From: Atish Patra <atishp@atishpatra.org>
To: Anup Patel <anup@brainfault.org>
Cc: Atish Patra <atish.patra@wdc.com>,
devicetree@vger.kernel.org, Albert Ou <aou@eecs.berkeley.edu>,
Cyril.Jean@microchip.com,
Daire McNamara <daire.mcnamara@microchip.com>,
Anup Patel <anup.patel@wdc.com>,
"linux-kernel@vger.kernel.org List"
<linux-kernel@vger.kernel.org>, Rob Herring <robh+dt@kernel.org>,
Alistair Francis <alistair.francis@wdc.com>,
Paul Walmsley <paul.walmsley@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
linux-riscv <linux-riscv@lists.infradead.org>,
Padmarao Begari <padmarao.begari@microchip.com>
Subject: Re: [RFC PATCH 2/3] RISC-V: Initial DTS for Microchip ICICLE board
Date: Fri, 30 Oct 2020 13:27:25 -0700 [thread overview]
Message-ID: <CAOnJCUKCbkZVGX5Rjputs9QQAHCvH6Fikt7kVGsyCkNjbdMv=Q@mail.gmail.com> (raw)
In-Reply-To: <CAAhSdy0pW8AFCDtFkEO_4zjg8Exp+XTb09AjhErdX9u-Jw3OuQ@mail.gmail.com>
On Fri, Oct 30, 2020 at 2:05 AM Anup Patel <anup@brainfault.org> wrote:
>
> On Thu, Oct 29, 2020 at 4:58 AM Atish Patra <atish.patra@wdc.com> wrote:
> >
> > Add initial DTS for Microchip ICICLE board having only
> > essential devcies (clocks, sdhci, ethernet, serial, etc).
> >
> > Signed-off-by: Atish Patra <atish.patra@wdc.com>
> > ---
> > arch/riscv/boot/dts/Makefile | 1 +
> > arch/riscv/boot/dts/microchip/Makefile | 2 +
> > .../microchip/microchip-icicle-kit-a000.dts | 313 ++++++++++++++++++
>
> I suggest we split this DTS into two parts:
> 1. SOC (microchip-polarfire.dtsi)
> 2. Board (microchip-icicle-kit-a000.dts)
>
> This will be much cleaner and aligned with what is done
> on other architectures.
>
Sure. I will do that in v2.
> > 3 files changed, 316 insertions(+)
> > create mode 100644 arch/riscv/boot/dts/microchip/Makefile
> > create mode 100644 arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts
> >
> > diff --git a/arch/riscv/boot/dts/Makefile b/arch/riscv/boot/dts/Makefile
> > index ca1f8cbd78c0..3ea94ea0a18a 100644
> > --- a/arch/riscv/boot/dts/Makefile
> > +++ b/arch/riscv/boot/dts/Makefile
> > @@ -1,5 +1,6 @@
> > # SPDX-License-Identifier: GPL-2.0
> > subdir-y += sifive
> > subdir-y += kendryte
> > +subdir-y += microchip
> >
> > obj-$(CONFIG_BUILTIN_DTB) := $(addsuffix /, $(subdir-y))
> > diff --git a/arch/riscv/boot/dts/microchip/Makefile b/arch/riscv/boot/dts/microchip/Makefile
> > new file mode 100644
> > index 000000000000..55ad77521304
> > --- /dev/null
> > +++ b/arch/riscv/boot/dts/microchip/Makefile
> > @@ -0,0 +1,2 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += microchip-icicle-kit-a000.dtb
> > diff --git a/arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts b/arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts
> > new file mode 100644
> > index 000000000000..5848920af55c
> > --- /dev/null
> > +++ b/arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts
> > @@ -0,0 +1,313 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/* Copyright (c) 2020 Microchip Technology Inc */
> > +
> > +/dts-v1/;
> > +
> > +/* Clock frequency (in Hz) of the rtcclk */
> > +#define RTCCLK_FREQ 1000000
> > +
> > +/ {
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + model = "Microchip PolarFire-SoC";
> > + compatible = "microchip,polarfire-soc";
> > +
> > + chosen {
> > + stdout-path = &serial0;
> > + };
> > +
> > + cpus {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + timebase-frequency = <RTCCLK_FREQ>;
> > +
> > + cpu@0 {
> > + clock-frequency = <0>;
> > + compatible = "sifive,rocket0", "riscv";
> > + device_type = "cpu";
> > + i-cache-block-size = <64>;
> > + i-cache-sets = <128>;
> > + i-cache-size = <16384>;
> > + reg = <0>;
> > + riscv,isa = "rv64imac";
> > + status = "disabled";
> > +
> > + cpu0_intc: interrupt-controller {
> > + #interrupt-cells = <1>;
> > + compatible = "riscv,cpu-intc";
> > + interrupt-controller;
> > + };
> > + };
> > +
> > + cpu@1 {
> > + clock-frequency = <0>;
> > + compatible = "sifive,rocket0", "riscv";
> > + d-cache-block-size = <64>;
> > + d-cache-sets = <64>;
> > + d-cache-size = <32768>;
> > + d-tlb-sets = <1>;
> > + d-tlb-size = <32>;
> > + device_type = "cpu";
> > + i-cache-block-size = <64>;
> > + i-cache-sets = <64>;
> > + i-cache-size = <32768>;
> > + i-tlb-sets = <1>;
> > + i-tlb-size = <32>;
> > + mmu-type = "riscv,sv39";
> > + reg = <1>;
> > + riscv,isa = "rv64imafdc";
> > + tlb-split;
> > + status = "okay";
> > +
> > + cpu1_intc: interrupt-controller {
> > + #interrupt-cells = <1>;
> > + compatible = "riscv,cpu-intc";
> > + interrupt-controller;
> > + };
> > + };
> > +
> > + cpu@2 {
> > + clock-frequency = <0>;
> > + compatible = "sifive,rocket0", "riscv";
> > + d-cache-block-size = <64>;
> > + d-cache-sets = <64>;
> > + d-cache-size = <32768>;
> > + d-tlb-sets = <1>;
> > + d-tlb-size = <32>;
> > + device_type = "cpu";
> > + i-cache-block-size = <64>;
> > + i-cache-sets = <64>;
> > + i-cache-size = <32768>;
> > + i-tlb-sets = <1>;
> > + i-tlb-size = <32>;
> > + mmu-type = "riscv,sv39";
> > + reg = <2>;
> > + riscv,isa = "rv64imafdc";
> > + tlb-split;
> > + status = "okay";
> > +
> > + cpu2_intc: interrupt-controller {
> > + #interrupt-cells = <1>;
> > + compatible = "riscv,cpu-intc";
> > + interrupt-controller;
> > + };
> > + };
> > +
> > + cpu@3 {
> > + clock-frequency = <0>;
> > + compatible = "sifive,rocket0", "riscv";
> > + d-cache-block-size = <64>;
> > + d-cache-sets = <64>;
> > + d-cache-size = <32768>;
> > + d-tlb-sets = <1>;
> > + d-tlb-size = <32>;
> > + device_type = "cpu";
> > + i-cache-block-size = <64>;
> > + i-cache-sets = <64>;
> > + i-cache-size = <32768>;
> > + i-tlb-sets = <1>;
> > + i-tlb-size = <32>;
> > + mmu-type = "riscv,sv39";
> > + reg = <3>;
> > + riscv,isa = "rv64imafdc";
> > + tlb-split;
> > + status = "okay";
> > +
> > + cpu3_intc: interrupt-controller {
> > + #interrupt-cells = <1>;
> > + compatible = "riscv,cpu-intc";
> > + interrupt-controller;
> > + };
> > + };
> > +
> > + cpu@4 {
> > + clock-frequency = <0>;
> > + compatible = "sifive,rocket0", "riscv";
> > + d-cache-block-size = <64>;
> > + d-cache-sets = <64>;
> > + d-cache-size = <32768>;
> > + d-tlb-sets = <1>;
> > + d-tlb-size = <32>;
> > + device_type = "cpu";
> > + i-cache-block-size = <64>;
> > + i-cache-sets = <64>;
> > + i-cache-size = <32768>;
> > + i-tlb-sets = <1>;
> > + i-tlb-size = <32>;
> > + mmu-type = "riscv,sv39";
> > + reg = <4>;
> > + riscv,isa = "rv64imafdc";
> > + tlb-split;
> > + status = "okay";
> > + cpu4_intc: interrupt-controller {
> > + #interrupt-cells = <1>;
> > + compatible = "riscv,cpu-intc";
> > + interrupt-controller;
> > + };
> > + };
> > + };
> > +
> > + memory@80000000 {
> > + device_type = "memory";
> > + reg = <0x0 0x80000000 0x0 0x40000000>;
> > + clocks = <&clkcfg 26>;
> > + };
> > +
> > + soc {
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + compatible = "simple-bus";
> > + ranges;
> > +
> > + cache-controller@2010000 {
> > + compatible = "sifive,fu540-c000-ccache", "cache";
> > + cache-block-size = <64>;
> > + cache-level = <2>;
> > + cache-sets = <1024>;
> > + cache-size = <2097152>;
> > + cache-unified;
> > + interrupt-parent = <&plic>;
> > + interrupts = <1 2 3>;
> > + reg = <0x0 0x2010000 0x0 0x1000>;
> > + };
> > +
> > + clint@2000000 {
> > + compatible = "riscv,clint0";
> > + reg = <0x0 0x2000000 0x0 0xC000>;
> > + interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7
> > + &cpu1_intc 3 &cpu1_intc 7
> > + &cpu2_intc 3 &cpu2_intc 7
> > + &cpu3_intc 3 &cpu3_intc 7
> > + &cpu4_intc 3 &cpu4_intc 7>;
> > + };
> > +
> > + plic: interrupt-controller@c000000 {
> > + #interrupt-cells = <1>;
> > + compatible = "sifive,plic-1.0.0";
> > + reg = <0x0 0xc000000 0x0 0x4000000>;
> > + riscv,ndev = <53>;
> > + interrupt-controller;
> > + interrupts-extended = <&cpu0_intc 11
> > + &cpu1_intc 11 &cpu1_intc 9
> > + &cpu2_intc 11 &cpu2_intc 9
> > + &cpu3_intc 11 &cpu3_intc 9
> > + &cpu4_intc 11 &cpu4_intc 9>;
> > + };
> > +
> > + dma@3000000 {
> > + compatible = "sifive,fu540-c000-pdma";
> > + reg = <0x0 0x3000000 0x0 0x8000>;
> > + interrupt-parent = <&plic>;
> > + interrupts = <23 24 25 26 27 28 29 30>;
> > + #dma-cells = <1>;
> > + };
> > +
> > + refclk: refclk {
> > + compatible = "fixed-clock";
> > + #clock-cells = <0>;
> > + clock-frequency = <600000000>;
> > + clock-output-names = "msspllclk";
> > + };
> > +
> > + clkcfg: clkcfg@20002000 {
> > + compatible = "microchip,pfsoc-clkcfg";
> > + reg = <0x0 0x20002000 0x0 0x1000>;
> > + reg-names = "mss_sysreg";
> > + clocks = <&refclk>;
> > + #clock-cells = <1>;
> > + clock-output-names = "cpuclk", "axiclk", "ahbclk", "ENVMclk", "MAC0clk", "MAC1clk", "MMCclk", "TIMERclk", "MMUART0clk", "MMUART1clk", "MMUART2clk", "MMUART3clk", "MMUART4clk", "SPI0clk", "SPI1clk", "I2C0clk", "I2C1clk", "CAN0clk", "CAN1clk", "USBclk", "RESERVED", "RTCclk", "QSPIclk", "GPIO0clk", "GPIO1clk", "GPIO2clk", "DDRCclk", "FIC0clk", "FIC1clk", "FIC2clk", "FIC3clk", "ATHENAclk", "CFMclk";
> > + };
> > +
> > + serial0: serial@20000000 {
> > + compatible = "ns16550a";
> > + reg = <0x0 0x20000000 0x0 0x400>;
> > + reg-io-width = <4>;
> > + reg-shift = <2>;
> > + interrupt-parent = <&plic>;
> > + interrupts = <90>;
> > + current-speed = <115200>;
> > + clocks = <&clkcfg 8>;
> > + status = "okay";
> > + };
> > +
> > + serial1: serial@20100000 {
> > + compatible = "ns16550a";
> > + reg = <0x0 0x20100000 0x0 0x400>;
> > + reg-io-width = <4>;
> > + reg-shift = <2>;
> > + interrupt-parent = <&plic>;
> > + interrupts = <91>;
> > + current-speed = <115200>;
> > + clocks = <&clkcfg 9>;
> > + status = "okay";
> > + };
> > +
> > + serial2: serial@20102000 {
> > + compatible = "ns16550a";
> > + reg = <0x0 0x20102000 0x0 0x400>;
> > + reg-io-width = <4>;
> > + reg-shift = <2>;
> > + interrupt-parent = <&plic>;
> > + interrupts = <92>;
> > + current-speed = <115200>;
> > + clocks = <&clkcfg 10>;
> > + status = "okay";
> > + };
> > +
> > + serial3: serial@20104000 {
> > + compatible = "ns16550a";
> > + reg = <0x0 0x20104000 0x0 0x400>;
> > + reg-io-width = <4>;
> > + reg-shift = <2>;
> > + interrupt-parent = <&plic>;
> > + interrupts = <93>;
> > + current-speed = <115200>;
> > + clocks = <&clkcfg 11>;
> > + status = "okay";
> > + };
> > +
> > + sdcard: sdhc@20008000 {
> > + compatible = "cdns,sd4hc";
> > + reg = <0x0 0x20008000 0x0 0x1000>;
> > + interrupt-parent = <&plic>;
> > + interrupts = <88>;
> > + pinctrl-names = "default";
> > + clocks = <&clkcfg 6>;
> > + bus-width = <4>;
> > + disable-wp;
> > + no-1-8-v;
> > + cap-mmc-highspeed;
> > + cap-sd-highspeed;
> > + card-detect-delay = <200>;
> > + sd-uhs-sdr12;
> > + sd-uhs-sdr25;
> > + sd-uhs-sdr50;
> > + sd-uhs-sdr104;
> > + max-frequency = <200000000>;
> > + status = "okay";
> > + };
> > +
> > + emac1: ethernet@20112000 {
> > + compatible = "cdns,macb";
> > + reg = <0x0 0x20112000 0x0 0x2000>;
> > + interrupt-parent = <&plic>;
> > + interrupts = <70 71 72 73>;
> > + mac-address = [56 34 12 00 FC 00];
> > + phy-mode = "sgmii";
> > + clocks = <&clkcfg 5>, <&clkcfg 2>;
> > + clock-names = "pclk", "hclk";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + phy1: ethernet-phy@9 {
> > + reg = <9>;
> > + ti,fifo-depth = <0x01>;
> > + };
> > + };
> > +
> > + uio_axi_lsram@2030000000 {
> > + compatible = "generic-uio";
> > + reg = <0x20 0x30000000 0 0x80000000 >;
> > + status = "okay";
> > + };
> > + };
> > +};
> > --
> > 2.25.1
> >
>
> Regards,
> Anup
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv
--
Regards,
Atish
next prev parent reply other threads:[~2020-10-30 20:29 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-28 23:27 [RFC PATCH 0/3] Add Microchip PolarFire Soc Support Atish Patra
2020-10-28 23:27 ` [RFC PATCH 1/3] RISC-V: Add Microchip PolarFire SoC kconfig option Atish Patra
2020-10-30 9:08 ` Anup Patel
2020-11-03 9:55 ` Bin Meng
2020-11-06 7:14 ` Palmer Dabbelt
2020-10-28 23:27 ` [RFC PATCH 2/3] RISC-V: Initial DTS for Microchip ICICLE board Atish Patra
2020-10-29 10:24 ` Ben Dooks
2020-10-30 7:11 ` Atish Patra
2020-10-30 21:19 ` Ben Dooks
2020-11-03 15:07 ` Atish Patra
2020-11-03 15:19 ` Ben Dooks
2020-11-03 18:10 ` Cyril.Jean
2020-11-03 18:28 ` Ben Dooks
2020-11-03 18:36 ` Atish Patra
2020-11-03 18:39 ` Ben Dooks
2020-11-03 18:45 ` Atish Patra
2020-11-03 18:40 ` Cyril.Jean
2020-11-03 18:46 ` Ben Dooks
2020-11-04 2:41 ` Bin Meng
2020-10-30 9:05 ` Anup Patel
2020-10-30 20:27 ` Atish Patra [this message]
2020-11-03 10:59 ` Ben Dooks
2020-11-03 15:08 ` Atish Patra
2020-10-30 21:20 ` Ben Dooks
2020-11-03 10:00 ` Bin Meng
2020-11-03 18:19 ` Cyril.Jean
2020-11-03 18:38 ` Atish Patra
2020-11-03 18:50 ` Cyril.Jean
2020-11-03 19:02 ` Atish Patra
2020-11-06 7:14 ` Palmer Dabbelt
2020-10-28 23:27 ` [RFC PATCH 3/3] RISC-V: Enable Microchip PolarFire ICICLE SoC Atish Patra
2020-10-30 9:09 ` Anup Patel
2020-10-30 21:21 ` Ben Dooks
2020-11-03 10:03 ` Bin Meng
2020-11-06 7:14 ` Palmer Dabbelt
2020-11-06 7:14 ` [RFC PATCH 0/3] Add Microchip PolarFire Soc Support Palmer Dabbelt
2020-11-06 7:37 ` Atish Patra
2020-11-06 8:11 ` Palmer Dabbelt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAOnJCUKCbkZVGX5Rjputs9QQAHCvH6Fikt7kVGsyCkNjbdMv=Q@mail.gmail.com' \
--to=atishp@atishpatra.org \
--cc=Cyril.Jean@microchip.com \
--cc=alistair.francis@wdc.com \
--cc=anup.patel@wdc.com \
--cc=anup@brainfault.org \
--cc=aou@eecs.berkeley.edu \
--cc=atish.patra@wdc.com \
--cc=daire.mcnamara@microchip.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=padmarao.begari@microchip.com \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).