* [PATCH] ARM: dts: vf610: Add ZII CFU1 board
@ 2018-07-19 0:59 Andrey Smirnov
2018-07-19 3:43 ` Chris Healy
2018-07-19 12:45 ` Fabio Estevam
0 siblings, 2 replies; 5+ messages in thread
From: Andrey Smirnov @ 2018-07-19 0:59 UTC (permalink / raw)
To: Shawn Guo
Cc: Andrey Smirnov, Fabio Estevam, cphealy, linux-arm-kernel,
devicetree, linux-kernel, Andrew Lunn
Add support for the Zodiac Inflight Innovations CFU1
board (VF610-based).
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: cphealy@gmail.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
Shawn:
Currently this patch is rebase on top of [spu3], if that is
problematic, let me know and I'll update it accordingly
Thanks,
Andrey Smirnov
[spu3] lkml.kernel.org/r/20180717040651.641-1-andrew.smirnov@gmail.com
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/vf610-zii-cfu1.dts | 307 +++++++++++++++++++++++++++
2 files changed, 308 insertions(+)
create mode 100644 arch/arm/boot/dts/vf610-zii-cfu1.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index e331b2c16539..85797819fdd9 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -569,6 +569,7 @@ dtb-$(CONFIG_SOC_VF610) += \
vf610-cosmic.dtb \
vf610m4-cosmic.dtb \
vf610-twr.dtb \
+ vf610-zii-cfu1.dtb \
vf610-zii-dev-rev-b.dtb \
vf610-zii-dev-rev-c.dtb \
vf610-zii-ssmb-spu3.dtb
diff --git a/arch/arm/boot/dts/vf610-zii-cfu1.dts b/arch/arm/boot/dts/vf610-zii-cfu1.dts
new file mode 100644
index 000000000000..d4f48c48131c
--- /dev/null
+++ b/arch/arm/boot/dts/vf610-zii-cfu1.dts
@@ -0,0 +1,307 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/*
+ * Copyright (C) 2018 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+ model = "ZII VF610 CFU1 Board";
+ compatible = "zii,vf610cfu1", "zii,vf610dev", "fsl,vf610";
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ memory {
+ reg = <0x80000000 0x20000000>;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pinctrl_leds_debug>;
+ pinctrl-names = "default";
+
+ led-debug {
+ label = "zii:green:debug1";
+ gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ max-brightness = <1>;
+ };
+
+ led-fail {
+ label = "zii:red:fail";
+ gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ max-brightness = <1>;
+ };
+
+ led-status {
+ label = "zii:green:status";
+ gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ max-brightness = <1>;
+ };
+
+ led-debug-a {
+ label = "zii:green:debug_a";
+ gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ max-brightness = <1>;
+ };
+
+ led-debug-b {
+ label = "zii:green:debug_b";
+ gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ max-brightness = <1>;
+ };
+ };
+
+ reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_3v3_mcu";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&adc0 {
+ vref-supply = <®_vcc_3v3_mcu>;
+ status = "okay";
+};
+
+&adc1 {
+ vref-supply = <®_vcc_3v3_mcu>;
+ status = "okay";
+};
+
+&dspi1 {
+ bus-num = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dspi1>;
+ status = "okay";
+
+ m25p128@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "m25p128", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ partition@0 {
+ label = "m25p128-0";
+ reg = <0x0 0x01000000>;
+ };
+ };
+};
+
+&edma0 {
+ status = "okay";
+};
+
+&edma1 {
+ status = "okay";
+};
+
+&esdhc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc0>;
+ bus-width = <8>;
+ non-removable;
+ no-1-8-v;
+ keep-power-in-suspend;
+ status = "okay";
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&fec1 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ status = "okay";
+
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+
+ mdio1: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ switch0: switch0@0 {
+ compatible = "marvell,mv88e6085";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_switch>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ eeprom-length = <512>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "eth_cu_1000_1";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "eth_cu_1000_2";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "eth_cu_1000_3";
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&fec1>;
+
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+ };
+ };
+ };
+ };
+};
+
+&i2c0 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ status = "okay";
+
+ pca9554@22 {
+ compatible = "nxp,pca9554";
+ reg = <0x22>;
+ gpio-controller;
+ };
+
+ lm75@48 {
+ compatible = "national,lm75";
+ reg = <0x48>;
+ };
+
+ at24c04@52 {
+ compatible = "atmel,24c04";
+ reg = <0x52>;
+ label = "nvm";
+ };
+
+ at24c04@54 {
+ compatible = "atmel,24c04";
+ reg = <0x54>;
+ label = "nameplate";
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_dspi1: dspi1grp {
+ fsl,pins = <
+ VF610_PAD_PTD5__DSPI1_CS0 0x1182
+ VF610_PAD_PTC6__DSPI1_SIN 0x1181
+ VF610_PAD_PTC7__DSPI1_SOUT 0x1182
+ VF610_PAD_PTC8__DSPI1_SCK 0x1182
+ >;
+ };
+
+ pinctrl_esdhc0: esdhc0grp {
+ fsl,pins = <
+ VF610_PAD_PTC0__ESDHC0_CLK 0x31ef
+ VF610_PAD_PTC1__ESDHC0_CMD 0x31ef
+ VF610_PAD_PTC2__ESDHC0_DAT0 0x31ef
+ VF610_PAD_PTC3__ESDHC0_DAT1 0x31ef
+ VF610_PAD_PTC4__ESDHC0_DAT2 0x31ef
+ VF610_PAD_PTC5__ESDHC0_DAT3 0x31ef
+ VF610_PAD_PTD23__ESDHC0_DAT4 0x31ef
+ VF610_PAD_PTD22__ESDHC0_DAT5 0x31ef
+ VF610_PAD_PTD21__ESDHC0_DAT6 0x31ef
+ VF610_PAD_PTD20__ESDHC0_DAT7 0x31ef
+ >;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
+ VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
+ VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
+ VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
+ VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
+ VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
+ >;
+ };
+
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ VF610_PAD_PTA6__RMII_CLKIN 0x30d1
+ VF610_PAD_PTC9__ENET_RMII1_MDC 0x30fe
+ VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
+ VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
+ VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1
+ VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
+ VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
+ VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
+ VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
+ VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
+ >;
+ };
+
+ pinctrl_i2c0: i2c0grp {
+ fsl,pins = <
+ VF610_PAD_PTB14__I2C0_SCL 0x37ff
+ VF610_PAD_PTB15__I2C0_SDA 0x37ff
+ >;
+ };
+
+ pinctrl_leds_debug: pinctrl-leds-debug {
+ fsl,pins = <
+ VF610_PAD_PTD3__GPIO_82 0x31c2
+ VF610_PAD_PTE3__GPIO_108 0x31c2
+ VF610_PAD_PTE4__GPIO_109 0x31c2
+ VF610_PAD_PTE5__GPIO_110 0x31c2
+ VF610_PAD_PTE6__GPIO_111 0x31c2
+ >;
+ };
+
+ pinctrl_switch: switch-grp {
+ fsl,pins = <
+ VF610_PAD_PTB28__GPIO_98 0x3061
+ VF610_PAD_PTE2__GPIO_107 0x1042
+ >;
+ };
+
+ pinctrl_uart0: uart0grp {
+ fsl,pins = <
+ VF610_PAD_PTB10__UART0_TX 0x21a2
+ VF610_PAD_PTB11__UART0_RX 0x21a1
+ >;
+ };
+};
--
2.17.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH] ARM: dts: vf610: Add ZII CFU1 board
2018-07-19 0:59 [PATCH] ARM: dts: vf610: Add ZII CFU1 board Andrey Smirnov
@ 2018-07-19 3:43 ` Chris Healy
2018-07-19 12:45 ` Fabio Estevam
1 sibling, 0 replies; 5+ messages in thread
From: Chris Healy @ 2018-07-19 3:43 UTC (permalink / raw)
To: Andrey Smirnov
Cc: Shawn Guo, Fabio Estevam, linux ARM, devicetree, linux-kernel,
Andrew Lunn
> Add support for the Zodiac Inflight Innovations CFU1
> board (VF610-based).
>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: Fabio Estevam <fabio.estevam@nxp.com>
> Cc: cphealy@gmail.com
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: devicetree@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> ---
>
> Shawn:
>
> Currently this patch is rebase on top of [spu3], if that is
> problematic, let me know and I'll update it accordingly
>
> Thanks,
> Andrey Smirnov
>
> [spu3] lkml.kernel.org/r/20180717040651.641-1-andrew.smirnov@gmail.com
>
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/vf610-zii-cfu1.dts | 307 +++++++++++++++++++++++++++
> 2 files changed, 308 insertions(+)
> create mode 100644 arch/arm/boot/dts/vf610-zii-cfu1.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index e331b2c16539..85797819fdd9 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -569,6 +569,7 @@ dtb-$(CONFIG_SOC_VF610) += \
> vf610-cosmic.dtb \
> vf610m4-cosmic.dtb \
> vf610-twr.dtb \
> + vf610-zii-cfu1.dtb \
> vf610-zii-dev-rev-b.dtb \
Tested-by: Chris Healy <cphealy@gmail.com>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] ARM: dts: vf610: Add ZII CFU1 board
2018-07-19 0:59 [PATCH] ARM: dts: vf610: Add ZII CFU1 board Andrey Smirnov
2018-07-19 3:43 ` Chris Healy
@ 2018-07-19 12:45 ` Fabio Estevam
2018-07-19 19:07 ` Andrey Smirnov
1 sibling, 1 reply; 5+ messages in thread
From: Fabio Estevam @ 2018-07-19 12:45 UTC (permalink / raw)
To: Andrey Smirnov
Cc: Shawn Guo,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
Andrew Lunn, linux-kernel, Chris Healy, Fabio Estevam,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
Hi Andrey,
On Wed, Jul 18, 2018 at 9:59 PM, Andrey Smirnov
<andrew.smirnov@gmail.com> wrote:
> +/ {
> + model = "ZII VF610 CFU1 Board";
> + compatible = "zii,vf610cfu1", "zii,vf610dev", "fsl,vf610";
> +
> + chosen {
> + stdout-path = &uart0;
> + };
> +
> + memory {
memory@80000000 to avoid dtc warnings with W=1, please.
Please make sure that this patch does not introduce any W=1 warning.
With this fixed:
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] ARM: dts: vf610: Add ZII CFU1 board
2018-07-19 12:45 ` Fabio Estevam
@ 2018-07-19 19:07 ` Andrey Smirnov
2018-07-19 19:38 ` Fabio Estevam
0 siblings, 1 reply; 5+ messages in thread
From: Andrey Smirnov @ 2018-07-19 19:07 UTC (permalink / raw)
To: Fabio Estevam
Cc: Shawn Guo,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
Andrew Lunn, linux-kernel, Chris Healy, Fabio Estevam,
linux-arm-kernel
On Thu, Jul 19, 2018 at 5:45 AM Fabio Estevam <festevam@gmail.com> wrote:
>
> Hi Andrey,
>
> On Wed, Jul 18, 2018 at 9:59 PM, Andrey Smirnov
> <andrew.smirnov@gmail.com> wrote:
>
> > +/ {
> > + model = "ZII VF610 CFU1 Board";
> > + compatible = "zii,vf610cfu1", "zii,vf610dev", "fsl,vf610";
> > +
> > + chosen {
> > + stdout-path = &uart0;
> > + };
> > +
> > + memory {
>
> memory@80000000 to avoid dtc warnings with W=1, please.
>
> Please make sure that this patch does not introduce any W=1 warning.
>
I foolishly assumed building it with W=2 would reveal W=1 level
problems as well, but apparently not. Will fix in v2. Same problems
were missed in SPU3 patch that just went it. I'll send fixes for that
one as well.
Thanks,
Andrey Smirnov
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] ARM: dts: vf610: Add ZII CFU1 board
2018-07-19 19:07 ` Andrey Smirnov
@ 2018-07-19 19:38 ` Fabio Estevam
0 siblings, 0 replies; 5+ messages in thread
From: Fabio Estevam @ 2018-07-19 19:38 UTC (permalink / raw)
To: Andrey Smirnov
Cc: Shawn Guo,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
Andrew Lunn, linux-kernel, Chris Healy, Fabio Estevam,
linux-arm-kernel
Hi Andrey,
On Thu, Jul 19, 2018 at 4:07 PM, Andrey Smirnov
<andrew.smirnov@gmail.com> wrote:
> I foolishly assumed building it with W=2 would reveal W=1 level
> problems as well, but apparently not. Will fix in v2. Same problems
You can also use W=12
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2018-07-19 19:38 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-07-19 0:59 [PATCH] ARM: dts: vf610: Add ZII CFU1 board Andrey Smirnov
2018-07-19 3:43 ` Chris Healy
2018-07-19 12:45 ` Fabio Estevam
2018-07-19 19:07 ` Andrey Smirnov
2018-07-19 19:38 ` Fabio Estevam
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).