Re: [PATCH 05/12] arm64: dts: Add I2C nodes for Hi3660

[Rob Herring <robh@kernel.org>]

On Tue, May 23, 2017 at 1:36 AM, zhangfei <zhangfei.gao@linaro.org> wrote:
>
>
> On 2017年05月23日 13:55, zhangfei wrote:
>>
>> Hi, Rob
>>
>>
>> Thanks for the review.
>>
>> On 2017年05月23日 08:39, Rob Herring wrote:
>>>
>>> On Wed, May 17, 2017 at 04:37:38PM +0800, Guodong Xu wrote:
>>>>
>>>> From: Zhangfei Gao <zhangfei.gao@linaro.org>
>>>>
>>>> Add I2C nodes for Hi3660-hikey960.
>>>>
>>>> On HiKey960,
>>>> I2C0, I2C7 is connected to Low Speed Expansion Connector.
>>>> I2C1 is connected to ADV7535.
>>>> I2C3 is connected to USB5734.
>>>>
>>>> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
>>>> Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
>>>> ---
>>>>   arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 18 ++++++++
>>>>   arch/arm64/boot/dts/hisilicon/hi3660.dtsi         | 56
>>>> +++++++++++++++++++++++
>>>>   2 files changed, 74 insertions(+)
>>>>
>>>> diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
>>>> b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
>>>> index 64875a5..f685b1e 100644
>>>> --- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
>>>> +++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
>>>> @@ -29,6 +29,24 @@
>>>>       };
>>>>   };
>>>>   +&i2c0 {
>>>> +    status = "okay";
>>>> +};
>>>> +
>>>> +&i2c1 {
>>>> +    status = "okay";
>>>> +
>>>> +    adv7533: adv7533@39 {
>>>> +        status = "ok";
>>>> +        compatible = "adi,adv7533";
>>>> +        reg = <0x39>;
>>>> +    };
>>>> +};
>>>> +
>>>> +&i2c7 {
>>>> +    status = "okay";
>>>> +};
>>>
>>> labels for the LS connector?
>
>
> Do you mean arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
>
>                 i2c@78ba000 {
>                 /* On Low speed expansion */
>                         label = "LS-I2C1";
>                         status = "okay";
>                 };
>
>                 spi@78b7000 {
>                 /* On High speed expansion */
>                         label = "HS-SPI1";
>                         status = "okay";
>                 };

Yes. And the names need to align across boards to be useful.

Rob