* [PATCH] m68k: Kconfig.machine: remove obsolete configs ROMBASE and ROMSIZE
@ 2023-03-20 13:54 Lukas Bulwahn
2023-03-20 14:30 ` Geert Uytterhoeven
2023-03-21 0:09 ` Greg Ungerer
0 siblings, 2 replies; 3+ messages in thread
From: Lukas Bulwahn @ 2023-03-20 13:54 UTC (permalink / raw)
To: Geert Uytterhoeven, linux-m68k
Cc: kernel-janitors, linux-kernel, Lukas Bulwahn
The configs ROMBASE and ROMSIZE were used in arch/m68k/68360/head-ram.S,
which was removed with commit a3595962d824 ("m68knommu: remove obsolete
68360 support").
Remove the obsolete configs ROMBASE and ROMSIZE.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
---
arch/m68k/Kconfig.machine | 17 -----------------
1 file changed, 17 deletions(-)
diff --git a/arch/m68k/Kconfig.machine b/arch/m68k/Kconfig.machine
index e2f961208f18..255d50574065 100644
--- a/arch/m68k/Kconfig.machine
+++ b/arch/m68k/Kconfig.machine
@@ -439,15 +439,6 @@ config ROM
that can be stored in flash, with possibly the text, and data
regions being copied out to RAM at startup.
-config ROMBASE
- hex "Address of the base of ROM device"
- default "0"
- depends on ROM
- help
- Define the address that the ROM region starts at. Some platforms
- use this to set their chip select region accordingly for the boot
- device.
-
config ROMVEC
hex "Address of the base of the ROM vectors"
default "0"
@@ -465,14 +456,6 @@ config ROMSTART
Define the start address of the system image in ROM. Commonly this
is strait after the ROM vectors.
-config ROMSIZE
- hex "Size of the ROM device"
- default "0x100000"
- depends on ROM
- help
- Size of the ROM device. On some platforms this is used to setup
- the chip select that controls the boot ROM device.
-
choice
prompt "Kernel executes from"
help
--
2.17.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] m68k: Kconfig.machine: remove obsolete configs ROMBASE and ROMSIZE
2023-03-20 13:54 [PATCH] m68k: Kconfig.machine: remove obsolete configs ROMBASE and ROMSIZE Lukas Bulwahn
@ 2023-03-20 14:30 ` Geert Uytterhoeven
2023-03-21 0:09 ` Greg Ungerer
1 sibling, 0 replies; 3+ messages in thread
From: Geert Uytterhoeven @ 2023-03-20 14:30 UTC (permalink / raw)
To: Lukas Bulwahn; +Cc: linux-m68k, kernel-janitors, linux-kernel, Greg Ungerer
CC Greg
On Mon, Mar 20, 2023 at 2:54 PM Lukas Bulwahn <lukas.bulwahn@gmail.com> wrote:
> The configs ROMBASE and ROMSIZE were used in arch/m68k/68360/head-ram.S,
> which was removed with commit a3595962d824 ("m68knommu: remove obsolete
> 68360 support").
>
> Remove the obsolete configs ROMBASE and ROMSIZE.
>
> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Fixes: a3595962d82495f5 ("m68knommu: remove obsolete 68360 support")
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
> --- a/arch/m68k/Kconfig.machine
> +++ b/arch/m68k/Kconfig.machine
> @@ -439,15 +439,6 @@ config ROM
> that can be stored in flash, with possibly the text, and data
> regions being copied out to RAM at startup.
>
> -config ROMBASE
> - hex "Address of the base of ROM device"
> - default "0"
> - depends on ROM
> - help
> - Define the address that the ROM region starts at. Some platforms
> - use this to set their chip select region accordingly for the boot
> - device.
> -
> config ROMVEC
> hex "Address of the base of the ROM vectors"
> default "0"
> @@ -465,14 +456,6 @@ config ROMSTART
> Define the start address of the system image in ROM. Commonly this
> is strait after the ROM vectors.
>
> -config ROMSIZE
> - hex "Size of the ROM device"
> - default "0x100000"
> - depends on ROM
> - help
> - Size of the ROM device. On some platforms this is used to setup
> - the chip select that controls the boot ROM device.
> -
> choice
> prompt "Kernel executes from"
> help
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] m68k: Kconfig.machine: remove obsolete configs ROMBASE and ROMSIZE
2023-03-20 13:54 [PATCH] m68k: Kconfig.machine: remove obsolete configs ROMBASE and ROMSIZE Lukas Bulwahn
2023-03-20 14:30 ` Geert Uytterhoeven
@ 2023-03-21 0:09 ` Greg Ungerer
1 sibling, 0 replies; 3+ messages in thread
From: Greg Ungerer @ 2023-03-21 0:09 UTC (permalink / raw)
To: Lukas Bulwahn, Geert Uytterhoeven, linux-m68k
Cc: kernel-janitors, linux-kernel
Hi Lukas,
On 20/3/23 23:54, Lukas Bulwahn wrote:
> The configs ROMBASE and ROMSIZE were used in arch/m68k/68360/head-ram.S,
> which was removed with commit a3595962d824 ("m68knommu: remove obsolete
> 68360 support").
>
> Remove the obsolete configs ROMBASE and ROMSIZE.
>
> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Looks good thanks.
I have pushed this into the m68knommu git tree, for next branch,
after adding Geerts Fixes and Reviewed-by tags.
Regards
Greg
> ---
> arch/m68k/Kconfig.machine | 17 -----------------
> 1 file changed, 17 deletions(-)
>
> diff --git a/arch/m68k/Kconfig.machine b/arch/m68k/Kconfig.machine
> index e2f961208f18..255d50574065 100644
> --- a/arch/m68k/Kconfig.machine
> +++ b/arch/m68k/Kconfig.machine
> @@ -439,15 +439,6 @@ config ROM
> that can be stored in flash, with possibly the text, and data
> regions being copied out to RAM at startup.
>
> -config ROMBASE
> - hex "Address of the base of ROM device"
> - default "0"
> - depends on ROM
> - help
> - Define the address that the ROM region starts at. Some platforms
> - use this to set their chip select region accordingly for the boot
> - device.
> -
> config ROMVEC
> hex "Address of the base of the ROM vectors"
> default "0"
> @@ -465,14 +456,6 @@ config ROMSTART
> Define the start address of the system image in ROM. Commonly this
> is strait after the ROM vectors.
>
> -config ROMSIZE
> - hex "Size of the ROM device"
> - default "0x100000"
> - depends on ROM
> - help
> - Size of the ROM device. On some platforms this is used to setup
> - the chip select that controls the boot ROM device.
> -
> choice
> prompt "Kernel executes from"
> help
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2023-03-21 0:10 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-03-20 13:54 [PATCH] m68k: Kconfig.machine: remove obsolete configs ROMBASE and ROMSIZE Lukas Bulwahn
2023-03-20 14:30 ` Geert Uytterhoeven
2023-03-21 0:09 ` Greg Ungerer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).