linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Nicolas Boichat <drinkcat@chromium.org>
To: Weiyi Lu <weiyi.lu@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>,
	Rob Herring <robh@kernel.org>,
	James Liao <jamesjj.liao@mediatek.com>,
	Fan Chen <fan.chen@mediatek.com>,
	linux-arm Mailing List <linux-arm-kernel@lists.infradead.org>,
	lkml <linux-kernel@vger.kernel.org>,
	"moderated list:ARM/Mediatek SoC support" 
	<linux-mediatek@lists.infradead.org>,
	srv_heupstream <srv_heupstream@mediatek.com>
Subject: Re: [PATCH v5 10/14] soc: mediatek: Add multiple step bus protection control
Date: Thu, 21 Mar 2019 13:57:53 +0800	[thread overview]
Message-ID: <CANMq1KAU4o1ad+CM09QtPTGey+mzheg3bR4+iDXpcW+znRC9fQ@mail.gmail.com> (raw)
In-Reply-To: <20190319080140.24055-11-weiyi.lu@mediatek.com>

On Tue, Mar 19, 2019 at 4:02 PM Weiyi Lu <weiyi.lu@mediatek.com> wrote:
>
> Both MT8183 & MT6765 have more control steps of bus protection
> than previous project. And there add more bus protection registers
> reside at infracfg & smi-common. Also add new APIs for multiple
> step bus protection control with more customize arguments.
>
> Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
> ---
>  drivers/soc/mediatek/Makefile           |  2 +-
>  drivers/soc/mediatek/mtk-scpsys-ext.c   | 99 +++++++++++++++++++++++++
>  drivers/soc/mediatek/mtk-scpsys.c       | 24 ++++++
>  include/linux/soc/mediatek/scpsys-ext.h | 39 ++++++++++
>  4 files changed, 163 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/soc/mediatek/mtk-scpsys-ext.c
>  create mode 100644 include/linux/soc/mediatek/scpsys-ext.h
>
> diff --git a/drivers/soc/mediatek/Makefile b/drivers/soc/mediatek/Makefile
> index 64ce5eeaba32..b9dbad6b12f9 100644
> --- a/drivers/soc/mediatek/Makefile
> +++ b/drivers/soc/mediatek/Makefile
> @@ -1,4 +1,4 @@
>  obj-$(CONFIG_MTK_CMDQ) += mtk-cmdq-helper.o
> -obj-$(CONFIG_MTK_INFRACFG) += mtk-infracfg.o
> +obj-$(CONFIG_MTK_INFRACFG) += mtk-infracfg.o mtk-scpsys-ext.o
>  obj-$(CONFIG_MTK_PMIC_WRAP) += mtk-pmic-wrap.o
>  obj-$(CONFIG_MTK_SCPSYS) += mtk-scpsys.o
> diff --git a/drivers/soc/mediatek/mtk-scpsys-ext.c b/drivers/soc/mediatek/mtk-scpsys-ext.c
> new file mode 100644
> index 000000000000..f630edb2f65d
> --- /dev/null
> +++ b/drivers/soc/mediatek/mtk-scpsys-ext.c
> @@ -0,0 +1,99 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2018 MediaTek Inc.
> + * Author: Owen Chen <Owen.Chen@mediatek.com>
> + */
> +#include <linux/ktime.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/of_device.h>
> +#include <linux/regmap.h>
> +#include <linux/soc/mediatek/scpsys-ext.h>
> +
> +#define MTK_POLL_DELAY_US   10
> +#define MTK_POLL_TIMEOUT    USEC_PER_SEC
> +
> +static int set_bus_protection(struct regmap *map, u32 mask, u32 ack_mask,
> +               u32 reg_set, u32 reg_sta, u32 reg_en)
> +{
> +       u32 val;
> +
> +       if (reg_set)
> +               regmap_write(map, reg_set, mask);
> +       else
> +               regmap_update_bits(map, reg_en, mask, mask);
> +
> +       return regmap_read_poll_timeout(map, reg_sta,
> +                       val, (val & ack_mask) == ack_mask,
> +                       MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
> +}
> +
> +static int clear_bus_protection(struct regmap *map, u32 mask, u32 ack_mask,
> +               u32 reg_clr, u32 reg_sta, u32 reg_en)
> +{
> +       u32 val;
> +
> +       if (reg_clr)
> +               regmap_write(map, reg_clr, mask);
> +       else
> +               regmap_update_bits(map, reg_en, mask, 0);
> +
> +       return regmap_read_poll_timeout(map, reg_sta,
> +                       val, !(val & ack_mask),
> +                       MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
> +}
> +
> +int mtk_scpsys_ext_set_bus_protection(const struct bus_prot *bp_table,
> +       struct regmap *infracfg, struct regmap *smi_common)
> +{
> +       int i;
> +
> +       for (i = 0; i < MAX_STEPS && bp_table[i].mask; i++) {
> +               struct regmap *map;
> +               int ret;
> +
> +               if (bp_table[i].type == IFR_TYPE)
> +                       map = infracfg;
> +               else if (bp_table[i].type == SMI_TYPE)
> +                       map = smi_common;
> +               else
> +                       return -EINVAL;
> +
> +               ret = set_bus_protection(map,
> +                               bp_table[i].mask, bp_table[i].mask,
> +                               bp_table[i].set_ofs, bp_table[i].sta_ofs,
> +                               bp_table[i].en_ofs);
> +
> +               if (ret)
> +                       return ret;

Should you undo the rest of the operations and clear bus protection on
the ones that were already enabled?

> +       }
> +
> +       return 0;
> +}
> +
> +int mtk_scpsys_ext_clear_bus_protection(const struct bus_prot *bp_table,
> +       struct regmap *infracfg, struct regmap *smi_common)
> +{
> +       int i;
> +
> +       for (i = MAX_STEPS - 1; i >= 0; i--) {

So when you set protection, you stop at the first bp_table[i].mask ==
0, but when you clear it, you call clear_bus_protection for those, as
well. You should just skip over the ones when bp_table[i].mask == 0?

e.g.
if (!bp_table[i].mask)
   continue;

> +               struct regmap *map;
> +               int ret;
> +
> +               if (bp_table[i].type == IFR_TYPE)
> +                       map = infracfg;
> +               else if (bp_table[i].type == SMI_TYPE)
> +                       map = smi_common;
> +               else
> +                       return -EINVAL;
> +
> +               ret = clear_bus_protection(map,
> +                               bp_table[i].mask, bp_table[i].clr_ack_mask,
> +                               bp_table[i].clr_ofs, bp_table[i].sta_ofs,
> +                               bp_table[i].en_ofs);
> +
> +               if (ret)
> +                       return ret;

Similar question, is it ok to just abort? Or should you try to clear
the protection on all others, too?

> +       }
> +
> +       return 0;
> +}
> diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
> index c6360de4e41e..181bf7bce591 100644
> --- a/drivers/soc/mediatek/mtk-scpsys.c
> +++ b/drivers/soc/mediatek/mtk-scpsys.c
> @@ -12,6 +12,7 @@
>  #include <linux/pm_domain.h>
>  #include <linux/regulator/consumer.h>
>  #include <linux/soc/mediatek/infracfg.h>
> +#include <linux/soc/mediatek/scpsys-ext.h>
>
>  #include <dt-bindings/power/mt2701-power.h>
>  #include <dt-bindings/power/mt2712-power.h>
> @@ -121,6 +122,7 @@ static const char * const clk_names[] = {
>   * @basic_clk_name: provide the same purpose with field "clk_id"
>   *                  by declaring basic clock prefix name rather than clk_id.
>   * @caps: The flag for active wake-up action.
> + * @bp_table: The mask table for multiple step bus protection.
>   */
>  struct scp_domain_data {
>         const char *name;
> @@ -132,6 +134,7 @@ struct scp_domain_data {
>         enum clk_id clk_id[MAX_CLKS];
>         const char *basic_clk_name[MAX_CLKS];
>         u8 caps;
> +       struct bus_prot bp_table[MAX_STEPS];
>  };
>
>  struct scp;
> @@ -155,6 +158,7 @@ struct scp {
>         struct device *dev;
>         void __iomem *base;
>         struct regmap *infracfg;
> +       struct regmap *smi_common;
>         struct scp_ctrl_reg ctrl_reg;
>         bool bus_prot_reg_update;
>  };
> @@ -291,6 +295,10 @@ static int scpsys_bus_protect_enable(struct scp_domain *scpd)
>                 ret = mtk_infracfg_set_bus_protection(scp->infracfg,
>                                 scpd->data->bus_prot_mask,
>                                 scp->bus_prot_reg_update);
> +       } else if (scpd->data->bp_table[0].mask) {
> +               ret = mtk_scpsys_ext_set_bus_protection(scpd->data->bp_table,
> +                               scp->infracfg,
> +                               scp->smi_common);
>         }
>
>         return ret;
> @@ -305,6 +313,11 @@ static int scpsys_bus_protect_disable(struct scp_domain *scpd)
>                 ret = mtk_infracfg_clear_bus_protection(scp->infracfg,
>                                 scpd->data->bus_prot_mask,
>                                 scp->bus_prot_reg_update);
> +       } else if (scpd->data->bp_table[0].mask) {
> +               ret = mtk_scpsys_ext_clear_bus_protection(
> +                               scpd->data->bp_table,
> +                               scp->infracfg,
> +                               scp->smi_common);
>         }
>
>         return ret;
> @@ -475,6 +488,17 @@ static struct scp *init_scp(struct platform_device *pdev,
>                 return ERR_CAST(scp->infracfg);
>         }
>
> +       scp->smi_common = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
> +                       "smi_comm");
> +
> +       if (scp->smi_common == ERR_PTR(-ENODEV)) {
> +               scp->smi_common = NULL;
> +       } else if (IS_ERR(scp->smi_common)) {
> +               dev_err(&pdev->dev, "Cannot find smi_common controller: %ld\n",
> +                               PTR_ERR(scp->smi_common));
> +               return ERR_CAST(scp->smi_common);
> +       }
> +
>         for (i = 0; i < num; i++) {
>                 struct scp_domain *scpd = &scp->domains[i];
>                 const struct scp_domain_data *data = &scp_domain_data[i];
> diff --git a/include/linux/soc/mediatek/scpsys-ext.h b/include/linux/soc/mediatek/scpsys-ext.h
> new file mode 100644
> index 000000000000..d0ed295c88a7
> --- /dev/null
> +++ b/include/linux/soc/mediatek/scpsys-ext.h
> @@ -0,0 +1,39 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +#ifndef __SOC_MEDIATEK_SCPSYS_EXT_H
> +#define __SOC_MEDIATEK_SCPSYS_EXT_H
> +
> +#define MAX_STEPS      4
> +
> +#define BUS_PROT(_type, _set_ofs, _clr_ofs,                    \
> +               _en_ofs, _sta_ofs, _mask, _clr_ack_mask) {      \
> +               .type = _type,                                  \
> +               .set_ofs = _set_ofs,                            \
> +               .clr_ofs = _clr_ofs,                            \
> +               .en_ofs = _en_ofs,                              \
> +               .sta_ofs = _sta_ofs,                            \
> +               .mask = _mask,                                  \
> +               .clr_ack_mask = _clr_ack_mask,                  \
> +       }
> +
> +enum regmap_type {

Maybe add INVALID_TYPE = 0, so that you can skip over those when
looping over them, instead of checking if mask is 0?

> +       IFR_TYPE,
> +       SMI_TYPE,
> +       MAX_REGMAP_TYPE,

This is not used, right? Do you really need it?

> +};
> +
> +struct bus_prot {
> +       enum regmap_type type;
> +       u32 set_ofs;
> +       u32 clr_ofs;
> +       u32 en_ofs;
> +       u32 sta_ofs;
> +       u32 mask;
> +       u32 clr_ack_mask;
> +};
> +
> +int mtk_scpsys_ext_set_bus_protection(const struct bus_prot *bp_table,
> +       struct regmap *infracfg, struct regmap *smi_common);
> +int mtk_scpsys_ext_clear_bus_protection(const struct bus_prot *bp_table,
> +       struct regmap *infracfg, struct regmap *smi_common);
> +
> +#endif /* __SOC_MEDIATEK_SCPSYS_EXT_H */
> --
> 2.18.0
>

  reply	other threads:[~2019-03-21  5:58 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-19  8:01 [PATCH v5 00/14] Mediatek MT8183 scpsys support Weiyi Lu
2019-03-19  8:01 ` [PATCH v5 01/14] dt-bindings: mediatek: Add property to mt8183 smi-common Weiyi Lu
2019-03-19  8:01 ` [PATCH v5 02/14] dt-bindings: soc: Add MT8183 power dt-bindings Weiyi Lu
2019-03-19  8:01 ` [PATCH v5 03/14] soc: mediatek: Switch to SPDX license identifier Weiyi Lu
2019-03-19  8:01 ` [PATCH v5 04/14] soc: mediatek: Refactor polling timeout and documentation Weiyi Lu
2019-03-19 11:45   ` Nicolas Boichat
2019-06-19  9:11     ` Weiyi Lu
2019-03-19  8:01 ` [PATCH v5 05/14] soc: mediatek: Refactor regulator control Weiyi Lu
2019-03-19  8:01 ` [PATCH v5 06/14] soc: mediatek: Refactor clock control Weiyi Lu
2019-03-19 12:02   ` Nicolas Boichat
2019-06-19  9:19     ` Weiyi Lu
2019-03-19  8:01 ` [PATCH v5 07/14] soc: mediatek: Refactor sram control Weiyi Lu
2019-03-19 12:07   ` Nicolas Boichat
2019-06-19  9:30     ` Weiyi Lu
2019-03-19  8:01 ` [PATCH v5 08/14] soc: mediatek: Refactor bus protection control Weiyi Lu
2019-03-19 12:09   ` Nicolas Boichat
2019-06-19  9:31     ` Weiyi Lu
2019-03-19  8:01 ` [PATCH v5 09/14] soc: mediatek: Add basic_clk_name to scp_power_data Weiyi Lu
2019-03-21  6:02   ` Nicolas Boichat
2019-06-19  9:36     ` Weiyi Lu
2019-03-19  8:01 ` [PATCH v5 10/14] soc: mediatek: Add multiple step bus protection control Weiyi Lu
2019-03-21  5:57   ` Nicolas Boichat [this message]
2019-06-19  9:43     ` Weiyi Lu
2019-03-19  8:01 ` [PATCH v5 11/14] soc: mediatek: Add subsys clock control for bus protection Weiyi Lu
2019-03-19  8:01 ` [PATCH v5 12/14] soc: mediatek: Add extra sram control Weiyi Lu
2019-03-19  8:01 ` [PATCH v5 13/14] soc: mediatek: Add MT8183 scpsys support Weiyi Lu
2019-03-19  8:01 ` [PATCH v5 14/14] arm64: dts: Add power controller device node of MT8183 Weiyi Lu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CANMq1KAU4o1ad+CM09QtPTGey+mzheg3bR4+iDXpcW+znRC9fQ@mail.gmail.com \
    --to=drinkcat@chromium.org \
    --cc=fan.chen@mediatek.com \
    --cc=jamesjj.liao@mediatek.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=robh@kernel.org \
    --cc=srv_heupstream@mediatek.com \
    --cc=weiyi.lu@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).