* [PATCH] ARM: dts: Add STM32429i-EVAL board support
@ 2015-07-12 9:39 Maxime Coquelin
2015-07-22 17:02 ` Maxime Coquelin
2015-07-22 23:42 ` Olof Johansson
0 siblings, 2 replies; 4+ messages in thread
From: Maxime Coquelin @ 2015-07-12 9:39 UTC (permalink / raw)
To: Arnd Bergmann, olof, khilman, linux-arm-kernel
Cc: devicetree, linux-kernel, Daniel Thompson, Kamil Lulko, afaerber
Main features of STM32429i-EVAL evaluation kit are:
- STM32F429 Cortex-M4 MCU @180MHz
* 2MB internal Flash
* 256KB internal RAM
- 32MB SDRAM
- 16MB NOR Flash
- 2MB SRAM
- 4.3" TFT LCD with resistive touchscreen
- SDCard connector (SDIO compatible)
- 1x USB 2.0 OTG + 1x USB 1.1 OTG
- Ethernet
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
---
arch/arm/boot/dts/Makefile | 4 +-
arch/arm/boot/dts/stm32429i-eval.dts | 75 ++++++++++++++++++++++++++++++++++++
2 files changed, 78 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/stm32429i-eval.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 246473a..6ff9508 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -544,7 +544,9 @@ dtb-$(CONFIG_ARCH_STI) += \
stih416-b2020.dtb \
stih416-b2020e.dtb \
stih418-b2199.dtb
-dtb-$(CONFIG_ARCH_STM32)+= stm32f429-disco.dtb
+dtb-$(CONFIG_ARCH_STM32)+= \
+ stm32f429-disco.dtb \
+ stm32429i-eval.dtb
dtb-$(CONFIG_MACH_SUN4I) += \
sun4i-a10-a1000.dtb \
sun4i-a10-ba10-tvbox.dtb \
diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
new file mode 100644
index 0000000..3436c60
--- /dev/null
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -0,0 +1,75 @@
+/*
+ * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "stm32f429.dtsi"
+
+/ {
+ model = "STMicroelectronics STM32429i-EVAL board";
+ compatible = "st,stm32429i-eval", "st,stm32f429";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 root=/dev/ram rdinit=/linuxrc";
+ linux,stdout-path = &usart1;
+ };
+
+ memory {
+ reg = <0xc0000000 0x2000000>;
+ };
+
+ aliases {
+ serial0 = &usart1;
+ };
+};
+
+&clk_hse {
+ clock-frequency = <25000000>;
+};
+
+&usart1 {
+ status = "okay";
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] ARM: dts: Add STM32429i-EVAL board support
2015-07-12 9:39 [PATCH] ARM: dts: Add STM32429i-EVAL board support Maxime Coquelin
@ 2015-07-22 17:02 ` Maxime Coquelin
2015-07-22 23:42 ` Olof Johansson
1 sibling, 0 replies; 4+ messages in thread
From: Maxime Coquelin @ 2015-07-22 17:02 UTC (permalink / raw)
To: Arnd Bergmann, olof, khilman, linux-arm-kernel
Cc: devicetree, linux-kernel, Daniel Thompson, Kamil Lulko, afaerber
On 07/12/2015 11:39 AM, Maxime Coquelin wrote:
> Main features of STM32429i-EVAL evaluation kit are:
> - STM32F429 Cortex-M4 MCU @180MHz
> * 2MB internal Flash
> * 256KB internal RAM
> - 32MB SDRAM
> - 16MB NOR Flash
> - 2MB SRAM
> - 4.3" TFT LCD with resistive touchscreen
> - SDCard connector (SDIO compatible)
> - 1x USB 2.0 OTG + 1x USB 1.1 OTG
> - Ethernet
>
> Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
> ---
> arch/arm/boot/dts/Makefile | 4 +-
> arch/arm/boot/dts/stm32429i-eval.dts | 75 ++++++++++++++++++++++++++++++++++++
> 2 files changed, 78 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/boot/dts/stm32429i-eval.dts
>
>
Applied to next/dt-for-v4.3.
Best regards,
Maxime
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] ARM: dts: Add STM32429i-EVAL board support
2015-07-12 9:39 [PATCH] ARM: dts: Add STM32429i-EVAL board support Maxime Coquelin
2015-07-22 17:02 ` Maxime Coquelin
@ 2015-07-22 23:42 ` Olof Johansson
2015-07-23 5:16 ` Maxime Coquelin
1 sibling, 1 reply; 4+ messages in thread
From: Olof Johansson @ 2015-07-22 23:42 UTC (permalink / raw)
To: Maxime Coquelin
Cc: Arnd Bergmann, Kevin Hilman, linux-arm-kernel, devicetree,
linux-kernel, Daniel Thompson, Kamil Lulko, Andreas Färber
Hi,
On Sun, Jul 12, 2015 at 2:39 AM, Maxime Coquelin
<mcoquelin.stm32@gmail.com> wrote:
> +/ {
> + model = "STMicroelectronics STM32429i-EVAL board";
> + compatible = "st,stm32429i-eval", "st,stm32f429";
> +
> + chosen {
> + bootargs = "console=ttyS0,115200 root=/dev/ram rdinit=/linuxrc";
> + linux,stdout-path = &usart1;
You should use stdout-path here instead, and with that you'll no
longer need the console arg in the bootargs.
See: https://www.kernel.org/doc/Documentation/devicetree/bindings/chosen.txt
-Olof
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] ARM: dts: Add STM32429i-EVAL board support
2015-07-22 23:42 ` Olof Johansson
@ 2015-07-23 5:16 ` Maxime Coquelin
0 siblings, 0 replies; 4+ messages in thread
From: Maxime Coquelin @ 2015-07-23 5:16 UTC (permalink / raw)
To: Olof Johansson
Cc: Arnd Bergmann, Kevin Hilman, linux-arm-kernel, devicetree,
linux-kernel, Daniel Thompson, Kamil Lulko, Andreas Färber
Hi Olof,
2015-07-23 1:42 GMT+02:00 Olof Johansson <olof@lixom.net>:
> Hi,
>
> On Sun, Jul 12, 2015 at 2:39 AM, Maxime Coquelin
> <mcoquelin.stm32@gmail.com> wrote:
>
>> +/ {
>> + model = "STMicroelectronics STM32429i-EVAL board";
>> + compatible = "st,stm32429i-eval", "st,stm32f429";
>> +
>> + chosen {
>> + bootargs = "console=ttyS0,115200 root=/dev/ram rdinit=/linuxrc";
>> + linux,stdout-path = &usart1;
>
> You should use stdout-path here instead, and with that you'll no
> longer need the console arg in the bootargs.
>
> See: https://www.kernel.org/doc/Documentation/devicetree/bindings/chosen.txt
Thanks for the hint! I was not aware of that.
I will send the new pull request fixing this, and also fixing
STM32F429 Discovery board shortly.
Thanks,
Maxime
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2015-07-23 5:16 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-07-12 9:39 [PATCH] ARM: dts: Add STM32429i-EVAL board support Maxime Coquelin
2015-07-22 17:02 ` Maxime Coquelin
2015-07-22 23:42 ` Olof Johansson
2015-07-23 5:16 ` Maxime Coquelin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).