linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Daniel Vetter <daniel@ffwll.ch>
To: Hans de Goede <hdegoede@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>,
	Steven Rostedt <rostedt@goodmis.org>,
	Petr Mladek <pmladek@suse.com>,
	Linux Fbdev development list <linux-fbdev@vger.kernel.org>,
	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	dri-devel <dri-devel@lists.freedesktop.org>,
	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Subject: Re: [PATCH v5 2/3] fbcon: Call WARN_CONSOLE_UNLOCKED() where applicable
Date: Wed, 11 Jul 2018 17:28:33 +0200	[thread overview]
Message-ID: <CAKMK7uG-xiCKkxhujL=J6n9ozYfW+fsioGHEmYRxpszVX=5PDg@mail.gmail.com> (raw)
In-Reply-To: <d528a539-255c-f019-eb6f-63f0585e0de3@redhat.com>

On Wed, Jul 11, 2018 at 5:14 PM, Hans de Goede <hdegoede@redhat.com> wrote:
> Hi,
>
> On 11-07-18 17:07, Thomas Zimmermann wrote:
>>
>> Hi
>>
>> Am 11.07.2018 um 16:52 schrieb Steven Rostedt:
>>>
>>>
>>> What if you make lockless_register_fb visible to fbcon, and then we can
>>> have a macro:
>>
>>
>> There are more of these macro invocations under drivers/tty/vt, which
>> also mess up the log during debugging.
>
>
> Hmm, so this option is already broken (in a way) then, my first reaction
> to your mail was that we should just remove that option. But that seemed
> a bit harsh to me so I've been working on a fix for the last 10 minutes
> or so.
>
> But if it is already broken I'm tempted to just remove the option and
> be done with it.  We really need less cruft in the fbdev/fbcon code not
> more.

Please don't remove it, it makes debugging kms driver issues on
initial modeset (which is usually run from framebuffer_register, while
hodling the console_lock) impossible.
-Daniel

>> WARN_CONSOLE_UNLOCKED is already protected by an '#ifdef 1 ... #else
>> ...' construct [1]. I thought about turning this into a config option.
>
>
> Ah I noticed the #if but I did not notice that it was a "#if 1".
>
> If you want to fix lockless_register_fb it really should be replaced
> with a runtime check, not a Kconfig option. This would require having
> some lockless variable in the console code itself, which then gets
> set by the fbdev code during init based on its lockless_register_fb
> setting.
>
> But as said I think we should seriously consider just removing
> lockless_register_fb.
>
> Regards,
>
> Hans
>
>
>
>
>
>
>
>>
>> Best regards
>> Thomas
>>
>> [1]
>>
>> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/include/linux/console.h#n203
>>
>>>
>>> #define WARN_FB_CONSOLE_UNLOCKED()                      \
>>>         do {                                            \
>>>                 if (unlikely(!lockless_register_fb))    \
>>>                         WARN_CONSOLE_UNLOCKED();        \
>>>         } while (0)
>>>
>>> And use that instead?
>>>
>>> -- Steve
>>>
>>>
>>>> Best regards
>>>> Thomas
>>>>
>>>>> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
>>>>> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
>>>>> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
>>>>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>>>>> ---
>>>>> Changes in v3:
>>>>> -New patch in v3 of this patchset
>>>>>
>>>>> Changes in v4:
>>>>> -Keep the comments about which fbcon functions need locks in place
>>>>> ---
>>>>>   drivers/video/fbdev/core/fbcon.c | 11 +++++++++++
>>>>>   1 file changed, 11 insertions(+)
>>>>>
>>>>> diff --git a/drivers/video/fbdev/core/fbcon.c
>>>>> b/drivers/video/fbdev/core/fbcon.c
>>>>> index c910e74d46ff..cd8d52a967aa 100644
>>>>> --- a/drivers/video/fbdev/core/fbcon.c
>>>>> +++ b/drivers/video/fbdev/core/fbcon.c
>>>>> @@ -828,6 +828,8 @@ static int set_con2fb_map(int unit, int newidx, int
>>>>> user)
>>>>>         struct fb_info *oldinfo = NULL;
>>>>>         int found, err = 0;
>>>>>   +     WARN_CONSOLE_UNLOCKED();
>>>>> +
>>>>>         if (oldidx == newidx)
>>>>>                 return 0;
>>>>>   @@ -3044,6 +3046,8 @@ static int fbcon_fb_unbind(int idx)
>>>>>   {
>>>>>         int i, new_idx = -1, ret = 0;
>>>>>   +     WARN_CONSOLE_UNLOCKED();
>>>>> +
>>>>>         if (!fbcon_has_console_bind)
>>>>>                 return 0;
>>>>>   @@ -3094,6 +3098,8 @@ static int fbcon_fb_unregistered(struct fb_info
>>>>> *info)
>>>>>   {
>>>>>         int i, idx;
>>>>>   +     WARN_CONSOLE_UNLOCKED();
>>>>> +
>>>>>         idx = info->node;
>>>>>         for (i = first_fb_vc; i <= last_fb_vc; i++) {
>>>>>                 if (con2fb_map[i] == idx)
>>>>> @@ -3131,6 +3137,9 @@ static int fbcon_fb_unregistered(struct fb_info
>>>>> *info)
>>>>>   static void fbcon_remap_all(int idx)
>>>>>   {
>>>>>         int i;
>>>>> +
>>>>> +       WARN_CONSOLE_UNLOCKED();
>>>>> +
>>>>>         for (i = first_fb_vc; i <= last_fb_vc; i++)
>>>>>                 set_con2fb_map(i, idx, 0);
>>>>>   @@ -3177,6 +3186,8 @@ static int fbcon_fb_registered(struct fb_info
>>>>> *info)
>>>>>   {
>>>>>         int ret = 0, i, idx;
>>>>>   +     WARN_CONSOLE_UNLOCKED();
>>>>> +
>>>>>         idx = info->node;
>>>>>         fbcon_select_primary(info);
>>>>>
>>>>
>>>>
>>>
>>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel



-- 
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch

  reply	other threads:[~2018-07-11 15:28 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20180628090357epcas5p28361ab4b3ce11c179a167548f4851983@epcas5p2.samsung.com>
2018-06-28  9:03 ` [PATCH v5 0/3] console/fbcon: Add support for deferred console takeover Hans de Goede
2018-06-28  9:03   ` [PATCH v5 1/3] printk: Export is_console_locked Hans de Goede
2018-06-28  9:03   ` [PATCH v5 2/3] fbcon: Call WARN_CONSOLE_UNLOCKED() where applicable Hans de Goede
2018-07-11 14:46     ` Thomas Zimmermann
2018-07-11 14:52       ` Steven Rostedt
2018-07-11 15:01         ` Hans de Goede
2018-07-11 15:07           ` Daniel Vetter
2018-07-11 15:07         ` Thomas Zimmermann
2018-07-11 15:14           ` Hans de Goede
2018-07-11 15:28             ` Daniel Vetter [this message]
2018-07-11 15:35               ` Hans de Goede
2018-07-11 15:41                 ` Steven Rostedt
2018-07-11 15:42                 ` Daniel Vetter
2018-07-11 17:35                   ` Hans de Goede
2018-07-11 17:56                     ` Daniel Vetter
2018-07-11 19:19                       ` Steven Rostedt
2018-07-11 19:41                         ` Hans de Goede
2018-07-12 10:16                         ` Thomas Zimmermann
2018-07-11 23:59       ` Sergey Senozhatsky
2018-06-28  9:03   ` [PATCH v5 3/3] console/fbcon: Add support for deferred console takeover Hans de Goede
2018-07-03 16:13     ` Sergey Senozhatsky
2018-07-03 16:14       ` Steven Rostedt
2018-07-03 16:36         ` Sergey Senozhatsky
2018-06-28 13:50   ` [PATCH v5 0/3] " Bartlomiej Zolnierkiewicz
2018-06-28 15:24     ` Hans de Goede
2018-06-28 22:44     ` Gustavo Padovan
2018-06-29 10:08       ` Bartlomiej Zolnierkiewicz
2018-06-29 12:51         ` Gustavo Padovan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAKMK7uG-xiCKkxhujL=J6n9ozYfW+fsioGHEmYRxpszVX=5PDg@mail.gmail.com' \
    --to=daniel@ffwll.ch \
    --cc=b.zolnierkie@samsung.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=hdegoede@redhat.com \
    --cc=linux-fbdev@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pmladek@suse.com \
    --cc=rostedt@goodmis.org \
    --cc=sergey.senozhatsky@gmail.com \
    --cc=tzimmermann@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).