* [PATCH v2 1/2] mfd: cros: add "base attached" MKBP switch definition
@ 2018-10-05 18:41 Dmitry Torokhov
2018-10-05 18:41 ` [PATCH v2 2/2] HID: google: add support tablet mode switch for Whiskers Dmitry Torokhov
2018-10-09 6:28 ` [PATCH v2 1/2] mfd: cros: add "base attached" MKBP switch definition Lee Jones
0 siblings, 2 replies; 5+ messages in thread
From: Dmitry Torokhov @ 2018-10-05 18:41 UTC (permalink / raw)
To: Jiri Kosina, Lee Jones
Cc: Benjamin Tissoires, linux-input, linux-kernel, Nicolas Boichat
This adds a "base attached" switch definition to the MKBP protocol that
is used by Whiskers driver to properly determine device state (clamshell
vs tablet mode).
Signed-off-by: Dmitry Torokhov <dtor@chromium.org>
---
v2 changes: None
Lee, I was wondering if it would be OK for cros_ec_commands.h to be
merged through HID tree.
include/linux/mfd/cros_ec_commands.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 20ee71f10865..5fd0e429f472 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -2132,6 +2132,7 @@ struct ec_response_get_next_event_v1 {
/* Switches */
#define EC_MKBP_LID_OPEN 0
#define EC_MKBP_TABLET_MODE 1
+#define EC_MKBP_BASE_ATTACHED 2
/*****************************************************************************/
/* Temperature sensor commands */
--
2.19.0.605.g01d371f741-goog
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v2 2/2] HID: google: add support tablet mode switch for Whiskers
2018-10-05 18:41 [PATCH v2 1/2] mfd: cros: add "base attached" MKBP switch definition Dmitry Torokhov
@ 2018-10-05 18:41 ` Dmitry Torokhov
2018-10-09 8:13 ` Benjamin Tissoires
2018-10-09 6:28 ` [PATCH v2 1/2] mfd: cros: add "base attached" MKBP switch definition Lee Jones
1 sibling, 1 reply; 5+ messages in thread
From: Dmitry Torokhov @ 2018-10-05 18:41 UTC (permalink / raw)
To: Jiri Kosina, Lee Jones
Cc: Benjamin Tissoires, linux-input, linux-kernel, Nicolas Boichat
Whiskers is a foldable base, and thus requires combining "base presence"
signal coming from EC with base state signal (folded/unfolded) coming
from USB/HID interface to produce proper SW_TABLET_MODE event.
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Dmitry Torokhov <dtor@chromium.org>
---
v2 changes (addressing Benjamin comments):
- moved everything into hid-google-hammer.c
- dropped USB interface parsing in favor of report parsing
- removed product/model from tablet mode switch device (this is different
from what Benjamin requested - using Google USB vendor ID - but
it is purely host interface - BUS_HOST - not USB or I2C, and those do
not carry vendor/product ID typically. Userspace is simply supposed
to check capabilities of the device).
drivers/hid/hid-google-hammer.c | 413 ++++++++++++++++++++++++++++++--
1 file changed, 394 insertions(+), 19 deletions(-)
diff --git a/drivers/hid/hid-google-hammer.c b/drivers/hid/hid-google-hammer.c
index 6bf4da7ad63a..de3e7d055ca4 100644
--- a/drivers/hid/hid-google-hammer.c
+++ b/drivers/hid/hid-google-hammer.c
@@ -13,16 +13,268 @@
* any later version.
*/
+#include <linux/acpi.h>
#include <linux/hid.h>
#include <linux/leds.h>
+#include <linux/mfd/cros_ec.h>
+#include <linux/mfd/cros_ec_commands.h>
#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_wakeup.h>
+#include <asm/unaligned.h>
#include "hid-ids.h"
-#define MAX_BRIGHTNESS 100
+/*
+ * C(hrome)B(ase)A(ttached)S(witch) - switch exported by Chrome EC and reporting
+ * state of the "Whiskers" base - attached or detached. Whiskers USB device also
+ * reports position of the keyboard - folded or not. Combining base state and
+ * position allows us to generate proper "Tablet mode" events.
+ */
+struct cbas_ec {
+ struct device *dev; /* The platform device (EC) */
+ struct input_dev *input;
+ bool base_present;
+ struct notifier_block notifier;
+};
-/* HID usage for keyboard backlight (Alphanumeric display brightness) */
-#define HID_AD_BRIGHTNESS 0x00140046
+static struct cbas_ec cbas_ec;
+static DEFINE_SPINLOCK(cbas_ec_lock);
+static DEFINE_MUTEX(cbas_ec_reglock);
+
+static bool cbas_parse_base_state(const void *data)
+{
+ u32 switches = get_unaligned_le32(data);
+
+ return !!(switches & BIT(EC_MKBP_BASE_ATTACHED));
+}
+
+static int cbas_ec_query_base(struct cros_ec_device *ec_dev, bool get_state,
+ bool *state)
+{
+ struct ec_params_mkbp_info *params;
+ struct cros_ec_command *msg;
+ int ret;
+
+ msg = kzalloc(sizeof(*msg) + max(sizeof(u32), sizeof(*params)),
+ GFP_KERNEL);
+ if (!msg)
+ return -ENOMEM;
+
+ msg->command = EC_CMD_MKBP_INFO;
+ msg->version = 1;
+ msg->outsize = sizeof(*params);
+ msg->insize = sizeof(u32);
+ params = (struct ec_params_mkbp_info *)msg->data;
+ params->info_type = get_state ?
+ EC_MKBP_INFO_CURRENT : EC_MKBP_INFO_SUPPORTED;
+ params->event_type = EC_MKBP_EVENT_SWITCH;
+
+ ret = cros_ec_cmd_xfer_status(ec_dev, msg);
+ if (ret >= 0) {
+ if (ret != sizeof(u32)) {
+ dev_warn(ec_dev->dev, "wrong result size: %d != %zu\n",
+ ret, sizeof(u32));
+ ret = -EPROTO;
+ } else {
+ *state = cbas_parse_base_state(msg->data);
+ ret = 0;
+ }
+ }
+
+ kfree(msg);
+
+ return ret;
+}
+
+static int cbas_ec_notify(struct notifier_block *nb,
+ unsigned long queued_during_suspend,
+ void *_notify)
+{
+ struct cros_ec_device *ec = _notify;
+ unsigned long flags;
+ bool base_present;
+
+ if (ec->event_data.event_type == EC_MKBP_EVENT_SWITCH) {
+ base_present = cbas_parse_base_state(
+ &ec->event_data.data.switches);
+ dev_dbg(cbas_ec.dev,
+ "%s: base: %d\n", __func__, base_present);
+
+ if (device_may_wakeup(cbas_ec.dev) ||
+ !queued_during_suspend) {
+
+ pm_wakeup_event(cbas_ec.dev, 0);
+
+ spin_lock_irqsave(&cbas_ec_lock, flags);
+
+ /*
+ * While input layer dedupes the events, we do not want
+ * to disrupt the state reported by the base by
+ * overriding it with state reported by the LID. Only
+ * report changes, as we assume that on attach the base
+ * is not folded.
+ */
+ if (base_present != cbas_ec.base_present) {
+ input_report_switch(cbas_ec.input,
+ SW_TABLET_MODE,
+ !base_present);
+ input_sync(cbas_ec.input);
+ cbas_ec.base_present = base_present;
+ }
+
+ spin_unlock_irqrestore(&cbas_ec_lock, flags);
+ }
+ }
+
+ return NOTIFY_OK;
+}
+
+static __maybe_unused int cbas_ec_resume(struct device *dev)
+{
+ struct cros_ec_device *ec = dev_get_drvdata(dev->parent);
+ bool base_present;
+ int error;
+
+ error = cbas_ec_query_base(ec, true, &base_present);
+ if (error) {
+ dev_warn(dev, "failed to fetch base state on resume: %d\n",
+ error);
+ } else {
+ spin_lock_irq(&cbas_ec_lock);
+
+ cbas_ec.base_present = base_present;
+
+ /*
+ * Only report if base is disconnected. If base is connected,
+ * it will resend its state on resume, and we'll update it
+ * in hammer_event().
+ */
+ if (!cbas_ec.base_present) {
+ input_report_switch(cbas_ec.input, SW_TABLET_MODE, 1);
+ input_sync(cbas_ec.input);
+ }
+
+ spin_unlock_irq(&cbas_ec_lock);
+ }
+
+ return 0;
+}
+
+static const SIMPLE_DEV_PM_OPS(cbas_ec_pm_ops, NULL, cbas_ec_resume);
+
+static void cbas_ec_set_input(struct input_dev *input)
+{
+ /* Take the lock so hammer_event() does not race with us here */
+ spin_lock_irq(&cbas_ec_lock);
+ cbas_ec.input = input;
+ spin_unlock_irq(&cbas_ec_lock);
+}
+
+static int __cbas_ec_probe(struct platform_device *pdev)
+{
+ struct cros_ec_device *ec = dev_get_drvdata(pdev->dev.parent);
+ struct input_dev *input;
+ bool base_supported;
+ int error;
+
+ error = cbas_ec_query_base(ec, false, &base_supported);
+ if (error)
+ return error;
+
+ if (!base_supported)
+ return -ENXIO;
+
+ input = devm_input_allocate_device(&pdev->dev);
+ if (!input)
+ return -ENOMEM;
+
+ input->name = "Whiskers Tablet Mode Switch";
+ input->id.bustype = BUS_HOST;
+
+ input_set_capability(input, EV_SW, SW_TABLET_MODE);
+
+ error = input_register_device(input);
+ if (error) {
+ dev_err(&pdev->dev, "cannot register input device: %d\n",
+ error);
+ return error;
+ }
+
+ /* Seed the state */
+ error = cbas_ec_query_base(ec, true, &cbas_ec.base_present);
+ if (error) {
+ dev_err(&pdev->dev, "cannot query base state: %d\n", error);
+ return error;
+ }
+
+ input_report_switch(input, SW_TABLET_MODE, !cbas_ec.base_present);
+
+ cbas_ec_set_input(input);
+
+ cbas_ec.dev = &pdev->dev;
+ cbas_ec.notifier.notifier_call = cbas_ec_notify;
+ error = blocking_notifier_chain_register(&ec->event_notifier,
+ &cbas_ec.notifier);
+ if (error) {
+ dev_err(&pdev->dev, "cannot register notifier: %d\n", error);
+ cbas_ec_set_input(NULL);
+ return error;
+ }
+
+ device_init_wakeup(&pdev->dev, true);
+ return 0;
+}
+
+static int cbas_ec_probe(struct platform_device *pdev)
+{
+ int retval;
+
+ mutex_lock(&cbas_ec_reglock);
+
+ if (cbas_ec.input) {
+ retval = -EBUSY;
+ goto out;
+ }
+
+ retval = __cbas_ec_probe(pdev);
+
+out:
+ mutex_unlock(&cbas_ec_reglock);
+ return retval;
+}
+
+static int cbas_ec_remove(struct platform_device *pdev)
+{
+ struct cros_ec_device *ec = dev_get_drvdata(pdev->dev.parent);
+
+ mutex_lock(&cbas_ec_reglock);
+
+ blocking_notifier_chain_unregister(&ec->event_notifier,
+ &cbas_ec.notifier);
+ cbas_ec_set_input(NULL);
+
+ mutex_unlock(&cbas_ec_reglock);
+ return 0;
+}
+
+static const struct acpi_device_id cbas_ec_acpi_ids[] = {
+ { "GOOG000B", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(acpi, cbas_ec_acpi_ids);
+
+static struct platform_driver cbas_ec_driver = {
+ .probe = cbas_ec_probe,
+ .remove = cbas_ec_remove,
+ .driver = {
+ .name = "cbas_ec",
+ .acpi_match_table = ACPI_PTR(cbas_ec_acpi_ids),
+ .pm = &cbas_ec_pm_ops,
+ },
+};
+
+#define MAX_BRIGHTNESS 100
struct hammer_kbd_leds {
struct led_classdev cdev;
@@ -90,33 +342,130 @@ static int hammer_register_leds(struct hid_device *hdev)
return devm_led_classdev_register(&hdev->dev, &kbd_backlight->cdev);
}
-static int hammer_input_configured(struct hid_device *hdev,
- struct hid_input *hi)
+#define HID_UP_GOOGLEVENDOR 0xffd10000
+#define HID_VD_KBD_FOLDED 0x00000019
+#define WHISKERS_KBD_FOLDED (HID_UP_GOOGLEVENDOR | HID_VD_KBD_FOLDED)
+
+/* HID usage for keyboard backlight (Alphanumeric display brightness) */
+#define HID_AD_BRIGHTNESS 0x00140046
+
+static int hammer_input_mapping(struct hid_device *hdev, struct hid_input *hi,
+ struct hid_field *field,
+ struct hid_usage *usage,
+ unsigned long **bit, int *max)
{
- struct list_head *report_list =
- &hdev->report_enum[HID_OUTPUT_REPORT].report_list;
+ if (hdev->product == USB_DEVICE_ID_GOOGLE_WHISKERS &&
+ usage->hid == WHISKERS_KBD_FOLDED) {
+ /*
+ * We do not want to have this usage mapped as it will get
+ * mixed in with "base attached" signal and delivered over
+ * separate input device for tablet switch mode.
+ */
+ return -1;
+ }
+
+ return 0;
+}
+
+static int hammer_event(struct hid_device *hid, struct hid_field *field,
+ struct hid_usage *usage, __s32 value)
+{
+ unsigned long flags;
+
+ if (hid->product == USB_DEVICE_ID_GOOGLE_WHISKERS &&
+ usage->hid == WHISKERS_KBD_FOLDED) {
+ spin_lock_irqsave(&cbas_ec_lock, flags);
+
+ hid_dbg(hid, "%s: base: %d, folded: %d\n", __func__,
+ cbas_ec.base_present, value);
+
+ /*
+ * We should not get event if base is detached, but in case
+ * we happen to service HID and EC notifications out of order
+ * let's still check the "base present" flag.
+ */
+ if (cbas_ec.input && cbas_ec.base_present) {
+ input_report_switch(cbas_ec.input,
+ SW_TABLET_MODE, value);
+ input_sync(cbas_ec.input);
+ }
+
+ spin_unlock_irqrestore(&cbas_ec_lock, flags);
+ return 1; /* We handled this event */
+ }
+
+ return 0;
+}
+
+static bool hammer_is_keyboard_interface(struct hid_device *hdev)
+{
+ struct hid_report_enum *re = &hdev->report_enum[HID_INPUT_REPORT];
struct hid_report *report;
- if (list_empty(report_list))
- return 0;
+ list_for_each_entry(report, &re->report_list, list)
+ if (report->application == HID_GD_KEYBOARD)
+ return true;
- report = list_first_entry(report_list, struct hid_report, list);
+ return false;
+}
+
+static bool hammer_has_backlight_control(struct hid_device *hdev)
+{
+ struct hid_report_enum *re = &hdev->report_enum[HID_OUTPUT_REPORT];
+ struct hid_report *report;
+ int i, j;
- if (report->maxfield == 1 &&
- report->field[0]->application == HID_GD_KEYBOARD &&
- report->field[0]->maxusage == 1 &&
- report->field[0]->usage[0].hid == HID_AD_BRIGHTNESS) {
- int err = hammer_register_leds(hdev);
+ list_for_each_entry(report, &re->report_list, list) {
+ if (report->application != HID_GD_KEYBOARD)
+ continue;
- if (err)
+ for (i = 0; i < report->maxfield; i++) {
+ struct hid_field *field = report->field[i];
+
+ for (j = 0; j < field->maxusage; j++)
+ if (field->usage[j].hid == HID_AD_BRIGHTNESS)
+ return true;
+ }
+ }
+
+ return false;
+}
+
+static int hammer_probe(struct hid_device *hdev,
+ const struct hid_device_id *id)
+{
+ int error;
+
+ /*
+ * We always want to poll for, and handle tablet mode events from
+ * Whiskers, even when nobody has opened the input device. This also
+ * prevents the hid core from dropping early tablet mode events from
+ * the device.
+ */
+ if (hdev->product == USB_DEVICE_ID_GOOGLE_WHISKERS &&
+ hammer_is_keyboard_interface(hdev))
+ hdev->quirks |= HID_QUIRK_ALWAYS_POLL;
+
+ error = hid_parse(hdev);
+ if (error)
+ return error;
+
+ error = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+ if (error)
+ return error;
+
+ if (hammer_has_backlight_control(hdev)) {
+ error = hammer_register_leds(hdev);
+ if (error)
hid_warn(hdev,
"Failed to register keyboard backlight: %d\n",
- err);
+ error);
}
return 0;
}
+
static const struct hid_device_id hammer_devices[] = {
{ HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
USB_VENDOR_ID_GOOGLE, USB_DEVICE_ID_GOOGLE_HAMMER) },
@@ -133,8 +482,34 @@ MODULE_DEVICE_TABLE(hid, hammer_devices);
static struct hid_driver hammer_driver = {
.name = "hammer",
.id_table = hammer_devices,
- .input_configured = hammer_input_configured,
+ .probe = hammer_probe,
+ .input_mapping = hammer_input_mapping,
+ .event = hammer_event,
};
-module_hid_driver(hammer_driver);
+
+static int __init hammer_init(void)
+{
+ int error;
+
+ error = platform_driver_register(&cbas_ec_driver);
+ if (error)
+ return error;
+
+ error = hid_register_driver(&hammer_driver);
+ if (error) {
+ platform_driver_unregister(&cbas_ec_driver);
+ return error;
+ }
+
+ return 0;
+}
+module_init(hammer_init);
+
+static void __exit hammer_exit(void)
+{
+ hid_unregister_driver(&hammer_driver);
+ platform_driver_unregister(&cbas_ec_driver);
+}
+module_exit(hammer_exit);
MODULE_LICENSE("GPL");
--
2.19.0.605.g01d371f741-goog
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v2 1/2] mfd: cros: add "base attached" MKBP switch definition
2018-10-05 18:41 [PATCH v2 1/2] mfd: cros: add "base attached" MKBP switch definition Dmitry Torokhov
2018-10-05 18:41 ` [PATCH v2 2/2] HID: google: add support tablet mode switch for Whiskers Dmitry Torokhov
@ 2018-10-09 6:28 ` Lee Jones
2018-10-09 8:41 ` Jiri Kosina
1 sibling, 1 reply; 5+ messages in thread
From: Lee Jones @ 2018-10-09 6:28 UTC (permalink / raw)
To: Dmitry Torokhov
Cc: Jiri Kosina, Benjamin Tissoires, linux-input, linux-kernel,
Nicolas Boichat
On Fri, 05 Oct 2018, Dmitry Torokhov wrote:
> This adds a "base attached" switch definition to the MKBP protocol that
> is used by Whiskers driver to properly determine device state (clamshell
> vs tablet mode).
>
> Signed-off-by: Dmitry Torokhov <dtor@chromium.org>
> ---
>
> v2 changes: None
>
> Lee, I was wondering if it would be OK for cros_ec_commands.h to be
> merged through HID tree.
Yes, so long as it goes through in this merge-window.
Acked-by: Lee Jones <lee.jones@linaro.org>
--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2 2/2] HID: google: add support tablet mode switch for Whiskers
2018-10-05 18:41 ` [PATCH v2 2/2] HID: google: add support tablet mode switch for Whiskers Dmitry Torokhov
@ 2018-10-09 8:13 ` Benjamin Tissoires
0 siblings, 0 replies; 5+ messages in thread
From: Benjamin Tissoires @ 2018-10-09 8:13 UTC (permalink / raw)
To: Dmitry Torokhov
Cc: Jiri Kosina, Lee Jones, open list:HID CORE LAYER, lkml, Nicolas Boichat
On Fri, Oct 5, 2018 at 8:41 PM Dmitry Torokhov <dtor@chromium.org> wrote:
>
> Whiskers is a foldable base, and thus requires combining "base presence"
> signal coming from EC with base state signal (folded/unfolded) coming
> from USB/HID interface to produce proper SW_TABLET_MODE event.
>
> Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
> Signed-off-by: Dmitry Torokhov <dtor@chromium.org>
> ---
>
> v2 changes (addressing Benjamin comments):
Thanks
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cheers,
Benjamin
>
> - moved everything into hid-google-hammer.c
> - dropped USB interface parsing in favor of report parsing
> - removed product/model from tablet mode switch device (this is different
> from what Benjamin requested - using Google USB vendor ID - but
> it is purely host interface - BUS_HOST - not USB or I2C, and those do
> not carry vendor/product ID typically. Userspace is simply supposed
> to check capabilities of the device).
>
> drivers/hid/hid-google-hammer.c | 413 ++++++++++++++++++++++++++++++--
> 1 file changed, 394 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/hid/hid-google-hammer.c b/drivers/hid/hid-google-hammer.c
> index 6bf4da7ad63a..de3e7d055ca4 100644
> --- a/drivers/hid/hid-google-hammer.c
> +++ b/drivers/hid/hid-google-hammer.c
> @@ -13,16 +13,268 @@
> * any later version.
> */
>
> +#include <linux/acpi.h>
> #include <linux/hid.h>
> #include <linux/leds.h>
> +#include <linux/mfd/cros_ec.h>
> +#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_wakeup.h>
> +#include <asm/unaligned.h>
>
> #include "hid-ids.h"
>
> -#define MAX_BRIGHTNESS 100
> +/*
> + * C(hrome)B(ase)A(ttached)S(witch) - switch exported by Chrome EC and reporting
> + * state of the "Whiskers" base - attached or detached. Whiskers USB device also
> + * reports position of the keyboard - folded or not. Combining base state and
> + * position allows us to generate proper "Tablet mode" events.
> + */
> +struct cbas_ec {
> + struct device *dev; /* The platform device (EC) */
> + struct input_dev *input;
> + bool base_present;
> + struct notifier_block notifier;
> +};
>
> -/* HID usage for keyboard backlight (Alphanumeric display brightness) */
> -#define HID_AD_BRIGHTNESS 0x00140046
> +static struct cbas_ec cbas_ec;
> +static DEFINE_SPINLOCK(cbas_ec_lock);
> +static DEFINE_MUTEX(cbas_ec_reglock);
> +
> +static bool cbas_parse_base_state(const void *data)
> +{
> + u32 switches = get_unaligned_le32(data);
> +
> + return !!(switches & BIT(EC_MKBP_BASE_ATTACHED));
> +}
> +
> +static int cbas_ec_query_base(struct cros_ec_device *ec_dev, bool get_state,
> + bool *state)
> +{
> + struct ec_params_mkbp_info *params;
> + struct cros_ec_command *msg;
> + int ret;
> +
> + msg = kzalloc(sizeof(*msg) + max(sizeof(u32), sizeof(*params)),
> + GFP_KERNEL);
> + if (!msg)
> + return -ENOMEM;
> +
> + msg->command = EC_CMD_MKBP_INFO;
> + msg->version = 1;
> + msg->outsize = sizeof(*params);
> + msg->insize = sizeof(u32);
> + params = (struct ec_params_mkbp_info *)msg->data;
> + params->info_type = get_state ?
> + EC_MKBP_INFO_CURRENT : EC_MKBP_INFO_SUPPORTED;
> + params->event_type = EC_MKBP_EVENT_SWITCH;
> +
> + ret = cros_ec_cmd_xfer_status(ec_dev, msg);
> + if (ret >= 0) {
> + if (ret != sizeof(u32)) {
> + dev_warn(ec_dev->dev, "wrong result size: %d != %zu\n",
> + ret, sizeof(u32));
> + ret = -EPROTO;
> + } else {
> + *state = cbas_parse_base_state(msg->data);
> + ret = 0;
> + }
> + }
> +
> + kfree(msg);
> +
> + return ret;
> +}
> +
> +static int cbas_ec_notify(struct notifier_block *nb,
> + unsigned long queued_during_suspend,
> + void *_notify)
> +{
> + struct cros_ec_device *ec = _notify;
> + unsigned long flags;
> + bool base_present;
> +
> + if (ec->event_data.event_type == EC_MKBP_EVENT_SWITCH) {
> + base_present = cbas_parse_base_state(
> + &ec->event_data.data.switches);
> + dev_dbg(cbas_ec.dev,
> + "%s: base: %d\n", __func__, base_present);
> +
> + if (device_may_wakeup(cbas_ec.dev) ||
> + !queued_during_suspend) {
> +
> + pm_wakeup_event(cbas_ec.dev, 0);
> +
> + spin_lock_irqsave(&cbas_ec_lock, flags);
> +
> + /*
> + * While input layer dedupes the events, we do not want
> + * to disrupt the state reported by the base by
> + * overriding it with state reported by the LID. Only
> + * report changes, as we assume that on attach the base
> + * is not folded.
> + */
> + if (base_present != cbas_ec.base_present) {
> + input_report_switch(cbas_ec.input,
> + SW_TABLET_MODE,
> + !base_present);
> + input_sync(cbas_ec.input);
> + cbas_ec.base_present = base_present;
> + }
> +
> + spin_unlock_irqrestore(&cbas_ec_lock, flags);
> + }
> + }
> +
> + return NOTIFY_OK;
> +}
> +
> +static __maybe_unused int cbas_ec_resume(struct device *dev)
> +{
> + struct cros_ec_device *ec = dev_get_drvdata(dev->parent);
> + bool base_present;
> + int error;
> +
> + error = cbas_ec_query_base(ec, true, &base_present);
> + if (error) {
> + dev_warn(dev, "failed to fetch base state on resume: %d\n",
> + error);
> + } else {
> + spin_lock_irq(&cbas_ec_lock);
> +
> + cbas_ec.base_present = base_present;
> +
> + /*
> + * Only report if base is disconnected. If base is connected,
> + * it will resend its state on resume, and we'll update it
> + * in hammer_event().
> + */
> + if (!cbas_ec.base_present) {
> + input_report_switch(cbas_ec.input, SW_TABLET_MODE, 1);
> + input_sync(cbas_ec.input);
> + }
> +
> + spin_unlock_irq(&cbas_ec_lock);
> + }
> +
> + return 0;
> +}
> +
> +static const SIMPLE_DEV_PM_OPS(cbas_ec_pm_ops, NULL, cbas_ec_resume);
> +
> +static void cbas_ec_set_input(struct input_dev *input)
> +{
> + /* Take the lock so hammer_event() does not race with us here */
> + spin_lock_irq(&cbas_ec_lock);
> + cbas_ec.input = input;
> + spin_unlock_irq(&cbas_ec_lock);
> +}
> +
> +static int __cbas_ec_probe(struct platform_device *pdev)
> +{
> + struct cros_ec_device *ec = dev_get_drvdata(pdev->dev.parent);
> + struct input_dev *input;
> + bool base_supported;
> + int error;
> +
> + error = cbas_ec_query_base(ec, false, &base_supported);
> + if (error)
> + return error;
> +
> + if (!base_supported)
> + return -ENXIO;
> +
> + input = devm_input_allocate_device(&pdev->dev);
> + if (!input)
> + return -ENOMEM;
> +
> + input->name = "Whiskers Tablet Mode Switch";
> + input->id.bustype = BUS_HOST;
> +
> + input_set_capability(input, EV_SW, SW_TABLET_MODE);
> +
> + error = input_register_device(input);
> + if (error) {
> + dev_err(&pdev->dev, "cannot register input device: %d\n",
> + error);
> + return error;
> + }
> +
> + /* Seed the state */
> + error = cbas_ec_query_base(ec, true, &cbas_ec.base_present);
> + if (error) {
> + dev_err(&pdev->dev, "cannot query base state: %d\n", error);
> + return error;
> + }
> +
> + input_report_switch(input, SW_TABLET_MODE, !cbas_ec.base_present);
> +
> + cbas_ec_set_input(input);
> +
> + cbas_ec.dev = &pdev->dev;
> + cbas_ec.notifier.notifier_call = cbas_ec_notify;
> + error = blocking_notifier_chain_register(&ec->event_notifier,
> + &cbas_ec.notifier);
> + if (error) {
> + dev_err(&pdev->dev, "cannot register notifier: %d\n", error);
> + cbas_ec_set_input(NULL);
> + return error;
> + }
> +
> + device_init_wakeup(&pdev->dev, true);
> + return 0;
> +}
> +
> +static int cbas_ec_probe(struct platform_device *pdev)
> +{
> + int retval;
> +
> + mutex_lock(&cbas_ec_reglock);
> +
> + if (cbas_ec.input) {
> + retval = -EBUSY;
> + goto out;
> + }
> +
> + retval = __cbas_ec_probe(pdev);
> +
> +out:
> + mutex_unlock(&cbas_ec_reglock);
> + return retval;
> +}
> +
> +static int cbas_ec_remove(struct platform_device *pdev)
> +{
> + struct cros_ec_device *ec = dev_get_drvdata(pdev->dev.parent);
> +
> + mutex_lock(&cbas_ec_reglock);
> +
> + blocking_notifier_chain_unregister(&ec->event_notifier,
> + &cbas_ec.notifier);
> + cbas_ec_set_input(NULL);
> +
> + mutex_unlock(&cbas_ec_reglock);
> + return 0;
> +}
> +
> +static const struct acpi_device_id cbas_ec_acpi_ids[] = {
> + { "GOOG000B", 0 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(acpi, cbas_ec_acpi_ids);
> +
> +static struct platform_driver cbas_ec_driver = {
> + .probe = cbas_ec_probe,
> + .remove = cbas_ec_remove,
> + .driver = {
> + .name = "cbas_ec",
> + .acpi_match_table = ACPI_PTR(cbas_ec_acpi_ids),
> + .pm = &cbas_ec_pm_ops,
> + },
> +};
> +
> +#define MAX_BRIGHTNESS 100
>
> struct hammer_kbd_leds {
> struct led_classdev cdev;
> @@ -90,33 +342,130 @@ static int hammer_register_leds(struct hid_device *hdev)
> return devm_led_classdev_register(&hdev->dev, &kbd_backlight->cdev);
> }
>
> -static int hammer_input_configured(struct hid_device *hdev,
> - struct hid_input *hi)
> +#define HID_UP_GOOGLEVENDOR 0xffd10000
> +#define HID_VD_KBD_FOLDED 0x00000019
> +#define WHISKERS_KBD_FOLDED (HID_UP_GOOGLEVENDOR | HID_VD_KBD_FOLDED)
> +
> +/* HID usage for keyboard backlight (Alphanumeric display brightness) */
> +#define HID_AD_BRIGHTNESS 0x00140046
> +
> +static int hammer_input_mapping(struct hid_device *hdev, struct hid_input *hi,
> + struct hid_field *field,
> + struct hid_usage *usage,
> + unsigned long **bit, int *max)
> {
> - struct list_head *report_list =
> - &hdev->report_enum[HID_OUTPUT_REPORT].report_list;
> + if (hdev->product == USB_DEVICE_ID_GOOGLE_WHISKERS &&
> + usage->hid == WHISKERS_KBD_FOLDED) {
> + /*
> + * We do not want to have this usage mapped as it will get
> + * mixed in with "base attached" signal and delivered over
> + * separate input device for tablet switch mode.
> + */
> + return -1;
> + }
> +
> + return 0;
> +}
> +
> +static int hammer_event(struct hid_device *hid, struct hid_field *field,
> + struct hid_usage *usage, __s32 value)
> +{
> + unsigned long flags;
> +
> + if (hid->product == USB_DEVICE_ID_GOOGLE_WHISKERS &&
> + usage->hid == WHISKERS_KBD_FOLDED) {
> + spin_lock_irqsave(&cbas_ec_lock, flags);
> +
> + hid_dbg(hid, "%s: base: %d, folded: %d\n", __func__,
> + cbas_ec.base_present, value);
> +
> + /*
> + * We should not get event if base is detached, but in case
> + * we happen to service HID and EC notifications out of order
> + * let's still check the "base present" flag.
> + */
> + if (cbas_ec.input && cbas_ec.base_present) {
> + input_report_switch(cbas_ec.input,
> + SW_TABLET_MODE, value);
> + input_sync(cbas_ec.input);
> + }
> +
> + spin_unlock_irqrestore(&cbas_ec_lock, flags);
> + return 1; /* We handled this event */
> + }
> +
> + return 0;
> +}
> +
> +static bool hammer_is_keyboard_interface(struct hid_device *hdev)
> +{
> + struct hid_report_enum *re = &hdev->report_enum[HID_INPUT_REPORT];
> struct hid_report *report;
>
> - if (list_empty(report_list))
> - return 0;
> + list_for_each_entry(report, &re->report_list, list)
> + if (report->application == HID_GD_KEYBOARD)
> + return true;
>
> - report = list_first_entry(report_list, struct hid_report, list);
> + return false;
> +}
> +
> +static bool hammer_has_backlight_control(struct hid_device *hdev)
> +{
> + struct hid_report_enum *re = &hdev->report_enum[HID_OUTPUT_REPORT];
> + struct hid_report *report;
> + int i, j;
>
> - if (report->maxfield == 1 &&
> - report->field[0]->application == HID_GD_KEYBOARD &&
> - report->field[0]->maxusage == 1 &&
> - report->field[0]->usage[0].hid == HID_AD_BRIGHTNESS) {
> - int err = hammer_register_leds(hdev);
> + list_for_each_entry(report, &re->report_list, list) {
> + if (report->application != HID_GD_KEYBOARD)
> + continue;
>
> - if (err)
> + for (i = 0; i < report->maxfield; i++) {
> + struct hid_field *field = report->field[i];
> +
> + for (j = 0; j < field->maxusage; j++)
> + if (field->usage[j].hid == HID_AD_BRIGHTNESS)
> + return true;
> + }
> + }
> +
> + return false;
> +}
> +
> +static int hammer_probe(struct hid_device *hdev,
> + const struct hid_device_id *id)
> +{
> + int error;
> +
> + /*
> + * We always want to poll for, and handle tablet mode events from
> + * Whiskers, even when nobody has opened the input device. This also
> + * prevents the hid core from dropping early tablet mode events from
> + * the device.
> + */
> + if (hdev->product == USB_DEVICE_ID_GOOGLE_WHISKERS &&
> + hammer_is_keyboard_interface(hdev))
> + hdev->quirks |= HID_QUIRK_ALWAYS_POLL;
> +
> + error = hid_parse(hdev);
> + if (error)
> + return error;
> +
> + error = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
> + if (error)
> + return error;
> +
> + if (hammer_has_backlight_control(hdev)) {
> + error = hammer_register_leds(hdev);
> + if (error)
> hid_warn(hdev,
> "Failed to register keyboard backlight: %d\n",
> - err);
> + error);
> }
>
> return 0;
> }
>
> +
> static const struct hid_device_id hammer_devices[] = {
> { HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
> USB_VENDOR_ID_GOOGLE, USB_DEVICE_ID_GOOGLE_HAMMER) },
> @@ -133,8 +482,34 @@ MODULE_DEVICE_TABLE(hid, hammer_devices);
> static struct hid_driver hammer_driver = {
> .name = "hammer",
> .id_table = hammer_devices,
> - .input_configured = hammer_input_configured,
> + .probe = hammer_probe,
> + .input_mapping = hammer_input_mapping,
> + .event = hammer_event,
> };
> -module_hid_driver(hammer_driver);
> +
> +static int __init hammer_init(void)
> +{
> + int error;
> +
> + error = platform_driver_register(&cbas_ec_driver);
> + if (error)
> + return error;
> +
> + error = hid_register_driver(&hammer_driver);
> + if (error) {
> + platform_driver_unregister(&cbas_ec_driver);
> + return error;
> + }
> +
> + return 0;
> +}
> +module_init(hammer_init);
> +
> +static void __exit hammer_exit(void)
> +{
> + hid_unregister_driver(&hammer_driver);
> + platform_driver_unregister(&cbas_ec_driver);
> +}
> +module_exit(hammer_exit);
>
> MODULE_LICENSE("GPL");
> --
> 2.19.0.605.g01d371f741-goog
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2 1/2] mfd: cros: add "base attached" MKBP switch definition
2018-10-09 6:28 ` [PATCH v2 1/2] mfd: cros: add "base attached" MKBP switch definition Lee Jones
@ 2018-10-09 8:41 ` Jiri Kosina
0 siblings, 0 replies; 5+ messages in thread
From: Jiri Kosina @ 2018-10-09 8:41 UTC (permalink / raw)
To: Lee Jones
Cc: Dmitry Torokhov, Benjamin Tissoires, linux-input, linux-kernel,
Nicolas Boichat
On Mon, 8 Oct 2018, Lee Jones wrote:
> > This adds a "base attached" switch definition to the MKBP protocol that
> > is used by Whiskers driver to properly determine device state (clamshell
> > vs tablet mode).
> >
> > Signed-off-by: Dmitry Torokhov <dtor@chromium.org>
> > ---
> >
> > v2 changes: None
> >
> > Lee, I was wondering if it would be OK for cros_ec_commands.h to be
> > merged through HID tree.
>
> Yes, so long as it goes through in this merge-window.
>
> Acked-by: Lee Jones <lee.jones@linaro.org>
Thanks; both patches now queued in hid.git#for-4.20/google
--
Jiri Kosina
SUSE Labs
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2018-10-09 8:41 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-10-05 18:41 [PATCH v2 1/2] mfd: cros: add "base attached" MKBP switch definition Dmitry Torokhov
2018-10-05 18:41 ` [PATCH v2 2/2] HID: google: add support tablet mode switch for Whiskers Dmitry Torokhov
2018-10-09 8:13 ` Benjamin Tissoires
2018-10-09 6:28 ` [PATCH v2 1/2] mfd: cros: add "base attached" MKBP switch definition Lee Jones
2018-10-09 8:41 ` Jiri Kosina
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).