linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH 1/1] mfd: 88pm80x: Remove unnecessary exit APIs
@ 2012-12-07  8:38 Sachin Kamat
  2013-01-22  3:46 ` Sachin Kamat
  0 siblings, 1 reply; 2+ messages in thread
From: Sachin Kamat @ 2012-12-07  8:38 UTC (permalink / raw)
  To: linux-kernel; +Cc: sameo, sachin.kamat, patches, Qiao Zhou

This driver uses devm_* APIs.
Thus explicit exit calls (regmap_exit and devm_kfree) are not needed
as they are device managed APIs.

Cc: Qiao Zhou <zhouqiao@marvell.com>
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
---
 drivers/mfd/88pm80x.c |   19 +++----------------
 1 files changed, 3 insertions(+), 16 deletions(-)

diff --git a/drivers/mfd/88pm80x.c b/drivers/mfd/88pm80x.c
index 1adb355..3288a4a 100644
--- a/drivers/mfd/88pm80x.c
+++ b/drivers/mfd/88pm80x.c
@@ -48,14 +48,12 @@ int pm80x_init(struct i2c_client *client,
 		ret = PTR_ERR(map);
 		dev_err(&client->dev, "Failed to allocate register map: %d\n",
 			ret);
-		goto err_regmap_init;
+		return ret;
 	}
 
 	chip->id = id->driver_data;
-	if (chip->id < CHIP_PM800 || chip->id > CHIP_PM805) {
-		ret = -EINVAL;
-		goto err_chip_id;
-	}
+	if (chip->id < CHIP_PM800 || chip->id > CHIP_PM805)
+		return -EINVAL;
 
 	chip->client = client;
 	chip->regmap = map;
@@ -82,19 +80,11 @@ int pm80x_init(struct i2c_client *client,
 	}
 
 	return 0;
-
-err_chip_id:
-	regmap_exit(map);
-err_regmap_init:
-	devm_kfree(&client->dev, chip);
-	return ret;
 }
 EXPORT_SYMBOL_GPL(pm80x_init);
 
 int pm80x_deinit(struct i2c_client *client)
 {
-	struct pm80x_chip *chip = i2c_get_clientdata(client);
-
 	/*
 	 * workaround: clear the dependency between pm800 and pm805.
 	 * would remove it after HW chip fixes the issue.
@@ -104,9 +94,6 @@ int pm80x_deinit(struct i2c_client *client)
 	else
 		g_pm80x_chip = NULL;
 
-	regmap_exit(chip->regmap);
-	devm_kfree(&client->dev, chip);
-
 	return 0;
 }
 EXPORT_SYMBOL_GPL(pm80x_deinit);
-- 
1.7.4.1


^ permalink raw reply related	[flat|nested] 2+ messages in thread

* Re: [PATCH 1/1] mfd: 88pm80x: Remove unnecessary exit APIs
  2012-12-07  8:38 [PATCH 1/1] mfd: 88pm80x: Remove unnecessary exit APIs Sachin Kamat
@ 2013-01-22  3:46 ` Sachin Kamat
  0 siblings, 0 replies; 2+ messages in thread
From: Sachin Kamat @ 2013-01-22  3:46 UTC (permalink / raw)
  To: sameo; +Cc: sachin.kamat, linux-kernel, Qiao Zhou

Hi Samuel,

Could you please check this patch which is pending since some time.

On 7 December 2012 14:08, Sachin Kamat <sachin.kamat@linaro.org> wrote:
> This driver uses devm_* APIs.
> Thus explicit exit calls (regmap_exit and devm_kfree) are not needed
> as they are device managed APIs.
>
> Cc: Qiao Zhou <zhouqiao@marvell.com>
> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
> ---
>  drivers/mfd/88pm80x.c |   19 +++----------------
>  1 files changed, 3 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/mfd/88pm80x.c b/drivers/mfd/88pm80x.c
> index 1adb355..3288a4a 100644
> --- a/drivers/mfd/88pm80x.c
> +++ b/drivers/mfd/88pm80x.c
> @@ -48,14 +48,12 @@ int pm80x_init(struct i2c_client *client,
>                 ret = PTR_ERR(map);
>                 dev_err(&client->dev, "Failed to allocate register map: %d\n",
>                         ret);
> -               goto err_regmap_init;
> +               return ret;
>         }
>
>         chip->id = id->driver_data;
> -       if (chip->id < CHIP_PM800 || chip->id > CHIP_PM805) {
> -               ret = -EINVAL;
> -               goto err_chip_id;
> -       }
> +       if (chip->id < CHIP_PM800 || chip->id > CHIP_PM805)
> +               return -EINVAL;
>
>         chip->client = client;
>         chip->regmap = map;
> @@ -82,19 +80,11 @@ int pm80x_init(struct i2c_client *client,
>         }
>
>         return 0;
> -
> -err_chip_id:
> -       regmap_exit(map);
> -err_regmap_init:
> -       devm_kfree(&client->dev, chip);
> -       return ret;
>  }
>  EXPORT_SYMBOL_GPL(pm80x_init);
>
>  int pm80x_deinit(struct i2c_client *client)
>  {
> -       struct pm80x_chip *chip = i2c_get_clientdata(client);
> -
>         /*
>          * workaround: clear the dependency between pm800 and pm805.
>          * would remove it after HW chip fixes the issue.
> @@ -104,9 +94,6 @@ int pm80x_deinit(struct i2c_client *client)
>         else
>                 g_pm80x_chip = NULL;
>
> -       regmap_exit(chip->regmap);
> -       devm_kfree(&client->dev, chip);
> -
>         return 0;
>  }
>  EXPORT_SYMBOL_GPL(pm80x_deinit);
> --
> 1.7.4.1
>



-- 
With warm regards,
Sachin

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2013-01-22  3:46 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-12-07  8:38 [PATCH 1/1] mfd: 88pm80x: Remove unnecessary exit APIs Sachin Kamat
2013-01-22  3:46 ` Sachin Kamat

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).