From: "Filipe Laíns" <lains@archlinux.org>
To: Jiri Kosina <jikos@kernel.org>,
Benjamin Tissoires <benjamin.tissoires@redhat.com>,
linux-input@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] HID: logitech-hidpp: add support for the Powerplay mat/receiver
Date: Sun, 12 Jan 2020 20:54:22 +0000 [thread overview]
Message-ID: <a69fce19ca3fe0c1f27c66b2444dc82891e8cf41.camel@archlinux.org> (raw)
In-Reply-To: <20200112205021.3004703-1-lains@archlinux.org>
[-- Attachment #1: Type: text/plain, Size: 2409 bytes --]
On Sun, 2020-01-12 at 20:50 +0000, Filipe Laíns wrote:
> The Logitech G Powerplay has a lightspeed receiver with a static
> HID++
> device with ID 7 attached to it to. It is used to configure the led
> on
> the mat. For this reason I increased the max number of devices.
>
> I also marked all lightspeed devices as HID++ compatible. As the
> internal powerplay device does not have REPORT_TYPE_KEYBOARD or
> REPORT_TYPE_KEYBOARD it was not being marked as HID++ compatible in
^^^^^^^^^^^^^^^^^^^^
REPORT_TYPE_MOUSE
Err, should I send another patch?
> logi_hidpp_dev_conn_notif_equad.
>
> Signed-off-by: Filipe Laíns <lains@archlinux.org>
> ---
> drivers/hid/hid-logitech-dj.c | 10 +++++++---
> 1 file changed, 7 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-
> logitech-dj.c
> index bb50d6e7745b..732380b55b15 100644
> --- a/drivers/hid/hid-logitech-dj.c
> +++ b/drivers/hid/hid-logitech-dj.c
> @@ -16,11 +16,11 @@
> #include <asm/unaligned.h>
> #include "hid-ids.h"
>
> -#define DJ_MAX_PAIRED_DEVICES 6
> +#define DJ_MAX_PAIRED_DEVICES 7
> #define DJ_MAX_NUMBER_NOTIFS 8
> #define DJ_RECEIVER_INDEX 0
> #define DJ_DEVICE_INDEX_MIN 1
> -#define DJ_DEVICE_INDEX_MAX 6
> +#define DJ_DEVICE_INDEX_MAX 7
>
> #define DJREPORT_SHORT_LENGTH 15
> #define DJREPORT_LONG_LENGTH 32
> @@ -971,7 +971,7 @@ static void logi_hidpp_recv_queue_notif(struct
> hid_device *hdev,
> case 0x0c:
> device_type = "eQUAD Lightspeed 1";
> logi_hidpp_dev_conn_notif_equad(hdev, hidpp_report,
> &workitem);
> - workitem.reports_supported |= STD_KEYBOARD;
> + workitem.reports_supported |= STD_KEYBOARD | HIDPP;
> break;
> case 0x0d:
> device_type = "eQUAD Lightspeed 1_1";
> @@ -1850,6 +1850,10 @@ static const struct hid_device_id
> logi_dj_receivers[] = {
> HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
> USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_1),
> .driver_data = recvr_type_gaming_hidpp},
> + { /* Logitech powerplay mat/receiver (0xc539) */
> + HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
> + 0xc53a),
> + .driver_data = recvr_type_gaming_hidpp},
> { /* Logitech 27 MHz HID++ 1.0 receiver (0xc513) */
> HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
> USB_DEVICE_ID_MX3000_RECEIVER),
> .driver_data = recvr_type_27mhz},
--
Filipe Laíns
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next prev parent reply other threads:[~2020-01-12 20:54 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-12 20:50 [PATCH] HID: logitech-hidpp: add support for the Powerplay mat/receiver Filipe Laíns
2020-01-12 20:54 ` Filipe Laíns [this message]
2020-01-12 22:02 ` Benjamin Tissoires
2020-01-13 15:31 ` Filipe Laíns
2020-01-14 10:48 ` Benjamin Tissoires
2020-01-14 0:55 ` Filipe Laíns
2020-01-14 11:08 ` Benjamin Tissoires
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a69fce19ca3fe0c1f27c66b2444dc82891e8cf41.camel@archlinux.org \
--to=lains@archlinux.org \
--cc=benjamin.tissoires@redhat.com \
--cc=jikos@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).