* Re: [bug report] Input: add st-keyscan driver
[not found] <20190122185351.GA28627@kadam>
@ 2019-01-26 21:25 ` Ken Sloat
2019-01-26 22:15 ` Dmitry Torokhov
0 siblings, 1 reply; 4+ messages in thread
From: Ken Sloat @ 2019-01-26 21:25 UTC (permalink / raw)
To: Dan Carpenter
Cc: linux-input, Ken Sloat, gabriel.fernandez, dmitry.torokhov,
linux-kernel, Nate Drude
On Tue, Jan 22, 2019 at 1:53 PM Dan Carpenter <dan.carpenter@oracle.com> wrote:
>
> Hello Gabriel FERNANDEZ,
Hello Dan,
I have added CCs for the maintainers as well as Gabriel Fernandez as
currently you just have the linux-input mailing list
> The patch 062589b13991: "Input: add st-keyscan driver" from Apr 12,
> 2014, leads to the following static checker warning:
>
> drivers/input/keyboard/st-keyscan.c:156 keyscan_probe()
> error: potential zalloc NULL dereference: 'keypad_data->input_dev'
>
> drivers/input/keyboard/st-keyscan.c
> 125 static int keyscan_probe(struct platform_device *pdev)
> 126 {
> 127 struct st_keyscan *keypad_data;
> 128 struct input_dev *input_dev;
> 129 struct resource *res;
> 130 int error;
> 131
> 132 if (!pdev->dev.of_node) {
> 133 dev_err(&pdev->dev, "no DT data present\n");
> 134 return -EINVAL;
> 135 }
> 136
> 137 keypad_data = devm_kzalloc(&pdev->dev, sizeof(*keypad_data),
> 138 GFP_KERNEL);
> 139 if (!keypad_data)
> 140 return -ENOMEM;
> 141
> 142 input_dev = devm_input_allocate_device(&pdev->dev);
> 143 if (!input_dev) {
> 144 dev_err(&pdev->dev, "failed to allocate the input device\n");
> 145 return -ENOMEM;
> 146 }
> 147
> 148 input_dev->name = pdev->name;
> 149 input_dev->phys = "keyscan-keys/input0";
> 150 input_dev->dev.parent = &pdev->dev;
> 151 input_dev->open = keyscan_open;
> 152 input_dev->close = keyscan_close;
> 153
> 154 input_dev->id.bustype = BUS_HOST;
> 155
> --> 156 error = keypad_matrix_key_parse_dt(keypad_data);
> ^^^^^^^^^^^
I agree with you this would be a problem
to clarify the NULL derefence would occur here within keypad_matrix_key_parse_dt
struct device *dev = keypad_data->input_dev->dev.parent;
> This assumes we have set "keypad_data->input_dev = input_dev;" but we
> don't do that until...
>
> 157 if (error)
> 158 return error;
> 159
> 160 error = matrix_keypad_build_keymap(NULL, NULL,
> 161 keypad_data->n_rows,
> 162 keypad_data->n_cols,
> 163 NULL, input_dev);
> 164 if (error) {
> 165 dev_err(&pdev->dev, "failed to build keymap\n");
> 166 return error;
> 167 }
> 168
> 169 input_set_drvdata(input_dev, keypad_data);
> 170
> 171 keypad_data->input_dev = input_dev;
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>
> this line here. This driver has never worked and it was included almost
> five years ago. Is it worth fixing?
>
> 172
> 173 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> 174 keypad_data->base = devm_ioremap_resource(&pdev->dev, res);
> 175 if (IS_ERR(keypad_data->base))
> 176 return PTR_ERR(keypad_data->base);
> 177
>
> regards,
> dan carpenter
>
Here is the interesting thing, I was looking on patchwork, and several
of the patches including what appears to be the latest actually set
"keypad_data->input_dev = input_dev" before calling
"keypad_matrix_key_parse_dt"
From v4 on patchwork
+ if (IS_ERR(keypad_data->clk)) {
+ dev_err(&pdev->dev, "cannot get clock");
+ return PTR_ERR(keypad_data->clk);
+ }
+
+ keypad_data->input_dev = input_dev;
+
+ input_dev->name = pdev->name;
+ input_dev->phys = "keyscan-keys/input0";
+ input_dev->dev.parent = &pdev->dev;
+ input_dev->open = keyscan_open;
+ input_dev->close = keyscan_close;
+
+ input_dev->id.bustype = BUS_HOST;
+
+ error = keypad_matrix_key_parse_dt(keypad_data);
According to patchwork, these aren't listed as accepted, so I'm not
sure where the exact accepted patch came from. Looking at the commit
log, it looks like the issue you showed above was made in the original
commit 062589b1399176a9c14bc68e16169f40439d658c so I'm not quite sure
what is going on here. Maybe the maintainer can chime in with the
original patch/mailing list discussion on this. For reference, I've
added the patchwork links below
https://patchwork.kernel.org/patch/3854341/
https://patchwork.kernel.org/patch/3968891/
https://patchwork.kernel.org/patch/3969991/
Thanks,
Ken Sloat
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [bug report] Input: add st-keyscan driver
2019-01-26 21:25 ` [bug report] Input: add st-keyscan driver Ken Sloat
@ 2019-01-26 22:15 ` Dmitry Torokhov
2019-01-27 1:20 ` Ken Sloat
0 siblings, 1 reply; 4+ messages in thread
From: Dmitry Torokhov @ 2019-01-26 22:15 UTC (permalink / raw)
To: Ken Sloat; +Cc: Dan Carpenter, linux-input, Gabriel FERNANDEZ, lkml, Nate Drude
On Sat, Jan 26, 2019 at 1:25 PM Ken Sloat
<ken.sloat@ohmlinxelectronics.com> wrote:
>
> On Tue, Jan 22, 2019 at 1:53 PM Dan Carpenter <dan.carpenter@oracle.com> wrote:
> >
> > Hello Gabriel FERNANDEZ,
>
> Hello Dan,
>
> I have added CCs for the maintainers as well as Gabriel Fernandez as
> currently you just have the linux-input mailing list
>
> > The patch 062589b13991: "Input: add st-keyscan driver" from Apr 12,
> > 2014, leads to the following static checker warning:
> >
> > drivers/input/keyboard/st-keyscan.c:156 keyscan_probe()
> > error: potential zalloc NULL dereference: 'keypad_data->input_dev'
> >
> > drivers/input/keyboard/st-keyscan.c
> > 125 static int keyscan_probe(struct platform_device *pdev)
> > 126 {
> > 127 struct st_keyscan *keypad_data;
> > 128 struct input_dev *input_dev;
> > 129 struct resource *res;
> > 130 int error;
> > 131
> > 132 if (!pdev->dev.of_node) {
> > 133 dev_err(&pdev->dev, "no DT data present\n");
> > 134 return -EINVAL;
> > 135 }
> > 136
> > 137 keypad_data = devm_kzalloc(&pdev->dev, sizeof(*keypad_data),
> > 138 GFP_KERNEL);
> > 139 if (!keypad_data)
> > 140 return -ENOMEM;
> > 141
> > 142 input_dev = devm_input_allocate_device(&pdev->dev);
> > 143 if (!input_dev) {
> > 144 dev_err(&pdev->dev, "failed to allocate the input device\n");
> > 145 return -ENOMEM;
> > 146 }
> > 147
> > 148 input_dev->name = pdev->name;
> > 149 input_dev->phys = "keyscan-keys/input0";
> > 150 input_dev->dev.parent = &pdev->dev;
> > 151 input_dev->open = keyscan_open;
> > 152 input_dev->close = keyscan_close;
> > 153
> > 154 input_dev->id.bustype = BUS_HOST;
> > 155
> > --> 156 error = keypad_matrix_key_parse_dt(keypad_data);
> > ^^^^^^^^^^^
> I agree with you this would be a problem
> to clarify the NULL derefence would occur here within keypad_matrix_key_parse_dt
>
> struct device *dev = keypad_data->input_dev->dev.parent;
>
> > This assumes we have set "keypad_data->input_dev = input_dev;" but we
> > don't do that until...
> >
> > 157 if (error)
> > 158 return error;
> > 159
> > 160 error = matrix_keypad_build_keymap(NULL, NULL,
> > 161 keypad_data->n_rows,
> > 162 keypad_data->n_cols,
> > 163 NULL, input_dev);
> > 164 if (error) {
> > 165 dev_err(&pdev->dev, "failed to build keymap\n");
> > 166 return error;
> > 167 }
> > 168
> > 169 input_set_drvdata(input_dev, keypad_data);
> > 170
> > 171 keypad_data->input_dev = input_dev;
> > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> >
> > this line here. This driver has never worked and it was included almost
> > five years ago. Is it worth fixing?
> >
> > 172
> > 173 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > 174 keypad_data->base = devm_ioremap_resource(&pdev->dev, res);
> > 175 if (IS_ERR(keypad_data->base))
> > 176 return PTR_ERR(keypad_data->base);
> > 177
> >
> > regards,
> > dan carpenter
> >
>
> Here is the interesting thing, I was looking on patchwork, and several
> of the patches including what appears to be the latest actually set
> "keypad_data->input_dev = input_dev" before calling
> "keypad_matrix_key_parse_dt"
>
> From v4 on patchwork
> + if (IS_ERR(keypad_data->clk)) {
> + dev_err(&pdev->dev, "cannot get clock");
> + return PTR_ERR(keypad_data->clk);
> + }
> +
> + keypad_data->input_dev = input_dev;
> +
> + input_dev->name = pdev->name;
> + input_dev->phys = "keyscan-keys/input0";
> + input_dev->dev.parent = &pdev->dev;
> + input_dev->open = keyscan_open;
> + input_dev->close = keyscan_close;
> +
> + input_dev->id.bustype = BUS_HOST;
> +
> + error = keypad_matrix_key_parse_dt(keypad_data);
>
> According to patchwork, these aren't listed as accepted, so I'm not
> sure where the exact accepted patch came from. Looking at the commit
> log, it looks like the issue you showed above was made in the original
> commit 062589b1399176a9c14bc68e16169f40439d658c so I'm not quite sure
> what is going on here. Maybe the maintainer can chime in with the
> original patch/mailing list discussion on this. For reference, I've
> added the patchwork links below
> https://patchwork.kernel.org/patch/3854341/
> https://patchwork.kernel.org/patch/3968891/
> https://patchwork.kernel.org/patch/3969991/
It may very well be that I messed up when applying the patch. I guess
whatever platform that is using the driver has not attempted to update
their kernel since then.
Thanks.
--
Dmitry
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [bug report] Input: add st-keyscan driver
2019-01-26 22:15 ` Dmitry Torokhov
@ 2019-01-27 1:20 ` Ken Sloat
2019-01-30 8:58 ` Gabriel FERNANDEZ
0 siblings, 1 reply; 4+ messages in thread
From: Ken Sloat @ 2019-01-27 1:20 UTC (permalink / raw)
To: Dmitry Torokhov
Cc: Dan Carpenter, linux-input, Gabriel FERNANDEZ, lkml, Nate Drude,
giuseppe.condorelli
On Sat, Jan 26, 2019 at 5:15 PM Dmitry Torokhov
<dmitry.torokhov@gmail.com> wrote:
>
> On Sat, Jan 26, 2019 at 1:25 PM Ken Sloat
> <ken.sloat@ohmlinxelectronics.com> wrote:
> >
> > On Tue, Jan 22, 2019 at 1:53 PM Dan Carpenter <dan.carpenter@oracle.com> wrote:
> > >
> > > Hello Gabriel FERNANDEZ,
> >
> > Hello Dan,
> >
> > I have added CCs for the maintainers as well as Gabriel Fernandez as
> > currently you just have the linux-input mailing list
> >
> > > The patch 062589b13991: "Input: add st-keyscan driver" from Apr 12,
> > > 2014, leads to the following static checker warning:
> > >
> > > drivers/input/keyboard/st-keyscan.c:156 keyscan_probe()
> > > error: potential zalloc NULL dereference: 'keypad_data->input_dev'
> > >
> > > drivers/input/keyboard/st-keyscan.c
> > > 125 static int keyscan_probe(struct platform_device *pdev)
> > > 126 {
> > > 127 struct st_keyscan *keypad_data;
> > > 128 struct input_dev *input_dev;
> > > 129 struct resource *res;
> > > 130 int error;
> > > 131
> > > 132 if (!pdev->dev.of_node) {
> > > 133 dev_err(&pdev->dev, "no DT data present\n");
> > > 134 return -EINVAL;
> > > 135 }
> > > 136
> > > 137 keypad_data = devm_kzalloc(&pdev->dev, sizeof(*keypad_data),
> > > 138 GFP_KERNEL);
> > > 139 if (!keypad_data)
> > > 140 return -ENOMEM;
> > > 141
> > > 142 input_dev = devm_input_allocate_device(&pdev->dev);
> > > 143 if (!input_dev) {
> > > 144 dev_err(&pdev->dev, "failed to allocate the input device\n");
> > > 145 return -ENOMEM;
> > > 146 }
> > > 147
> > > 148 input_dev->name = pdev->name;
> > > 149 input_dev->phys = "keyscan-keys/input0";
> > > 150 input_dev->dev.parent = &pdev->dev;
> > > 151 input_dev->open = keyscan_open;
> > > 152 input_dev->close = keyscan_close;
> > > 153
> > > 154 input_dev->id.bustype = BUS_HOST;
> > > 155
> > > --> 156 error = keypad_matrix_key_parse_dt(keypad_data);
> > > ^^^^^^^^^^^
> > I agree with you this would be a problem
> > to clarify the NULL derefence would occur here within keypad_matrix_key_parse_dt
> >
> > struct device *dev = keypad_data->input_dev->dev.parent;
> >
> > > This assumes we have set "keypad_data->input_dev = input_dev;" but we
> > > don't do that until...
> > >
> > > 157 if (error)
> > > 158 return error;
> > > 159
> > > 160 error = matrix_keypad_build_keymap(NULL, NULL,
> > > 161 keypad_data->n_rows,
> > > 162 keypad_data->n_cols,
> > > 163 NULL, input_dev);
> > > 164 if (error) {
> > > 165 dev_err(&pdev->dev, "failed to build keymap\n");
> > > 166 return error;
> > > 167 }
> > > 168
> > > 169 input_set_drvdata(input_dev, keypad_data);
> > > 170
> > > 171 keypad_data->input_dev = input_dev;
> > > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> > >
> > > this line here. This driver has never worked and it was included almost
> > > five years ago. Is it worth fixing?
> > >
> > > 172
> > > 173 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > > 174 keypad_data->base = devm_ioremap_resource(&pdev->dev, res);
> > > 175 if (IS_ERR(keypad_data->base))
> > > 176 return PTR_ERR(keypad_data->base);
> > > 177
> > >
> > > regards,
> > > dan carpenter
> > >
> >
> > Here is the interesting thing, I was looking on patchwork, and several
> > of the patches including what appears to be the latest actually set
> > "keypad_data->input_dev = input_dev" before calling
> > "keypad_matrix_key_parse_dt"
> >
> > From v4 on patchwork
> > + if (IS_ERR(keypad_data->clk)) {
> > + dev_err(&pdev->dev, "cannot get clock");
> > + return PTR_ERR(keypad_data->clk);
> > + }
> > +
> > + keypad_data->input_dev = input_dev;
> > +
> > + input_dev->name = pdev->name;
> > + input_dev->phys = "keyscan-keys/input0";
> > + input_dev->dev.parent = &pdev->dev;
> > + input_dev->open = keyscan_open;
> > + input_dev->close = keyscan_close;
> > +
> > + input_dev->id.bustype = BUS_HOST;
> > +
> > + error = keypad_matrix_key_parse_dt(keypad_data);
> >
> > According to patchwork, these aren't listed as accepted, so I'm not
> > sure where the exact accepted patch came from. Looking at the commit
> > log, it looks like the issue you showed above was made in the original
> > commit 062589b1399176a9c14bc68e16169f40439d658c so I'm not quite sure
> > what is going on here. Maybe the maintainer can chime in with the
> > original patch/mailing list discussion on this. For reference, I've
> > added the patchwork links below
> > https://patchwork.kernel.org/patch/3854341/
> > https://patchwork.kernel.org/patch/3968891/
> > https://patchwork.kernel.org/patch/3969991/
>
> It may very well be that I messed up when applying the patch. I guess
> whatever platform that is using the driver has not attempted to update
> their kernel since then.
>
> Thanks.
>
> --
> Dmitry
Hi Dmitry,
Thanks for the quick response. Yes I was just looking at the other
mailing lists patchwork and while comments were missing on the
linux-input list for the v4 patch, there was a discussion on the
regular kernel mailing list:
https://lore.kernel.org/patchwork/patch/455450/#630445
It looks like you told him he didn't need to submit a v5 but generated
one based on the changes suggested in the discussion:
[begin quote]
On Wed, Apr 16, 2014 at 10:49:29AM +0200, Gabriel Fernandez wrote:
> On 13 April 2014 07:10, Dmitry Torokhov <dmitry.torokhov@gmail.com> wrote:
> >
> > Does the version of the patch below still work for you?
> >
> Yes it's was tested on b2000 and b2089 sti boards.
>
> > Thanks.
> >
> > --
> > Dmitry
> >
> Thanks for yours remarks, i will prepare a v5 versions.
If the version I sent to you works then you do not need to prepare v5,
I'll just apply what I have.
Thanks!
[end quote]
So I guess Dan's original question remains, should this be fixed
considering it's so old and apparently nobody could possibly be using
it in the kernel since it doesn't work (in which case the driver
should probably be dropped) or should we fix it?
Thanks,
Ken Sloat
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [bug report] Input: add st-keyscan driver
2019-01-27 1:20 ` Ken Sloat
@ 2019-01-30 8:58 ` Gabriel FERNANDEZ
0 siblings, 0 replies; 4+ messages in thread
From: Gabriel FERNANDEZ @ 2019-01-30 8:58 UTC (permalink / raw)
To: Ken Sloat, Dmitry Torokhov
Cc: Dan Carpenter, linux-input, lkml, Nate Drude, Giuseppe CONDORELLI
Hi all,
I prefer to fix it. I guess people used their own correction.
I will send you a fix asap.
Best Regards
Gabriel
On 1/27/19 2:20 AM, Ken Sloat wrote:
> On Sat, Jan 26, 2019 at 5:15 PM Dmitry Torokhov
> <dmitry.torokhov@gmail.com> wrote:
>> On Sat, Jan 26, 2019 at 1:25 PM Ken Sloat
>> <ken.sloat@ohmlinxelectronics.com> wrote:
>>> On Tue, Jan 22, 2019 at 1:53 PM Dan Carpenter <dan.carpenter@oracle.com> wrote:
>>>> Hello Gabriel FERNANDEZ,
>>> Hello Dan,
>>>
>>> I have added CCs for the maintainers as well as Gabriel Fernandez as
>>> currently you just have the linux-input mailing list
>>>
>>>> The patch 062589b13991: "Input: add st-keyscan driver" from Apr 12,
>>>> 2014, leads to the following static checker warning:
>>>>
>>>> drivers/input/keyboard/st-keyscan.c:156 keyscan_probe()
>>>> error: potential zalloc NULL dereference: 'keypad_data->input_dev'
>>>>
>>>> drivers/input/keyboard/st-keyscan.c
>>>> 125 static int keyscan_probe(struct platform_device *pdev)
>>>> 126 {
>>>> 127 struct st_keyscan *keypad_data;
>>>> 128 struct input_dev *input_dev;
>>>> 129 struct resource *res;
>>>> 130 int error;
>>>> 131
>>>> 132 if (!pdev->dev.of_node) {
>>>> 133 dev_err(&pdev->dev, "no DT data present\n");
>>>> 134 return -EINVAL;
>>>> 135 }
>>>> 136
>>>> 137 keypad_data = devm_kzalloc(&pdev->dev, sizeof(*keypad_data),
>>>> 138 GFP_KERNEL);
>>>> 139 if (!keypad_data)
>>>> 140 return -ENOMEM;
>>>> 141
>>>> 142 input_dev = devm_input_allocate_device(&pdev->dev);
>>>> 143 if (!input_dev) {
>>>> 144 dev_err(&pdev->dev, "failed to allocate the input device\n");
>>>> 145 return -ENOMEM;
>>>> 146 }
>>>> 147
>>>> 148 input_dev->name = pdev->name;
>>>> 149 input_dev->phys = "keyscan-keys/input0";
>>>> 150 input_dev->dev.parent = &pdev->dev;
>>>> 151 input_dev->open = keyscan_open;
>>>> 152 input_dev->close = keyscan_close;
>>>> 153
>>>> 154 input_dev->id.bustype = BUS_HOST;
>>>> 155
>>>> --> 156 error = keypad_matrix_key_parse_dt(keypad_data);
>>>> ^^^^^^^^^^^
>>> I agree with you this would be a problem
>>> to clarify the NULL derefence would occur here within keypad_matrix_key_parse_dt
>>>
>>> struct device *dev = keypad_data->input_dev->dev.parent;
>>>
>>>> This assumes we have set "keypad_data->input_dev = input_dev;" but we
>>>> don't do that until...
>>>>
>>>> 157 if (error)
>>>> 158 return error;
>>>> 159
>>>> 160 error = matrix_keypad_build_keymap(NULL, NULL,
>>>> 161 keypad_data->n_rows,
>>>> 162 keypad_data->n_cols,
>>>> 163 NULL, input_dev);
>>>> 164 if (error) {
>>>> 165 dev_err(&pdev->dev, "failed to build keymap\n");
>>>> 166 return error;
>>>> 167 }
>>>> 168
>>>> 169 input_set_drvdata(input_dev, keypad_data);
>>>> 170
>>>> 171 keypad_data->input_dev = input_dev;
>>>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>>>>
>>>> this line here. This driver has never worked and it was included almost
>>>> five years ago. Is it worth fixing?
>>>>
>>>> 172
>>>> 173 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>>>> 174 keypad_data->base = devm_ioremap_resource(&pdev->dev, res);
>>>> 175 if (IS_ERR(keypad_data->base))
>>>> 176 return PTR_ERR(keypad_data->base);
>>>> 177
>>>>
>>>> regards,
>>>> dan carpenter
>>>>
>>> Here is the interesting thing, I was looking on patchwork, and several
>>> of the patches including what appears to be the latest actually set
>>> "keypad_data->input_dev = input_dev" before calling
>>> "keypad_matrix_key_parse_dt"
>>>
>>> From v4 on patchwork
>>> + if (IS_ERR(keypad_data->clk)) {
>>> + dev_err(&pdev->dev, "cannot get clock");
>>> + return PTR_ERR(keypad_data->clk);
>>> + }
>>> +
>>> + keypad_data->input_dev = input_dev;
>>> +
>>> + input_dev->name = pdev->name;
>>> + input_dev->phys = "keyscan-keys/input0";
>>> + input_dev->dev.parent = &pdev->dev;
>>> + input_dev->open = keyscan_open;
>>> + input_dev->close = keyscan_close;
>>> +
>>> + input_dev->id.bustype = BUS_HOST;
>>> +
>>> + error = keypad_matrix_key_parse_dt(keypad_data);
>>>
>>> According to patchwork, these aren't listed as accepted, so I'm not
>>> sure where the exact accepted patch came from. Looking at the commit
>>> log, it looks like the issue you showed above was made in the original
>>> commit 062589b1399176a9c14bc68e16169f40439d658c so I'm not quite sure
>>> what is going on here. Maybe the maintainer can chime in with the
>>> original patch/mailing list discussion on this. For reference, I've
>>> added the patchwork links below
>>> https://patchwork.kernel.org/patch/3854341/
>>> https://patchwork.kernel.org/patch/3968891/
>>> https://patchwork.kernel.org/patch/3969991/
>> It may very well be that I messed up when applying the patch. I guess
>> whatever platform that is using the driver has not attempted to update
>> their kernel since then.
>>
>> Thanks.
>>
>> --
>> Dmitry
> Hi Dmitry,
>
> Thanks for the quick response. Yes I was just looking at the other
> mailing lists patchwork and while comments were missing on the
> linux-input list for the v4 patch, there was a discussion on the
> regular kernel mailing list:
> https://lore.kernel.org/patchwork/patch/455450/#630445
>
> It looks like you told him he didn't need to submit a v5 but generated
> one based on the changes suggested in the discussion:
>
> [begin quote]
> On Wed, Apr 16, 2014 at 10:49:29AM +0200, Gabriel Fernandez wrote:
>> On 13 April 2014 07:10, Dmitry Torokhov <dmitry.torokhov@gmail.com> wrote:
>>> Does the version of the patch below still work for you?
>>>
>> Yes it's was tested on b2000 and b2089 sti boards.
>>
>>> Thanks.
>>>
>>> --
>>> Dmitry
>>>
>> Thanks for yours remarks, i will prepare a v5 versions.
>
> If the version I sent to you works then you do not need to prepare v5,
> I'll just apply what I have.
>
> Thanks!
> [end quote]
>
> So I guess Dan's original question remains, should this be fixed
> considering it's so old and apparently nobody could possibly be using
> it in the kernel since it doesn't work (in which case the driver
> should probably be dropped) or should we fix it?
>
> Thanks,
> Ken Sloat
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-01-30 8:59 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <20190122185351.GA28627@kadam>
2019-01-26 21:25 ` [bug report] Input: add st-keyscan driver Ken Sloat
2019-01-26 22:15 ` Dmitry Torokhov
2019-01-27 1:20 ` Ken Sloat
2019-01-30 8:58 ` Gabriel FERNANDEZ
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).