[PATCH 0/4] MMC support for Octeon platforms.

[PATCH 0/4] MMC support for Octeon platforms.

[Steven J. Hill]

From: "Steven J. Hill" <Steven.Hill@cavium.com>

Enable MMC support on Octeon SoCs. Tested on EdgeRouter Pro,
SFF7000, and SFF7800 platforms. This should be applied on top
of the "Cavium MMC driver" patch series from Jan Glauber.

Steven J. Hill (3):
  mmc: cavium: Fix detection of block or byte addressing.
  mmc: cavium: Add MMC support for Octeon SOCs.
  MIPS: Octeon: cavium_octeon_defconfig: Enable Octeon MMC

Ulf Hansson (1):
  mmc: core: Export API to allow hosts to get the card address

 arch/mips/configs/cavium_octeon_defconfig |   5 +
 drivers/mmc/core/core.c                   |   6 +
 drivers/mmc/host/Kconfig                  |  10 +
 drivers/mmc/host/Makefile                 |   2 +
 drivers/mmc/host/cavium-octeon.c          | 351 ++++++++++++++++++++++++++++++
 drivers/mmc/host/cavium.c                 |   2 +-
 include/linux/mmc/card.h                  |   2 +
 7 files changed, 377 insertions(+), 1 deletion(-)
 create mode 100644 drivers/mmc/host/cavium-octeon.c

-- 
2.1.4

[PATCH 1/4] mmc: core: Export API to allow hosts to get the card address

[Steven J. Hill]

From: Ulf Hansson <ulf.hansson@linaro.org>

Some hosts controllers, like Cavium, needs to know whether the card
operates in byte- or block-address mode. Therefore export a new API,
mmc_card_is_blockaddr(), which provides this information.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Steven J. Hill <Steven.Hill@cavium.com>
Acked-by: David Daney <david.daney@cavium.com>
---
 drivers/mmc/core/core.c  | 6 ++++++
 include/linux/mmc/card.h | 2 ++
 2 files changed, 8 insertions(+)

diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 926e0fd..f9fae34 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -2555,6 +2555,12 @@ unsigned int mmc_calc_max_discard(struct mmc_card *card)
 }
 EXPORT_SYMBOL(mmc_calc_max_discard);
 
+bool mmc_card_is_blockaddr(struct mmc_card *card)
+{
+       return card ? mmc_card_blockaddr(card) : false;
+}
+EXPORT_SYMBOL(mmc_card_is_blockaddr);
+
 int mmc_set_blocklen(struct mmc_card *card, unsigned int blocklen)
 {
 	struct mmc_command cmd = {};
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index 77e61e0..4cd9450 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -307,6 +307,8 @@ static inline bool mmc_large_sector(struct mmc_card *card)
 	return card->ext_csd.data_sector_size == 4096;
 }
 
+bool mmc_card_is_blockaddr(struct mmc_card *card);
+
 #define mmc_card_mmc(c)		((c)->type == MMC_TYPE_MMC)
 #define mmc_card_sd(c)		((c)->type == MMC_TYPE_SD)
 #define mmc_card_sdio(c)	((c)->type == MMC_TYPE_SDIO)
-- 
2.1.4

[PATCH 2/4] mmc: cavium: Fix detection of block or byte addressing.

[Steven J. Hill]

From: "Steven J. Hill" <Steven.Hill@cavium.com>

Use the mmc_card_is_blockaddr() function to properly detect if the
card uses byte or block addressing.

Signed-off-by: Steven J. Hill <Steven.Hill@cavium.com>
Acked-by: David Daney <david.daney@cavium.com>
---
 drivers/mmc/host/cavium.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/host/cavium.c b/drivers/mmc/host/cavium.c
index d842b69..36b25e4 100644
--- a/drivers/mmc/host/cavium.c
+++ b/drivers/mmc/host/cavium.c
@@ -629,7 +629,7 @@ static u64 prepare_ext_dma(struct mmc_host *mmc, struct mmc_request *mrq)
 
 	emm_dma = FIELD_PREP(MIO_EMM_DMA_VAL, 1) |
 		  FIELD_PREP(MIO_EMM_DMA_SECTOR,
-			     (mrq->data->blksz == 512) ? 1 : 0) |
+			     mmc_card_is_blockaddr(mmc->card) ? 1 : 0) |
 		  FIELD_PREP(MIO_EMM_DMA_RW,
 			     (mrq->data->flags & MMC_DATA_WRITE) ? 1 : 0) |
 		  FIELD_PREP(MIO_EMM_DMA_BLOCK_CNT, mrq->data->blocks) |
-- 
2.1.4

[PATCH 3/4] mmc: cavium: Add MMC support for Octeon SOCs.

[Steven J. Hill]

From: "Steven J. Hill" <Steven.Hill@cavium.com>

Add platform driver for Octeon SOCs.

Signed-off-by: Steven J. Hill <Steven.Hill@cavium.com>
Signed-off-by: David Daney <david.daney@cavium.com>
---
 drivers/mmc/host/Kconfig         |  10 ++
 drivers/mmc/host/Makefile        |   2 +
 drivers/mmc/host/cavium-octeon.c | 351 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 363 insertions(+)
 create mode 100644 drivers/mmc/host/cavium-octeon.c

diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index c882795..8b9b454 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -622,6 +622,16 @@ config SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND
 	help
 	  If you say yes here SD-Cards may work on the EZkit.
 
+config MMC_CAVIUM_OCTEON
+	tristate "Cavium OCTEON SD/MMC Card Interface support"
+	depends on CAVIUM_OCTEON_SOC
+	help
+	  This selects Cavium OCTEON SD/MMC card Interface.
+	  If you have an OCTEON board with a Multimedia Card slot,
+	  say Y or M here.
+
+	  If unsure, say N.
+
 config MMC_CAVIUM_THUNDERX
 	tristate "Cavium ThunderX SD/MMC Card Interface support"
 	depends on PCI && 64BIT && (ARM64 || COMPILE_TEST)
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index f40c6b3..7f1ee0b 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -42,6 +42,8 @@ obj-$(CONFIG_MMC_SDHI)		+= sh_mobile_sdhi.o
 obj-$(CONFIG_MMC_CB710)		+= cb710-mmc.o
 obj-$(CONFIG_MMC_VIA_SDMMC)	+= via-sdmmc.o
 obj-$(CONFIG_SDH_BFIN)		+= bfin_sdh.o
+octeon-mmc-objs := cavium.o cavium-octeon.o
+obj-$(CONFIG_MMC_CAVIUM_OCTEON) += octeon-mmc.o
 thunderx-mmc-objs := cavium.o cavium-thunderx.o
 obj-$(CONFIG_MMC_CAVIUM_THUNDERX) += thunderx-mmc.o
 obj-$(CONFIG_MMC_DW)		+= dw_mmc.o
diff --git a/drivers/mmc/host/cavium-octeon.c b/drivers/mmc/host/cavium-octeon.c
new file mode 100644
index 0000000..772d090
--- /dev/null
+++ b/drivers/mmc/host/cavium-octeon.c
@@ -0,0 +1,351 @@
+/*
+ * Driver for MMC and SSD cards for Cavium OCTEON SOCs.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2012-2017 Cavium Inc.
+ */
+#include <linux/dma-mapping.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/slot-gpio.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <asm/octeon/octeon.h>
+#include "cavium.h"
+
+#define CVMX_MIO_BOOT_CTL CVMX_ADD_IO_SEG(0x00011800000000D0ull)
+
+/*
+ * The l2c* functions below are used for the EMMC-17978 workaround.
+ *
+ * Due to a bug in the design of the MMC bus hardware, the 2nd to last
+ * cache block of a DMA read must be locked into the L2 Cache.
+ * Otherwise, data corruption may occur.
+ */
+static inline void *phys_to_ptr(u64 address)
+{
+	return (void *)(address | (1ull << 63)); /* XKPHYS */
+}
+
+/*
+ * Lock a single line into L2. The line is zeroed before locking
+ * to make sure no dram accesses are made.
+ */
+static void l2c_lock_line(u64 addr)
+{
+	char *addr_ptr = phys_to_ptr(addr);
+
+	asm volatile (
+		"cache 31, %[line]"	/* Unlock the line */
+		::[line] "m" (*addr_ptr));
+}
+
+/* Unlock a single line in the L2 cache. */
+static void l2c_unlock_line(u64 addr)
+{
+	char *addr_ptr = phys_to_ptr(addr);
+
+	asm volatile (
+		"cache 23, %[line]"	/* Unlock the line */
+		::[line] "m" (*addr_ptr));
+}
+
+/* Locks a memory region in the L2 cache. */
+static void l2c_lock_mem_region(u64 start, u64 len)
+{
+	u64 end;
+
+	/* Round start/end to cache line boundaries */
+	end = ALIGN(start + len - 1, CVMX_CACHE_LINE_SIZE);
+	start = ALIGN(start, CVMX_CACHE_LINE_SIZE);
+
+	while (start <= end) {
+		l2c_lock_line(start);
+		start += CVMX_CACHE_LINE_SIZE;
+	}
+	asm volatile("sync");
+}
+
+/* Unlock a memory region in the L2 cache. */
+static void l2c_unlock_mem_region(u64 start, u64 len)
+{
+	u64 end;
+
+	/* Round start/end to cache line boundaries */
+	end = ALIGN(start + len - 1, CVMX_CACHE_LINE_SIZE);
+	start = ALIGN(start, CVMX_CACHE_LINE_SIZE);
+
+	while (start <= end) {
+		l2c_unlock_line(start);
+		start += CVMX_CACHE_LINE_SIZE;
+	}
+}
+
+static void octeon_mmc_acquire_bus(struct cvm_mmc_host *host)
+{
+	if (!host->has_ciu3) {
+		down(&octeon_bootbus_sem);
+		/* For CN70XX, switch the MMC controller onto the bus. */
+		if (OCTEON_IS_MODEL(OCTEON_CN70XX))
+			writeq(0, (void __iomem *)CVMX_MIO_BOOT_CTL);
+	} else {
+		down(&host->mmc_serializer);
+	}
+}
+
+static void octeon_mmc_release_bus(struct cvm_mmc_host *host)
+{
+	if (!host->has_ciu3)
+		up(&octeon_bootbus_sem);
+	else
+		up(&host->mmc_serializer);
+}
+
+static void octeon_mmc_int_enable(struct cvm_mmc_host *host, u64 val)
+{
+	writeq(val, host->base + MIO_EMM_INT(host));
+	if (!host->dma_active || (host->dma_active && !host->has_ciu3))
+		writeq(val, host->base + MIO_EMM_INT_EN(host));
+}
+
+static void octeon_mmc_set_shared_power(struct cvm_mmc_host *host, int dir)
+{
+	if (dir == 0)
+		if (!atomic_dec_return(&host->shared_power_users))
+			gpiod_set_value_cansleep(host->global_pwr_gpiod, 0);
+	if (dir == 1)
+		if (atomic_inc_return(&host->shared_power_users) == 1)
+			gpiod_set_value_cansleep(host->global_pwr_gpiod, 1);
+}
+
+static void octeon_mmc_dmar_fixup(struct cvm_mmc_host *host,
+				  struct mmc_command *cmd,
+				  struct mmc_data *data,
+				  u64 addr)
+{
+	if (cmd->opcode != MMC_WRITE_MULTIPLE_BLOCK)
+		return;
+	if (data->blksz * data->blocks <= 1024)
+		return;
+
+	host->n_minus_one = addr + (data->blksz * data->blocks) - 1024;
+	l2c_lock_mem_region(host->n_minus_one, 512);
+}
+
+static void octeon_mmc_dmar_fixup_done(struct cvm_mmc_host *host)
+{
+	if (!host->n_minus_one)
+		return;
+	l2c_unlock_mem_region(host->n_minus_one, 512);
+	host->n_minus_one = 0;
+}
+
+static int octeon_mmc_probe(struct platform_device *pdev)
+{
+	struct device_node *cn, *node = pdev->dev.of_node;
+	struct cvm_mmc_host *host;
+	struct resource	*res;
+	void __iomem *base;
+	int mmc_irq[9];
+	int i, ret = 0;
+	u64 val;
+
+	host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL);
+	if (!host)
+		return -ENOMEM;
+
+	spin_lock_init(&host->irq_handler_lock);
+	sema_init(&host->mmc_serializer, 1);
+
+	host->dev = &pdev->dev;
+	host->acquire_bus = octeon_mmc_acquire_bus;
+	host->release_bus = octeon_mmc_release_bus;
+	host->int_enable = octeon_mmc_int_enable;
+	host->set_shared_power = octeon_mmc_set_shared_power;
+	if (OCTEON_IS_MODEL(OCTEON_CN6XXX) ||
+	    OCTEON_IS_MODEL(OCTEON_CNF7XXX)) {
+		host->dmar_fixup = octeon_mmc_dmar_fixup;
+		host->dmar_fixup_done = octeon_mmc_dmar_fixup_done;
+	}
+
+	host->sys_freq = octeon_get_io_clock_rate();
+
+	if (of_device_is_compatible(node, "cavium,octeon-7890-mmc")) {
+		host->big_dma_addr = true;
+		host->need_irq_handler_lock = true;
+		host->has_ciu3 = true;
+		host->use_sg = true;
+		/*
+		 * First seven are the EMM_INT bits 0..6, then two for
+		 * the EMM_DMA_INT bits
+		 */
+		for (i = 0; i < 9; i++) {
+			mmc_irq[i] = platform_get_irq(pdev, i);
+			if (mmc_irq[i] < 0)
+				return mmc_irq[i];
+
+			/* work around legacy u-boot device trees */
+			irq_set_irq_type(mmc_irq[i], IRQ_TYPE_EDGE_RISING);
+		}
+	} else {
+		host->big_dma_addr = false;
+		host->need_irq_handler_lock = false;
+		host->has_ciu3 = false;
+		/* First one is EMM second DMA */
+		for (i = 0; i < 2; i++) {
+			mmc_irq[i] = platform_get_irq(pdev, i);
+			if (mmc_irq[i] < 0)
+				return mmc_irq[i];
+		}
+	}
+
+	host->last_slot = -1;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Platform resource[0] is missing\n");
+		return -ENXIO;
+	}
+	base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+	host->base = (void __iomem *)base;
+	host->reg_off = 0;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!res) {
+		dev_err(&pdev->dev, "Platform resource[1] is missing\n");
+		return -EINVAL;
+	}
+	base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+	host->dma_base = (void __iomem *)base;
+	/*
+	 * To keep the register addresses shared we intentionaly use
+	 * a negative offset here, first register used on Octeon therefore
+	 * starts at 0x20 (MIO_EMM_DMA_CFG).
+	 */
+	host->reg_off_dma = -0x20;
+
+	ret = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64));
+	if (ret)
+		return ret;
+
+	/*
+	 * Clear out any pending interrupts that may be left over from
+	 * bootloader.
+	 */
+	val = readq(host->base + MIO_EMM_INT(host));
+	writeq(val, host->base + MIO_EMM_INT(host));
+
+	if (host->has_ciu3) {
+		/* Only CMD_DONE, DMA_DONE, CMD_ERR, DMA_ERR */
+		for (i = 1; i <= 4; i++) {
+			ret = devm_request_irq(&pdev->dev, mmc_irq[i],
+					       cvm_mmc_interrupt,
+					       0, cvm_mmc_irq_names[i], host);
+			if (ret < 0) {
+				dev_err(&pdev->dev, "Error: devm_request_irq %d\n",
+					mmc_irq[i]);
+				return ret;
+			}
+		}
+	} else {
+		ret = devm_request_irq(&pdev->dev, mmc_irq[0],
+				       cvm_mmc_interrupt, 0, KBUILD_MODNAME,
+				       host);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "Error: devm_request_irq %d\n",
+				mmc_irq[0]);
+			return ret;
+		}
+	}
+
+	host->global_pwr_gpiod = devm_gpiod_get_optional(&pdev->dev,
+							 "power-gpios",
+							 GPIOD_OUT_HIGH);
+	if (IS_ERR(host->global_pwr_gpiod)) {
+		dev_err(&pdev->dev, "Invalid power GPIO\n");
+		return PTR_ERR(host->global_pwr_gpiod);
+	}
+
+	platform_set_drvdata(pdev, host);
+
+	i = 0;
+	for_each_child_of_node(node, cn) {
+		host->slot_pdev[i] =
+			of_platform_device_create(cn, NULL, &pdev->dev);
+		if (!host->slot_pdev[i]) {
+			i++;
+			continue;
+		}
+		ret = cvm_mmc_of_slot_probe(&host->slot_pdev[i]->dev, host);
+		if (ret) {
+			dev_err(&pdev->dev, "Error populating slots\n");
+			octeon_mmc_set_shared_power(host, 0);
+			return ret;
+		}
+		i++;
+	}
+	return 0;
+}
+
+static int octeon_mmc_remove(struct platform_device *pdev)
+{
+	struct cvm_mmc_host *host = platform_get_drvdata(pdev);
+	u64 dma_cfg;
+	int i;
+
+	for (i = 0; i < CAVIUM_MAX_MMC; i++)
+		if (host->slot[i])
+			cvm_mmc_of_slot_remove(host->slot[i]);
+
+	dma_cfg = readq(host->dma_base + MIO_EMM_DMA_CFG(host));
+	dma_cfg &= ~MIO_EMM_DMA_CFG_EN;
+	writeq(dma_cfg, host->dma_base + MIO_EMM_DMA_CFG(host));
+
+	octeon_mmc_set_shared_power(host, 0);
+	return 0;
+}
+
+static const struct of_device_id octeon_mmc_match[] = {
+	{
+		.compatible = "cavium,octeon-6130-mmc",
+	},
+	{
+		.compatible = "cavium,octeon-7890-mmc",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, octeon_mmc_match);
+
+static struct platform_driver octeon_mmc_driver = {
+	.probe		= octeon_mmc_probe,
+	.remove		= octeon_mmc_remove,
+	.driver		= {
+		.name	= KBUILD_MODNAME,
+		.of_match_table = octeon_mmc_match,
+	},
+};
+
+static int __init octeon_mmc_init(void)
+{
+	return platform_driver_register(&octeon_mmc_driver);
+}
+
+static void __exit octeon_mmc_cleanup(void)
+{
+	platform_driver_unregister(&octeon_mmc_driver);
+}
+
+module_init(octeon_mmc_init);
+module_exit(octeon_mmc_cleanup);
+
+MODULE_AUTHOR("Cavium Inc. <support@cavium.com>");
+MODULE_DESCRIPTION("Low-level driver for Cavium OCTEON MMC/SSD card");
+MODULE_LICENSE("GPL");
-- 
2.1.4

[PATCH 4/4] MIPS: Octeon: cavium_octeon_defconfig: Enable Octeon MMC

[Steven J. Hill]

From: "Steven J. Hill" <Steven.Hill@cavium.com>

Enable the Octeon MMC driver in the defconfig.

Signed-off-by: Steven J. Hill <Steven.Hill@cavium.com>
---
 arch/mips/configs/cavium_octeon_defconfig | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/mips/configs/cavium_octeon_defconfig b/arch/mips/configs/cavium_octeon_defconfig
index 31e3c4d..d4fda41 100644
--- a/arch/mips/configs/cavium_octeon_defconfig
+++ b/arch/mips/configs/cavium_octeon_defconfig
@@ -127,6 +127,11 @@ CONFIG_USB_EHCI_HCD=m
 CONFIG_USB_EHCI_HCD_PLATFORM=m
 CONFIG_USB_OHCI_HCD=m
 CONFIG_USB_OHCI_HCD_PLATFORM=m
+CONFIG_MMC=y
+# CONFIG_PWRSEQ_EMMC is not set
+# CONFIG_PWRSEQ_SIMPLE is not set
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_MMC_CAVIUM_OCTEON=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1307=y
 CONFIG_STAGING=y
-- 
2.1.4

Re: [PATCH 0/4] MMC support for Octeon platforms.

[Ulf Hansson]

On 24 April 2017 at 20:41, Steven J. Hill <steven.hill@cavium.com> wrote:
> From: "Steven J. Hill" <Steven.Hill@cavium.com>
>
> Enable MMC support on Octeon SoCs. Tested on EdgeRouter Pro,
> SFF7000, and SFF7800 platforms. This should be applied on top
> of the "Cavium MMC driver" patch series from Jan Glauber.
>
> Steven J. Hill (3):
>   mmc: cavium: Fix detection of block or byte addressing.
>   mmc: cavium: Add MMC support for Octeon SOCs.
>   MIPS: Octeon: cavium_octeon_defconfig: Enable Octeon MMC
>
> Ulf Hansson (1):
>   mmc: core: Export API to allow hosts to get the card address
>
>  arch/mips/configs/cavium_octeon_defconfig |   5 +
>  drivers/mmc/core/core.c                   |   6 +
>  drivers/mmc/host/Kconfig                  |  10 +
>  drivers/mmc/host/Makefile                 |   2 +
>  drivers/mmc/host/cavium-octeon.c          | 351 ++++++++++++++++++++++++++++++
>  drivers/mmc/host/cavium.c                 |   2 +-
>  include/linux/mmc/card.h                  |   2 +
>  7 files changed, 377 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/mmc/host/cavium-octeon.c
>
> --
> 2.1.4
>

Thanks, applied patch 1->3. Patch 4 is for the MIPS SoC maintainer,
unless I get an ack for it.

Kind regards
Uffe

Re: [PATCH 0/4] MMC support for Octeon platforms.

[Steven J. Hill]

On 04/24/2017 02:56 PM, Ulf Hansson wrote:

[....]
> 
> Thanks, applied patch 1->3. Patch 4 is for the MIPS SoC maintainer,
> unless I get an ack for it.
> 
Thanks Uffe.

Ralf, please take patch 4/4 into your -next branch. Cheers.


-Steve

Re: [PATCH 0/4] MMC support for Octeon platforms.

[Ralf Baechle]

On Mon, Apr 24, 2017 at 09:56:42PM +0200, Ulf Hansson wrote:

> Thanks, applied patch 1->3. Patch 4 is for the MIPS SoC maintainer,
> unless I get an ack for it.

Here's the Ack for patch 4:

Acked-by: Ralf Baechle <ralf@linux-mips.org>

  Ralf

Re: [PATCH 0/4] MMC support for Octeon platforms.

[Ulf Hansson]

On 25 April 2017 at 21:54, Ralf Baechle <ralf@linux-mips.org> wrote:
> On Mon, Apr 24, 2017 at 09:56:42PM +0200, Ulf Hansson wrote:
>
>> Thanks, applied patch 1->3. Patch 4 is for the MIPS SoC maintainer,
>> unless I get an ack for it.
>
> Here's the Ack for patch 4:
>
> Acked-by: Ralf Baechle <ralf@linux-mips.org>
>
>   Ralf

Thanks, applied patch4 for next!

Kind regards
Uffe