linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2 1/2] mtd: Add flag to indicate panic_write
@ 2019-05-16 15:45 Kamal Dasu
  2019-05-16 15:45 ` [PATCH v2 2/2] mtd: nand: raw: brcmnand: When oops in progress use pio and interrupt polling Kamal Dasu
  0 siblings, 1 reply; 3+ messages in thread
From: Kamal Dasu @ 2019-05-16 15:45 UTC (permalink / raw)
  To: linux-mtd
  Cc: bcm-kernel-feedback-list, linux-kernel, Kamal Dasu,
	David Woodhouse, Brian Norris, Marek Vasut, Miquel Raynal,
	Richard Weinberger, Vignesh Raghavendra

Added a flag to indicate a panic_write so that low level drivers can
use it to take required action where applicable, to ensure oops data
gets written to assigned mtd device.

Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
---
 drivers/mtd/mtdcore.c                    |  3 ++
 drivers/mtd/nand/raw/brcmnand/brcmnand.c | 49 ++++++++++++++++++++++++++++++--
 include/linux/mtd/mtd.h                  |  6 ++++
 3 files changed, 55 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index 76b4264..a83decd 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -1138,6 +1138,9 @@ int mtd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen,
 		return -EROFS;
 	if (!len)
 		return 0;
+	if (!mtd->oops_panic_write)
+		mtd->oops_panic_write = true;
+
 	return mtd->_panic_write(mtd, to, len, retlen, buf);
 }
 EXPORT_SYMBOL_GPL(mtd_panic_write);
diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
index ce0b8ff..a30a7f0 100644
--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
@@ -159,6 +159,7 @@ struct brcmnand_controller {
 	u32			nand_cs_nand_xor;
 	u32			corr_stat_threshold;
 	u32			flash_dma_mode;
+	bool			pio_poll_mode;
 };
 
 struct brcmnand_cfg {
@@ -823,6 +824,21 @@ static inline bool has_flash_dma(struct brcmnand_controller *ctrl)
 	return ctrl->flash_dma_base;
 }
 
+static inline void disable_ctrl_irqs(struct brcmnand_controller *ctrl)
+{
+	if (ctrl->pio_poll_mode)
+		return;
+
+	if (has_flash_dma(ctrl)) {
+		ctrl->flash_dma_base = 0;
+		disable_irq(ctrl->dma_irq);
+	}
+
+	disable_irq(ctrl->irq);
+
+	ctrl->pio_poll_mode = true;
+}
+
 static inline bool flash_dma_buf_ok(const void *buf)
 {
 	return buf && !is_vmalloc_addr(buf) &&
@@ -1237,15 +1253,42 @@ static void brcmnand_cmd_ctrl(struct nand_chip *chip, int dat,
 	/* intentionally left blank */
 }
 
+static bool brcmstb_nand_wait_for_completion(struct nand_chip *chip)
+{
+	struct brcmnand_host *host = nand_get_controller_data(chip);
+	struct brcmnand_controller *ctrl = host->ctrl;
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	bool err = false;
+	int sts;
+
+	if (mtd->oops_panic_write) {
+		/* switch to interrupt polling and PIO mode */
+		disable_ctrl_irqs(ctrl);
+		sts = bcmnand_ctrl_poll_status(ctrl, NAND_CTRL_RDY,
+					       NAND_CTRL_RDY, 0);
+		err = (sts < 0) ? true : false;
+	} else {
+		unsigned long timeo = msecs_to_jiffies(
+						NAND_POLL_STATUS_TIMEOUT_MS);
+		/* wait for completion interrupt */
+		sts = wait_for_completion_timeout(&ctrl->done, timeo);
+		err = (sts <= 0) ? true : false;
+	}
+
+	return err;
+}
+
 static int brcmnand_waitfunc(struct nand_chip *chip)
 {
 	struct brcmnand_host *host = nand_get_controller_data(chip);
 	struct brcmnand_controller *ctrl = host->ctrl;
-	unsigned long timeo = msecs_to_jiffies(100);
+	bool err = false;
 
 	dev_dbg(ctrl->dev, "wait on native cmd %d\n", ctrl->cmd_pending);
-	if (ctrl->cmd_pending &&
-			wait_for_completion_timeout(&ctrl->done, timeo) <= 0) {
+	if (ctrl->cmd_pending)
+		err = brcmstb_nand_wait_for_completion(chip);
+
+	if (err) {
 		u32 cmd = brcmnand_read_reg(ctrl, BRCMNAND_CMD_START)
 					>> brcmnand_cmd_shift(ctrl);
 
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 677768b..791c34d 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -330,6 +330,12 @@ struct mtd_info {
 	int (*_get_device) (struct mtd_info *mtd);
 	void (*_put_device) (struct mtd_info *mtd);
 
+	/*
+	 * flag indicates a panic write, low level drivers can take appropriate
+	 * action if required to ensure writes go through
+	 */
+	bool oops_panic_write;
+
 	struct notifier_block reboot_notifier;  /* default mode before reboot */
 
 	/* ECC status information */
-- 
1.9.0.138.g2de3478


^ permalink raw reply related	[flat|nested] 3+ messages in thread

* [PATCH v2 2/2] mtd: nand: raw: brcmnand: When oops in progress use pio and interrupt polling
  2019-05-16 15:45 [PATCH v2 1/2] mtd: Add flag to indicate panic_write Kamal Dasu
@ 2019-05-16 15:45 ` Kamal Dasu
  2019-05-16 16:14   ` Kamal Dasu
  0 siblings, 1 reply; 3+ messages in thread
From: Kamal Dasu @ 2019-05-16 15:45 UTC (permalink / raw)
  To: linux-mtd
  Cc: bcm-kernel-feedback-list, linux-kernel, Kamal Dasu, Brian Norris,
	Miquel Raynal, Richard Weinberger, David Woodhouse, Marek Vasut,
	Vignesh Raghavendra

If mtd_oops is in progress switch to polling for nand command completion
interrupts and use PIO mode wihtout DMA so that the mtd_oops buffer can
be completely written in the assinged nand partition.

Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
---
 drivers/mtd/nand/raw/brcmnand/brcmnand.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
index a30a7f0..dca8eb8 100644
--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
@@ -835,7 +835,6 @@ static inline void disable_ctrl_irqs(struct brcmnand_controller *ctrl)
 	}
 
 	disable_irq(ctrl->irq);
-
 	ctrl->pio_poll_mode = true;
 }
 
-- 
1.9.0.138.g2de3478


^ permalink raw reply related	[flat|nested] 3+ messages in thread

* Re: [PATCH v2 2/2] mtd: nand: raw: brcmnand: When oops in progress use pio and interrupt polling
  2019-05-16 15:45 ` [PATCH v2 2/2] mtd: nand: raw: brcmnand: When oops in progress use pio and interrupt polling Kamal Dasu
@ 2019-05-16 16:14   ` Kamal Dasu
  0 siblings, 0 replies; 3+ messages in thread
From: Kamal Dasu @ 2019-05-16 16:14 UTC (permalink / raw)
  To: Kamal Dasu
  Cc: MTD Maling List, bcm-kernel-feedback-list, open list,
	Brian Norris, Miquel Raynal, Richard Weinberger, David Woodhouse,
	Marek Vasut, Vignesh Raghavendra

Please ignore v2 patch 1/2 and 2/2. The commit ordering is not right.
v3 patch on the way



Kamal

On Thu, May 16, 2019 at 12:01 PM Kamal Dasu <kdasu.kdev@gmail.com> wrote:
>
> If mtd_oops is in progress switch to polling for nand command completion
> interrupts and use PIO mode wihtout DMA so that the mtd_oops buffer can
> be completely written in the assinged nand partition.
>
> Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
> ---
>  drivers/mtd/nand/raw/brcmnand/brcmnand.c | 1 -
>  1 file changed, 1 deletion(-)
>
> diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
> index a30a7f0..dca8eb8 100644
> --- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
> +++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
> @@ -835,7 +835,6 @@ static inline void disable_ctrl_irqs(struct brcmnand_controller *ctrl)
>         }
>
>         disable_irq(ctrl->irq);
> -
>         ctrl->pio_poll_mode = true;
>  }
>
> --
> 1.9.0.138.g2de3478
>

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2019-05-16 16:15 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-16 15:45 [PATCH v2 1/2] mtd: Add flag to indicate panic_write Kamal Dasu
2019-05-16 15:45 ` [PATCH v2 2/2] mtd: nand: raw: brcmnand: When oops in progress use pio and interrupt polling Kamal Dasu
2019-05-16 16:14   ` Kamal Dasu

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).