* [PATCH v2] dt-bindings: serial: 8250_omap: add rs485-rts-active-high
@ 2023-05-31 11:10 Francesco Dolcini
2023-06-01 10:12 ` Krzysztof Kozlowski
2023-10-19 10:09 ` Geert Uytterhoeven
0 siblings, 2 replies; 7+ messages in thread
From: Francesco Dolcini @ 2023-05-31 11:10 UTC (permalink / raw)
To: Greg Kroah-Hartman, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Vignesh Raghavendra, linux-serial, devicetree
Cc: Francesco Dolcini, linux-kernel
From: Francesco Dolcini <francesco.dolcini@toradex.com>
Add rs485-rts-active-high property, this was removed by mistake.
In general we just use rs485-rts-active-low property, however the OMAP
UART for legacy reason uses the -high one.
Fixes: 767d3467eb60 ("dt-bindings: serial: 8250_omap: drop rs485 properties")
Closes: https://lore.kernel.org/all/ZGefR4mTHHo1iQ7H@francesco-nb.int.toradex.com/
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
---
v2: removed reported-by
---
Documentation/devicetree/bindings/serial/8250_omap.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/serial/8250_omap.yaml b/Documentation/devicetree/bindings/serial/8250_omap.yaml
index eb3488d8f9ee..6a7be42da523 100644
--- a/Documentation/devicetree/bindings/serial/8250_omap.yaml
+++ b/Documentation/devicetree/bindings/serial/8250_omap.yaml
@@ -70,6 +70,7 @@ properties:
dsr-gpios: true
rng-gpios: true
dcd-gpios: true
+ rs485-rts-active-high: true
rts-gpio: true
power-domains: true
clock-frequency: true
--
2.25.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v2] dt-bindings: serial: 8250_omap: add rs485-rts-active-high
2023-05-31 11:10 [PATCH v2] dt-bindings: serial: 8250_omap: add rs485-rts-active-high Francesco Dolcini
@ 2023-06-01 10:12 ` Krzysztof Kozlowski
2023-10-19 10:09 ` Geert Uytterhoeven
1 sibling, 0 replies; 7+ messages in thread
From: Krzysztof Kozlowski @ 2023-06-01 10:12 UTC (permalink / raw)
To: Francesco Dolcini, Greg Kroah-Hartman, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Vignesh Raghavendra,
linux-serial, devicetree
Cc: Francesco Dolcini, linux-kernel
On 31/05/2023 13:10, Francesco Dolcini wrote:
> From: Francesco Dolcini <francesco.dolcini@toradex.com>
>
> Add rs485-rts-active-high property, this was removed by mistake.
> In general we just use rs485-rts-active-low property, however the OMAP
> UART for legacy reason uses the -high one.
>
> Fixes: 767d3467eb60 ("dt-bindings: serial: 8250_omap: drop rs485 properties")
> Closes: https://lore.kernel.org/all/ZGefR4mTHHo1iQ7H@francesco-nb.int.toradex.com/
> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v2] dt-bindings: serial: 8250_omap: add rs485-rts-active-high
2023-05-31 11:10 [PATCH v2] dt-bindings: serial: 8250_omap: add rs485-rts-active-high Francesco Dolcini
2023-06-01 10:12 ` Krzysztof Kozlowski
@ 2023-10-19 10:09 ` Geert Uytterhoeven
2023-10-19 15:05 ` Francesco Dolcini
1 sibling, 1 reply; 7+ messages in thread
From: Geert Uytterhoeven @ 2023-10-19 10:09 UTC (permalink / raw)
To: Francesco Dolcini
Cc: Greg Kroah-Hartman, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Vignesh Raghavendra, linux-serial, devicetree,
Francesco Dolcini, linux-kernel
Hi Francesco,
On Wed, May 31, 2023 at 1:14 PM Francesco Dolcini <francesco@dolcini.it> wrote:
> From: Francesco Dolcini <francesco.dolcini@toradex.com>
>
> Add rs485-rts-active-high property, this was removed by mistake.
> In general we just use rs485-rts-active-low property, however the OMAP
> UART for legacy reason uses the -high one.
>
> Fixes: 767d3467eb60 ("dt-bindings: serial: 8250_omap: drop rs485 properties")
> Closes: https://lore.kernel.org/all/ZGefR4mTHHo1iQ7H@francesco-nb.int.toradex.com/
> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
> ---
> v2: removed reported-by
Thanks for your patch, which is now commit 403e97d6ab2cb6fd
("dt-bindings: serial: 8250_omap: add rs485-rts-active-high")
in v6.4-rc5.
> --- a/Documentation/devicetree/bindings/serial/8250_omap.yaml
> +++ b/Documentation/devicetree/bindings/serial/8250_omap.yaml
> @@ -70,6 +70,7 @@ properties:
> dsr-gpios: true
> rng-gpios: true
> dcd-gpios: true
> + rs485-rts-active-high: true
make dt_binding_check complains:
Documentation/devicetree/bindings/serial/8250_omap.yaml:
rs485-rts-active-high: missing type definition
This property should have been added to
Documentation/devicetree/bindings/serial/serial.yaml first.
> rts-gpio: true
> power-domains: true
> clock-frequency: true
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v2] dt-bindings: serial: 8250_omap: add rs485-rts-active-high
2023-10-19 10:09 ` Geert Uytterhoeven
@ 2023-10-19 15:05 ` Francesco Dolcini
2023-10-19 15:13 ` Geert Uytterhoeven
0 siblings, 1 reply; 7+ messages in thread
From: Francesco Dolcini @ 2023-10-19 15:05 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Francesco Dolcini, Greg Kroah-Hartman, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Vignesh Raghavendra,
linux-serial, devicetree, Francesco Dolcini, linux-kernel
Hello Geert,
On Thu, Oct 19, 2023 at 12:09:06PM +0200, Geert Uytterhoeven wrote:
> On Wed, May 31, 2023 at 1:14 PM Francesco Dolcini <francesco@dolcini.it> wrote:
> > From: Francesco Dolcini <francesco.dolcini@toradex.com>
> >
> > Add rs485-rts-active-high property, this was removed by mistake.
> > In general we just use rs485-rts-active-low property, however the OMAP
> > UART for legacy reason uses the -high one.
> >
> > Fixes: 767d3467eb60 ("dt-bindings: serial: 8250_omap: drop rs485 properties")
> > Closes: https://lore.kernel.org/all/ZGefR4mTHHo1iQ7H@francesco-nb.int.toradex.com/
> > Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
> > ---
> > v2: removed reported-by
>
> Thanks for your patch, which is now commit 403e97d6ab2cb6fd
> ("dt-bindings: serial: 8250_omap: add rs485-rts-active-high")
> in v6.4-rc5.
>
> > --- a/Documentation/devicetree/bindings/serial/8250_omap.yaml
> > +++ b/Documentation/devicetree/bindings/serial/8250_omap.yaml
> > @@ -70,6 +70,7 @@ properties:
> > dsr-gpios: true
> > rng-gpios: true
> > dcd-gpios: true
> > + rs485-rts-active-high: true
>
> make dt_binding_check complains:
>
> Documentation/devicetree/bindings/serial/8250_omap.yaml:
> rs485-rts-active-high: missing type definition
For some reasons it works for me (and worked when I did send the patch)
$ make dt_binding_check DT_SCHEMA_FILES=8250_omap.yaml
...
HOSTCC scripts/dtc/libfdt/fdt_overlay.o
HOSTCC scripts/dtc/fdtoverlay.o
HOSTLD scripts/dtc/fdtoverlay
LINT Documentation/devicetree/bindings
invalid config: unknown option "required" for rule "quoted-strings"
xargs: /usr/bin/yamllint: exited with status 255; aborting
CHKDT Documentation/devicetree/bindings/processed-schema.json
SCHEMA Documentation/devicetree/bindings/processed-schema.json
/home/francesco/Toradex/sources/linux/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml: ignoring, error in schema: properties: qcom,ls-fs-output-impedance-bp
/home/francesco/Toradex/sources/linux/Documentation/devicetree/bindings/arm/vexpress-sysreg.yaml: ignoring, error in schema: properties: gpio-controller
/home/francesco/Toradex/sources/linux/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml: ignoring, error in schema: patternProperties: ^thermistor@: properties: adi,excitation-current-nanoamp
/home/francesco/Toradex/sources/linux/Documentation/devicetree/bindings/iio/adc/adi,ad4130.yaml: ignoring, error in schema: patternProperties: ^channel@([0-9a-f])$: properties: adi,burnout-current-nanoamp
/home/francesco/Toradex/sources/linux/Documentation/devicetree/bindings/iio/addac/adi,ad74115.yaml: ignoring, error in schema: properties: adi,ext2-burnout-current-nanoamp
DTEX Documentation/devicetree/bindings/serial/8250_omap.example.dts
DTC_CHK Documentation/devicetree/bindings/serial/8250_omap.example.dtb
any idea on what could be different between us?
> This property should have been added to
> Documentation/devicetree/bindings/serial/serial.yaml first.
Francesco
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v2] dt-bindings: serial: 8250_omap: add rs485-rts-active-high
2023-10-19 15:05 ` Francesco Dolcini
@ 2023-10-19 15:13 ` Geert Uytterhoeven
2023-10-19 15:37 ` Francesco Dolcini
0 siblings, 1 reply; 7+ messages in thread
From: Geert Uytterhoeven @ 2023-10-19 15:13 UTC (permalink / raw)
To: Francesco Dolcini
Cc: Greg Kroah-Hartman, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Vignesh Raghavendra, linux-serial, devicetree,
Francesco Dolcini, linux-kernel
Hi Franceso,
On Thu, Oct 19, 2023 at 5:05 PM Francesco Dolcini <francesco@dolcini.it> wrote:
> On Thu, Oct 19, 2023 at 12:09:06PM +0200, Geert Uytterhoeven wrote:
> > On Wed, May 31, 2023 at 1:14 PM Francesco Dolcini <francesco@dolcini.it> wrote:
> > > From: Francesco Dolcini <francesco.dolcini@toradex.com>
> > >
> > > Add rs485-rts-active-high property, this was removed by mistake.
> > > In general we just use rs485-rts-active-low property, however the OMAP
> > > UART for legacy reason uses the -high one.
> > >
> > > Fixes: 767d3467eb60 ("dt-bindings: serial: 8250_omap: drop rs485 properties")
> > > Closes: https://lore.kernel.org/all/ZGefR4mTHHo1iQ7H@francesco-nb.int.toradex.com/
> > > Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
> > > ---
> > > v2: removed reported-by
> >
> > Thanks for your patch, which is now commit 403e97d6ab2cb6fd
> > ("dt-bindings: serial: 8250_omap: add rs485-rts-active-high")
> > in v6.4-rc5.
> >
> > > --- a/Documentation/devicetree/bindings/serial/8250_omap.yaml
> > > +++ b/Documentation/devicetree/bindings/serial/8250_omap.yaml
> > > @@ -70,6 +70,7 @@ properties:
> > > dsr-gpios: true
> > > rng-gpios: true
> > > dcd-gpios: true
> > > + rs485-rts-active-high: true
> >
> > make dt_binding_check complains:
> >
> > Documentation/devicetree/bindings/serial/8250_omap.yaml:
> > rs485-rts-active-high: missing type definition
>
> For some reasons it works for me (and worked when I did send the patch)
>
> $ make dt_binding_check DT_SCHEMA_FILES=8250_omap.yaml
> ...
> HOSTCC scripts/dtc/libfdt/fdt_overlay.o
> HOSTCC scripts/dtc/fdtoverlay.o
> HOSTLD scripts/dtc/fdtoverlay
> LINT Documentation/devicetree/bindings
> invalid config: unknown option "required" for rule "quoted-strings"
> xargs: /usr/bin/yamllint: exited with status 255; aborting
> CHKDT Documentation/devicetree/bindings/processed-schema.json
> SCHEMA Documentation/devicetree/bindings/processed-schema.json
> /home/francesco/Toradex/sources/linux/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml: ignoring, error in schema: properties: qcom,ls-fs-output-impedance-bp
> /home/francesco/Toradex/sources/linux/Documentation/devicetree/bindings/arm/vexpress-sysreg.yaml: ignoring, error in schema: properties: gpio-controller
> /home/francesco/Toradex/sources/linux/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml: ignoring, error in schema: patternProperties: ^thermistor@: properties: adi,excitation-current-nanoamp
> /home/francesco/Toradex/sources/linux/Documentation/devicetree/bindings/iio/adc/adi,ad4130.yaml: ignoring, error in schema: patternProperties: ^channel@([0-9a-f])$: properties: adi,burnout-current-nanoamp
> /home/francesco/Toradex/sources/linux/Documentation/devicetree/bindings/iio/addac/adi,ad74115.yaml: ignoring, error in schema: properties: adi,ext2-burnout-current-nanoamp
> DTEX Documentation/devicetree/bindings/serial/8250_omap.example.dts
> DTC_CHK Documentation/devicetree/bindings/serial/8250_omap.example.dtb
>
>
> any idea on what could be different between us?
Are you using the latest dt-schema?
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v2] dt-bindings: serial: 8250_omap: add rs485-rts-active-high
2023-10-19 15:13 ` Geert Uytterhoeven
@ 2023-10-19 15:37 ` Francesco Dolcini
2023-10-19 19:34 ` Rob Herring
0 siblings, 1 reply; 7+ messages in thread
From: Francesco Dolcini @ 2023-10-19 15:37 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Francesco Dolcini, Greg Kroah-Hartman, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Vignesh Raghavendra,
linux-serial, devicetree, Francesco Dolcini, linux-kernel
On Thu, Oct 19, 2023 at 05:13:01PM +0200, Geert Uytterhoeven wrote:
> Hi Franceso,
>
> On Thu, Oct 19, 2023 at 5:05 PM Francesco Dolcini <francesco@dolcini.it> wrote:
> > On Thu, Oct 19, 2023 at 12:09:06PM +0200, Geert Uytterhoeven wrote:
> > > On Wed, May 31, 2023 at 1:14 PM Francesco Dolcini <francesco@dolcini.it> wrote:
> > > > From: Francesco Dolcini <francesco.dolcini@toradex.com>
> > > >
> > > > Add rs485-rts-active-high property, this was removed by mistake.
> > > > In general we just use rs485-rts-active-low property, however the OMAP
> > > > UART for legacy reason uses the -high one.
> > > >
> > > > Fixes: 767d3467eb60 ("dt-bindings: serial: 8250_omap: drop rs485 properties")
> > > > Closes: https://lore.kernel.org/all/ZGefR4mTHHo1iQ7H@francesco-nb.int.toradex.com/
> > > > Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
> > > > ---
> > > > v2: removed reported-by
> > >
> > > Thanks for your patch, which is now commit 403e97d6ab2cb6fd
> > > ("dt-bindings: serial: 8250_omap: add rs485-rts-active-high")
> > > in v6.4-rc5.
> > >
> > > > --- a/Documentation/devicetree/bindings/serial/8250_omap.yaml
> > > > +++ b/Documentation/devicetree/bindings/serial/8250_omap.yaml
> > > > @@ -70,6 +70,7 @@ properties:
> > > > dsr-gpios: true
> > > > rng-gpios: true
> > > > dcd-gpios: true
> > > > + rs485-rts-active-high: true
> > >
> > > make dt_binding_check complains:
> > >
> > > Documentation/devicetree/bindings/serial/8250_omap.yaml:
> > > rs485-rts-active-high: missing type definition
> >
> > For some reasons it works for me (and worked when I did send the patch)
> >
> > $ make dt_binding_check DT_SCHEMA_FILES=8250_omap.yaml
> > ...
> > HOSTCC scripts/dtc/libfdt/fdt_overlay.o
> > HOSTCC scripts/dtc/fdtoverlay.o
> > HOSTLD scripts/dtc/fdtoverlay
> > LINT Documentation/devicetree/bindings
> > invalid config: unknown option "required" for rule "quoted-strings"
> > xargs: /usr/bin/yamllint: exited with status 255; aborting
> > CHKDT Documentation/devicetree/bindings/processed-schema.json
> > SCHEMA Documentation/devicetree/bindings/processed-schema.json
> > /home/francesco/Toradex/sources/linux/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml: ignoring, error in schema: properties: qcom,ls-fs-output-impedance-bp
> > /home/francesco/Toradex/sources/linux/Documentation/devicetree/bindings/arm/vexpress-sysreg.yaml: ignoring, error in schema: properties: gpio-controller
> > /home/francesco/Toradex/sources/linux/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml: ignoring, error in schema: patternProperties: ^thermistor@: properties: adi,excitation-current-nanoamp
> > /home/francesco/Toradex/sources/linux/Documentation/devicetree/bindings/iio/adc/adi,ad4130.yaml: ignoring, error in schema: patternProperties: ^channel@([0-9a-f])$: properties: adi,burnout-current-nanoamp
> > /home/francesco/Toradex/sources/linux/Documentation/devicetree/bindings/iio/addac/adi,ad74115.yaml: ignoring, error in schema: properties: adi,ext2-burnout-current-nanoamp
> > DTEX Documentation/devicetree/bindings/serial/8250_omap.example.dts
> > DTC_CHK Documentation/devicetree/bindings/serial/8250_omap.example.dtb
> >
> >
> > any idea on what could be different between us?
>
> Are you using the latest dt-schema?
Nope, and I tried to update it and now everything fails in a miserable
way.
In any case the fix is clear and I am pretty confident the issue I had is
what you just wrote, I'll send a patch.
Francesco
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v2] dt-bindings: serial: 8250_omap: add rs485-rts-active-high
2023-10-19 15:37 ` Francesco Dolcini
@ 2023-10-19 19:34 ` Rob Herring
0 siblings, 0 replies; 7+ messages in thread
From: Rob Herring @ 2023-10-19 19:34 UTC (permalink / raw)
To: Francesco Dolcini
Cc: Geert Uytterhoeven, Greg Kroah-Hartman, Krzysztof Kozlowski,
Conor Dooley, Vignesh Raghavendra, linux-serial, devicetree,
Francesco Dolcini, linux-kernel
On Thu, Oct 19, 2023 at 10:37 AM Francesco Dolcini <francesco@dolcini.it> wrote:
>
> On Thu, Oct 19, 2023 at 05:13:01PM +0200, Geert Uytterhoeven wrote:
> > Hi Franceso,
> >
> > On Thu, Oct 19, 2023 at 5:05 PM Francesco Dolcini <francesco@dolcini.it> wrote:
> > > On Thu, Oct 19, 2023 at 12:09:06PM +0200, Geert Uytterhoeven wrote:
> > > > On Wed, May 31, 2023 at 1:14 PM Francesco Dolcini <francesco@dolcini.it> wrote:
> > > > > From: Francesco Dolcini <francesco.dolcini@toradex.com>
> > > > >
> > > > > Add rs485-rts-active-high property, this was removed by mistake.
> > > > > In general we just use rs485-rts-active-low property, however the OMAP
> > > > > UART for legacy reason uses the -high one.
> > > > >
> > > > > Fixes: 767d3467eb60 ("dt-bindings: serial: 8250_omap: drop rs485 properties")
> > > > > Closes: https://lore.kernel.org/all/ZGefR4mTHHo1iQ7H@francesco-nb.int.toradex.com/
> > > > > Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
> > > > > ---
> > > > > v2: removed reported-by
> > > >
> > > > Thanks for your patch, which is now commit 403e97d6ab2cb6fd
> > > > ("dt-bindings: serial: 8250_omap: add rs485-rts-active-high")
> > > > in v6.4-rc5.
> > > >
> > > > > --- a/Documentation/devicetree/bindings/serial/8250_omap.yaml
> > > > > +++ b/Documentation/devicetree/bindings/serial/8250_omap.yaml
> > > > > @@ -70,6 +70,7 @@ properties:
> > > > > dsr-gpios: true
> > > > > rng-gpios: true
> > > > > dcd-gpios: true
> > > > > + rs485-rts-active-high: true
> > > >
> > > > make dt_binding_check complains:
> > > >
> > > > Documentation/devicetree/bindings/serial/8250_omap.yaml:
> > > > rs485-rts-active-high: missing type definition
> > >
> > > For some reasons it works for me (and worked when I did send the patch)
> > >
> > > $ make dt_binding_check DT_SCHEMA_FILES=8250_omap.yaml
> > > ...
> > > HOSTCC scripts/dtc/libfdt/fdt_overlay.o
> > > HOSTCC scripts/dtc/fdtoverlay.o
> > > HOSTLD scripts/dtc/fdtoverlay
> > > LINT Documentation/devicetree/bindings
> > > invalid config: unknown option "required" for rule "quoted-strings"
> > > xargs: /usr/bin/yamllint: exited with status 255; aborting
> > > CHKDT Documentation/devicetree/bindings/processed-schema.json
> > > SCHEMA Documentation/devicetree/bindings/processed-schema.json
> > > /home/francesco/Toradex/sources/linux/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml: ignoring, error in schema: properties: qcom,ls-fs-output-impedance-bp
> > > /home/francesco/Toradex/sources/linux/Documentation/devicetree/bindings/arm/vexpress-sysreg.yaml: ignoring, error in schema: properties: gpio-controller
> > > /home/francesco/Toradex/sources/linux/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml: ignoring, error in schema: patternProperties: ^thermistor@: properties: adi,excitation-current-nanoamp
> > > /home/francesco/Toradex/sources/linux/Documentation/devicetree/bindings/iio/adc/adi,ad4130.yaml: ignoring, error in schema: patternProperties: ^channel@([0-9a-f])$: properties: adi,burnout-current-nanoamp
> > > /home/francesco/Toradex/sources/linux/Documentation/devicetree/bindings/iio/addac/adi,ad74115.yaml: ignoring, error in schema: properties: adi,ext2-burnout-current-nanoamp
> > > DTEX Documentation/devicetree/bindings/serial/8250_omap.example.dts
> > > DTC_CHK Documentation/devicetree/bindings/serial/8250_omap.example.dtb
> > >
> > >
> > > any idea on what could be different between us?
> >
> > Are you using the latest dt-schema?
Indeed, it is a new check.
> Nope, and I tried to update it and now everything fails in a miserable
> way.
Do you have more details?
Rob
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2023-10-19 19:34 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-05-31 11:10 [PATCH v2] dt-bindings: serial: 8250_omap: add rs485-rts-active-high Francesco Dolcini
2023-06-01 10:12 ` Krzysztof Kozlowski
2023-10-19 10:09 ` Geert Uytterhoeven
2023-10-19 15:05 ` Francesco Dolcini
2023-10-19 15:13 ` Geert Uytterhoeven
2023-10-19 15:37 ` Francesco Dolcini
2023-10-19 19:34 ` Rob Herring
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).