* [PATCH v6] hid-logitech-hidpp: read battery voltage from newer devices
@ 2019-10-26 22:25 Pedro Vanzella
2019-12-18 15:52 ` Benjamin Tissoires
0 siblings, 1 reply; 2+ messages in thread
From: Pedro Vanzella @ 2019-10-26 22:25 UTC (permalink / raw)
To: linux-input
Cc: lains, Pedro Vanzella, Jiri Kosina, Benjamin Tissoires, linux-kernel
Newer Logitech mice report their battery voltage through feature 0x1001
instead of the battery levels through feature 0x1000.
When the device is brought up and we try to query the battery, figure
out if it supports the old or the new feature. If it supports the new
feature, record the feature index and read the battery voltage and
its charge status. The device will respond with three bytes: the first
two are its voltage, and the last one is a bitset, reporting if the
battery is charging, fast or slow, in critical level or discharging.
If everything went correctly, record the fact that we're capable
of querying battery voltage.
Note that the protocol only gives us the current voltage in mV.
We store that as-is, but when queried, we report it in uV as
expected by sysfs.
Like we do for other ways of interacting with the battery for other
devices, refresh the battery status and notify the power supply
subsystem of the changes in voltage and status.
Since there are no known devices which implement both the old and the
new battery feature, we make sure to try the newer feature first and
only fall back to the old one if that fails.
Signed-off-by: Pedro Vanzella <pedro@pedrovanzella.com>
---
drivers/hid/hid-logitech-hidpp.c | 172 ++++++++++++++++++++++++++++++-
1 file changed, 168 insertions(+), 4 deletions(-)
diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c
index 0179f7ed77e5..959586dab535 100644
--- a/drivers/hid/hid-logitech-hidpp.c
+++ b/drivers/hid/hid-logitech-hidpp.c
@@ -87,6 +87,7 @@ MODULE_PARM_DESC(disable_tap_to_click,
#define HIDPP_CAPABILITY_HIDPP20_BATTERY BIT(1)
#define HIDPP_CAPABILITY_BATTERY_MILEAGE BIT(2)
#define HIDPP_CAPABILITY_BATTERY_LEVEL_STATUS BIT(3)
+#define HIDPP_CAPABILITY_BATTERY_VOLTAGE BIT(4)
/*
* There are two hidpp protocols in use, the first version hidpp10 is known
@@ -135,12 +136,15 @@ struct hidpp_report {
struct hidpp_battery {
u8 feature_index;
u8 solar_feature_index;
+ u8 voltage_feature_index;
struct power_supply_desc desc;
struct power_supply *ps;
char name[64];
int status;
int capacity;
int level;
+ int voltage;
+ int charge_type;
bool online;
};
@@ -1219,6 +1223,144 @@ static int hidpp20_battery_event(struct hidpp_device *hidpp,
return 0;
}
+/* -------------------------------------------------------------------------- */
+/* 0x1001: Battery voltage */
+/* -------------------------------------------------------------------------- */
+
+#define HIDPP_PAGE_BATTERY_VOLTAGE 0x1001
+
+#define CMD_BATTERY_VOLTAGE_GET_BATTERY_VOLTAGE 0x00
+
+#define EVENT_BATTERY_VOLTAGE_STATUS_BROADCAST 0x00
+
+static int hidpp20_battery_map_status_voltage(u8 data[3], int *voltage,
+ int *level, int *charge_type)
+{
+ int status;
+
+ long charge_sts = (long)data[2];
+
+ *level = POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN;
+ switch (data[2] & 0xe0) {
+ case 0x00:
+ status = POWER_SUPPLY_STATUS_CHARGING;
+ break;
+ case 0x20:
+ status = POWER_SUPPLY_STATUS_FULL;
+ *level = POWER_SUPPLY_CAPACITY_LEVEL_FULL;
+ break;
+ case 0x40:
+ status = POWER_SUPPLY_STATUS_DISCHARGING;
+ break;
+ case 0xe0:
+ status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ break;
+ default:
+ status = POWER_SUPPLY_STATUS_UNKNOWN;
+ }
+
+ *charge_type = POWER_SUPPLY_CHARGE_TYPE_STANDARD;
+ if (test_bit(3, &charge_sts)) {
+ *charge_type = POWER_SUPPLY_CHARGE_TYPE_FAST;
+ }
+ if (test_bit(4, &charge_sts)) {
+ *charge_type = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+ }
+
+ if (test_bit(5, &charge_sts)) {
+ *level = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
+ }
+
+ *voltage = get_unaligned_be16(data);
+
+ return status;
+}
+
+static int hidpp20_battery_get_battery_voltage(struct hidpp_device *hidpp,
+ u8 feature_index,
+ int *status, int *voltage,
+ int *level, int *charge_type)
+{
+ struct hidpp_report response;
+ int ret;
+ u8 *params = (u8 *)response.fap.params;
+
+ ret = hidpp_send_fap_command_sync(hidpp, feature_index,
+ CMD_BATTERY_VOLTAGE_GET_BATTERY_VOLTAGE,
+ NULL, 0, &response);
+
+ if (ret > 0) {
+ hid_err(hidpp->hid_dev, "%s: received protocol error 0x%02x\n",
+ __func__, ret);
+ return -EPROTO;
+ }
+ if (ret)
+ return ret;
+
+ hidpp->capabilities |= HIDPP_CAPABILITY_BATTERY_VOLTAGE;
+
+ *status = hidpp20_battery_map_status_voltage(params, voltage,
+ level, charge_type);
+
+ return 0;
+}
+
+static int hidpp20_query_battery_voltage_info(struct hidpp_device *hidpp)
+{
+ u8 feature_type;
+ int ret;
+ int status, voltage, level, charge_type;
+
+ if (hidpp->battery.voltage_feature_index == 0xff) {
+ ret = hidpp_root_get_feature(hidpp, HIDPP_PAGE_BATTERY_VOLTAGE,
+ &hidpp->battery.voltage_feature_index,
+ &feature_type);
+ if (ret)
+ return ret;
+ }
+
+ ret = hidpp20_battery_get_battery_voltage(hidpp,
+ hidpp->battery.voltage_feature_index,
+ &status, &voltage, &level, &charge_type);
+
+ if (ret)
+ return ret;
+
+ hidpp->battery.status = status;
+ hidpp->battery.voltage = voltage;
+ hidpp->battery.level = level;
+ hidpp->battery.charge_type = charge_type;
+ hidpp->battery.online = status != POWER_SUPPLY_STATUS_NOT_CHARGING;
+
+ return 0;
+}
+
+static int hidpp20_battery_voltage_event(struct hidpp_device *hidpp,
+ u8 *data, int size)
+{
+ struct hidpp_report *report = (struct hidpp_report *)data;
+ int status, voltage, level, charge_type;
+
+ if (report->fap.feature_index != hidpp->battery.voltage_feature_index ||
+ report->fap.funcindex_clientid != EVENT_BATTERY_VOLTAGE_STATUS_BROADCAST)
+ return 0;
+
+ status = hidpp20_battery_map_status_voltage(report->fap.params, &voltage,
+ &level, &charge_type);
+
+ hidpp->battery.online = status != POWER_SUPPLY_STATUS_NOT_CHARGING;
+
+ if (voltage != hidpp->battery.voltage || status != hidpp->battery.status) {
+ hidpp->battery.voltage = voltage;
+ hidpp->battery.status = status;
+ hidpp->battery.level = level;
+ hidpp->battery.charge_type = charge_type;
+ if (hidpp->battery.ps)
+ power_supply_changed(hidpp->battery.ps);
+ }
+ return 0;
+}
+
static enum power_supply_property hidpp_battery_props[] = {
POWER_SUPPLY_PROP_ONLINE,
POWER_SUPPLY_PROP_STATUS,
@@ -1228,6 +1370,7 @@ static enum power_supply_property hidpp_battery_props[] = {
POWER_SUPPLY_PROP_SERIAL_NUMBER,
0, /* placeholder for POWER_SUPPLY_PROP_CAPACITY, */
0, /* placeholder for POWER_SUPPLY_PROP_CAPACITY_LEVEL, */
+ 0, /* placeholder for POWER_SUPPLY_PROP_VOLTAGE_NOW, */
};
static int hidpp_battery_get_property(struct power_supply *psy,
@@ -1265,6 +1408,13 @@ static int hidpp_battery_get_property(struct power_supply *psy,
case POWER_SUPPLY_PROP_SERIAL_NUMBER:
val->strval = hidpp->hid_dev->uniq;
break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ /* hardware reports voltage in in mV. sysfs expects uV */
+ val->intval = hidpp->battery.voltage * 1000;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ val->intval = hidpp->battery.charge_type;
+ break;
default:
ret = -EINVAL;
break;
@@ -3083,6 +3233,9 @@ static int hidpp_raw_hidpp_event(struct hidpp_device *hidpp, u8 *data,
ret = hidpp_solar_battery_event(hidpp, data, size);
if (ret != 0)
return ret;
+ ret = hidpp20_battery_voltage_event(hidpp, data, size);
+ if (ret != 0)
+ return ret;
}
if (hidpp->capabilities & HIDPP_CAPABILITY_HIDPP10_BATTERY) {
@@ -3204,12 +3357,16 @@ static int hidpp_initialize_battery(struct hidpp_device *hidpp)
hidpp->battery.feature_index = 0xff;
hidpp->battery.solar_feature_index = 0xff;
+ hidpp->battery.voltage_feature_index = 0xff;
if (hidpp->protocol_major >= 2) {
if (hidpp->quirks & HIDPP_QUIRK_CLASS_K750)
ret = hidpp_solar_request_battery_event(hidpp);
- else
- ret = hidpp20_query_battery_info(hidpp);
+ else {
+ ret = hidpp20_query_battery_voltage_info(hidpp);
+ if (ret)
+ ret = hidpp20_query_battery_info(hidpp);
+ }
if (ret)
return ret;
@@ -3234,7 +3391,7 @@ static int hidpp_initialize_battery(struct hidpp_device *hidpp)
if (!battery_props)
return -ENOMEM;
- num_battery_props = ARRAY_SIZE(hidpp_battery_props) - 2;
+ num_battery_props = ARRAY_SIZE(hidpp_battery_props) - 3;
if (hidpp->capabilities & HIDPP_CAPABILITY_BATTERY_MILEAGE)
battery_props[num_battery_props++] =
@@ -3244,6 +3401,10 @@ static int hidpp_initialize_battery(struct hidpp_device *hidpp)
battery_props[num_battery_props++] =
POWER_SUPPLY_PROP_CAPACITY_LEVEL;
+ if (hidpp->capabilities & HIDPP_CAPABILITY_BATTERY_VOLTAGE)
+ battery_props[num_battery_props++] =
+ POWER_SUPPLY_PROP_VOLTAGE_NOW;
+
battery = &hidpp->battery;
n = atomic_inc_return(&battery_no) - 1;
@@ -3407,7 +3568,10 @@ static void hidpp_connect_event(struct hidpp_device *hidpp)
else
hidpp10_query_battery_status(hidpp);
} else if (hidpp->capabilities & HIDPP_CAPABILITY_HIDPP20_BATTERY) {
- hidpp20_query_battery_info(hidpp);
+ if (hidpp->capabilities & HIDPP_CAPABILITY_BATTERY_VOLTAGE)
+ hidpp20_query_battery_voltage_info(hidpp);
+ else
+ hidpp20_query_battery_info(hidpp);
}
if (hidpp->battery.ps)
power_supply_changed(hidpp->battery.ps);
--
2.23.0
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v6] hid-logitech-hidpp: read battery voltage from newer devices
2019-10-26 22:25 [PATCH v6] hid-logitech-hidpp: read battery voltage from newer devices Pedro Vanzella
@ 2019-12-18 15:52 ` Benjamin Tissoires
0 siblings, 0 replies; 2+ messages in thread
From: Benjamin Tissoires @ 2019-12-18 15:52 UTC (permalink / raw)
To: Pedro Vanzella
Cc: open list:HID CORE LAYER, Filipe Laíns, Jiri Kosina, lkml
On Sun, Oct 27, 2019 at 12:26 AM Pedro Vanzella <pedro@pedrovanzella.com> wrote:
>
> Newer Logitech mice report their battery voltage through feature 0x1001
> instead of the battery levels through feature 0x1000.
>
> When the device is brought up and we try to query the battery, figure
> out if it supports the old or the new feature. If it supports the new
> feature, record the feature index and read the battery voltage and
> its charge status. The device will respond with three bytes: the first
> two are its voltage, and the last one is a bitset, reporting if the
> battery is charging, fast or slow, in critical level or discharging.
>
> If everything went correctly, record the fact that we're capable
> of querying battery voltage.
>
> Note that the protocol only gives us the current voltage in mV.
> We store that as-is, but when queried, we report it in uV as
> expected by sysfs.
>
> Like we do for other ways of interacting with the battery for other
> devices, refresh the battery status and notify the power supply
> subsystem of the changes in voltage and status.
>
> Since there are no known devices which implement both the old and the
> new battery feature, we make sure to try the newer feature first and
> only fall back to the old one if that fails.
>
> Signed-off-by: Pedro Vanzella <pedro@pedrovanzella.com>
> ---
Applied to for-5.6/logitech, sorry for the delay.
Cheers,
Benjamin
> drivers/hid/hid-logitech-hidpp.c | 172 ++++++++++++++++++++++++++++++-
> 1 file changed, 168 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c
> index 0179f7ed77e5..959586dab535 100644
> --- a/drivers/hid/hid-logitech-hidpp.c
> +++ b/drivers/hid/hid-logitech-hidpp.c
> @@ -87,6 +87,7 @@ MODULE_PARM_DESC(disable_tap_to_click,
> #define HIDPP_CAPABILITY_HIDPP20_BATTERY BIT(1)
> #define HIDPP_CAPABILITY_BATTERY_MILEAGE BIT(2)
> #define HIDPP_CAPABILITY_BATTERY_LEVEL_STATUS BIT(3)
> +#define HIDPP_CAPABILITY_BATTERY_VOLTAGE BIT(4)
>
> /*
> * There are two hidpp protocols in use, the first version hidpp10 is known
> @@ -135,12 +136,15 @@ struct hidpp_report {
> struct hidpp_battery {
> u8 feature_index;
> u8 solar_feature_index;
> + u8 voltage_feature_index;
> struct power_supply_desc desc;
> struct power_supply *ps;
> char name[64];
> int status;
> int capacity;
> int level;
> + int voltage;
> + int charge_type;
> bool online;
> };
>
> @@ -1219,6 +1223,144 @@ static int hidpp20_battery_event(struct hidpp_device *hidpp,
> return 0;
> }
>
> +/* -------------------------------------------------------------------------- */
> +/* 0x1001: Battery voltage */
> +/* -------------------------------------------------------------------------- */
> +
> +#define HIDPP_PAGE_BATTERY_VOLTAGE 0x1001
> +
> +#define CMD_BATTERY_VOLTAGE_GET_BATTERY_VOLTAGE 0x00
> +
> +#define EVENT_BATTERY_VOLTAGE_STATUS_BROADCAST 0x00
> +
> +static int hidpp20_battery_map_status_voltage(u8 data[3], int *voltage,
> + int *level, int *charge_type)
> +{
> + int status;
> +
> + long charge_sts = (long)data[2];
> +
> + *level = POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN;
> + switch (data[2] & 0xe0) {
> + case 0x00:
> + status = POWER_SUPPLY_STATUS_CHARGING;
> + break;
> + case 0x20:
> + status = POWER_SUPPLY_STATUS_FULL;
> + *level = POWER_SUPPLY_CAPACITY_LEVEL_FULL;
> + break;
> + case 0x40:
> + status = POWER_SUPPLY_STATUS_DISCHARGING;
> + break;
> + case 0xe0:
> + status = POWER_SUPPLY_STATUS_NOT_CHARGING;
> + break;
> + default:
> + status = POWER_SUPPLY_STATUS_UNKNOWN;
> + }
> +
> + *charge_type = POWER_SUPPLY_CHARGE_TYPE_STANDARD;
> + if (test_bit(3, &charge_sts)) {
> + *charge_type = POWER_SUPPLY_CHARGE_TYPE_FAST;
> + }
> + if (test_bit(4, &charge_sts)) {
> + *charge_type = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
> + }
> +
> + if (test_bit(5, &charge_sts)) {
> + *level = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
> + }
> +
> + *voltage = get_unaligned_be16(data);
> +
> + return status;
> +}
> +
> +static int hidpp20_battery_get_battery_voltage(struct hidpp_device *hidpp,
> + u8 feature_index,
> + int *status, int *voltage,
> + int *level, int *charge_type)
> +{
> + struct hidpp_report response;
> + int ret;
> + u8 *params = (u8 *)response.fap.params;
> +
> + ret = hidpp_send_fap_command_sync(hidpp, feature_index,
> + CMD_BATTERY_VOLTAGE_GET_BATTERY_VOLTAGE,
> + NULL, 0, &response);
> +
> + if (ret > 0) {
> + hid_err(hidpp->hid_dev, "%s: received protocol error 0x%02x\n",
> + __func__, ret);
> + return -EPROTO;
> + }
> + if (ret)
> + return ret;
> +
> + hidpp->capabilities |= HIDPP_CAPABILITY_BATTERY_VOLTAGE;
> +
> + *status = hidpp20_battery_map_status_voltage(params, voltage,
> + level, charge_type);
> +
> + return 0;
> +}
> +
> +static int hidpp20_query_battery_voltage_info(struct hidpp_device *hidpp)
> +{
> + u8 feature_type;
> + int ret;
> + int status, voltage, level, charge_type;
> +
> + if (hidpp->battery.voltage_feature_index == 0xff) {
> + ret = hidpp_root_get_feature(hidpp, HIDPP_PAGE_BATTERY_VOLTAGE,
> + &hidpp->battery.voltage_feature_index,
> + &feature_type);
> + if (ret)
> + return ret;
> + }
> +
> + ret = hidpp20_battery_get_battery_voltage(hidpp,
> + hidpp->battery.voltage_feature_index,
> + &status, &voltage, &level, &charge_type);
> +
> + if (ret)
> + return ret;
> +
> + hidpp->battery.status = status;
> + hidpp->battery.voltage = voltage;
> + hidpp->battery.level = level;
> + hidpp->battery.charge_type = charge_type;
> + hidpp->battery.online = status != POWER_SUPPLY_STATUS_NOT_CHARGING;
> +
> + return 0;
> +}
> +
> +static int hidpp20_battery_voltage_event(struct hidpp_device *hidpp,
> + u8 *data, int size)
> +{
> + struct hidpp_report *report = (struct hidpp_report *)data;
> + int status, voltage, level, charge_type;
> +
> + if (report->fap.feature_index != hidpp->battery.voltage_feature_index ||
> + report->fap.funcindex_clientid != EVENT_BATTERY_VOLTAGE_STATUS_BROADCAST)
> + return 0;
> +
> + status = hidpp20_battery_map_status_voltage(report->fap.params, &voltage,
> + &level, &charge_type);
> +
> + hidpp->battery.online = status != POWER_SUPPLY_STATUS_NOT_CHARGING;
> +
> + if (voltage != hidpp->battery.voltage || status != hidpp->battery.status) {
> + hidpp->battery.voltage = voltage;
> + hidpp->battery.status = status;
> + hidpp->battery.level = level;
> + hidpp->battery.charge_type = charge_type;
> + if (hidpp->battery.ps)
> + power_supply_changed(hidpp->battery.ps);
> + }
> + return 0;
> +}
> +
> static enum power_supply_property hidpp_battery_props[] = {
> POWER_SUPPLY_PROP_ONLINE,
> POWER_SUPPLY_PROP_STATUS,
> @@ -1228,6 +1370,7 @@ static enum power_supply_property hidpp_battery_props[] = {
> POWER_SUPPLY_PROP_SERIAL_NUMBER,
> 0, /* placeholder for POWER_SUPPLY_PROP_CAPACITY, */
> 0, /* placeholder for POWER_SUPPLY_PROP_CAPACITY_LEVEL, */
> + 0, /* placeholder for POWER_SUPPLY_PROP_VOLTAGE_NOW, */
> };
>
> static int hidpp_battery_get_property(struct power_supply *psy,
> @@ -1265,6 +1408,13 @@ static int hidpp_battery_get_property(struct power_supply *psy,
> case POWER_SUPPLY_PROP_SERIAL_NUMBER:
> val->strval = hidpp->hid_dev->uniq;
> break;
> + case POWER_SUPPLY_PROP_VOLTAGE_NOW:
> + /* hardware reports voltage in in mV. sysfs expects uV */
> + val->intval = hidpp->battery.voltage * 1000;
> + break;
> + case POWER_SUPPLY_PROP_CHARGE_TYPE:
> + val->intval = hidpp->battery.charge_type;
> + break;
> default:
> ret = -EINVAL;
> break;
> @@ -3083,6 +3233,9 @@ static int hidpp_raw_hidpp_event(struct hidpp_device *hidpp, u8 *data,
> ret = hidpp_solar_battery_event(hidpp, data, size);
> if (ret != 0)
> return ret;
> + ret = hidpp20_battery_voltage_event(hidpp, data, size);
> + if (ret != 0)
> + return ret;
> }
>
> if (hidpp->capabilities & HIDPP_CAPABILITY_HIDPP10_BATTERY) {
> @@ -3204,12 +3357,16 @@ static int hidpp_initialize_battery(struct hidpp_device *hidpp)
>
> hidpp->battery.feature_index = 0xff;
> hidpp->battery.solar_feature_index = 0xff;
> + hidpp->battery.voltage_feature_index = 0xff;
>
> if (hidpp->protocol_major >= 2) {
> if (hidpp->quirks & HIDPP_QUIRK_CLASS_K750)
> ret = hidpp_solar_request_battery_event(hidpp);
> - else
> - ret = hidpp20_query_battery_info(hidpp);
> + else {
> + ret = hidpp20_query_battery_voltage_info(hidpp);
> + if (ret)
> + ret = hidpp20_query_battery_info(hidpp);
> + }
>
> if (ret)
> return ret;
> @@ -3234,7 +3391,7 @@ static int hidpp_initialize_battery(struct hidpp_device *hidpp)
> if (!battery_props)
> return -ENOMEM;
>
> - num_battery_props = ARRAY_SIZE(hidpp_battery_props) - 2;
> + num_battery_props = ARRAY_SIZE(hidpp_battery_props) - 3;
>
> if (hidpp->capabilities & HIDPP_CAPABILITY_BATTERY_MILEAGE)
> battery_props[num_battery_props++] =
> @@ -3244,6 +3401,10 @@ static int hidpp_initialize_battery(struct hidpp_device *hidpp)
> battery_props[num_battery_props++] =
> POWER_SUPPLY_PROP_CAPACITY_LEVEL;
>
> + if (hidpp->capabilities & HIDPP_CAPABILITY_BATTERY_VOLTAGE)
> + battery_props[num_battery_props++] =
> + POWER_SUPPLY_PROP_VOLTAGE_NOW;
> +
> battery = &hidpp->battery;
>
> n = atomic_inc_return(&battery_no) - 1;
> @@ -3407,7 +3568,10 @@ static void hidpp_connect_event(struct hidpp_device *hidpp)
> else
> hidpp10_query_battery_status(hidpp);
> } else if (hidpp->capabilities & HIDPP_CAPABILITY_HIDPP20_BATTERY) {
> - hidpp20_query_battery_info(hidpp);
> + if (hidpp->capabilities & HIDPP_CAPABILITY_BATTERY_VOLTAGE)
> + hidpp20_query_battery_voltage_info(hidpp);
> + else
> + hidpp20_query_battery_info(hidpp);
> }
> if (hidpp->battery.ps)
> power_supply_changed(hidpp->battery.ps);
> --
> 2.23.0
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-12-18 15:52 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-10-26 22:25 [PATCH v6] hid-logitech-hidpp: read battery voltage from newer devices Pedro Vanzella
2019-12-18 15:52 ` Benjamin Tissoires
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).