* [PATCH v2 1/4] arm64: dts: renesas: aistarvision-mipi-adapter-2.1: Add parent macro for each sensor
2020-10-20 12:51 [PATCH v2 0/4] HiHope RZ/G2x add MIPI Adapter board support Lad Prabhakar
@ 2020-10-20 12:51 ` Lad Prabhakar
2020-10-23 7:48 ` Geert Uytterhoeven
2020-10-20 12:51 ` [PATCH v2 2/4] arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2H Lad Prabhakar
` (2 subsequent siblings)
3 siblings, 1 reply; 11+ messages in thread
From: Lad Prabhakar @ 2020-10-20 12:51 UTC (permalink / raw)
To: Geert Uytterhoeven, Magnus Damm, Rob Herring, linux-renesas-soc,
devicetree
Cc: linux-kernel, Prabhakar, Lad Prabhakar, Biju Das
For HiHope RZ/G2H the OV5645 sensor is populated on i2c2 whereas the imx219
sensor is populated on i2c3 so add support for handling such cases by
adding a parent macro for each sensor.
Also update r8a774c0-ek874-mipi-2.1.dts to incorporate the changes.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
---
v1->v2 - No change
---
.../arm64/boot/dts/renesas/aistarvision-mipi-adapter-2.1.dtsi | 4 +++-
arch/arm64/boot/dts/renesas/r8a774c0-ek874-mipi-2.1.dts | 3 ++-
2 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/aistarvision-mipi-adapter-2.1.dtsi b/arch/arm64/boot/dts/renesas/aistarvision-mipi-adapter-2.1.dtsi
index dac6ff49020f..7ce986f0a06f 100644
--- a/arch/arm64/boot/dts/renesas/aistarvision-mipi-adapter-2.1.dtsi
+++ b/arch/arm64/boot/dts/renesas/aistarvision-mipi-adapter-2.1.dtsi
@@ -61,7 +61,7 @@
};
};
-&MIPI_PARENT_I2C {
+&MIPI_OV5645_PARENT_I2C {
ov5645: ov5645@3c {
compatible = "ovti,ov5645";
reg = <0x3c>;
@@ -77,7 +77,9 @@
};
};
};
+};
+&MIPI_IMX219_PARENT_I2C {
imx219: imx219@10 {
compatible = "sony,imx219";
reg = <0x10>;
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-ek874-mipi-2.1.dts b/arch/arm64/boot/dts/renesas/r8a774c0-ek874-mipi-2.1.dts
index f0829e905506..e7b4a929bb17 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0-ek874-mipi-2.1.dts
+++ b/arch/arm64/boot/dts/renesas/r8a774c0-ek874-mipi-2.1.dts
@@ -8,7 +8,8 @@
/dts-v1/;
#include "r8a774c0-ek874.dts"
-#define MIPI_PARENT_I2C i2c3
+#define MIPI_OV5645_PARENT_I2C i2c3
+#define MIPI_IMX219_PARENT_I2C i2c3
#include "aistarvision-mipi-adapter-2.1.dtsi"
/ {
--
2.17.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* Re: [PATCH v2 1/4] arm64: dts: renesas: aistarvision-mipi-adapter-2.1: Add parent macro for each sensor
2020-10-20 12:51 ` [PATCH v2 1/4] arm64: dts: renesas: aistarvision-mipi-adapter-2.1: Add parent macro for each sensor Lad Prabhakar
@ 2020-10-23 7:48 ` Geert Uytterhoeven
0 siblings, 0 replies; 11+ messages in thread
From: Geert Uytterhoeven @ 2020-10-23 7:48 UTC (permalink / raw)
To: Lad Prabhakar
Cc: Magnus Damm, Rob Herring, Linux-Renesas,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
Linux Kernel Mailing List, Prabhakar, Biju Das
On Tue, Oct 20, 2020 at 2:52 PM Lad Prabhakar
<prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
> For HiHope RZ/G2H the OV5645 sensor is populated on i2c2 whereas the imx219
> sensor is populated on i2c3 so add support for handling such cases by
> adding a parent macro for each sensor.
>
> Also update r8a774c0-ek874-mipi-2.1.dts to incorporate the changes.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-devel for v5.11.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v2 2/4] arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2H
2020-10-20 12:51 [PATCH v2 0/4] HiHope RZ/G2x add MIPI Adapter board support Lad Prabhakar
2020-10-20 12:51 ` [PATCH v2 1/4] arm64: dts: renesas: aistarvision-mipi-adapter-2.1: Add parent macro for each sensor Lad Prabhakar
@ 2020-10-20 12:51 ` Lad Prabhakar
2020-10-23 7:49 ` Geert Uytterhoeven
2020-10-23 9:05 ` Niklas Söderlund
2020-10-20 12:51 ` [PATCH v2 3/4] arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2M Lad Prabhakar
2020-10-20 12:51 ` [PATCH v2 4/4] arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2N Lad Prabhakar
3 siblings, 2 replies; 11+ messages in thread
From: Lad Prabhakar @ 2020-10-20 12:51 UTC (permalink / raw)
To: Geert Uytterhoeven, Magnus Damm, Rob Herring, linux-renesas-soc,
devicetree
Cc: linux-kernel, Prabhakar, Lad Prabhakar, Biju Das
Add support for AISTARVISION MIPI Adapter V2.1 board connected to HiHope
RZ/G2H board.
Common file hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi is created
which will be used by RZ/G2{HMN}, by default the CSI20 node is tied to
ov5645 camera endpoint and the imx219 camera endpoint is tied to CSI40.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
---
v1->v2 - No change
---
arch/arm64/boot/dts/renesas/Makefile | 1 +
...rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi | 109 ++++++++++++++++++
.../r8a774e1-hihope-rzg2h-ex-mipi-2.1.dts | 16 +++
3 files changed, 126 insertions(+)
create mode 100644 arch/arm64/boot/dts/renesas/hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi
create mode 100644 arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex-mipi-2.1.dts
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index dffefe030a76..f98e9e2e520d 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -22,6 +22,7 @@ dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-ek874-mipi-2.1.dtb
dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h.dtb
dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h-ex.dtb
dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h-ex-idk-1110wr.dtb
+dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h-ex-mipi-2.1.dtb
dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-salvator-x.dtb
dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-ulcb.dtb
diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi
new file mode 100644
index 000000000000..c62ddb9b2ba5
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2[HMN] MIPI common parts
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#define MIPI_OV5645_PARENT_I2C i2c2
+#define MIPI_IMX219_PARENT_I2C i2c3
+#include "aistarvision-mipi-adapter-2.1.dtsi"
+
+&csi20 {
+ status = "okay";
+
+ ports {
+ port@0 {
+ reg = <0>;
+ csi20_in: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ remote-endpoint = <&ov5645_ep>;
+ };
+ };
+ };
+};
+
+&csi40 {
+ status = "okay";
+
+ ports {
+ port@0 {
+ reg = <0>;
+ csi40_in: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ remote-endpoint = <&imx219_ep>;
+ };
+ };
+ };
+};
+
+&i2c3 {
+ pinctrl-0 = <&i2c3_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&imx219 {
+ port {
+ imx219_ep: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ link-frequencies = /bits/ 64 <456000000>;
+ remote-endpoint = <&csi40_in>;
+ };
+ };
+};
+
+&ov5645 {
+ enable-gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio6 8 GPIO_ACTIVE_LOW>;
+
+ port {
+ ov5645_ep: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ remote-endpoint = <&csi20_in>;
+ };
+ };
+};
+
+&pfc {
+ i2c3_pins: i2c3 {
+ groups = "i2c3";
+ function = "i2c3";
+ };
+};
+
+&vin0 {
+ status = "okay";
+};
+
+&vin1 {
+ status = "okay";
+};
+
+&vin2 {
+ status = "okay";
+};
+
+&vin3 {
+ status = "okay";
+};
+
+&vin4 {
+ status = "okay";
+};
+
+&vin5 {
+ status = "okay";
+};
+
+&vin6 {
+ status = "okay";
+};
+
+&vin7 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex-mipi-2.1.dts b/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex-mipi-2.1.dts
new file mode 100644
index 000000000000..46adb6efb5e6
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex-mipi-2.1.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2H board
+ * connected with aistarvision-mipi-v2-adapter board
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a774e1-hihope-rzg2h-ex.dts"
+#include "hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi"
+
+/ {
+ model = "HopeRun HiHope RZ/G2H with sub board connected with aistarvision-mipi-v2-adapter board";
+ compatible = "hoperun,hihope-rzg2h", "renesas,r8a774e1";
+};
--
2.17.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* Re: [PATCH v2 2/4] arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2H
2020-10-20 12:51 ` [PATCH v2 2/4] arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2H Lad Prabhakar
@ 2020-10-23 7:49 ` Geert Uytterhoeven
2020-10-23 9:05 ` Niklas Söderlund
1 sibling, 0 replies; 11+ messages in thread
From: Geert Uytterhoeven @ 2020-10-23 7:49 UTC (permalink / raw)
To: Lad Prabhakar
Cc: Magnus Damm, Rob Herring, Linux-Renesas,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
Linux Kernel Mailing List, Prabhakar, Biju Das,
Niklas Söderlund
Hi Prabhakar,
On Tue, Oct 20, 2020 at 2:52 PM Lad Prabhakar
<prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
> Add support for AISTARVISION MIPI Adapter V2.1 board connected to HiHope
> RZ/G2H board.
>
> Common file hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi is created
> which will be used by RZ/G2{HMN}, by default the CSI20 node is tied to
> ov5645 camera endpoint and the imx219 camera endpoint is tied to CSI40.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Looks good to me, so:
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-devel for v5.11.
Review from an R-Car CSI/VIN expert wouldn't hurt, though...
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [PATCH v2 2/4] arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2H
2020-10-20 12:51 ` [PATCH v2 2/4] arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2H Lad Prabhakar
2020-10-23 7:49 ` Geert Uytterhoeven
@ 2020-10-23 9:05 ` Niklas Söderlund
1 sibling, 0 replies; 11+ messages in thread
From: Niklas Söderlund @ 2020-10-23 9:05 UTC (permalink / raw)
To: Lad Prabhakar
Cc: Geert Uytterhoeven, Magnus Damm, Rob Herring, linux-renesas-soc,
devicetree, linux-kernel, Prabhakar, Biju Das
Hi Lad,
Thanks for your work.
On 2020-10-20 13:51:32 +0100, Lad Prabhakar wrote:
> Add support for AISTARVISION MIPI Adapter V2.1 board connected to HiHope
> RZ/G2H board.
>
> Common file hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi is created
> which will be used by RZ/G2{HMN}, by default the CSI20 node is tied to
> ov5645 camera endpoint and the imx219 camera endpoint is tied to CSI40.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
I have not reviewed the schematics but the patch in itself looks good,
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> ---
> v1->v2 - No change
> ---
> arch/arm64/boot/dts/renesas/Makefile | 1 +
> ...rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi | 109 ++++++++++++++++++
> .../r8a774e1-hihope-rzg2h-ex-mipi-2.1.dts | 16 +++
> 3 files changed, 126 insertions(+)
> create mode 100644 arch/arm64/boot/dts/renesas/hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi
> create mode 100644 arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex-mipi-2.1.dts
>
> diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
> index dffefe030a76..f98e9e2e520d 100644
> --- a/arch/arm64/boot/dts/renesas/Makefile
> +++ b/arch/arm64/boot/dts/renesas/Makefile
> @@ -22,6 +22,7 @@ dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-ek874-mipi-2.1.dtb
> dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h.dtb
> dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h-ex.dtb
> dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h-ex-idk-1110wr.dtb
> +dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h-ex-mipi-2.1.dtb
>
> dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-salvator-x.dtb
> dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-ulcb.dtb
> diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi
> new file mode 100644
> index 000000000000..c62ddb9b2ba5
> --- /dev/null
> +++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi
> @@ -0,0 +1,109 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Device Tree Source for the HiHope RZ/G2[HMN] MIPI common parts
> + *
> + * Copyright (C) 2020 Renesas Electronics Corp.
> + */
> +
> +#define MIPI_OV5645_PARENT_I2C i2c2
> +#define MIPI_IMX219_PARENT_I2C i2c3
> +#include "aistarvision-mipi-adapter-2.1.dtsi"
> +
> +&csi20 {
> + status = "okay";
> +
> + ports {
> + port@0 {
> + reg = <0>;
> + csi20_in: endpoint {
> + clock-lanes = <0>;
> + data-lanes = <1 2>;
> + remote-endpoint = <&ov5645_ep>;
> + };
> + };
> + };
> +};
> +
> +&csi40 {
> + status = "okay";
> +
> + ports {
> + port@0 {
> + reg = <0>;
> + csi40_in: endpoint {
> + clock-lanes = <0>;
> + data-lanes = <1 2>;
> + remote-endpoint = <&imx219_ep>;
> + };
> + };
> + };
> +};
> +
> +&i2c3 {
> + pinctrl-0 = <&i2c3_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> +
> +&imx219 {
> + port {
> + imx219_ep: endpoint {
> + clock-lanes = <0>;
> + data-lanes = <1 2>;
> + link-frequencies = /bits/ 64 <456000000>;
> + remote-endpoint = <&csi40_in>;
> + };
> + };
> +};
> +
> +&ov5645 {
> + enable-gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>;
> + reset-gpios = <&gpio6 8 GPIO_ACTIVE_LOW>;
> +
> + port {
> + ov5645_ep: endpoint {
> + clock-lanes = <0>;
> + data-lanes = <1 2>;
> + remote-endpoint = <&csi20_in>;
> + };
> + };
> +};
> +
> +&pfc {
> + i2c3_pins: i2c3 {
> + groups = "i2c3";
> + function = "i2c3";
> + };
> +};
> +
> +&vin0 {
> + status = "okay";
> +};
> +
> +&vin1 {
> + status = "okay";
> +};
> +
> +&vin2 {
> + status = "okay";
> +};
> +
> +&vin3 {
> + status = "okay";
> +};
> +
> +&vin4 {
> + status = "okay";
> +};
> +
> +&vin5 {
> + status = "okay";
> +};
> +
> +&vin6 {
> + status = "okay";
> +};
> +
> +&vin7 {
> + status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex-mipi-2.1.dts b/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex-mipi-2.1.dts
> new file mode 100644
> index 000000000000..46adb6efb5e6
> --- /dev/null
> +++ b/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex-mipi-2.1.dts
> @@ -0,0 +1,16 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Device Tree Source for the HiHope RZ/G2H board
> + * connected with aistarvision-mipi-v2-adapter board
> + *
> + * Copyright (C) 2020 Renesas Electronics Corp.
> + */
> +
> +/dts-v1/;
> +#include "r8a774e1-hihope-rzg2h-ex.dts"
> +#include "hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi"
> +
> +/ {
> + model = "HopeRun HiHope RZ/G2H with sub board connected with aistarvision-mipi-v2-adapter board";
> + compatible = "hoperun,hihope-rzg2h", "renesas,r8a774e1";
> +};
> --
> 2.17.1
>
--
Regards,
Niklas Söderlund
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v2 3/4] arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2M
2020-10-20 12:51 [PATCH v2 0/4] HiHope RZ/G2x add MIPI Adapter board support Lad Prabhakar
2020-10-20 12:51 ` [PATCH v2 1/4] arm64: dts: renesas: aistarvision-mipi-adapter-2.1: Add parent macro for each sensor Lad Prabhakar
2020-10-20 12:51 ` [PATCH v2 2/4] arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2H Lad Prabhakar
@ 2020-10-20 12:51 ` Lad Prabhakar
2020-10-23 7:50 ` Geert Uytterhoeven
2020-10-20 12:51 ` [PATCH v2 4/4] arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2N Lad Prabhakar
3 siblings, 1 reply; 11+ messages in thread
From: Lad Prabhakar @ 2020-10-20 12:51 UTC (permalink / raw)
To: Geert Uytterhoeven, Magnus Damm, Rob Herring, linux-renesas-soc,
devicetree
Cc: linux-kernel, Prabhakar, Lad Prabhakar, Biju Das
Add support for AISTARVISION MIPI Adapter V2.1 board connected to HiHope
RZ/G2M board.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
---
v1->v2
* Disabled CSI40 amd imx219 nodes
* Added a comment wrt CSI40 as it supports only 4 lane mode
---
arch/arm64/boot/dts/renesas/Makefile | 1 +
.../r8a774a1-hihope-rzg2m-ex-mipi-2.1.dts | 29 +++++++++++++++++++
2 files changed, 30 insertions(+)
create mode 100644 arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-mipi-2.1.dts
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index f98e9e2e520d..6581d19a3217 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex-idk-1110wr.dtb
dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2.dtb
dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2-ex.dtb
dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dtb
+dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex-mipi-2.1.dtb
dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n.dtb
dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-mipi-2.1.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-mipi-2.1.dts
new file mode 100644
index 000000000000..5c91e0d7e67b
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-mipi-2.1.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2M board
+ * connected with aistarvision-mipi-v2-adapter board
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a774a1-hihope-rzg2m-ex.dts"
+#include "hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi"
+
+/ {
+ model = "HopeRun HiHope RZ/G2M with sub board connected with aistarvision-mipi-v2-adapter board";
+ compatible = "hoperun,hihope-rzg2m", "renesas,r8a774a1";
+};
+
+/*
+ * On RZ/G2M SoC LSI V1.3 CSI40 supports only 4 lane mode.
+ * HiHope RZ/G2M Rev.4.0 board is based on LSI V1.3 so disable csi40 and
+ * imx219 as the imx219 endpoint driver supports only 2 lane mode.
+ */
+&csi40 {
+ status = "disabled";
+};
+
+&imx219 {
+ status = "disabled";
+};
--
2.17.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* Re: [PATCH v2 3/4] arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2M
2020-10-20 12:51 ` [PATCH v2 3/4] arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2M Lad Prabhakar
@ 2020-10-23 7:50 ` Geert Uytterhoeven
2020-10-23 7:58 ` Prabhakar Mahadev Lad
0 siblings, 1 reply; 11+ messages in thread
From: Geert Uytterhoeven @ 2020-10-23 7:50 UTC (permalink / raw)
To: Lad Prabhakar
Cc: Geert Uytterhoeven, Magnus Damm, Rob Herring, Linux-Renesas,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
Linux Kernel Mailing List, Prabhakar, Biju Das
Hi Prabhakar,
On Tue, Oct 20, 2020 at 2:52 PM Lad Prabhakar
<prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
> Add support for AISTARVISION MIPI Adapter V2.1 board connected to HiHope
> RZ/G2M board.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Thanks for your patch!
> --- a/arch/arm64/boot/dts/renesas/Makefile
> +++ b/arch/arm64/boot/dts/renesas/Makefile
> @@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex-idk-1110wr.dtb
> dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2.dtb
> dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2-ex.dtb
> dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dtb
> +dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex-mipi-2.1.dtb
I'll fix sort order while applying...
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-devel for v5.11.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 11+ messages in thread* RE: [PATCH v2 3/4] arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2M
2020-10-23 7:50 ` Geert Uytterhoeven
@ 2020-10-23 7:58 ` Prabhakar Mahadev Lad
0 siblings, 0 replies; 11+ messages in thread
From: Prabhakar Mahadev Lad @ 2020-10-23 7:58 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Geert Uytterhoeven, Magnus Damm, Rob Herring, Linux-Renesas,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
Linux Kernel Mailing List, Prabhakar, Biju Das
Hi Geert,
Thank you for the review.
> -----Original Message-----
> From: Geert Uytterhoeven <geert@linux-m68k.org>
> Sent: 23 October 2020 08:50
> To: Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Cc: Geert Uytterhoeven <geert+renesas@glider.be>; Magnus Damm <magnus.damm@gmail.com>; Rob Herring <robh+dt@kernel.org>;
> Linux-Renesas <linux-renesas-soc@vger.kernel.org>; open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS
> <devicetree@vger.kernel.org>; Linux Kernel Mailing List <linux-kernel@vger.kernel.org>; Prabhakar <prabhakar.csengg@gmail.com>; Biju
> Das <biju.das.jz@bp.renesas.com>
> Subject: Re: [PATCH v2 3/4] arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2M
>
> Hi Prabhakar,
>
> On Tue, Oct 20, 2020 at 2:52 PM Lad Prabhakar
> <prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
> > Add support for AISTARVISION MIPI Adapter V2.1 board connected to HiHope
> > RZ/G2M board.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
>
> Thanks for your patch!
>
> > --- a/arch/arm64/boot/dts/renesas/Makefile
> > +++ b/arch/arm64/boot/dts/renesas/Makefile
> > @@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex-idk-1110wr.dtb
> > dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2.dtb
> > dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2-ex.dtb
> > dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dtb
> > +dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex-mipi-2.1.dtb
>
> I'll fix sort order while applying...
>
Oops I missed that, thank you for taking care of it.
Cheers,
Prabhakar
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> i.e. will queue in renesas-devel for v5.11.
>
> Gr{oetje,eeting}s,
>
> Geert
>
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> -- Linus Torvalds
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v2 4/4] arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2N
2020-10-20 12:51 [PATCH v2 0/4] HiHope RZ/G2x add MIPI Adapter board support Lad Prabhakar
` (2 preceding siblings ...)
2020-10-20 12:51 ` [PATCH v2 3/4] arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2M Lad Prabhakar
@ 2020-10-20 12:51 ` Lad Prabhakar
2020-10-23 7:50 ` Geert Uytterhoeven
3 siblings, 1 reply; 11+ messages in thread
From: Lad Prabhakar @ 2020-10-20 12:51 UTC (permalink / raw)
To: Geert Uytterhoeven, Magnus Damm, Rob Herring, linux-renesas-soc,
devicetree
Cc: linux-kernel, Prabhakar, Lad Prabhakar, Biju Das
Add support for AISTARVISION MIPI Adapter V2.1 board connected to HiHope
RZ/G2N board.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
---
v1->v2 - No change
---
arch/arm64/boot/dts/renesas/Makefile | 1 +
.../r8a774b1-hihope-rzg2n-ex-mipi-2.1.dts | 16 ++++++++++++++++
2 files changed, 17 insertions(+)
create mode 100644 arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex-mipi-2.1.dts
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 6581d19a3217..5f163af16180 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -14,6 +14,7 @@ dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex-idk-1110wr.dtb
dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-rev2.dtb
dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-rev2-ex.dtb
dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-rev2-ex-idk-1110wr.dtb
+dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex-mipi-2.1.dtb
dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-cat874.dtb
dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-ek874.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex-mipi-2.1.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex-mipi-2.1.dts
new file mode 100644
index 000000000000..ce8e3bcc7dc9
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex-mipi-2.1.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2N board
+ * connected with aistarvision-mipi-v2-adapter board
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a774b1-hihope-rzg2n-ex.dts"
+#include "hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi"
+
+/ {
+ model = "HopeRun HiHope RZ/G2N with sub board connected with aistarvision-mipi-v2-adapter board";
+ compatible = "hoperun,hihope-rzg2n", "renesas,r8a774b1";
+};
--
2.17.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* Re: [PATCH v2 4/4] arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2N
2020-10-20 12:51 ` [PATCH v2 4/4] arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2N Lad Prabhakar
@ 2020-10-23 7:50 ` Geert Uytterhoeven
0 siblings, 0 replies; 11+ messages in thread
From: Geert Uytterhoeven @ 2020-10-23 7:50 UTC (permalink / raw)
To: Lad Prabhakar
Cc: Geert Uytterhoeven, Magnus Damm, Rob Herring, Linux-Renesas,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
Linux Kernel Mailing List, Prabhakar, Biju Das
Hi Prabhakar,
On Tue, Oct 20, 2020 at 2:52 PM Lad Prabhakar
<prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
> Add support for AISTARVISION MIPI Adapter V2.1 board connected to HiHope
> RZ/G2N board.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Thanks for your patch!
> --- a/arch/arm64/boot/dts/renesas/Makefile
> +++ b/arch/arm64/boot/dts/renesas/Makefile
> @@ -14,6 +14,7 @@ dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex-idk-1110wr.dtb
> dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-rev2.dtb
> dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-rev2-ex.dtb
> dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-rev2-ex-idk-1110wr.dtb
> +dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex-mipi-2.1.dtb
I'll fix sort order while applying...
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-devel for v5.11.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 11+ messages in thread