* [PATCH] drivers: soc: xilinx: fix firmware driver Kconfig dependency
@ 2020-04-08 15:52 Arnd Bergmann
2020-04-09 6:37 ` Michal Simek
0 siblings, 1 reply; 5+ messages in thread
From: Arnd Bergmann @ 2020-04-08 15:52 UTC (permalink / raw)
To: arm, Michal Simek, Rajan Vaja, Jolly Shah
Cc: Arnd Bergmann, Tejas Patel, linux-arm-kernel, linux-kernel
The firmware driver is optional, but the power driver depends on it,
which needs to be reflected in Kconfig to avoid link errors:
aarch64-linux-ld: drivers/soc/xilinx/zynqmp_power.o: in function `zynqmp_pm_isr':
zynqmp_power.c:(.text+0x284): undefined reference to `zynqmp_pm_invoke_fn'
The firmware driver can probably be allowed for compile-testing as
well, so it's best to drop the dependency on the ZYNQ platform
here and allow building as long as the firmware code is built-in.
Fixes: ab272643d723 ("drivers: soc: xilinx: Add ZynqMP PM driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/soc/xilinx/Kconfig | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/soc/xilinx/Kconfig b/drivers/soc/xilinx/Kconfig
index 223f1f9d0922..646512d7276f 100644
--- a/drivers/soc/xilinx/Kconfig
+++ b/drivers/soc/xilinx/Kconfig
@@ -19,7 +19,7 @@ config XILINX_VCU
config ZYNQMP_POWER
bool "Enable Xilinx Zynq MPSoC Power Management driver"
- depends on PM && ARCH_ZYNQMP
+ depends on PM && ZYNQMP_FIRMWARE
default y
select MAILBOX
select ZYNQMP_IPI_MBOX
@@ -35,7 +35,7 @@ config ZYNQMP_POWER
config ZYNQMP_PM_DOMAINS
bool "Enable Zynq MPSoC generic PM domains"
default y
- depends on PM && ARCH_ZYNQMP && ZYNQMP_FIRMWARE
+ depends on PM && ZYNQMP_FIRMWARE
select PM_GENERIC_DOMAINS
help
Say yes to enable device power management through PM domains
--
2.26.0
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH] drivers: soc: xilinx: fix firmware driver Kconfig dependency
2020-04-08 15:52 [PATCH] drivers: soc: xilinx: fix firmware driver Kconfig dependency Arnd Bergmann
@ 2020-04-09 6:37 ` Michal Simek
2020-04-09 9:09 ` Arnd Bergmann
0 siblings, 1 reply; 5+ messages in thread
From: Michal Simek @ 2020-04-09 6:37 UTC (permalink / raw)
To: Arnd Bergmann, arm, Michal Simek, Rajan Vaja, Jolly Shah
Cc: Tejas Patel, linux-arm-kernel, linux-kernel
On 08. 04. 20 17:52, Arnd Bergmann wrote:
> The firmware driver is optional, but the power driver depends on it,
> which needs to be reflected in Kconfig to avoid link errors:
>
> aarch64-linux-ld: drivers/soc/xilinx/zynqmp_power.o: in function `zynqmp_pm_isr':
> zynqmp_power.c:(.text+0x284): undefined reference to `zynqmp_pm_invoke_fn'
>
> The firmware driver can probably be allowed for compile-testing as
> well, so it's best to drop the dependency on the ZYNQ platform
> here and allow building as long as the firmware code is built-in.
>
> Fixes: ab272643d723 ("drivers: soc: xilinx: Add ZynqMP PM driver")
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> drivers/soc/xilinx/Kconfig | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/soc/xilinx/Kconfig b/drivers/soc/xilinx/Kconfig
> index 223f1f9d0922..646512d7276f 100644
> --- a/drivers/soc/xilinx/Kconfig
> +++ b/drivers/soc/xilinx/Kconfig
> @@ -19,7 +19,7 @@ config XILINX_VCU
>
> config ZYNQMP_POWER
> bool "Enable Xilinx Zynq MPSoC Power Management driver"
> - depends on PM && ARCH_ZYNQMP
> + depends on PM && ZYNQMP_FIRMWARE
> default y
> select MAILBOX
> select ZYNQMP_IPI_MBOX
> @@ -35,7 +35,7 @@ config ZYNQMP_POWER
> config ZYNQMP_PM_DOMAINS
> bool "Enable Zynq MPSoC generic PM domains"
> default y
> - depends on PM && ARCH_ZYNQMP && ZYNQMP_FIRMWARE
> + depends on PM && ZYNQMP_FIRMWARE
> select PM_GENERIC_DOMAINS
> help
> Say yes to enable device power management through PM domains
>
The same issue is likely with others drivers dependencies too which
depends on ARCH_ZYNQMP.
It means all drivers which includes "linux/firmware/xlnx-zynqmp.h" and
call zynqmp_pm_get_eemi_ops() should depend on ZYNQMP_FIRMWARE instead
of ARCH_ZYNQMP.
Thanks,
Michal
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] drivers: soc: xilinx: fix firmware driver Kconfig dependency
2020-04-09 6:37 ` Michal Simek
@ 2020-04-09 9:09 ` Arnd Bergmann
2020-04-09 10:43 ` Michal Simek
0 siblings, 1 reply; 5+ messages in thread
From: Arnd Bergmann @ 2020-04-09 9:09 UTC (permalink / raw)
To: Michal Simek
Cc: arm-soc, Rajan Vaja, Jolly Shah, Tejas Patel, Linux ARM, linux-kernel
On Thu, Apr 9, 2020 at 8:37 AM Michal Simek <michal.simek@xilinx.com> wrote:
>
> On 08. 04. 20 17:52, Arnd Bergmann wrote:
> > The firmware driver is optional, but the power driver depends on it,
> > which needs to be reflected in Kconfig to avoid link errors:
> >
> > aarch64-linux-ld: drivers/soc/xilinx/zynqmp_power.o: in function `zynqmp_pm_isr':
> > zynqmp_power.c:(.text+0x284): undefined reference to `zynqmp_pm_invoke_fn'
> >
> > The firmware driver can probably be allowed for compile-testing as
> > well, so it's best to drop the dependency on the ZYNQ platform
> > here and allow building as long as the firmware code is built-in.
> >
> > Fixes: ab272643d723 ("drivers: soc: xilinx: Add ZynqMP PM driver")
> > Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> > ---
> > drivers/soc/xilinx/Kconfig | 4 ++--
> > 1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/soc/xilinx/Kconfig b/drivers/soc/xilinx/Kconfig
> > index 223f1f9d0922..646512d7276f 100644
> > --- a/drivers/soc/xilinx/Kconfig
> > +++ b/drivers/soc/xilinx/Kconfig
> > @@ -19,7 +19,7 @@ config XILINX_VCU
> >
> > config ZYNQMP_POWER
> > bool "Enable Xilinx Zynq MPSoC Power Management driver"
> > - depends on PM && ARCH_ZYNQMP
> > + depends on PM && ZYNQMP_FIRMWARE
> > default y
> > select MAILBOX
> > select ZYNQMP_IPI_MBOX
> > @@ -35,7 +35,7 @@ config ZYNQMP_POWER
> > config ZYNQMP_PM_DOMAINS
> > bool "Enable Zynq MPSoC generic PM domains"
> > default y
> > - depends on PM && ARCH_ZYNQMP && ZYNQMP_FIRMWARE
> > + depends on PM && ZYNQMP_FIRMWARE
> > select PM_GENERIC_DOMAINS
> > help
> > Say yes to enable device power management through PM domains
> >
>
> The same issue is likely with others drivers dependencies too which
> depends on ARCH_ZYNQMP.
>
> It means all drivers which includes "linux/firmware/xlnx-zynqmp.h" and
> call zynqmp_pm_get_eemi_ops() should depend on ZYNQMP_FIRMWARE instead
> of ARCH_ZYNQMP.
The only one I see that has a hard dependency on ARCH_ZYNQMP
without allowing compile-testing at the moment is drivers/edac/synopsys_edac.c
but that doesn't use the firmware interface.
What I see in the header are declarations for exported functions:
int zynqmp_pm_invoke_fn(u32 pm_api_id, u32 arg0, u32 arg1,
u32 arg2, u32 arg3, u32 *ret_payload);
#if IS_REACHABLE(CONFIG_ZYNQMP_FIRMWARE)
const struct zynqmp_eemi_ops *zynqmp_pm_get_eemi_ops(void);
#else
static inline struct zynqmp_eemi_ops *zynqmp_pm_get_eemi_ops(void)
{
return ERR_PTR(-ENODEV);
}
#endif
The second one already allows compile-testing by turning into an
inline stub, but zynqmp_pm_invoke_fn() does not, and this is the
one causing the problem here.
I still think my patch is a good fix for that issue, but if you want to
handle both interfaces the same way, we can also do that, either
removing the stub and using a proper dependency, or using
the same stub trick for both.
Arnd
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] drivers: soc: xilinx: fix firmware driver Kconfig dependency
2020-04-09 9:09 ` Arnd Bergmann
@ 2020-04-09 10:43 ` Michal Simek
2020-04-15 6:16 ` Michal Simek
0 siblings, 1 reply; 5+ messages in thread
From: Michal Simek @ 2020-04-09 10:43 UTC (permalink / raw)
To: Arnd Bergmann, Michal Simek
Cc: arm-soc, Rajan Vaja, Jolly Shah, Tejas Patel, Linux ARM, linux-kernel
On 09. 04. 20 11:09, Arnd Bergmann wrote:
> On Thu, Apr 9, 2020 at 8:37 AM Michal Simek <michal.simek@xilinx.com> wrote:
>>
>> On 08. 04. 20 17:52, Arnd Bergmann wrote:
>>> The firmware driver is optional, but the power driver depends on it,
>>> which needs to be reflected in Kconfig to avoid link errors:
>>>
>>> aarch64-linux-ld: drivers/soc/xilinx/zynqmp_power.o: in function `zynqmp_pm_isr':
>>> zynqmp_power.c:(.text+0x284): undefined reference to `zynqmp_pm_invoke_fn'
>>>
>>> The firmware driver can probably be allowed for compile-testing as
>>> well, so it's best to drop the dependency on the ZYNQ platform
>>> here and allow building as long as the firmware code is built-in.
>>>
>>> Fixes: ab272643d723 ("drivers: soc: xilinx: Add ZynqMP PM driver")
>>> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
>>> ---
>>> drivers/soc/xilinx/Kconfig | 4 ++--
>>> 1 file changed, 2 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/drivers/soc/xilinx/Kconfig b/drivers/soc/xilinx/Kconfig
>>> index 223f1f9d0922..646512d7276f 100644
>>> --- a/drivers/soc/xilinx/Kconfig
>>> +++ b/drivers/soc/xilinx/Kconfig
>>> @@ -19,7 +19,7 @@ config XILINX_VCU
>>>
>>> config ZYNQMP_POWER
>>> bool "Enable Xilinx Zynq MPSoC Power Management driver"
>>> - depends on PM && ARCH_ZYNQMP
>>> + depends on PM && ZYNQMP_FIRMWARE
>>> default y
>>> select MAILBOX
>>> select ZYNQMP_IPI_MBOX
>>> @@ -35,7 +35,7 @@ config ZYNQMP_POWER
>>> config ZYNQMP_PM_DOMAINS
>>> bool "Enable Zynq MPSoC generic PM domains"
>>> default y
>>> - depends on PM && ARCH_ZYNQMP && ZYNQMP_FIRMWARE
>>> + depends on PM && ZYNQMP_FIRMWARE
>>> select PM_GENERIC_DOMAINS
>>> help
>>> Say yes to enable device power management through PM domains
>>>
>>
>> The same issue is likely with others drivers dependencies too which
>> depends on ARCH_ZYNQMP.
>>
>> It means all drivers which includes "linux/firmware/xlnx-zynqmp.h" and
>> call zynqmp_pm_get_eemi_ops() should depend on ZYNQMP_FIRMWARE instead
>> of ARCH_ZYNQMP.
>
> The only one I see that has a hard dependency on ARCH_ZYNQMP
> without allowing compile-testing at the moment is drivers/edac/synopsys_edac.c
> but that doesn't use the firmware interface.
>
> What I see in the header are declarations for exported functions:
>
> int zynqmp_pm_invoke_fn(u32 pm_api_id, u32 arg0, u32 arg1,
> u32 arg2, u32 arg3, u32 *ret_payload);
> #if IS_REACHABLE(CONFIG_ZYNQMP_FIRMWARE)
> const struct zynqmp_eemi_ops *zynqmp_pm_get_eemi_ops(void);
> #else
> static inline struct zynqmp_eemi_ops *zynqmp_pm_get_eemi_ops(void)
> {
> return ERR_PTR(-ENODEV);
> }
> #endif
>
> The second one already allows compile-testing by turning into an
> inline stub, but zynqmp_pm_invoke_fn() does not, and this is the
> one causing the problem here.
>
> I still think my patch is a good fix for that issue, but if you want to
> handle both interfaces the same way, we can also do that, either
> removing the stub and using a proper dependency, or using
> the same stub trick for both.
I have really not a problem with your fix above because the patch which
was applied has started to remove dependencies on ARCH_ZYNQMP. It
shouldn't be there because the same interface is used for new Xilinx
Versal device.
That header has been reworked by patches from here.
(last one) http://lkml.kernel.org/r/20200318115452.GA2491827@kroah.com
that's why changes has to go on the top of it.
Anyway feel free to take it directly or I will take it and send you pull
request. But will also look at other dependencies to make sure that they
are correct.
Acked-by: Michal Simek <michal.simek@xilinx.com>
Thanks,
Michal
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] drivers: soc: xilinx: fix firmware driver Kconfig dependency
2020-04-09 10:43 ` Michal Simek
@ 2020-04-15 6:16 ` Michal Simek
0 siblings, 0 replies; 5+ messages in thread
From: Michal Simek @ 2020-04-15 6:16 UTC (permalink / raw)
To: Michal Simek, Arnd Bergmann
Cc: arm-soc, Rajan Vaja, Jolly Shah, Tejas Patel, Linux ARM, linux-kernel
On 09. 04. 20 12:43, Michal Simek wrote:
> On 09. 04. 20 11:09, Arnd Bergmann wrote:
>> On Thu, Apr 9, 2020 at 8:37 AM Michal Simek <michal.simek@xilinx.com> wrote:
>>>
>>> On 08. 04. 20 17:52, Arnd Bergmann wrote:
>>>> The firmware driver is optional, but the power driver depends on it,
>>>> which needs to be reflected in Kconfig to avoid link errors:
>>>>
>>>> aarch64-linux-ld: drivers/soc/xilinx/zynqmp_power.o: in function `zynqmp_pm_isr':
>>>> zynqmp_power.c:(.text+0x284): undefined reference to `zynqmp_pm_invoke_fn'
>>>>
>>>> The firmware driver can probably be allowed for compile-testing as
>>>> well, so it's best to drop the dependency on the ZYNQ platform
>>>> here and allow building as long as the firmware code is built-in.
>>>>
>>>> Fixes: ab272643d723 ("drivers: soc: xilinx: Add ZynqMP PM driver")
>>>> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
>>>> ---
>>>> drivers/soc/xilinx/Kconfig | 4 ++--
>>>> 1 file changed, 2 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git a/drivers/soc/xilinx/Kconfig b/drivers/soc/xilinx/Kconfig
>>>> index 223f1f9d0922..646512d7276f 100644
>>>> --- a/drivers/soc/xilinx/Kconfig
>>>> +++ b/drivers/soc/xilinx/Kconfig
>>>> @@ -19,7 +19,7 @@ config XILINX_VCU
>>>>
>>>> config ZYNQMP_POWER
>>>> bool "Enable Xilinx Zynq MPSoC Power Management driver"
>>>> - depends on PM && ARCH_ZYNQMP
>>>> + depends on PM && ZYNQMP_FIRMWARE
>>>> default y
>>>> select MAILBOX
>>>> select ZYNQMP_IPI_MBOX
>>>> @@ -35,7 +35,7 @@ config ZYNQMP_POWER
>>>> config ZYNQMP_PM_DOMAINS
>>>> bool "Enable Zynq MPSoC generic PM domains"
>>>> default y
>>>> - depends on PM && ARCH_ZYNQMP && ZYNQMP_FIRMWARE
>>>> + depends on PM && ZYNQMP_FIRMWARE
>>>> select PM_GENERIC_DOMAINS
>>>> help
>>>> Say yes to enable device power management through PM domains
>>>>
>>>
>>> The same issue is likely with others drivers dependencies too which
>>> depends on ARCH_ZYNQMP.
>>>
>>> It means all drivers which includes "linux/firmware/xlnx-zynqmp.h" and
>>> call zynqmp_pm_get_eemi_ops() should depend on ZYNQMP_FIRMWARE instead
>>> of ARCH_ZYNQMP.
>>
>> The only one I see that has a hard dependency on ARCH_ZYNQMP
>> without allowing compile-testing at the moment is drivers/edac/synopsys_edac.c
>> but that doesn't use the firmware interface.
>>
>> What I see in the header are declarations for exported functions:
>>
>> int zynqmp_pm_invoke_fn(u32 pm_api_id, u32 arg0, u32 arg1,
>> u32 arg2, u32 arg3, u32 *ret_payload);
>> #if IS_REACHABLE(CONFIG_ZYNQMP_FIRMWARE)
>> const struct zynqmp_eemi_ops *zynqmp_pm_get_eemi_ops(void);
>> #else
>> static inline struct zynqmp_eemi_ops *zynqmp_pm_get_eemi_ops(void)
>> {
>> return ERR_PTR(-ENODEV);
>> }
>> #endif
>>
>> The second one already allows compile-testing by turning into an
>> inline stub, but zynqmp_pm_invoke_fn() does not, and this is the
>> one causing the problem here.
>>
>> I still think my patch is a good fix for that issue, but if you want to
>> handle both interfaces the same way, we can also do that, either
>> removing the stub and using a proper dependency, or using
>> the same stub trick for both.
>
> I have really not a problem with your fix above because the patch which
> was applied has started to remove dependencies on ARCH_ZYNQMP. It
> shouldn't be there because the same interface is used for new Xilinx
> Versal device.
>
> That header has been reworked by patches from here.
> (last one) http://lkml.kernel.org/r/20200318115452.GA2491827@kroah.com
> that's why changes has to go on the top of it.
>
> Anyway feel free to take it directly or I will take it and send you pull
> request. But will also look at other dependencies to make sure that they
> are correct.
>
> Acked-by: Michal Simek <michal.simek@xilinx.com>
Applied to zynqmp/soc.
Thanks,
Michal
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2020-04-15 6:17 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-04-08 15:52 [PATCH] drivers: soc: xilinx: fix firmware driver Kconfig dependency Arnd Bergmann
2020-04-09 6:37 ` Michal Simek
2020-04-09 9:09 ` Arnd Bergmann
2020-04-09 10:43 ` Michal Simek
2020-04-15 6:16 ` Michal Simek
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).