boot/dtbs/4.19.0-rc3-00009-g0afba9b7b2ea-dirty': No such file or
directory
vs. with it:
cp: cannot create regular file '/boot/dtbs/': Not a directory
>
>
> > + $(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@
> > +
> > +PHONY += dtbs dtbs_install
> > +dtbs: scripts_dtc
>
>
> dtbs: prepare3 scripts_dtc
>
>
>
> > + $(Q)$(MAKE) $(build)=$(dtstree)
> > +
> > +dtbs_install: dtbs
>
>
> Please do not have dtbs_install to depend on dtbs.
>
> No install targets should ever trigger building anything
> in the source tree.
>
>
> For the background, see the commit log of
> 19514fc665ffbce624785f76ee7ad0ea6378a527
Okay, thanks.
Rob
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH v3 6/9] kbuild: consolidate Devicetree dtb build rules
2018-10-01 13:25 ` Rob Herring
@ 2018-10-01 14:48 ` Masahiro Yamada
0 siblings, 0 replies; 22+ messages in thread
From: Masahiro Yamada @ 2018-10-01 14:48 UTC (permalink / raw)
To: Rob Herring
Cc: Geert Uytterhoeven, DTML, Linux Kernel Mailing List,
Frank Rowand, Michal Marek, Vineet Gupta, Russell King,
Catalin Marinas, Yoshinori Sato, Michal Simek, Ralf Baechle,
James Hogan, Benjamin Herrenschmidt, Paul Mackerras,
Michael Ellerman, Chris Zankel, Max Filippov,
Linux Kbuild mailing list, arcml, linux-arm-kernel,
moderated list:H8/300 ARCHITECTURE, Linux-MIPS, nios2-dev,
linuxppc-dev, linux-xtensa, Will Deacon, Paul Burton,
Ley Foon Tan
Hi Rob,
2018年10月1日(月) 22:26 Rob Herring <robh@kernel.org>:
>
> On Mon, Oct 1, 2018 at 12:49 AM Masahiro Yamada
> <yamada.masahiro@socionext.com> wrote:
> >
> > Hi Rob,
> >
> >
> > 2018年9月29日(土) 0:43 Rob Herring <robh@kernel.org>:
> >
> > > +#
> > > ---------------------------------------------------------------------------
> > > +# Devicetree files
> > > +
> > > +ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/boot/dts/),)
> > > +dtstree := arch/$(SRCARCH)/boot/dts
> > > +endif
> > > +
> > > +ifneq ($(dtstree),)
> > > +
> > > +%.dtb : scripts_dtc
> >
> > %.dtb: prepare3 prepare
>
> I assume you didn't mean to drop scripts_dtc as that doesn't work.
>
> Why "prepare" here and not on dtbs?
Sorry, my mistake.
%.dtb: prepare3 scripts_dtc
is the correct one.
> > because we need to make sure KERNELRELEASE
> > is correctly defined before dtbs_install happens.
>
> Yes, indeed. With prepare3 added I get:
>
> cp: cannot create regular file
> '/boot/dtbs/4.19.0-rc3-00009-g0afba9b7b2ea-dirty': No such file or
> directory
>
> vs. with it:
>
> cp: cannot create regular file '/boot/dtbs/': Not a directory
>
> >
> >
> > > + $(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@
> > > +
> > > +PHONY += dtbs dtbs_install
> > > +dtbs: scripts_dtc
> >
> >
> > dtbs: prepare3 scripts_dtc
> >
> >
> >
> > > + $(Q)$(MAKE) $(build)=$(dtstree)
> > > +
> > > +dtbs_install: dtbs
> >
> >
> > Please do not have dtbs_install to depend on dtbs.
> >
> > No install targets should ever trigger building anything
> > in the source tree.
> >
> >
> > For the background, see the commit log of
> > 19514fc665ffbce624785f76ee7ad0ea6378a527
>
> Okay, thanks.
>
> Rob
--
Best Regards
Masahiro Yamada
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH v3 6/9] kbuild: consolidate Devicetree dtb build rules
2018-09-13 15:51 ` Geert Uytterhoeven
2018-09-23 10:31 ` Masahiro Yamada
@ 2018-09-28 17:21 ` Andreas Färber
2018-09-28 18:41 ` Rob Herring
1 sibling, 1 reply; 22+ messages in thread
From: Andreas Färber @ 2018-09-28 17:21 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Masahiro Yamada, Rob Herring, devicetree,
Linux Kernel Mailing List, Frank Rowand, Michal Marek,
Vineet Gupta, Russell King, Catalin Marinas, Yoshinori Sato,
Michal Simek, Ralf Baechle, James Hogan, Benjamin Herrenschmidt,
Paul Mackerras, Michael Ellerman, Chris Zankel, Max Filippov,
linux-kbuild, arcml, Linux ARM, H8/300 ARCHITECTURE,
Linux MIPS Mailing List, nios2-dev, linuxppc-dev, linux-xtensa,
Will Deacon, Paul Burton, ley.foon.tan
Hi Geert,
Am 13.09.18 um 17:51 schrieb Geert Uytterhoeven:
> On Wed, Sep 12, 2018 at 3:02 AM Masahiro Yamada
> <yamada.masahiro@socionext.com> wrote:
>> Even x86 can enable OF and OF_UNITTEST.
>>
>> Another solution might be,
>> guard it by 'depends on ARCH_SUPPORTS_OF'.
>>
>> This is actually what ACPI does.
>>
>> menuconfig ACPI
>> bool "ACPI (Advanced Configuration and Power Interface) Support"
>> depends on ARCH_SUPPORTS_ACPI
>> ...
>
> ACPI is a real platform feature, as it depends on firmware.
>
> CONFIG_OF can be enabled, and DT overlays can be loaded, on any platform,
> even if it has ACPI ;-)
How would loading a DT overlay work on an ACPI platform? I.e., what
would it overlay against and how to practically load such a file?
I wonder whether that could be helpful for USB devices and serdev...
Cheers,
Andreas
--
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH v3 6/9] kbuild: consolidate Devicetree dtb build rules
2018-09-28 17:21 ` Andreas Färber
@ 2018-09-28 18:41 ` Rob Herring
2018-10-01 7:53 ` Geert Uytterhoeven
0 siblings, 1 reply; 22+ messages in thread
From: Rob Herring @ 2018-09-28 18:41 UTC (permalink / raw)
To: Andreas Färber
Cc: Geert Uytterhoeven, Masahiro Yamada, devicetree, linux-kernel,
Frank Rowand, Michal Marek, Vineet Gupta, Russell King,
Catalin Marinas, Yoshinori Sato, Michal Simek, Ralf Baechle,
James Hogan, Benjamin Herrenschmidt, Paul Mackerras,
Michael Ellerman, Chris Zankel, Max Filippov,
Linux Kbuild mailing list, arcml,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
moderated list:H8/300 ARCHITECTURE, Linux-MIPS, nios2-dev,
linuxppc-dev, linux-xtensa, Will Deacon, Paul Burton,
Ley Foon Tan
On Fri, Sep 28, 2018 at 12:21 PM Andreas Färber <afaerber@suse.de> wrote:
>
> Hi Geert,
>
> Am 13.09.18 um 17:51 schrieb Geert Uytterhoeven:
> > On Wed, Sep 12, 2018 at 3:02 AM Masahiro Yamada
> > <yamada.masahiro@socionext.com> wrote:
> >> Even x86 can enable OF and OF_UNITTEST.
> >>
> >> Another solution might be,
> >> guard it by 'depends on ARCH_SUPPORTS_OF'.
> >>
> >> This is actually what ACPI does.
> >>
> >> menuconfig ACPI
> >> bool "ACPI (Advanced Configuration and Power Interface) Support"
> >> depends on ARCH_SUPPORTS_ACPI
> >> ...
> >
> > ACPI is a real platform feature, as it depends on firmware.
> >
> > CONFIG_OF can be enabled, and DT overlays can be loaded, on any platform,
> > even if it has ACPI ;-)
>
> How would loading a DT overlay work on an ACPI platform? I.e., what
> would it overlay against and how to practically load such a file?
The DT unittests do just that. I run them on x86 and UM builds. In
this case, the loading source is built-in.
> I wonder whether that could be helpful for USB devices and serdev...
How to load the overlays is pretty orthogonal to the issues to be
solved here. It would certainly be possible to move forward with
prototyping this and just have the overlay built-in. It may not even
need to be an overlay if we can support multiple root nodes.
Rob
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH v3 6/9] kbuild: consolidate Devicetree dtb build rules
2018-09-28 18:41 ` Rob Herring
@ 2018-10-01 7:53 ` Geert Uytterhoeven
0 siblings, 0 replies; 22+ messages in thread
From: Geert Uytterhoeven @ 2018-10-01 7:53 UTC (permalink / raw)
To: Rob Herring
Cc: Andreas Färber, Masahiro Yamada,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
Linux Kernel Mailing List, Frank Rowand, Michal Marek,
Vineet Gupta, Russell King, Catalin Marinas, Yoshinori Sato,
Michal Simek, Ralf Baechle, James Hogan, Benjamin Herrenschmidt,
Paul Mackerras, Michael Ellerman, Chris Zankel, Max Filippov,
linux-kbuild, arcml, Linux ARM,
moderated list:H8/300 ARCHITECTURE, Linux MIPS Mailing List,
nios2-dev, linuxppc-dev, linux-xtensa, Will Deacon, Paul Burton,
ley.foon.tan
On Fri, Sep 28, 2018 at 8:42 PM Rob Herring <robh@kernel.org> wrote:
> On Fri, Sep 28, 2018 at 12:21 PM Andreas Färber <afaerber@suse.de> wrote:
> > Am 13.09.18 um 17:51 schrieb Geert Uytterhoeven:
> > > On Wed, Sep 12, 2018 at 3:02 AM Masahiro Yamada
> > > <yamada.masahiro@socionext.com> wrote:
> > >> Even x86 can enable OF and OF_UNITTEST.
> > >>
> > >> Another solution might be,
> > >> guard it by 'depends on ARCH_SUPPORTS_OF'.
> > >>
> > >> This is actually what ACPI does.
> > >>
> > >> menuconfig ACPI
> > >> bool "ACPI (Advanced Configuration and Power Interface) Support"
> > >> depends on ARCH_SUPPORTS_ACPI
> > >> ...
> > >
> > > ACPI is a real platform feature, as it depends on firmware.
> > >
> > > CONFIG_OF can be enabled, and DT overlays can be loaded, on any platform,
> > > even if it has ACPI ;-)
> >
> > How would loading a DT overlay work on an ACPI platform? I.e., what
> > would it overlay against and how to practically load such a file?
>
> The DT unittests do just that. I run them on x86 and UM builds. In
> this case, the loading source is built-in.
>
> > I wonder whether that could be helpful for USB devices and serdev...
>
> How to load the overlays is pretty orthogonal to the issues to be
> solved here. It would certainly be possible to move forward with
> prototyping this and just have the overlay built-in. It may not even
> need to be an overlay if we can support multiple root nodes.
You indeed need to refer to some anchors for most use cases, although a
simple MMIO device could just be anchored to the root node.
Topologies hanging off a USB device would be my first use case, too,
for serdev, or for e.g. the mcp2210 USB-SPI bridge.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH v3 7/9] powerpc: enable building all dtbs
2018-09-10 15:03 [PATCH v3 0/9] Devicetree build consolidation Rob Herring
` (5 preceding siblings ...)
2018-09-10 15:04 ` [PATCH v3 6/9] kbuild: consolidate Devicetree dtb build rules Rob Herring
@ 2018-09-10 15:04 ` Rob Herring
2018-09-10 15:04 ` [PATCH v3 8/9] c6x: " Rob Herring
2018-09-10 15:04 ` [PATCH v3 9/9] microblaze: " Rob Herring
8 siblings, 0 replies; 22+ messages in thread
From: Rob Herring @ 2018-09-10 15:04 UTC (permalink / raw)
To: devicetree, linux-kernel, Masahiro Yamada
Cc: Frank Rowand, Benjamin Herrenschmidt, Paul Mackerras,
Michael Ellerman, linuxppc-dev
Enable the 'dtbs' target for powerpc. This allows building all the dts
files in arch/powerpc/boot/dts/ when COMPILE_TEST and OF_ALL_DTBS are
enabled.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
arch/powerpc/boot/dts/Makefile | 5 +++++
arch/powerpc/boot/dts/fsl/Makefile | 4 ++++
2 files changed, 9 insertions(+)
create mode 100644 arch/powerpc/boot/dts/fsl/Makefile
diff --git a/arch/powerpc/boot/dts/Makefile b/arch/powerpc/boot/dts/Makefile
index f66554cd5c45..fb335d05aae8 100644
--- a/arch/powerpc/boot/dts/Makefile
+++ b/arch/powerpc/boot/dts/Makefile
@@ -1 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
+
+subdir-y += fsl
+
+dtstree := $(srctree)/$(src)
+dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts))
diff --git a/arch/powerpc/boot/dts/fsl/Makefile b/arch/powerpc/boot/dts/fsl/Makefile
new file mode 100644
index 000000000000..3bae982641e9
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+
+dtstree := $(srctree)/$(src)
+dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts))
--
2.17.1
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH v3 8/9] c6x: enable building all dtbs
2018-09-10 15:03 [PATCH v3 0/9] Devicetree build consolidation Rob Herring
` (6 preceding siblings ...)
2018-09-10 15:04 ` [PATCH v3 7/9] powerpc: enable building all dtbs Rob Herring
@ 2018-09-10 15:04 ` Rob Herring
2018-09-10 15:04 ` [PATCH v3 9/9] microblaze: " Rob Herring
8 siblings, 0 replies; 22+ messages in thread
From: Rob Herring @ 2018-09-10 15:04 UTC (permalink / raw)
To: devicetree, linux-kernel, Masahiro Yamada
Cc: Frank Rowand, Mark Salter, Aurelien Jacquiot, linux-c6x-dev
Enable the 'dtbs' target for c6x. This allows building all the dts
files in arch/c6x/boot/dts/ for enabled platforms or when
COMPILE_TEST and OF_ALL_DTBS are enabled.
Cc: Mark Salter <msalter@redhat.com>
Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com>
Cc: linux-c6x-dev@linux-c6x.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
arch/c6x/boot/dts/Makefile | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/c6x/boot/dts/Makefile b/arch/c6x/boot/dts/Makefile
index fd937f781d16..f438285c3640 100644
--- a/arch/c6x/boot/dts/Makefile
+++ b/arch/c6x/boot/dts/Makefile
@@ -5,6 +5,12 @@
DTC_FLAGS ?= -p 1024
+dtb-$(CONFIG_SOC_TMS320C6455) += dsk6455.dtb
+dtb-$(CONFIG_SOC_TMS320C6457) += evmc6457.dtb
+dtb-$(CONFIG_SOC_TMS320C6472) += evmc6472.dtb
+dtb-$(CONFIG_SOC_TMS320C6474) += evmc6474.dtb
+dtb-$(CONFIG_SOC_TMS320C6678) += evmc6678.dtb
+
ifneq ($(DTB),)
obj-y += $(DTB).dtb.o
endif
--
2.17.1
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH v3 9/9] microblaze: enable building all dtbs
2018-09-10 15:03 [PATCH v3 0/9] Devicetree build consolidation Rob Herring
` (7 preceding siblings ...)
2018-09-10 15:04 ` [PATCH v3 8/9] c6x: " Rob Herring
@ 2018-09-10 15:04 ` Rob Herring
8 siblings, 0 replies; 22+ messages in thread
From: Rob Herring @ 2018-09-10 15:04 UTC (permalink / raw)
To: devicetree, linux-kernel, Masahiro Yamada; +Cc: Frank Rowand, Michal Simek
Enable the 'dtbs' target for microblaze. As microblaze only has one dts
file, always enable it.
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Rob Herring <robh@kernel.org>
---
arch/microblaze/boot/dts/Makefile | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/microblaze/boot/dts/Makefile b/arch/microblaze/boot/dts/Makefile
index fe9af267f598..c7324e74f9ef 100644
--- a/arch/microblaze/boot/dts/Makefile
+++ b/arch/microblaze/boot/dts/Makefile
@@ -1,6 +1,8 @@
# SPDX-License-Identifier: GPL-2.0
#
+dtb-y := system.dtb
+
ifneq ($(DTB),)
obj-y += linked_dtb.o
--
2.17.1
^ permalink raw reply related [flat|nested] 22+ messages in thread