[PATCH v2 1/2] dt-bindings: iio: tsl2772: convert bindings to YAML format

[PATCH v2 1/2] dt-bindings: iio: tsl2772: convert bindings to YAML format

[Brian Masney]

Convert the tsl2772 device tree bindings to the new YAML format.

Signed-off-by: Brian Masney <masneyb@onstation.org>
---
Changes since v1:
- Dropped description from reg and interrupts properties.
- Dropped $ref from led-max-microamp, vdd-supply, and vddio-supply.
- Changed 'tsl2772@39' in example to 'proximity-sensor@39'

 .../devicetree/bindings/iio/light/tsl2772.txt | 42 ----------
 .../bindings/iio/light/tsl2772.yaml           | 80 +++++++++++++++++++
 2 files changed, 80 insertions(+), 42 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/iio/light/tsl2772.txt
 create mode 100644 Documentation/devicetree/bindings/iio/light/tsl2772.yaml

diff --git a/Documentation/devicetree/bindings/iio/light/tsl2772.txt b/Documentation/devicetree/bindings/iio/light/tsl2772.txt
deleted file mode 100644
index 1c5e6f17a1df..000000000000
--- a/Documentation/devicetree/bindings/iio/light/tsl2772.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-* AMS/TAOS ALS and proximity sensor
-
-Required properties:
-
-  - compatible: Should be one of
-		"amstaos,tsl2571"
-		"amstaos,tsl2671"
-		"amstaos,tmd2671"
-		"amstaos,tsl2771"
-		"amstaos,tmd2771"
-		"amstaos,tsl2572"
-		"amstaos,tsl2672"
-		"amstaos,tmd2672"
-		"amstaos,tsl2772"
-		"amstaos,tmd2772"
-		"avago,apds9930"
-  - reg: the I2C address of the device
-
-Optional properties:
-
-  - amstaos,proximity-diodes - proximity diodes to enable. <0>, <1>, or <0 1>
-                               are the only valid values.
-  - led-max-microamp - current for the proximity LED. Must be 100000, 50000,
-                       25000, or 13000.
-  - vdd-supply: phandle to the regulator that provides power to the sensor.
-  - vddio-supply: phandle to the regulator that provides power to the bus.
-  - interrupts: the sole interrupt generated by the device
-
-  Refer to interrupt-controller/interrupts.txt for generic interrupt client
-  node bindings.
-
-Example:
-
-tsl2772@39 {
-	compatible = "amstaos,tsl2772";
-	reg = <0x39>;
-	interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>;
-	vdd-supply = <&pm8941_l17>;
-	vddio-supply = <&pm8941_lvs1>;
-	amstaos,proximity-diodes = <0>;
-	led-max-microamp = <100000>;
-};
diff --git a/Documentation/devicetree/bindings/iio/light/tsl2772.yaml b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml
new file mode 100644
index 000000000000..2ebc8d727f09
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/tsl2772.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AMS/TAOS Ambient Light Sensor (ALS) and Proximity Detector
+
+maintainers:
+  - Brian Masney <masneyb@onstation.org>
+
+description: |
+  Ambient light sensing and proximity detection with an i2c interface.
+  https://ams.com/documents/20143/36005/TSL2772_DS000181_2-00.pdf
+
+properties:
+  compatible:
+    enum:
+      - amstaos,tsl2571
+      - amstaos,tsl2671
+      - amstaos,tmd2671
+      - amstaos,tsl2771
+      - amstaos,tmd2771
+      - amstaos,tsl2572
+      - amstaos,tsl2672
+      - amstaos,tmd2672
+      - amstaos,tsl2772
+      - amstaos,tmd2772
+      - avago,apds9930
+
+  reg:
+    maxItems: 1
+
+  amstaos,proximity-diodes:
+    description: Proximity diodes to enable
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+      - minItems: 1
+        maxItems: 2
+        items:
+          minimum: 0
+          maximum: 1
+
+  interrupts:
+    maxItems: 1
+
+  led-max-microamp:
+    description: Current for the proximity LED
+    allOf:
+      - enum: [13000, 25000, 50000, 100000]
+
+  vdd-supply:
+    description: Regulator that provides power to the sensor
+
+  vddio-supply:
+    description: Regulator that provides power to the bus
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        proximity-sensor@39 {
+                compatible = "amstaos,tsl2772";
+                reg = <0x39>;
+                interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>;
+                vdd-supply = <&pm8941_l17>;
+                vddio-supply = <&pm8941_lvs1>;
+                amstaos,proximity-diodes = <0>;
+                led-max-microamp = <100000>;
+        };
+    };
+...
-- 
2.20.1

[PATCH v2 2/2] dt-bindings: iio: tsl2583: convert bindings to YAML format

[Brian Masney]

Convert the tsl2583 device tree bindings to the new YAML format.

Signed-off-by: Brian Masney <masneyb@onstation.org>
---
Changes since v1:
- Dropped description from reg and interrupts properties.
- Dropped $ref from vcc-supply property.
- Changed 'tsl2581@29' in example to 'als-sensor@29'

I can no longer find the data sheet for this device linked on AMS's
site. The datasheet is still on Digikey [1], however I didn't include it
in the binding document since I assume that we should only link to the
manufacturer's website.
https://media.digikey.com/pdf/Data%20Sheets/Austriamicrosystems%20PDFs/TSL2581,83.pdf

 .../devicetree/bindings/iio/light/tsl2583.txt | 25 ----------
 .../bindings/iio/light/tsl2583.yaml           | 46 +++++++++++++++++++
 2 files changed, 46 insertions(+), 25 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/iio/light/tsl2583.txt
 create mode 100644 Documentation/devicetree/bindings/iio/light/tsl2583.yaml

diff --git a/Documentation/devicetree/bindings/iio/light/tsl2583.txt b/Documentation/devicetree/bindings/iio/light/tsl2583.txt
deleted file mode 100644
index 059dffa1829a..000000000000
--- a/Documentation/devicetree/bindings/iio/light/tsl2583.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-* TAOS TSL 2580/2581/2583 ALS sensor
-
-Required properties:
-
-  - compatible: Should be one of
-		"amstaos,tsl2580"
-		"amstaos,tsl2581"
-		"amstaos,tsl2583"
-  - reg: the I2C address of the device
-
-Optional properties:
-
-  - interrupts: the sole interrupt generated by the device
-
-  Refer to interrupt-controller/interrupts.txt for generic interrupt client
-  node bindings.
-
-  - vcc-supply: phandle to the regulator that provides power to the sensor.
-
-Example:
-
-tsl2581@29 {
-	compatible = "amstaos,tsl2581";
-	reg = <0x29>;
-};
diff --git a/Documentation/devicetree/bindings/iio/light/tsl2583.yaml b/Documentation/devicetree/bindings/iio/light/tsl2583.yaml
new file mode 100644
index 000000000000..6989a8a54c5c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/tsl2583.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/tsl2583.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AMS/TAOS Ambient Light Sensor (ALS)
+
+maintainers:
+  - Brian Masney <masneyb@onstation.org>
+
+description: |
+  Ambient light sensing with an i2c interface.
+
+properties:
+  compatible:
+    enum:
+      - amstaos,tsl2580
+      - amstaos,tsl2581
+      - amstaos,tsl2583
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vcc-supply:
+    description: Regulator that provides power to the sensor
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        als-sensor@29 {
+                compatible = "amstaos,tsl2581";
+                reg = <0x29>;
+        };
+    };
+...
-- 
2.20.1

Re: [PATCH v2 1/2] dt-bindings: iio: tsl2772: convert bindings to YAML format

[Brian Masney]

On Wed, Apr 24, 2019 at 05:22:37AM -0400, Brian Masney wrote:
> Convert the tsl2772 device tree bindings to the new YAML format.
> 
> Signed-off-by: Brian Masney <masneyb@onstation.org>
> ---
> Changes since v1:
> - Dropped description from reg and interrupts properties.
> - Dropped $ref from led-max-microamp, vdd-supply, and vddio-supply.
> - Changed 'tsl2772@39' in example to 'proximity-sensor@39'

> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        proximity-sensor@39 {

I didn't think of this until after I sent out that patch, but I think
this example should be 'als-proximity-sensor@39' instead of
'proximity-sensor@39'.

Brian

Re: [PATCH v2 1/2] dt-bindings: iio: tsl2772: convert bindings to YAML format

[Rob Herring]

On Wed, Apr 24, 2019 at 4:22 AM Brian Masney <masneyb@onstation.org> wrote:
>
> Convert the tsl2772 device tree bindings to the new YAML format.
>
> Signed-off-by: Brian Masney <masneyb@onstation.org>
> ---
> Changes since v1:
> - Dropped description from reg and interrupts properties.
> - Dropped $ref from led-max-microamp, vdd-supply, and vddio-supply.
> - Changed 'tsl2772@39' in example to 'proximity-sensor@39'
>
>  .../devicetree/bindings/iio/light/tsl2772.txt | 42 ----------
>  .../bindings/iio/light/tsl2772.yaml           | 80 +++++++++++++++++++
>  2 files changed, 80 insertions(+), 42 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/iio/light/tsl2772.txt
>  create mode 100644 Documentation/devicetree/bindings/iio/light/tsl2772.yaml
>
> diff --git a/Documentation/devicetree/bindings/iio/light/tsl2772.txt b/Documentation/devicetree/bindings/iio/light/tsl2772.txt
> deleted file mode 100644
> index 1c5e6f17a1df..000000000000
> --- a/Documentation/devicetree/bindings/iio/light/tsl2772.txt
> +++ /dev/null
> @@ -1,42 +0,0 @@
> -* AMS/TAOS ALS and proximity sensor
> -
> -Required properties:
> -
> -  - compatible: Should be one of
> -               "amstaos,tsl2571"
> -               "amstaos,tsl2671"
> -               "amstaos,tmd2671"
> -               "amstaos,tsl2771"
> -               "amstaos,tmd2771"
> -               "amstaos,tsl2572"
> -               "amstaos,tsl2672"
> -               "amstaos,tmd2672"
> -               "amstaos,tsl2772"
> -               "amstaos,tmd2772"
> -               "avago,apds9930"
> -  - reg: the I2C address of the device
> -
> -Optional properties:
> -
> -  - amstaos,proximity-diodes - proximity diodes to enable. <0>, <1>, or <0 1>
> -                               are the only valid values.
> -  - led-max-microamp - current for the proximity LED. Must be 100000, 50000,
> -                       25000, or 13000.
> -  - vdd-supply: phandle to the regulator that provides power to the sensor.
> -  - vddio-supply: phandle to the regulator that provides power to the bus.
> -  - interrupts: the sole interrupt generated by the device
> -
> -  Refer to interrupt-controller/interrupts.txt for generic interrupt client
> -  node bindings.
> -
> -Example:
> -
> -tsl2772@39 {
> -       compatible = "amstaos,tsl2772";
> -       reg = <0x39>;
> -       interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>;
> -       vdd-supply = <&pm8941_l17>;
> -       vddio-supply = <&pm8941_lvs1>;
> -       amstaos,proximity-diodes = <0>;
> -       led-max-microamp = <100000>;
> -};
> diff --git a/Documentation/devicetree/bindings/iio/light/tsl2772.yaml b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml
> new file mode 100644
> index 000000000000..2ebc8d727f09
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml
> @@ -0,0 +1,80 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/light/tsl2772.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: AMS/TAOS Ambient Light Sensor (ALS) and Proximity Detector
> +
> +maintainers:
> +  - Brian Masney <masneyb@onstation.org>
> +
> +description: |
> +  Ambient light sensing and proximity detection with an i2c interface.
> +  https://ams.com/documents/20143/36005/TSL2772_DS000181_2-00.pdf
> +
> +properties:
> +  compatible:
> +    enum:
> +      - amstaos,tsl2571
> +      - amstaos,tsl2671
> +      - amstaos,tmd2671
> +      - amstaos,tsl2771
> +      - amstaos,tmd2771
> +      - amstaos,tsl2572
> +      - amstaos,tsl2672
> +      - amstaos,tmd2672
> +      - amstaos,tsl2772
> +      - amstaos,tmd2772
> +      - avago,apds9930
> +
> +  reg:
> +    maxItems: 1
> +
> +  amstaos,proximity-diodes:
> +    description: Proximity diodes to enable
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint32-array
> +      - minItems: 1
> +        maxItems: 2
> +        items:
> +          minimum: 0
> +          maximum: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  led-max-microamp:
> +    description: Current for the proximity LED
> +    allOf:

No need for the allOf here with only one entry.

> +      - enum: [13000, 25000, 50000, 100000]

Re: [PATCH v2 1/2] dt-bindings: iio: tsl2772: convert bindings to YAML format

[Rob Herring]

On Wed, Apr 24, 2019 at 7:26 AM Brian Masney <masneyb@onstation.org> wrote:
>
> On Wed, Apr 24, 2019 at 05:22:37AM -0400, Brian Masney wrote:
> > Convert the tsl2772 device tree bindings to the new YAML format.
> >
> > Signed-off-by: Brian Masney <masneyb@onstation.org>
> > ---
> > Changes since v1:
> > - Dropped description from reg and interrupts properties.
> > - Dropped $ref from led-max-microamp, vdd-supply, and vddio-supply.
> > - Changed 'tsl2772@39' in example to 'proximity-sensor@39'
>
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/irq.h>
> > +
> > +    i2c {
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +
> > +        proximity-sensor@39 {
>
> I didn't think of this until after I sent out that patch, but I think
> this example should be 'als-proximity-sensor@39' instead of
> 'proximity-sensor@39'.

I'd just do 'sensor@39' in that case. We normally use light-sensor for
ALS devices, but we haven't been real consistent here.

Rob

Re: [PATCH v2 2/2] dt-bindings: iio: tsl2583: convert bindings to YAML format

[Rob Herring]

On Wed, Apr 24, 2019 at 4:22 AM Brian Masney <masneyb@onstation.org> wrote:
>
> Convert the tsl2583 device tree bindings to the new YAML format.
>
> Signed-off-by: Brian Masney <masneyb@onstation.org>
> ---
> Changes since v1:
> - Dropped description from reg and interrupts properties.
> - Dropped $ref from vcc-supply property.
> - Changed 'tsl2581@29' in example to 'als-sensor@29'
>
> I can no longer find the data sheet for this device linked on AMS's
> site. The datasheet is still on Digikey [1], however I didn't include it
> in the binding document since I assume that we should only link to the
> manufacturer's website.
> https://media.digikey.com/pdf/Data%20Sheets/Austriamicrosystems%20PDFs/TSL2581,83.pdf
>
>  .../devicetree/bindings/iio/light/tsl2583.txt | 25 ----------
>  .../bindings/iio/light/tsl2583.yaml           | 46 +++++++++++++++++++
>  2 files changed, 46 insertions(+), 25 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/iio/light/tsl2583.txt
>  create mode 100644 Documentation/devicetree/bindings/iio/light/tsl2583.yaml
>
> diff --git a/Documentation/devicetree/bindings/iio/light/tsl2583.txt b/Documentation/devicetree/bindings/iio/light/tsl2583.txt
> deleted file mode 100644
> index 059dffa1829a..000000000000
> --- a/Documentation/devicetree/bindings/iio/light/tsl2583.txt
> +++ /dev/null
> @@ -1,25 +0,0 @@
> -* TAOS TSL 2580/2581/2583 ALS sensor
> -
> -Required properties:
> -
> -  - compatible: Should be one of
> -               "amstaos,tsl2580"
> -               "amstaos,tsl2581"
> -               "amstaos,tsl2583"
> -  - reg: the I2C address of the device
> -
> -Optional properties:
> -
> -  - interrupts: the sole interrupt generated by the device
> -
> -  Refer to interrupt-controller/interrupts.txt for generic interrupt client
> -  node bindings.
> -
> -  - vcc-supply: phandle to the regulator that provides power to the sensor.
> -
> -Example:
> -
> -tsl2581@29 {
> -       compatible = "amstaos,tsl2581";
> -       reg = <0x29>;
> -};
> diff --git a/Documentation/devicetree/bindings/iio/light/tsl2583.yaml b/Documentation/devicetree/bindings/iio/light/tsl2583.yaml
> new file mode 100644
> index 000000000000..6989a8a54c5c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/light/tsl2583.yaml
> @@ -0,0 +1,46 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/light/tsl2583.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: AMS/TAOS Ambient Light Sensor (ALS)
> +
> +maintainers:
> +  - Brian Masney <masneyb@onstation.org>
> +
> +description: |
> +  Ambient light sensing with an i2c interface.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - amstaos,tsl2580
> +      - amstaos,tsl2581
> +      - amstaos,tsl2583
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  vcc-supply:
> +    description: Regulator that provides power to the sensor
> +
> +required:
> +  - compatible
> +  - reg
> +
> +examples:
> +  - |
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        als-sensor@29 {

light-sensor@29

With that,

Reviewed-by: Rob Herring <robh@kernel.org>