Re: [PATCH] HID: logitech-hidpp: add support for the Powerplay mat/receiver

[Benjamin Tissoires <benjamin.tissoires@redhat.com>]

Hi Filipe,

On Mon, Jan 13, 2020 at 6:54 AM Filipe Laíns <lains@archlinux.org> wrote:
>
> On Sun, 2020-01-12 at 20:50 +0000, Filipe Laíns wrote:
> > The Logitech G Powerplay has a lightspeed receiver with a static
> > HID++
> > device with ID 7 attached to it to. It is used to configure the led
> > on
> > the mat. For this reason I increased the max number of devices.
> >
> > I also marked all lightspeed devices as HID++ compatible. As the
> > internal powerplay device does not have REPORT_TYPE_KEYBOARD or
> > REPORT_TYPE_KEYBOARD it was not being marked as HID++ compatible in
>   ^^^^^^^^^^^^^^^^^^^^
>    REPORT_TYPE_MOUSE
>
> Err, should I send another patch?

Yes please.

There are a few reasons for that:
- it takes more time to actually edit your commit message when
applying it, and this way I am actually testing your commit, not the
edited one
- it also means I have to remember that I need to fix up the commit
message (while if you send an updated version, you ensure that I will
not forget about it)
- it's a one patch series, so we can just have a look at the v2 (it
would have been a 20 patch series, things would have been different
because sending a v2 for one typo means you are sending 20 emails in
other maintainers mailbox)
- it's more efficient (you don't lose one hour waiting for me to
answer) to just send the v2 and a message telling us to discard the v1
:)

Cheers,
Benjamin
-

>
> > logi_hidpp_dev_conn_notif_equad.
> >
> > Signed-off-by: Filipe Laíns <lains@archlinux.org>
> > ---
> >  drivers/hid/hid-logitech-dj.c | 10 +++++++---
> >  1 file changed, 7 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-
> > logitech-dj.c
> > index bb50d6e7745b..732380b55b15 100644
> > --- a/drivers/hid/hid-logitech-dj.c
> > +++ b/drivers/hid/hid-logitech-dj.c
> > @@ -16,11 +16,11 @@
> >  #include <asm/unaligned.h>
> >  #include "hid-ids.h"
> >
> > -#define DJ_MAX_PAIRED_DEVICES                        6
> > +#define DJ_MAX_PAIRED_DEVICES                        7
> >  #define DJ_MAX_NUMBER_NOTIFS                 8
> >  #define DJ_RECEIVER_INDEX                    0
> >  #define DJ_DEVICE_INDEX_MIN                  1
> > -#define DJ_DEVICE_INDEX_MAX                  6
> > +#define DJ_DEVICE_INDEX_MAX                  7
> >
> >  #define DJREPORT_SHORT_LENGTH                        15
> >  #define DJREPORT_LONG_LENGTH                 32
> > @@ -971,7 +971,7 @@ static void logi_hidpp_recv_queue_notif(struct
> > hid_device *hdev,
> >       case 0x0c:
> >               device_type = "eQUAD Lightspeed 1";
> >               logi_hidpp_dev_conn_notif_equad(hdev, hidpp_report,
> > &workitem);
> > -             workitem.reports_supported |= STD_KEYBOARD;
> > +             workitem.reports_supported |= STD_KEYBOARD | HIDPP;
> >               break;
> >       case 0x0d:
> >               device_type = "eQUAD Lightspeed 1_1";
> > @@ -1850,6 +1850,10 @@ static const struct hid_device_id
> > logi_dj_receivers[] = {
> >         HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
> >               USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_1),
> >        .driver_data = recvr_type_gaming_hidpp},
> > +     { /* Logitech powerplay mat/receiver (0xc539) */
> > +       HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
> > +             0xc53a),
> > +      .driver_data = recvr_type_gaming_hidpp},
> >       { /* Logitech 27 MHz HID++ 1.0 receiver (0xc513) */
> >         HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
> > USB_DEVICE_ID_MX3000_RECEIVER),
> >        .driver_data = recvr_type_27mhz},
>
> --
> Filipe Laíns