* [V13-prerc]: REGRESSION: "*ERROR* Timed out waiting for forcewake old ack to clear"
@ 2013-11-16 11:28 Jörg Otte
2013-11-16 11:59 ` Daniel Vetter
0 siblings, 1 reply; 4+ messages in thread
From: Jörg Otte @ 2013-11-16 11:28 UTC (permalink / raw)
To: Linux Kernel Mailing List, Chris Wilson, Daniel Vetter,
Mika Kuoppala, Ben Widawsky, Linus Torvalds
On startup I get the following error display on the console:
"*ERROR* Timed out waiting for forcewake old ack to clear"
I already reported this error a year ago at the time of v3.7
( see https://lkml.org/lkml/2012/11/27/355)
which was fixed later on.
Now this error is back again. Kernel 3.12.0-09888-gf63c48
Jörg
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [V13-prerc]: REGRESSION: "*ERROR* Timed out waiting for forcewake old ack to clear"
2013-11-16 11:28 [V13-prerc]: REGRESSION: "*ERROR* Timed out waiting for forcewake old ack to clear" Jörg Otte
@ 2013-11-16 11:59 ` Daniel Vetter
2013-11-16 14:39 ` Jörg Otte
0 siblings, 1 reply; 4+ messages in thread
From: Daniel Vetter @ 2013-11-16 11:59 UTC (permalink / raw)
To: Jörg Otte
Cc: Linux Kernel Mailing List, Chris Wilson, Mika Kuoppala,
Ben Widawsky, Linus Torvalds, intel-gfx
On Sat, Nov 16, 2013 at 12:28 PM, Jörg Otte <jrg.otte@gmail.com> wrote:
> On startup I get the following error display on the console:
> "*ERROR* Timed out waiting for forcewake old ack to clear"
>
> I already reported this error a year ago at the time of v3.7
> ( see https://lkml.org/lkml/2012/11/27/355)
> which was fixed later on.
>
> Now this error is back again. Kernel 3.12.0-09888-gf63c48
Please boot with drm.debug=0xe, reproduce the issue and then attach
the complete dmesg (including all the boot message, so if it takes a
while to reproduce please grab an boot dmesg, too).
Also adding the right mailing lists, see MAINTAINERS.
Thanks, Daniel
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [V13-prerc]: REGRESSION: "*ERROR* Timed out waiting for forcewake old ack to clear"
2013-11-16 11:59 ` Daniel Vetter
@ 2013-11-16 14:39 ` Jörg Otte
2013-11-16 14:58 ` Daniel Vetter
0 siblings, 1 reply; 4+ messages in thread
From: Jörg Otte @ 2013-11-16 14:39 UTC (permalink / raw)
To: Daniel Vetter, intel-gfx, dri-devel
Cc: Linux Kernel Mailing List, Chris Wilson, Mika Kuoppala,
Ben Widawsky, Linus Torvalds
[-- Attachment #1: Type: text/plain, Size: 879 bytes --]
2013/11/16 Daniel Vetter <daniel.vetter@ffwll.ch>:
> On Sat, Nov 16, 2013 at 12:28 PM, Jörg Otte <jrg.otte@gmail.com> wrote:
>> On startup I get the following error display on the console:
>> "*ERROR* Timed out waiting for forcewake old ack to clear"
>>
>> I already reported this error a year ago at the time of v3.7
>> ( see https://lkml.org/lkml/2012/11/27/355)
>> which was fixed later on.
>>
>> Now this error is back again. Kernel 3.12.0-09888-gf63c48
>
> Please boot with drm.debug=0xe, reproduce the issue and then attach
> the complete dmesg (including all the boot message, so if it takes a
> while to reproduce please grab an boot dmesg, too).
>
> Also adding the right mailing lists, see MAINTAINERS.
>
> Thanks, Daniel
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> +41 (0) 79 365 57 48 - http://blog.ffwll.ch
Thanks, Jörg
[-- Attachment #2: dmesg.drm --]
[-- Type: application/octet-stream, Size: 165898 bytes --]
[ 0.000000] Linux version 3.12.0-09888-gf63c482 (jojo@ahorn) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #54 SMP Sat Nov 16 10:56:59 CET 2013
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.12.0-09888-gf63c482 root=UUID=5dc271e8-8019-4d38-9dd9-3117527a7d68 ro possible_cpus=4 resume=/dev/sda3 drm.debug=0xe quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000c7d18fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c7d19000-0x00000000c7f1afff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c7f1b000-0x00000000d82b2fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d82b3000-0x00000000daeeefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000daeef000-0x00000000daf9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by Phoenix Technologies Ltd.
[ 0.000000] efi: ACPI=0xdaffe000 ACPI 2.0=0xdaffe014 SMBIOS=0xdae8b000
[ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
[ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x000000000005b000) (0MB)
[ 0.000000] efi: mem02: type=4, attr=0xf, range=[0x000000000005b000-0x000000000005c000) (0MB)
[ 0.000000] efi: mem03: type=3, attr=0xf, range=[0x000000000005c000-0x0000000000087000) (0MB)
[ 0.000000] efi: mem04: type=4, attr=0xf, range=[0x0000000000087000-0x0000000000088000) (0MB)
[ 0.000000] efi: mem05: type=3, attr=0xf, range=[0x0000000000088000-0x0000000000090000) (0MB)
[ 0.000000] efi: mem06: type=0, attr=0xf, range=[0x0000000000090000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem07: type=3, attr=0xf, range=[0x0000000000100000-0x0000000000110000) (0MB)
[ 0.000000] efi: mem08: type=2, attr=0xf, range=[0x0000000000110000-0x0000000000534000) (4MB)
[ 0.000000] efi: mem09: type=7, attr=0xf, range=[0x0000000000534000-0x0000000020000000) (506MB)
[ 0.000000] efi: mem10: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
[ 0.000000] efi: mem11: type=7, attr=0xf, range=[0x0000000020200000-0x0000000037184000) (367MB)
[ 0.000000] efi: mem12: type=2, attr=0xf, range=[0x0000000037184000-0x0000000037186000) (0MB)
[ 0.000000] efi: mem13: type=7, attr=0xf, range=[0x0000000037186000-0x0000000037188000) (0MB)
[ 0.000000] efi: mem14: type=2, attr=0xf, range=[0x0000000037188000-0x00000000378bc000) (7MB)
[ 0.000000] efi: mem15: type=7, attr=0xf, range=[0x00000000378bc000-0x0000000040004000) (135MB)
[ 0.000000] efi: mem16: type=0, attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
[ 0.000000] efi: mem17: type=7, attr=0xf, range=[0x0000000040005000-0x00000000926a5000) (1318MB)
[ 0.000000] efi: mem18: type=2, attr=0xf, range=[0x00000000926a5000-0x00000000c56ea000) (816MB)
[ 0.000000] efi: mem19: type=4, attr=0xf, range=[0x00000000c56ea000-0x00000000c570a000) (0MB)
[ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x00000000c570a000-0x00000000c7d03000) (37MB)
[ 0.000000] efi: mem21: type=4, attr=0xf, range=[0x00000000c7d03000-0x00000000c7d19000) (0MB)
[ 0.000000] efi: mem22: type=0, attr=0xf, range=[0x00000000c7d19000-0x00000000c7f1b000) (2MB)
[ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x00000000c7f1b000-0x00000000c86da000) (7MB)
[ 0.000000] efi: mem24: type=7, attr=0xf, range=[0x00000000c86da000-0x00000000c882f000) (1MB)
[ 0.000000] efi: mem25: type=1, attr=0xf, range=[0x00000000c882f000-0x00000000c884e000) (0MB)
[ 0.000000] efi: mem26: type=7, attr=0xf, range=[0x00000000c884e000-0x00000000ca305000) (26MB)
[ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x00000000ca305000-0x00000000cb879000) (21MB)
[ 0.000000] efi: mem28: type=7, attr=0xf, range=[0x00000000cb879000-0x00000000cb87b000) (0MB)
[ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x00000000cb87b000-0x00000000cbbc8000) (3MB)
[ 0.000000] efi: mem30: type=7, attr=0xf, range=[0x00000000cbbc8000-0x00000000cbc60000) (0MB)
[ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x00000000cbc60000-0x00000000cc048000) (3MB)
[ 0.000000] efi: mem32: type=7, attr=0xf, range=[0x00000000cc048000-0x00000000cc05a000) (0MB)
[ 0.000000] efi: mem33: type=4, attr=0xf, range=[0x00000000cc05a000-0x00000000cd2b3000) (18MB)
[ 0.000000] efi: mem34: type=7, attr=0xf, range=[0x00000000cd2b3000-0x00000000cfd3f000) (42MB)
[ 0.000000] efi: mem35: type=2, attr=0xf, range=[0x00000000cfd3f000-0x00000000cfd43000) (0MB)
[ 0.000000] efi: mem36: type=3, attr=0xf, range=[0x00000000cfd43000-0x00000000d82b3000) (133MB)
[ 0.000000] efi: mem37: type=5, attr=0x800000000000000f, range=[0x00000000d82b3000-0x00000000d83d2000) (1MB)
[ 0.000000] efi: mem38: type=5, attr=0x800000000000000f, range=[0x00000000d83d2000-0x00000000d84b3000) (0MB)
[ 0.000000] efi: mem39: type=6, attr=0x800000000000000f, range=[0x00000000d84b3000-0x00000000d8b88000) (6MB)
[ 0.000000] efi: mem40: type=6, attr=0x800000000000000f, range=[0x00000000d8b88000-0x00000000da6dd000) (27MB)
[ 0.000000] efi: mem41: type=0, attr=0xf, range=[0x00000000da6dd000-0x00000000dae8b000) (7MB)
[ 0.000000] efi: mem42: type=0, attr=0xf, range=[0x00000000dae8b000-0x00000000daeef000) (0MB)
[ 0.000000] efi: mem43: type=10, attr=0xf, range=[0x00000000daeef000-0x00000000daf21000) (0MB)
[ 0.000000] efi: mem44: type=10, attr=0xf, range=[0x00000000daf21000-0x00000000daf9f000) (0MB)
[ 0.000000] efi: mem45: type=9, attr=0xf, range=[0x00000000daf9f000-0x00000000dafe3000) (0MB)
[ 0.000000] efi: mem46: type=9, attr=0xf, range=[0x00000000dafe3000-0x00000000dafff000) (0MB)
[ 0.000000] efi: mem47: type=4, attr=0xf, range=[0x00000000dafff000-0x00000000db000000) (0MB)
[ 0.000000] efi: mem48: type=7, attr=0xf, range=[0x0000000100000000-0x000000021f600000) (4598MB)
[ 0.000000] efi: mem49: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
[ 0.000000] efi: mem50: type=0, attr=0x0, range=[0x00000000db000000-0x00000000dfa00000) (74MB)
[ 0.000000] efi: mem51: type=11, attr=0x8000000000000001, range=[0x00000000f80f8000-0x00000000f80f9000) (0MB)
[ 0.000000] efi: mem52: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: FUJITSU LIFEBOOK AH532/FJNBB1C, BIOS Version 1.09 05/22/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x21f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FE0000000 write-back
[ 0.000000] 4 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 5 base 0DB000000 mask FFF000000 uncachable
[ 0.000000] 6 base 100000000 mask F00000000 write-back
[ 0.000000] 7 base 200000000 mask FE0000000 write-back
[ 0.000000] 8 base 21F800000 mask FFF800000 uncachable
[ 0.000000] 9 base 21F600000 mask FFFE00000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000055000] 55000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01bd3000, 0x01bd3fff] PGTABLE
[ 0.000000] BRK [0x01bd4000, 0x01bd4fff] PGTABLE
[ 0.000000] BRK [0x01bd5000, 0x01bd5fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21f400000-0x21f5fffff]
[ 0.000000] [mem 0x21f400000-0x21f5fffff] page 2M
[ 0.000000] BRK [0x01bd6000, 0x01bd6fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21c000000-0x21f3fffff]
[ 0.000000] [mem 0x21c000000-0x21f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
[ 0.000000] [mem 0x200000000-0x21bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x40003fff] page 4k
[ 0.000000] BRK [0x01bd7000, 0x01bd7fff] PGTABLE
[ 0.000000] BRK [0x01bd8000, 0x01bd8fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x40005000-0xc7d18fff]
[ 0.000000] [mem 0x40005000-0x401fffff] page 4k
[ 0.000000] [mem 0x40200000-0xc7bfffff] page 2M
[ 0.000000] [mem 0xc7c00000-0xc7d18fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xc7f1b000-0xd82b2fff]
[ 0.000000] [mem 0xc7f1b000-0xc7ffffff] page 4k
[ 0.000000] [mem 0xc8000000-0xd81fffff] page 2M
[ 0.000000] [mem 0xd8200000-0xd82b2fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xdafff000-0xdaffffff]
[ 0.000000] [mem 0xdafff000-0xdaffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x37188000-0x378bbfff]
[ 0.000000] ACPI: RSDP 00000000daffe014 000024 (v02 FUJ )
[ 0.000000] ACPI: XSDT 00000000daffe170 00009C (v01 FUJ PC 00000001 FUJ 00000001)
[ 0.000000] ACPI: FACP 00000000dafed000 0000F4 (v03 FUJ PC 00000001 FUJ 00000001)
[ 0.000000] ACPI: DSDT 00000000daff0000 00994D (v02 FUJ FJNBB1C 01090000 INTL 20061109)
[ 0.000000] ACPI: FACS 00000000daf7c000 000040
[ 0.000000] ACPI: SSDT 00000000daffc000 0000A9 (v01 FUJ SataAhci 00000001 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000daffa000 001068 (v01 FUJ PtidDevc 01090000 INTL 20061109)
[ 0.000000] ACPI: ASF! 00000000dafef000 0000A5 (v32 FUJ PC 00000001 FUJ 00000001)
[ 0.000000] ACPI: HPET 00000000dafec000 000038 (v01 FUJ PC 00000001 FUJ 00000001)
[ 0.000000] ACPI: APIC 00000000dafeb000 000098 (v01 FUJ PC 00000001 FUJ 00000001)
[ 0.000000] ACPI: MCFG 00000000dafea000 00003C (v01 FUJ PC 00000001 FUJ 00000001)
[ 0.000000] ACPI: FPDT 00000000dafe9000 000054 (v01 FUJ PC 00000001 FUJ 00000001)
[ 0.000000] ACPI: SSDT 00000000dafe8000 000968 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000dafe7000 000A92 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: UEFI 00000000dafe6000 00003E (v01 FUJ PC 00000001 FUJ 00000001)
[ 0.000000] ACPI: UEFI 00000000dafe5000 000042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: POAT 00000000dafe4000 000055 (v03 FUJ PC 00000001 FUJ 00000001)
[ 0.000000] ACPI: SLIC 00000000daffd000 000176 (v01 FUJ PC 01090000 FUJ 00000001)
[ 0.000000] ACPI: UEFI 00000000dafe3000 000292 (v01 FUJ PC 00000001 FUJ 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880216c00000-ffff88021ebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x21f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0008ffff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x40003fff]
[ 0.000000] node 0: [mem 0x40005000-0xc7d18fff]
[ 0.000000] node 0: [mem 0xc7f1b000-0xd82b2fff]
[ 0.000000] node 0: [mem 0xdafff000-0xdaffffff]
[ 0.000000] node 0: [mem 0x100000000-0x21f5fffff]
[ 0.000000] On node 0 totalpages: 2061376
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 90 pages reserved
[ 0.000000] DMA zone: 3983 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13755 pages used for memmap
[ 0.000000] DMA32 zone: 880305 pages, LIFO batch:31
[ 0.000000] Normal zone: 18392 pages used for memmap
[ 0.000000] Normal zone: 1177088 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] e820: [mem 0xdfa00000-0xf80f7fff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 24 pages/cpu @ffff88021f200000 s73816 r0 d24488 u524288
[ 0.000000] pcpu-alloc: s73816 r0 d24488 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2029075
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.12.0-09888-gf63c482 root=UUID=5dc271e8-8019-4d38-9dd9-3117527a7d68 ro possible_cpus=4 resume=/dev/sda3 drm.debug=0xe quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Memory: 7822712K/8245504K available (6164K kernel code, 422K rwdata, 1780K rodata, 776K init, 636K bss, 422792K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 4
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-3.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 2494.316 MHz processor
[ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.63 BogoMIPS (lpj=9977264)
[ 0.000003] pid_max: default: 32768 minimum: 301
[ 0.000011] init_memory_mapping: [mem 0xd82b3000-0xd84b2fff]
[ 0.000013] [mem 0xd82b3000-0xd84b2fff] page 4k
[ 0.000021] init_memory_mapping: [mem 0xd84b3000-0xda6dcfff]
[ 0.000022] [mem 0xd84b3000-0xd85fffff] page 4k
[ 0.000023] [mem 0xd8600000-0xda5fffff] page 2M
[ 0.000024] [mem 0xda600000-0xda6dcfff] page 4k
[ 0.014759] Security Framework initialized
[ 0.014767] AppArmor: AppArmor initialized
[ 0.014774] Mount-cache hash table entries: 256
[ 0.014886] CPU: Physical Processor ID: 0
[ 0.014888] CPU: Processor Core ID: 0
[ 0.014891] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.014891] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.015246] mce: CPU supports 7 MCE banks
[ 0.015256] CPU0: Thermal monitoring enabled (TM1)
[ 0.015263] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[ 0.015263] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.015263] tlb_flushall_shift: 1
[ 0.015375] Freeing SMP alternatives memory: 24K (ffffffff81b2d000 - ffffffff81b33000)
[ 0.015377] ACPI: Core revision 20130927
[ 0.019522] ACPI: All ACPI Tables successfully acquired
[ 0.024803] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.064532] smpboot: CPU0: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz (fam: 06, model: 3a, stepping: 09)
[ 0.064539] TSC deadline timer enabled
[ 0.064547] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.064553] ... version: 3
[ 0.064554] ... bit width: 48
[ 0.064554] ... generic registers: 4
[ 0.064555] ... value mask: 0000ffffffffffff
[ 0.064556] ... max period: 0000ffffffffffff
[ 0.064557] ... fixed-purpose events: 3
[ 0.064558] ... event mask: 000000070000000f
[ 0.064718] x86: Booting SMP configuration:
[ 0.064720] .... node #0, CPUs: #1 #2 #3
[ 0.105194] x86: Booted up 1 node, 4 CPUs
[ 0.105198] smpboot: Total of 4 processors activated (19954.52 BogoMIPS)
[ 0.107898] devtmpfs: initialized
[ 0.108043] PM: Registering ACPI NVS region [mem 0xdaeef000-0xdaf9efff] (720896 bytes)
[ 0.108110] NET: Registered protocol family 16
[ 0.108177] cpuidle: using governor ladder
[ 0.108178] cpuidle: using governor menu
[ 0.108211] ACPI: bus type PCI registered
[ 0.108215] PCI: Using configuration type 1 for base access
[ 0.109161] bio: create slab <bio-0> at 0
[ 0.109235] ACPI: Added _OSI(Module Device)
[ 0.109236] ACPI: Added _OSI(Processor Device)
[ 0.109237] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.109238] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.111340] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.128144] ACPI: SSDT 00000000dae8d018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.128417] ACPI: Dynamic OEM Table Load:
[ 0.128419] ACPI: SSDT (null) 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.131961] ACPI: SSDT 00000000dae8ea98 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.132251] ACPI: Dynamic OEM Table Load:
[ 0.132253] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.135864] ACPI: SSDT 00000000daeedc18 000119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.136129] ACPI: Dynamic OEM Table Load:
[ 0.136130] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.140320] ACPI: Interpreter enabled
[ 0.140326] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130927/hwxface-580)
[ 0.140330] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130927/hwxface-580)
[ 0.140339] ACPI: (supports S0 S3 S5)
[ 0.140340] ACPI: Using IOAPIC for interrupt routing
[ 0.140359] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.151532] ACPI: Power Resource [QFAN] (off)
[ 0.152044] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.152049] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.152157] \_SB_.PCI0:_OSC invalid UUID
[ 0.152158] _OSC request data:1 1e 0
[ 0.152161] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.152580] PCI host bridge to bus 0000:00
[ 0.152583] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.152584] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.152586] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.152587] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.152589] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[ 0.152596] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.152663] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.152673] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.152679] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.152684] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.152768] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.152790] pci 0000:00:14.0: reg 0x10: [mem 0xf1600000-0xf160ffff 64bit]
[ 0.152863] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.152898] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.152927] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.152950] pci 0000:00:16.0: reg 0x10: [mem 0xf1615000-0xf161500f 64bit]
[ 0.153026] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.153094] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.153115] pci 0000:00:1a.0: reg 0x10: [mem 0xf161a000-0xf161a3ff]
[ 0.153206] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.153254] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.153286] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.153300] pci 0000:00:1b.0: reg 0x10: [mem 0xf1610000-0xf1613fff 64bit]
[ 0.153369] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.153427] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.153513] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.153575] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.153653] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.153714] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
[ 0.153793] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.153853] pci 0000:00:1c.5: [8086:1e1a] type 01 class 0x060400
[ 0.153932] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.153998] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.154019] pci 0000:00:1d.0: reg 0x10: [mem 0xf1619000-0xf16193ff]
[ 0.154110] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.154156] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.154183] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[ 0.154342] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.154361] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
[ 0.154369] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
[ 0.154377] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
[ 0.154385] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
[ 0.154393] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
[ 0.154402] pci 0000:00:1f.2: reg 0x24: [mem 0xf1618000-0xf16187ff]
[ 0.154447] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.154501] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.154516] pci 0000:00:1f.3: reg 0x10: [mem 0xf1614000-0xf16140ff 64bit]
[ 0.154538] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.154647] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.154725] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.154744] pci 0000:02:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.154778] pci 0000:02:00.0: reg 0x18: [mem 0xf0404000-0xf0404fff 64bit pref]
[ 0.154800] pci 0000:02:00.0: reg 0x20: [mem 0xf0400000-0xf0403fff 64bit pref]
[ 0.154893] pci 0000:02:00.0: supports D1 D2
[ 0.154895] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.154928] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.163883] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.163891] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.163907] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.163976] pci 0000:00:1c.4: PCI bridge to [bus 03-07]
[ 0.163980] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
[ 0.163984] pci 0000:00:1c.4: bridge window [mem 0xf0e00000-0xf15fffff]
[ 0.163991] pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf0cfffff 64bit pref]
[ 0.164078] pci 0000:08:00.0: [8086:0887] type 00 class 0x028000
[ 0.164121] pci 0000:08:00.0: reg 0x10: [mem 0xf0d00000-0xf0d01fff 64bit]
[ 0.164351] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[ 0.171901] pci 0000:00:1c.5: PCI bridge to [bus 08]
[ 0.171913] pci 0000:00:1c.5: bridge window [mem 0xf0d00000-0xf0dfffff]
[ 0.171965] pci_bus 0000:00: on NUMA node 0
[ 0.172259] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.172301] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.172341] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.172380] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.172419] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.172458] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.172496] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.172536] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.175465] ACPI: Enabled 8 GPEs in block 00 to 3F
[ 0.175471] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.175514] Found 1 acpi root devices
[ 0.175535] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.175588] SCSI subsystem initialized
[ 0.175619] libata version 3.00 loaded.
[ 0.175629] ACPI: bus type USB registered
[ 0.175638] usbcore: registered new interface driver usbfs
[ 0.175642] usbcore: registered new interface driver hub
[ 0.175657] usbcore: registered new device driver usb
[ 0.175666] Linux video capture interface: v2.00
[ 0.175711] Advanced Linux Sound Architecture Driver Initialized.
[ 0.175712] PCI: Using ACPI for IRQ routing
[ 0.175714] PCI: pci_cache_line_size set to 64 bytes
[ 0.175760] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.175761] e820: reserve RAM buffer [mem 0xc7d19000-0xc7ffffff]
[ 0.175762] e820: reserve RAM buffer [mem 0xd82b3000-0xdbffffff]
[ 0.175764] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[ 0.175765] e820: reserve RAM buffer [mem 0x21f600000-0x21fffffff]
[ 0.175821] Bluetooth: Core ver 2.17
[ 0.175824] NET: Registered protocol family 31
[ 0.175825] Bluetooth: HCI device and connection manager initialized
[ 0.175827] Bluetooth: HCI socket layer initialized
[ 0.175828] Bluetooth: L2CAP socket layer initialized
[ 0.175829] Bluetooth: SCO socket layer initialized
[ 0.175881] cfg80211: Calling CRDA to update world regulatory domain
[ 0.176028] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.176033] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.178053] Switched to clocksource hpet
[ 0.178080] FS-Cache: Loaded
[ 0.178098] CacheFiles: Loaded
[ 0.178118] AppArmor: AppArmor Filesystem Enabled
[ 0.178126] pnp: PnP ACPI init
[ 0.178131] ACPI: bus type PNP registered
[ 0.178151] pnp 00:00: [dma 4]
[ 0.178164] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.178178] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.178247] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.178267] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.178296] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.178297] system 00:04: [io 0x1000-0x100f] has been reserved
[ 0.178299] system 00:04: [io 0xffff] has been reserved
[ 0.178301] system 00:04: [io 0xffff] has been reserved
[ 0.178302] system 00:04: [io 0x0400-0x0453] could not be reserved
[ 0.178304] system 00:04: [io 0x0458-0x047f] has been reserved
[ 0.178305] system 00:04: [io 0x0500-0x057f] has been reserved
[ 0.178307] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.178309] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.178326] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.178357] system 00:06: [io 0x0454-0x0457] has been reserved
[ 0.178360] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.178380] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.178400] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.178426] system 00:09: [io 0x0904-0x0907] has been reserved
[ 0.178428] system 00:09: [io 0x0900-0x0903] has been reserved
[ 0.178430] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.178520] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.178522] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.178523] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.178525] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.178527] system 00:0a: [mem 0xf8000000-0xfbffffff] could not be reserved
[ 0.178529] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.178530] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.178532] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.178533] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
[ 0.178535] system 00:0a: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.178537] system 00:0a: [mem 0xfffff000-0xffffffff] has been reserved
[ 0.178539] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.181207] pnp: PnP ACPI: found 11 devices
[ 0.181208] ACPI: bus type PNP unregistered
[ 0.187170] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.187182] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.187186] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.187193] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.187200] pci 0000:00:1c.4: PCI bridge to [bus 03-07]
[ 0.187203] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
[ 0.187208] pci 0000:00:1c.4: bridge window [mem 0xf0e00000-0xf15fffff]
[ 0.187212] pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf0cfffff 64bit pref]
[ 0.187218] pci 0000:00:1c.5: PCI bridge to [bus 08]
[ 0.187223] pci 0000:00:1c.5: bridge window [mem 0xf0d00000-0xf0dfffff]
[ 0.187232] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.187234] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.187236] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.187237] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff]
[ 0.187239] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.187240] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.187242] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.187243] pci_bus 0000:03: resource 1 [mem 0xf0e00000-0xf15fffff]
[ 0.187245] pci_bus 0000:03: resource 2 [mem 0xf0500000-0xf0cfffff 64bit pref]
[ 0.187246] pci_bus 0000:08: resource 1 [mem 0xf0d00000-0xf0dfffff]
[ 0.187263] NET: Registered protocol family 2
[ 0.187334] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.187402] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.187507] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.187522] TCP: reno registered
[ 0.187524] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.187544] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.187591] NET: Registered protocol family 1
[ 0.187600] pci 0000:00:02.0: Boot video device
[ 0.187986] PCI: CLS 64 bytes, default 64
[ 0.188033] Unpacking initramfs...
[ 0.283493] Freeing initrd memory: 7376K (ffff880037188000 - ffff8800378bc000)
[ 0.283498] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.283500] software IO TLB [mem 0xc16ea000-0xc56ea000] (64MB) mapped at [ffff8800c16ea000-ffff8800c56e9fff]
[ 0.283653] Scanning for low memory corruption every 60 seconds
[ 0.283836] audit: initializing netlink socket (disabled)
[ 0.283848] type=2000 audit(1384612320.272:1): initialized
[ 0.284041] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.284699] fuse init (API version 7.22)
[ 0.284775] msgmni has been set to 15670
[ 0.285034] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 0.285036] io scheduler noop registered
[ 0.285048] io scheduler cfq registered (default)
[ 0.285463] intel_idle: MWAIT substates: 0x21120
[ 0.285464] intel_idle: v0.4 model 0x3A
[ 0.285465] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.286695] ACPI: AC Adapter [ACAD] (off-line)
[ 0.286759] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.286763] ACPI: Power Button [PWRB]
[ 0.286786] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 0.287815] ACPI: Lid Switch [LID0]
[ 0.287872] ACPI: Fan [FAN] (off)
[ 0.293973] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.293975] ACPI: Thermal Zone [THRM] (49 C)
[ 0.294269] Linux agpgart interface v0.103
[ 0.294282] [drm] Initialized drm 1.1.0 20060810
[ 0.294476] [drm:i915_dump_device_info], i915 device info: gen=7, pciid=0x0166 flags=is_mobile,need_gfx_hws,is_ivybridge,has_fbc,has_hotplug,has_llc,
[ 0.294683] [drm:intel_detect_pch], Found PantherPoint PCH
[ 0.306211] [drm:__gen6_gt_force_wake_mt_get] *ERROR* Timed out waiting for forcewake old ack to clear.
[ 0.306524] [drm] Memory usable by graphics device = 2048M
[ 0.306525] [drm:i915_gem_gtt_init], GMADR size = 256M
[ 0.306527] [drm:i915_gem_gtt_init], GTT stolen size = 64M
[ 0.313997] ACPI: Battery Slot [BAT1] (battery present)
[ 0.331721] [drm:intel_opregion_setup], graphic opregion physical addr: 0xdaf77018
[ 0.331728] [drm:intel_opregion_setup], Public ACPI methods supported
[ 0.331729] [drm:intel_opregion_setup], SWSCI supported
[ 0.354315] [drm:swsci_setup], SWSCI GBDA callbacks 00000cf3, SBCB callbacks 00000241
[ 0.354323] [drm:intel_opregion_setup], ASLE supported
[ 0.354393] i915 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.354400] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.354402] [drm] Driver supports precise vblank timestamp query.
[ 0.354403] [drm:init_vbt_defaults], Set default to SSC at 100MHz
[ 0.354405] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT SNB/IVB-MOBILE d
[ 0.354407] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 120 display_clock_mode 0 fdi_rx_polarity_inverted 0
[ 0.354409] [drm:parse_general_definitions], crt_ddc_bus_pin: 2
[ 0.354411] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
[ 0.354413] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 0 72330 1366 1414 1446 1526 768 770 775 790 0x8 0xa
[ 0.354415] [drm:parse_lfp_panel_data], VBT initial LVDS value 300300
[ 0.354417] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
[ 0.354418] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[ 0.354420] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
[ 0.354422] [drm:parse_mipi], No MIPI BDB found
[ 0.354429] [drm:intel_dsm_pci_probe], no _DSM method for intel device
[ 0.354434] [drm:i915_gem_init_stolen], found 67108864 bytes of stolen memory at dba00000
[ 0.354461] [drm:intel_print_wm_latency], Primary WM0 latency 6 (0.6 usec)
[ 0.354462] [drm:intel_print_wm_latency], Primary WM1 latency 4 (2.0 usec)
[ 0.354463] [drm:intel_print_wm_latency], Primary WM2 latency 16 (8.0 usec)
[ 0.354465] [drm:intel_print_wm_latency], Primary WM3 latency 32 (16.0 usec)
[ 0.354466] [drm:intel_print_wm_latency], Sprite WM0 latency 6 (0.6 usec)
[ 0.354467] [drm:intel_print_wm_latency], Sprite WM1 latency 4 (2.0 usec)
[ 0.354468] [drm:intel_print_wm_latency], Sprite WM2 latency 16 (8.0 usec)
[ 0.354470] [drm:intel_print_wm_latency], Sprite WM3 latency 32 (16.0 usec)
[ 0.354471] [drm:intel_print_wm_latency], Cursor WM0 latency 6 (0.6 usec)
[ 0.354472] [drm:intel_print_wm_latency], Cursor WM1 latency 4 (2.0 usec)
[ 0.354473] [drm:intel_print_wm_latency], Cursor WM2 latency 16 (8.0 usec)
[ 0.354474] [drm:intel_print_wm_latency], Cursor WM3 latency 64 (32.0 usec)
[ 0.354476] [drm:intel_modeset_init], 3 display pipes available.
[ 0.354490] [drm:intel_shared_dpll_init], 2 shared PLLs initialized
[ 0.367687] [drm:intel_lvds_init], using preferred mode from EDID:
[ 0.367690] [drm:drm_mode_debug_printmodeline], Modeline 12:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
[ 0.367697] [drm:intel_lvds_init], detected single-link lvds configuration
[ 0.367730] [drm:intel_panel_get_backlight], get backlight PWM = 0
[ 0.367733] [drm:intel_panel_get_max_backlight], max backlight PWM = 4882
[ 0.367764] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus dpb. force bit now 1
[ 0.368160] [drm:intel_sdvo_read_byte], i2c transfer returned -6
[ 0.368162] [drm:intel_sdvo_init], No SDVO device found on SDVOB
[ 0.368177] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus dpb. force bit now 0
[ 0.368200] [drm:intel_dp_init_connector], Adding DP connector on port B
[ 0.368214] [drm:intel_dp_i2c_init], i2c_init DPDDC-B
[ 0.370716] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 0.370727] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 0.373184] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 0.373190] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 0.373213] [drm:ironlake_init_pch_refclk], has_panel 1 has_lvds 1 has_ck505 0
[ 0.373218] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, 7fdff000]
[ 0.375841] [drm:init_status_page], render ring hws offset: 0x00000000
[ 0.382305] [drm:init_pipe_control], render ring pipe control offset: 0x00021000
[ 0.382311] [drm:init_status_page], bsd ring hws offset: 0x00022000
[ 0.382369] [drm:init_status_page], blitter ring hws offset: 0x00043000
[ 0.382431] [drm:create_default_context], Default HW context loaded
[ 0.382433] [drm:i915_gem_context_init], HW context support initialized
[ 0.382460] [drm] Wrong MCH_SSKPD value: 0x20100406
[ 0.382461] [drm] This can cause pipe underruns and display issues.
[ 0.382462] [drm] Please upgrade your BIOS to fix this.
[ 0.382475] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: enabled
[ 0.382485] [drm:intel_modeset_readout_hw_state], [CRTC:5] hw state readout: enabled
[ 0.382487] [drm:intel_modeset_readout_hw_state], [CRTC:7] hw state readout: disabled
[ 0.382492] [drm:intel_modeset_readout_hw_state], PCH DPLL A hw state readout: refcount 1, on 1
[ 0.382497] [drm:intel_modeset_readout_hw_state], PCH DPLL B hw state readout: refcount 1, on 1
[ 0.382503] [drm:intel_modeset_readout_hw_state], [ENCODER:10:LVDS-10] hw state readout: enabled, pipe A
[ 0.382507] [drm:intel_modeset_readout_hw_state], [ENCODER:16:DAC-16] hw state readout: disabled, pipe A
[ 0.382512] [drm:intel_modeset_readout_hw_state], [ENCODER:17:TMDS-17] hw state readout: enabled, pipe B
[ 0.382516] [drm:intel_modeset_readout_hw_state], [ENCODER:21:TMDS-21] hw state readout: disabled, pipe A
[ 0.382520] [drm:intel_modeset_readout_hw_state], [CONNECTOR:9:LVDS-1] hw state readout: enabled
[ 0.382523] [drm:intel_modeset_readout_hw_state], [CONNECTOR:15:VGA-1] hw state readout: disabled
[ 0.382527] [drm:intel_modeset_readout_hw_state], [CONNECTOR:18:HDMI-A-1] hw state readout: enabled
[ 0.382531] [drm:intel_modeset_readout_hw_state], [CONNECTOR:22:DP-1] hw state readout: disabled
[ 0.382533] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A
[ 0.382535] [drm:intel_dump_pipe_config], cpu_transcoder: A
[ 0.382537] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 0
[ 0.382539] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 1, gmch_m: 5056233, gmch_n: 8388608, link_m: 140450, link_n: 524288, tu: 64
[ 0.382541] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 0.382543] [drm:intel_dump_pipe_config], requested mode:
[ 0.382545] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 1024 0 0 0 768 0 0 0 0x0 0x0
[ 0.382548] [drm:intel_dump_pipe_config], adjusted mode:
[ 0.382550] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
[ 0.382552] [drm:intel_dump_crtc_timings], crtc timings: 72143 1366 1414 1446 1526 768 770 775 790, type: 0x0 flags: 0xa
[ 0.382555] [drm:intel_dump_pipe_config], port clock: 72143
[ 0.382557] [drm:intel_dump_pipe_config], pipe src size: 1024x768
[ 0.382558] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 0.382560] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x05560300, enabled
[ 0.382562] [drm:intel_dump_pipe_config], ips: 0
[ 0.382564] [drm:intel_dump_pipe_config], double wide: 0
[ 0.382566] [drm:intel_dump_pipe_config], [CRTC:5][setup_hw_state] config for pipe B
[ 0.382567] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 0.382569] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[ 0.382570] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 2, gmch_m: 6815744, gmch_n: 8388608, link_m: 283989, link_n: 524288, tu: 64
[ 0.382573] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 0.382575] [drm:intel_dump_pipe_config], requested mode:
[ 0.382576] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 1024 0 0 0 768 0 0 0 0x0 0x0
[ 0.382579] [drm:intel_dump_pipe_config], adjusted mode:
[ 0.382581] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
[ 0.382583] [drm:intel_dump_crtc_timings], crtc timings: 145500 1680 1784 1960 2240 1050 1053 1059 1089, type: 0x0 flags: 0xa
[ 0.382586] [drm:intel_dump_pipe_config], port clock: 145500
[ 0.382587] [drm:intel_dump_pipe_config], pipe src size: 1024x768
[ 0.382589] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 0.382591] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x0690041a, enabled
[ 0.382593] [drm:intel_dump_pipe_config], ips: 0
[ 0.382594] [drm:intel_dump_pipe_config], double wide: 0
[ 0.382596] [drm:intel_dump_pipe_config], [CRTC:7][setup_hw_state] config for pipe C
[ 0.382598] [drm:intel_dump_pipe_config], cpu_transcoder: C
[ 0.382599] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[ 0.382601] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 0.382603] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 0.382605] [drm:intel_dump_pipe_config], requested mode:
[ 0.382607] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 0.382609] [drm:intel_dump_pipe_config], adjusted mode:
[ 0.382611] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 0.382613] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[ 0.382616] [drm:intel_dump_pipe_config], port clock: 0
[ 0.382617] [drm:intel_dump_pipe_config], pipe src size: 0x0
[ 0.382619] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 0.382621] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 0.382623] [drm:intel_dump_pipe_config], ips: 0
[ 0.382624] [drm:intel_dump_pipe_config], double wide: 0
[ 0.382628] [drm:intel_connector_check_state], [CONNECTOR:9:LVDS-1]
[ 0.382633] [drm:intel_connector_check_state], [CONNECTOR:18:HDMI-A-1]
[ 0.382638] [drm:check_encoder_state], [ENCODER:10:LVDS-10]
[ 0.382641] [drm:check_encoder_state], [ENCODER:16:DAC-16]
[ 0.382644] [drm:check_encoder_state], [ENCODER:17:TMDS-17]
[ 0.382647] [drm:check_encoder_state], [ENCODER:21:TMDS-21]
[ 0.382651] [drm:check_crtc_state], [CRTC:3]
[ 0.382664] [drm:check_crtc_state], [CRTC:5]
[ 0.382676] [drm:check_crtc_state], [CRTC:7]
[ 0.382678] [drm:check_shared_dpll_state], PCH DPLL A
[ 0.382683] [drm:check_shared_dpll_state], PCH DPLL B
[ 0.382691] [drm:intel_crt_reset], pch crt adpa set to 0xf40000
[ 0.382702] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:LVDS-1]
[ 0.382704] [drm:intel_lvds_detect], [CONNECTOR:9:LVDS-1]
[ 0.382712] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:LVDS-1] probed modes :
[ 0.382714] [drm:drm_mode_debug_printmodeline], Modeline 12:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
[ 0.382718] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:VGA-1]
[ 0.382720] [drm:intel_crt_detect], [CONNECTOR:15:VGA-1] force=1
[ 0.382723] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000
[ 0.398316] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[ 0.398318] [drm:intel_crt_detect], CRT not detected via hotplug
[ 0.398473] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 0.398476] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 0.398478] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 0.398479] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 0.398850] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 0.398851] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 0.398853] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 0.398855] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:VGA-1] disconnected
[ 0.398857] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-1]
[ 0.398860] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-1]
[ 0.424287] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[ 0.424298] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-1] probed modes :
[ 0.424300] [drm:drm_mode_debug_printmodeline], Modeline 24:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x48 0x6
[ 0.424303] [drm:drm_mode_debug_printmodeline], Modeline 37:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 0.424306] [drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 0.424309] [drm:drm_mode_debug_printmodeline], Modeline 29:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6
[ 0.424312] [drm:drm_mode_debug_printmodeline], Modeline 28:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
[ 0.424315] [drm:drm_mode_debug_printmodeline], Modeline 27:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[ 0.424318] [drm:drm_mode_debug_printmodeline], Modeline 25:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[ 0.424321] [drm:drm_mode_debug_printmodeline], Modeline 38:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 0.424324] [drm:drm_mode_debug_printmodeline], Modeline 39:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[ 0.424327] [drm:drm_mode_debug_printmodeline], Modeline 40:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 0.424330] [drm:drm_mode_debug_printmodeline], Modeline 41:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[ 0.424333] [drm:drm_mode_debug_printmodeline], Modeline 42:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 0.424336] [drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[ 0.424339] [drm:drm_mode_debug_printmodeline], Modeline 30:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 0.424342] [drm:drm_mode_debug_printmodeline], Modeline 31:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[ 0.424345] [drm:drm_mode_debug_printmodeline], Modeline 32:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 0.424348] [drm:drm_mode_debug_printmodeline], Modeline 33:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[ 0.424351] [drm:drm_mode_debug_printmodeline], Modeline 34:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[ 0.424354] [drm:drm_mode_debug_printmodeline], Modeline 35:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 0.424357] [drm:drm_mode_debug_printmodeline], Modeline 36:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 0.424360] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-1]
[ 0.424363] [drm:intel_dp_detect], [CONNECTOR:22:DP-1]
[ 0.426866] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 0.436847] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 0.444857] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 0.450373] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-1] disconnected
[ 0.450376] [drm:drm_setup_crtcs],
[ 0.450377] [drm:drm_enable_connectors], connector 9 enabled? yes
[ 0.450379] [drm:drm_enable_connectors], connector 15 enabled? no
[ 0.450381] [drm:drm_enable_connectors], connector 18 enabled? yes
[ 0.450382] [drm:drm_enable_connectors], connector 22 enabled? no
[ 0.450384] [drm:drm_target_preferred], looking for cmdline mode on connector 9
[ 0.450386] [drm:drm_target_preferred], looking for preferred mode on connector 9
[ 0.450388] [drm:drm_target_preferred], found mode 1366x768
[ 0.450389] [drm:drm_target_preferred], looking for cmdline mode on connector 18
[ 0.450391] [drm:drm_target_preferred], looking for preferred mode on connector 18
[ 0.450392] [drm:drm_target_preferred], found mode 1680x1050
[ 0.450394] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
[ 0.450398] [drm:drm_setup_crtcs], desired mode 1366x768 set on crtc 3
[ 0.450400] [drm:drm_setup_crtcs], desired mode 1680x1050 set on crtc 5
[ 0.450403] [drm:i915_gem_object_create_stolen], creating stolen object: size=6bb000
[ 0.450405] [drm:i915_pages_create_for_stolen], offset=0x0, size=7057408
[ 0.452136] [drm:intelfb_create], allocated 1680x1050 fb: 0x00072000, bo ffff880214a6ac00
[ 0.452194] fbcon: inteldrmfb (fb0) is primary device
[ 0.452220] [drm:intel_crtc_set_config], [CRTC:3] [FB:46] #connectors=1 (x y) (0 0)
[ 0.452221] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set
[ 0.452222] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
[ 0.452225] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 0.452227] [drm:drm_mode_debug_printmodeline], Modeline 44:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
[ 0.452229] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=1, fb_changed=0
[ 0.452230] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:LVDS-1] to [CRTC:3]
[ 0.452232] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-1] to [CRTC:5]
[ 0.452234] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[ 0.452236] [drm:connected_sink_compute_bpp], [CONNECTOR:9:LVDS-1] checking for sink bpp constrains
[ 0.452239] [drm:intel_lvds_compute_config], forcing display bpp (was 24) to LVDS (18)
[ 0.452241] [drm:ironlake_check_fdi_lanes], checking fdi config on pipe A, lanes 1
[ 0.452243] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
[ 0.452244] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
[ 0.452245] [drm:intel_dump_pipe_config], cpu_transcoder: A
[ 0.452246] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
[ 0.452248] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 1, gmch_m: 2528116, gmch_n: 4194304, link_m: 140450, link_n: 524288, tu: 64
[ 0.452249] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 0.452250] [drm:intel_dump_pipe_config], requested mode:
[ 0.452253] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
[ 0.452253] [drm:intel_dump_pipe_config], adjusted mode:
[ 0.452256] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
[ 0.452258] [drm:intel_dump_crtc_timings], crtc timings: 72330 1366 1414 1446 1526 768 770 775 790, type: 0x48 flags: 0xa
[ 0.452259] [drm:intel_dump_pipe_config], port clock: 72330
[ 0.452260] [drm:intel_dump_pipe_config], pipe src size: 1366x768
[ 0.452261] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 0.452263] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 0.452264] [drm:intel_dump_pipe_config], ips: 0
[ 0.452265] [drm:intel_dump_pipe_config], double wide: 0
[ 0.452266] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
[ 0.762749] [drm:intel_disable_shared_dpll], disable PCH DPLL A (active 1, on? 1) for crtc 3
[ 0.762753] [drm:intel_disable_shared_dpll], disabling PCH DPLL A
[ 0.763162] [drm:intel_update_fbc], no output, disabling
[ 0.763165] [drm:ironlake_get_refclk], using SSC reference clock of 120 MHz
[ 0.763182] [drm:intel_get_shared_dpll], CRTC:3 dropping existing PCH DPLL A
[ 0.763183] [drm:intel_get_shared_dpll], CRTC:3 allocated PCH DPLL A
[ 0.763184] [drm:intel_get_shared_dpll], using PCH DPLL A for pipe A
[ 0.763185] [drm:intel_get_shared_dpll], setting up PCH DPLL A
[ 0.763194] [drm:ironlake_update_plane], Writing base 00072000 00000000 0 0 6720
[ 0.763196] [drm:intel_crtc_mode_set], [ENCODER:10:LVDS-10] set [MODE:0:1366x768]
[ 0.763733] [drm:ivybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6
[ 0.763734] [drm:ironlake_check_srwm], watermark 1: display plane 12, fbc lines 3, cursor 6
[ 0.763735] [drm:ironlake_check_srwm], watermark 2: display plane 39, fbc lines 3, cursor 6
[ 0.763737] [drm:ironlake_check_srwm], watermark 3: display plane 75, fbc lines 3, cursor 6
[ 0.763738] [drm:ironlake_check_srwm], watermark 3: display plane 147, fbc lines 4, cursor 10
[ 0.826814] [drm:ironlake_wait_for_vblank], vblank wait timed out
[ 0.890887] [drm:ironlake_wait_for_vblank], vblank wait timed out
[ 0.891043] [drm:ivb_manual_fdi_link_train], FDI_RX_IIR before link train 0x700
[ 0.891052] [drm:ivb_manual_fdi_link_train], FDI_RX_IIR 0x700
[ 0.891054] [drm:ivb_manual_fdi_link_train], FDI train 1 done, level 0.
[ 0.891061] [drm:ivb_manual_fdi_link_train], FDI_RX_IIR 0x600
[ 0.891063] [drm:ivb_manual_fdi_link_train], FDI train 2 done, level 0.
[ 0.891063] [drm:ivb_manual_fdi_link_train], FDI train done.
[ 0.891066] [drm:ironlake_enable_shared_dpll], enable PCH DPLL A (active 0, on? 0)for crtc 3
[ 0.891067] [drm:ironlake_enable_shared_dpll], enabling PCH DPLL A
[ 0.892433] [drm:intel_update_fbc], disabled per chip default
[ 0.909196] [drm:cpt_serr_int_handler], PCH transcoder A FIFO underrun
[ 1.147182] [drm:intel_panel_enable_backlight], pipe A
[ 1.147185] [drm:intel_panel_get_max_backlight], max backlight PWM = 4882
[ 1.147188] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4882
[ 1.163200] [drm:intel_connector_check_state], [CONNECTOR:9:LVDS-1]
[ 1.163204] [drm:intel_connector_check_state], [CONNECTOR:18:HDMI-A-1]
[ 1.163208] [drm:check_encoder_state], [ENCODER:10:LVDS-10]
[ 1.163211] [drm:check_encoder_state], [ENCODER:16:DAC-16]
[ 1.163213] [drm:check_encoder_state], [ENCODER:17:TMDS-17]
[ 1.163216] [drm:check_encoder_state], [ENCODER:21:TMDS-21]
[ 1.163218] [drm:check_crtc_state], [CRTC:3]
[ 1.163231] [drm:check_crtc_state], [CRTC:5]
[ 1.163242] [drm:check_crtc_state], [CRTC:7]
[ 1.163243] [drm:check_shared_dpll_state], PCH DPLL A
[ 1.163248] [drm:check_shared_dpll_state], PCH DPLL B
[ 1.163251] [drm:intel_crtc_set_config], [CRTC:5] [FB:46] #connectors=1 (x y) (0 0)
[ 1.163253] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set
[ 1.163253] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
[ 1.163255] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 1.163257] [drm:drm_mode_debug_printmodeline], Modeline 45:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x48 0x6
[ 1.163258] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=1, fb_changed=0
[ 1.163259] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:LVDS-1] to [CRTC:3]
[ 1.163260] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-1] to [CRTC:5]
[ 1.163262] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
[ 1.163263] [drm:connected_sink_compute_bpp], [CONNECTOR:18:HDMI-A-1] checking for sink bpp constrains
[ 1.163264] [drm:intel_hdmi_compute_config], picking bpc to 8 for HDMI output
[ 1.163265] [drm:intel_hdmi_compute_config], forcing pipe bpc to 24 for HDMI
[ 1.163266] [drm:ironlake_check_fdi_lanes], checking fdi config on pipe B, lanes 2
[ 1.163267] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
[ 1.163268] [drm:intel_dump_pipe_config], [CRTC:5][modeset] config for pipe B
[ 1.163268] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 1.163269] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[ 1.163270] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 2, gmch_m: 6815744, gmch_n: 8388608, link_m: 283989, link_n: 524288, tu: 64
[ 1.163271] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.163272] [drm:intel_dump_pipe_config], requested mode:
[ 1.163274] [drm:drm_mode_debug_printmodeline], Modeline 0:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x48 0x6
[ 1.163274] [drm:intel_dump_pipe_config], adjusted mode:
[ 1.163276] [drm:drm_mode_debug_printmodeline], Modeline 0:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x48 0x6
[ 1.163277] [drm:intel_dump_crtc_timings], crtc timings: 146250 1680 1784 1960 2240 1050 1053 1059 1089, type: 0x48 flags: 0x6
[ 1.163278] [drm:intel_dump_pipe_config], port clock: 146250
[ 1.163278] [drm:intel_dump_pipe_config], pipe src size: 1680x1050
[ 1.163279] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 1.163280] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1.163281] [drm:intel_dump_pipe_config], ips: 0
[ 1.163281] [drm:intel_dump_pipe_config], double wide: 0
[ 1.211259] [drm:intel_disable_shared_dpll], disable PCH DPLL B (active 1, on? 1) for crtc 5
[ 1.211263] [drm:intel_disable_shared_dpll], disabling PCH DPLL B
[ 1.211670] [drm:ivybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6
[ 1.211672] [drm:ironlake_check_srwm], watermark 1: display plane 12, fbc lines 3, cursor 6
[ 1.211673] [drm:ironlake_check_srwm], watermark 2: display plane 39, fbc lines 3, cursor 6
[ 1.211674] [drm:ironlake_check_srwm], watermark 3: display plane 75, fbc lines 3, cursor 6
[ 1.211675] [drm:ironlake_check_srwm], watermark 3: display plane 147, fbc lines 4, cursor 10
[ 1.211680] [drm:ivb_modeset_global_resources], disabling fdi C rx
[ 1.211700] [drm:intel_get_shared_dpll], CRTC:5 dropping existing PCH DPLL B
[ 1.211701] [drm:intel_get_shared_dpll], CRTC:5 allocated PCH DPLL B
[ 1.211702] [drm:intel_get_shared_dpll], using PCH DPLL B for pipe B
[ 1.211702] [drm:intel_get_shared_dpll], setting up PCH DPLL B
[ 1.211710] [drm:ironlake_update_plane], Writing base 00072000 00000000 0 0 6720
[ 1.211713] [drm:intel_crtc_mode_set], [ENCODER:17:TMDS-17] set [MODE:0:1680x1050]
[ 1.212247] [drm:ivybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6
[ 1.212248] [drm:ivybridge_update_wm], FIFO watermarks For pipe B - plane 8, cursor: 6
[ 1.275326] [drm:ironlake_wait_for_vblank], vblank wait timed out
[ 1.283336] tsc: Refined TSC clocksource calibration: 2494.333 MHz
[ 1.339463] [drm:ironlake_wait_for_vblank], vblank wait timed out
[ 1.339469] [drm:cpt_enable_fdi_bc_bifurcation], enabling fdi C rx
[ 1.339627] [drm:ivb_manual_fdi_link_train], FDI_RX_IIR before link train 0x700
[ 1.339635] [drm:ivb_manual_fdi_link_train], FDI_RX_IIR 0x700
[ 1.339637] [drm:ivb_manual_fdi_link_train], FDI train 1 done, level 0.
[ 1.339645] [drm:ivb_manual_fdi_link_train], FDI_RX_IIR 0x600
[ 1.339646] [drm:ivb_manual_fdi_link_train], FDI train 2 done, level 0.
[ 1.339647] [drm:ivb_manual_fdi_link_train], FDI train done.
[ 1.339650] [drm:ironlake_enable_shared_dpll], enable PCH DPLL B (active 0, on? 0)for crtc 5
[ 1.339651] [drm:ironlake_enable_shared_dpll], enabling PCH DPLL B
[ 1.341019] [drm:intel_update_fbc], more than one pipe active, disabling compression
[ 1.363493] [drm:intel_connector_check_state], [CONNECTOR:9:LVDS-1]
[ 1.363499] [drm:intel_connector_check_state], [CONNECTOR:18:HDMI-A-1]
[ 1.363503] [drm:check_encoder_state], [ENCODER:10:LVDS-10]
[ 1.363505] [drm:check_encoder_state], [ENCODER:16:DAC-16]
[ 1.363508] [drm:check_encoder_state], [ENCODER:17:TMDS-17]
[ 1.363510] [drm:check_encoder_state], [ENCODER:21:TMDS-21]
[ 1.363513] [drm:check_crtc_state], [CRTC:3]
[ 1.363527] [drm:check_crtc_state], [CRTC:5]
[ 1.363538] [drm:check_crtc_state], [CRTC:7]
[ 1.363540] [drm:check_shared_dpll_state], PCH DPLL A
[ 1.363544] [drm:check_shared_dpll_state], PCH DPLL B
[ 1.363550] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
[ 1.363552] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:7], mode_changed=0, fb_changed=0
[ 1.363553] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:LVDS-1] to [CRTC:3]
[ 1.363554] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-1] to [CRTC:5]
[ 1.363715] [drm:intel_crtc_set_config], [CRTC:3] [FB:46] #connectors=1 (x y) (0 0)
[ 1.363716] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 1.363717] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:LVDS-1] to [CRTC:3]
[ 1.363718] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-1] to [CRTC:5]
[ 1.363720] [drm:intel_crtc_set_config], [CRTC:5] [FB:46] #connectors=1 (x y) (0 0)
[ 1.363721] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
[ 1.363722] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:LVDS-1] to [CRTC:3]
[ 1.363723] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-1] to [CRTC:5]
[ 1.366112] Console: switching to colour frame buffer device 170x48
[ 1.366114] [drm:intel_crtc_set_config], [CRTC:3] [FB:46] #connectors=1 (x y) (0 0)
[ 1.366115] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 1.366116] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:LVDS-1] to [CRTC:3]
[ 1.366117] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-1] to [CRTC:5]
[ 1.366118] [drm:intel_crtc_set_config], [CRTC:5] [FB:46] #connectors=1 (x y) (0 0)
[ 1.366119] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
[ 1.366120] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:LVDS-1] to [CRTC:3]
[ 1.366121] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-1] to [CRTC:5]
[ 1.368581] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.368583] i915 0000:00:02.0: registered panic notifier
[ 1.369225] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.374316] acpi device:44: registered as cooling_device5
[ 1.374388] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input2
[ 1.374409] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.375373] loop: module loaded
[ 1.375434] ahci 0000:00:1f.2: version 3.0
[ 1.375544] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 1.391477] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[ 1.391483] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 1.399812] scsi0 : ahci
[ 1.399959] scsi1 : ahci
[ 1.400082] scsi2 : ahci
[ 1.400225] scsi3 : ahci
[ 1.400338] scsi4 : ahci
[ 1.400478] scsi5 : ahci
[ 1.400515] ata1: SATA max UDMA/133 abar m2048@0xf1618000 port 0xf1618100 irq 41
[ 1.400517] ata2: DUMMY
[ 1.400519] ata3: SATA max UDMA/133 abar m2048@0xf1618000 port 0xf1618200 irq 41
[ 1.400520] ata4: DUMMY
[ 1.400521] ata5: DUMMY
[ 1.400522] ata6: DUMMY
[ 1.400567] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.400576] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.400804] r8169 0000:02:00.0: irq 42 for MSI/MSI-X
[ 1.400906] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000028000, 5c:9a:d8:69:2b:39, XID 0c900800 IRQ 42
[ 1.400908] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.400922] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 1.400923] Copyright(c) 2003-2013 Intel Corporation
[ 1.400979] iwlwifi 0000:08:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.401028] iwlwifi 0000:08:00.0: irq 43 for MSI/MSI-X
[ 1.401114] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.401116] ehci-pci: EHCI PCI platform driver
[ 1.401187] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.401192] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.401206] ehci-pci 0000:00:1a.0: debug port 2
[ 1.405119] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.405130] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf161a000
[ 1.405255] iwlwifi 0000:08:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 1.405264] iwlwifi 0000:08:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 1.405266] iwlwifi 0000:08:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 1.405267] iwlwifi 0000:08:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 1.405268] iwlwifi 0000:08:00.0: Detected Intel(R) Centrino(R) Wireless-N 2230 BGN, REV=0xC8
[ 1.405333] iwlwifi 0000:08:00.0: L1 Disabled; Enabling L0S
[ 1.412836] iwlwifi 0000:08:00.0: RF_KILL bit toggled to disable radio.
[ 1.415512] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.415632] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.415634] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.415636] usb usb1: Product: EHCI Host Controller
[ 1.415637] usb usb1: Manufacturer: Linux 3.12.0-09888-gf63c482 ehci_hcd
[ 1.415639] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.415797] hub 1-0:1.0: USB hub found
[ 1.415803] hub 1-0:1.0: 3 ports detected
[ 1.415999] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.416003] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.416034] ehci-pci 0000:00:1d.0: debug port 2
[ 1.419949] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.419966] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf1619000
[ 1.424247] cfg80211: Ignoring regulatory request set by core since the driver uses its own custom regulatory domain
[ 1.424277] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 1.431569] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.431617] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.431619] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.431621] usb usb2: Product: EHCI Host Controller
[ 1.431622] usb usb2: Manufacturer: Linux 3.12.0-09888-gf63c482 ehci_hcd
[ 1.431624] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.431812] hub 2-0:1.0: USB hub found
[ 1.431820] hub 2-0:1.0: 3 ports detected
[ 1.432061] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.432067] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.432162] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.432185] xhci_hcd 0000:00:14.0: irq 44 for MSI/MSI-X
[ 1.432247] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.432249] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.432250] usb usb3: Product: xHCI Host Controller
[ 1.432252] usb usb3: Manufacturer: Linux 3.12.0-09888-gf63c482 xhci_hcd
[ 1.432253] usb usb3: SerialNumber: 0000:00:14.0
[ 1.432404] hub 3-0:1.0: USB hub found
[ 1.432414] hub 3-0:1.0: 4 ports detected
[ 1.432632] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.432635] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.432665] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.432667] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.432668] usb usb4: Product: xHCI Host Controller
[ 1.432670] usb usb4: Manufacturer: Linux 3.12.0-09888-gf63c482 xhci_hcd
[ 1.432671] usb usb4: SerialNumber: 0000:00:14.0
[ 1.432805] hub 4-0:1.0: USB hub found
[ 1.432815] hub 4-0:1.0: 4 ports detected
[ 1.439668] usbcore: registered new interface driver usblp
[ 1.439684] usbcore: registered new interface driver usb-storage
[ 1.439689] usbcore: registered new interface driver ums-realtek
[ 1.439714] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.445326] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.445331] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.445537] mousedev: PS/2 mouse device common for all mice
[ 1.445940] ACPI Warning: 0x000000000000efa0-0x000000000000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130927/utaddress-251)
[ 1.445945] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.445962] usbcore: registered new interface driver cinergyT2
[ 1.445963] uvcvideo: Unable to create debugfs directory
[ 1.445969] usbcore: registered new interface driver uvcvideo
[ 1.445970] USB Video Class driver (1.1.1)
[ 1.446103] device-mapper: uevent: version 1.0.3
[ 1.446189] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 1.446192] Intel P-state driver initializing.
[ 1.446202] Intel pstate controlling: cpu 0
[ 1.446213] Intel pstate controlling: cpu 1
[ 1.446223] Intel pstate controlling: cpu 2
[ 1.446231] Intel pstate controlling: cpu 3
[ 1.446241] EFI Variables Facility v0.08 2004-May-17
[ 1.446245] efivars: get_next_variable: status=8000000000000002
[ 1.446254] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.446263] usbcore: registered new interface driver usbhid
[ 1.446264] usbhid: USB HID core driver
[ 1.446294] input: Fujitsu FUJ02B1 as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/FUJ02B1:00/input/input4
[ 1.446336] fujitsu_laptop: ACPI: Fujitsu FUJ02B1 [FJEX] (on)
[ 1.446905] input: Fujitsu FUJ02E3 as /devices/LNXSYSTM:00/device:00/FUJ02E3:00/input/input5
[ 1.446929] fujitsu_laptop: ACPI: Fujitsu FUJ02E3 [FEXT] (on)
[ 1.447036] fujitsu_laptop: BTNI: [0x80001]
[ 1.447082] fujitsu_laptop: driver 0.6.0 successfully loaded
[ 1.447267] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 1.456156] hda_codec: ALC269VC: SKU not ready 0x909701f0
[ 1.457801] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.463505] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 1.463626] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 1.463705] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 1.464023] TCP: cubic registered
[ 1.464129] NET: Registered protocol family 10
[ 1.464379] NET: Registered protocol family 17
[ 1.464431] Bluetooth: RFCOMM TTY layer initialized
[ 1.464439] Bluetooth: RFCOMM socket layer initialized
[ 1.464441] Bluetooth: RFCOMM ver 1.11
[ 1.464454] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 1.464455] Bluetooth: BNEP filters: protocol multicast
[ 1.464457] Bluetooth: BNEP socket layer initialized
[ 1.464458] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 1.464460] Bluetooth: HIDP socket layer initialized
[ 1.465217] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.465220] EDD information not available.
[ 1.465282] ALSA device list:
[ 1.465284] #0: HDA Intel PCH at 0xf1610000 irq 45
[ 1.719908] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.719938] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.720589] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.721852] ata3.00: ATAPI: Optiarc DVD RW AD-7760H, 1.50, max UDMA/100
[ 1.724044] ata3.00: configured for UDMA/100
[ 1.727977] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.756992] ata1.00: ATA-8: TOSHIBA MK7575GSX, GT001A, max UDMA/100
[ 1.756997] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.757826] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.758130] ata1.00: configured for UDMA/100
[ 1.758395] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK7575GS GT00 PQ: 0 ANSI: 5
[ 1.758653] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 1.758656] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.758668] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.758875] sd 0:0:0:0: [sda] Write Protect is off
[ 1.758880] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.759039] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.759353] scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7760H 1.50 PQ: 0 ANSI: 5
[ 1.761260] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.761264] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.761452] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.761558] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 1.829044] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 1.843993] [drm:gen6_enable_rps], Overclocking supported. Max: 1100MHz, Overclock max: 1100MHz
[ 1.848794] sda: sda1 sda2 sda3
[ 1.849980] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.851088] Freeing unused kernel memory: 776K (ffffffff81a6b000 - ffffffff81b2d000)
[ 1.851104] Write protecting the kernel read-only data: 10240k
[ 1.857070] Freeing unused kernel memory: 2020K (ffff880001607000 - ffff880001800000)
[ 1.857930] Freeing unused kernel memory: 268K (ffff8800019bd000 - ffff880001a00000)
[ 1.860339] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.860344] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.860622] hub 1-1:1.0: USB hub found
[ 1.860709] hub 1-1:1.0: 6 ports detected
[ 1.879524] udevd[104]: starting version 175
[ 1.886955] [drm:intel_crtc_set_config], [CRTC:3] [FB:46] #connectors=1 (x y) (0 0)
[ 1.886959] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 1.886962] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:LVDS-1] to [CRTC:3]
[ 1.886964] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-1] to [CRTC:5]
[ 1.886966] [drm:intel_crtc_set_config], [CRTC:5] [FB:46] #connectors=1 (x y) (0 0)
[ 1.886969] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
[ 1.886971] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:LVDS-1] to [CRTC:3]
[ 1.886973] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-1] to [CRTC:5]
[ 1.909348] psmouse serio1: alps: Unknown ALPS touchpad: E7=73 03 50, EC=73 02 02
[ 1.972142] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.987272] [drm:i915_gem_open],
[ 1.987288] [drm:intel_crtc_cursor_set], cursor off
[ 1.987291] [drm:intel_crtc_set_config], [CRTC:3] [FB:46] #connectors=1 (x y) (0 0)
[ 1.987295] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 1.987298] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:LVDS-1] to [CRTC:3]
[ 1.987300] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-1] to [CRTC:5]
[ 1.987302] [drm:intel_crtc_cursor_set], cursor off
[ 1.987304] [drm:intel_crtc_set_config], [CRTC:5] [FB:46] #connectors=1 (x y) (0 0)
[ 1.987306] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
[ 1.987308] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:LVDS-1] to [CRTC:3]
[ 1.987310] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-1] to [CRTC:5]
[ 1.987312] [drm:intel_crtc_cursor_set], cursor off
[ 1.987313] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
[ 1.987315] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:7], mode_changed=0, fb_changed=0
[ 1.987317] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:LVDS-1] to [CRTC:3]
[ 1.987319] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-1] to [CRTC:5]
[ 1.987329] [drm:i915_gem_open],
[ 1.987338] [drm:intel_crtc_cursor_set], cursor off
[ 1.987339] [drm:intel_crtc_set_config], [CRTC:3] [FB:46] #connectors=1 (x y) (0 0)
[ 1.987341] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 1.987344] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:LVDS-1] to [CRTC:3]
[ 1.987345] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-1] to [CRTC:5]
[ 1.987347] [drm:intel_crtc_cursor_set], cursor off
[ 1.987349] [drm:intel_crtc_set_config], [CRTC:5] [FB:46] #connectors=1 (x y) (0 0)
[ 1.987351] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
[ 1.987353] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:LVDS-1] to [CRTC:3]
[ 1.987355] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-1] to [CRTC:5]
[ 1.987356] [drm:intel_crtc_cursor_set], cursor off
[ 1.987358] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
[ 1.987359] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:7], mode_changed=0, fb_changed=0
[ 1.987361] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:LVDS-1] to [CRTC:3]
[ 1.987363] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-1] to [CRTC:5]
[ 1.987372] [drm:i915_gem_open],
[ 1.987448] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[4] ENCODERS[4]
[ 1.987452] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[4] ENCODERS[4]
[ 1.987460] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
[ 1.987463] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:LVDS-1]
[ 1.987465] [drm:intel_lvds_detect], [CONNECTOR:9:LVDS-1]
[ 1.987473] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:LVDS-1] probed modes :
[ 1.987475] [drm:drm_mode_debug_printmodeline], Modeline 12:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
[ 1.987480] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
[ 1.989969] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 1.989972] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:VGA-1]
[ 1.989974] [drm:intel_crt_detect], [CONNECTOR:15:VGA-1] force=1
[ 1.989976] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[ 1.989977] [drm:intel_crt_detect], CRT not detected via hotplug
[ 1.990133] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 1.990138] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 1.990141] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 1.990142] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 1.990509] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 1.990510] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 1.990511] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 1.990513] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:VGA-1] disconnected
[ 1.990517] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 1.990518] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:VGA-1]
[ 1.990519] [drm:intel_crt_detect], [CONNECTOR:15:VGA-1] force=1
[ 1.990521] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[ 1.990522] [drm:intel_crt_detect], CRT not detected via hotplug
[ 1.990682] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 1.990685] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 1.990687] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 1.990688] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 1.991054] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 1.991055] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 1.991056] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 1.991057] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:VGA-1] disconnected
[ 1.991062] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
[ 1.991063] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-1]
[ 1.991066] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-1]
[ 2.016524] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[ 2.016558] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-1] probed modes :
[ 2.016560] [drm:drm_mode_debug_printmodeline], Modeline 24:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x48 0x6
[ 2.016562] [drm:drm_mode_debug_printmodeline], Modeline 37:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 2.016564] [drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 2.016566] [drm:drm_mode_debug_printmodeline], Modeline 29:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6
[ 2.016568] [drm:drm_mode_debug_printmodeline], Modeline 28:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
[ 2.016570] [drm:drm_mode_debug_printmodeline], Modeline 27:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[ 2.016572] [drm:drm_mode_debug_printmodeline], Modeline 25:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[ 2.016573] [drm:drm_mode_debug_printmodeline], Modeline 38:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 2.016575] [drm:drm_mode_debug_printmodeline], Modeline 39:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[ 2.016578] [drm:drm_mode_debug_printmodeline], Modeline 40:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 2.016579] [drm:drm_mode_debug_printmodeline], Modeline 41:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[ 2.016581] [drm:drm_mode_debug_printmodeline], Modeline 42:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 2.016583] [drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[ 2.016585] [drm:drm_mode_debug_printmodeline], Modeline 30:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 2.016587] [drm:drm_mode_debug_printmodeline], Modeline 31:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[ 2.016588] [drm:drm_mode_debug_printmodeline], Modeline 32:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 2.016590] [drm:drm_mode_debug_printmodeline], Modeline 33:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[ 2.016592] [drm:drm_mode_debug_printmodeline], Modeline 34:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[ 2.016594] [drm:drm_mode_debug_printmodeline], Modeline 35:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 2.016595] [drm:drm_mode_debug_printmodeline], Modeline 36:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 2.016602] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
[ 2.020491] [drm:drm_mode_getconnector], [CONNECTOR:22:?]
[ 2.020494] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-1]
[ 2.020496] [drm:intel_dp_detect], [CONNECTOR:22:DP-1]
[ 2.023019] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 2.030682] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 2.038698] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 2.044194] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-1] disconnected
[ 2.044199] [drm:drm_mode_getconnector], [CONNECTOR:22:?]
[ 2.044200] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-1]
[ 2.044202] [drm:intel_dp_detect], [CONNECTOR:22:DP-1]
[ 2.046703] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 2.054710] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 2.062690] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 2.068223] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-1] disconnected
[ 2.104589] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.104592] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.104734] hub 2-1:1.0: USB hub found
[ 2.104836] hub 2-1:1.0: 6 ports detected
[ 2.272477] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[ 2.284537] Switched to clocksource tsc
[ 2.288818] usb 3-1: config 1 interface 0 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64
[ 2.288821] usb 3-1: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64
[ 2.289216] usb 3-1: New USB device found, idVendor=0ccd, idProduct=0038
[ 2.289218] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.289220] usb 3-1: Product: Cinergy T\xffffffc2\xffffffb2\xffffffb2
[ 2.289222] usb 3-1: Manufacturer: TerraTec GmbH
[ 2.289641] dvb-usb: found a 'TerraTec/qanu USB2.0 Highspeed DVB-T Receiver' in warm state.
[ 2.293099] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 2.293162] DVB: registering new adapter (TerraTec/qanu USB2.0 Highspeed DVB-T Receiver)
[ 2.293409] usb 3-1: DVB: registering adapter 0 frontend 0 (TerraTec/qanu USB2.0 Highspeed DVB-T Receiver)...
[ 2.293618] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-1/input/input11
[ 2.293663] dvb-usb: schedule remote query interval to 50 msecs.
[ 2.294310] dvb-usb: TerraTec/qanu USB2.0 Highspeed DVB-T Receiver successfully initialized and connected.
[ 2.327243] [drm:drm_mode_addfb], [FB:47]
[ 2.327264] [drm:drm_mode_setcrtc], [CRTC:3]
[ 2.327268] [drm:drm_mode_setcrtc], [CONNECTOR:9:LVDS-1]
[ 2.327269] [drm:intel_crtc_set_config], [CRTC:3] [FB:47] #connectors=1 (x y) (0 0)
[ 2.327272] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=1
[ 2.327273] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:LVDS-1] to [CRTC:3]
[ 2.327275] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-1] to [CRTC:5]
[ 2.329298] [drm:ironlake_update_plane], Writing base 0072D000 00000000 0 0 5632
[ 2.336601] [drm:drm_mode_addfb], [FB:48]
[ 2.336640] [drm:drm_mode_setcrtc], [CRTC:5]
[ 2.336644] [drm:drm_mode_setcrtc], [CONNECTOR:18:HDMI-A-1]
[ 2.336646] [drm:intel_crtc_set_config], [CRTC:5] [FB:48] #connectors=1 (x y) (0 0)
[ 2.336648] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=1
[ 2.336650] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:LVDS-1] to [CRTC:3]
[ 2.336651] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-1] to [CRTC:5]
[ 2.340005] [drm:ironlake_update_plane], Writing base 00C2D000 00000000 0 0 6912
[ 2.363142] [drm:drm_mode_setcrtc], [CRTC:3]
[ 2.363149] [drm:drm_mode_setcrtc], [CONNECTOR:9:LVDS-1]
[ 2.363151] [drm:intel_crtc_set_config], [CRTC:3] [FB:47] #connectors=1 (x y) (0 0)
[ 2.363153] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 2.363155] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:LVDS-1] to [CRTC:3]
[ 2.363156] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-1] to [CRTC:5]
[ 2.363159] [drm:drm_mode_setcrtc], [CRTC:5]
[ 2.363160] [drm:drm_mode_setcrtc], [CONNECTOR:18:HDMI-A-1]
[ 2.363161] [drm:intel_crtc_set_config], [CRTC:5] [FB:48] #connectors=1 (x y) (0 0)
[ 2.363163] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
[ 2.363164] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:LVDS-1] to [CRTC:3]
[ 2.363165] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-1] to [CRTC:5]
[ 2.364701] usb 1-1.2: new high-speed USB device number 3 using ehci-pci
[ 2.404499] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.462553] usb 1-1.2: New USB device found, idVendor=05e3, idProduct=0605
[ 2.462558] usb 1-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.462560] usb 1-1.2: Product: USB2.0 Hub
[ 2.463101] hub 1-1.2:1.0: USB hub found
[ 2.463436] hub 1-1.2:1.0: 4 ports detected
[ 2.503833] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input7
[ 2.536854] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
[ 2.726274] usb 1-1.4: New USB device found, idVendor=04f2, idProduct=b302
[ 2.726279] usb 1-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 2.726281] usb 1-1.4: Product: FJ Camera
[ 2.726283] usb 1-1.4: Manufacturer: Chicony Electronics Co., Ltd.
[ 2.729157] uvcvideo: Found UVC 1.00 device FJ Camera (04f2:b302)
[ 2.753254] input: FJ Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input12
[ 2.825481] usb 1-1.2.1: new low-speed USB device number 5 using ehci-pci
[ 2.936258] usb 1-1.2.1: New USB device found, idVendor=05af, idProduct=8277
[ 2.936263] usb 1-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.936266] usb 1-1.2.1: Product: USB Keyboard
[ 2.936268] usb 1-1.2.1: Manufacturer:
[ 2.946409] input: USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/input/input13
[ 2.946701] hid-generic 0003:05AF:8277.0001: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1a.0-1.2.1/input0
[ 2.957802] input: USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.1/input/input14
[ 2.958107] hid-generic 0003:05AF:8277.0002: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1a.0-1.2.1/input1
[ 3.029725] usb 1-1.2.3: new low-speed USB device number 6 using ehci-pci
[ 3.127412] usb 1-1.2.3: New USB device found, idVendor=046d, idProduct=c024
[ 3.127417] usb 1-1.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.127420] usb 1-1.2.3: Product: USB-PS/2 Optical Mouse
[ 3.127423] usb 1-1.2.3: Manufacturer: B16_b_02
[ 3.130712] input: B16_b_02 USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.3/1-1.2.3:1.0/input/input15
[ 3.130824] hid-generic 0003:046D:C024.0003: input,hidraw2: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.2.3/input0
[ 13.295703] efivars: get_next_variable: status=8000000000000002
[ 13.416913] udevd[458]: starting version 175
[ 13.676699] type=1400 audit(1384612333.646:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=653 comm="apparmor_parser"
[ 13.676705] type=1400 audit(1384612333.646:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=653 comm="apparmor_parser"
[ 13.676708] type=1400 audit(1384612333.646:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=653 comm="apparmor_parser"
[ 13.676747] type=1400 audit(1384612333.646:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=645 comm="apparmor_parser"
[ 13.676754] type=1400 audit(1384612333.646:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=645 comm="apparmor_parser"
[ 13.676758] type=1400 audit(1384612333.646:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=645 comm="apparmor_parser"
[ 13.676765] type=1400 audit(1384612333.646:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=597 comm="apparmor_parser"
[ 13.676771] type=1400 audit(1384612333.646:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=597 comm="apparmor_parser"
[ 13.676775] type=1400 audit(1384612333.646:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=597 comm="apparmor_parser"
[ 13.677043] type=1400 audit(1384612333.646:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=653 comm="apparmor_parser"
[ 14.113792] init: udev-fallback-graphics main process (728) terminated with status 1
[ 14.281674] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 14.375355] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 14.481878] init: failsafe main process (773) killed by TERM signal
[ 14.752819] r8169 0000:02:00.0 eth0: link down
[ 14.752849] r8169 0000:02:00.0 eth0: link down
[ 14.752874] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.854556] [drm:i915_gem_open],
[ 14.854592] [drm:i915_gem_open],
[ 14.854750] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[4] ENCODERS[4]
[ 14.854753] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[4] ENCODERS[4]
[ 14.854787] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
[ 14.854790] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:LVDS-1]
[ 14.854791] [drm:intel_lvds_detect], [CONNECTOR:9:LVDS-1]
[ 14.854798] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:LVDS-1] probed modes :
[ 14.854799] [drm:drm_mode_debug_printmodeline], Modeline 12:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
[ 14.854802] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
[ 14.856054] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 14.856056] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:VGA-1]
[ 14.856058] [drm:intel_crt_detect], [CONNECTOR:15:VGA-1] force=1
[ 14.856060] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[ 14.856062] [drm:intel_crt_detect], CRT not detected via hotplug
[ 14.856227] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 14.856232] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 14.856234] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 14.856236] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 14.856616] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 14.856617] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 14.856618] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 14.856619] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:VGA-1] disconnected
[ 14.856622] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 14.856623] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:VGA-1]
[ 14.856624] [drm:intel_crt_detect], [CONNECTOR:15:VGA-1] force=1
[ 14.856627] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[ 14.856628] [drm:intel_crt_detect], CRT not detected via hotplug
[ 14.856782] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 14.856785] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 14.856788] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 14.856790] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 14.857156] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 14.857157] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 14.857158] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 14.857159] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:VGA-1] disconnected
[ 14.857175] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
[ 14.857177] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-1]
[ 14.857179] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-1]
[ 14.882623] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[ 14.882654] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-1] probed modes :
[ 14.882659] [drm:drm_mode_debug_printmodeline], Modeline 24:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x48 0x6
[ 14.882673] [drm:drm_mode_debug_printmodeline], Modeline 37:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 14.882675] [drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 14.882678] [drm:drm_mode_debug_printmodeline], Modeline 29:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6
[ 14.882681] [drm:drm_mode_debug_printmodeline], Modeline 28:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
[ 14.882683] [drm:drm_mode_debug_printmodeline], Modeline 27:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[ 14.882686] [drm:drm_mode_debug_printmodeline], Modeline 25:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[ 14.882689] [drm:drm_mode_debug_printmodeline], Modeline 38:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 14.882691] [drm:drm_mode_debug_printmodeline], Modeline 39:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[ 14.882694] [drm:drm_mode_debug_printmodeline], Modeline 40:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 14.882696] [drm:drm_mode_debug_printmodeline], Modeline 41:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[ 14.882699] [drm:drm_mode_debug_printmodeline], Modeline 42:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 14.882701] [drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[ 14.882704] [drm:drm_mode_debug_printmodeline], Modeline 30:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 14.882706] [drm:drm_mode_debug_printmodeline], Modeline 31:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[ 14.882709] [drm:drm_mode_debug_printmodeline], Modeline 32:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 14.882711] [drm:drm_mode_debug_printmodeline], Modeline 33:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[ 14.882714] [drm:drm_mode_debug_printmodeline], Modeline 34:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[ 14.882716] [drm:drm_mode_debug_printmodeline], Modeline 35:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 14.882718] [drm:drm_mode_debug_printmodeline], Modeline 36:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 14.882725] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
[ 14.882753] [drm:drm_mode_getconnector], [CONNECTOR:22:?]
[ 14.882756] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-1]
[ 14.882758] [drm:intel_dp_detect], [CONNECTOR:22:DP-1]
[ 14.885253] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 14.893341] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 14.901473] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 14.906886] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-1] disconnected
[ 14.906899] [drm:drm_mode_getconnector], [CONNECTOR:22:?]
[ 14.906910] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-1]
[ 14.906912] [drm:intel_dp_detect], [CONNECTOR:22:DP-1]
[ 14.909447] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 14.917555] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 14.925445] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 14.930968] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-1] disconnected
[ 14.931085] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
[ 14.931089] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:LVDS-1]
[ 14.931090] [drm:intel_lvds_detect], [CONNECTOR:9:LVDS-1]
[ 14.931098] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:LVDS-1] probed modes :
[ 14.931099] [drm:drm_mode_debug_printmodeline], Modeline 12:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
[ 14.931103] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
[ 14.931798] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 14.931802] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:VGA-1]
[ 14.931803] [drm:intel_crt_detect], [CONNECTOR:15:VGA-1] force=1
[ 14.931806] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[ 14.931807] [drm:intel_crt_detect], CRT not detected via hotplug
[ 14.932041] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 14.932049] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 14.932052] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 14.932055] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 14.932426] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 14.932427] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 14.932428] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 14.932429] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:VGA-1] disconnected
[ 14.932434] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 14.932435] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:VGA-1]
[ 14.932436] [drm:intel_crt_detect], [CONNECTOR:15:VGA-1] force=1
[ 14.932439] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[ 14.932440] [drm:intel_crt_detect], CRT not detected via hotplug
[ 14.932661] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 14.932668] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 14.932671] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 14.932673] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 14.933049] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 14.933050] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 14.933051] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 14.933052] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:VGA-1] disconnected
[ 14.933081] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
[ 14.933083] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-1]
[ 14.933085] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-1]
[ 14.958629] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[ 14.958645] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-1] probed modes :
[ 14.958647] [drm:drm_mode_debug_printmodeline], Modeline 24:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x48 0x6
[ 14.958651] [drm:drm_mode_debug_printmodeline], Modeline 37:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 14.958654] [drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 14.958656] [drm:drm_mode_debug_printmodeline], Modeline 29:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6
[ 14.958659] [drm:drm_mode_debug_printmodeline], Modeline 28:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
[ 14.958662] [drm:drm_mode_debug_printmodeline], Modeline 27:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[ 14.958665] [drm:drm_mode_debug_printmodeline], Modeline 25:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[ 14.958668] [drm:drm_mode_debug_printmodeline], Modeline 38:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 14.958670] [drm:drm_mode_debug_printmodeline], Modeline 39:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[ 14.958673] [drm:drm_mode_debug_printmodeline], Modeline 40:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 14.958676] [drm:drm_mode_debug_printmodeline], Modeline 41:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[ 14.958679] [drm:drm_mode_debug_printmodeline], Modeline 42:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 14.958681] [drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[ 14.958684] [drm:drm_mode_debug_printmodeline], Modeline 30:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 14.958687] [drm:drm_mode_debug_printmodeline], Modeline 31:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[ 14.958690] [drm:drm_mode_debug_printmodeline], Modeline 32:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 14.958693] [drm:drm_mode_debug_printmodeline], Modeline 33:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[ 14.958695] [drm:drm_mode_debug_printmodeline], Modeline 34:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[ 14.958698] [drm:drm_mode_debug_printmodeline], Modeline 35:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 14.958701] [drm:drm_mode_debug_printmodeline], Modeline 36:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 14.958718] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
[ 14.959315] [drm:drm_mode_getconnector], [CONNECTOR:22:?]
[ 14.959319] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-1]
[ 14.959321] [drm:intel_dp_detect], [CONNECTOR:22:DP-1]
[ 14.961813] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 14.969443] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 14.977438] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 14.982992] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-1] disconnected
[ 14.983001] [drm:drm_mode_getconnector], [CONNECTOR:22:?]
[ 14.983003] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-1]
[ 14.983004] [drm:intel_dp_detect], [CONNECTOR:22:DP-1]
[ 14.985490] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 14.993464] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 15.001477] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 15.006998] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-1] disconnected
[ 15.008250] [drm:drm_mode_addfb], [FB:49]
[ 15.008297] [drm:drm_mode_setcrtc], [CRTC:3]
[ 15.008300] [drm:drm_mode_setcrtc], [CONNECTOR:9:LVDS-1]
[ 15.008302] [drm:intel_crtc_set_config], [CRTC:3] [FB:49] #connectors=1 (x y) (0 0)
[ 15.008304] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
[ 15.008305] [drm:drm_mode_debug_printmodeline], Modeline 44:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
[ 15.008307] [drm:drm_mode_debug_printmodeline], Modeline 50:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
[ 15.008309] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=1, fb_changed=1
[ 15.008311] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:LVDS-1] to [CRTC:3]
[ 15.008312] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-1] to [CRTC:5]
[ 15.008314] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[ 15.008315] [drm:connected_sink_compute_bpp], [CONNECTOR:9:LVDS-1] checking for sink bpp constrains
[ 15.008318] [drm:intel_lvds_compute_config], forcing display bpp (was 24) to LVDS (18)
[ 15.008320] [drm:ironlake_check_fdi_lanes], checking fdi config on pipe A, lanes 1
[ 15.008321] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
[ 15.008322] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
[ 15.008323] [drm:intel_dump_pipe_config], cpu_transcoder: A
[ 15.008324] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
[ 15.008325] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 1, gmch_m: 2528116, gmch_n: 4194304, link_m: 140450, link_n: 524288, tu: 64
[ 15.008327] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 15.008328] [drm:intel_dump_pipe_config], requested mode:
[ 15.008328] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
[ 15.008330] [drm:intel_dump_pipe_config], adjusted mode:
[ 15.008331] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
[ 15.008332] [drm:intel_dump_crtc_timings], crtc timings: 72330 1366 1414 1446 1526 768 770 775 790, type: 0x48 flags: 0xa
[ 15.008334] [drm:intel_dump_pipe_config], port clock: 72330
[ 15.008335] [drm:intel_dump_pipe_config], pipe src size: 1024x768
[ 15.008336] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 15.008337] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00ab0000, size: 0x04000300, enabled
[ 15.008338] [drm:intel_dump_pipe_config], ips: 0
[ 15.008339] [drm:intel_dump_pipe_config], double wide: 0
[ 15.008341] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
[ 15.319423] [drm:intel_disable_shared_dpll], disable PCH DPLL A (active 1, on? 1) for crtc 3
[ 15.319438] [drm:intel_disable_shared_dpll], disabling PCH DPLL A
[ 15.319854] [drm:ivybridge_update_wm], FIFO watermarks For pipe B - plane 8, cursor: 6
[ 15.319858] [drm:ironlake_check_srwm], watermark 1: display plane 21, fbc lines 3, cursor 6
[ 15.319860] [drm:ironlake_check_srwm], watermark 2: display plane 76, fbc lines 3, cursor 6
[ 15.319863] [drm:ironlake_check_srwm], watermark 3: display plane 149, fbc lines 4, cursor 10
[ 15.319865] [drm:ironlake_check_srwm], watermark 3: display plane 295, fbc lines 5, cursor 14
[ 15.319868] [drm:intel_update_fbc], disabled per chip default
[ 15.319875] [drm:ironlake_get_refclk], using SSC reference clock of 120 MHz
[ 15.319901] [drm:intel_get_shared_dpll], CRTC:3 dropping existing PCH DPLL A
[ 15.319903] [drm:intel_get_shared_dpll], CRTC:3 allocated PCH DPLL A
[ 15.319904] [drm:intel_get_shared_dpll], using PCH DPLL A for pipe A
[ 15.319906] [drm:intel_get_shared_dpll], setting up PCH DPLL A
[ 15.322121] [drm:ironlake_update_plane], Writing base 0132D000 00000000 0 0 4096
[ 15.322129] [drm:intel_crtc_mode_set], [ENCODER:10:LVDS-10] set [MODE:0:1024x768]
[ 15.322679] [drm:ivybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6
[ 15.322682] [drm:ivybridge_update_wm], FIFO watermarks For pipe B - plane 8, cursor: 6
[ 15.383437] [drm:ironlake_wait_for_vblank], vblank wait timed out
[ 15.447561] [drm:ironlake_wait_for_vblank], vblank wait timed out
[ 15.447725] [drm:ivb_manual_fdi_link_train], FDI_RX_IIR before link train 0x0
[ 15.447734] [drm:ivb_manual_fdi_link_train], FDI_RX_IIR 0x100
[ 15.447738] [drm:ivb_manual_fdi_link_train], FDI train 1 done, level 0.
[ 15.447747] [drm:ivb_manual_fdi_link_train], FDI_RX_IIR 0x600
[ 15.447750] [drm:ivb_manual_fdi_link_train], FDI train 2 done, level 0.
[ 15.447751] [drm:ivb_manual_fdi_link_train], FDI train done.
[ 15.447755] [drm:ironlake_enable_shared_dpll], enable PCH DPLL A (active 0, on? 0)for crtc 3
[ 15.447758] [drm:ironlake_enable_shared_dpll], enabling PCH DPLL A
[ 15.449127] [drm:intel_update_fbc], more than one pipe active, disabling compression
[ 15.775936] [drm:intel_panel_enable_backlight], pipe A
[ 15.775945] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4882
[ 15.791968] [drm:intel_connector_check_state], [CONNECTOR:9:LVDS-1]
[ 15.791992] [drm:intel_connector_check_state], [CONNECTOR:18:HDMI-A-1]
[ 15.792000] [drm:check_encoder_state], [ENCODER:10:LVDS-10]
[ 15.792007] [drm:check_encoder_state], [ENCODER:16:DAC-16]
[ 15.792014] [drm:check_encoder_state], [ENCODER:17:TMDS-17]
[ 15.792020] [drm:check_encoder_state], [ENCODER:21:TMDS-21]
[ 15.792025] [drm:check_crtc_state], [CRTC:3]
[ 15.792048] [drm:check_crtc_state], [CRTC:5]
[ 15.792077] [drm:check_crtc_state], [CRTC:7]
[ 15.792079] [drm:check_shared_dpll_state], PCH DPLL A
[ 15.792094] [drm:check_shared_dpll_state], PCH DPLL B
[ 15.792178] [drm:drm_mode_setcrtc], [CRTC:5]
[ 15.792184] [drm:drm_mode_setcrtc], [CONNECTOR:18:HDMI-A-1]
[ 15.792187] [drm:intel_crtc_set_config], [CRTC:5] [FB:49] #connectors=1 (x y) (0 0)
[ 15.792190] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
[ 15.792192] [drm:drm_mode_debug_printmodeline], Modeline 45:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x48 0x6
[ 15.792196] [drm:drm_mode_debug_printmodeline], Modeline 50:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
[ 15.792199] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=1, fb_changed=1
[ 15.792201] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:LVDS-1] to [CRTC:3]
[ 15.792204] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-1] to [CRTC:5]
[ 15.792207] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
[ 15.792210] [drm:connected_sink_compute_bpp], [CONNECTOR:18:HDMI-A-1] checking for sink bpp constrains
[ 15.792212] [drm:intel_hdmi_compute_config], picking bpc to 8 for HDMI output
[ 15.792214] [drm:intel_hdmi_compute_config], forcing pipe bpc to 24 for HDMI
[ 15.792216] [drm:ironlake_check_fdi_lanes], checking fdi config on pipe B, lanes 1
[ 15.792218] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
[ 15.792220] [drm:intel_dump_pipe_config], [CRTC:5][modeset] config for pipe B
[ 15.792222] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 15.792223] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[ 15.792225] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 1, gmch_m: 3029219, gmch_n: 4194304, link_m: 126217, link_n: 524288, tu: 64
[ 15.792228] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 15.792230] [drm:intel_dump_pipe_config], requested mode:
[ 15.792231] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
[ 15.792234] [drm:intel_dump_pipe_config], adjusted mode:
[ 15.792235] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
[ 15.792238] [drm:intel_dump_crtc_timings], crtc timings: 65000 1024 1048 1184 1344 768 771 777 806, type: 0x0 flags: 0xa
[ 15.792241] [drm:intel_dump_pipe_config], port clock: 65000
[ 15.792242] [drm:intel_dump_pipe_config], pipe src size: 1024x768
[ 15.792244] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 15.792246] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 15.792248] [drm:intel_dump_pipe_config], ips: 0
[ 15.792249] [drm:intel_dump_pipe_config], double wide: 0
[ 15.832014] [drm:intel_disable_shared_dpll], disable PCH DPLL B (active 1, on? 1) for crtc 5
[ 15.832027] [drm:intel_disable_shared_dpll], disabling PCH DPLL B
[ 15.832442] [drm:ivybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6
[ 15.832444] [drm:ironlake_check_srwm], watermark 1: display plane 12, fbc lines 3, cursor 6
[ 15.832447] [drm:ironlake_check_srwm], watermark 2: display plane 39, fbc lines 3, cursor 6
[ 15.832449] [drm:ironlake_check_srwm], watermark 3: display plane 66, fbc lines 4, cursor 6
[ 15.832451] [drm:ironlake_check_srwm], watermark 3: display plane 130, fbc lines 5, cursor 10
[ 15.832454] [drm:intel_update_fbc], disabled per chip default
[ 15.832462] [drm:ivb_modeset_global_resources], disabling fdi C rx
[ 15.832480] [drm:intel_get_shared_dpll], CRTC:5 dropping existing PCH DPLL B
[ 15.832482] [drm:intel_get_shared_dpll], CRTC:5 allocated PCH DPLL B
[ 15.832484] [drm:intel_get_shared_dpll], using PCH DPLL B for pipe B
[ 15.832486] [drm:intel_get_shared_dpll], setting up PCH DPLL B
[ 15.832497] [drm:ironlake_update_plane], Writing base 0132D000 00000000 0 0 4096
[ 15.832503] [drm:intel_crtc_mode_set], [ENCODER:17:TMDS-17] set [MODE:0:1024x768]
[ 15.833047] [drm:ivybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6
[ 15.833049] [drm:ivybridge_update_wm], FIFO watermarks For pipe B - plane 5, cursor: 6
[ 15.896070] [drm:ironlake_wait_for_vblank], vblank wait timed out
[ 15.960152] [drm:ironlake_wait_for_vblank], vblank wait timed out
[ 15.960164] [drm:cpt_enable_fdi_bc_bifurcation], enabling fdi C rx
[ 15.960323] [drm:ivb_manual_fdi_link_train], FDI_RX_IIR before link train 0x0
[ 15.960333] [drm:ivb_manual_fdi_link_train], FDI_RX_IIR 0x100
[ 15.960337] [drm:ivb_manual_fdi_link_train], FDI train 1 done, level 0.
[ 15.960346] [drm:ivb_manual_fdi_link_train], FDI_RX_IIR 0x600
[ 15.960349] [drm:ivb_manual_fdi_link_train], FDI train 2 done, level 0.
[ 15.960351] [drm:ivb_manual_fdi_link_train], FDI train done.
[ 15.960355] [drm:ironlake_enable_shared_dpll], enable PCH DPLL B (active 0, on? 0)for crtc 5
[ 15.960357] [drm:ironlake_enable_shared_dpll], enabling PCH DPLL B
[ 15.961727] [drm:intel_update_fbc], more than one pipe active, disabling compression
[ 15.984178] [drm:intel_connector_check_state], [CONNECTOR:9:LVDS-1]
[ 15.984189] [drm:intel_connector_check_state], [CONNECTOR:18:HDMI-A-1]
[ 15.984195] [drm:check_encoder_state], [ENCODER:10:LVDS-10]
[ 15.984200] [drm:check_encoder_state], [ENCODER:16:DAC-16]
[ 15.984204] [drm:check_encoder_state], [ENCODER:17:TMDS-17]
[ 15.984208] [drm:check_encoder_state], [ENCODER:21:TMDS-21]
[ 15.984212] [drm:check_crtc_state], [CRTC:3]
[ 15.984228] [drm:check_crtc_state], [CRTC:5]
[ 15.984241] [drm:check_crtc_state], [CRTC:7]
[ 15.984244] [drm:check_shared_dpll_state], PCH DPLL A
[ 15.984260] [drm:check_shared_dpll_state], PCH DPLL B
[ 16.246286] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
[ 16.246291] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:LVDS-1]
[ 16.246293] [drm:intel_lvds_detect], [CONNECTOR:9:LVDS-1]
[ 16.246302] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:LVDS-1] probed modes :
[ 16.246303] [drm:drm_mode_debug_printmodeline], Modeline 12:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
[ 16.246308] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
[ 16.246477] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 16.246480] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:VGA-1]
[ 16.246481] [drm:intel_crt_detect], [CONNECTOR:15:VGA-1] force=1
[ 16.246485] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[ 16.246486] [drm:intel_crt_detect], CRT not detected via hotplug
[ 16.246641] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 16.246644] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 16.246645] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 16.246647] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 16.247013] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 16.247015] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 16.247016] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 16.247018] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:VGA-1] disconnected
[ 16.247021] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 16.247022] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:VGA-1]
[ 16.247023] [drm:intel_crt_detect], [CONNECTOR:15:VGA-1] force=1
[ 16.247026] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[ 16.247027] [drm:intel_crt_detect], CRT not detected via hotplug
[ 16.247183] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 16.247185] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 16.247186] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 16.247187] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 16.247556] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 16.247557] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 16.247558] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 16.247559] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:VGA-1] disconnected
[ 16.247566] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
[ 16.247567] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-1]
[ 16.247571] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-1]
[ 16.273145] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[ 16.273157] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-1] probed modes :
[ 16.273159] [drm:drm_mode_debug_printmodeline], Modeline 24:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x48 0x6
[ 16.273162] [drm:drm_mode_debug_printmodeline], Modeline 37:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 16.273164] [drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 16.273166] [drm:drm_mode_debug_printmodeline], Modeline 29:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6
[ 16.273169] [drm:drm_mode_debug_printmodeline], Modeline 28:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
[ 16.273172] [drm:drm_mode_debug_printmodeline], Modeline 27:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[ 16.273175] [drm:drm_mode_debug_printmodeline], Modeline 25:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[ 16.273178] [drm:drm_mode_debug_printmodeline], Modeline 38:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 16.273182] [drm:drm_mode_debug_printmodeline], Modeline 39:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[ 16.273185] [drm:drm_mode_debug_printmodeline], Modeline 40:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 16.273188] [drm:drm_mode_debug_printmodeline], Modeline 41:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[ 16.273190] [drm:drm_mode_debug_printmodeline], Modeline 42:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 16.273192] [drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[ 16.273194] [drm:drm_mode_debug_printmodeline], Modeline 30:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 16.273196] [drm:drm_mode_debug_printmodeline], Modeline 31:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[ 16.273198] [drm:drm_mode_debug_printmodeline], Modeline 32:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 16.273200] [drm:drm_mode_debug_printmodeline], Modeline 33:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[ 16.273202] [drm:drm_mode_debug_printmodeline], Modeline 34:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[ 16.273204] [drm:drm_mode_debug_printmodeline], Modeline 35:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 16.273206] [drm:drm_mode_debug_printmodeline], Modeline 36:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 16.273222] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
[ 16.273259] [drm:drm_mode_getconnector], [CONNECTOR:22:?]
[ 16.273261] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-1]
[ 16.273262] [drm:intel_dp_detect], [CONNECTOR:22:DP-1]
[ 16.275744] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 16.282968] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 16.290944] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 16.296476] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-1] disconnected
[ 16.296491] [drm:drm_mode_getconnector], [CONNECTOR:22:?]
[ 16.296502] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-1]
[ 16.296504] [drm:intel_dp_detect], [CONNECTOR:22:DP-1]
[ 16.298979] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 16.307014] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 16.314962] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 16.320495] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-1] disconnected
[ 16.324607] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
[ 16.324610] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:LVDS-1]
[ 16.324612] [drm:intel_lvds_detect], [CONNECTOR:9:LVDS-1]
[ 16.324620] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:LVDS-1] probed modes :
[ 16.324621] [drm:drm_mode_debug_printmodeline], Modeline 12:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
[ 16.324625] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
[ 16.324764] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 16.324766] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:VGA-1]
[ 16.324767] [drm:intel_crt_detect], [CONNECTOR:15:VGA-1] force=1
[ 16.324771] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[ 16.324772] [drm:intel_crt_detect], CRT not detected via hotplug
[ 16.324944] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 16.324949] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 16.324952] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 16.324954] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 16.325330] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 16.325331] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 16.325332] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 16.325333] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:VGA-1] disconnected
[ 16.325336] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 16.325338] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:VGA-1]
[ 16.325339] [drm:intel_crt_detect], [CONNECTOR:15:VGA-1] force=1
[ 16.325341] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[ 16.325343] [drm:intel_crt_detect], CRT not detected via hotplug
[ 16.325504] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 16.325507] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 16.325509] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 16.325511] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 16.325889] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 16.325890] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 16.325891] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 16.325893] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:VGA-1] disconnected
[ 16.325900] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
[ 16.325901] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-1]
[ 16.325904] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-1]
[ 16.351532] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[ 16.351550] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-1] probed modes :
[ 16.351553] [drm:drm_mode_debug_printmodeline], Modeline 24:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x48 0x6
[ 16.351556] [drm:drm_mode_debug_printmodeline], Modeline 37:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 16.351559] [drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 16.351562] [drm:drm_mode_debug_printmodeline], Modeline 29:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6
[ 16.351565] [drm:drm_mode_debug_printmodeline], Modeline 28:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
[ 16.351567] [drm:drm_mode_debug_printmodeline], Modeline 27:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[ 16.351570] [drm:drm_mode_debug_printmodeline], Modeline 25:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[ 16.351573] [drm:drm_mode_debug_printmodeline], Modeline 38:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 16.351576] [drm:drm_mode_debug_printmodeline], Modeline 39:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[ 16.351578] [drm:drm_mode_debug_printmodeline], Modeline 40:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 16.351581] [drm:drm_mode_debug_printmodeline], Modeline 41:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[ 16.351584] [drm:drm_mode_debug_printmodeline], Modeline 42:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 16.351586] [drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[ 16.351589] [drm:drm_mode_debug_printmodeline], Modeline 30:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 16.351592] [drm:drm_mode_debug_printmodeline], Modeline 31:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[ 16.351594] [drm:drm_mode_debug_printmodeline], Modeline 32:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 16.351597] [drm:drm_mode_debug_printmodeline], Modeline 33:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[ 16.351600] [drm:drm_mode_debug_printmodeline], Modeline 34:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[ 16.351602] [drm:drm_mode_debug_printmodeline], Modeline 35:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 16.351605] [drm:drm_mode_debug_printmodeline], Modeline 36:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 16.351636] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
[ 16.351695] [drm:drm_mode_getconnector], [CONNECTOR:22:?]
[ 16.351698] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-1]
[ 16.351700] [drm:intel_dp_detect], [CONNECTOR:22:DP-1]
[ 16.354182] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 16.367022] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 16.375013] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 16.380569] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-1] disconnected
[ 16.380580] [drm:drm_mode_getconnector], [CONNECTOR:22:?]
[ 16.380582] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-1]
[ 16.380583] [drm:intel_dp_detect], [CONNECTOR:22:DP-1]
[ 16.383065] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 16.385353] r8169 0000:02:00.0 eth0: link up
[ 16.385360] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 16.391055] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 16.399077] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 16.404616] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-1] disconnected
[ 16.405196] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
[ 16.713037] [drm:intel_disable_shared_dpll], disable PCH DPLL A (active 1, on? 1) for crtc 3
[ 16.713049] [drm:intel_disable_shared_dpll], disabling PCH DPLL A
[ 16.713460] [drm:ivybridge_update_wm], FIFO watermarks For pipe B - plane 5, cursor: 6
[ 16.713463] [drm:ironlake_check_srwm], watermark 1: display plane 11, fbc lines 3, cursor 6
[ 16.713466] [drm:ironlake_check_srwm], watermark 2: display plane 35, fbc lines 3, cursor 6
[ 16.713468] [drm:ironlake_check_srwm], watermark 3: display plane 66, fbc lines 4, cursor 6
[ 16.713470] [drm:ironlake_check_srwm], watermark 3: display plane 130, fbc lines 5, cursor 10
[ 16.713473] [drm:intel_update_fbc], disabled per chip default
[ 16.713482] [drm:intel_connector_check_state], [CONNECTOR:18:HDMI-A-1]
[ 16.713487] [drm:check_encoder_state], [ENCODER:10:LVDS-10]
[ 16.713491] [drm:check_encoder_state], [ENCODER:16:DAC-16]
[ 16.713495] [drm:check_encoder_state], [ENCODER:17:TMDS-17]
[ 16.713498] [drm:check_encoder_state], [ENCODER:21:TMDS-21]
[ 16.713502] [drm:check_crtc_state], [CRTC:3]
[ 16.713506] [drm:check_crtc_state], [CRTC:5]
[ 16.713521] [drm:check_crtc_state], [CRTC:7]
[ 16.713523] [drm:check_shared_dpll_state], PCH DPLL A
[ 16.713528] [drm:check_shared_dpll_state], PCH DPLL B
[ 16.716138] [drm:drm_mode_addfb], [FB:47]
[ 16.716194] [drm:drm_mode_setcrtc], [CRTC:5]
[ 16.716201] [drm:drm_mode_setcrtc], [CONNECTOR:18:HDMI-A-1]
[ 16.716204] [drm:intel_crtc_set_config], [CRTC:5] [FB:47] #connectors=1 (x y) (0 0)
[ 16.716209] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=1
[ 16.716212] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:LVDS-1] to [CRTC:3]
[ 16.716214] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-1] to [CRTC:5]
[ 16.723220] [drm:ironlake_update_plane], Writing base 01631000 00000000 0 0 7168
[ 16.737075] [drm:intel_crtc_set_config], [CRTC:3] [NOFB]
[ 16.737082] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=1, fb_changed=0
[ 16.737085] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:LVDS-1] to [NOCRTC]
[ 16.737087] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
[ 16.737089] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-1] to [CRTC:5]
[ 16.737091] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
[ 16.737094] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 1
[ 16.737106] [drm:intel_connector_check_state], [CONNECTOR:18:HDMI-A-1]
[ 16.737111] [drm:check_encoder_state], [ENCODER:10:LVDS-10]
[ 16.737114] [drm:check_encoder_state], [ENCODER:16:DAC-16]
[ 16.737118] [drm:check_encoder_state], [ENCODER:17:TMDS-17]
[ 16.737121] [drm:check_encoder_state], [ENCODER:21:TMDS-21]
[ 16.737125] [drm:check_crtc_state], [CRTC:3]
[ 16.737127] [drm:check_crtc_state], [CRTC:5]
[ 16.737142] [drm:check_crtc_state], [CRTC:7]
[ 16.737143] [drm:check_shared_dpll_state], PCH DPLL A
[ 16.737149] [drm:check_shared_dpll_state], PCH DPLL B
[ 16.737823] [drm:drm_mode_setcrtc], [CRTC:5]
[ 16.737832] [drm:drm_mode_setcrtc], [CONNECTOR:18:HDMI-A-1]
[ 16.737834] [drm:intel_crtc_set_config], [CRTC:5] [FB:47] #connectors=1 (x y) (0 0)
[ 16.737838] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
[ 16.737840] [drm:drm_mode_debug_printmodeline], Modeline 50:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
[ 16.737843] [drm:drm_mode_debug_printmodeline], Modeline 48:"" 0 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x0 0x6
[ 16.737846] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=1, fb_changed=0
[ 16.737849] [drm:intel_modeset_stage_output_state], [CONNECTOR:18:HDMI-A-1] to [CRTC:5]
[ 16.737852] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
[ 16.737855] [drm:connected_sink_compute_bpp], [CONNECTOR:18:HDMI-A-1] checking for sink bpp constrains
[ 16.737858] [drm:intel_hdmi_compute_config], picking bpc to 8 for HDMI output
[ 16.737859] [drm:intel_hdmi_compute_config], forcing pipe bpc to 24 for HDMI
[ 16.737862] [drm:ironlake_check_fdi_lanes], checking fdi config on pipe B, lanes 2
[ 16.737864] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
[ 16.737866] [drm:intel_dump_pipe_config], [CRTC:5][modeset] config for pipe B
[ 16.737868] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 16.737869] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[ 16.737871] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 2, gmch_m: 6815744, gmch_n: 8388608, link_m: 283989, link_n: 524288, tu: 64
[ 16.737873] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 16.737876] [drm:intel_dump_pipe_config], requested mode:
[ 16.737877] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x0 0x6
[ 16.737880] [drm:intel_dump_pipe_config], adjusted mode:
[ 16.737881] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x0 0x6
[ 16.737884] [drm:intel_dump_crtc_timings], crtc timings: 146250 1680 1784 1960 2240 1050 1053 1059 1089, type: 0x0 flags: 0x6
[ 16.737887] [drm:intel_dump_pipe_config], port clock: 146250
[ 16.737889] [drm:intel_dump_pipe_config], pipe src size: 1680x1050
[ 16.737890] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 16.737892] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 16.737894] [drm:intel_dump_pipe_config], ips: 0
[ 16.737896] [drm:intel_dump_pipe_config], double wide: 0
[ 16.785115] [drm:intel_disable_shared_dpll], disable PCH DPLL B (active 1, on? 1) for crtc 5
[ 16.785125] [drm:intel_disable_shared_dpll], disabling PCH DPLL B
[ 16.785536] [drm:intel_update_fbc], no output, disabling
[ 16.785545] [drm:ivb_modeset_global_resources], disabling fdi C rx
[ 16.785577] [drm:intel_get_shared_dpll], CRTC:5 dropping existing PCH DPLL B
[ 16.785580] [drm:intel_get_shared_dpll], CRTC:5 allocated PCH DPLL A
[ 16.785581] [drm:intel_get_shared_dpll], using PCH DPLL A for pipe B
[ 16.785583] [drm:intel_get_shared_dpll], setting up PCH DPLL A
[ 16.785595] [drm:ironlake_update_plane], Writing base 01631000 00000000 0 0 7168
[ 16.785601] [drm:intel_crtc_mode_set], [ENCODER:17:TMDS-17] set [MODE:0:]
[ 16.786147] [drm:ivybridge_update_wm], FIFO watermarks For pipe B - plane 8, cursor: 6
[ 16.786150] [drm:ironlake_check_srwm], watermark 1: display plane 21, fbc lines 3, cursor 6
[ 16.786152] [drm:ironlake_check_srwm], watermark 2: display plane 76, fbc lines 3, cursor 6
[ 16.786155] [drm:ironlake_check_srwm], watermark 3: display plane 149, fbc lines 4, cursor 10
[ 16.786157] [drm:ironlake_check_srwm], watermark 3: display plane 295, fbc lines 5, cursor 14
[ 16.849185] [drm:ironlake_wait_for_vblank], vblank wait timed out
[ 16.913227] [drm:ironlake_wait_for_vblank], vblank wait timed out
[ 16.913240] [drm:cpt_enable_fdi_bc_bifurcation], enabling fdi C rx
[ 16.913398] [drm:ivb_manual_fdi_link_train], FDI_RX_IIR before link train 0x0
[ 16.913409] [drm:ivb_manual_fdi_link_train], FDI_RX_IIR 0x100
[ 16.913412] [drm:ivb_manual_fdi_link_train], FDI train 1 done, level 0.
[ 16.913422] [drm:ivb_manual_fdi_link_train], FDI_RX_IIR 0x600
[ 16.913425] [drm:ivb_manual_fdi_link_train], FDI train 2 done, level 0.
[ 16.913427] [drm:ivb_manual_fdi_link_train], FDI train done.
[ 16.913431] [drm:ironlake_enable_shared_dpll], enable PCH DPLL A (active 0, on? 0)for crtc 5
[ 16.913434] [drm:ironlake_enable_shared_dpll], enabling PCH DPLL A
[ 16.914804] [drm:intel_update_fbc], disabled per chip default
[ 16.937272] [drm:intel_connector_check_state], [CONNECTOR:18:HDMI-A-1]
[ 16.937282] [drm:check_encoder_state], [ENCODER:10:LVDS-10]
[ 16.937286] [drm:check_encoder_state], [ENCODER:16:DAC-16]
[ 16.937289] [drm:check_encoder_state], [ENCODER:17:TMDS-17]
[ 16.937293] [drm:check_encoder_state], [ENCODER:21:TMDS-21]
[ 16.937296] [drm:check_crtc_state], [CRTC:3]
[ 16.937299] [drm:check_crtc_state], [CRTC:5]
[ 16.937315] [drm:check_crtc_state], [CRTC:7]
[ 16.937318] [drm:check_shared_dpll_state], PCH DPLL A
[ 16.937324] [drm:check_shared_dpll_state], PCH DPLL B
[ 19.021808] [drm:intel_dp_detect], [CONNECTOR:22:DP-1]
[ 19.024285] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 19.034079] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 19.042078] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 19.047664] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-1]
[ 19.060478] [drm:intel_lvds_detect], [CONNECTOR:9:LVDS-1]
[ 19.060492] [drm:intel_crt_detect], [CONNECTOR:15:VGA-1] force=1
[ 19.060495] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[ 19.060497] [drm:intel_crt_detect], CRT not detected via hotplug
[ 19.060674] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 19.060676] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 19.060678] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 19.060679] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 19.061045] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 19.061046] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 19.061047] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 26.170781] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
[ 26.170787] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:LVDS-1]
[ 26.170789] [drm:intel_lvds_detect], [CONNECTOR:9:LVDS-1]
[ 26.170798] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:LVDS-1] probed modes :
[ 26.170800] [drm:drm_mode_debug_printmodeline], Modeline 12:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
[ 26.170805] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
[ 26.171007] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 26.171009] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:VGA-1]
[ 26.171011] [drm:intel_crt_detect], [CONNECTOR:15:VGA-1] force=1
[ 26.171015] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[ 26.171017] [drm:intel_crt_detect], CRT not detected via hotplug
[ 26.171177] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 26.171180] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 26.171182] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 26.171183] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 26.171553] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 26.171555] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 26.171556] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 26.171558] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:VGA-1] disconnected
[ 26.171562] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 26.171564] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:VGA-1]
[ 26.171566] [drm:intel_crt_detect], [CONNECTOR:15:VGA-1] force=1
[ 26.171569] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[ 26.171571] [drm:intel_crt_detect], CRT not detected via hotplug
[ 26.171727] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 26.171730] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 26.171732] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 26.171733] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 26.172110] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 26.172112] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 26.172114] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 26.172116] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:VGA-1] disconnected
[ 26.172129] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
[ 26.172131] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-1]
[ 26.172134] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-1]
[ 26.197530] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[ 26.197542] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-1] probed modes :
[ 26.197544] [drm:drm_mode_debug_printmodeline], Modeline 24:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x48 0x6
[ 26.197546] [drm:drm_mode_debug_printmodeline], Modeline 37:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 26.197547] [drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 26.197549] [drm:drm_mode_debug_printmodeline], Modeline 29:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6
[ 26.197551] [drm:drm_mode_debug_printmodeline], Modeline 28:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
[ 26.197553] [drm:drm_mode_debug_printmodeline], Modeline 27:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[ 26.197554] [drm:drm_mode_debug_printmodeline], Modeline 25:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[ 26.197556] [drm:drm_mode_debug_printmodeline], Modeline 38:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 26.197558] [drm:drm_mode_debug_printmodeline], Modeline 39:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[ 26.197559] [drm:drm_mode_debug_printmodeline], Modeline 40:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 26.197561] [drm:drm_mode_debug_printmodeline], Modeline 41:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[ 26.197563] [drm:drm_mode_debug_printmodeline], Modeline 42:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 26.197564] [drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[ 26.197566] [drm:drm_mode_debug_printmodeline], Modeline 30:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 26.197568] [drm:drm_mode_debug_printmodeline], Modeline 31:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[ 26.197569] [drm:drm_mode_debug_printmodeline], Modeline 32:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 26.197571] [drm:drm_mode_debug_printmodeline], Modeline 33:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[ 26.197572] [drm:drm_mode_debug_printmodeline], Modeline 34:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[ 26.197574] [drm:drm_mode_debug_printmodeline], Modeline 35:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 26.197576] [drm:drm_mode_debug_printmodeline], Modeline 36:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 26.197602] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
[ 26.197641] [drm:drm_mode_getconnector], [CONNECTOR:22:?]
[ 26.197643] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-1]
[ 26.197645] [drm:intel_dp_detect], [CONNECTOR:22:DP-1]
[ 26.200132] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 26.210271] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 26.222303] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 26.227815] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-1] disconnected
[ 26.227830] [drm:drm_mode_getconnector], [CONNECTOR:22:?]
[ 26.227833] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-1]
[ 26.227834] [drm:intel_dp_detect], [CONNECTOR:22:DP-1]
[ 26.230311] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 26.238313] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 26.246324] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 26.251856] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-1] disconnected
[ 26.513423] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
[ 26.513429] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:LVDS-1]
[ 26.513431] [drm:intel_lvds_detect], [CONNECTOR:9:LVDS-1]
[ 26.513440] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:LVDS-1] probed modes :
[ 26.513442] [drm:drm_mode_debug_printmodeline], Modeline 12:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
[ 26.513447] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
[ 26.513580] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 26.513583] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:VGA-1]
[ 26.513585] [drm:intel_crt_detect], [CONNECTOR:15:VGA-1] force=1
[ 26.513588] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[ 26.513590] [drm:intel_crt_detect], CRT not detected via hotplug
[ 26.513744] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 26.513748] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 26.513750] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 26.513751] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 26.514118] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 26.514120] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 26.514122] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 26.514124] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:VGA-1] disconnected
[ 26.514130] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 26.514131] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:VGA-1]
[ 26.514133] [drm:intel_crt_detect], [CONNECTOR:15:VGA-1] force=1
[ 26.514136] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[ 26.514138] [drm:intel_crt_detect], CRT not detected via hotplug
[ 26.514294] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 26.514297] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 26.514298] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 26.514300] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 26.514669] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 26.514671] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 26.514672] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 26.514674] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:VGA-1] disconnected
[ 26.514691] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
[ 26.514694] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-1]
[ 26.514696] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-1]
[ 26.540206] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[ 26.540223] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-1] probed modes :
[ 26.540225] [drm:drm_mode_debug_printmodeline], Modeline 24:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x48 0x6
[ 26.540229] [drm:drm_mode_debug_printmodeline], Modeline 37:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 26.540232] [drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 26.540235] [drm:drm_mode_debug_printmodeline], Modeline 29:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6
[ 26.540237] [drm:drm_mode_debug_printmodeline], Modeline 28:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
[ 26.540240] [drm:drm_mode_debug_printmodeline], Modeline 27:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[ 26.540243] [drm:drm_mode_debug_printmodeline], Modeline 25:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[ 26.540246] [drm:drm_mode_debug_printmodeline], Modeline 38:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 26.540249] [drm:drm_mode_debug_printmodeline], Modeline 39:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[ 26.540252] [drm:drm_mode_debug_printmodeline], Modeline 40:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 26.540254] [drm:drm_mode_debug_printmodeline], Modeline 41:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[ 26.540257] [drm:drm_mode_debug_printmodeline], Modeline 42:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 26.540260] [drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[ 26.540262] [drm:drm_mode_debug_printmodeline], Modeline 30:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 26.540265] [drm:drm_mode_debug_printmodeline], Modeline 31:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[ 26.540268] [drm:drm_mode_debug_printmodeline], Modeline 32:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 26.540271] [drm:drm_mode_debug_printmodeline], Modeline 33:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[ 26.540273] [drm:drm_mode_debug_printmodeline], Modeline 34:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[ 26.540276] [drm:drm_mode_debug_printmodeline], Modeline 35:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 26.540279] [drm:drm_mode_debug_printmodeline], Modeline 36:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 26.540309] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
[ 26.540669] [drm:drm_mode_getconnector], [CONNECTOR:22:?]
[ 26.540673] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-1]
[ 26.540675] [drm:intel_dp_detect], [CONNECTOR:22:DP-1]
[ 26.543156] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 26.550666] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 26.558663] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 26.564200] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-1] disconnected
[ 26.564217] [drm:drm_mode_getconnector], [CONNECTOR:22:?]
[ 26.564219] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-1]
[ 26.564221] [drm:intel_dp_detect], [CONNECTOR:22:DP-1]
[ 26.566702] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 26.574680] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 26.582702] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 26.588239] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-1] disconnected
[ 26.600286] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
[ 26.600291] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:LVDS-1]
[ 26.600293] [drm:intel_lvds_detect], [CONNECTOR:9:LVDS-1]
[ 26.600304] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:LVDS-1] probed modes :
[ 26.600306] [drm:drm_mode_debug_printmodeline], Modeline 12:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
[ 26.600311] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
[ 26.600444] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 26.600447] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:VGA-1]
[ 26.600449] [drm:intel_crt_detect], [CONNECTOR:15:VGA-1] force=1
[ 26.600453] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[ 26.600455] [drm:intel_crt_detect], CRT not detected via hotplug
[ 26.600740] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 26.600744] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 26.600746] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 26.600747] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 26.601113] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 26.601115] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 26.601117] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 26.601119] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:VGA-1] disconnected
[ 26.601125] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 26.601127] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:VGA-1]
[ 26.601129] [drm:intel_crt_detect], [CONNECTOR:15:VGA-1] force=1
[ 26.601133] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[ 26.601134] [drm:intel_crt_detect], CRT not detected via hotplug
[ 26.601296] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 26.601300] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 26.601302] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 26.601303] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 26.601673] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 26.601675] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 26.601677] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 26.601679] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:VGA-1] disconnected
[ 26.601695] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
[ 26.601698] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-1]
[ 26.601700] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-1]
[ 26.634597] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[ 26.634613] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-1] probed modes :
[ 26.634615] [drm:drm_mode_debug_printmodeline], Modeline 24:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x48 0x6
[ 26.634618] [drm:drm_mode_debug_printmodeline], Modeline 37:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 26.634621] [drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 26.634623] [drm:drm_mode_debug_printmodeline], Modeline 29:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6
[ 26.634626] [drm:drm_mode_debug_printmodeline], Modeline 28:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
[ 26.634629] [drm:drm_mode_debug_printmodeline], Modeline 27:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[ 26.634632] [drm:drm_mode_debug_printmodeline], Modeline 25:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[ 26.634634] [drm:drm_mode_debug_printmodeline], Modeline 38:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 26.634637] [drm:drm_mode_debug_printmodeline], Modeline 39:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[ 26.634640] [drm:drm_mode_debug_printmodeline], Modeline 40:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 26.634642] [drm:drm_mode_debug_printmodeline], Modeline 41:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[ 26.634645] [drm:drm_mode_debug_printmodeline], Modeline 42:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 26.634648] [drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[ 26.634650] [drm:drm_mode_debug_printmodeline], Modeline 30:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 26.634653] [drm:drm_mode_debug_printmodeline], Modeline 31:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[ 26.634656] [drm:drm_mode_debug_printmodeline], Modeline 32:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 26.634658] [drm:drm_mode_debug_printmodeline], Modeline 33:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[ 26.634661] [drm:drm_mode_debug_printmodeline], Modeline 34:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[ 26.634664] [drm:drm_mode_debug_printmodeline], Modeline 35:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 26.634666] [drm:drm_mode_debug_printmodeline], Modeline 36:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 26.634693] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
[ 26.635024] [drm:drm_mode_getconnector], [CONNECTOR:22:?]
[ 26.635027] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-1]
[ 26.635029] [drm:intel_dp_detect], [CONNECTOR:22:DP-1]
[ 26.637534] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 26.646773] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 26.654763] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 26.660312] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-1] disconnected
[ 26.660330] [drm:drm_mode_getconnector], [CONNECTOR:22:?]
[ 26.660333] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-1]
[ 26.660335] [drm:intel_dp_detect], [CONNECTOR:22:DP-1]
[ 26.662812] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 26.670815] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 26.678793] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[ 26.684330] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-1] disconnected
[ 36.046588] [drm:intel_crtc_cursor_set], cursor off
[ 36.929973] [drm:intel_crtc_cursor_set], cursor off
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [V13-prerc]: REGRESSION: "*ERROR* Timed out waiting for forcewake old ack to clear"
2013-11-16 14:39 ` Jörg Otte
@ 2013-11-16 14:58 ` Daniel Vetter
0 siblings, 0 replies; 4+ messages in thread
From: Daniel Vetter @ 2013-11-16 14:58 UTC (permalink / raw)
To: Jörg Otte
Cc: intel-gfx, dri-devel, Linux Kernel Mailing List, Chris Wilson,
Mika Kuoppala, Ben Widawsky, Linus Torvalds
On Sat, Nov 16, 2013 at 3:39 PM, Jörg Otte <jrg.otte@gmail.com> wrote:
> 2013/11/16 Daniel Vetter <daniel.vetter@ffwll.ch>:
>> On Sat, Nov 16, 2013 at 12:28 PM, Jörg Otte <jrg.otte@gmail.com> wrote:
>>> On startup I get the following error display on the console:
>>> "*ERROR* Timed out waiting for forcewake old ack to clear"
>>>
>>> I already reported this error a year ago at the time of v3.7
>>> ( see https://lkml.org/lkml/2012/11/27/355)
>>> which was fixed later on.
>>>
>>> Now this error is back again. Kernel 3.12.0-09888-gf63c48
>>
>> Please boot with drm.debug=0xe, reproduce the issue and then attach
>> the complete dmesg (including all the boot message, so if it takes a
>> while to reproduce please grab an boot dmesg, too).
>>
>> Also adding the right mailing lists, see MAINTAINERS.
>>
>> Thanks, Daniel
>> --
>> Daniel Vetter
>> Software Engineer, Intel Corporation
>> +41 (0) 79 365 57 48 - http://blog.ffwll.ch
>
> Thanks, Jörg
Yeah, we've broken the early uncore sanitize stuff again :( I'll send
out a patch asap.
-Daniel
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2013-11-16 14:58 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-11-16 11:28 [V13-prerc]: REGRESSION: "*ERROR* Timed out waiting for forcewake old ack to clear" Jörg Otte
2013-11-16 11:59 ` Daniel Vetter
2013-11-16 14:39 ` Jörg Otte
2013-11-16 14:58 ` Daniel Vetter
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).