* [PATCH V2 1/4] thermal: qoriq: Use devm_platform_ioremap_resource() instead of of_iomap()
@ 2019-07-29 8:39 Anson.Huang
2019-07-29 8:39 ` [PATCH V2 2/4] thermal: qoriq: Use __maybe_unused instead of #if CONFIG_PM_SLEEP Anson.Huang
` (2 more replies)
0 siblings, 3 replies; 8+ messages in thread
From: Anson.Huang @ 2019-07-29 8:39 UTC (permalink / raw)
To: rui.zhang, edubezval, daniel.lezcano, robh+dt, mark.rutland,
linux-pm, devicetree, linux-kernel
Cc: Linux-imx
From: Anson Huang <Anson.Huang@nxp.com>
Use devm_platform_ioremap_resource() instead of of_iomap() to
save the iounmap() call in error handle path;
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
No changes.
---
drivers/thermal/qoriq_thermal.c | 18 ++++++------------
1 file changed, 6 insertions(+), 12 deletions(-)
diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c
index 7b36493..c7c7de2 100644
--- a/drivers/thermal/qoriq_thermal.c
+++ b/drivers/thermal/qoriq_thermal.c
@@ -202,32 +202,27 @@ static int qoriq_tmu_probe(struct platform_device *pdev)
data->little_endian = of_property_read_bool(np, "little-endian");
- data->regs = of_iomap(np, 0);
- if (!data->regs) {
+ data->regs = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(data->regs)) {
dev_err(&pdev->dev, "Failed to get memory region\n");
- ret = -ENODEV;
- goto err_iomap;
+ return PTR_ERR(data->regs);
}
qoriq_tmu_init_device(data); /* TMU initialization */
ret = qoriq_tmu_calibration(pdev); /* TMU calibration */
if (ret < 0)
- goto err_tmu;
+ goto err;
ret = qoriq_tmu_register_tmu_zone(pdev);
if (ret < 0) {
dev_err(&pdev->dev, "Failed to register sensors\n");
- ret = -ENODEV;
- goto err_iomap;
+ goto err;
}
return 0;
-err_tmu:
- iounmap(data->regs);
-
-err_iomap:
+err:
platform_set_drvdata(pdev, NULL);
return ret;
@@ -240,7 +235,6 @@ static int qoriq_tmu_remove(struct platform_device *pdev)
/* Disable monitoring */
tmu_write(data, TMR_DISABLE, &data->regs->tmr);
- iounmap(data->regs);
platform_set_drvdata(pdev, NULL);
return 0;
--
2.7.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH V2 2/4] thermal: qoriq: Use __maybe_unused instead of #if CONFIG_PM_SLEEP
2019-07-29 8:39 [PATCH V2 1/4] thermal: qoriq: Use devm_platform_ioremap_resource() instead of of_iomap() Anson.Huang
@ 2019-07-29 8:39 ` Anson.Huang
2019-07-29 8:39 ` [PATCH V2 3/4] dt-bindings: thermal: qoriq: Add optional clocks property Anson.Huang
2019-07-29 8:39 ` [PATCH V2 4/4] thermal: qoriq: Add clock operations Anson.Huang
2 siblings, 0 replies; 8+ messages in thread
From: Anson.Huang @ 2019-07-29 8:39 UTC (permalink / raw)
To: rui.zhang, edubezval, daniel.lezcano, robh+dt, mark.rutland,
linux-pm, devicetree, linux-kernel
Cc: Linux-imx
From: Anson Huang <Anson.Huang@nxp.com>
Use __maybe_unused for power management related functions
instead of #if CONFIG_PM_SLEEP to simply the code.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
No changes.
---
drivers/thermal/qoriq_thermal.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c
index c7c7de2..2b2f79b 100644
--- a/drivers/thermal/qoriq_thermal.c
+++ b/drivers/thermal/qoriq_thermal.c
@@ -240,8 +240,7 @@ static int qoriq_tmu_remove(struct platform_device *pdev)
return 0;
}
-#ifdef CONFIG_PM_SLEEP
-static int qoriq_tmu_suspend(struct device *dev)
+static int __maybe_unused qoriq_tmu_suspend(struct device *dev)
{
u32 tmr;
struct qoriq_tmu_data *data = dev_get_drvdata(dev);
@@ -254,7 +253,7 @@ static int qoriq_tmu_suspend(struct device *dev)
return 0;
}
-static int qoriq_tmu_resume(struct device *dev)
+static int __maybe_unused qoriq_tmu_resume(struct device *dev)
{
u32 tmr;
struct qoriq_tmu_data *data = dev_get_drvdata(dev);
@@ -266,7 +265,6 @@ static int qoriq_tmu_resume(struct device *dev)
return 0;
}
-#endif
static SIMPLE_DEV_PM_OPS(qoriq_tmu_pm_ops,
qoriq_tmu_suspend, qoriq_tmu_resume);
--
2.7.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH V2 3/4] dt-bindings: thermal: qoriq: Add optional clocks property
2019-07-29 8:39 [PATCH V2 1/4] thermal: qoriq: Use devm_platform_ioremap_resource() instead of of_iomap() Anson.Huang
2019-07-29 8:39 ` [PATCH V2 2/4] thermal: qoriq: Use __maybe_unused instead of #if CONFIG_PM_SLEEP Anson.Huang
@ 2019-07-29 8:39 ` Anson.Huang
2019-07-29 12:21 ` Fabio Estevam
2019-07-29 12:31 ` Daniel Baluta
2019-07-29 8:39 ` [PATCH V2 4/4] thermal: qoriq: Add clock operations Anson.Huang
2 siblings, 2 replies; 8+ messages in thread
From: Anson.Huang @ 2019-07-29 8:39 UTC (permalink / raw)
To: rui.zhang, edubezval, daniel.lezcano, robh+dt, mark.rutland,
linux-pm, devicetree, linux-kernel
Cc: Linux-imx
From: Anson Huang <Anson.Huang@nxp.com>
Some platforms have clock control for TMU, add optional
clocks property to the binding doc.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
No changes.
---
Documentation/devicetree/bindings/thermal/qoriq-thermal.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
index 04cbb90..28f2cba 100644
--- a/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
@@ -23,6 +23,7 @@ Required properties:
Optional property:
- little-endian : If present, the TMU registers are little endian. If absent,
the default is big endian.
+- clocks : the clock for clocking the TMU silicon.
Example:
--
2.7.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH V2 4/4] thermal: qoriq: Add clock operations
2019-07-29 8:39 [PATCH V2 1/4] thermal: qoriq: Use devm_platform_ioremap_resource() instead of of_iomap() Anson.Huang
2019-07-29 8:39 ` [PATCH V2 2/4] thermal: qoriq: Use __maybe_unused instead of #if CONFIG_PM_SLEEP Anson.Huang
2019-07-29 8:39 ` [PATCH V2 3/4] dt-bindings: thermal: qoriq: Add optional clocks property Anson.Huang
@ 2019-07-29 8:39 ` Anson.Huang
2019-07-29 12:30 ` Fabio Estevam
2 siblings, 1 reply; 8+ messages in thread
From: Anson.Huang @ 2019-07-29 8:39 UTC (permalink / raw)
To: rui.zhang, edubezval, daniel.lezcano, robh+dt, mark.rutland,
linux-pm, devicetree, linux-kernel
Cc: Linux-imx
From: Anson Huang <Anson.Huang@nxp.com>
Some platforms like i.MX8MQ has clock control for this module,
need to add clock operations to make sure the driver is working
properly.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
---
Changes since V1:
- use devm_clk_get_optional() instead of devm_clk_get().
---
drivers/thermal/qoriq_thermal.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c
index 2b2f79b..0ae45c0 100644
--- a/drivers/thermal/qoriq_thermal.c
+++ b/drivers/thermal/qoriq_thermal.c
@@ -2,6 +2,7 @@
//
// Copyright 2016 Freescale Semiconductor, Inc.
+#include <linux/clk.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/err.h>
@@ -72,6 +73,7 @@ struct qoriq_sensor {
struct qoriq_tmu_data {
struct qoriq_tmu_regs __iomem *regs;
+ struct clk *clk;
bool little_endian;
struct qoriq_sensor *sensor[SITES_MAX];
};
@@ -208,6 +210,16 @@ static int qoriq_tmu_probe(struct platform_device *pdev)
return PTR_ERR(data->regs);
}
+ data->clk = devm_clk_get_optional(&pdev->dev, NULL);
+ if (IS_ERR(data->clk))
+ return PTR_ERR(data->clk);
+
+ ret = clk_prepare_enable(data->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to enable clock\n");
+ return ret;
+ }
+
qoriq_tmu_init_device(data); /* TMU initialization */
ret = qoriq_tmu_calibration(pdev); /* TMU calibration */
@@ -235,6 +247,8 @@ static int qoriq_tmu_remove(struct platform_device *pdev)
/* Disable monitoring */
tmu_write(data, TMR_DISABLE, &data->regs->tmr);
+ clk_disable_unprepare(data->clk);
+
platform_set_drvdata(pdev, NULL);
return 0;
@@ -250,14 +264,21 @@ static int __maybe_unused qoriq_tmu_suspend(struct device *dev)
tmr &= ~TMR_ME;
tmu_write(data, tmr, &data->regs->tmr);
+ clk_disable_unprepare(data->clk);
+
return 0;
}
static int __maybe_unused qoriq_tmu_resume(struct device *dev)
{
u32 tmr;
+ int ret;
struct qoriq_tmu_data *data = dev_get_drvdata(dev);
+ ret = clk_prepare_enable(data->clk);
+ if (ret)
+ return ret;
+
/* Enable monitoring */
tmr = tmu_read(data, &data->regs->tmr);
tmr |= TMR_ME;
--
2.7.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH V2 3/4] dt-bindings: thermal: qoriq: Add optional clocks property
2019-07-29 8:39 ` [PATCH V2 3/4] dt-bindings: thermal: qoriq: Add optional clocks property Anson.Huang
@ 2019-07-29 12:21 ` Fabio Estevam
2019-07-29 12:31 ` Daniel Baluta
1 sibling, 0 replies; 8+ messages in thread
From: Fabio Estevam @ 2019-07-29 12:21 UTC (permalink / raw)
To: Yongcai Huang
Cc: rui.zhang, Eduardo Valentin, Daniel Lezcano, Rob Herring,
Mark Rutland, linux-pm,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-kernel, NXP Linux Team
Hi Anson,
On Mon, Jul 29, 2019 at 6:04 AM <Anson.Huang@nxp.com> wrote:
>
> From: Anson Huang <Anson.Huang@nxp.com>
>
> Some platforms have clock control for TMU, add optional
> clocks property to the binding doc.
Please add a note that this is needed for i.MX8M.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH V2 4/4] thermal: qoriq: Add clock operations
2019-07-29 8:39 ` [PATCH V2 4/4] thermal: qoriq: Add clock operations Anson.Huang
@ 2019-07-29 12:30 ` Fabio Estevam
[not found] ` <DB3PR0402MB39161F938C25012015B9739CF5DC0@DB3PR0402MB3916.eurprd04.prod.outlook.com>
0 siblings, 1 reply; 8+ messages in thread
From: Fabio Estevam @ 2019-07-29 12:30 UTC (permalink / raw)
To: Yongcai Huang
Cc: rui.zhang, Eduardo Valentin, Daniel Lezcano, Rob Herring,
Mark Rutland, linux-pm,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-kernel, NXP Linux Team
Hi Anson,
On Mon, Jul 29, 2019 at 6:04 AM <Anson.Huang@nxp.com> wrote:
>
> From: Anson Huang <Anson.Huang@nxp.com>
>
> Some platforms like i.MX8MQ has clock control for this module,
> need to add clock operations to make sure the driver is working
> properly.
I haven't seen this series earlier, and I have sent a similar patch
for Guido to test.
Since this patch solves a hang problem, I would suggest that this one
becomes the first of the series.
Also, the "clk: imx8mq: Remove CLK_IS_CRITICAL flag for
IMX8MQ_CLK_TMU_ROOT" should only be applied after this one in order to
avoid the hang.
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> Reviewed-by: Guido Günther <agx@sigxcpu.org>
> ---
> Changes since V1:
> - use devm_clk_get_optional() instead of devm_clk_get().
> ---
> drivers/thermal/qoriq_thermal.c | 21 +++++++++++++++++++++
> 1 file changed, 21 insertions(+)
>
> diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c
> index 2b2f79b..0ae45c0 100644
> --- a/drivers/thermal/qoriq_thermal.c
> +++ b/drivers/thermal/qoriq_thermal.c
> @@ -2,6 +2,7 @@
> //
> // Copyright 2016 Freescale Semiconductor, Inc.
>
> +#include <linux/clk.h>
> #include <linux/module.h>
> #include <linux/platform_device.h>
> #include <linux/err.h>
> @@ -72,6 +73,7 @@ struct qoriq_sensor {
>
> struct qoriq_tmu_data {
> struct qoriq_tmu_regs __iomem *regs;
> + struct clk *clk;
> bool little_endian;
> struct qoriq_sensor *sensor[SITES_MAX];
> };
> @@ -208,6 +210,16 @@ static int qoriq_tmu_probe(struct platform_device *pdev)
> return PTR_ERR(data->regs);
> }
>
> + data->clk = devm_clk_get_optional(&pdev->dev, NULL);
> + if (IS_ERR(data->clk))
> + return PTR_ERR(data->clk);
> +
> + ret = clk_prepare_enable(data->clk);
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to enable clock\n");
> + return ret;
> + }
> +
> qoriq_tmu_init_device(data); /* TMU initialization */
>
> ret = qoriq_tmu_calibration(pdev); /* TMU calibration */
In case of failure the TMU clock should be disabled in the error path.
Thanks
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH V2 3/4] dt-bindings: thermal: qoriq: Add optional clocks property
2019-07-29 8:39 ` [PATCH V2 3/4] dt-bindings: thermal: qoriq: Add optional clocks property Anson.Huang
2019-07-29 12:21 ` Fabio Estevam
@ 2019-07-29 12:31 ` Daniel Baluta
1 sibling, 0 replies; 8+ messages in thread
From: Daniel Baluta @ 2019-07-29 12:31 UTC (permalink / raw)
To: linux-kernel, robh+dt, rui.zhang, edubezval, devicetree,
linux-pm, daniel.lezcano, mark.rutland, Anson Huang
Cc: dl-linux-imx
On Mon, 2019-07-29 at 16:39 +0800, Anson.Huang@nxp.com wrote:
> From: Anson Huang <Anson.Huang@nxp.com>
>
> Some platforms have clock control for TMU, add optional
> clocks property to the binding doc.
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Please also pick Rob's Reviewed-by from last revision.
> ---
> No changes.
> ---
> Documentation/devicetree/bindings/thermal/qoriq-thermal.txt | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/thermal/qoriq-
> thermal.txt b/Documentation/devicetree/bindings/thermal/qoriq-
> thermal.txt
> index 04cbb90..28f2cba 100644
> --- a/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
> +++ b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
> @@ -23,6 +23,7 @@ Required properties:
> Optional property:
> - little-endian : If present, the TMU registers are little endian.
> If absent,
> the default is big endian.
> +- clocks : the clock for clocking the TMU silicon.
>
> Example:
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH V2 4/4] thermal: qoriq: Add clock operations
[not found] ` <DB3PR0402MB39161F938C25012015B9739CF5DC0@DB3PR0402MB3916.eurprd04.prod.outlook.com>
@ 2019-07-30 3:56 ` Fabio Estevam
0 siblings, 0 replies; 8+ messages in thread
From: Fabio Estevam @ 2019-07-30 3:56 UTC (permalink / raw)
To: Anson Huang
Cc: rui.zhang, Eduardo Valentin, Daniel Lezcano, Rob Herring,
Mark Rutland, linux-pm,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-kernel, dl-linux-imx
Hi Anson,
On Tue, Jul 30, 2019 at 12:00 AM Anson Huang <anson.huang@nxp.com> wrote:
> Shawn already applied the patch, and Abel has the AHB clock patch to fix that,
> so just wait for the AHB clock patch in instead of revert the TMU clock patch?
Sorry, I don't understand Abel's patch as there is not a proper
description of what it tries to fix.
If I understand correctly Abel's patch is not the proper fix and the
real fix for the kernel TMU hang in linux-next is to manage the TMU
clock inside the TMU driver, like you did in this patch.
To avoid a revert one possible solution would be to send only this one
as a fix for 5.3. You can point that it Fixes the commit that adds
i.MX8M support for the TMU driver.
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2019-07-30 3:56 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-29 8:39 [PATCH V2 1/4] thermal: qoriq: Use devm_platform_ioremap_resource() instead of of_iomap() Anson.Huang
2019-07-29 8:39 ` [PATCH V2 2/4] thermal: qoriq: Use __maybe_unused instead of #if CONFIG_PM_SLEEP Anson.Huang
2019-07-29 8:39 ` [PATCH V2 3/4] dt-bindings: thermal: qoriq: Add optional clocks property Anson.Huang
2019-07-29 12:21 ` Fabio Estevam
2019-07-29 12:31 ` Daniel Baluta
2019-07-29 8:39 ` [PATCH V2 4/4] thermal: qoriq: Add clock operations Anson.Huang
2019-07-29 12:30 ` Fabio Estevam
[not found] ` <DB3PR0402MB39161F938C25012015B9739CF5DC0@DB3PR0402MB3916.eurprd04.prod.outlook.com>
2019-07-30 3:56 ` Fabio Estevam
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).