* [PATCH v2] phy: rockchip-inno-usb2: Return zero after otg sync
@ 2022-08-23 14:47 Peter Geis
2022-08-23 18:48 ` Heiko Stübner
2022-08-24 5:33 ` Michael Riesch
0 siblings, 2 replies; 4+ messages in thread
From: Peter Geis @ 2022-08-23 14:47 UTC (permalink / raw)
To: Heiko Stuebner, Kishon Vijay Abraham I, Vinod Koul, Peter Geis,
Samuel Holland
Cc: Markus Reichl, Michael Riesch, linux-phy, linux-arm-kernel,
linux-rockchip, linux-kernel
The otg sync state patch reuses the ret variable, but fails to set it to
zero after use. This leads to a situation when the otg port is in
peripheral mode where the otg phy aborts halfway through setup. It also
fails to account for a failure to register the extcon notifier. Fix this
by using our own variable and skipping otg sync in case of failure.
Fixes: 8dc60f8da22f ("phy: rockchip-inno-usb2: Sync initial otg state")
Reported-by: Markus Reichl <m.reichl@fivetechno.de>
Reported-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Michael Riesch <michael.riesch@wolfvision.net>
Tested-by: Markus Reichl <m.reichl@fivetechno.de>
---
drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index 0b1e9337ee8e..d579a22c61df 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -1124,7 +1124,7 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
struct rockchip_usb2phy_port *rport,
struct device_node *child_np)
{
- int ret;
+ int ret, id;
rport->port_id = USB2PHY_PORT_OTG;
rport->port_cfg = &rphy->phy_cfg->port_cfgs[USB2PHY_PORT_OTG];
@@ -1164,11 +1164,12 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
EXTCON_USB_HOST, &rport->event_nb);
if (ret)
dev_err(rphy->dev, "register USB HOST notifier failed\n");
+ goto out;
if (!of_property_read_bool(rphy->dev->of_node, "extcon")) {
/* do initial sync of usb state */
- ret = property_enabled(rphy->grf, &rport->port_cfg->utmi_id);
- extcon_set_state_sync(rphy->edev, EXTCON_USB_HOST, !ret);
+ id = property_enabled(rphy->grf, &rport->port_cfg->utmi_id);
+ extcon_set_state_sync(rphy->edev, EXTCON_USB_HOST, !id);
}
}
--
2.25.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH v2] phy: rockchip-inno-usb2: Return zero after otg sync
2022-08-23 14:47 [PATCH v2] phy: rockchip-inno-usb2: Return zero after otg sync Peter Geis
@ 2022-08-23 18:48 ` Heiko Stübner
2022-08-24 5:33 ` Michael Riesch
1 sibling, 0 replies; 4+ messages in thread
From: Heiko Stübner @ 2022-08-23 18:48 UTC (permalink / raw)
To: Kishon Vijay Abraham I, Vinod Koul, Peter Geis, Samuel Holland,
Peter Geis
Cc: Markus Reichl, Michael Riesch, linux-phy, linux-arm-kernel,
linux-rockchip, linux-kernel
Am Dienstag, 23. August 2022, 16:47:28 CEST schrieb Peter Geis:
> The otg sync state patch reuses the ret variable, but fails to set it to
> zero after use. This leads to a situation when the otg port is in
> peripheral mode where the otg phy aborts halfway through setup. It also
> fails to account for a failure to register the extcon notifier. Fix this
> by using our own variable and skipping otg sync in case of failure.
>
> Fixes: 8dc60f8da22f ("phy: rockchip-inno-usb2: Sync initial otg state")
>
> Reported-by: Markus Reichl <m.reichl@fivetechno.de>
> Reported-by: Michael Riesch <michael.riesch@wolfvision.net>
> Signed-off-by: Peter Geis <pgwipeout@gmail.com>
> Tested-by: Michael Riesch <michael.riesch@wolfvision.net>
> Tested-by: Markus Reichl <m.reichl@fivetechno.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
> ---
> drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 7 ++++---
> 1 file changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> index 0b1e9337ee8e..d579a22c61df 100644
> --- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> +++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> @@ -1124,7 +1124,7 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
> struct rockchip_usb2phy_port *rport,
> struct device_node *child_np)
> {
> - int ret;
> + int ret, id;
>
> rport->port_id = USB2PHY_PORT_OTG;
> rport->port_cfg = &rphy->phy_cfg->port_cfgs[USB2PHY_PORT_OTG];
> @@ -1164,11 +1164,12 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
> EXTCON_USB_HOST, &rport->event_nb);
> if (ret)
> dev_err(rphy->dev, "register USB HOST notifier failed\n");
> + goto out;
>
> if (!of_property_read_bool(rphy->dev->of_node, "extcon")) {
> /* do initial sync of usb state */
> - ret = property_enabled(rphy->grf, &rport->port_cfg->utmi_id);
> - extcon_set_state_sync(rphy->edev, EXTCON_USB_HOST, !ret);
> + id = property_enabled(rphy->grf, &rport->port_cfg->utmi_id);
> + extcon_set_state_sync(rphy->edev, EXTCON_USB_HOST, !id);
> }
> }
>
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v2] phy: rockchip-inno-usb2: Return zero after otg sync
2022-08-23 14:47 [PATCH v2] phy: rockchip-inno-usb2: Return zero after otg sync Peter Geis
2022-08-23 18:48 ` Heiko Stübner
@ 2022-08-24 5:33 ` Michael Riesch
2022-08-24 10:17 ` Peter Geis
1 sibling, 1 reply; 4+ messages in thread
From: Michael Riesch @ 2022-08-24 5:33 UTC (permalink / raw)
To: Peter Geis, Heiko Stuebner, Kishon Vijay Abraham I, Vinod Koul,
Samuel Holland
Cc: Markus Reichl, linux-phy, linux-arm-kernel, linux-rockchip, linux-kernel
Hi Peter,
On 8/23/22 16:47, Peter Geis wrote:
> The otg sync state patch reuses the ret variable, but fails to set it to
> zero after use. This leads to a situation when the otg port is in
> peripheral mode where the otg phy aborts halfway through setup. It also
> fails to account for a failure to register the extcon notifier. Fix this
> by using our own variable and skipping otg sync in case of failure.
>
> Fixes: 8dc60f8da22f ("phy: rockchip-inno-usb2: Sync initial otg state")
>
> Reported-by: Markus Reichl <m.reichl@fivetechno.de>
> Reported-by: Michael Riesch <michael.riesch@wolfvision.net>
> Signed-off-by: Peter Geis <pgwipeout@gmail.com>
> Tested-by: Michael Riesch <michael.riesch@wolfvision.net>
> Tested-by: Markus Reichl <m.reichl@fivetechno.de>
> ---
> drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 7 ++++---
> 1 file changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> index 0b1e9337ee8e..d579a22c61df 100644
> --- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> +++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> @@ -1124,7 +1124,7 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
> struct rockchip_usb2phy_port *rport,
> struct device_node *child_np)
> {
> - int ret;
> + int ret, id;
>
> rport->port_id = USB2PHY_PORT_OTG;
> rport->port_cfg = &rphy->phy_cfg->port_cfgs[USB2PHY_PORT_OTG];
> @@ -1164,11 +1164,12 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
> EXTCON_USB_HOST, &rport->event_nb);
> if (ret)
This needs braces, right?
if (ret) {
> dev_err(rphy->dev, "register USB HOST notifier failed\n");
> + goto out;
}
With the braces the patch works as expected.
Thanks and best regards,
Michael
>
> if (!of_property_read_bool(rphy->dev->of_node, "extcon")) {
> /* do initial sync of usb state */
> - ret = property_enabled(rphy->grf, &rport->port_cfg->utmi_id);
> - extcon_set_state_sync(rphy->edev, EXTCON_USB_HOST, !ret);
> + id = property_enabled(rphy->grf, &rport->port_cfg->utmi_id);
> + extcon_set_state_sync(rphy->edev, EXTCON_USB_HOST, !id);
> }
> }
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v2] phy: rockchip-inno-usb2: Return zero after otg sync
2022-08-24 5:33 ` Michael Riesch
@ 2022-08-24 10:17 ` Peter Geis
0 siblings, 0 replies; 4+ messages in thread
From: Peter Geis @ 2022-08-24 10:17 UTC (permalink / raw)
To: Michael Riesch
Cc: Heiko Stuebner, Kishon Vijay Abraham I, Vinod Koul,
Samuel Holland, Markus Reichl, open list:GENERIC PHY FRAMEWORK,
arm-mail-list, open list:ARM/Rockchip SoC...,
Linux Kernel Mailing List
On Wed, Aug 24, 2022 at 7:33 AM Michael Riesch
<michael.riesch@wolfvision.net> wrote:
>
> Hi Peter,
>
> On 8/23/22 16:47, Peter Geis wrote:
> > The otg sync state patch reuses the ret variable, but fails to set it to
> > zero after use. This leads to a situation when the otg port is in
> > peripheral mode where the otg phy aborts halfway through setup. It also
> > fails to account for a failure to register the extcon notifier. Fix this
> > by using our own variable and skipping otg sync in case of failure.
> >
> > Fixes: 8dc60f8da22f ("phy: rockchip-inno-usb2: Sync initial otg state")
> >
> > Reported-by: Markus Reichl <m.reichl@fivetechno.de>
> > Reported-by: Michael Riesch <michael.riesch@wolfvision.net>
> > Signed-off-by: Peter Geis <pgwipeout@gmail.com>
> > Tested-by: Michael Riesch <michael.riesch@wolfvision.net>
> > Tested-by: Markus Reichl <m.reichl@fivetechno.de>
> > ---
> > drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 7 ++++---
> > 1 file changed, 4 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> > index 0b1e9337ee8e..d579a22c61df 100644
> > --- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> > +++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> > @@ -1124,7 +1124,7 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
> > struct rockchip_usb2phy_port *rport,
> > struct device_node *child_np)
> > {
> > - int ret;
> > + int ret, id;
> >
> > rport->port_id = USB2PHY_PORT_OTG;
> > rport->port_cfg = &rphy->phy_cfg->port_cfgs[USB2PHY_PORT_OTG];
> > @@ -1164,11 +1164,12 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
> > EXTCON_USB_HOST, &rport->event_nb);
> > if (ret)
>
> This needs braces, right?
>
> if (ret) {
> > dev_err(rphy->dev, "register USB HOST notifier failed\n");
> > + goto out;
>
> }
>
> With the braces the patch works as expected.
Yup, thanks for that. I hate working without access to my hardware.
>
> Thanks and best regards,
> Michael
>
> >
> > if (!of_property_read_bool(rphy->dev->of_node, "extcon")) {
> > /* do initial sync of usb state */
> > - ret = property_enabled(rphy->grf, &rport->port_cfg->utmi_id);
> > - extcon_set_state_sync(rphy->edev, EXTCON_USB_HOST, !ret);
> > + id = property_enabled(rphy->grf, &rport->port_cfg->utmi_id);
> > + extcon_set_state_sync(rphy->edev, EXTCON_USB_HOST, !id);
> > }
> > }
> >
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2022-08-24 10:17 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-08-23 14:47 [PATCH v2] phy: rockchip-inno-usb2: Return zero after otg sync Peter Geis
2022-08-23 18:48 ` Heiko Stübner
2022-08-24 5:33 ` Michael Riesch
2022-08-24 10:17 ` Peter Geis
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).