[PATCH v2 00/11] dm-raid: fix v6.7 regressions

[PATCH v2 00/11] dm-raid: fix v6.7 regressions

[Yu Kuai]

First regression related to stop sync thread:

The lifetime of sync_thread is designed as following:

1) Decide want to start sync_thread, set MD_RECOVERY_NEEDED, and wake up
daemon thread;
2) Daemon thread detect that MD_RECOVERY_NEEDED is set, then set
MD_RECOVERY_RUNNING and register sync_thread;
3) Execute md_do_sync() for the actual work, if it's done or
interrupted, it will set MD_RECOVERY_DONE and wake up daemone thread;
4) Daemon thread detect that MD_RECOVERY_DONE is set, then clear
MD_RECOVERY_RUNNING and unregister sync_thread;

In v6.7, we fix md/raid to follow this design by commit f52f5c71f3d4
("md: fix stopping sync thread"), however, dm-raid is not considered at
that time, and following test will hang:

shell/integrity-caching.sh
shell/lvconvert-raid-reshape.sh

This patch set fix the broken test by patch 1-4;
 - patch 1 fix that step 4) is broken by suspended array;
 - patch 2 fix that step 4) is broken by read-only array;
 - patch 3 fix that step 3) is broken that md_do_sync() doesn't set
 MD_RECOVERY_DONE; Noted that this patch will introdece new problem that
 data will be corrupted, which will be fixed in later patches.
 - patch 4 fix that setp 1) is broken that sync_thread is register and
 MD_RECOVERY_RUNNING is set directly;

With patch 1-4, the above test won't hang anymore, however, the test
will still fail and complain that ext4 is corrupted;

Second regression related to frozen sync thread:

Noted that for raid456, if reshape is interrupted, then call
"pers->start_reshape" will corrupt data. This is because dm-raid rely on
md_do_sync() doesn't set MD_RECOVERY_DONE so that new sync_thread won't
be registered, and patch 3 just break this.

 - Patch 5-6 fix this problem by interrupting reshape and frozen
 sync_thread in dm_suspend(), then unfrozen and continue reshape in
dm_resume(). It's verified that dm-raid tests won't complain that
ext4 is corrupted anymore.
 - Patch 7 fix the problem that raid_message() call
 md_reap_sync_thread() directly, without holding 'reconfig_mutex'.

Last regression related to dm-raid456 IO concurrent with reshape:

For raid456, if reshape is still in progress, then IO across reshape
position will wait for reshape to make progress. However, for dm-raid,
in following cases reshape will never make progress hence IO will hang:

1) the array is read-only;
2) MD_RECOVERY_WAIT is set;
3) MD_RECOVERY_FROZEN is set;

After commit c467e97f079f ("md/raid6: use valid sector values to determine
if an I/O should wait on the reshape") fix the problem that IO across
reshape position doesn't wait for reshape, the dm-raid test
shell/lvconvert-raid-reshape.sh start to hang at raid5_make_request().

For md/raid, the problem doesn't exist because:

1) If array is read-only, it can switch to read-write by ioctl/sysfs;
2) md/raid never set MD_RECOVERY_WAIT;
3) If MD_RECOVERY_FROZEN is set, mddev_suspend() doesn't hold
   'reconfig_mutex' anymore, it can be cleared and reshape can continue by
   sysfs api 'sync_action'.

However, I'm not sure yet how to avoid the problem in dm-raid yet.

 - patch 9-11 fix this problem by detecting the above 3 cases in
 dm_suspend(), and fail those IO directly.

If user really meet the IO error, then it means they're reading the wrong
data before c467e97f079f. And it's safe to read/write the array after
reshape make progress successfully.

Tests:

I already run the following two tests many times and verified that they
won't fail anymore:

shell/integrity-caching.sh
shell/lvconvert-raid-reshape.sh

For other tests, I'm still running. However, I'm sending this patchset
in case people think the fixes is not appropriate. Running the full
tests will cost lots of time in my VM, and I'll update full test results
soon.

Yu Kuai (11):
  md: don't ignore suspended array in md_check_recovery()
  md: don't ignore read-only array in md_check_recovery()
  md: make sure md_do_sync() will set MD_RECOVERY_DONE
  md: don't register sync_thread for reshape directly
  md: export helpers to stop sync_thread
  dm-raid: really frozen sync_thread during suspend
  md/dm-raid: don't call md_reap_sync_thread() directly
  dm-raid: remove mddev_suspend/resume()
  dm-raid: add a new helper prepare_suspend() in md_personality
  md: export helper md_is_rdwr()
  md/raid456: fix a deadlock for dm-raid456 while io concurrent with
    reshape

 drivers/md/dm-raid.c |  76 +++++++++++++++++++++----------
 drivers/md/md.c      | 104 ++++++++++++++++++++++++++++---------------
 drivers/md/md.h      |  16 +++++++
 drivers/md/raid10.c  |  16 +------
 drivers/md/raid5.c   |  61 +++++++++++++------------
 5 files changed, 171 insertions(+), 102 deletions(-)

-- 
2.39.2

[PATCH v2 01/11] md: don't ignore suspended array in md_check_recovery()

[Yu Kuai]

mddev_suspend() never stop sync_thread, hence it doesn't make sense to
ignore suspended array in md_check_recovery(), which might cause
sync_thread can't be unregistered.

After commit f52f5c71f3d4 ("md: fix stopping sync thread"), following
hang can be triggered by test shell/integrity-caching.sh:

1) suspend the array:
raid_postsuspend
 mddev_suspend

2) stop the array:
raid_dtr
 md_stop
  __md_stop_writes
   stop_sync_thread
    set_bit(MD_RECOVERY_INTR, &mddev->recovery);
    md_wakeup_thread_directly(mddev->sync_thread);
    wait_event(..., !test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))

3) sync thread done:
md_do_sync
 set_bit(MD_RECOVERY_DONE, &mddev->recovery);
 md_wakeup_thread(mddev->thread);

4) daemon thread can't unregister sync thread:
md_check_recovery
 if (mddev->suspended)
   return; -> return directly
 md_read_sync_thread
 clear_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
 -> MD_RECOVERY_RUNNING can't be cleared, hence step 2 hang;

This problem is not just related to dm-raid, fix it by ignoring
suspended array in md_check_recovery(). And follow up patches will
improve dm-raid better to frozen sync thread during suspend.

Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Closes: https://lore.kernel.org/all/8fb335e-6d2c-dbb5-d7-ded8db5145a@redhat.com/
Fixes: 68866e425be2 ("MD: no sync IO while suspended")
Fixes: f52f5c71f3d4 ("md: fix stopping sync thread")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
---
 drivers/md/md.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index 2266358d8074..07b80278eaa5 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -9469,9 +9469,6 @@ static void md_start_sync(struct work_struct *ws)
  */
 void md_check_recovery(struct mddev *mddev)
 {
-	if (READ_ONCE(mddev->suspended))
-		return;
-
 	if (mddev->bitmap)
 		md_bitmap_daemon_work(mddev);
 
-- 
2.39.2

[PATCH v2 02/11] md: don't ignore read-only array in md_check_recovery()

[Yu Kuai]

Usually if the array is not read-write, md_check_recovery() won't
register new sync_thread in the first place. And if the array is
read-write and sync_thread is registered, md_set_readonly() will
unregister sync_thread before setting the array read-only. md/raid
follow this behavior hence there is no problem.

After commit f52f5c71f3d4 ("md: fix stopping sync thread"), following
hang can be triggered by test shell/integrity-caching.sh:

1) array is read-only. dm-raid update super block:
rs_update_sbs
 ro = mddev->ro
 mddev->ro = 0
  -> set array read-write
 md_update_sb

2) register new sync thread concurrently.

3) dm-raid set array back to read-only:
rs_update_sbs
 mddev->ro = ro

4) stop the array:
raid_dtr
 md_stop
  stop_sync_thread
    set_bit(MD_RECOVERY_INTR, &mddev->recovery);
    md_wakeup_thread_directly(mddev->sync_thread);
    wait_event(..., !test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))

5) sync thread done:
 md_do_sync
 set_bit(MD_RECOVERY_DONE, &mddev->recovery);
 md_wakeup_thread(mddev->thread);

6) daemon thread can't unregister sync thread:
 md_check_recovery
  if (!md_is_rdwr(mddev) &&
      !test_bit(MD_RECOVERY_NEEDED, &mddev->recovery))
   return;
  -> -> MD_RECOVERY_RUNNING can't be cleared, hence step 4 hang;

The root cause is that dm-raid manipulate 'mddev->ro' by itself,
however, dm-raid really should stop sync thread before setting the
array read-only. Unfortunately, I need to read more code before I
can refacter the handler of 'mddev->ro' in dm-raid, hence let's fix
the problem the easy way for now to prevent dm-raid regression.

Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Closes: https://lore.kernel.org/all/9801e40-8ac7-e225-6a71-309dcf9dc9aa@redhat.com/
Fixes: ecbfb9f118bc ("dm raid: add raid level takeover support")
Fixes: f52f5c71f3d4 ("md: fix stopping sync thread")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
---
 drivers/md/md.c | 31 ++++++++++++++++++-------------
 1 file changed, 18 insertions(+), 13 deletions(-)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index 07b80278eaa5..6906d023f1d6 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -9445,6 +9445,20 @@ static void md_start_sync(struct work_struct *ws)
 		sysfs_notify_dirent_safe(mddev->sysfs_action);
 }
 
+static void unregister_sync_thread(struct mddev *mddev)
+{
+	if (!test_bit(MD_RECOVERY_DONE, &mddev->recovery)) {
+		/* resync/recovery still happening */
+		clear_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
+		return;
+	}
+
+	if (WARN_ON_ONCE(!mddev->sync_thread))
+		return;
+
+	md_reap_sync_thread(mddev);
+}
+
 /*
  * This routine is regularly called by all per-raid-array threads to
  * deal with generic issues like resync and super-block update.
@@ -9482,7 +9496,8 @@ void md_check_recovery(struct mddev *mddev)
 	}
 
 	if (!md_is_rdwr(mddev) &&
-	    !test_bit(MD_RECOVERY_NEEDED, &mddev->recovery))
+	    !test_bit(MD_RECOVERY_NEEDED, &mddev->recovery) &&
+	    !test_bit(MD_RECOVERY_DONE, &mddev->recovery))
 		return;
 	if ( ! (
 		(mddev->sb_flags & ~ (1<<MD_SB_CHANGE_PENDING)) ||
@@ -9504,8 +9519,7 @@ void md_check_recovery(struct mddev *mddev)
 			struct md_rdev *rdev;
 
 			if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) {
-				/* sync_work already queued. */
-				clear_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
+				unregister_sync_thread(mddev);
 				goto unlock;
 			}
 
@@ -9568,16 +9582,7 @@ void md_check_recovery(struct mddev *mddev)
 		 * still set.
 		 */
 		if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) {
-			if (!test_bit(MD_RECOVERY_DONE, &mddev->recovery)) {
-				/* resync/recovery still happening */
-				clear_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
-				goto unlock;
-			}
-
-			if (WARN_ON_ONCE(!mddev->sync_thread))
-				goto unlock;
-
-			md_reap_sync_thread(mddev);
+			unregister_sync_thread(mddev);
 			goto unlock;
 		}
 
-- 
2.39.2

[PATCH v2 03/11] md: make sure md_do_sync() will set MD_RECOVERY_DONE

[Yu Kuai]

stop_sync_thread() will interrupt md_do_sync(), and md_do_sync() must
set MD_RECOVERY_DONE, so that follow up md_check_recovery() will
unregister sync_thread, clear MD_RECOVERY_RUNNING and wake up
stop_sync_thread().

If MD_RECOVERY_WAIT is set or the array is read-only, md_do_sync() will
return without setting MD_RECOVERY_DONE, and after commit f52f5c71f3d4
("md: fix stopping sync thread"), dm-raid switch from
md_reap_sync_thread() to stop_sync_thread() to unregister sync_thread
from md_stop() and md_stop_writes(), causing the test
shell/lvconvert-raid-reshape.sh hang.

We shouldn't switch back to md_reap_sync_thread() because it's
problematic in the first place. Fix the problem by making sure
md_do_sync() will set MD_RECOVERY_DONE.

Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Closes: https://lore.kernel.org/all/ece2b06f-d647-6613-a534-ff4c9bec1142@redhat.com/
Fixes: d5d885fd514f ("md: introduce new personality funciton start()")
Fixes: 5fd6c1dce06e ("[PATCH] md: allow checkpoint of recovery with version-1 superblock")
Fixes: f52f5c71f3d4 ("md: fix stopping sync thread")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
---
 drivers/md/md.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index 6906d023f1d6..c65dfd156090 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -8788,12 +8788,16 @@ void md_do_sync(struct md_thread *thread)
 	int ret;
 
 	/* just incase thread restarts... */
-	if (test_bit(MD_RECOVERY_DONE, &mddev->recovery) ||
-	    test_bit(MD_RECOVERY_WAIT, &mddev->recovery))
+	if (test_bit(MD_RECOVERY_DONE, &mddev->recovery))
 		return;
-	if (!md_is_rdwr(mddev)) {/* never try to sync a read-only array */
+
+	if (test_bit(MD_RECOVERY_INTR, &mddev->recovery))
+		goto skip;
+
+	if (test_bit(MD_RECOVERY_WAIT, &mddev->recovery) ||
+	    !md_is_rdwr(mddev)) {/* never try to sync a read-only array */
 		set_bit(MD_RECOVERY_INTR, &mddev->recovery);
-		return;
+		goto skip;
 	}
 
 	if (mddev_is_clustered(mddev)) {
-- 
2.39.2

[PATCH v2 04/11] md: don't register sync_thread for reshape directly

[Yu Kuai]

Currently, if reshape is interrupted, then reassemble the array will
register sync_thread directly from pers->run(), in this case
'MD_RECOVERY_RUNNING' is set directly, however, there is no guarantee
that md_do_sync() will be executed, hence stop_sync_thread() will hang
because 'MD_RECOVERY_RUNNING' can't be cleared.

Last patch make sure that md_do_sync() will set MD_RECOVERY_DONE,
however, following hang can still be triggered by dm-raid test
shell/lvconvert-raid-reshape.sh occasionally:

[root@fedora ~]# cat /proc/1982/stack
[<0>] stop_sync_thread+0x1ab/0x270 [md_mod]
[<0>] md_frozen_sync_thread+0x5c/0xa0 [md_mod]
[<0>] raid_presuspend+0x1e/0x70 [dm_raid]
[<0>] dm_table_presuspend_targets+0x40/0xb0 [dm_mod]
[<0>] __dm_destroy+0x2a5/0x310 [dm_mod]
[<0>] dm_destroy+0x16/0x30 [dm_mod]
[<0>] dev_remove+0x165/0x290 [dm_mod]
[<0>] ctl_ioctl+0x4bb/0x7b0 [dm_mod]
[<0>] dm_ctl_ioctl+0x11/0x20 [dm_mod]
[<0>] vfs_ioctl+0x21/0x60
[<0>] __x64_sys_ioctl+0xb9/0xe0
[<0>] do_syscall_64+0xc6/0x230
[<0>] entry_SYSCALL_64_after_hwframe+0x6c/0x74

Meanwhile mddev->recovery is:
MD_RECOVERY_RUNNING |
MD_RECOVERY_INTR |
MD_RECOVERY_RESHAPE |
MD_RECOVERY_FROZEN

Fix this problem by remove the code to register sync_thread directly
from raid10 and raid5. And let md_check_recovery() to register
sync_thread.

Fixes: f67055780caa ("[PATCH] md: Checkpoint and allow restart of raid5 reshape")
Fixes: f52f5c71f3d4 ("md: fix stopping sync thread")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
---
 drivers/md/md.c     |  5 ++++-
 drivers/md/raid10.c | 16 ++--------------
 drivers/md/raid5.c  | 29 ++---------------------------
 3 files changed, 8 insertions(+), 42 deletions(-)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index c65dfd156090..6c5d0a372927 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -9372,6 +9372,7 @@ static void md_start_sync(struct work_struct *ws)
 	struct mddev *mddev = container_of(ws, struct mddev, sync_work);
 	int spares = 0;
 	bool suspend = false;
+	char *name;
 
 	if (md_spares_need_change(mddev))
 		suspend = true;
@@ -9404,8 +9405,10 @@ static void md_start_sync(struct work_struct *ws)
 	if (spares)
 		md_bitmap_write_all(mddev->bitmap);
 
+	name = test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery) ?
+			"reshape" : "resync";
 	rcu_assign_pointer(mddev->sync_thread,
-			   md_register_thread(md_do_sync, mddev, "resync"));
+			   md_register_thread(md_do_sync, mddev, name));
 	if (!mddev->sync_thread) {
 		pr_warn("%s: could not start resync thread...\n",
 			mdname(mddev));
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 7412066ea22c..a5f8419e2df1 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -4175,11 +4175,7 @@ static int raid10_run(struct mddev *mddev)
 		clear_bit(MD_RECOVERY_SYNC, &mddev->recovery);
 		clear_bit(MD_RECOVERY_CHECK, &mddev->recovery);
 		set_bit(MD_RECOVERY_RESHAPE, &mddev->recovery);
-		set_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
-		rcu_assign_pointer(mddev->sync_thread,
-			md_register_thread(md_do_sync, mddev, "reshape"));
-		if (!mddev->sync_thread)
-			goto out_free_conf;
+		set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
 	}
 
 	return 0;
@@ -4573,16 +4569,8 @@ static int raid10_start_reshape(struct mddev *mddev)
 	clear_bit(MD_RECOVERY_CHECK, &mddev->recovery);
 	clear_bit(MD_RECOVERY_DONE, &mddev->recovery);
 	set_bit(MD_RECOVERY_RESHAPE, &mddev->recovery);
-	set_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
-
-	rcu_assign_pointer(mddev->sync_thread,
-			   md_register_thread(md_do_sync, mddev, "reshape"));
-	if (!mddev->sync_thread) {
-		ret = -EAGAIN;
-		goto abort;
-	}
+	set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
 	conf->reshape_checkpoint = jiffies;
-	md_wakeup_thread(mddev->sync_thread);
 	md_new_event();
 	return 0;
 
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 8497880135ee..6a7a32f7fb91 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -7936,11 +7936,7 @@ static int raid5_run(struct mddev *mddev)
 		clear_bit(MD_RECOVERY_SYNC, &mddev->recovery);
 		clear_bit(MD_RECOVERY_CHECK, &mddev->recovery);
 		set_bit(MD_RECOVERY_RESHAPE, &mddev->recovery);
-		set_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
-		rcu_assign_pointer(mddev->sync_thread,
-			md_register_thread(md_do_sync, mddev, "reshape"));
-		if (!mddev->sync_thread)
-			goto abort;
+		set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
 	}
 
 	/* Ok, everything is just fine now */
@@ -8506,29 +8502,8 @@ static int raid5_start_reshape(struct mddev *mddev)
 	clear_bit(MD_RECOVERY_CHECK, &mddev->recovery);
 	clear_bit(MD_RECOVERY_DONE, &mddev->recovery);
 	set_bit(MD_RECOVERY_RESHAPE, &mddev->recovery);
-	set_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
-	rcu_assign_pointer(mddev->sync_thread,
-			   md_register_thread(md_do_sync, mddev, "reshape"));
-	if (!mddev->sync_thread) {
-		mddev->recovery = 0;
-		spin_lock_irq(&conf->device_lock);
-		write_seqcount_begin(&conf->gen_lock);
-		mddev->raid_disks = conf->raid_disks = conf->previous_raid_disks;
-		mddev->new_chunk_sectors =
-			conf->chunk_sectors = conf->prev_chunk_sectors;
-		mddev->new_layout = conf->algorithm = conf->prev_algo;
-		rdev_for_each(rdev, mddev)
-			rdev->new_data_offset = rdev->data_offset;
-		smp_wmb();
-		conf->generation --;
-		conf->reshape_progress = MaxSector;
-		mddev->reshape_position = MaxSector;
-		write_seqcount_end(&conf->gen_lock);
-		spin_unlock_irq(&conf->device_lock);
-		return -EAGAIN;
-	}
+	set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
 	conf->reshape_checkpoint = jiffies;
-	md_wakeup_thread(mddev->sync_thread);
 	md_new_event();
 	return 0;
 }
-- 
2.39.2

[PATCH v2 05/11] md: export helpers to stop sync_thread

[Yu Kuai]

The new heleprs will be used in dm-raid in later patches to fix
regressions and prevent calling md_reap_sync_thread() directly.

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
---
 drivers/md/md.c | 41 +++++++++++++++++++++++++++++++++++++----
 drivers/md/md.h |  3 +++
 2 files changed, 40 insertions(+), 4 deletions(-)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index 6c5d0a372927..90cf31b53804 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -4915,30 +4915,63 @@ static void stop_sync_thread(struct mddev *mddev, bool locked, bool check_seq)
 		mddev_lock_nointr(mddev);
 }
 
-static void idle_sync_thread(struct mddev *mddev)
+void md_idle_sync_thread(struct mddev *mddev)
 {
+	lockdep_assert_held(mddev->reconfig_mutex);
+
 	mutex_lock(&mddev->sync_mutex);
 	clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
+	stop_sync_thread(mddev, true, true);
+	mutex_unlock(&mddev->sync_mutex);
+}
+EXPORT_SYMBOL_GPL(md_idle_sync_thread);
+
+void md_frozen_sync_thread(struct mddev *mddev)
+{
+	lockdep_assert_held(mddev->reconfig_mutex);
+
+	mutex_lock(&mddev->sync_mutex);
+	set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
+	stop_sync_thread(mddev, true, false);
+	mutex_unlock(&mddev->sync_mutex);
+}
+EXPORT_SYMBOL_GPL(md_frozen_sync_thread);
 
+void md_unfrozen_sync_thread(struct mddev *mddev)
+{
+	lockdep_assert_held(mddev->reconfig_mutex);
+
+	mutex_lock(&mddev->sync_mutex);
+	clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
+	set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
+	md_wakeup_thread(mddev->thread);
+	sysfs_notify_dirent_safe(mddev->sysfs_action);
+	mutex_unlock(&mddev->sync_mutex);
+}
+EXPORT_SYMBOL_GPL(md_unfrozen_sync_thread);
+
+static void idle_sync_thread(struct mddev *mddev)
+{
 	if (mddev_lock(mddev)) {
 		mutex_unlock(&mddev->sync_mutex);
 		return;
 	}
 
+	mutex_lock(&mddev->sync_mutex);
+	clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
 	stop_sync_thread(mddev, false, true);
 	mutex_unlock(&mddev->sync_mutex);
 }
 
 static void frozen_sync_thread(struct mddev *mddev)
 {
-	mutex_lock(&mddev->sync_mutex);
-	set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
-
 	if (mddev_lock(mddev)) {
 		mutex_unlock(&mddev->sync_mutex);
 		return;
 	}
 
+	mutex_lock(&mddev->sync_mutex);
+	set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
 	stop_sync_thread(mddev, false, false);
 	mutex_unlock(&mddev->sync_mutex);
 }
diff --git a/drivers/md/md.h b/drivers/md/md.h
index 8d881cc59799..437ab70ce79b 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -781,6 +781,9 @@ extern void md_rdev_clear(struct md_rdev *rdev);
 extern void md_handle_request(struct mddev *mddev, struct bio *bio);
 extern int mddev_suspend(struct mddev *mddev, bool interruptible);
 extern void mddev_resume(struct mddev *mddev);
+extern void md_idle_sync_thread(struct mddev *mddev);
+extern void md_frozen_sync_thread(struct mddev *mddev);
+extern void md_unfrozen_sync_thread(struct mddev *mddev);
 
 extern void md_reload_sb(struct mddev *mddev, int raid_disk);
 extern void md_update_sb(struct mddev *mddev, int force);
-- 
2.39.2

[PATCH v2 06/11] dm-raid: really frozen sync_thread during suspend

[Yu Kuai]

1) The flag MD_RECOVERY_FROZEN doesn't mean that sync thread is frozen,
   it only prevent new sync_thread to start, and it can't stop the
   running sync thread;
2) The flag MD_RECOVERY_FROZEN doesn't mean that writes are stopped, use
   it as condition for md_stop_writes() in raid_postsuspend() doesn't
   look correct.
3) raid_message can set/clear the flag MD_RECOVERY_FROZEN at anytime,
   and if MD_RECOVERY_FROZEN is cleared while the array is suspended,
   new sync_thread can start unexpected.

Fix above problems by using the new helper to suspend the array during
suspend, also disallow raid_message() to change sync_thread status
during suspend.

Note that after commit f52f5c71f3d4 ("md: fix stopping sync thread"), the
test shell/lvconvert-raid-reshape.sh start to hang in stop_sync_thread(),
and with previous fixes, the test won't hang there anymore, however, the
test will still fail and complain that ext4 is corrupted. And with this
patch, the test won't hang due to stop_sync_thread() or fail due to ext4
is corrupted anymore. However, there is still a deadlock related to
dm-raid456 that will be fixed in following patches.

Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Closes: https://lore.kernel.org/all/e5e8afe2-e9a8-49a2-5ab0-958d4065c55e@redhat.com/
Fixes: 1af2048a3e87 ("dm raid: fix deadlock caused by premature md_stop_writes()")
Fixes: 9dbd1aa3a81c ("dm raid: add reshaping support to the target")
Fixes: f52f5c71f3d4 ("md: fix stopping sync thread")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
---
 drivers/md/dm-raid.c | 38 +++++++++++++++++++++++++++++---------
 1 file changed, 29 insertions(+), 9 deletions(-)

diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c
index eb009d6bb03a..5ce3c6020b1b 100644
--- a/drivers/md/dm-raid.c
+++ b/drivers/md/dm-raid.c
@@ -3240,11 +3240,12 @@ static int raid_ctr(struct dm_target *ti, unsigned int argc, char **argv)
 	rs->md.ro = 1;
 	rs->md.in_sync = 1;
 
-	/* Keep array frozen until resume. */
-	set_bit(MD_RECOVERY_FROZEN, &rs->md.recovery);
-
 	/* Has to be held on running the array */
 	mddev_suspend_and_lock_nointr(&rs->md);
+
+	/* Keep array frozen until resume. */
+	md_frozen_sync_thread(&rs->md);
+
 	r = md_run(&rs->md);
 	rs->md.in_sync = 0; /* Assume already marked dirty */
 	if (r) {
@@ -3722,6 +3723,9 @@ static int raid_message(struct dm_target *ti, unsigned int argc, char **argv,
 	if (!mddev->pers || !mddev->pers->sync_request)
 		return -EINVAL;
 
+	if (test_bit(RT_FLAG_RS_SUSPENDED, &rs->runtime_flags))
+		return -EBUSY;
+
 	if (!strcasecmp(argv[0], "frozen"))
 		set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
 	else
@@ -3791,15 +3795,31 @@ static void raid_io_hints(struct dm_target *ti, struct queue_limits *limits)
 	blk_limits_io_opt(limits, chunk_size_bytes * mddev_data_stripes(rs));
 }
 
+static void raid_presuspend(struct dm_target *ti)
+{
+	struct raid_set *rs = ti->private;
+
+	mddev_lock_nointr(&rs->md);
+	md_frozen_sync_thread(&rs->md);
+	mddev_unlock(&rs->md);
+}
+
+static void raid_presuspend_undo(struct dm_target *ti)
+{
+	struct raid_set *rs = ti->private;
+
+	mddev_lock_nointr(&rs->md);
+	md_unfrozen_sync_thread(&rs->md);
+	mddev_unlock(&rs->md);
+}
+
 static void raid_postsuspend(struct dm_target *ti)
 {
 	struct raid_set *rs = ti->private;
 
 	if (!test_and_set_bit(RT_FLAG_RS_SUSPENDED, &rs->runtime_flags)) {
 		/* Writes have to be stopped before suspending to avoid deadlocks. */
-		if (!test_bit(MD_RECOVERY_FROZEN, &rs->md.recovery))
-			md_stop_writes(&rs->md);
-
+		md_stop_writes(&rs->md);
 		mddev_suspend(&rs->md, false);
 	}
 }
@@ -4012,8 +4032,6 @@ static int raid_preresume(struct dm_target *ti)
 	}
 
 	/* Check for any resize/reshape on @rs and adjust/initiate */
-	/* Be prepared for mddev_resume() in raid_resume() */
-	set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
 	if (mddev->recovery_cp && mddev->recovery_cp < MaxSector) {
 		set_bit(MD_RECOVERY_REQUESTED, &mddev->recovery);
 		mddev->resync_min = mddev->recovery_cp;
@@ -4056,9 +4074,9 @@ static void raid_resume(struct dm_target *ti)
 			rs_set_capacity(rs);
 
 		mddev_lock_nointr(mddev);
-		clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
 		mddev->ro = 0;
 		mddev->in_sync = 0;
+		md_unfrozen_sync_thread(mddev);
 		mddev_unlock_and_resume(mddev);
 	}
 }
@@ -4074,6 +4092,8 @@ static struct target_type raid_target = {
 	.message = raid_message,
 	.iterate_devices = raid_iterate_devices,
 	.io_hints = raid_io_hints,
+	.presuspend = raid_presuspend,
+	.presuspend_undo = raid_presuspend_undo,
 	.postsuspend = raid_postsuspend,
 	.preresume = raid_preresume,
 	.resume = raid_resume,
-- 
2.39.2

[PATCH v2 07/11] md/dm-raid: don't call md_reap_sync_thread() directly

[Yu Kuai]

Currently md_reap_sync_thread() is called from raid_message() directly
without holding 'reconfig_mutex', this is definitely unsafe because
md_reap_sync_thread() can change many fields that is protected by
'reconfig_mutex'.

However, hold 'reconfig_mutex' here is still problematic because this
will cause deadlock, for example, commit 130443d60b1b ("md: refactor
idle/frozen_sync_thread() to fix deadlock").

Fix this problem by using stop_sync_thread() to unregister sync_thread,
like md/raid did.

Fixes: be83651f0050 ("DM RAID: Add message/status support for changing sync action")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
---
 drivers/md/dm-raid.c | 28 ++++++++++++++++++----------
 1 file changed, 18 insertions(+), 10 deletions(-)

diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c
index 5ce3c6020b1b..6b6c011d9f69 100644
--- a/drivers/md/dm-raid.c
+++ b/drivers/md/dm-raid.c
@@ -3719,6 +3719,7 @@ static int raid_message(struct dm_target *ti, unsigned int argc, char **argv,
 {
 	struct raid_set *rs = ti->private;
 	struct mddev *mddev = &rs->md;
+	int ret = 0;
 
 	if (!mddev->pers || !mddev->pers->sync_request)
 		return -EINVAL;
@@ -3726,17 +3727,24 @@ static int raid_message(struct dm_target *ti, unsigned int argc, char **argv,
 	if (test_bit(RT_FLAG_RS_SUSPENDED, &rs->runtime_flags))
 		return -EBUSY;
 
-	if (!strcasecmp(argv[0], "frozen"))
-		set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
-	else
-		clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
+	if (!strcasecmp(argv[0], "frozen")) {
+		ret = mddev_lock(mddev);
+		if (ret)
+			return ret;
 
-	if (!strcasecmp(argv[0], "idle") || !strcasecmp(argv[0], "frozen")) {
-		if (mddev->sync_thread) {
-			set_bit(MD_RECOVERY_INTR, &mddev->recovery);
-			md_reap_sync_thread(mddev);
-		}
-	} else if (decipher_sync_action(mddev, mddev->recovery) != st_idle)
+		md_frozen_sync_thread(mddev);
+		mddev_unlock(mddev);
+	} else if (!strcasecmp(argv[0], "idle")) {
+		ret = mddev_lock(mddev);
+		if (ret)
+			return ret;
+
+		md_idle_sync_thread(mddev);
+		mddev_unlock(mddev);
+	}
+
+	clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
+	if (decipher_sync_action(mddev, mddev->recovery) != st_idle)
 		return -EBUSY;
 	else if (!strcasecmp(argv[0], "resync"))
 		; /* MD_RECOVERY_NEEDED set below */
-- 
2.39.2

[PATCH v2 08/11] dm-raid: remove mddev_suspend/resume()

[Yu Kuai]

dm_suspend() already make sure that no new IO can be issued and will
wait for all dispatched IO to be done. There is no need to call
mddev_suspend() to make sure that again.

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
---
 drivers/md/dm-raid.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c
index 6b6c011d9f69..f1637cf88559 100644
--- a/drivers/md/dm-raid.c
+++ b/drivers/md/dm-raid.c
@@ -3241,7 +3241,7 @@ static int raid_ctr(struct dm_target *ti, unsigned int argc, char **argv)
 	rs->md.in_sync = 1;
 
 	/* Has to be held on running the array */
-	mddev_suspend_and_lock_nointr(&rs->md);
+	mddev_lock_nointr(&rs->md);
 
 	/* Keep array frozen until resume. */
 	md_frozen_sync_thread(&rs->md);
@@ -3825,11 +3825,9 @@ static void raid_postsuspend(struct dm_target *ti)
 {
 	struct raid_set *rs = ti->private;
 
-	if (!test_and_set_bit(RT_FLAG_RS_SUSPENDED, &rs->runtime_flags)) {
+	if (!test_and_set_bit(RT_FLAG_RS_SUSPENDED, &rs->runtime_flags))
 		/* Writes have to be stopped before suspending to avoid deadlocks. */
 		md_stop_writes(&rs->md);
-		mddev_suspend(&rs->md, false);
-	}
 }
 
 static void attempt_restore_of_faulty_devices(struct raid_set *rs)
@@ -4085,7 +4083,7 @@ static void raid_resume(struct dm_target *ti)
 		mddev->ro = 0;
 		mddev->in_sync = 0;
 		md_unfrozen_sync_thread(mddev);
-		mddev_unlock_and_resume(mddev);
+		mddev_unlock(mddev);
 	}
 }
 
-- 
2.39.2

[PATCH v2 09/11] dm-raid: add a new helper prepare_suspend() in md_personality

[Yu Kuai]

There are no functional changes for now, prepare to fix a deadlock for
dm-raid456.

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
---
 drivers/md/dm-raid.c | 10 +++++++---
 drivers/md/md.h      |  1 +
 2 files changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c
index f1637cf88559..ede2e4574ee5 100644
--- a/drivers/md/dm-raid.c
+++ b/drivers/md/dm-raid.c
@@ -3806,10 +3806,14 @@ static void raid_io_hints(struct dm_target *ti, struct queue_limits *limits)
 static void raid_presuspend(struct dm_target *ti)
 {
 	struct raid_set *rs = ti->private;
+	struct mddev *mddev = &rs->md;
 
-	mddev_lock_nointr(&rs->md);
-	md_frozen_sync_thread(&rs->md);
-	mddev_unlock(&rs->md);
+	mddev_lock_nointr(mddev);
+	md_frozen_sync_thread(mddev);
+	mddev_unlock(mddev);
+
+	if (mddev->pers && mddev->pers->prepare_suspend)
+		mddev->pers->prepare_suspend(mddev);
 }
 
 static void raid_presuspend_undo(struct dm_target *ti)
diff --git a/drivers/md/md.h b/drivers/md/md.h
index 437ab70ce79b..29b476ff3b9f 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -617,6 +617,7 @@ struct md_personality
 	int (*start_reshape) (struct mddev *mddev);
 	void (*finish_reshape) (struct mddev *mddev);
 	void (*update_reshape_pos) (struct mddev *mddev);
+	void (*prepare_suspend) (struct mddev *mddev);
 	/* quiesce suspends or resumes internal processing.
 	 * 1 - stop new actions and wait for action io to complete
 	 * 0 - return to normal behaviour
-- 
2.39.2

[PATCH v2 10/11] md: export helper md_is_rdwr()

[Yu Kuai]

There are no functional changes for now, prepare to fix a deadlock for
dm-raid456.

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
---
 drivers/md/md.c | 12 ------------
 drivers/md/md.h | 12 ++++++++++++
 2 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index 90cf31b53804..c803a805ea0d 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -99,18 +99,6 @@ static void mddev_detach(struct mddev *mddev);
 static void export_rdev(struct md_rdev *rdev, struct mddev *mddev);
 static void md_wakeup_thread_directly(struct md_thread __rcu *thread);
 
-enum md_ro_state {
-	MD_RDWR,
-	MD_RDONLY,
-	MD_AUTO_READ,
-	MD_MAX_STATE
-};
-
-static bool md_is_rdwr(struct mddev *mddev)
-{
-	return (mddev->ro == MD_RDWR);
-}
-
 /*
  * Default number of read corrections we'll attempt on an rdev
  * before ejecting it from the array. We divide the read error
diff --git a/drivers/md/md.h b/drivers/md/md.h
index 29b476ff3b9f..98da86d38ba8 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -558,6 +558,18 @@ enum recovery_flags {
 	MD_RESYNCING_REMOTE,	/* remote node is running resync thread */
 };
 
+enum md_ro_state {
+	MD_RDWR,
+	MD_RDONLY,
+	MD_AUTO_READ,
+	MD_MAX_STATE
+};
+
+static bool md_is_rdwr(struct mddev *mddev)
+{
+	return (mddev->ro == MD_RDWR);
+}
+
 static inline int __must_check mddev_lock(struct mddev *mddev)
 {
 	return mutex_lock_interruptible(&mddev->reconfig_mutex);
-- 
2.39.2

[PATCH v2 11/11] md/raid456: fix a deadlock for dm-raid456 while io concurrent with reshape

[Yu Kuai]

For raid456, if reshape is still in progress, then IO across reshape
position will wait for reshape to make progress. However, for dm-raid,
in following cases reshape will never make progress hence IO will hang:

1) the array is read-only;
2) MD_RECOVERY_WAIT is set;
3) MD_RECOVERY_FROZEN is set;

After commit c467e97f079f ("md/raid6: use valid sector values to determine
if an I/O should wait on the reshape") fix the problem that IO across
reshape position doesn't wait for reshape, the dm-raid test
shell/lvconvert-raid-reshape.sh start to hang:

[root@fedora ~]# cat /proc/979/stack
[<0>] wait_woken+0x7d/0x90
[<0>] raid5_make_request+0x929/0x1d70 [raid456]
[<0>] md_handle_request+0xc2/0x3b0 [md_mod]
[<0>] raid_map+0x2c/0x50 [dm_raid]
[<0>] __map_bio+0x251/0x380 [dm_mod]
[<0>] dm_submit_bio+0x1f0/0x760 [dm_mod]
[<0>] __submit_bio+0xc2/0x1c0
[<0>] submit_bio_noacct_nocheck+0x17f/0x450
[<0>] submit_bio_noacct+0x2bc/0x780
[<0>] submit_bio+0x70/0xc0
[<0>] mpage_readahead+0x169/0x1f0
[<0>] blkdev_readahead+0x18/0x30
[<0>] read_pages+0x7c/0x3b0
[<0>] page_cache_ra_unbounded+0x1ab/0x280
[<0>] force_page_cache_ra+0x9e/0x130
[<0>] page_cache_sync_ra+0x3b/0x110
[<0>] filemap_get_pages+0x143/0xa30
[<0>] filemap_read+0xdc/0x4b0
[<0>] blkdev_read_iter+0x75/0x200
[<0>] vfs_read+0x272/0x460
[<0>] ksys_read+0x7a/0x170
[<0>] __x64_sys_read+0x1c/0x30
[<0>] do_syscall_64+0xc6/0x230
[<0>] entry_SYSCALL_64_after_hwframe+0x6c/0x74

This is because reshape can't make progress.

For md/raid, the problem doesn't exist because register new sync_thread
doesn't rely on the IO to be done any more:

1) If array is read-only, it can switch to read-write by ioctl/sysfs;
2) md/raid never set MD_RECOVERY_WAIT;
3) If MD_RECOVERY_FROZEN is set, mddev_suspend() doesn't hold
   'reconfig_mutex', hence it can be cleared and reshape can continue by
   sysfs api 'sync_action'.

However, I'm not sure yet how to avoid the problem in dm-raid yet. This
patch detect the above 3 cases in dm_suspend(), and fail those IO
directly. If user really meet the IO error, then it means they're
reading the wrong data before c467e97f079f. And it's safe to read/write
the array after reshape make progress successfully.

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
---
 drivers/md/md.h    |  2 +-
 drivers/md/raid5.c | 32 +++++++++++++++++++++++++++++++-
 2 files changed, 32 insertions(+), 2 deletions(-)

diff --git a/drivers/md/md.h b/drivers/md/md.h
index 98da86d38ba8..8e81f9e2fb20 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -565,7 +565,7 @@ enum md_ro_state {
 	MD_MAX_STATE
 };
 
-static bool md_is_rdwr(struct mddev *mddev)
+static inline bool md_is_rdwr(struct mddev *mddev)
 {
 	return (mddev->ro == MD_RDWR);
 }
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 6a7a32f7fb91..812d7ec64da5 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -5915,6 +5915,13 @@ static int add_all_stripe_bios(struct r5conf *conf,
 	return ret;
 }
 
+static bool reshape_disabled(struct mddev *mddev)
+{
+	return !md_is_rdwr(mddev) ||
+	       test_bit(MD_RECOVERY_WAIT, &mddev->recovery) ||
+	       test_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
+}
+
 static enum stripe_result make_stripe_request(struct mddev *mddev,
 		struct r5conf *conf, struct stripe_request_ctx *ctx,
 		sector_t logical_sector, struct bio *bi)
@@ -5946,7 +5953,8 @@ static enum stripe_result make_stripe_request(struct mddev *mddev,
 			if (ahead_of_reshape(mddev, logical_sector,
 					     conf->reshape_safe)) {
 				spin_unlock_irq(&conf->device_lock);
-				return STRIPE_SCHEDULE_AND_RETRY;
+				ret = STRIPE_SCHEDULE_AND_RETRY;
+				goto out;
 			}
 		}
 		spin_unlock_irq(&conf->device_lock);
@@ -6025,6 +6033,13 @@ static enum stripe_result make_stripe_request(struct mddev *mddev,
 
 out_release:
 	raid5_release_stripe(sh);
+out:
+	if (ret == STRIPE_SCHEDULE_AND_RETRY && !mddev->gendisk &&
+	    reshape_disabled(mddev)) {
+		bi->bi_status = BLK_STS_IOERR;
+		ret = STRIPE_FAIL;
+		pr_err("dm-raid456: io failed across reshape position while reshape can't make progress");
+	}
 	return ret;
 }
 
@@ -8909,6 +8924,18 @@ static int raid5_start(struct mddev *mddev)
 	return r5l_start(conf->log);
 }
 
+/*
+ * This is only used for dm-raid456, caller already frozen sync_thread, hence
+ * if rehsape is still in progress, io that is waiting for reshape can never be
+ * done now, hence wake up and handle those IO.
+ */
+static void raid5_prepare_suspend(struct mddev *mddev)
+{
+	struct r5conf *conf = mddev->private;
+
+	wake_up(&conf->wait_for_overlap);
+}
+
 static struct md_personality raid6_personality =
 {
 	.name		= "raid6",
@@ -8932,6 +8959,7 @@ static struct md_personality raid6_personality =
 	.quiesce	= raid5_quiesce,
 	.takeover	= raid6_takeover,
 	.change_consistency_policy = raid5_change_consistency_policy,
+	.prepare_suspend = raid5_prepare_suspend,
 };
 static struct md_personality raid5_personality =
 {
@@ -8956,6 +8984,7 @@ static struct md_personality raid5_personality =
 	.quiesce	= raid5_quiesce,
 	.takeover	= raid5_takeover,
 	.change_consistency_policy = raid5_change_consistency_policy,
+	.prepare_suspend = raid5_prepare_suspend,
 };
 
 static struct md_personality raid4_personality =
@@ -8981,6 +9010,7 @@ static struct md_personality raid4_personality =
 	.quiesce	= raid5_quiesce,
 	.takeover	= raid4_takeover,
 	.change_consistency_policy = raid5_change_consistency_policy,
+	.prepare_suspend = raid5_prepare_suspend,
 };
 
 static int __init raid5_init(void)
-- 
2.39.2

Re: [PATCH v2 00/11] dm-raid: fix v6.7 regressions

[Xiao Ni]

On Wed, Jan 24, 2024 at 5:18 PM Yu Kuai <yukuai3@huawei.com> wrote:
>
> First regression related to stop sync thread:
>
> The lifetime of sync_thread is designed as following:
>
> 1) Decide want to start sync_thread, set MD_RECOVERY_NEEDED, and wake up
> daemon thread;
> 2) Daemon thread detect that MD_RECOVERY_NEEDED is set, then set
> MD_RECOVERY_RUNNING and register sync_thread;
> 3) Execute md_do_sync() for the actual work, if it's done or
> interrupted, it will set MD_RECOVERY_DONE and wake up daemone thread;
> 4) Daemon thread detect that MD_RECOVERY_DONE is set, then clear
> MD_RECOVERY_RUNNING and unregister sync_thread;
>
> In v6.7, we fix md/raid to follow this design by commit f52f5c71f3d4
> ("md: fix stopping sync thread"), however, dm-raid is not considered at
> that time, and following test will hang:

Hi Kuai

Thanks very much for the patch set. I reported the dm raid deadlock
when stopping dm raid and we had the patch set "[PATCH v5 md-fixes
0/3] md: fix stopping sync thread" which has patch f52f5c71f3d4. So we
indeed considered dm-raid that time. Because we want to resolve the
deadlock problem. I re-look patch f52f5c71f3d4. It has two major
changes. One is to use a common function stop_sync_thread for stopping
sync thread. This can fix the deadlock problem. The second change
changes the way to reap sync thread. mdraid and dmraid reap sync
thread in __md_stop_writes. So the patch looks overweight.

Before f52f5c71f3d4  do_md_stop release reconfig_mutex before waiting
sync_thread to finish. So there should not be the deadlock problem
which has been fixed in 130443d60b1b ("md: refactor
idle/frozen_sync_thread() to fix deadlock"). So we only need to change
__md_stop_writes to stop sync thread like do_md_stop and reap sync
thread directly.

Maybe this can avoid deadlock? I'll try this way and give the test result.
>
> shell/integrity-caching.sh
> shell/lvconvert-raid-reshape.sh
>
> This patch set fix the broken test by patch 1-4;
>  - patch 1 fix that step 4) is broken by suspended array;
>  - patch 2 fix that step 4) is broken by read-only array;
>  - patch 3 fix that step 3) is broken that md_do_sync() doesn't set
>  MD_RECOVERY_DONE; Noted that this patch will introdece new problem that
>  data will be corrupted, which will be fixed in later patches.
>  - patch 4 fix that setp 1) is broken that sync_thread is register and
>  MD_RECOVERY_RUNNING is set directly;
>
> With patch 1-4, the above test won't hang anymore, however, the test
> will still fail and complain that ext4 is corrupted;

For patch3, as I mentioned today, the root cause is
dm-raid->rs_start_reshape sets MD_RECOVERY_WAIT. So md_do_sync returns
when MD_RECOVERY_WAIT is set. It's the reason why dm-raid can't stop
sync thread when start a new reshape. . The way in patch3 looks like a
workaround. We need to figure out if dm raid really needs to set
MD_RECOVERY_WAIT. Because now we stop sync thread in an asynchronous
way. So the deadlock problem which was fixed in 644e2537f (dm raid:
fix stripe adding reshape deadlock) may disappear. Maybe we can revert
the patch.

Best Regards
Xiao

>
> Second regression related to frozen sync thread:
>
> Noted that for raid456, if reshape is interrupted, then call
> "pers->start_reshape" will corrupt data. This is because dm-raid rely on
> md_do_sync() doesn't set MD_RECOVERY_DONE so that new sync_thread won't
> be registered, and patch 3 just break this.
>
>  - Patch 5-6 fix this problem by interrupting reshape and frozen
>  sync_thread in dm_suspend(), then unfrozen and continue reshape in
> dm_resume(). It's verified that dm-raid tests won't complain that
> ext4 is corrupted anymore.
>  - Patch 7 fix the problem that raid_message() call
>  md_reap_sync_thread() directly, without holding 'reconfig_mutex'.
>
> Last regression related to dm-raid456 IO concurrent with reshape:
>
> For raid456, if reshape is still in progress, then IO across reshape
> position will wait for reshape to make progress. However, for dm-raid,
> in following cases reshape will never make progress hence IO will hang:
>
> 1) the array is read-only;
> 2) MD_RECOVERY_WAIT is set;
> 3) MD_RECOVERY_FROZEN is set;
>
> After commit c467e97f079f ("md/raid6: use valid sector values to determine
> if an I/O should wait on the reshape") fix the problem that IO across
> reshape position doesn't wait for reshape, the dm-raid test
> shell/lvconvert-raid-reshape.sh start to hang at raid5_make_request().
>
> For md/raid, the problem doesn't exist because:
>
> 1) If array is read-only, it can switch to read-write by ioctl/sysfs;
> 2) md/raid never set MD_RECOVERY_WAIT;
> 3) If MD_RECOVERY_FROZEN is set, mddev_suspend() doesn't hold
>    'reconfig_mutex' anymore, it can be cleared and reshape can continue by
>    sysfs api 'sync_action'.
>
> However, I'm not sure yet how to avoid the problem in dm-raid yet.
>
>  - patch 9-11 fix this problem by detecting the above 3 cases in
>  dm_suspend(), and fail those IO directly.
>
> If user really meet the IO error, then it means they're reading the wrong
> data before c467e97f079f. And it's safe to read/write the array after
> reshape make progress successfully.
>
> Tests:
>
> I already run the following two tests many times and verified that they
> won't fail anymore:
>
> shell/integrity-caching.sh
> shell/lvconvert-raid-reshape.sh
>
> For other tests, I'm still running. However, I'm sending this patchset
> in case people think the fixes is not appropriate. Running the full
> tests will cost lots of time in my VM, and I'll update full test results
> soon.
>
> Yu Kuai (11):
>   md: don't ignore suspended array in md_check_recovery()
>   md: don't ignore read-only array in md_check_recovery()
>   md: make sure md_do_sync() will set MD_RECOVERY_DONE
>   md: don't register sync_thread for reshape directly
>   md: export helpers to stop sync_thread
>   dm-raid: really frozen sync_thread during suspend
>   md/dm-raid: don't call md_reap_sync_thread() directly
>   dm-raid: remove mddev_suspend/resume()
>   dm-raid: add a new helper prepare_suspend() in md_personality
>   md: export helper md_is_rdwr()
>   md/raid456: fix a deadlock for dm-raid456 while io concurrent with
>     reshape
>
>  drivers/md/dm-raid.c |  76 +++++++++++++++++++++----------
>  drivers/md/md.c      | 104 ++++++++++++++++++++++++++++---------------
>  drivers/md/md.h      |  16 +++++++
>  drivers/md/raid10.c  |  16 +------
>  drivers/md/raid5.c   |  61 +++++++++++++------------
>  5 files changed, 171 insertions(+), 102 deletions(-)
>
> --
> 2.39.2
>

Re: [PATCH v2 00/11] dm-raid: fix v6.7 regressions

[Song Liu]

On Wed, Jan 24, 2024 at 1:18 AM Yu Kuai <yukuai3@huawei.com> wrote:
>
> First regression related to stop sync thread:
>
> The lifetime of sync_thread is designed as following:
>
> 1) Decide want to start sync_thread, set MD_RECOVERY_NEEDED, and wake up
> daemon thread;
> 2) Daemon thread detect that MD_RECOVERY_NEEDED is set, then set
> MD_RECOVERY_RUNNING and register sync_thread;
> 3) Execute md_do_sync() for the actual work, if it's done or
> interrupted, it will set MD_RECOVERY_DONE and wake up daemone thread;
> 4) Daemon thread detect that MD_RECOVERY_DONE is set, then clear
> MD_RECOVERY_RUNNING and unregister sync_thread;
>
> In v6.7, we fix md/raid to follow this design by commit f52f5c71f3d4
> ("md: fix stopping sync thread"), however, dm-raid is not considered at
> that time, and following test will hang:
>
> shell/integrity-caching.sh
> shell/lvconvert-raid-reshape.sh
>
> This patch set fix the broken test by patch 1-4;
>  - patch 1 fix that step 4) is broken by suspended array;
>  - patch 2 fix that step 4) is broken by read-only array;
>  - patch 3 fix that step 3) is broken that md_do_sync() doesn't set
>  MD_RECOVERY_DONE; Noted that this patch will introdece new problem that
>  data will be corrupted, which will be fixed in later patches.
>  - patch 4 fix that setp 1) is broken that sync_thread is register and
>  MD_RECOVERY_RUNNING is set directly;
>
> With patch 1-4, the above test won't hang anymore, however, the test
> will still fail and complain that ext4 is corrupted;
>
> Second regression related to frozen sync thread:
>
> Noted that for raid456, if reshape is interrupted, then call
> "pers->start_reshape" will corrupt data. This is because dm-raid rely on
> md_do_sync() doesn't set MD_RECOVERY_DONE so that new sync_thread won't
> be registered, and patch 3 just break this.
>
>  - Patch 5-6 fix this problem by interrupting reshape and frozen
>  sync_thread in dm_suspend(), then unfrozen and continue reshape in
> dm_resume(). It's verified that dm-raid tests won't complain that
> ext4 is corrupted anymore.
>  - Patch 7 fix the problem that raid_message() call
>  md_reap_sync_thread() directly, without holding 'reconfig_mutex'.
>
> Last regression related to dm-raid456 IO concurrent with reshape:
>
> For raid456, if reshape is still in progress, then IO across reshape
> position will wait for reshape to make progress. However, for dm-raid,
> in following cases reshape will never make progress hence IO will hang:
>
> 1) the array is read-only;
> 2) MD_RECOVERY_WAIT is set;
> 3) MD_RECOVERY_FROZEN is set;
>
> After commit c467e97f079f ("md/raid6: use valid sector values to determine
> if an I/O should wait on the reshape") fix the problem that IO across
> reshape position doesn't wait for reshape, the dm-raid test
> shell/lvconvert-raid-reshape.sh start to hang at raid5_make_request().
>
> For md/raid, the problem doesn't exist because:
>
> 1) If array is read-only, it can switch to read-write by ioctl/sysfs;
> 2) md/raid never set MD_RECOVERY_WAIT;
> 3) If MD_RECOVERY_FROZEN is set, mddev_suspend() doesn't hold
>    'reconfig_mutex' anymore, it can be cleared and reshape can continue by
>    sysfs api 'sync_action'.
>
> However, I'm not sure yet how to avoid the problem in dm-raid yet.
>
>  - patch 9-11 fix this problem by detecting the above 3 cases in
>  dm_suspend(), and fail those IO directly.
>
> If user really meet the IO error, then it means they're reading the wrong
> data before c467e97f079f. And it's safe to read/write the array after
> reshape make progress successfully.

c467e97f079f got back ported to stable kernels (6.6.13, for example). We
will need some fixes for them (to fix shell/lvconvert-raid-reshape.sh).

Mikulas and folks, please help review the analysis above and dm-raid
changes. The failure was triggered by c467e97f079f. However, the commit
is doing the right thing, so we really shouldn't revert it.

>
> Tests:
>
> I already run the following two tests many times and verified that they
> won't fail anymore:
>
> shell/integrity-caching.sh
> shell/lvconvert-raid-reshape.sh

shell/lvconvert-raid-reshape-linear_to_raid6-single-type.sh is failing
with upstream + this set. (I need to fix some trivial compilation errors,
which are probably last minute typos).

Thanks,
Song

Re: [PATCH v2 00/11] dm-raid: fix v6.7 regressions

[Xiao Ni]

On Wed, Jan 24, 2024 at 8:19 PM Xiao Ni <xni@redhat.com> wrote:
>
> On Wed, Jan 24, 2024 at 5:18 PM Yu Kuai <yukuai3@huawei.com> wrote:
> >
> > First regression related to stop sync thread:
> >
> > The lifetime of sync_thread is designed as following:
> >
> > 1) Decide want to start sync_thread, set MD_RECOVERY_NEEDED, and wake up
> > daemon thread;
> > 2) Daemon thread detect that MD_RECOVERY_NEEDED is set, then set
> > MD_RECOVERY_RUNNING and register sync_thread;
> > 3) Execute md_do_sync() for the actual work, if it's done or
> > interrupted, it will set MD_RECOVERY_DONE and wake up daemone thread;
> > 4) Daemon thread detect that MD_RECOVERY_DONE is set, then clear
> > MD_RECOVERY_RUNNING and unregister sync_thread;
> >
> > In v6.7, we fix md/raid to follow this design by commit f52f5c71f3d4
> > ("md: fix stopping sync thread"), however, dm-raid is not considered at
> > that time, and following test will hang:
>
> Hi Kuai
>
> Thanks very much for the patch set. I reported the dm raid deadlock
> when stopping dm raid and we had the patch set "[PATCH v5 md-fixes
> 0/3] md: fix stopping sync thread" which has patch f52f5c71f3d4. So we
> indeed considered dm-raid that time. Because we want to resolve the
> deadlock problem. I re-look patch f52f5c71f3d4. It has two major
> changes. One is to use a common function stop_sync_thread for stopping
> sync thread. This can fix the deadlock problem. The second change
> changes the way to reap sync thread. mdraid and dmraid reap sync
> thread in __md_stop_writes. So the patch looks overweight.
>
> Before f52f5c71f3d4  do_md_stop release reconfig_mutex before waiting
> sync_thread to finish. So there should not be the deadlock problem
> which has been fixed in 130443d60b1b ("md: refactor
> idle/frozen_sync_thread() to fix deadlock"). So we only need to change
> __md_stop_writes to stop sync thread like do_md_stop and reap sync
> thread directly.
>
> Maybe this can avoid deadlock? I'll try this way and give the test result.

Please ignore my last comment. There is something wrong. Only dmraid
calls reap_sync_thread directly in __md_stop_writes before.

130443d60b1b ("md: refactor idle/frozen_sync_thread() to fix
deadlock") fixes a deadlock problem. sync io is running and user io
comes. sync io needs to wait user io. user io needs to update
suerblock and it needs mddev->reconfig_mutex. But user action happens
with this lock to stop sync thread. So this is the deadlock. For
dmraid, it doesn't update superblock like md. I'm not sure if dmraid
has such deadlock problem. If not, dmraid can call md_reap_sync_thread
directly, right?

> >
> > shell/integrity-caching.sh
> > shell/lvconvert-raid-reshape.sh
> >
> > This patch set fix the broken test by patch 1-4;
> >  - patch 1 fix that step 4) is broken by suspended array;
> >  - patch 2 fix that step 4) is broken by read-only array;
> >  - patch 3 fix that step 3) is broken that md_do_sync() doesn't set
> >  MD_RECOVERY_DONE; Noted that this patch will introdece new problem that
> >  data will be corrupted, which will be fixed in later patches.
> >  - patch 4 fix that setp 1) is broken that sync_thread is register and
> >  MD_RECOVERY_RUNNING is set directly;
> >
> > With patch 1-4, the above test won't hang anymore, however, the test
> > will still fail and complain that ext4 is corrupted;
>
> For patch3, as I mentioned today, the root cause is
> dm-raid->rs_start_reshape sets MD_RECOVERY_WAIT. So md_do_sync returns
> when MD_RECOVERY_WAIT is set. It's the reason why dm-raid can't stop
> sync thread when start a new reshape. . The way in patch3 looks like a
> workaround. We need to figure out if dm raid really needs to set
> MD_RECOVERY_WAIT. Because now we stop sync thread in an asynchronous
> way. So the deadlock problem which was fixed in 644e2537f (dm raid:
> fix stripe adding reshape deadlock) may disappear. Maybe we can revert
> the patch.

After talking with Heinz, he mentioned dmraid needs this bit to avoid
md sync thread to start during reshape. So patch3 looks good.

Best Regards
Xiao
>
> Best Regards
> Xiao
>
> >
> > Second regression related to frozen sync thread:
> >
> > Noted that for raid456, if reshape is interrupted, then call
> > "pers->start_reshape" will corrupt data. This is because dm-raid rely on
> > md_do_sync() doesn't set MD_RECOVERY_DONE so that new sync_thread won't
> > be registered, and patch 3 just break this.
> >
> >  - Patch 5-6 fix this problem by interrupting reshape and frozen
> >  sync_thread in dm_suspend(), then unfrozen and continue reshape in
> > dm_resume(). It's verified that dm-raid tests won't complain that
> > ext4 is corrupted anymore.
> >  - Patch 7 fix the problem that raid_message() call
> >  md_reap_sync_thread() directly, without holding 'reconfig_mutex'.
> >
> > Last regression related to dm-raid456 IO concurrent with reshape:
> >
> > For raid456, if reshape is still in progress, then IO across reshape
> > position will wait for reshape to make progress. However, for dm-raid,
> > in following cases reshape will never make progress hence IO will hang:
> >
> > 1) the array is read-only;
> > 2) MD_RECOVERY_WAIT is set;
> > 3) MD_RECOVERY_FROZEN is set;
> >
> > After commit c467e97f079f ("md/raid6: use valid sector values to determine
> > if an I/O should wait on the reshape") fix the problem that IO across
> > reshape position doesn't wait for reshape, the dm-raid test
> > shell/lvconvert-raid-reshape.sh start to hang at raid5_make_request().
> >
> > For md/raid, the problem doesn't exist because:
> >
> > 1) If array is read-only, it can switch to read-write by ioctl/sysfs;
> > 2) md/raid never set MD_RECOVERY_WAIT;
> > 3) If MD_RECOVERY_FROZEN is set, mddev_suspend() doesn't hold
> >    'reconfig_mutex' anymore, it can be cleared and reshape can continue by
> >    sysfs api 'sync_action'.
> >
> > However, I'm not sure yet how to avoid the problem in dm-raid yet.
> >
> >  - patch 9-11 fix this problem by detecting the above 3 cases in
> >  dm_suspend(), and fail those IO directly.
> >
> > If user really meet the IO error, then it means they're reading the wrong
> > data before c467e97f079f. And it's safe to read/write the array after
> > reshape make progress successfully.
> >
> > Tests:
> >
> > I already run the following two tests many times and verified that they
> > won't fail anymore:
> >
> > shell/integrity-caching.sh
> > shell/lvconvert-raid-reshape.sh
> >
> > For other tests, I'm still running. However, I'm sending this patchset
> > in case people think the fixes is not appropriate. Running the full
> > tests will cost lots of time in my VM, and I'll update full test results
> > soon.
> >
> > Yu Kuai (11):
> >   md: don't ignore suspended array in md_check_recovery()
> >   md: don't ignore read-only array in md_check_recovery()
> >   md: make sure md_do_sync() will set MD_RECOVERY_DONE
> >   md: don't register sync_thread for reshape directly
> >   md: export helpers to stop sync_thread
> >   dm-raid: really frozen sync_thread during suspend
> >   md/dm-raid: don't call md_reap_sync_thread() directly
> >   dm-raid: remove mddev_suspend/resume()
> >   dm-raid: add a new helper prepare_suspend() in md_personality
> >   md: export helper md_is_rdwr()
> >   md/raid456: fix a deadlock for dm-raid456 while io concurrent with
> >     reshape
> >
> >  drivers/md/dm-raid.c |  76 +++++++++++++++++++++----------
> >  drivers/md/md.c      | 104 ++++++++++++++++++++++++++++---------------
> >  drivers/md/md.h      |  16 +++++++
> >  drivers/md/raid10.c  |  16 +------
> >  drivers/md/raid5.c   |  61 +++++++++++++------------
> >  5 files changed, 171 insertions(+), 102 deletions(-)
> >
> > --
> > 2.39.2
> >

Re: [PATCH v2 00/11] dm-raid: fix v6.7 regressions

[Yu Kuai]

Hi,

在 2024/01/25 8:46, Song Liu 写道:
> On Wed, Jan 24, 2024 at 1:18 AM Yu Kuai <yukuai3@huawei.com> wrote:
>>
>> First regression related to stop sync thread:
>>
>> The lifetime of sync_thread is designed as following:
>>
>> 1) Decide want to start sync_thread, set MD_RECOVERY_NEEDED, and wake up
>> daemon thread;
>> 2) Daemon thread detect that MD_RECOVERY_NEEDED is set, then set
>> MD_RECOVERY_RUNNING and register sync_thread;
>> 3) Execute md_do_sync() for the actual work, if it's done or
>> interrupted, it will set MD_RECOVERY_DONE and wake up daemone thread;
>> 4) Daemon thread detect that MD_RECOVERY_DONE is set, then clear
>> MD_RECOVERY_RUNNING and unregister sync_thread;
>>
>> In v6.7, we fix md/raid to follow this design by commit f52f5c71f3d4
>> ("md: fix stopping sync thread"), however, dm-raid is not considered at
>> that time, and following test will hang:
>>
>> shell/integrity-caching.sh
>> shell/lvconvert-raid-reshape.sh
>>
>> This patch set fix the broken test by patch 1-4;
>>   - patch 1 fix that step 4) is broken by suspended array;
>>   - patch 2 fix that step 4) is broken by read-only array;
>>   - patch 3 fix that step 3) is broken that md_do_sync() doesn't set
>>   MD_RECOVERY_DONE; Noted that this patch will introdece new problem that
>>   data will be corrupted, which will be fixed in later patches.
>>   - patch 4 fix that setp 1) is broken that sync_thread is register and
>>   MD_RECOVERY_RUNNING is set directly;
>>
>> With patch 1-4, the above test won't hang anymore, however, the test
>> will still fail and complain that ext4 is corrupted;
>>
>> Second regression related to frozen sync thread:
>>
>> Noted that for raid456, if reshape is interrupted, then call
>> "pers->start_reshape" will corrupt data. This is because dm-raid rely on
>> md_do_sync() doesn't set MD_RECOVERY_DONE so that new sync_thread won't
>> be registered, and patch 3 just break this.
>>
>>   - Patch 5-6 fix this problem by interrupting reshape and frozen
>>   sync_thread in dm_suspend(), then unfrozen and continue reshape in
>> dm_resume(). It's verified that dm-raid tests won't complain that
>> ext4 is corrupted anymore.
>>   - Patch 7 fix the problem that raid_message() call
>>   md_reap_sync_thread() directly, without holding 'reconfig_mutex'.
>>
>> Last regression related to dm-raid456 IO concurrent with reshape:
>>
>> For raid456, if reshape is still in progress, then IO across reshape
>> position will wait for reshape to make progress. However, for dm-raid,
>> in following cases reshape will never make progress hence IO will hang:
>>
>> 1) the array is read-only;
>> 2) MD_RECOVERY_WAIT is set;
>> 3) MD_RECOVERY_FROZEN is set;
>>
>> After commit c467e97f079f ("md/raid6: use valid sector values to determine
>> if an I/O should wait on the reshape") fix the problem that IO across
>> reshape position doesn't wait for reshape, the dm-raid test
>> shell/lvconvert-raid-reshape.sh start to hang at raid5_make_request().
>>
>> For md/raid, the problem doesn't exist because:
>>
>> 1) If array is read-only, it can switch to read-write by ioctl/sysfs;
>> 2) md/raid never set MD_RECOVERY_WAIT;
>> 3) If MD_RECOVERY_FROZEN is set, mddev_suspend() doesn't hold
>>     'reconfig_mutex' anymore, it can be cleared and reshape can continue by
>>     sysfs api 'sync_action'.
>>
>> However, I'm not sure yet how to avoid the problem in dm-raid yet.
>>
>>   - patch 9-11 fix this problem by detecting the above 3 cases in
>>   dm_suspend(), and fail those IO directly.
>>
>> If user really meet the IO error, then it means they're reading the wrong
>> data before c467e97f079f. And it's safe to read/write the array after
>> reshape make progress successfully.
> 
> c467e97f079f got back ported to stable kernels (6.6.13, for example). We
> will need some fixes for them (to fix shell/lvconvert-raid-reshape.sh).
> 
> Mikulas and folks, please help review the analysis above and dm-raid
> changes. The failure was triggered by c467e97f079f. However, the commit
> is doing the right thing, so we really shouldn't revert it.
> 
>>
>> Tests:
>>
>> I already run the following two tests many times and verified that they
>> won't fail anymore:
>>
>> shell/integrity-caching.sh
>> shell/lvconvert-raid-reshape.sh
> 
> shell/lvconvert-raid-reshape-linear_to_raid6-single-type.sh is failing
> with upstream + this set. (I need to fix some trivial compilation errors,
> which are probably last minute typos).

I'm running test for this patchset overnight in my vm, and this test has
been ran for 9 times and all passed. Looks like I can't reporduce this
in my vm.

Thanks,
Kuai

> 
> Thanks,
> Song
> 
> .
> 

Re: [PATCH v2 00/11] dm-raid: fix v6.7 regressions

[Yu Kuai]

Hi,

在 2024/01/25 8:50, Xiao Ni 写道:
> On Wed, Jan 24, 2024 at 8:19 PM Xiao Ni <xni@redhat.com> wrote:
>>
>> On Wed, Jan 24, 2024 at 5:18 PM Yu Kuai <yukuai3@huawei.com> wrote:
>>>
>>> First regression related to stop sync thread:
>>>
>>> The lifetime of sync_thread is designed as following:
>>>
>>> 1) Decide want to start sync_thread, set MD_RECOVERY_NEEDED, and wake up
>>> daemon thread;
>>> 2) Daemon thread detect that MD_RECOVERY_NEEDED is set, then set
>>> MD_RECOVERY_RUNNING and register sync_thread;
>>> 3) Execute md_do_sync() for the actual work, if it's done or
>>> interrupted, it will set MD_RECOVERY_DONE and wake up daemone thread;
>>> 4) Daemon thread detect that MD_RECOVERY_DONE is set, then clear
>>> MD_RECOVERY_RUNNING and unregister sync_thread;
>>>
>>> In v6.7, we fix md/raid to follow this design by commit f52f5c71f3d4
>>> ("md: fix stopping sync thread"), however, dm-raid is not considered at
>>> that time, and following test will hang:
>>
>> Hi Kuai
>>
>> Thanks very much for the patch set. I reported the dm raid deadlock
>> when stopping dm raid and we had the patch set "[PATCH v5 md-fixes
>> 0/3] md: fix stopping sync thread" which has patch f52f5c71f3d4. So we
>> indeed considered dm-raid that time. Because we want to resolve the
>> deadlock problem. I re-look patch f52f5c71f3d4. It has two major
>> changes. One is to use a common function stop_sync_thread for stopping
>> sync thread. This can fix the deadlock problem. The second change
>> changes the way to reap sync thread. mdraid and dmraid reap sync
>> thread in __md_stop_writes. So the patch looks overweight.
>>
>> Before f52f5c71f3d4  do_md_stop release reconfig_mutex before waiting
>> sync_thread to finish. So there should not be the deadlock problem
>> which has been fixed in 130443d60b1b ("md: refactor
>> idle/frozen_sync_thread() to fix deadlock"). So we only need to change
>> __md_stop_writes to stop sync thread like do_md_stop and reap sync
>> thread directly.
>>
>> Maybe this can avoid deadlock? I'll try this way and give the test result.
> 
> Please ignore my last comment. There is something wrong. Only dmraid
> calls reap_sync_thread directly in __md_stop_writes before.
> 
> 130443d60b1b ("md: refactor idle/frozen_sync_thread() to fix
> deadlock") fixes a deadlock problem. sync io is running and user io
> comes. sync io needs to wait user io. user io needs to update
> suerblock and it needs mddev->reconfig_mutex. But user action happens
> with this lock to stop sync thread. So this is the deadlock. For
> dmraid, it doesn't update superblock like md. I'm not sure if dmraid
> has such deadlock problem. If not, dmraid can call md_reap_sync_thread
> directly, right?

Yes, the deadlock problem is because holding the lock to call
md_reap_sync_thread() directly will block daemon thread to handle IO.

However, for dm-raid superblock, I'm confused here, the code looks like
md superblock is still there, for example:

rs_update_sbs
  set_bit(MD_SB_CHANGE_DEVS, &mddev->sb_flags);
  md_update_sb(mddev, 1);

And the code in raid1/10/5 to update md superblock doesn't have any
special handling for dm-raid. Or am I missing something here?

Thanks,
Kuai

> 
>>>
>>> shell/integrity-caching.sh
>>> shell/lvconvert-raid-reshape.sh
>>>
>>> This patch set fix the broken test by patch 1-4;
>>>   - patch 1 fix that step 4) is broken by suspended array;
>>>   - patch 2 fix that step 4) is broken by read-only array;
>>>   - patch 3 fix that step 3) is broken that md_do_sync() doesn't set
>>>   MD_RECOVERY_DONE; Noted that this patch will introdece new problem that
>>>   data will be corrupted, which will be fixed in later patches.
>>>   - patch 4 fix that setp 1) is broken that sync_thread is register and
>>>   MD_RECOVERY_RUNNING is set directly;
>>>
>>> With patch 1-4, the above test won't hang anymore, however, the test
>>> will still fail and complain that ext4 is corrupted;
>>
>> For patch3, as I mentioned today, the root cause is
>> dm-raid->rs_start_reshape sets MD_RECOVERY_WAIT. So md_do_sync returns
>> when MD_RECOVERY_WAIT is set. It's the reason why dm-raid can't stop
>> sync thread when start a new reshape. . The way in patch3 looks like a
>> workaround. We need to figure out if dm raid really needs to set
>> MD_RECOVERY_WAIT. Because now we stop sync thread in an asynchronous
>> way. So the deadlock problem which was fixed in 644e2537f (dm raid:
>> fix stripe adding reshape deadlock) may disappear. Maybe we can revert
>> the patch.

In fact, the flag MD_RECOVERY_WAIT looks like a workaround to prevent
new sync thread to start to me. I actually frozen the sync_thread during
suspend, and prevent user to unfrozen it from raid_message() in patch 6.
I think this way is better and probably MD_RECOVERY_WAIT can be removed.

> 
> After talking with Heinz, he mentioned dmraid needs this bit to avoid
> md sync thread to start during reshape. So patch3 looks good.
> 
> Best Regards
> Xiao
>>
>> Best Regards
>> Xiao
>>
>>>
>>> Second regression related to frozen sync thread:
>>>
>>> Noted that for raid456, if reshape is interrupted, then call
>>> "pers->start_reshape" will corrupt data. This is because dm-raid rely on
>>> md_do_sync() doesn't set MD_RECOVERY_DONE so that new sync_thread won't
>>> be registered, and patch 3 just break this.
>>>
>>>   - Patch 5-6 fix this problem by interrupting reshape and frozen
>>>   sync_thread in dm_suspend(), then unfrozen and continue reshape in
>>> dm_resume(). It's verified that dm-raid tests won't complain that
>>> ext4 is corrupted anymore.
>>>   - Patch 7 fix the problem that raid_message() call
>>>   md_reap_sync_thread() directly, without holding 'reconfig_mutex'.
>>>
>>> Last regression related to dm-raid456 IO concurrent with reshape:
>>>
>>> For raid456, if reshape is still in progress, then IO across reshape
>>> position will wait for reshape to make progress. However, for dm-raid,
>>> in following cases reshape will never make progress hence IO will hang:
>>>
>>> 1) the array is read-only;
>>> 2) MD_RECOVERY_WAIT is set;
>>> 3) MD_RECOVERY_FROZEN is set;
>>>
>>> After commit c467e97f079f ("md/raid6: use valid sector values to determine
>>> if an I/O should wait on the reshape") fix the problem that IO across
>>> reshape position doesn't wait for reshape, the dm-raid test
>>> shell/lvconvert-raid-reshape.sh start to hang at raid5_make_request().
>>>
>>> For md/raid, the problem doesn't exist because:
>>>
>>> 1) If array is read-only, it can switch to read-write by ioctl/sysfs;
>>> 2) md/raid never set MD_RECOVERY_WAIT;
>>> 3) If MD_RECOVERY_FROZEN is set, mddev_suspend() doesn't hold
>>>     'reconfig_mutex' anymore, it can be cleared and reshape can continue by
>>>     sysfs api 'sync_action'.
>>>
>>> However, I'm not sure yet how to avoid the problem in dm-raid yet.
>>>
>>>   - patch 9-11 fix this problem by detecting the above 3 cases in
>>>   dm_suspend(), and fail those IO directly.
>>>
>>> If user really meet the IO error, then it means they're reading the wrong
>>> data before c467e97f079f. And it's safe to read/write the array after
>>> reshape make progress successfully.
>>>
>>> Tests:
>>>
>>> I already run the following two tests many times and verified that they
>>> won't fail anymore:
>>>
>>> shell/integrity-caching.sh
>>> shell/lvconvert-raid-reshape.sh
>>>
>>> For other tests, I'm still running. However, I'm sending this patchset
>>> in case people think the fixes is not appropriate. Running the full
>>> tests will cost lots of time in my VM, and I'll update full test results
>>> soon.
>>>
>>> Yu Kuai (11):
>>>    md: don't ignore suspended array in md_check_recovery()
>>>    md: don't ignore read-only array in md_check_recovery()
>>>    md: make sure md_do_sync() will set MD_RECOVERY_DONE
>>>    md: don't register sync_thread for reshape directly
>>>    md: export helpers to stop sync_thread
>>>    dm-raid: really frozen sync_thread during suspend
>>>    md/dm-raid: don't call md_reap_sync_thread() directly
>>>    dm-raid: remove mddev_suspend/resume()
>>>    dm-raid: add a new helper prepare_suspend() in md_personality
>>>    md: export helper md_is_rdwr()
>>>    md/raid456: fix a deadlock for dm-raid456 while io concurrent with
>>>      reshape
>>>
>>>   drivers/md/dm-raid.c |  76 +++++++++++++++++++++----------
>>>   drivers/md/md.c      | 104 ++++++++++++++++++++++++++++---------------
>>>   drivers/md/md.h      |  16 +++++++
>>>   drivers/md/raid10.c  |  16 +------
>>>   drivers/md/raid5.c   |  61 +++++++++++++------------
>>>   5 files changed, 171 insertions(+), 102 deletions(-)
>>>
>>> --
>>> 2.39.2
>>>
> 
> .
> 

Re: [PATCH v2 00/11] dm-raid: fix v6.7 regressions

[Song Liu]

[-- Attachment #1: Type: text/plain, Size: 666 bytes --]

On Wed, Jan 24, 2024 at 5:09 PM Yu Kuai <yukuai1@huaweicloud.com> wrote:
>
[...]
> >>
> >> shell/integrity-caching.sh
> >> shell/lvconvert-raid-reshape.sh
> >
> > shell/lvconvert-raid-reshape-linear_to_raid6-single-type.sh is failing
> > with upstream + this set. (I need to fix some trivial compilation errors,
> > which are probably last minute typos).
>
> I'm running test for this patchset overnight in my vm, and this test has
> been ran for 9 times and all passed. Looks like I can't reporduce this
> in my vm.

Hmm.. maybe it is caused by different .config? Attached is the
output from the test and the config file I used.

Thanks,
Song

[-- Attachment #2: config --]
[-- Type: application/octet-stream, Size: 128749 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86 6.8.0-rc1 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="gcc (GCC) 12.2.1 20221121 (Red Hat 12.2.1-7)"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=120201
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23800
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23800
CONFIG_LLD_VERSION=0
CONFIG_CC_CAN_LINK=y
CONFIG_CC_CAN_LINK_STATIC=y
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_CC_HAS_ASM_GOTO_TIED_OUTPUT=y
CONFIG_TOOLS_SUPPORT_RELR=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=124
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_HAVE_KERNEL_ZSTD=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
# CONFIG_KERNEL_ZSTD is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_SYSVIPC_COMPAT=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_WATCH_QUEUE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_USELIB=y
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_IRQ_MSI_IOMMU=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem

CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y
# CONFIG_TIME_KUNIT_TEST is not set
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_IDLE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
# CONFIG_NO_HZ_IDLE is not set
CONFIG_NO_HZ_FULL=y
CONFIG_CONTEXT_TRACKING_USER=y
# CONFIG_CONTEXT_TRACKING_USER_FORCE is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_CLOCKSOURCE_WATCHDOG_MAX_SKEW_US=125
# end of Timers subsystem

CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y

#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
CONFIG_BPF_JIT=y
# CONFIG_BPF_JIT_ALWAYS_ON is not set
CONFIG_BPF_JIT_DEFAULT_ON=y
# CONFIG_BPF_UNPRIV_DEFAULT_OFF is not set
CONFIG_USERMODE_DRIVER=y
CONFIG_BPF_PRELOAD=y
CONFIG_BPF_PRELOAD_UMD=m
CONFIG_BPF_LSM=y
# end of BPF subsystem

CONFIG_PREEMPT_BUILD=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_PREEMPTION=y
CONFIG_PREEMPT_DYNAMIC=y
# CONFIG_SCHED_CORE is not set

#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting

CONFIG_CPU_ISOLATION=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_TASKS_RCU=y
CONFIG_TASKS_RUDE_RCU=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_RCU_NOCB_CPU=y
# CONFIG_RCU_NOCB_CPU_DEFAULT_ALL is not set
# CONFIG_RCU_LAZY is not set
# end of RCU Subsystem

CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_IKHEADERS=y
CONFIG_LOG_BUF_SHIFT=24
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
# CONFIG_PRINTK_INDEX is not set
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y

#
# Scheduler features
#
# CONFIG_UCLAMP_TASK is not set
# end of Scheduler features

CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CC_HAS_INT128=y
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_GCC11_NO_ARRAY_BOUNDS=y
CONFIG_CC_NO_ARRAY_BOUNDS=y
CONFIG_GCC11_NO_STRINGOP_OVERFLOW=y
CONFIG_CC_STRINGOP_OVERFLOW=y
CONFIG_ARCH_SUPPORTS_INT128=y
# CONFIG_NUMA_BALANCING is not set
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
# CONFIG_CGROUP_FAVOR_DYNMODS is not set
CONFIG_MEMCG=y
CONFIG_MEMCG_KMEM=y
# CONFIG_BLK_CGROUP is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_SCHED_MM_CID=y
# CONFIG_CGROUP_PIDS is not set
# CONFIG_CGROUP_RDMA is not set
CONFIG_CGROUP_FREEZER=y
# CONFIG_CGROUP_HUGETLB is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_BPF=y
# CONFIG_CGROUP_MISC is not set
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_TIME_NS=y
CONFIG_IPC_NS=y
# CONFIG_USER_NS is not set
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_SCHED_AUTOGROUP=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
# CONFIG_RD_LZ4 is not set
CONFIG_RD_ZSTD=y
# CONFIG_BOOT_CONFIG is not set
CONFIG_INITRAMFS_PRESERVE_MTIME=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_LD_ORPHAN_WARN=y
CONFIG_LD_ORPHAN_WARN_LEVEL="warn"
CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
# CONFIG_FHANDLE is not set
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KCMP=y
CONFIG_RSEQ=y
# CONFIG_DEBUG_RSEQ is not set
CONFIG_CACHESTAT_SYSCALL=y
# CONFIG_PC104 is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_SELFTEST is not set
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_GUEST_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# end of Kernel Performance Events And Counters

CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y

#
# Kexec and crash features
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_HAVE_IMA_KEXEC=y
CONFIG_KEXEC=y
CONFIG_KEXEC_FILE=y
CONFIG_KEXEC_SIG=y
# CONFIG_KEXEC_SIG_FORCE is not set
CONFIG_CRASH_DUMP=y
CONFIG_CRASH_HOTPLUG=y
CONFIG_CRASH_MAX_MEMORY_RANGES=8192
# end of Kexec and crash features
# end of General setup

CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_CSUM=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_AUDIT_ARCH=y
CONFIG_KASAN_SHADOW_OFFSET=0xdffffc0000000000
CONFIG_X86_64_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y

#
# Processor type and features
#
CONFIG_SMP=y
CONFIG_X86_MPPARSE=y
# CONFIG_GOLDFISH is not set
# CONFIG_X86_CPU_RESCTRL is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_VSMP is not set
# CONFIG_X86_GOLDFISH is not set
# CONFIG_X86_INTEL_MID is not set
# CONFIG_X86_INTEL_LPSS is not set
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
CONFIG_IOSF_MBI=y
# CONFIG_IOSF_MBI_DEBUG is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_HYPERVISOR_GUEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_MATOM is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
CONFIG_X86_HAVE_PAE=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_IA32_FEAT_CTL=y
CONFIG_X86_VMX_FEATURE_NAMES=y
CONFIG_PROCESSOR_SELECT=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_HYGON=y
# CONFIG_CPU_SUP_CENTAUR is not set
CONFIG_CPU_SUP_ZHAOXIN=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_GART_IOMMU is not set
CONFIG_BOOT_VESA_SUPPORT=y
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS_RANGE_BEGIN=2
CONFIG_NR_CPUS_RANGE_END=512
CONFIG_NR_CPUS_DEFAULT=64
CONFIG_NR_CPUS=64
CONFIG_SCHED_CLUSTER=y
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_SCHED_MC_PRIO=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCELOG_LEGACY is not set
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set

#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_PERF_EVENTS_INTEL_RAPL=y
CONFIG_PERF_EVENTS_INTEL_CSTATE=y
# CONFIG_PERF_EVENTS_AMD_POWER is not set
CONFIG_PERF_EVENTS_AMD_UNCORE=y
# CONFIG_PERF_EVENTS_AMD_BRS is not set
# end of Performance monitoring

CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
CONFIG_X86_IOPL_IOPERM=y
CONFIG_MICROCODE=y
# CONFIG_MICROCODE_LATE_LOADING is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_X86_5LEVEL is not set
CONFIG_X86_DIRECT_GBPAGES=y
# CONFIG_X86_CPA_STATISTICS is not set
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NUMA_EMU=y
CONFIG_NODES_SHIFT=6
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
# CONFIG_X86_PMEM_LEGACY is not set
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_X86_UMIP=y
CONFIG_CC_HAS_IBT=y
CONFIG_X86_CET=y
CONFIG_X86_KERNEL_IBT=y
CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
CONFIG_X86_INTEL_TSX_MODE_OFF=y
# CONFIG_X86_INTEL_TSX_MODE_ON is not set
# CONFIG_X86_INTEL_TSX_MODE_AUTO is not set
# CONFIG_X86_USER_SHADOW_STACK is not set
# CONFIG_EFI is not set
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
CONFIG_ARCH_SUPPORTS_KEXEC=y
CONFIG_ARCH_SUPPORTS_KEXEC_FILE=y
CONFIG_ARCH_SELECTS_KEXEC_FILE=y
CONFIG_ARCH_SUPPORTS_KEXEC_PURGATORY=y
CONFIG_ARCH_SUPPORTS_KEXEC_SIG=y
CONFIG_ARCH_SUPPORTS_KEXEC_SIG_FORCE=y
CONFIG_ARCH_SUPPORTS_KEXEC_BZIMAGE_VERIFY_SIG=y
CONFIG_ARCH_SUPPORTS_KEXEC_JUMP=y
CONFIG_ARCH_SUPPORTS_CRASH_DUMP=y
CONFIG_ARCH_SUPPORTS_CRASH_HOTPLUG=y
CONFIG_ARCH_HAS_GENERIC_CRASHKERNEL_RESERVATION=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
# CONFIG_RANDOMIZE_BASE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
# CONFIG_ADDRESS_MASKING is not set
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
CONFIG_LEGACY_VSYSCALL_XONLY=y
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
# CONFIG_STRICT_SIGALTSTACK_SIZE is not set
CONFIG_HAVE_LIVEPATCH=y
CONFIG_LIVEPATCH=y
# end of Processor type and features

CONFIG_CC_HAS_SLS=y
CONFIG_CC_HAS_RETURN_THUNK=y
CONFIG_CC_HAS_ENTRY_PADDING=y
CONFIG_FUNCTION_PADDING_CFI=11
CONFIG_FUNCTION_PADDING_BYTES=16
CONFIG_CALL_PADDING=y
CONFIG_HAVE_CALL_THUNKS=y
CONFIG_CALL_THUNKS=y
CONFIG_PREFIX_SYMBOLS=y
CONFIG_SPECULATION_MITIGATIONS=y
CONFIG_PAGE_TABLE_ISOLATION=y
CONFIG_RETPOLINE=y
CONFIG_RETHUNK=y
CONFIG_CPU_UNRET_ENTRY=y
CONFIG_CALL_DEPTH_TRACKING=y
# CONFIG_CALL_THUNKS_DEBUG is not set
CONFIG_CPU_IBPB_ENTRY=y
CONFIG_CPU_IBRS_ENTRY=y
CONFIG_CPU_SRSO=y
# CONFIG_SLS is not set
# CONFIG_GDS_FORCE_MITIGATION is not set
CONFIG_ARCH_HAS_ADD_PAGES=y

#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
# CONFIG_ENERGY_MODEL is not set
CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
CONFIG_ACPI_THERMAL_LIB=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SPCR_TABLE=y
# CONFIG_ACPI_FPDT is not set
CONFIG_ACPI_LPIT=y
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
# CONFIG_ACPI_EC_DEBUGFS is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_CPPC_LIB=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
# CONFIG_ACPI_NFIT is not set
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_HMAT is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
# CONFIG_ACPI_APEI is not set
# CONFIG_ACPI_DPTF is not set
# CONFIG_ACPI_CONFIGFS is not set
# CONFIG_ACPI_PFRUT is not set
CONFIG_ACPI_PCC=y
# CONFIG_ACPI_FFH is not set
# CONFIG_PMIC_OPREGION is not set
CONFIG_X86_PM_TIMER=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y

#
# CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
# CONFIG_X86_PCC_CPUFREQ is not set
# CONFIG_X86_AMD_PSTATE is not set
# CONFIG_X86_AMD_PSTATE_UT is not set
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set

#
# shared options
#
# end of CPU Frequency scaling

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_CPU_IDLE_GOV_TEO is not set
# end of CPU Idle

CONFIG_INTEL_IDLE=y
# end of Power management and ACPI options

#
# Bus options (PCI etc.)
#
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_MMCONF_FAM10H=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
# CONFIG_ISA_BUS is not set
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
# end of Bus options (PCI etc.)

#
# Binary Emulations
#
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_EMULATION_DEFAULT_DISABLED is not set
# CONFIG_X86_X32_ABI is not set
CONFIG_COMPAT_32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
# end of Binary Emulations

CONFIG_HAVE_KVM=y
CONFIG_KVM_COMMON=y
CONFIG_HAVE_KVM_PFNCACHE=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_DIRTY_RING=y
CONFIG_HAVE_KVM_DIRTY_RING_TSO=y
CONFIG_HAVE_KVM_DIRTY_RING_ACQ_REL=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_KVM_COMPAT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_HAVE_KVM_NO_POLL=y
CONFIG_KVM_XFER_TO_GUEST_WORK=y
CONFIG_HAVE_KVM_PM_NOTIFIER=y
CONFIG_KVM_GENERIC_HARDWARE_ENABLING=y
CONFIG_KVM_GENERIC_MMU_NOTIFIER=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
# CONFIG_KVM_SW_PROTECTED_VM is not set
# CONFIG_KVM_INTEL is not set
# CONFIG_KVM_AMD is not set
CONFIG_KVM_SMM=y
CONFIG_KVM_HYPERV=y
# CONFIG_KVM_XEN is not set
# CONFIG_KVM_PROVE_MMU is not set
CONFIG_KVM_MAX_NR_VCPUS=1024
CONFIG_AS_AVX512=y
CONFIG_AS_SHA1_NI=y
CONFIG_AS_SHA256_NI=y
CONFIG_AS_TPAUSE=y
CONFIG_AS_GFNI=y
CONFIG_AS_WRUSS=y

#
# General architecture-dependent options
#
CONFIG_HOTPLUG_SMT=y
CONFIG_HOTPLUG_CORE_SYNC=y
CONFIG_HOTPLUG_CORE_SYNC_DEAD=y
CONFIG_HOTPLUG_CORE_SYNC_FULL=y
CONFIG_HOTPLUG_SPLIT_STARTUP=y
CONFIG_HOTPLUG_PARALLEL=y
CONFIG_GENERIC_ENTRY=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
# CONFIG_STATIC_CALL_SELFTEST is not set
CONFIG_OPTPROBES=y
CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_KRETPROBE_ON_RETHOOK=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_ARCH_HAS_CPU_FINALIZE_INIT=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_ARCH_WANTS_NO_INSTR=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_RUST=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_MERGE_VMAS=y
CONFIG_MMU_LAZY_TLB_REFCOUNT=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_ARCH_HAS_NMI_SAFE_THIS_CPU_OPS=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
# CONFIG_SECCOMP_CACHE_DEBUG is not set
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG_THIN=y
CONFIG_LTO_NONE=y
CONFIG_ARCH_SUPPORTS_CFI_CLANG=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING_USER=y
CONFIG_HAVE_CONTEXT_TRACKING_USER_OFFSTACK=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PUD=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_HUGE_VMALLOC=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_PMD_MKWRITE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_HAVE_OBJTOOL=y
CONFIG_HAVE_JUMP_LABEL_HACK=y
CONFIG_HAVE_NOINSTR_HACK=y
CONFIG_HAVE_NOINSTR_VALIDATION=y
CONFIG_HAVE_UACCESS_VALIDATION=y
CONFIG_HAVE_STACK_VALIDATION=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET=y
# CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT is not set
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
CONFIG_HAVE_STATIC_CALL=y
CONFIG_HAVE_STATIC_CALL_INLINE=y
CONFIG_HAVE_PREEMPT_DYNAMIC=y
CONFIG_HAVE_PREEMPT_DYNAMIC_CALL=y
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SUPPORTS_PAGE_TABLE_CHECK=y
CONFIG_ARCH_HAS_ELFCORE_COMPAT=y
CONFIG_ARCH_HAS_PARANOID_L1D_FLUSH=y
CONFIG_DYNAMIC_SIGFRAME=y
CONFIG_ARCH_HAS_HW_PTE_YOUNG=y
CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling

CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_FUNCTION_ALIGNMENT_4B=y
CONFIG_FUNCTION_ALIGNMENT_16B=y
CONFIG_FUNCTION_ALIGNMENT=16
# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULE_SIG_FORMAT=y
CONFIG_MODULES=y
# CONFIG_MODULE_DEBUG is not set
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODULE_UNLOAD_TAINT_TRACKING is not set
CONFIG_MODVERSIONS=y
CONFIG_ASM_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_MODULE_SIG=y
# CONFIG_MODULE_SIG_FORCE is not set
CONFIG_MODULE_SIG_ALL=y
CONFIG_MODULE_SIG_SHA256=y
# CONFIG_MODULE_SIG_SHA384 is not set
# CONFIG_MODULE_SIG_SHA512 is not set
# CONFIG_MODULE_SIG_SHA3_256 is not set
# CONFIG_MODULE_SIG_SHA3_384 is not set
# CONFIG_MODULE_SIG_SHA3_512 is not set
CONFIG_MODULE_SIG_HASH="sha256"
CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
CONFIG_MODPROBE_PATH="/sbin/modprobe"
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLOCK_LEGACY_AUTOLOAD=y
CONFIG_BLK_DEV_BSG_COMMON=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_INTEGRITY_T10=y
CONFIG_BLK_DEV_WRITE_MOUNTED=y
# CONFIG_BLK_DEV_ZONED is not set
CONFIG_BLK_WBT=y
CONFIG_BLK_WBT_MQ=y
CONFIG_BLK_DEBUG_FS=y
# CONFIG_BLK_SED_OPAL is not set
# CONFIG_BLK_INLINE_ENCRYPTION is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
# CONFIG_ACORN_PARTITION_EESOX is not set
CONFIG_ACORN_PARTITION_ICS=y
# CONFIG_ACORN_PARTITION_ADFS is not set
# CONFIG_ACORN_PARTITION_POWERTEC is not set
CONFIG_ACORN_PARTITION_RISCIX=y
# CONFIG_AIX_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
# CONFIG_CMDLINE_PARTITION is not set
# end of Partition Types

CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_PM=y
CONFIG_BLOCK_HOLDER_DEPRECATED=y
CONFIG_BLK_MQ_STACKING=y

#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
# CONFIG_IOSCHED_BFQ is not set
# end of IO Schedulers

CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_ELF_KUNIT_TEST is not set
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
# end of Executable file formats

#
# Memory Management options
#
CONFIG_SWAP=y
# CONFIG_ZSWAP is not set

#
# Slab allocator options
#
CONFIG_SLUB=y
# CONFIG_SLUB_TINY is not set
CONFIG_SLAB_MERGE_DEFAULT=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
CONFIG_SLAB_FREELIST_HARDENED=y
CONFIG_SLUB_STATS=y
CONFIG_SLUB_CPU_PARTIAL=y
# CONFIG_RANDOM_KMALLOC_CACHES is not set
# end of Slab allocator options

# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_ARCH_WANT_OPTIMIZE_DAX_VMEMMAP=y
CONFIG_ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_COMPACTION=y
CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
# CONFIG_PAGE_REPORTING is not set
CONFIG_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_ARCH_ENABLE_THP_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_PCP_BATCH_SCALE_MAX=5
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
# CONFIG_HWPOISON_INJECT is not set
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_WANTS_THP_SWAP=y
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
# CONFIG_TRANSPARENT_HUGEPAGE_NEVER is not set
CONFIG_THP_SWAP=y
# CONFIG_READ_ONLY_THP_FOR_FS is not set
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
# CONFIG_CMA is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
CONFIG_ARCH_HAS_PTE_DEVMAP=y
CONFIG_ARCH_HAS_ZONE_DMA_SET=y
CONFIG_ZONE_DMA=y
CONFIG_ZONE_DMA32=y
CONFIG_VMAP_PFN=y
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_HAS_PKEYS=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_TEST is not set
# CONFIG_DMAPOOL_TEST is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_MEMFD_CREATE=y
CONFIG_SECRETMEM=y
# CONFIG_ANON_VMA_NAME is not set
CONFIG_HAVE_ARCH_USERFAULTFD_WP=y
CONFIG_HAVE_ARCH_USERFAULTFD_MINOR=y
CONFIG_USERFAULTFD=y
CONFIG_PTE_MARKER_UFFD_WP=y
# CONFIG_LRU_GEN is not set
CONFIG_ARCH_SUPPORTS_PER_VMA_LOCK=y
CONFIG_PER_VMA_LOCK=y
CONFIG_LOCK_MM_AND_FIND_VMA=y

#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring
# end of Memory Management options

CONFIG_NET=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
CONFIG_NET_XGRESS=y
CONFIG_SKB_EXTENSIONS=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_AF_UNIX_OOB=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_TLS is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_USER_COMPAT is not set
CONFIG_XFRM_INTERFACE=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_AH=m
CONFIG_XFRM_ESP=y
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_XDP_SOCKETS=y
# CONFIG_XDP_SOCKETS_DIAG is not set
CONFIG_NET_HANDSHAKE=y
# CONFIG_NET_HANDSHAKE_KUNIT_TEST is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_FIB_TRIE_STATS is not set
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE_DEMUX=y
CONFIG_NET_IP_TUNNEL=y
CONFIG_NET_IPGRE=y
# CONFIG_NET_IPGRE_BROADCAST is not set
CONFIG_IP_MROUTE_COMMON=y
CONFIG_IP_MROUTE=y
# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
# CONFIG_NET_IPVTI is not set
CONFIG_NET_UDP_TUNNEL=y
CONFIG_NET_FOU=y
CONFIG_NET_FOU_IP_TUNNELS=y
# CONFIG_INET_AH is not set
CONFIG_INET_ESP=y
# CONFIG_INET_ESP_OFFLOAD is not set
# CONFIG_INET_ESPINTCP is not set
# CONFIG_INET_IPCOMP is not set
CONFIG_INET_TABLE_PERTURB_ORDER=16
CONFIG_INET_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_INET_UDP_DIAG is not set
# CONFIG_INET_RAW_DIAG is not set
# CONFIG_INET_DIAG_DESTROY is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_NV is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_TCP_CONG_DCTCP is not set
# CONFIG_TCP_CONG_CDG is not set
# CONFIG_TCP_CONG_BBR is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_AO is not set
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
# CONFIG_INET6_ESP_OFFLOAD is not set
# CONFIG_INET6_ESPINTCP is not set
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
# CONFIG_IPV6_ILA is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=y
# CONFIG_IPV6_VTI is not set
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=y
CONFIG_IPV6_GRE=y
CONFIG_IPV6_FOU=y
CONFIG_IPV6_FOU_TUNNEL=y
CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not set
CONFIG_IPV6_MROUTE=y
# CONFIG_IPV6_MROUTE_MULTIPLE_TABLES is not set
# CONFIG_IPV6_PIMSM_V2 is not set
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
# CONFIG_IPV6_RPL_LWTUNNEL is not set
# CONFIG_IPV6_IOAM6_LWTUNNEL is not set
# CONFIG_NETLABEL is not set
CONFIG_MPTCP=y
CONFIG_INET_MPTCP_DIAG=y
CONFIG_MPTCP_IPV6=y
# CONFIG_MPTCP_KUNIT_TEST is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_EGRESS=y
CONFIG_NETFILTER_SKIP_EGRESS=y
CONFIG_NETFILTER_BPF_LINK=y
# CONFIG_NETFILTER_NETLINK_ACCT is not set
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NETFILTER_NETLINK_OSF is not set
CONFIG_NF_CONNTRACK=y
# CONFIG_NF_LOG_SYSLOG is not set
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_SECMARK is not set
# CONFIG_NF_CONNTRACK_ZONES is not set
# CONFIG_NF_CONNTRACK_PROCFS is not set
# CONFIG_NF_CONNTRACK_EVENTS is not set
# CONFIG_NF_CONNTRACK_TIMEOUT is not set
# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
# CONFIG_NF_CONNTRACK_LABELS is not set
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
# CONFIG_NF_CONNTRACK_AMANDA is not set
# CONFIG_NF_CONNTRACK_FTP is not set
# CONFIG_NF_CONNTRACK_H323 is not set
# CONFIG_NF_CONNTRACK_IRC is not set
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
# CONFIG_NF_CONNTRACK_SNMP is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
# CONFIG_NF_CONNTRACK_SANE is not set
# CONFIG_NF_CONNTRACK_SIP is not set
# CONFIG_NF_CONNTRACK_TFTP is not set
# CONFIG_NF_CT_NETLINK is not set
CONFIG_NF_NAT=y
# CONFIG_NF_TABLES is not set
CONFIG_NETFILTER_XTABLES=y
# CONFIG_NETFILTER_XTABLES_COMPAT is not set

#
# Xtables combined modules
#
# CONFIG_NETFILTER_XT_MARK is not set
CONFIG_NETFILTER_XT_CONNMARK=y

#
# Xtables targets
#
# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
# CONFIG_NETFILTER_XT_TARGET_HMARK is not set
# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
# CONFIG_NETFILTER_XT_TARGET_LOG is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_NAT is not set
# CONFIG_NETFILTER_XT_TARGET_NETMAP is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_REDIRECT is not set
# CONFIG_NETFILTER_XT_TARGET_MASQUERADE is not set
# CONFIG_NETFILTER_XT_TARGET_TEE is not set
# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set

#
# Xtables matches
#
# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_BPF is not set
# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
# CONFIG_NETFILTER_XT_MATCH_CPU is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ECN is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
# CONFIG_NETFILTER_XT_MATCH_HL is not set
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
# CONFIG_NETFILTER_XT_MATCH_OSF is not set
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=y
# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
CONFIG_NETFILTER_XT_MATCH_STATE=y
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# end of Core Netfilter Configuration

# CONFIG_IP_SET is not set
# CONFIG_IP_VS is not set

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
# CONFIG_NF_SOCKET_IPV4 is not set
# CONFIG_NF_TPROXY_IPV4 is not set
# CONFIG_NF_DUP_IPV4 is not set
# CONFIG_NF_LOG_ARP is not set
# CONFIG_NF_LOG_IPV4 is not set
# CONFIG_NF_REJECT_IPV4 is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# end of IP: Netfilter Configuration

#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_SOCKET_IPV6 is not set
# CONFIG_NF_TPROXY_IPV6 is not set
# CONFIG_NF_DUP_IPV6 is not set
# CONFIG_NF_REJECT_IPV6 is not set
# CONFIG_NF_LOG_IPV6 is not set
# CONFIG_IP6_NF_IPTABLES is not set
# end of IPv6: Netfilter Configuration

CONFIG_NF_DEFRAG_IPV6=y
# CONFIG_NF_CONNTRACK_BRIDGE is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_COOKIE_HMAC_SHA1 is not set
CONFIG_INET_SCTP_DIAG=y
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFB is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_CBS is not set
# CONFIG_NET_SCH_ETF is not set
# CONFIG_NET_SCH_TAPRIO is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_SKBPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
# CONFIG_NET_SCH_QFQ is not set
# CONFIG_NET_SCH_CODEL is not set
# CONFIG_NET_SCH_FQ_CODEL is not set
# CONFIG_NET_SCH_CAKE is not set
CONFIG_NET_SCH_FQ=y
# CONFIG_NET_SCH_HHF is not set
# CONFIG_NET_SCH_PIE is not set
CONFIG_NET_SCH_INGRESS=y
# CONFIG_NET_SCH_PLUG is not set
# CONFIG_NET_SCH_ETS is not set
# CONFIG_NET_SCH_DEFAULT is not set

#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_FLOW is not set
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_CLS_BPF=y
CONFIG_NET_CLS_FLOWER=y
# CONFIG_NET_CLS_MATCHALL is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
# CONFIG_NET_EMATCH_CMP is not set
# CONFIG_NET_EMATCH_NBYTE is not set
# CONFIG_NET_EMATCH_U32 is not set
# CONFIG_NET_EMATCH_META is not set
# CONFIG_NET_EMATCH_TEXT is not set
# CONFIG_NET_EMATCH_IPT is not set
CONFIG_NET_CLS_ACT=y
# CONFIG_NET_ACT_POLICE is not set
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_SAMPLE is not set
# CONFIG_NET_ACT_IPT is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not set
# CONFIG_NET_ACT_CSUM is not set
# CONFIG_NET_ACT_MPLS is not set
# CONFIG_NET_ACT_VLAN is not set
# CONFIG_NET_ACT_BPF is not set
# CONFIG_NET_ACT_CONNMARK is not set
# CONFIG_NET_ACT_CTINFO is not set
# CONFIG_NET_ACT_SKBMOD is not set
# CONFIG_NET_ACT_IFE is not set
# CONFIG_NET_ACT_TUNNEL_KEY is not set
# CONFIG_NET_ACT_GATE is not set
# CONFIG_NET_TC_SKB_EXT is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
CONFIG_VSOCKETS=y
CONFIG_VSOCKETS_DIAG=y
CONFIG_VSOCKETS_LOOPBACK=y
# CONFIG_VIRTIO_VSOCKETS is not set
CONFIG_VIRTIO_VSOCKETS_COMMON=y
# CONFIG_NETLINK_DIAG is not set
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=y
CONFIG_MPLS_ROUTING=y
CONFIG_MPLS_IPTUNNEL=y
# CONFIG_NET_NSH is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_QRTR is not set
# CONFIG_NET_NCSI is not set
CONFIG_PCPU_DEV_REFCNT=y
CONFIG_MAX_SKB_FRAGS=17
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_STREAM_PARSER=y
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_DROP_MONITOR is not set
# end of Network testing
# end of Networking options

# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
CONFIG_STREAM_PARSER=y
# CONFIG_MCTP is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set

#
# CFG80211 needs to be enabled for MAC80211
#
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_RFKILL is not set
CONFIG_NET_9P=y
CONFIG_NET_9P_FD=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
CONFIG_LWTUNNEL=y
CONFIG_LWTUNNEL_BPF=y
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_NET_SELFTESTS=y
CONFIG_NET_SOCK_MSG=y
CONFIG_NET_DEVLINK=y
CONFIG_PAGE_POOL=y
# CONFIG_PAGE_POOL_STATS is not set
CONFIG_FAILOVER=y
CONFIG_ETHTOOL_NETLINK=y
# CONFIG_NETDEV_ADDR_LIST_TEST is not set
# CONFIG_NET_TEST is not set

#
# Device Drivers
#
CONFIG_HAVE_EISA=y
# CONFIG_EISA is not set
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEASPM is not set
CONFIG_PCIE_PME=y
# CONFIG_PCIE_DPC is not set
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_PF_STUB is not set
CONFIG_PCI_ATS=y
CONFIG_PCI_LOCKLESS_CONFIG=y
CONFIG_PCI_IOV=y
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
CONFIG_PCI_LABEL=y
# CONFIG_PCIE_BUS_TUNE_OFF is not set
CONFIG_PCIE_BUS_DEFAULT=y
# CONFIG_PCIE_BUS_SAFE is not set
# CONFIG_PCIE_BUS_PERFORMANCE is not set
# CONFIG_PCIE_BUS_PEER2PEER is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_ACPI is not set
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
# CONFIG_HOTPLUG_PCI_SHPC is not set

#
# PCI controller drivers
#
# CONFIG_VMD is not set

#
# Cadence-based PCIe controllers
#
# end of Cadence-based PCIe controllers

#
# DesignWare-based PCIe controllers
#
# CONFIG_PCI_MESON is not set
# CONFIG_PCIE_DW_PLAT_HOST is not set
# end of DesignWare-based PCIe controllers

#
# Mobiveil-based PCIe controllers
#
# end of Mobiveil-based PCIe controllers
# end of PCI controller drivers

#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint

#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# end of PCI switch controller drivers

# CONFIG_CXL_BUS is not set
# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set

#
# Generic Driver Options
#
CONFIG_AUXILIARY_BUS=y
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_DEVTMPFS_SAFE is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_DEBUG=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
# CONFIG_FW_LOADER_COMPRESS is not set
# CONFIG_FW_UPLOAD is not set
# end of Firmware loader

CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_PM_QOS_KUNIT_TEST is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
# CONFIG_DM_KUNIT_TEST is not set
# CONFIG_DRIVER_PE_KUNIT_TEST is not set
CONFIG_GENERIC_CPU_DEVICES=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
# CONFIG_REGMAP_BUILD is not set
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# CONFIG_FW_DEVLINK_SYNC_STATE_TIMEOUT is not set
# end of Generic Driver Options

#
# Bus devices
#
# CONFIG_MHI_BUS is not set
# CONFIG_MHI_BUS_EP is not set
# end of Bus devices

#
# Cache Drivers
#
# end of Cache Drivers

CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y

#
# Firmware Drivers
#

#
# ARM System Control and Management Interface Protocol
#
# end of ARM System Control and Management Interface Protocol

CONFIG_EDD=y
CONFIG_EDD_OFF=y
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DMIID=y
# CONFIG_DMI_SYSFS is not set
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
# CONFIG_ISCSI_IBFT is not set
# CONFIG_FW_CFG_SYSFS is not set
CONFIG_SYSFB=y
# CONFIG_SYSFB_SIMPLEFB is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# Qualcomm firmware drivers
#
# end of Qualcomm firmware drivers

#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers

# CONFIG_GNSS is not set
# CONFIG_MTD is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=m
# CONFIG_BLK_DEV_FD is not set
CONFIG_CDROM=y
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=y
# CONFIG_ZRAM is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=16
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_UBLK is not set

#
# NVME Support
#
CONFIG_NVME_CORE=y
CONFIG_BLK_DEV_NVME=y
# CONFIG_NVME_MULTIPATH is not set
# CONFIG_NVME_VERBOSE_ERRORS is not set
# CONFIG_NVME_FC is not set
# CONFIG_NVME_TCP is not set
# CONFIG_NVME_HOST_AUTH is not set
# CONFIG_NVME_TARGET is not set
# end of NVME Support

#
# Misc devices
#
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_SRAM is not set
# CONFIG_DW_XDATA_PCIE is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_XILINX_SDFEC is not set
# CONFIG_NSM is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_EEPROM_EE1004 is not set
# end of EEPROM support

# CONFIG_CB710_CORE is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# end of Texas Instruments shared transport line discipline

# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_ALTERA_STAPL is not set
# CONFIG_INTEL_MEI is not set
# CONFIG_VMWARE_VMCI is not set
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_BCM_VK is not set
# CONFIG_MISC_ALCOR_PCI is not set
# CONFIG_MISC_RTSX_PCI is not set
# CONFIG_UACCE is not set
# CONFIG_PVPANIC is not set
# CONFIG_GP_PCI1XXXX is not set
# end of Misc devices

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI_COMMON=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SRP_ATTRS is not set
# end of SCSI Transports

CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT3SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_MPI3MR is not set
# CONFIG_SCSI_SMARTPQI is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_MYRB is not set
# CONFIG_SCSI_MYRS is not set
# CONFIG_VMWARE_PVSCSI is not set
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FDOMAIN_PCI is not set
# CONFIG_SCSI_ISCI is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=y
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_SCSI_PMCRAID=y
# CONFIG_SCSI_PM8001 is not set
CONFIG_SCSI_VIRTIO=y
CONFIG_SCSI_DH=y
# CONFIG_SCSI_DH_RDAC is not set
# CONFIG_SCSI_DH_HP_SW is not set
# CONFIG_SCSI_DH_EMC is not set
# CONFIG_SCSI_DH_ALUA is not set
# end of SCSI device support

CONFIG_ATA=y
CONFIG_SATA_HOST=y
CONFIG_PATA_TIMINGS=y
# CONFIG_ATA_VERBOSE_ERROR is not set
CONFIG_ATA_FORCE=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not set
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
CONFIG_SATA_MOBILE_LPM_POLICY=0
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_AHCI_DWC is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
CONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
CONFIG_PATA_MPIIX=y
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_BITMAP_FILE=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
CONFIG_MD_CLUSTER=y
CONFIG_BCACHE=y
# CONFIG_BCACHE_DEBUG is not set
# CONFIG_BCACHE_ASYNC_REGISTRATION is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=y
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=y
CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING=y
CONFIG_DM_DEBUG_BLOCK_STACK_TRACING=y
CONFIG_DM_BIO_PRISON=y
CONFIG_DM_PERSISTENT_DATA=y
CONFIG_DM_UNSTRIPED=y
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_THIN_PROVISIONING=y
CONFIG_DM_CACHE=y
CONFIG_DM_CACHE_SMQ=y
CONFIG_DM_WRITECACHE=y
CONFIG_DM_EBS=y
CONFIG_DM_ERA=y
CONFIG_DM_CLONE=y
CONFIG_DM_MIRROR=y
CONFIG_DM_LOG_USERSPACE=y
CONFIG_DM_RAID=y
CONFIG_DM_ZERO=y
CONFIG_DM_MULTIPATH=y
CONFIG_DM_MULTIPATH_QL=y
CONFIG_DM_MULTIPATH_ST=y
CONFIG_DM_MULTIPATH_HST=y
CONFIG_DM_MULTIPATH_IOA=y
CONFIG_DM_DELAY=y
CONFIG_DM_DUST=y
CONFIG_DM_INIT=y
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=y
CONFIG_DM_VERITY=y
CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG=y
CONFIG_DM_VERITY_FEC=y
CONFIG_DM_SWITCH=y
CONFIG_DM_LOG_WRITES=y
CONFIG_DM_INTEGRITY=y
CONFIG_DM_AUDIT=y
CONFIG_TARGET_CORE=y
# CONFIG_TCM_IBLOCK is not set
# CONFIG_TCM_FILEIO is not set
# CONFIG_TCM_PSCSI is not set
# CONFIG_TCM_USER2 is not set
CONFIG_LOOPBACK_TARGET=y
# CONFIG_ISCSI_TARGET is not set
# CONFIG_REMOTE_TARGET is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_SAS=y
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LOGGING is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# end of IEEE 1394 (FireWire) support

# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
CONFIG_DUMMY=y
# CONFIG_WIREGUARD is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_IPVLAN is not set
CONFIG_VXLAN=y
CONFIG_GENEVE=y
# CONFIG_BAREUDP is not set
# CONFIG_GTP is not set
# CONFIG_AMT is not set
# CONFIG_MACSEC is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
# CONFIG_NETCONSOLE_EXTENDED_LOG is not set
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=y
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
CONFIG_VIRTIO_NET=y
CONFIG_NLMON=y
# CONFIG_NETKIT is not set
# CONFIG_ARCNET is not set
CONFIG_ETHERNET=y
CONFIG_MDIO=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_AGERE is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
# CONFIG_ENA_ETHERNET is not set
# CONFIG_NET_VENDOR_AMD is not set
CONFIG_NET_VENDOR_AQUANTIA=y
# CONFIG_AQTION is not set
# CONFIG_NET_VENDOR_ARC is not set
CONFIG_NET_VENDOR_ASIX=y
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_CX_ECAT is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
CONFIG_NET_VENDOR_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_THUNDER_NIC_PF is not set
# CONFIG_THUNDER_NIC_VF is not set
# CONFIG_THUNDER_NIC_BGX is not set
# CONFIG_THUNDER_NIC_RGX is not set
# CONFIG_CAVIUM_PTP is not set
# CONFIG_LIQUIDIO is not set
# CONFIG_LIQUIDIO_VF is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CISCO is not set
CONFIG_NET_VENDOR_CORTINA=y
CONFIG_NET_VENDOR_DAVICOM=y
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
CONFIG_NET_VENDOR_ENGLEDER=y
# CONFIG_TSNEP is not set
CONFIG_NET_VENDOR_EZCHIP=y
CONFIG_NET_VENDOR_FUNGIBLE=y
# CONFIG_FUN_ETH is not set
CONFIG_NET_VENDOR_GOOGLE=y
# CONFIG_GVE is not set
CONFIG_NET_VENDOR_HUAWEI=y
# CONFIG_HINIC is not set
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_E1000E_HWTS=y
CONFIG_IGB=y
CONFIG_IGBVF=y
CONFIG_IXGBE=y
CONFIG_IXGBE_DCB=y
CONFIG_IXGBEVF=y
CONFIG_I40E=y
# CONFIG_I40E_DCB is not set
CONFIG_IAVF=y
CONFIG_I40EVF=y
# CONFIG_ICE is not set
CONFIG_FM10K=y
# CONFIG_IGC is not set
# CONFIG_IDPF is not set
# CONFIG_JME is not set
CONFIG_NET_VENDOR_LITEX=y
# CONFIG_NET_VENDOR_MARVELL is not set
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX4_EN=y
CONFIG_MLX4_EN_DCB=y
CONFIG_MLX4_CORE=y
CONFIG_MLX4_DEBUG=y
CONFIG_MLX4_CORE_GEN2=y
# CONFIG_MLX5_CORE is not set
# CONFIG_MLXSW_CORE is not set
# CONFIG_MLXFW is not set
# CONFIG_NET_VENDOR_MICREL is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_LAN743X is not set
# CONFIG_VCAP is not set
CONFIG_NET_VENDOR_MICROSEMI=y
CONFIG_NET_VENDOR_MICROSOFT=y
# CONFIG_NET_VENDOR_MYRI is not set
# CONFIG_FEALNX is not set
CONFIG_NET_VENDOR_NI=y
# CONFIG_NI_XGE_MANAGEMENT_ENET is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
CONFIG_NET_VENDOR_NETERION=y
# CONFIG_S2IO is not set
CONFIG_NET_VENDOR_NETRONOME=y
# CONFIG_NFP is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
# CONFIG_NET_VENDOR_OKI is not set
# CONFIG_ETHOC is not set
CONFIG_NET_VENDOR_PACKET_ENGINES=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_PENSANDO=y
# CONFIG_IONIC is not set
# CONFIG_NET_VENDOR_QLOGIC is not set
# CONFIG_NET_VENDOR_BROCADE is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCOM_EMAC is not set
# CONFIG_RMNET is not set
# CONFIG_NET_VENDOR_RDC is not set
# CONFIG_NET_VENDOR_REALTEK is not set
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_ROCKER=y
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
CONFIG_NET_VENDOR_SOLARFLARE=y
# CONFIG_SFC is not set
# CONFIG_SFC_FALCON is not set
# CONFIG_SFC_SIENA is not set
# CONFIG_NET_VENDOR_SMSC is not set
CONFIG_NET_VENDOR_SOCIONEXT=y
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
CONFIG_NET_VENDOR_VERTEXCOM=y
# CONFIG_NET_VENDOR_VIA is not set
CONFIG_NET_VENDOR_WANGXUN=y
# CONFIG_NGBE is not set
# CONFIG_TXGBE is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_NET_VENDOR_XILINX=y
# CONFIG_XILINX_EMACLITE is not set
# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
CONFIG_FIXED_PHY=y

#
# MII PHY device drivers
#
# CONFIG_AMD_PHY is not set
# CONFIG_ADIN_PHY is not set
# CONFIG_ADIN1100_PHY is not set
# CONFIG_AQUANTIA_PHY is not set
# CONFIG_AX88796B_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_BCM54140_PHY is not set
# CONFIG_BCM7XXX_PHY is not set
# CONFIG_BCM84881_PHY is not set
# CONFIG_BCM87XX_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_CORTINA_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_INTEL_XWAY_PHY is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_MARVELL_10G_PHY is not set
# CONFIG_MARVELL_88Q2XXX_PHY is not set
# CONFIG_MARVELL_88X2222_PHY is not set
# CONFIG_MAXLINEAR_GPHY is not set
# CONFIG_MEDIATEK_GE_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_MICROCHIP_T1S_PHY is not set
# CONFIG_MICROCHIP_PHY is not set
# CONFIG_MICROCHIP_T1_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
# CONFIG_MOTORCOMM_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_NXP_CBTX_PHY is not set
# CONFIG_NXP_C45_TJA11XX_PHY is not set
# CONFIG_NCN26000_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_RENESAS_PHY is not set
# CONFIG_ROCKCHIP_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_TERANETICS_PHY is not set
# CONFIG_DP83822_PHY is not set
# CONFIG_DP83TC811_PHY is not set
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
# CONFIG_DP83869_PHY is not set
# CONFIG_DP83TD510_PHY is not set
# CONFIG_DP83TG720_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_XILINX_GMII2RGMII is not set
# CONFIG_PSE_CONTROLLER is not set
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
CONFIG_FWNODE_MDIO=y
CONFIG_ACPI_MDIO=y
CONFIG_MDIO_DEVRES=y
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MDIO_BCM_UNIMAC is not set
# CONFIG_MDIO_THUNDER is not set

#
# MDIO Multiplexers
#

#
# PCS device drivers
#
# end of PCS device drivers

# CONFIG_PPP is not set
# CONFIG_SLIP is not set

#
# Host-side USB support is needed for USB Network Adapter support
#
# CONFIG_WLAN is not set
# CONFIG_WAN is not set

#
# Wireless WAN
#
# CONFIG_WWAN is not set
# end of Wireless WAN

# CONFIG_VMXNET3 is not set
# CONFIG_FUJITSU_ES is not set
CONFIG_NETDEVSIM=y
CONFIG_NET_FAILOVER=y
# CONFIG_ISDN is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set
CONFIG_INPUT_VIVALDIFMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
# CONFIG_INPUT_KUNIT_TEST is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1050 is not set
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CYPRESS_SF is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_GPIO_BEEPER is not set
# CONFIG_INPUT_GPIO_DECODER is not set
# CONFIG_INPUT_GPIO_VIBRA is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_KXTJ9 is not set
CONFIG_INPUT_UINPUT=y
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_DA7280_HAPTICS is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IQS269A is not set
# CONFIG_INPUT_IQS626A is not set
# CONFIG_INPUT_IQS7222 is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_INPUT_DRV260X_HAPTICS is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
# CONFIG_RMI4_CORE is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_SERIO_GPIO_PS2 is not set
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set
# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=0
CONFIG_LEGACY_TIOCSTI=y
CONFIG_LDISC_AUTOLOAD=y

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_16550A_VARIANTS is not set
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCILIB=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
CONFIG_SERIAL_8250_NR_UARTS=48
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250_PCI1XXXX is not set
CONFIG_SERIAL_8250_DWLIB=y
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_8250_LPSS=y
# CONFIG_SERIAL_8250_MID is not set
CONFIG_SERIAL_8250_PERICOM=y

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_LANTIQ is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_SPRD is not set
# end of Serial drivers

CONFIG_SERIAL_MCTRL_GPIO=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_N_GSM is not set
# CONFIG_NOZOMI is not set
# CONFIG_NULL_TTY is not set
CONFIG_HVC_DRIVER=y
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
CONFIG_DEVMEM=y
# CONFIG_NVRAM is not set
CONFIG_DEVPORT=y
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HPET_MMAP_DEFAULT=y
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=y
# CONFIG_TCG_TIS_I2C is not set
# CONFIG_TCG_TIS_I2C_CR50 is not set
# CONFIG_TCG_TIS_I2C_ATMEL is not set
# CONFIG_TCG_TIS_I2C_INFINEON is not set
# CONFIG_TCG_TIS_I2C_NUVOTON is not set
# CONFIG_TCG_NSC is not set
# CONFIG_TCG_ATMEL is not set
# CONFIG_TCG_INFINEON is not set
CONFIG_TCG_CRB=y
# CONFIG_TCG_VTPM_PROXY is not set
# CONFIG_TCG_TIS_ST33ZP24_I2C is not set
# CONFIG_TELCLOCK is not set
# CONFIG_XILLYBUS is not set
# end of Character devices

#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_MUX is not set
# CONFIG_I2C_HELPER_AUTO is not set
# CONFIG_I2C_SMBUS is not set

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
# end of I2C Algorithms

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_AMD_MP2 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_ISMT is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_NVIDIA_GPU is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PCI1XXXX is not set
# CONFIG_I2C_TAOS_EVM is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_MLXCPLD is not set
# CONFIG_I2C_VIRTIO is not set
# end of I2C Hardware Bus support

# CONFIG_I2C_STUB is not set
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support

# CONFIG_I3C is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
# CONFIG_PPS_CLIENT_LDISC is not set
# CONFIG_PPS_CLIENT_GPIO is not set

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
CONFIG_PTP_1588_CLOCK_OPTIONAL=y

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# CONFIG_PTP_1588_CLOCK_IDT82P33 is not set
# CONFIG_PTP_1588_CLOCK_IDTCM is not set
# CONFIG_PTP_1588_CLOCK_MOCK is not set
# end of PTP clock support

# CONFIG_PINCTRL is not set
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_GPIO_ACPI=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
CONFIG_GPIO_CDEV=y
CONFIG_GPIO_CDEV_V1=y

#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_AMDPT is not set
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_EXAR is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_MB86S7X is not set
# CONFIG_GPIO_AMD_FCH is not set
# end of Memory mapped GPIO drivers

#
# Port-mapped I/O GPIO drivers
#
# CONFIG_GPIO_VX855 is not set
# CONFIG_GPIO_F7188X is not set
# CONFIG_GPIO_IT87 is not set
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_SCH311X is not set
# CONFIG_GPIO_WINBOND is not set
# CONFIG_GPIO_WS16C48 is not set
# end of Port-mapped I/O GPIO drivers

#
# I2C GPIO expanders
#
# CONFIG_GPIO_FXL6408 is not set
# CONFIG_GPIO_DS4520 is not set
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCA9570 is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_TPIC2810 is not set
# end of I2C GPIO expanders

#
# MFD GPIO expanders
#
# CONFIG_GPIO_ELKHARTLAKE is not set
# end of MFD GPIO expanders

#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_PCI_IDIO_16 is not set
# CONFIG_GPIO_PCIE_IDIO_24 is not set
# CONFIG_GPIO_RDC321X is not set
# end of PCI GPIO expanders

#
# Virtual GPIO drivers
#
# CONFIG_GPIO_AGGREGATOR is not set
# CONFIG_GPIO_LATCH is not set
# CONFIG_GPIO_MOCKUP is not set
# CONFIG_GPIO_VIRTIO is not set
# CONFIG_GPIO_SIM is not set
# end of Virtual GPIO drivers

# CONFIG_W1 is not set
# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_IP5XXX_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_CHARGER_ADP5061 is not set
# CONFIG_BATTERY_CW2015 is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SAMSUNG_SDI is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_LT3651 is not set
# CONFIG_CHARGER_LTC4162L is not set
# CONFIG_CHARGER_MAX77976 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24257 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_BQ2515X is not set
# CONFIG_CHARGER_BQ25890 is not set
# CONFIG_CHARGER_BQ25980 is not set
# CONFIG_CHARGER_BQ256XX is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_BATTERY_GOLDFISH is not set
# CONFIG_BATTERY_RT5033 is not set
# CONFIG_CHARGER_RT9455 is not set
# CONFIG_CHARGER_BD99954 is not set
# CONFIG_BATTERY_UG3105 is not set
# CONFIG_FUEL_GAUGE_MM8013 is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_NETLINK is not set
# CONFIG_THERMAL_STATISTICS is not set
# CONFIG_THERMAL_DEBUGFS is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_EMULATION is not set

#
# Intel thermal drivers
#
# CONFIG_INTEL_POWERCLAMP is not set
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_INTEL_TCC=y
CONFIG_X86_PKG_TEMP_THERMAL=m
# CONFIG_INTEL_SOC_DTS_THERMAL is not set

#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
# end of ACPI INT340X thermal drivers

# CONFIG_INTEL_PCH_THERMAL is not set
# CONFIG_INTEL_TCC_COOLING is not set
# CONFIG_INTEL_HFI_THERMAL is not set
# end of Intel thermal drivers

# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=m
# CONFIG_MFD_AS3711 is not set
# CONFIG_MFD_SMPRO is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_CS42L43_I2C is not set
# CONFIG_MFD_MADERA is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_MP2629 is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
# CONFIG_LPC_ICH is not set
CONFIG_LPC_SCH=m
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
# CONFIG_MFD_INTEL_LPSS_PCI is not set
# CONFIG_MFD_INTEL_PMC_BXT is not set
# CONFIG_MFD_IQS62X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77541 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6360 is not set
# CONFIG_MFD_MT6370 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_SY7636A is not set
CONFIG_MFD_RDC321X=m
# CONFIG_MFD_RT4831 is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RT5120 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS6594_I2C is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TQMX86 is not set
CONFIG_MFD_VX855=m
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_ATC260X_I2C is not set
# end of Multifunction device drivers

# CONFIG_REGULATOR is not set
CONFIG_RC_CORE=y
CONFIG_BPF_LIRC_MODE2=y
CONFIG_LIRC=y
CONFIG_RC_MAP=y
# CONFIG_RC_DECODERS is not set
# CONFIG_RC_DEVICES is not set

#
# CEC support
#
# CONFIG_MEDIA_CEC_SUPPORT is not set
# end of CEC support

# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
CONFIG_APERTURE_HELPERS=y
CONFIG_VIDEO_CMDLINE=y
CONFIG_VIDEO_NOMODESET=y
# CONFIG_AUXDISPLAY is not set
CONFIG_AGP=y
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
CONFIG_AGP_SIS=m
CONFIG_AGP_VIA=y
CONFIG_INTEL_GTT=y
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=y
CONFIG_DRM_MIPI_DSI=y
# CONFIG_DRM_DEBUG_MM is not set
# CONFIG_DRM_KUNIT_TEST is not set
CONFIG_DRM_KMS_HELPER=y
# CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS is not set
CONFIG_DRM_DEBUG_MODESET_LOCK=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_DISPLAY_HELPER=m
CONFIG_DRM_DISPLAY_DP_HELPER=y
CONFIG_DRM_DISPLAY_HDCP_HELPER=y
CONFIG_DRM_DISPLAY_HDMI_HELPER=y
# CONFIG_DRM_DP_AUX_CHARDEV is not set
# CONFIG_DRM_DP_CEC is not set
CONFIG_DRM_TTM=m
# CONFIG_DRM_TTM_KUNIT_TEST is not set
CONFIG_DRM_BUDDY=m

#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_I2C_NXP_TDA9950 is not set
# end of I2C encoder or helper chips

#
# ARM devices
#
# end of ARM devices

# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_AMDGPU is not set
# CONFIG_DRM_NOUVEAU is not set
CONFIG_DRM_I915=m
CONFIG_DRM_I915_FORCE_PROBE=""
CONFIG_DRM_I915_CAPTURE_ERROR=y
CONFIG_DRM_I915_COMPRESS_ERROR=y
CONFIG_DRM_I915_USERPTR=y

#
# drm/i915 Debugging
#
# CONFIG_DRM_I915_WERROR is not set
# CONFIG_DRM_I915_DEBUG is not set
# CONFIG_DRM_I915_DEBUG_MMIO is not set
# CONFIG_DRM_I915_SW_FENCE_DEBUG_OBJECTS is not set
# CONFIG_DRM_I915_SW_FENCE_CHECK_DAG is not set
# CONFIG_DRM_I915_DEBUG_GUC is not set
# CONFIG_DRM_I915_SELFTEST is not set
# CONFIG_DRM_I915_LOW_LEVEL_TRACEPOINTS is not set
# CONFIG_DRM_I915_DEBUG_VBLANK_EVADE is not set
# CONFIG_DRM_I915_DEBUG_RUNTIME_PM is not set
# CONFIG_DRM_I915_DEBUG_WAKEREF is not set
# end of drm/i915 Debugging

#
# drm/i915 Profile Guided Optimisation
#
CONFIG_DRM_I915_REQUEST_TIMEOUT=20000
CONFIG_DRM_I915_FENCE_TIMEOUT=10000
CONFIG_DRM_I915_USERFAULT_AUTOSUSPEND=250
CONFIG_DRM_I915_HEARTBEAT_INTERVAL=2500
CONFIG_DRM_I915_PREEMPT_TIMEOUT=640
CONFIG_DRM_I915_PREEMPT_TIMEOUT_COMPUTE=7500
CONFIG_DRM_I915_MAX_REQUEST_BUSYWAIT=8000
CONFIG_DRM_I915_STOP_TIMEOUT=100
CONFIG_DRM_I915_TIMESLICE_DURATION=1
# end of drm/i915 Profile Guided Optimisation

# CONFIG_DRM_XE is not set
# CONFIG_DRM_VGEM is not set
# CONFIG_DRM_VKMS is not set
# CONFIG_DRM_VMWGFX is not set
# CONFIG_DRM_GMA500 is not set
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_QXL is not set
# CONFIG_DRM_VIRTIO_GPU is not set
CONFIG_DRM_PANEL=y

#
# Display Panels
#
# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set
# end of Display Panels

CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y

#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# end of Display Interface Bridges

# CONFIG_DRM_ETNAVIV is not set
# CONFIG_DRM_BOCHS is not set
# CONFIG_DRM_CIRRUS_QEMU is not set
# CONFIG_DRM_SIMPLEDRM is not set
# CONFIG_DRM_VBOXVIDEO is not set
# CONFIG_DRM_SSD130X is not set
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y

#
# Frame buffer Devices
#
CONFIG_FB=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=y
# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SSD1307 is not set
# CONFIG_FB_SM712 is not set
CONFIG_FB_CORE=y
CONFIG_FB_NOTIFY=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DEVICE=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYSMEM_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_IOMEM_FOPS=y
CONFIG_FB_IOMEM_HELPERS=y
CONFIG_FB_SYSMEM_HELPERS=y
CONFIG_FB_SYSMEM_HELPERS_DEFERRED=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
# end of Frame buffer Devices

#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=m
# CONFIG_BACKLIGHT_KTD253 is not set
# CONFIG_BACKLIGHT_KTZ8866 is not set
# CONFIG_BACKLIGHT_APPLE is not set
# CONFIG_BACKLIGHT_QCOM_WLED is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
# end of Backlight & LCD device support

CONFIG_VGASTATE=y
CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION is not set
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
# end of Console display driver support

# CONFIG_LOGO is not set
# end of Graphics support

# CONFIG_DRM_ACCEL is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
CONFIG_HIDRAW=y
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_COUGAR is not set
# CONFIG_HID_MACALLY is not set
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_EVISION is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
# CONFIG_HID_GLORIOUS is not set
# CONFIG_HID_GOOGLE_STADIA_FF is not set
# CONFIG_HID_VIVALDI is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_VIEWSONIC is not set
# CONFIG_HID_VRC2 is not set
# CONFIG_HID_XIAOMI is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_ITE is not set
# CONFIG_HID_JABRA is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LENOVO is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MALTRON is not set
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_REDRAGON is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTI is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PXRC is not set
# CONFIG_HID_RAZER is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SEMITEK is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEAM is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_TOPRE is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set
# end of Special HID drivers

#
# HID-BPF support
#
# CONFIG_HID_BPF is not set
# end of HID-BPF support

CONFIG_I2C_HID=y
# CONFIG_I2C_HID_ACPI is not set
# CONFIG_I2C_HID_OF is not set

#
# Intel ISH HID support
#
# CONFIG_INTEL_ISH_HID is not set
# end of Intel ISH HID support

#
# AMD SFH HID Support
#
# CONFIG_AMD_SFH_HID is not set
# end of AMD SFH HID Support

CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
# CONFIG_RTC_LIB_KUNIT_TEST is not set
CONFIG_RTC_NVMEM=y

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
CONFIG_RTC_DRV_TEST=m

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABEOZ9 is not set
# CONFIG_RTC_DRV_ABX80X is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_MAX31335 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF85363 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8010 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3028 is not set
# CONFIG_RTC_DRV_RV3032 is not set
# CONFIG_RTC_DRV_RV8803 is not set
# CONFIG_RTC_DRV_SD3078 is not set

#
# SPI RTC drivers
#
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set
# CONFIG_RTC_DRV_RX6110 is not set

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_RP5C01 is not set

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_FTRTC010 is not set

#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_GOLDFISH is not set
# CONFIG_DMADEVICES is not set

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
# CONFIG_UDMABUF is not set
# CONFIG_DMABUF_MOVE_NOTIFY is not set
# CONFIG_DMABUF_DEBUG is not set
# CONFIG_DMABUF_SELFTESTS is not set
# CONFIG_DMABUF_HEAPS is not set
# CONFIG_DMABUF_SYSFS_STATS is not set
# end of DMABUF options

CONFIG_UIO=y
# CONFIG_UIO_CIF is not set
# CONFIG_UIO_PDRV_GENIRQ is not set
# CONFIG_UIO_DMEM_GENIRQ is not set
# CONFIG_UIO_AEC is not set
# CONFIG_UIO_SERCOS3 is not set
# CONFIG_UIO_PCI_GENERIC is not set
# CONFIG_UIO_NETX is not set
# CONFIG_UIO_PRUSS is not set
# CONFIG_UIO_MF624 is not set
# CONFIG_VFIO is not set
CONFIG_IRQ_BYPASS_MANAGER=m
CONFIG_VIRT_DRIVERS=y
CONFIG_VMGENID=y
# CONFIG_VBOXGUEST is not set
# CONFIG_NITRO_ENCLAVES is not set
CONFIG_VIRTIO_ANCHOR=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_PCI_LIB=y
CONFIG_VIRTIO_PCI_LIB_LEGACY=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_ADMIN_LEGACY=y
CONFIG_VIRTIO_PCI_LEGACY=y
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_VIRTIO_INPUT is not set
# CONFIG_VIRTIO_MMIO is not set
# CONFIG_VDPA is not set
CONFIG_VHOST_MENU=y
# CONFIG_VHOST_NET is not set
# CONFIG_VHOST_SCSI is not set
# CONFIG_VHOST_VSOCK is not set
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set

#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support

# CONFIG_GREYBUS is not set
# CONFIG_COMEDI is not set
CONFIG_STAGING=y
# CONFIG_RTS5208 is not set
# CONFIG_FB_SM750 is not set
# CONFIG_STAGING_MEDIA is not set
# CONFIG_FIELDBUS_DEV is not set
# CONFIG_VME_BUS is not set
# CONFIG_CHROME_PLATFORMS is not set
# CONFIG_MELLANOX_PLATFORM is not set
CONFIG_SURFACE_PLATFORMS=y
# CONFIG_SURFACE_3_POWER_OPREGION is not set
# CONFIG_SURFACE_GPE is not set
# CONFIG_SURFACE_HOTPLUG is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACPI_WMI=m
CONFIG_WMI_BMOF=m
# CONFIG_MXM_WMI is not set
# CONFIG_NVIDIA_WMI_EC_BACKLIGHT is not set
# CONFIG_XIAOMI_WMI is not set
# CONFIG_YOGABOOK is not set
# CONFIG_ACERHDF is not set
# CONFIG_ACER_WIRELESS is not set
# CONFIG_AMD_HSMP is not set
# CONFIG_AMD_WBRF is not set
# CONFIG_ADV_SWBUTTON is not set
# CONFIG_APPLE_GMUX is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_ASUS_WIRELESS is not set
# CONFIG_ASUS_TF103C_DOCK is not set
# CONFIG_EEEPC_LAPTOP is not set
# CONFIG_X86_PLATFORM_DRIVERS_DELL is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_GPD_POCKET_FAN is not set
# CONFIG_X86_PLATFORM_DRIVERS_HP is not set
# CONFIG_WIRELESS_HOTKEY is not set
# CONFIG_IBM_RTL is not set
# CONFIG_LENOVO_YMC is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_THINKPAD_LMI is not set
# CONFIG_INTEL_ATOMISP2_PM is not set
# CONFIG_INTEL_IFS is not set
# CONFIG_INTEL_SAR_INT1092 is not set

#
# Intel Speed Select Technology interface support
#
# CONFIG_INTEL_SPEED_SELECT_INTERFACE is not set
# end of Intel Speed Select Technology interface support

# CONFIG_INTEL_WMI_SBL_FW_UPDATE is not set
# CONFIG_INTEL_WMI_THUNDERBOLT is not set

#
# Intel Uncore Frequency Control
#
# CONFIG_INTEL_UNCORE_FREQ_CONTROL is not set
# end of Intel Uncore Frequency Control

# CONFIG_INTEL_HID_EVENT is not set
# CONFIG_INTEL_VBTN is not set
# CONFIG_INTEL_PUNIT_IPC is not set
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
# CONFIG_INTEL_TURBO_MAX_3 is not set
# CONFIG_INTEL_VSEC is not set
# CONFIG_MSI_WMI is not set
# CONFIG_BARCO_P50_GPIO is not set
# CONFIG_SAMSUNG_LAPTOP is not set
# CONFIG_SAMSUNG_Q10 is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_TOSHIBA_WMI is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_MLX_PLATFORM is not set
# CONFIG_INSPUR_PLATFORM_PROFILE is not set
# CONFIG_INTEL_IPS is not set
# CONFIG_INTEL_SCU_PCI is not set
# CONFIG_INTEL_SCU_PLATFORM is not set
# CONFIG_SIEMENS_SIMATIC_IPC is not set
# CONFIG_WINMATE_FM07_KEYS is not set
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
# CONFIG_COMMON_CLK_MAX9485 is not set
# CONFIG_COMMON_CLK_SI5341 is not set
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI544 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_XILINX_VCU is not set
# CONFIG_CLK_KUNIT_TEST is not set
# CONFIG_CLK_GATE_KUNIT_TEST is not set
# CONFIG_CLK_FD_KUNIT_TEST is not set
# CONFIG_HWSPINLOCK is not set

#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# end of Clock Source drivers

CONFIG_MAILBOX=y
CONFIG_PCC=y
# CONFIG_ALTERA_MBOX is not set
CONFIG_IOMMU_IOVA=y
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
# end of Generic IOMMU Pagetable Support

# CONFIG_IOMMU_DEBUGFS is not set
# CONFIG_IOMMU_DEFAULT_DMA_STRICT is not set
CONFIG_IOMMU_DEFAULT_DMA_LAZY=y
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
CONFIG_IOMMU_DMA=y
# CONFIG_AMD_IOMMU is not set
# CONFIG_INTEL_IOMMU is not set
# CONFIG_IOMMUFD is not set
# CONFIG_IRQ_REMAP is not set
# CONFIG_VIRTIO_IOMMU is not set

#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers

#
# Rpmsg drivers
#
# CONFIG_RPMSG_QCOM_GLINK_RPM is not set
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers

# CONFIG_SOUNDWIRE is not set

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers

#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers

#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers

#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers

#
# i.MX SoC drivers
#
# end of i.MX SoC drivers

#
# Enable LiteX SoC Builder specific drivers
#
# end of Enable LiteX SoC Builder specific drivers

# CONFIG_WPCM450_SOC is not set

#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers

# CONFIG_SOC_TI is not set

#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers

#
# PM Domains
#

#
# Amlogic PM Domains
#
# end of Amlogic PM Domains

#
# Broadcom PM Domains
#
# end of Broadcom PM Domains

#
# i.MX PM Domains
#
# end of i.MX PM Domains

#
# Qualcomm PM Domains
#
# end of Qualcomm PM Domains
# end of PM Domains

# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_PWM is not set

#
# IRQ chip support
#
# end of IRQ chip support

# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set

#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_PHY_CAN_TRANSCEIVER is not set

#
# PHY drivers for Broadcom platforms
#
# CONFIG_BCM_KONA_USB2_PHY is not set
# end of PHY drivers for Broadcom platforms

# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_INTEL_LGM_EMMC is not set
# end of PHY Subsystem

# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set

#
# Performance monitor support
#
# CONFIG_DWC_PCIE_PMU is not set
# end of Performance monitor support

CONFIG_RAS=y
# CONFIG_RAS_CEC is not set
# CONFIG_USB4 is not set

#
# Android
#
# CONFIG_ANDROID_BINDER_IPC is not set
# end of Android

# CONFIG_LIBNVDIMM is not set
# CONFIG_DAX is not set
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
# CONFIG_NVMEM_LAYOUTS is not set
# CONFIG_NVMEM_RMEM is not set

#
# HW tracing support
#
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# end of HW tracing support

# CONFIG_FPGA is not set
# CONFIG_TEE is not set
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
# CONFIG_MOST is not set
# CONFIG_PECI is not set
# CONFIG_HTE is not set
# end of Device Drivers

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_IOMAP=y
CONFIG_BUFFER_HEAD=y
CONFIG_LEGACY_DIRECT_IO=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
# CONFIG_EXT4_KUNIT_TESTS is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
# CONFIG_BCACHEFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
CONFIG_FS_VERITY=y
# CONFIG_FS_VERITY_BUILTIN_SIGNATURES is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_QUOTA_DEBUG is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_FUSE_FS=y
# CONFIG_CUSE is not set
# CONFIG_VIRTIO_FS is not set
# CONFIG_OVERLAY_FS is not set

#
# Caches
#
CONFIG_NETFS_SUPPORT=y
# CONFIG_NETFS_STATS is not set
# CONFIG_FSCACHE is not set
# end of Caches

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
# end of CD-ROM/DVD Filesystems

#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_FAT_DEFAULT_UTF8 is not set
# CONFIG_FAT_KUNIT_TEST is not set
# CONFIG_EXFAT_FS is not set
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
# CONFIG_NTFS3_FS is not set
# end of DOS/FAT/EXFAT/NT Filesystems

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
# CONFIG_PROC_VMCORE_DEVICE_DUMP is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_PROC_PID_ARCH_STATUS=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
# CONFIG_TMPFS_INODE64 is not set
# CONFIG_TMPFS_QUOTA is not set
CONFIG_HUGETLBFS=y
# CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP_DEFAULT_ON is not set
CONFIG_HUGETLB_PAGE=y
CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
# end of Pseudo filesystems

CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EROFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_SWAP is not set
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=y
CONFIG_PNFS_BLOCK=y
CONFIG_PNFS_FLEXFILE_LAYOUT=y
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
# CONFIG_NFS_V4_1_MIGRATION is not set
CONFIG_NFS_V4_SECURITY_LABEL=y
# CONFIG_NFS_FSCACHE is not set
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFS_DISABLE_UDP_SUPPORT=y
# CONFIG_NFS_V4_2_READ_PLUS is not set
# CONFIG_NFSD is not set
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_NFS_V4_2_SSC_HELPER=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_KRB5_KUNIT_TEST is not set
# CONFIG_SUNRPC_DEBUG is not set
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_SMB_SERVER is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=y
# CONFIG_9P_FS_POSIX_ACL is not set
# CONFIG_9P_FS_SECURITY is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
# CONFIG_NLS_UTF8 is not set
CONFIG_DLM=y
# CONFIG_DLM_DEBUG is not set
# CONFIG_UNICODE is not set
CONFIG_IO_WQ=y
# end of File systems

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_REQUEST_CACHE is not set
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_TRUSTED_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set
# CONFIG_HARDENED_USERCOPY is not set
# CONFIG_FORTIFY_SOURCE is not set
# CONFIG_STATIC_USERMODEHELPER is not set
# CONFIG_SECURITY_SELINUX is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_LOADPIN is not set
# CONFIG_SECURITY_YAMA is not set
# CONFIG_SECURITY_SAFESETID is not set
# CONFIG_SECURITY_LOCKDOWN_LSM is not set
# CONFIG_SECURITY_LANDLOCK is not set
CONFIG_INTEGRITY=y
# CONFIG_INTEGRITY_SIGNATURE is not set
CONFIG_INTEGRITY_AUDIT=y
CONFIG_IMA=y
# CONFIG_IMA_KEXEC is not set
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_NG_TEMPLATE=y
# CONFIG_IMA_SIG_TEMPLATE is not set
CONFIG_IMA_DEFAULT_TEMPLATE="ima-ng"
CONFIG_IMA_DEFAULT_HASH_SHA1=y
# CONFIG_IMA_DEFAULT_HASH_SHA256 is not set
# CONFIG_IMA_DEFAULT_HASH_SHA512 is not set
CONFIG_IMA_DEFAULT_HASH="sha1"
CONFIG_IMA_WRITE_POLICY=y
CONFIG_IMA_READ_POLICY=y
# CONFIG_IMA_APPRAISE is not set
# CONFIG_IMA_ARCH_POLICY is not set
CONFIG_IMA_MEASURE_ASYMMETRIC_KEYS=y
CONFIG_IMA_QUEUE_EARLY_BOOT_KEYS=y
# CONFIG_IMA_DISABLE_HTABLE is not set
# CONFIG_EVM is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="yama,loadpin,safesetid,integrity,selinux,smack,tomoyo,apparmor,bpf"

#
# Kernel hardening options
#

#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
CONFIG_INIT_STACK_NONE=y
# CONFIG_INIT_STACK_ALL_PATTERN is not set
# CONFIG_INIT_STACK_ALL_ZERO is not set
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
# CONFIG_ZERO_CALL_USED_REGS is not set
# end of Memory initialization

#
# Hardening of kernel data structures
#
CONFIG_LIST_HARDENED=y
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# end of Hardening of kernel data structures

CONFIG_RANDSTRUCT_NONE=y
# end of Kernel hardening options
# end of Security options

CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_ASYNC_PQ=y
CONFIG_ASYNC_RAID6_RECOV=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SIG2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
# end of Crypto core or helper

#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
# CONFIG_CRYPTO_DH is not set
# CONFIG_CRYPTO_ECDH is not set
# CONFIG_CRYPTO_ECDSA is not set
# CONFIG_CRYPTO_ECRDSA is not set
# CONFIG_CRYPTO_SM2 is not set
# CONFIG_CRYPTO_CURVE25519 is not set
# end of Public-key cryptography

#
# Block ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARIA is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SM4_GENERIC is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# end of Block ciphers

#
# Length-preserving ciphers and modes
#
# CONFIG_CRYPTO_ADIANTUM is not set
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_CHACHA20=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_HCTR2 is not set
# CONFIG_CRYPTO_KEYWRAP is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
# end of Length-preserving ciphers and modes

#
# AEAD (authenticated encryption with associated data) ciphers
#
# CONFIG_CRYPTO_AEGIS128 is not set
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
# CONFIG_CRYPTO_CCM is not set
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_GENIV=y
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=y
CONFIG_CRYPTO_ESSIV=y
# end of AEAD (authenticated encryption with associated data) ciphers

#
# Hashes, digests, and MACs
#
CONFIG_CRYPTO_BLAKE2B=y
# CONFIG_CRYPTO_CMAC is not set
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_POLY1305=y
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=y
# CONFIG_CRYPTO_SM3_GENERIC is not set
# CONFIG_CRYPTO_STREEBOG is not set
# CONFIG_CRYPTO_VMAC is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_XXHASH=y
# end of Hashes, digests, and MACs

#
# CRCs (cyclic redundancy checks)
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32 is not set
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRC64_ROCKSOFT=y
# end of CRCs (cyclic redundancy checks)

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
# CONFIG_CRYPTO_ZSTD is not set
# end of Compression

#
# Random number generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_JITTERENTROPY_MEMORY_BLOCKS=64
CONFIG_CRYPTO_JITTERENTROPY_MEMORY_BLOCKSIZE=32
CONFIG_CRYPTO_JITTERENTROPY_OSR=1
# end of Random number generation

#
# Userspace interface
#
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE=y
# end of Userspace interface

CONFIG_CRYPTO_HASH_INFO=y

#
# Accelerated Cryptographic Algorithms for CPU (x86)
#
# CONFIG_CRYPTO_CURVE25519_X86 is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set
# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set
# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set
# CONFIG_CRYPTO_SM4_AESNI_AVX_X86_64 is not set
# CONFIG_CRYPTO_SM4_AESNI_AVX2_X86_64 is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set
# CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set
# CONFIG_CRYPTO_ARIA_AESNI_AVX_X86_64 is not set
# CONFIG_CRYPTO_ARIA_AESNI_AVX2_X86_64 is not set
# CONFIG_CRYPTO_ARIA_GFNI_AVX512_X86_64 is not set
# CONFIG_CRYPTO_CHACHA20_X86_64 is not set
# CONFIG_CRYPTO_AEGIS128_AESNI_SSE2 is not set
# CONFIG_CRYPTO_NHPOLY1305_SSE2 is not set
# CONFIG_CRYPTO_NHPOLY1305_AVX2 is not set
# CONFIG_CRYPTO_BLAKE2S_X86 is not set
# CONFIG_CRYPTO_POLYVAL_CLMUL_NI is not set
# CONFIG_CRYPTO_POLY1305_X86_64 is not set
# CONFIG_CRYPTO_SHA1_SSSE3 is not set
# CONFIG_CRYPTO_SHA256_SSSE3 is not set
# CONFIG_CRYPTO_SHA512_SSSE3 is not set
# CONFIG_CRYPTO_SM3_AVX_X86_64 is not set
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
CONFIG_CRYPTO_CRC32C_INTEL=y
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
# CONFIG_CRYPTO_CRCT10DIF_PCLMUL is not set
# end of Accelerated Cryptographic Algorithms for CPU (x86)

CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=y
# CONFIG_CRYPTO_DEV_PADLOCK_AES is not set
# CONFIG_CRYPTO_DEV_PADLOCK_SHA is not set
# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set
# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set
# CONFIG_CRYPTO_DEV_CCP is not set
# CONFIG_CRYPTO_DEV_NITROX_CNN55XX is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
# CONFIG_CRYPTO_DEV_QAT_C62X is not set
# CONFIG_CRYPTO_DEV_QAT_4XXX is not set
# CONFIG_CRYPTO_DEV_QAT_420XX is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
# CONFIG_CRYPTO_DEV_VIRTIO is not set
# CONFIG_CRYPTO_DEV_SAFEXCEL is not set
# CONFIG_CRYPTO_DEV_AMLOGIC_GXL is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_PKCS7_TEST_KEY is not set
# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set
# CONFIG_FIPS_SIGNATURE_SELFTEST is not set

#
# Certificates for signature checking
#
CONFIG_MODULE_SIG_KEY="certs/signing_key.pem"
CONFIG_MODULE_SIG_KEY_TYPE_RSA=y
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
# end of Certificates for signature checking

CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_RAID6_PQ_BENCHMARK=y
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
# CONFIG_CORDIC is not set
# CONFIG_PRIME_NUMBERS is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_ARCH_USE_SYM_ANNOTATIONS=y

#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_UTILS=y
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_GF128MUL=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
# CONFIG_CRYPTO_LIB_CHACHA is not set
# CONFIG_CRYPTO_LIB_CURVE25519 is not set
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=11
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
# CONFIG_CRYPTO_LIB_POLY1305 is not set
# CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines

CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC64_ROCKSOFT=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=y
# CONFIG_CRC4 is not set
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_ZSTD_COMMON=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
# CONFIG_XZ_DEC_POWERPC is not set
# CONFIG_XZ_DEC_ARM is not set
# CONFIG_XZ_DEC_ARMTHUMB is not set
# CONFIG_XZ_DEC_SPARC is not set
# CONFIG_XZ_DEC_MICROLZMA is not set
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_ZSTD=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_INTERVAL_TREE=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_CLOSURES=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_DMA_OPS=y
CONFIG_NEED_SG_DMA_FLAGS=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_SWIOTLB=y
# CONFIG_SWIOTLB_DYNAMIC is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_DMA_MAP_BENCHMARK is not set
CONFIG_SGL_ALLOC=y
# CONFIG_CPUMASK_OFFSTACK is not set
# CONFIG_FORCE_NR_CPUS is not set
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_DIMLIB=y
CONFIG_OID_REGISTRY=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_FONT_SUPPORT=y
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_6x10 is not set
CONFIG_FONT_10x18=y
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_TER16x32 is not set
# CONFIG_FONT_6x8 is not set
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_CPU_CACHE_INVALIDATE_MEMREGION=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_HAS_COPY_MC=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_STACKDEPOT_ALWAYS_INIT=y
CONFIG_STACKDEPOT_MAX_FRAMES=64
CONFIG_SBITMAP=y
# CONFIG_LWQ_TEST is not set
# end of Library routines

CONFIG_FIRMWARE_TABLE=y

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
# CONFIG_PRINTK_CALLER is not set
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DYNAMIC_DEBUG_CORE=y
CONFIG_SYMBOLIC_ERRNAME=y
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options

CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
CONFIG_AS_HAS_NON_CONST_ULEB128=y
# CONFIG_DEBUG_INFO_NONE is not set
# CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set
CONFIG_DEBUG_INFO_DWARF4=y
# CONFIG_DEBUG_INFO_DWARF5 is not set
# CONFIG_DEBUG_INFO_REDUCED is not set
CONFIG_DEBUG_INFO_COMPRESSED_NONE=y
# CONFIG_DEBUG_INFO_COMPRESSED_ZLIB is not set
# CONFIG_DEBUG_INFO_SPLIT is not set
CONFIG_DEBUG_INFO_BTF=y
CONFIG_PAHOLE_HAS_SPLIT_BTF=y
CONFIG_PAHOLE_HAS_LANG_EXCLUDE=y
CONFIG_DEBUG_INFO_BTF_MODULES=y
# CONFIG_MODULE_ALLOW_BTF_MISMATCH is not set
# CONFIG_GDB_SCRIPTS is not set
CONFIG_FRAME_WARN=3000
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_HEADERS_INSTALL is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
# CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B is not set
CONFIG_OBJTOOL=y
# CONFIG_VMLINUX_MAP is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options

#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
CONFIG_UBSAN=y
CONFIG_UBSAN_TRAP=y
CONFIG_CC_HAS_UBSAN_BOUNDS_STRICT=y
CONFIG_UBSAN_BOUNDS=y
CONFIG_UBSAN_BOUNDS_STRICT=y
CONFIG_UBSAN_SHIFT=y
# CONFIG_UBSAN_DIV_ZERO is not set
CONFIG_UBSAN_BOOL=y
CONFIG_UBSAN_ENUM=y
CONFIG_UBSAN_SANITIZE_ALL=y
# CONFIG_TEST_UBSAN is not set
CONFIG_HAVE_ARCH_KCSAN=y
CONFIG_HAVE_KCSAN_COMPILER=y
# end of Generic Kernel Debugging Instruments

#
# Networking Debugging
#
# CONFIG_NET_DEV_REFCNT_TRACKER is not set
# CONFIG_NET_NS_REFCNT_TRACKER is not set
# CONFIG_DEBUG_NET is not set
# end of Networking Debugging

#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_SLUB_DEBUG=y
CONFIG_SLUB_DEBUG_ON=y
CONFIG_PAGE_OWNER=y
# CONFIG_PAGE_TABLE_CHECK is not set
CONFIG_PAGE_POISONING=y
CONFIG_DEBUG_PAGE_REF=y
CONFIG_DEBUG_RODATA_TEST=y
CONFIG_ARCH_HAS_DEBUG_WX=y
# CONFIG_DEBUG_WX is not set
CONFIG_GENERIC_PTDUMP=y
CONFIG_PTDUMP_CORE=y
CONFIG_PTDUMP_DEBUGFS=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK_MEM_POOL_SIZE=16000
CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF=y
CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN=y
# CONFIG_PER_VMA_LOCK_STATS is not set
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
CONFIG_DEBUG_OBJECTS_FREE=y
CONFIG_DEBUG_OBJECTS_TIMERS=y
CONFIG_DEBUG_OBJECTS_WORK=y
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
# CONFIG_SHRINKER_DEBUG is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
CONFIG_DEBUG_VM_IRQSOFF=y
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_VM_MAPLE_TREE is not set
CONFIG_DEBUG_VM_RB=y
CONFIG_DEBUG_VM_PGFLAGS=y
CONFIG_DEBUG_VM_PGTABLE=y
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
CONFIG_DEBUG_VIRTUAL=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_PER_CPU_MAPS=y
CONFIG_ARCH_SUPPORTS_KMAP_LOCAL_FORCE_MAP=y
# CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP is not set
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
CONFIG_KASAN=y
CONFIG_KASAN_GENERIC=y
CONFIG_KASAN_OUTLINE=y
# CONFIG_KASAN_INLINE is not set
CONFIG_KASAN_STACK=y
# CONFIG_KASAN_VMALLOC is not set
# CONFIG_KASAN_KUNIT_TEST is not set
# CONFIG_KASAN_MODULE_TEST is not set
# CONFIG_KASAN_EXTRA_INFO is not set
CONFIG_HAVE_ARCH_KFENCE=y
# CONFIG_KFENCE is not set
CONFIG_HAVE_ARCH_KMSAN=y
# end of Memory Debugging

CONFIG_DEBUG_SHIRQ=y

#
# Debug Oops, Lockups and Hangs
#
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_BUDDY=y
CONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_HARDLOCKUP_DETECTOR_PREFER_BUDDY is not set
CONFIG_HARDLOCKUP_DETECTOR_PERF=y
# CONFIG_HARDLOCKUP_DETECTOR_BUDDY is not set
# CONFIG_HARDLOCKUP_DETECTOR_ARCH is not set
CONFIG_HARDLOCKUP_DETECTOR_COUNTS_HRTIMER=y
CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
CONFIG_WQ_WATCHDOG=y
# CONFIG_WQ_CPU_INTENSIVE_REPORT is not set
# CONFIG_TEST_LOCKUP is not set
# end of Debug Oops, Lockups and Hangs

#
# Scheduler Debugging
#
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# end of Scheduler Debugging

CONFIG_DEBUG_TIMEKEEPING=y
CONFIG_DEBUG_PREEMPT=y

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_PROVE_LOCKING=y
# CONFIG_PROVE_RAW_LOCK_NESTING is not set
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_DEBUG_RWSEMS=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_LOCKDEP=y
CONFIG_LOCKDEP_BITS=15
CONFIG_LOCKDEP_CHAINS_BITS=16
CONFIG_LOCKDEP_STACK_TRACE_BITS=19
CONFIG_LOCKDEP_STACK_TRACE_HASH_BITS=14
CONFIG_LOCKDEP_CIRCULAR_QUEUE_BITS=12
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
# CONFIG_SCF_TORTURE_TEST is not set
# CONFIG_CSD_LOCK_WAIT_DEBUG is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)

CONFIG_TRACE_IRQFLAGS=y
CONFIG_TRACE_IRQFLAGS_NMI=y
# CONFIG_NMI_CHECK_CPU is not set
# CONFIG_DEBUG_IRQFLAGS is not set
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_KOBJECT_RELEASE is not set

#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PLIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CLOSURES is not set
# CONFIG_DEBUG_MAPLE_TREE is not set
# end of Debug kernel data structures

#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
# CONFIG_RCU_SCALE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_REF_SCALE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_RCU_EXP_CPU_STALL_TIMEOUT=0
CONFIG_RCU_CPU_STALL_CPUTIME=y
CONFIG_RCU_TRACE=y
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging

CONFIG_DEBUG_WQ_FORCE_RR_CPU=y
CONFIG_CPU_HOTPLUG_STATE_CONTROL=y
CONFIG_LATENCYTOP=y
# CONFIG_DEBUG_CGROUP_REF is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_RETHOOK=y
CONFIG_RETHOOK=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_RETVAL=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_NO_PATCHABLE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_OBJTOOL_MCOUNT=y
CONFIG_HAVE_OBJTOOL_NOP_MCOUNT=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_BUILDTIME_MCOUNT_SORT=y
CONFIG_BUILDTIME_MCOUNT_SORT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_PREEMPTIRQ_TRACEPOINTS=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_BOOTTIME_TRACING is not set
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_FUNCTION_GRAPH_RETVAL is not set
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_DYNAMIC_FTRACE_WITH_ARGS=y
# CONFIG_FPROBE is not set
CONFIG_FUNCTION_PROFILER=y
CONFIG_STACK_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
CONFIG_SCHED_TRACER=y
# CONFIG_HWLAT_TRACER is not set
# CONFIG_OSNOISE_TRACER is not set
# CONFIG_TIMERLAT_TRACER is not set
CONFIG_MMIOTRACE=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_PROBE_EVENTS_BTF_ARGS=y
CONFIG_KPROBE_EVENTS=y
CONFIG_KPROBE_EVENTS_ON_NOTRACE=y
CONFIG_UPROBE_EVENTS=y
CONFIG_BPF_EVENTS=y
CONFIG_DYNAMIC_EVENTS=y
CONFIG_PROBE_EVENTS=y
CONFIG_BPF_KPROBE_OVERRIDE=y
CONFIG_FTRACE_MCOUNT_RECORD=y
CONFIG_FTRACE_MCOUNT_USE_CC=y
# CONFIG_SYNTH_EVENTS is not set
# CONFIG_USER_EVENTS is not set
# CONFIG_HIST_TRIGGERS is not set
# CONFIG_TRACE_EVENT_INJECT is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_TRACE_EVAL_MAP_FILE is not set
# CONFIG_FTRACE_RECORD_RECURSION is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_FTRACE_SORT_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_VALIDATE_TIME_DELTAS is not set
# CONFIG_MMIOTRACE_TEST is not set
# CONFIG_PREEMPTIRQ_DELAY_TEST is not set
# CONFIG_KPROBE_EVENT_GEN_TEST is not set
# CONFIG_RV is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
CONFIG_SAMPLES=y
# CONFIG_SAMPLE_AUXDISPLAY is not set
# CONFIG_SAMPLE_TRACE_EVENTS is not set
# CONFIG_SAMPLE_TRACE_CUSTOM_EVENTS is not set
# CONFIG_SAMPLE_TRACE_PRINTK is not set
CONFIG_SAMPLE_FTRACE_DIRECT=m
CONFIG_SAMPLE_FTRACE_DIRECT_MULTI=m
# CONFIG_SAMPLE_FTRACE_OPS is not set
# CONFIG_SAMPLE_TRACE_ARRAY is not set
# CONFIG_SAMPLE_KOBJECT is not set
# CONFIG_SAMPLE_KPROBES is not set
# CONFIG_SAMPLE_HW_BREAKPOINT is not set
# CONFIG_SAMPLE_KFIFO is not set
CONFIG_SAMPLE_LIVEPATCH=m
CONFIG_SAMPLE_CONFIGFS=m
# CONFIG_SAMPLE_VFIO_MDEV_MDPY_FB is not set
# CONFIG_SAMPLE_WATCHDOG is not set
# CONFIG_SAMPLE_KMEMLEAK is not set
CONFIG_HAVE_SAMPLE_FTRACE_DIRECT=y
CONFIG_HAVE_SAMPLE_FTRACE_DIRECT_MULTI=y
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
CONFIG_IO_STRICT_DEVMEM=y

#
# x86 Debugging
#
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_EARLY_PRINTK_USB_XDBC is not set
# CONFIG_DEBUG_TLBFLUSH is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
# CONFIG_IO_DELAY_0X80 is not set
CONFIG_IO_DELAY_0XED=y
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_DEBUG_ENTRY is not set
CONFIG_DEBUG_NMI_SELFTEST=y
CONFIG_X86_DEBUG_FPU=y
# CONFIG_PUNIT_ATOM_DEBUG is not set
CONFIG_UNWINDER_ORC=y
# CONFIG_UNWINDER_FRAME_POINTER is not set
# end of x86 Debugging

#
# Kernel Testing and Coverage
#
CONFIG_KUNIT=y
# CONFIG_KUNIT_DEBUGFS is not set
# CONFIG_KUNIT_TEST is not set
# CONFIG_KUNIT_EXAMPLE_TEST is not set
# CONFIG_KUNIT_ALL_TESTS is not set
CONFIG_KUNIT_DEFAULT_ENABLED=y
CONFIG_NOTIFIER_ERROR_INJECTION=y
# CONFIG_PM_NOTIFIER_ERROR_INJECT is not set
# CONFIG_NETDEV_NOTIFIER_ERROR_INJECT is not set
CONFIG_FUNCTION_ERROR_INJECTION=y
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
CONFIG_FAIL_PAGE_ALLOC=y
# CONFIG_FAULT_INJECTION_USERCOPY is not set
CONFIG_FAIL_MAKE_REQUEST=y
CONFIG_FAIL_IO_TIMEOUT=y
CONFIG_FAIL_FUTEX=y
CONFIG_FAULT_INJECTION_DEBUG_FS=y
CONFIG_FAIL_FUNCTION=y
# CONFIG_FAULT_INJECTION_CONFIGFS is not set
# CONFIG_FAULT_INJECTION_STACKTRACE_FILTER is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
CONFIG_RUNTIME_TESTING_MENU=y
# CONFIG_TEST_DHRY is not set
# CONFIG_LKDTM is not set
# CONFIG_CPUMASK_KUNIT_TEST is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_TEST_MIN_HEAP is not set
# CONFIG_TEST_SORT is not set
# CONFIG_TEST_DIV64 is not set
# CONFIG_TEST_IOV_ITER is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_TEST_REF_TRACKER is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_REED_SOLOMON_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_ASYNC_RAID6_TEST is not set
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_STRING_SELFTEST is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_SCANF is not set
# CONFIG_TEST_BITMAP is not set
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_XARRAY is not set
# CONFIG_TEST_MAPLE_TREE is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_IDA is not set
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_BITOPS is not set
CONFIG_TEST_VMALLOC=m
# CONFIG_TEST_USER_COPY is not set
CONFIG_TEST_BPF=m
# CONFIG_TEST_BLACKHOLE_DEV is not set
# CONFIG_FIND_BIT_BENCHMARK is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_SYSCTL is not set
# CONFIG_BITFIELD_KUNIT is not set
# CONFIG_CHECKSUM_KUNIT is not set
# CONFIG_HASH_KUNIT_TEST is not set
# CONFIG_RESOURCE_KUNIT_TEST is not set
# CONFIG_SYSCTL_KUNIT_TEST is not set
# CONFIG_LIST_KUNIT_TEST is not set
# CONFIG_HASHTABLE_KUNIT_TEST is not set
# CONFIG_LINEAR_RANGES_TEST is not set
# CONFIG_CMDLINE_KUNIT_TEST is not set
# CONFIG_BITS_TEST is not set
# CONFIG_SLUB_KUNIT_TEST is not set
# CONFIG_RATIONAL_KUNIT_TEST is not set
# CONFIG_MEMCPY_KUNIT_TEST is not set
# CONFIG_IS_SIGNED_TYPE_KUNIT_TEST is not set
# CONFIG_OVERFLOW_KUNIT_TEST is not set
# CONFIG_STACKINIT_KUNIT_TEST is not set
# CONFIG_HW_BREAKPOINT_KUNIT_TEST is not set
# CONFIG_STRCAT_KUNIT_TEST is not set
# CONFIG_STRSCPY_KUNIT_TEST is not set
# CONFIG_SIPHASH_KUNIT_TEST is not set
# CONFIG_TEST_UDELAY is not set
# CONFIG_TEST_STATIC_KEYS is not set
# CONFIG_TEST_DYNAMIC_DEBUG is not set
# CONFIG_TEST_KMOD is not set
# CONFIG_TEST_DEBUG_VIRTUAL is not set
# CONFIG_TEST_MEMCAT_P is not set
CONFIG_TEST_LIVEPATCH=m
# CONFIG_TEST_MEMINIT is not set
# CONFIG_TEST_FREE_PAGES is not set
# CONFIG_TEST_FPU is not set
# CONFIG_TEST_CLOCKSOURCE_WATCHDOG is not set
# CONFIG_TEST_OBJPOOL is not set
CONFIG_ARCH_USE_MEMTEST=y
# CONFIG_MEMTEST is not set
# end of Kernel Testing and Coverage

#
# Rust hacking
#
# end of Rust hacking
# end of Kernel hacking

[-- Attachment #3: runner.out --]
[-- Type: application/octet-stream, Size: 836004 bytes --]

Re: [PATCH v2 00/11] dm-raid: fix v6.7 regressions

[Yu Kuai]

Hi,

在 2024/01/25 9:51, Song Liu 写道:
> Hmm.. maybe it is caused by different .config? Attached is the
> output from the test and the config file I used.

Looks like your test differs from mine here:

| [ 0:16.663] aux wait_for_sync $vg $lv
| [ 0:17.002] #lvconvert-raid-reshape-linear_to_raid6-single-type.sh:67+ 
aux wait_for_sync LVMTEST2056vg LV
| [ 0:17.002] LVMTEST2056vg/LV (raid5_ls) in-sync, but 'a' characters in 
health status
| [ 0:17.200] LVMTEST2056vg/LV (raid5_ls) in-sync, but 'a' characters in 
health status

Mine:
[ 0:08.875] #lvconvert-raid-reshape-linear_to_raid6-single-type.sh:67+ 
aux wait_for_sync LVMTEST2826329vg LV
[ 0:08.876] LVMTEST2826329vg/LV (raid5_ls) is in-sync     0 98304 raid 
raid5_ls 4 AAAA 32768/32768 idle 0 0 -
[ 0:08.940] fsck -fn "$DM_DEV_DIR/$vg/$lv"
[ 0:08.943] #lvconvert-raid-reshape-linear_to_raid6-single-type.sh:68+ 
fsck -fn /mnt/test/LVMTEST2826329.RgRdke29n8/dev/LVMTEST2826329vg/LV

However, the we all enabled dm and raid related config, I have no clue
yet. :(

Thanks,
Kuai

Re: [PATCH v2 05/11] md: export helpers to stop sync_thread

[Xiao Ni]

On Wed, Jan 24, 2024 at 5:19 PM Yu Kuai <yukuai3@huawei.com> wrote:
>
> The new heleprs will be used in dm-raid in later patches to fix
> regressions and prevent calling md_reap_sync_thread() directly.
>
> Signed-off-by: Yu Kuai <yukuai3@huawei.com>
> ---
>  drivers/md/md.c | 41 +++++++++++++++++++++++++++++++++++++----
>  drivers/md/md.h |  3 +++
>  2 files changed, 40 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/md/md.c b/drivers/md/md.c
> index 6c5d0a372927..90cf31b53804 100644
> --- a/drivers/md/md.c
> +++ b/drivers/md/md.c
> @@ -4915,30 +4915,63 @@ static void stop_sync_thread(struct mddev *mddev, bool locked, bool check_seq)
>                 mddev_lock_nointr(mddev);
>  }
>
> -static void idle_sync_thread(struct mddev *mddev)
> +void md_idle_sync_thread(struct mddev *mddev)
>  {
> +       lockdep_assert_held(mddev->reconfig_mutex);
> +

Hi Kuai

There is a building error. It should give a pointer to
lockdep_assert_held. And same with the other two places in this patch.

Regards
Xiao

>         mutex_lock(&mddev->sync_mutex);
>         clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
> +       stop_sync_thread(mddev, true, true);
> +       mutex_unlock(&mddev->sync_mutex);
> +}
> +EXPORT_SYMBOL_GPL(md_idle_sync_thread);
> +
> +void md_frozen_sync_thread(struct mddev *mddev)
> +{
> +       lockdep_assert_held(mddev->reconfig_mutex);
> +
> +       mutex_lock(&mddev->sync_mutex);
> +       set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
> +       stop_sync_thread(mddev, true, false);
> +       mutex_unlock(&mddev->sync_mutex);
> +}
> +EXPORT_SYMBOL_GPL(md_frozen_sync_thread);
>
> +void md_unfrozen_sync_thread(struct mddev *mddev)
> +{
> +       lockdep_assert_held(mddev->reconfig_mutex);
> +
> +       mutex_lock(&mddev->sync_mutex);
> +       clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
> +       set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
> +       md_wakeup_thread(mddev->thread);
> +       sysfs_notify_dirent_safe(mddev->sysfs_action);
> +       mutex_unlock(&mddev->sync_mutex);
> +}
> +EXPORT_SYMBOL_GPL(md_unfrozen_sync_thread);
> +
> +static void idle_sync_thread(struct mddev *mddev)
> +{
>         if (mddev_lock(mddev)) {
>                 mutex_unlock(&mddev->sync_mutex);
>                 return;
>         }
>
> +       mutex_lock(&mddev->sync_mutex);
> +       clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
>         stop_sync_thread(mddev, false, true);
>         mutex_unlock(&mddev->sync_mutex);
>  }
>
>  static void frozen_sync_thread(struct mddev *mddev)
>  {
> -       mutex_lock(&mddev->sync_mutex);
> -       set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
> -
>         if (mddev_lock(mddev)) {
>                 mutex_unlock(&mddev->sync_mutex);
>                 return;
>         }
>
> +       mutex_lock(&mddev->sync_mutex);
> +       set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
>         stop_sync_thread(mddev, false, false);
>         mutex_unlock(&mddev->sync_mutex);
>  }
> diff --git a/drivers/md/md.h b/drivers/md/md.h
> index 8d881cc59799..437ab70ce79b 100644
> --- a/drivers/md/md.h
> +++ b/drivers/md/md.h
> @@ -781,6 +781,9 @@ extern void md_rdev_clear(struct md_rdev *rdev);
>  extern void md_handle_request(struct mddev *mddev, struct bio *bio);
>  extern int mddev_suspend(struct mddev *mddev, bool interruptible);
>  extern void mddev_resume(struct mddev *mddev);
> +extern void md_idle_sync_thread(struct mddev *mddev);
> +extern void md_frozen_sync_thread(struct mddev *mddev);
> +extern void md_unfrozen_sync_thread(struct mddev *mddev);
>
>  extern void md_reload_sb(struct mddev *mddev, int raid_disk);
>  extern void md_update_sb(struct mddev *mddev, int force);
> --
> 2.39.2
>

Re: [PATCH v2 05/11] md: export helpers to stop sync_thread

[Yu Kuai]

Hi,

在 2024/01/25 15:51, Xiao Ni 写道:
> On Wed, Jan 24, 2024 at 5:19 PM Yu Kuai <yukuai3@huawei.com> wrote:
>>
>> The new heleprs will be used in dm-raid in later patches to fix
>> regressions and prevent calling md_reap_sync_thread() directly.
>>
>> Signed-off-by: Yu Kuai <yukuai3@huawei.com>
>> ---
>>   drivers/md/md.c | 41 +++++++++++++++++++++++++++++++++++++----
>>   drivers/md/md.h |  3 +++
>>   2 files changed, 40 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/md/md.c b/drivers/md/md.c
>> index 6c5d0a372927..90cf31b53804 100644
>> --- a/drivers/md/md.c
>> +++ b/drivers/md/md.c
>> @@ -4915,30 +4915,63 @@ static void stop_sync_thread(struct mddev *mddev, bool locked, bool check_seq)
>>                  mddev_lock_nointr(mddev);
>>   }
>>
>> -static void idle_sync_thread(struct mddev *mddev)
>> +void md_idle_sync_thread(struct mddev *mddev)
>>   {
>> +       lockdep_assert_held(mddev->reconfig_mutex);
>> +
> 
> Hi Kuai
> 
> There is a building error. It should give a pointer to
> lockdep_assert_held. And same with the other two places in this patch.

Yes, I forgot that I disabled all the debug config in order to let tests
finish quickly.

Thanks for the notince, will fix this in v3.

Thanks,
Kuai

> 
> Regards
> Xiao
> 
>>          mutex_lock(&mddev->sync_mutex);
>>          clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
>> +       stop_sync_thread(mddev, true, true);
>> +       mutex_unlock(&mddev->sync_mutex);
>> +}
>> +EXPORT_SYMBOL_GPL(md_idle_sync_thread);
>> +
>> +void md_frozen_sync_thread(struct mddev *mddev)
>> +{
>> +       lockdep_assert_held(mddev->reconfig_mutex);
>> +
>> +       mutex_lock(&mddev->sync_mutex);
>> +       set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
>> +       stop_sync_thread(mddev, true, false);
>> +       mutex_unlock(&mddev->sync_mutex);
>> +}
>> +EXPORT_SYMBOL_GPL(md_frozen_sync_thread);
>>
>> +void md_unfrozen_sync_thread(struct mddev *mddev)
>> +{
>> +       lockdep_assert_held(mddev->reconfig_mutex);
>> +
>> +       mutex_lock(&mddev->sync_mutex);
>> +       clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
>> +       set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
>> +       md_wakeup_thread(mddev->thread);
>> +       sysfs_notify_dirent_safe(mddev->sysfs_action);
>> +       mutex_unlock(&mddev->sync_mutex);
>> +}
>> +EXPORT_SYMBOL_GPL(md_unfrozen_sync_thread);
>> +
>> +static void idle_sync_thread(struct mddev *mddev)
>> +{
>>          if (mddev_lock(mddev)) {
>>                  mutex_unlock(&mddev->sync_mutex);
>>                  return;
>>          }
>>
>> +       mutex_lock(&mddev->sync_mutex);
>> +       clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
>>          stop_sync_thread(mddev, false, true);
>>          mutex_unlock(&mddev->sync_mutex);
>>   }
>>
>>   static void frozen_sync_thread(struct mddev *mddev)
>>   {
>> -       mutex_lock(&mddev->sync_mutex);
>> -       set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
>> -
>>          if (mddev_lock(mddev)) {
>>                  mutex_unlock(&mddev->sync_mutex);
>>                  return;
>>          }
>>
>> +       mutex_lock(&mddev->sync_mutex);
>> +       set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
>>          stop_sync_thread(mddev, false, false);
>>          mutex_unlock(&mddev->sync_mutex);
>>   }
>> diff --git a/drivers/md/md.h b/drivers/md/md.h
>> index 8d881cc59799..437ab70ce79b 100644
>> --- a/drivers/md/md.h
>> +++ b/drivers/md/md.h
>> @@ -781,6 +781,9 @@ extern void md_rdev_clear(struct md_rdev *rdev);
>>   extern void md_handle_request(struct mddev *mddev, struct bio *bio);
>>   extern int mddev_suspend(struct mddev *mddev, bool interruptible);
>>   extern void mddev_resume(struct mddev *mddev);
>> +extern void md_idle_sync_thread(struct mddev *mddev);
>> +extern void md_frozen_sync_thread(struct mddev *mddev);
>> +extern void md_unfrozen_sync_thread(struct mddev *mddev);
>>
>>   extern void md_reload_sb(struct mddev *mddev, int raid_disk);
>>   extern void md_update_sb(struct mddev *mddev, int force);
>> --
>> 2.39.2
>>
> 
> .
> 

Re: [PATCH v2 05/11] md: export helpers to stop sync_thread

[Xiao Ni]

Hi all

This is the result of lvm2 tests:
make check
### 426 tests: 319 passed, 74 skipped, 0 timed out, 5 warned, 28
failed   in 56:04.914
make[1]: *** [Makefile:138: check] Error 1
make[1]: Leaving directory '/root/lvm2/test'
make: *** [Makefile:89: check] Error 2

Do you know where to check which cases fail?

Best Regards
Xiao

On Wed, Jan 24, 2024 at 5:19 PM Yu Kuai <yukuai3@huawei.com> wrote:
>
> The new heleprs will be used in dm-raid in later patches to fix
> regressions and prevent calling md_reap_sync_thread() directly.
>
> Signed-off-by: Yu Kuai <yukuai3@huawei.com>
> ---
>  drivers/md/md.c | 41 +++++++++++++++++++++++++++++++++++++----
>  drivers/md/md.h |  3 +++
>  2 files changed, 40 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/md/md.c b/drivers/md/md.c
> index 6c5d0a372927..90cf31b53804 100644
> --- a/drivers/md/md.c
> +++ b/drivers/md/md.c
> @@ -4915,30 +4915,63 @@ static void stop_sync_thread(struct mddev *mddev, bool locked, bool check_seq)
>                 mddev_lock_nointr(mddev);
>  }
>
> -static void idle_sync_thread(struct mddev *mddev)
> +void md_idle_sync_thread(struct mddev *mddev)
>  {
> +       lockdep_assert_held(mddev->reconfig_mutex);
> +
>         mutex_lock(&mddev->sync_mutex);
>         clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
> +       stop_sync_thread(mddev, true, true);
> +       mutex_unlock(&mddev->sync_mutex);
> +}
> +EXPORT_SYMBOL_GPL(md_idle_sync_thread);
> +
> +void md_frozen_sync_thread(struct mddev *mddev)
> +{
> +       lockdep_assert_held(mddev->reconfig_mutex);
> +
> +       mutex_lock(&mddev->sync_mutex);
> +       set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
> +       stop_sync_thread(mddev, true, false);
> +       mutex_unlock(&mddev->sync_mutex);
> +}
> +EXPORT_SYMBOL_GPL(md_frozen_sync_thread);
>
> +void md_unfrozen_sync_thread(struct mddev *mddev)
> +{
> +       lockdep_assert_held(mddev->reconfig_mutex);
> +
> +       mutex_lock(&mddev->sync_mutex);
> +       clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
> +       set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
> +       md_wakeup_thread(mddev->thread);
> +       sysfs_notify_dirent_safe(mddev->sysfs_action);
> +       mutex_unlock(&mddev->sync_mutex);
> +}
> +EXPORT_SYMBOL_GPL(md_unfrozen_sync_thread);
> +
> +static void idle_sync_thread(struct mddev *mddev)
> +{
>         if (mddev_lock(mddev)) {
>                 mutex_unlock(&mddev->sync_mutex);
>                 return;
>         }
>
> +       mutex_lock(&mddev->sync_mutex);
> +       clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
>         stop_sync_thread(mddev, false, true);
>         mutex_unlock(&mddev->sync_mutex);
>  }
>
>  static void frozen_sync_thread(struct mddev *mddev)
>  {
> -       mutex_lock(&mddev->sync_mutex);
> -       set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
> -
>         if (mddev_lock(mddev)) {
>                 mutex_unlock(&mddev->sync_mutex);
>                 return;
>         }
>
> +       mutex_lock(&mddev->sync_mutex);
> +       set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
>         stop_sync_thread(mddev, false, false);
>         mutex_unlock(&mddev->sync_mutex);
>  }
> diff --git a/drivers/md/md.h b/drivers/md/md.h
> index 8d881cc59799..437ab70ce79b 100644
> --- a/drivers/md/md.h
> +++ b/drivers/md/md.h
> @@ -781,6 +781,9 @@ extern void md_rdev_clear(struct md_rdev *rdev);
>  extern void md_handle_request(struct mddev *mddev, struct bio *bio);
>  extern int mddev_suspend(struct mddev *mddev, bool interruptible);
>  extern void mddev_resume(struct mddev *mddev);
> +extern void md_idle_sync_thread(struct mddev *mddev);
> +extern void md_frozen_sync_thread(struct mddev *mddev);
> +extern void md_unfrozen_sync_thread(struct mddev *mddev);
>
>  extern void md_reload_sb(struct mddev *mddev, int raid_disk);
>  extern void md_update_sb(struct mddev *mddev, int force);
> --
> 2.39.2
>

Re: [PATCH v2 05/11] md: export helpers to stop sync_thread

[Yu Kuai]

Hi,

在 2024/01/25 19:35, Xiao Ni 写道:
> Hi all
> 
> This is the result of lvm2 tests:
> make check
> ### 426 tests: 319 passed, 74 skipped, 0 timed out, 5 warned, 28
> failed   in 56:04.914

Are you testing with this patchset? 28 failed is much more than my
test result in following:

> make[1]: *** [Makefile:138: check] Error 1
> make[1]: Leaving directory '/root/lvm2/test'
> make: *** [Makefile:89: check] Error 2
> 
> Do you know where to check which cases fail?

I saved logs and grep keyword "failed:", and the result will look like
this:


You can find each test log in the dir test/result/
> 
> Best Regards
> Xiao
> 
> On Wed, Jan 24, 2024 at 5:19 PM Yu Kuai <yukuai3@huawei.com> wrote:
>>
>> The new heleprs will be used in dm-raid in later patches to fix
>> regressions and prevent calling md_reap_sync_thread() directly.
>>
>> Signed-off-by: Yu Kuai <yukuai3@huawei.com>
>> ---
>>   drivers/md/md.c | 41 +++++++++++++++++++++++++++++++++++++----
>>   drivers/md/md.h |  3 +++
>>   2 files changed, 40 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/md/md.c b/drivers/md/md.c
>> index 6c5d0a372927..90cf31b53804 100644
>> --- a/drivers/md/md.c
>> +++ b/drivers/md/md.c
>> @@ -4915,30 +4915,63 @@ static void stop_sync_thread(struct mddev *mddev, bool locked, bool check_seq)
>>                  mddev_lock_nointr(mddev);
>>   }
>>
>> -static void idle_sync_thread(struct mddev *mddev)
>> +void md_idle_sync_thread(struct mddev *mddev)
>>   {
>> +       lockdep_assert_held(mddev->reconfig_mutex);
>> +
>>          mutex_lock(&mddev->sync_mutex);
>>          clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
>> +       stop_sync_thread(mddev, true, true);
>> +       mutex_unlock(&mddev->sync_mutex);
>> +}
>> +EXPORT_SYMBOL_GPL(md_idle_sync_thread);
>> +
>> +void md_frozen_sync_thread(struct mddev *mddev)
>> +{
>> +       lockdep_assert_held(mddev->reconfig_mutex);
>> +
>> +       mutex_lock(&mddev->sync_mutex);
>> +       set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
>> +       stop_sync_thread(mddev, true, false);
>> +       mutex_unlock(&mddev->sync_mutex);
>> +}
>> +EXPORT_SYMBOL_GPL(md_frozen_sync_thread);
>>
>> +void md_unfrozen_sync_thread(struct mddev *mddev)
>> +{
>> +       lockdep_assert_held(mddev->reconfig_mutex);
>> +
>> +       mutex_lock(&mddev->sync_mutex);
>> +       clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
>> +       set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
>> +       md_wakeup_thread(mddev->thread);
>> +       sysfs_notify_dirent_safe(mddev->sysfs_action);
>> +       mutex_unlock(&mddev->sync_mutex);
>> +}
>> +EXPORT_SYMBOL_GPL(md_unfrozen_sync_thread);
>> +
>> +static void idle_sync_thread(struct mddev *mddev)
>> +{
>>          if (mddev_lock(mddev)) {
>>                  mutex_unlock(&mddev->sync_mutex);
>>                  return;
>>          }
>>
>> +       mutex_lock(&mddev->sync_mutex);
>> +       clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
>>          stop_sync_thread(mddev, false, true);
>>          mutex_unlock(&mddev->sync_mutex);
>>   }
>>
>>   static void frozen_sync_thread(struct mddev *mddev)
>>   {
>> -       mutex_lock(&mddev->sync_mutex);
>> -       set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
>> -
>>          if (mddev_lock(mddev)) {
>>                  mutex_unlock(&mddev->sync_mutex);
>>                  return;
>>          }
>>
>> +       mutex_lock(&mddev->sync_mutex);
>> +       set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
>>          stop_sync_thread(mddev, false, false);
>>          mutex_unlock(&mddev->sync_mutex);
>>   }
>> diff --git a/drivers/md/md.h b/drivers/md/md.h
>> index 8d881cc59799..437ab70ce79b 100644
>> --- a/drivers/md/md.h
>> +++ b/drivers/md/md.h
>> @@ -781,6 +781,9 @@ extern void md_rdev_clear(struct md_rdev *rdev);
>>   extern void md_handle_request(struct mddev *mddev, struct bio *bio);
>>   extern int mddev_suspend(struct mddev *mddev, bool interruptible);
>>   extern void mddev_resume(struct mddev *mddev);
>> +extern void md_idle_sync_thread(struct mddev *mddev);
>> +extern void md_frozen_sync_thread(struct mddev *mddev);
>> +extern void md_unfrozen_sync_thread(struct mddev *mddev);
>>
>>   extern void md_reload_sb(struct mddev *mddev, int raid_disk);
>>   extern void md_update_sb(struct mddev *mddev, int force);
>> --
>> 2.39.2
>>
> 
> .
> 

Re: [PATCH v2 05/11] md: export helpers to stop sync_thread

[Yu Kuai]

Hi,

在 2024/01/25 19:35, Xiao Ni 写道:
> Hi all
> 
> This is the result of lvm2 tests:
> make check
> ### 426 tests: 319 passed, 74 skipped, 0 timed out, 5 warned, 28
> failed   in 56:04.914

Are you testing with this patchset? 28 failed is much more than my
test result in following:

### 426 tests: 346 passed, 70 skipped, 0 timed out, 4 warned, 6 failed 
in 118:31.437
> make[1]: *** [Makefile:138: check] Error 1
> make[1]: Leaving directory '/root/lvm2/test'
> make: *** [Makefile:89: check] Error 2
> 
> Do you know where to check which cases fail?

I saved logs and grep keyword "failed:", and the result will look like
this:

###       failed: [ndev-vanilla] shell/duplicate-vgid.sh
###       failed: [ndev-vanilla] shell/fsadm-crypt.sh
###       failed: [ndev-vanilla] shell/lvchange-raid1-writemostly.sh
###       failed: [ndev-vanilla] shell/lvconvert-repair-raid.sh
###       failed: [ndev-vanilla] shell/lvextend-raid.sh
###       failed: [ndev-vanilla] shell/select-report.sh

BTW, you can find each test log in the dir（by default) test/result/.

Thanks,
Kuai

> 
> Best Regards
> Xiao
> 
> On Wed, Jan 24, 2024 at 5:19 PM Yu Kuai <yukuai3@huawei.com> wrote:
>>
>> The new heleprs will be used in dm-raid in later patches to fix
>> regressions and prevent calling md_reap_sync_thread() directly.
>>
>> Signed-off-by: Yu Kuai <yukuai3@huawei.com>
>> ---
>>   drivers/md/md.c | 41 +++++++++++++++++++++++++++++++++++++----
>>   drivers/md/md.h |  3 +++
>>   2 files changed, 40 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/md/md.c b/drivers/md/md.c
>> index 6c5d0a372927..90cf31b53804 100644
>> --- a/drivers/md/md.c
>> +++ b/drivers/md/md.c
>> @@ -4915,30 +4915,63 @@ static void stop_sync_thread(struct mddev *mddev, bool locked, bool check_seq)
>>                  mddev_lock_nointr(mddev);
>>   }
>>
>> -static void idle_sync_thread(struct mddev *mddev)
>> +void md_idle_sync_thread(struct mddev *mddev)
>>   {
>> +       lockdep_assert_held(mddev->reconfig_mutex);
>> +
>>          mutex_lock(&mddev->sync_mutex);
>>          clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
>> +       stop_sync_thread(mddev, true, true);
>> +       mutex_unlock(&mddev->sync_mutex);
>> +}
>> +EXPORT_SYMBOL_GPL(md_idle_sync_thread);
>> +
>> +void md_frozen_sync_thread(struct mddev *mddev)
>> +{
>> +       lockdep_assert_held(mddev->reconfig_mutex);
>> +
>> +       mutex_lock(&mddev->sync_mutex);
>> +       set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
>> +       stop_sync_thread(mddev, true, false);
>> +       mutex_unlock(&mddev->sync_mutex);
>> +}
>> +EXPORT_SYMBOL_GPL(md_frozen_sync_thread);
>>
>> +void md_unfrozen_sync_thread(struct mddev *mddev)
>> +{
>> +       lockdep_assert_held(mddev->reconfig_mutex);
>> +
>> +       mutex_lock(&mddev->sync_mutex);
>> +       clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
>> +       set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
>> +       md_wakeup_thread(mddev->thread);
>> +       sysfs_notify_dirent_safe(mddev->sysfs_action);
>> +       mutex_unlock(&mddev->sync_mutex);
>> +}
>> +EXPORT_SYMBOL_GPL(md_unfrozen_sync_thread);
>> +
>> +static void idle_sync_thread(struct mddev *mddev)
>> +{
>>          if (mddev_lock(mddev)) {
>>                  mutex_unlock(&mddev->sync_mutex);
>>                  return;
>>          }
>>
>> +       mutex_lock(&mddev->sync_mutex);
>> +       clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
>>          stop_sync_thread(mddev, false, true);
>>          mutex_unlock(&mddev->sync_mutex);
>>   }
>>
>>   static void frozen_sync_thread(struct mddev *mddev)
>>   {
>> -       mutex_lock(&mddev->sync_mutex);
>> -       set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
>> -
>>          if (mddev_lock(mddev)) {
>>                  mutex_unlock(&mddev->sync_mutex);
>>                  return;
>>          }
>>
>> +       mutex_lock(&mddev->sync_mutex);
>> +       set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
>>          stop_sync_thread(mddev, false, false);
>>          mutex_unlock(&mddev->sync_mutex);
>>   }
>> diff --git a/drivers/md/md.h b/drivers/md/md.h
>> index 8d881cc59799..437ab70ce79b 100644
>> --- a/drivers/md/md.h
>> +++ b/drivers/md/md.h
>> @@ -781,6 +781,9 @@ extern void md_rdev_clear(struct md_rdev *rdev);
>>   extern void md_handle_request(struct mddev *mddev, struct bio *bio);
>>   extern int mddev_suspend(struct mddev *mddev, bool interruptible);
>>   extern void mddev_resume(struct mddev *mddev);
>> +extern void md_idle_sync_thread(struct mddev *mddev);
>> +extern void md_frozen_sync_thread(struct mddev *mddev);
>> +extern void md_unfrozen_sync_thread(struct mddev *mddev);
>>
>>   extern void md_reload_sb(struct mddev *mddev, int raid_disk);
>>   extern void md_update_sb(struct mddev *mddev, int force);
>> --
>> 2.39.2
>>
> 
> .
> 

Re: [PATCH v2 05/11] md: export helpers to stop sync_thread

[Xiao Ni]

On Thu, Jan 25, 2024 at 7:42 PM Yu Kuai <yukuai3@huawei.com> wrote:
>
> Hi,
>
> 在 2024/01/25 19:35, Xiao Ni 写道:
> > Hi all
> >
> > This is the result of lvm2 tests:
> > make check
> > ### 426 tests: 319 passed, 74 skipped, 0 timed out, 5 warned, 28
> > failed   in 56:04.914
>
> Are you testing with this patchset? 28 failed is much more than my
> test result in following:

Yes, 6.7.0-rc8 with this patch set.
>
> > make[1]: *** [Makefile:138: check] Error 1
> > make[1]: Leaving directory '/root/lvm2/test'
> > make: *** [Makefile:89: check] Error 2
> >
> > Do you know where to check which cases fail?
>
> I saved logs and grep keyword "failed:", and the result will look like
> this:

I'll use this way to collect the failed cases.

Regards
Xiao
>
>
> You can find each test log in the dir test/result/
> >
> > Best Regards
> > Xiao
> >
> > On Wed, Jan 24, 2024 at 5:19 PM Yu Kuai <yukuai3@huawei.com> wrote:
> >>
> >> The new heleprs will be used in dm-raid in later patches to fix
> >> regressions and prevent calling md_reap_sync_thread() directly.
> >>
> >> Signed-off-by: Yu Kuai <yukuai3@huawei.com>
> >> ---
> >>   drivers/md/md.c | 41 +++++++++++++++++++++++++++++++++++++----
> >>   drivers/md/md.h |  3 +++
> >>   2 files changed, 40 insertions(+), 4 deletions(-)
> >>
> >> diff --git a/drivers/md/md.c b/drivers/md/md.c
> >> index 6c5d0a372927..90cf31b53804 100644
> >> --- a/drivers/md/md.c
> >> +++ b/drivers/md/md.c
> >> @@ -4915,30 +4915,63 @@ static void stop_sync_thread(struct mddev *mddev, bool locked, bool check_seq)
> >>                  mddev_lock_nointr(mddev);
> >>   }
> >>
> >> -static void idle_sync_thread(struct mddev *mddev)
> >> +void md_idle_sync_thread(struct mddev *mddev)
> >>   {
> >> +       lockdep_assert_held(mddev->reconfig_mutex);
> >> +
> >>          mutex_lock(&mddev->sync_mutex);
> >>          clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
> >> +       stop_sync_thread(mddev, true, true);
> >> +       mutex_unlock(&mddev->sync_mutex);
> >> +}
> >> +EXPORT_SYMBOL_GPL(md_idle_sync_thread);
> >> +
> >> +void md_frozen_sync_thread(struct mddev *mddev)
> >> +{
> >> +       lockdep_assert_held(mddev->reconfig_mutex);
> >> +
> >> +       mutex_lock(&mddev->sync_mutex);
> >> +       set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
> >> +       stop_sync_thread(mddev, true, false);
> >> +       mutex_unlock(&mddev->sync_mutex);
> >> +}
> >> +EXPORT_SYMBOL_GPL(md_frozen_sync_thread);
> >>
> >> +void md_unfrozen_sync_thread(struct mddev *mddev)
> >> +{
> >> +       lockdep_assert_held(mddev->reconfig_mutex);
> >> +
> >> +       mutex_lock(&mddev->sync_mutex);
> >> +       clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
> >> +       set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
> >> +       md_wakeup_thread(mddev->thread);
> >> +       sysfs_notify_dirent_safe(mddev->sysfs_action);
> >> +       mutex_unlock(&mddev->sync_mutex);
> >> +}
> >> +EXPORT_SYMBOL_GPL(md_unfrozen_sync_thread);
> >> +
> >> +static void idle_sync_thread(struct mddev *mddev)
> >> +{
> >>          if (mddev_lock(mddev)) {
> >>                  mutex_unlock(&mddev->sync_mutex);
> >>                  return;
> >>          }
> >>
> >> +       mutex_lock(&mddev->sync_mutex);
> >> +       clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
> >>          stop_sync_thread(mddev, false, true);
> >>          mutex_unlock(&mddev->sync_mutex);
> >>   }
> >>
> >>   static void frozen_sync_thread(struct mddev *mddev)
> >>   {
> >> -       mutex_lock(&mddev->sync_mutex);
> >> -       set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
> >> -
> >>          if (mddev_lock(mddev)) {
> >>                  mutex_unlock(&mddev->sync_mutex);
> >>                  return;
> >>          }
> >>
> >> +       mutex_lock(&mddev->sync_mutex);
> >> +       set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
> >>          stop_sync_thread(mddev, false, false);
> >>          mutex_unlock(&mddev->sync_mutex);
> >>   }
> >> diff --git a/drivers/md/md.h b/drivers/md/md.h
> >> index 8d881cc59799..437ab70ce79b 100644
> >> --- a/drivers/md/md.h
> >> +++ b/drivers/md/md.h
> >> @@ -781,6 +781,9 @@ extern void md_rdev_clear(struct md_rdev *rdev);
> >>   extern void md_handle_request(struct mddev *mddev, struct bio *bio);
> >>   extern int mddev_suspend(struct mddev *mddev, bool interruptible);
> >>   extern void mddev_resume(struct mddev *mddev);
> >> +extern void md_idle_sync_thread(struct mddev *mddev);
> >> +extern void md_frozen_sync_thread(struct mddev *mddev);
> >> +extern void md_unfrozen_sync_thread(struct mddev *mddev);
> >>
> >>   extern void md_reload_sb(struct mddev *mddev, int raid_disk);
> >>   extern void md_update_sb(struct mddev *mddev, int force);
> >> --
> >> 2.39.2
> >>
> >
> > .
> >
>

Re: [PATCH v2 05/11] md: export helpers to stop sync_thread

[Yu Kuai]

Hi,

在 2024/01/25 19:52, Xiao Ni 写道:
> On Thu, Jan 25, 2024 at 7:42 PM Yu Kuai <yukuai3@huawei.com> wrote:
>>
>> Hi,
>>
>> 在 2024/01/25 19:35, Xiao Ni 写道:
>>> Hi all
>>>
>>> This is the result of lvm2 tests:
>>> make check
>>> ### 426 tests: 319 passed, 74 skipped, 0 timed out, 5 warned, 28
>>> failed   in 56:04.914
>>
>> Are you testing with this patchset? 28 failed is much more than my
>> test result in following:
> 
> Yes, 6.7.0-rc8 with this patch set.
>>
>>> make[1]: *** [Makefile:138: check] Error 1
>>> make[1]: Leaving directory '/root/lvm2/test'
>>> make: *** [Makefile:89: check] Error 2
>>>
>>> Do you know where to check which cases fail?
>>
>> I saved logs and grep keyword "failed:", and the result will look like
>> this:
> 
> I'll use this way to collect the failed cases.

I somehow send out this draft. Please check the other reply.

Kuai
> 
> Regards
> Xiao
>>
>>
>> You can find each test log in the dir test/result/
>>>
>>> Best Regards
>>> Xiao
>>>
>>> On Wed, Jan 24, 2024 at 5:19 PM Yu Kuai <yukuai3@huawei.com> wrote:
>>>>
>>>> The new heleprs will be used in dm-raid in later patches to fix
>>>> regressions and prevent calling md_reap_sync_thread() directly.
>>>>
>>>> Signed-off-by: Yu Kuai <yukuai3@huawei.com>
>>>> ---
>>>>    drivers/md/md.c | 41 +++++++++++++++++++++++++++++++++++++----
>>>>    drivers/md/md.h |  3 +++
>>>>    2 files changed, 40 insertions(+), 4 deletions(-)
>>>>
>>>> diff --git a/drivers/md/md.c b/drivers/md/md.c
>>>> index 6c5d0a372927..90cf31b53804 100644
>>>> --- a/drivers/md/md.c
>>>> +++ b/drivers/md/md.c
>>>> @@ -4915,30 +4915,63 @@ static void stop_sync_thread(struct mddev *mddev, bool locked, bool check_seq)
>>>>                   mddev_lock_nointr(mddev);
>>>>    }
>>>>
>>>> -static void idle_sync_thread(struct mddev *mddev)
>>>> +void md_idle_sync_thread(struct mddev *mddev)
>>>>    {
>>>> +       lockdep_assert_held(mddev->reconfig_mutex);
>>>> +
>>>>           mutex_lock(&mddev->sync_mutex);
>>>>           clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
>>>> +       stop_sync_thread(mddev, true, true);
>>>> +       mutex_unlock(&mddev->sync_mutex);
>>>> +}
>>>> +EXPORT_SYMBOL_GPL(md_idle_sync_thread);
>>>> +
>>>> +void md_frozen_sync_thread(struct mddev *mddev)
>>>> +{
>>>> +       lockdep_assert_held(mddev->reconfig_mutex);
>>>> +
>>>> +       mutex_lock(&mddev->sync_mutex);
>>>> +       set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
>>>> +       stop_sync_thread(mddev, true, false);
>>>> +       mutex_unlock(&mddev->sync_mutex);
>>>> +}
>>>> +EXPORT_SYMBOL_GPL(md_frozen_sync_thread);
>>>>
>>>> +void md_unfrozen_sync_thread(struct mddev *mddev)
>>>> +{
>>>> +       lockdep_assert_held(mddev->reconfig_mutex);
>>>> +
>>>> +       mutex_lock(&mddev->sync_mutex);
>>>> +       clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
>>>> +       set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
>>>> +       md_wakeup_thread(mddev->thread);
>>>> +       sysfs_notify_dirent_safe(mddev->sysfs_action);
>>>> +       mutex_unlock(&mddev->sync_mutex);
>>>> +}
>>>> +EXPORT_SYMBOL_GPL(md_unfrozen_sync_thread);
>>>> +
>>>> +static void idle_sync_thread(struct mddev *mddev)
>>>> +{
>>>>           if (mddev_lock(mddev)) {
>>>>                   mutex_unlock(&mddev->sync_mutex);
>>>>                   return;
>>>>           }
>>>>
>>>> +       mutex_lock(&mddev->sync_mutex);
>>>> +       clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
>>>>           stop_sync_thread(mddev, false, true);
>>>>           mutex_unlock(&mddev->sync_mutex);
>>>>    }
>>>>
>>>>    static void frozen_sync_thread(struct mddev *mddev)
>>>>    {
>>>> -       mutex_lock(&mddev->sync_mutex);
>>>> -       set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
>>>> -
>>>>           if (mddev_lock(mddev)) {
>>>>                   mutex_unlock(&mddev->sync_mutex);
>>>>                   return;
>>>>           }
>>>>
>>>> +       mutex_lock(&mddev->sync_mutex);
>>>> +       set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
>>>>           stop_sync_thread(mddev, false, false);
>>>>           mutex_unlock(&mddev->sync_mutex);
>>>>    }
>>>> diff --git a/drivers/md/md.h b/drivers/md/md.h
>>>> index 8d881cc59799..437ab70ce79b 100644
>>>> --- a/drivers/md/md.h
>>>> +++ b/drivers/md/md.h
>>>> @@ -781,6 +781,9 @@ extern void md_rdev_clear(struct md_rdev *rdev);
>>>>    extern void md_handle_request(struct mddev *mddev, struct bio *bio);
>>>>    extern int mddev_suspend(struct mddev *mddev, bool interruptible);
>>>>    extern void mddev_resume(struct mddev *mddev);
>>>> +extern void md_idle_sync_thread(struct mddev *mddev);
>>>> +extern void md_frozen_sync_thread(struct mddev *mddev);
>>>> +extern void md_unfrozen_sync_thread(struct mddev *mddev);
>>>>
>>>>    extern void md_reload_sb(struct mddev *mddev, int raid_disk);
>>>>    extern void md_update_sb(struct mddev *mddev, int force);
>>>> --
>>>> 2.39.2
>>>>
>>>
>>> .
>>>
>>
> 
> 
> .
> 

Re: [PATCH v2 05/11] md: export helpers to stop sync_thread

[Xiao Ni]

Hi all

I build the kernel 6.7.0-rc8 with this patch set. The lvm2 regression
test result:
###       failed: [ndev-vanilla] shell/integrity.sh
###       failed: [ndev-vanilla] shell/lvchange-partial-raid10.sh
###       failed: [ndev-vanilla] shell/lvchange-raid-transient-failures.sh
###       failed: [ndev-vanilla] shell/lvchange-raid10.sh
###       failed: [ndev-vanilla] shell/lvchange-rebuild-raid.sh
###       failed: [ndev-vanilla] shell/lvconvert-cache-abort.sh
###       failed: [ndev-vanilla] shell/lvconvert-raid-regionsize.sh
###       failed: [ndev-vanilla]
shell/lvconvert-raid-reshape-linear_to_raid6-single-type.sh
###       failed: [ndev-vanilla] shell/lvconvert-raid-reshape.sh
###       failed: [ndev-vanilla] shell/lvconvert-raid-takeover-alloc-failure.sh
###       failed: [ndev-vanilla] shell/lvconvert-raid-takeover-thin.sh
###       failed: [ndev-vanilla] shell/lvconvert-raid-takeover.sh
###       failed: [ndev-vanilla] shell/lvconvert-raid0-striped.sh
###       failed: [ndev-vanilla] shell/lvconvert-raid0_to_raid10.sh
###       failed: [ndev-vanilla] shell/lvconvert-raid10.sh
###       failed: [ndev-vanilla] shell/lvconvert-raid5_to_raid10.sh
###       failed: [ndev-vanilla] shell/lvconvert-repair-raid.sh
###       failed: [ndev-vanilla] shell/lvconvert-striped-raid0.sh
###       failed: [ndev-vanilla] shell/lvcreate-large-raid10.sh
###       failed: [ndev-vanilla] shell/lvcreate-raid-nosync.sh
###       failed: [ndev-vanilla] shell/lvcreate-raid10.sh
###       failed: [ndev-vanilla] shell/lvdisplay-raid.sh
###       failed: [ndev-vanilla] shell/lvextend-thin-raid.sh
###       failed: [ndev-vanilla] shell/lvresize-fs-crypt.sh
###       failed: [ndev-vanilla] shell/lvresize-raid.sh
###       failed: [ndev-vanilla] shell/lvresize-raid10.sh
###       failed: [ndev-vanilla] shell/pvck-dump.sh
###       failed: [ndev-vanilla] shell/pvmove-raid-segtypes.sh
###       failed: [ndev-vanilla] shell/select-report.sh

Regards
Xiao

On Wed, Jan 24, 2024 at 5:19 PM Yu Kuai <yukuai3@huawei.com> wrote:
>
> The new heleprs will be used in dm-raid in later patches to fix
> regressions and prevent calling md_reap_sync_thread() directly.
>
> Signed-off-by: Yu Kuai <yukuai3@huawei.com>
> ---
>  drivers/md/md.c | 41 +++++++++++++++++++++++++++++++++++++----
>  drivers/md/md.h |  3 +++
>  2 files changed, 40 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/md/md.c b/drivers/md/md.c
> index 6c5d0a372927..90cf31b53804 100644
> --- a/drivers/md/md.c
> +++ b/drivers/md/md.c
> @@ -4915,30 +4915,63 @@ static void stop_sync_thread(struct mddev *mddev, bool locked, bool check_seq)
>                 mddev_lock_nointr(mddev);
>  }
>
> -static void idle_sync_thread(struct mddev *mddev)
> +void md_idle_sync_thread(struct mddev *mddev)
>  {
> +       lockdep_assert_held(mddev->reconfig_mutex);
> +
>         mutex_lock(&mddev->sync_mutex);
>         clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
> +       stop_sync_thread(mddev, true, true);
> +       mutex_unlock(&mddev->sync_mutex);
> +}
> +EXPORT_SYMBOL_GPL(md_idle_sync_thread);
> +
> +void md_frozen_sync_thread(struct mddev *mddev)
> +{
> +       lockdep_assert_held(mddev->reconfig_mutex);
> +
> +       mutex_lock(&mddev->sync_mutex);
> +       set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
> +       stop_sync_thread(mddev, true, false);
> +       mutex_unlock(&mddev->sync_mutex);
> +}
> +EXPORT_SYMBOL_GPL(md_frozen_sync_thread);
>
> +void md_unfrozen_sync_thread(struct mddev *mddev)
> +{
> +       lockdep_assert_held(mddev->reconfig_mutex);
> +
> +       mutex_lock(&mddev->sync_mutex);
> +       clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
> +       set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
> +       md_wakeup_thread(mddev->thread);
> +       sysfs_notify_dirent_safe(mddev->sysfs_action);
> +       mutex_unlock(&mddev->sync_mutex);
> +}
> +EXPORT_SYMBOL_GPL(md_unfrozen_sync_thread);
> +
> +static void idle_sync_thread(struct mddev *mddev)
> +{
>         if (mddev_lock(mddev)) {
>                 mutex_unlock(&mddev->sync_mutex);
>                 return;
>         }
>
> +       mutex_lock(&mddev->sync_mutex);
> +       clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
>         stop_sync_thread(mddev, false, true);
>         mutex_unlock(&mddev->sync_mutex);
>  }
>
>  static void frozen_sync_thread(struct mddev *mddev)
>  {
> -       mutex_lock(&mddev->sync_mutex);
> -       set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
> -
>         if (mddev_lock(mddev)) {
>                 mutex_unlock(&mddev->sync_mutex);
>                 return;
>         }
>
> +       mutex_lock(&mddev->sync_mutex);
> +       set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
>         stop_sync_thread(mddev, false, false);
>         mutex_unlock(&mddev->sync_mutex);
>  }
> diff --git a/drivers/md/md.h b/drivers/md/md.h
> index 8d881cc59799..437ab70ce79b 100644
> --- a/drivers/md/md.h
> +++ b/drivers/md/md.h
> @@ -781,6 +781,9 @@ extern void md_rdev_clear(struct md_rdev *rdev);
>  extern void md_handle_request(struct mddev *mddev, struct bio *bio);
>  extern int mddev_suspend(struct mddev *mddev, bool interruptible);
>  extern void mddev_resume(struct mddev *mddev);
> +extern void md_idle_sync_thread(struct mddev *mddev);
> +extern void md_frozen_sync_thread(struct mddev *mddev);
> +extern void md_unfrozen_sync_thread(struct mddev *mddev);
>
>  extern void md_reload_sb(struct mddev *mddev, int raid_disk);
>  extern void md_update_sb(struct mddev *mddev, int force);
> --
> 2.39.2
>

Re: [PATCH v2 05/11] md: export helpers to stop sync_thread

[Song Liu]

Hi Xiao,

On Thu, Jan 25, 2024 at 5:33 AM Xiao Ni <xni@redhat.com> wrote:
>
> Hi all
>
> I build the kernel 6.7.0-rc8 with this patch set. The lvm2 regression
> test result:

I believe the patchset is built on top of upstream (6.8-rc1). There are
quite some md and dm changes between 6.7-rc8 and 6.8-rc1. Could
you please rerun the test on top of 6.8-rc1? Once we identify the right
set of fixes, we will see which ones to back port to older kernels.

Thanks,
Song

> ###       failed: [ndev-vanilla] shell/integrity.sh
> ###       failed: [ndev-vanilla] shell/lvchange-partial-raid10.sh
> ###       failed: [ndev-vanilla] shell/lvchange-raid-transient-failures.sh
> ###       failed: [ndev-vanilla] shell/lvchange-raid10.sh
> ###       failed: [ndev-vanilla] shell/lvchange-rebuild-raid.sh
> ###       failed: [ndev-vanilla] shell/lvconvert-cache-abort.sh
> ###       failed: [ndev-vanilla] shell/lvconvert-raid-regionsize.sh
> ###       failed: [ndev-vanilla]
> shell/lvconvert-raid-reshape-linear_to_raid6-single-type.sh
> ###       failed: [ndev-vanilla] shell/lvconvert-raid-reshape.sh
> ###       failed: [ndev-vanilla] shell/lvconvert-raid-takeover-alloc-failure.sh
> ###       failed: [ndev-vanilla] shell/lvconvert-raid-takeover-thin.sh
> ###       failed: [ndev-vanilla] shell/lvconvert-raid-takeover.sh
> ###       failed: [ndev-vanilla] shell/lvconvert-raid0-striped.sh
> ###       failed: [ndev-vanilla] shell/lvconvert-raid0_to_raid10.sh
> ###       failed: [ndev-vanilla] shell/lvconvert-raid10.sh
> ###       failed: [ndev-vanilla] shell/lvconvert-raid5_to_raid10.sh
> ###       failed: [ndev-vanilla] shell/lvconvert-repair-raid.sh
> ###       failed: [ndev-vanilla] shell/lvconvert-striped-raid0.sh
> ###       failed: [ndev-vanilla] shell/lvcreate-large-raid10.sh
> ###       failed: [ndev-vanilla] shell/lvcreate-raid-nosync.sh
> ###       failed: [ndev-vanilla] shell/lvcreate-raid10.sh
> ###       failed: [ndev-vanilla] shell/lvdisplay-raid.sh
> ###       failed: [ndev-vanilla] shell/lvextend-thin-raid.sh
> ###       failed: [ndev-vanilla] shell/lvresize-fs-crypt.sh
> ###       failed: [ndev-vanilla] shell/lvresize-raid.sh
> ###       failed: [ndev-vanilla] shell/lvresize-raid10.sh
> ###       failed: [ndev-vanilla] shell/pvck-dump.sh
> ###       failed: [ndev-vanilla] shell/pvmove-raid-segtypes.sh
> ###       failed: [ndev-vanilla] shell/select-report.sh

Re: [PATCH v2 05/11] md: export helpers to stop sync_thread

[Yu Kuai]

Hi,

在 2024/01/25 15:57, Yu Kuai 写道:
> Hi,
> 
> 在 2024/01/25 15:51, Xiao Ni 写道:
>> On Wed, Jan 24, 2024 at 5:19 PM Yu Kuai <yukuai3@huawei.com> wrote:
>>>
>>> The new heleprs will be used in dm-raid in later patches to fix
>>> regressions and prevent calling md_reap_sync_thread() directly.
>>>
>>> Signed-off-by: Yu Kuai <yukuai3@huawei.com>
>>> ---
>>>   drivers/md/md.c | 41 +++++++++++++++++++++++++++++++++++++----
>>>   drivers/md/md.h |  3 +++
>>>   2 files changed, 40 insertions(+), 4 deletions(-)
>>>
>>> diff --git a/drivers/md/md.c b/drivers/md/md.c
>>> index 6c5d0a372927..90cf31b53804 100644
>>> --- a/drivers/md/md.c
>>> +++ b/drivers/md/md.c
>>> @@ -4915,30 +4915,63 @@ static void stop_sync_thread(struct mddev 
>>> *mddev, bool locked, bool check_seq)
>>>                  mddev_lock_nointr(mddev);
>>>   }
>>>
>>> -static void idle_sync_thread(struct mddev *mddev)
>>> +void md_idle_sync_thread(struct mddev *mddev)
>>>   {
>>> +       lockdep_assert_held(mddev->reconfig_mutex);
>>> +
>>
>> Hi Kuai
>>
>> There is a building error. It should give a pointer to
>> lockdep_assert_held. And same with the other two places in this patch.
> 
> Yes, I forgot that I disabled all the debug config in order to let tests
> finish quickly.

I enabled these debuging conifg, and turns out this patch has some
problem, see below.
> 
> Thanks for the notince, will fix this in v3.
> 
> Thanks,
> Kuai
> 
>>
>> Regards
>> Xiao
>>
>>>          mutex_lock(&mddev->sync_mutex);
>>>          clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
>>> +       stop_sync_thread(mddev, true, true);
>>> +       mutex_unlock(&mddev->sync_mutex);
>>> +}
>>> +EXPORT_SYMBOL_GPL(md_idle_sync_thread);
>>> +
>>> +void md_frozen_sync_thread(struct mddev *mddev)
>>> +{
>>> +       lockdep_assert_held(mddev->reconfig_mutex);
>>> +
>>> +       mutex_lock(&mddev->sync_mutex);
>>> +       set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
>>> +       stop_sync_thread(mddev, true, false);

stop_sync_thread() may release 'reconfig_mutex' and grab it again, hence
it's not right to grab 'sync_mutex' before 'reconfig_mutex'.

Since 'sync_mutex' is introduced to serialize sysfs api 'sync_action'
writers, while is not involved for dm-raid. I'll remove 'sync_mutex' for
the new helper in v3.

Thanks,
Kuai

>>> +       mutex_unlock(&mddev->sync_mutex);
>>> +}
>>> +EXPORT_SYMBOL_GPL(md_frozen_sync_thread);
>>>
>>> +void md_unfrozen_sync_thread(struct mddev *mddev)
>>> +{
>>> +       lockdep_assert_held(mddev->reconfig_mutex);
>>> +
>>> +       mutex_lock(&mddev->sync_mutex);
>>> +       clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
>>> +       set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
>>> +       md_wakeup_thread(mddev->thread);
>>> +       sysfs_notify_dirent_safe(mddev->sysfs_action);
>>> +       mutex_unlock(&mddev->sync_mutex);
>>> +}
>>> +EXPORT_SYMBOL_GPL(md_unfrozen_sync_thread);
>>> +
>>> +static void idle_sync_thread(struct mddev *mddev)
>>> +{
>>>          if (mddev_lock(mddev)) {
>>>                  mutex_unlock(&mddev->sync_mutex);
>>>                  return;
>>>          }
>>>
>>> +       mutex_lock(&mddev->sync_mutex);
>>> +       clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
>>>          stop_sync_thread(mddev, false, true);
>>>          mutex_unlock(&mddev->sync_mutex);
>>>   }
>>>
>>>   static void frozen_sync_thread(struct mddev *mddev)
>>>   {
>>> -       mutex_lock(&mddev->sync_mutex);
>>> -       set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
>>> -
>>>          if (mddev_lock(mddev)) {
>>>                  mutex_unlock(&mddev->sync_mutex);
>>>                  return;
>>>          }
>>>
>>> +       mutex_lock(&mddev->sync_mutex);
>>> +       set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
>>>          stop_sync_thread(mddev, false, false);
>>>          mutex_unlock(&mddev->sync_mutex);
>>>   }
>>> diff --git a/drivers/md/md.h b/drivers/md/md.h
>>> index 8d881cc59799..437ab70ce79b 100644
>>> --- a/drivers/md/md.h
>>> +++ b/drivers/md/md.h
>>> @@ -781,6 +781,9 @@ extern void md_rdev_clear(struct md_rdev *rdev);
>>>   extern void md_handle_request(struct mddev *mddev, struct bio *bio);
>>>   extern int mddev_suspend(struct mddev *mddev, bool interruptible);
>>>   extern void mddev_resume(struct mddev *mddev);
>>> +extern void md_idle_sync_thread(struct mddev *mddev);
>>> +extern void md_frozen_sync_thread(struct mddev *mddev);
>>> +extern void md_unfrozen_sync_thread(struct mddev *mddev);
>>>
>>>   extern void md_reload_sb(struct mddev *mddev, int raid_disk);
>>>   extern void md_update_sb(struct mddev *mddev, int force);
>>> -- 
>>> 2.39.2
>>>
>>
>> .
>>
> 
> .
> 

Re: [PATCH v2 05/11] md: export helpers to stop sync_thread

[Xiao Ni]

On Fri, Jan 26, 2024 at 8:14 AM Song Liu <song@kernel.org> wrote:
>
> Hi Xiao,
>
> On Thu, Jan 25, 2024 at 5:33 AM Xiao Ni <xni@redhat.com> wrote:
> >
> > Hi all
> >
> > I build the kernel 6.7.0-rc8 with this patch set. The lvm2 regression
> > test result:
>
> I believe the patchset is built on top of upstream (6.8-rc1). There are
> quite some md and dm changes between 6.7-rc8 and 6.8-rc1. Could
> you please rerun the test on top of 6.8-rc1? Once we identify the right
> set of fixes, we will see which ones to back port to older kernels.
>
> Thanks,
> Song

Hi all

I tried to run tests on 6.8-rc1, the failure number increases to 72.

And I ran the tests on 6.6, there are only 4 failed cases
###       failed: [ndev-vanilla] shell/lvconvert-cache-abort.sh
###       failed: [ndev-vanilla] shell/lvresize-fs-crypt.sh
###       failed: [ndev-vanilla] shell/pvck-dump.sh
###       failed: [ndev-vanilla] shell/select-report.sh

Best Regards
Xiao