[PATCH] mmc/host: fix repeated words in comments

[PATCH] mmc/host: fix repeated words in comments

[wangjianli]

Delete the redundant word 'the'.

Signed-off-by: wangjianli <wangjianli@cdjrlc.com>
---
 drivers/mmc/host/dw_mmc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 581614196a84..7f00d7d7e35e 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -1363,7 +1363,7 @@ static void __dw_mci_start_request(struct dw_mci *host,
 		 * is just about to roll over.
 		 *
 		 * We do this whole thing under spinlock and only if the
-		 * command hasn't already completed (indicating the the irq
+		 * command hasn't already completed (indicating the irq
 		 * already ran so we don't want the timeout).
 		 */
 		spin_lock_irqsave(&host->irq_lock, irqflags);
-- 
2.36.1

Re: [PATCH] mmc/host: fix repeated words in comments

[Ulf Hansson]

On Tue, 23 Aug 2022 at 16:30, wangjianli <wangjianli@cdjrlc.com> wrote:
>
> Delete the redundant word 'the'.

Patches that correct spelling mistakes make sense to me. However, I am
no longer willing to pick one patch per spelling mistake, it's just
silly and I feel like I waste my time.

Instead, I suggest you go through all mmc host drivers and fix *all*
of the spelling mistakes in one single patch. The similar can be done
for the mmc core.

Kind regards
Uffe

>
> Signed-off-by: wangjianli <wangjianli@cdjrlc.com>
> ---
>  drivers/mmc/host/dw_mmc.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index 581614196a84..7f00d7d7e35e 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -1363,7 +1363,7 @@ static void __dw_mci_start_request(struct dw_mci *host,
>                  * is just about to roll over.
>                  *
>                  * We do this whole thing under spinlock and only if the
> -                * command hasn't already completed (indicating the the irq
> +                * command hasn't already completed (indicating the irq
>                  * already ran so we don't want the timeout).
>                  */
>                 spin_lock_irqsave(&host->irq_lock, irqflags);
> --
> 2.36.1
>

[PATCH] mmc/host: fix repeated words in comments

[wangjianli]

Delete the redundant word 'the'.

Signed-off-by: wangjianli <wangjianli@cdjrlc.com>
---
 drivers/mmc/host/sdhci-esdhc-imx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 55981b0f0b10..004f84764fb7 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -1453,7 +1453,7 @@ static void sdhci_esdhc_imx_hwinit(struct sdhci_host *host)
 
 		/*
 		 * On i.MX8MM, we are running Dual Linux OS, with 1st Linux using SD Card
-		 * as rootfs storage, 2nd Linux using eMMC as rootfs storage. We let the
+		 * as rootfs storage, 2nd Linux using eMMC as rootfs storage. We let
 		 * the 1st linux configure power/clock for the 2nd Linux.
 		 *
 		 * When the 2nd Linux is booting into rootfs stage, we let the 1st Linux
-- 
2.36.1

[PATCH] mmc/host: fix repeated words in comments

[wangjianli]

Delete the redundant word 'the'.

Signed-off-by: wangjianli <wangjianli@cdjrlc.com>
---
 drivers/mmc/host/sdhci-acpi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c
index c0350e9c03f3..93fe6e5a5f9f 100644
--- a/drivers/mmc/host/sdhci-acpi.c
+++ b/drivers/mmc/host/sdhci-acpi.c
@@ -648,7 +648,7 @@ static int sdhci_acpi_emmc_amd_probe_slot(struct platform_device *pdev,
 	 *       in reading a garbage value and using the wrong presets.
 	 *
 	 *       Since HS400 and HS200 presets must be identical, we could
-	 *       instead use the the SDR104 preset register.
+	 *       instead use the SDR104 preset register.
 	 *
 	 *    If the above issues are resolved we could remove this quirk for
 	 *    firmware that that has valid presets (i.e., SDR12 <= 12 MHz).
-- 
2.36.1

[PATCH] mmc/host: fix repeated words in comments

[wangjianli]

Delete the redundant word 'the'.

Signed-off-by: wangjianli <wangjianli@cdjrlc.com>
---
 drivers/mmc/host/dw_mmc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 581614196a84..7f00d7d7e35e 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -1363,7 +1363,7 @@ static void __dw_mci_start_request(struct dw_mci *host,
 		 * is just about to roll over.
 		 *
 		 * We do this whole thing under spinlock and only if the
-		 * command hasn't already completed (indicating the the irq
+		 * command hasn't already completed (indicating the irq
 		 * already ran so we don't want the timeout).
 		 */
 		spin_lock_irqsave(&host->irq_lock, irqflags);
-- 
2.36.1

[PATCH] mmc/host: fix repeated words in comments

[wangjianli]

Delete the redundant word 'the'.

Signed-off-by: wangjianli <wangjianli@cdjrlc.com>
---
 drivers/mmc/host/sdhci-acpi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c
index c0350e9c03f3..93fe6e5a5f9f 100644
--- a/drivers/mmc/host/sdhci-acpi.c
+++ b/drivers/mmc/host/sdhci-acpi.c
@@ -648,7 +648,7 @@ static int sdhci_acpi_emmc_amd_probe_slot(struct platform_device *pdev,
 	 *       in reading a garbage value and using the wrong presets.
 	 *
 	 *       Since HS400 and HS200 presets must be identical, we could
-	 *       instead use the the SDR104 preset register.
+	 *       instead use the SDR104 preset register.
 	 *
 	 *    If the above issues are resolved we could remove this quirk for
 	 *    firmware that that has valid presets (i.e., SDR12 <= 12 MHz).
-- 
2.36.1

[PATCH] mmc/host: fix repeated words in comments

[Jilin Yuan]

 Delete the redundant word 'the'.
 Delete the redundant word 'that'.

Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
---
 drivers/mmc/host/sdhci-bcm-kona.c  | 2 +-
 drivers/mmc/host/sdhci-esdhc-imx.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/sdhci-bcm-kona.c b/drivers/mmc/host/sdhci-bcm-kona.c
index 4d4aac85cc7a..175f2038f9b6 100644
--- a/drivers/mmc/host/sdhci-bcm-kona.c
+++ b/drivers/mmc/host/sdhci-bcm-kona.c
@@ -178,7 +178,7 @@ static void sdhci_bcm_kona_init_74_clocks(struct sdhci_host *host,
 	/*
 	 *  JEDEC and SD spec specify supplying 74 continuous clocks to
 	 * device after power up. With minimum bus (100KHz) that
-	 * that translates to 740us
+	 * translates to 740us
 	 */
 	if (power_mode != MMC_POWER_OFF)
 		udelay(740);
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 55981b0f0b10..e1ada9487a8f 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -1454,7 +1454,7 @@ static void sdhci_esdhc_imx_hwinit(struct sdhci_host *host)
 		/*
 		 * On i.MX8MM, we are running Dual Linux OS, with 1st Linux using SD Card
 		 * as rootfs storage, 2nd Linux using eMMC as rootfs storage. We let the
-		 * the 1st linux configure power/clock for the 2nd Linux.
+		 * 1st linux configure power/clock for the 2nd Linux.
 		 *
 		 * When the 2nd Linux is booting into rootfs stage, we let the 1st Linux
 		 * to destroy the 2nd linux, then restart the 2nd linux, we met SDHCI dump.
-- 
2.36.1

[PATCH] mmc/host: fix repeated words in comments

[Jilin Yuan]

 Delete the redundant word 'a'.
 Delete the redundant word 'any'.

Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
---
 drivers/mmc/host/sdhci-omap.c | 2 +-
 drivers/mmc/host/sdhci.h      | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
index 86e867ffbb10..8c1c47c80c71 100644
--- a/drivers/mmc/host/sdhci-omap.c
+++ b/drivers/mmc/host/sdhci-omap.c
@@ -370,7 +370,7 @@ static int sdhci_omap_execute_tuning(struct mmc_host *mmc, u32 opcode)
 
 	/*
 	 * Stage 1: Search for a maximum pass window ignoring any
-	 * any single point failures. If the tuning value ends up
+	 * single point failures. If the tuning value ends up
 	 * near it, move away from it in stage 2 below
 	 */
 	while (phase_delay <= MAX_PHASE_DELAY) {
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index d7929d725730..624960052228 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -345,7 +345,7 @@ struct sdhci_adma2_64_desc {
  */
 #define SDHCI_MAX_SEGS		128
 
-/* Allow for a a command request and a data request at the same time */
+/* Allow for a command request and a data request at the same time */
 #define SDHCI_MAX_MRQS		2
 
 /*
-- 
2.36.1